This page is part of the Validated Healthcare Directory FHIR IG (v0.2.0: STU 1 Ballot 2) based on FHIR v3.5.0. . For a full list of available versions, see the Directory of published versions
Definitions for the StructureDefinition-vhdir-practitioner Profile.
Practitioner | |
Definition | A person who is directly or indirectly involved in the provisioning of healthcare. |
Control | 0..* |
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.div.exists()) |
Practitioner.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Control | 0..1 |
Type | id |
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. |
Practitioner.meta | |
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. |
Control | 0..1 |
Type | Meta |
Practitioner.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Practitioner.language | |
Definition | The base language in which the resource is written. |
Control | 0..1 |
Binding | A human language. The codes SHOULD be taken from Common Languages |
Type | code |
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). |
Practitioner.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Control | 0..1 |
Type | Narrative |
Alternate Names | narrative, html, xhtml, display |
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Practitioner.contained | |
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. |
Control | 0..* |
Type | Resource |
Alternate Names | inline resources, anonymous resources, contained resources |
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. |
Practitioner.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/usage-restriction]]) | |
Definition | Identifies and conveys information about restrictions on the use or release of exchanged information, e.g. information that can only be shared under particular condition, such as a signed data use agreement between parties |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Reference(VhdirRestriction)) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/endpoint-reference]]) | |
Definition | A reference to the endpoint resource |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Reference(VhdirEndpoint)) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/accessibility]]) | |
Definition | Accessibility options offered to the patient/consumer |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | (Extension Type: CodeableConcept) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/digitalcertificate]]) | |
Definition | A digital certificate, used to identify a user or group of users, or for encrypted communications |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.identifier | |
Definition | An identifier that applies to this person in this role. |
Note | This is a business identifer, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Requirements | Often, specific identities are assigned for the agent. |
Practitioner.identifier.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.identifier.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.identifier.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/identifier-status]]) | |
Definition | Describes the status of an identifier |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | (Extension Type: code) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.identifier.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.identifier.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.identifier.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/uv/vhdir/StructureDefinition/identifier-status |
Practitioner.identifier.extension.valueCode(valueCode) | |
Definition | Describes the status of an identifier |
Control | 1..1 |
Binding | For example codes, see VhDirIdentifierStatus |
Type | code |
Practitioner.identifier.use | |
Definition | The purpose of this identifier. |
Control | 0..1 |
Binding | Identifies the purpose for this identifier, if known . The codes SHALL be taken from IdentifierUse |
Type | code |
Is Modifier | true |
Requirements | Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. |
Comments | Applications can assume that an identifier is permanent unless it explicitly says that it is temporary. |
Practitioner.identifier.type | |
Definition | A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. |
Control | 0..1 |
Binding | A coded type for an identifier that can be used to determine which identifier to use for a specific purpose. The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable |
Type | CodeableConcept |
Requirements | Allows users to make use of identifiers when the identifier system is not known. |
Comments | This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type. |
Practitioner.identifier.system | |
Definition | Establishes the namespace for the value - that is, a URL that describes a set values that are unique. |
Control | 0..1 |
Type | uri |
Requirements | There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. |
Comments | Identifier.system is always case sensitive. |
Example | General:http://www.acme.com/identifiers/patient |
Practitioner.identifier.value | |
Definition | The portion of the identifier typically relevant to the user and which is unique within the context of the system. |
Control | 0..1 |
Type | string |
Comments | If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe. |
Example | General:123456 |
Practitioner.identifier.period | |
Definition | Time period during which identifier is/was valid for use. |
Control | 0..1 |
Type | Period |
Practitioner.identifier.assigner | |
Definition | Organization that issued/manages the identifier. |
Control | 0..1 |
Type | Reference(VhdirOrganization) |
Comments | The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization. |
Practitioner.active | |
Definition | Whether this practitioner's record is in active use. |
Control | 1..1 |
Type | boolean |
Requirements | Need to be able to mark a practitioner record as not to be used because it was created in error. |
Comments | If the practitioner is not in use by one organization, then it should mark the period on the PractitonerRole with an end date (even if they are active) as they may be active in another role. |
Meaning if Missing | This resource is generally assumed to be active if no value is provided for the active element |
Practitioner.name | |
Definition | The name(s) associated with the practitioner. |
Control | 1..* |
Type | HumanName |
Requirements | The name(s) that a Practitioner is known by. Where there are multiple, the name that the practitioner is usually known as should be used in the display. |
Comments | The selection of the use property should ensure that there is a single usual name specified, and others use the nickname (alias), old, or other values as appropriate. In general, select the value to be used in the ResourceReference.display based on this:
|
Practitioner.name.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.name.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.name.use | |
Definition | Identifies the purpose for this name. |
Control | 0..1 |
Binding | The use of a human name. The codes SHALL be taken from NameUse |
Type | code |
Is Modifier | true |
Requirements | Allows the appropriate name for a particular context of use to be selected from among a set of names. |
Comments | Applications can assume that a name is current unless it explicitly says that it is temporary or old. |
Practitioner.name.text | |
Definition | Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts. |
Control | 0..1 |
Type | string |
Requirements | A renderable, unencoded form. |
Comments | Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
Practitioner.name.family | |
Definition | The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father. |
Control | 1..1 |
Type | string |
Alternate Names | surname |
Comments | Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures). |
Practitioner.name.given | |
Definition | Given name. |
Control | 1..* |
Type | string |
Alternate Names | first name, middle name |
Comments | If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first. |
Practitioner.name.prefix | |
Definition | Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name. |
Control | 0..* |
Type | string |
Practitioner.name.suffix | |
Definition | Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name. |
Control | 0..* |
Type | string |
Practitioner.name.period | |
Definition | Indicates the period of time when this name was valid for the named person. |
Control | 0..1 |
Type | Period |
Requirements | Allows names to be placed in historical context. |
Practitioner.telecom | |
Definition | A contact detail for the practitioner, e.g. a telephone number or an email address. |
Control | 0..* |
Type | ContactPoint |
Requirements | Need to know how to reach a practitioner independent to any roles the practitioner may have. |
Comments | Person may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and to help with identification. These typically will have home numbers, or mobile numbers that are not role specific. |
Practitioner.telecom.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.telecom.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/contactpoint-viaintermediary]]) | |
Definition | Represents an external point of contact responsible for handling communications with this entity |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Reference(VhdirPractitionerRole | VhdirOrganization | VhdirOrganizationAffiliation | VhdirLocation)) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.telecom.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.telecom.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/uv/vhdir/StructureDefinition/contactpoint-viaintermediary |
Practitioner.telecom.extension.valueReference(valueReference) | |
Definition | Represents an external point of contact responsible for handling communications with this entity |
Control | 1..1 |
Type | Reference(VhdirPractitionerRole | VhdirOrganization | VhdirOrganizationAffiliation | VhdirLocation) |
Practitioner.telecom.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/contactpoint-availabletime]]) | |
Definition | Time period when the contact point is to be used |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.telecom.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.telecom.extension.extension(daysOfWeek) | |
Definition | Days of the week - mon|tue|wed|thu|fri|sat|sun |
Control | 0..* |
Type | Extension |
Practitioner.telecom.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.telecom.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | daysOfWeek |
Practitioner.telecom.extension.extension.valueCode(valueCode) | |
Definition | Days of the week - mon|tue|wed|thu|fri|sat|sun |
Control | 1..1 |
Binding | The codes SHALL be taken from DaysOfWeek |
Type | code |
Practitioner.telecom.extension.extension(allDay) | |
Definition | Always available? e.g. 24 hour service |
Control | 0..1 |
Type | Extension |
Practitioner.telecom.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.telecom.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | allDay |
Practitioner.telecom.extension.extension.valueBoolean(valueBoolean) | |
Definition | Always available? e.g. 24 hour service |
Control | 1..1 |
Type | boolean |
Practitioner.telecom.extension.extension(availableStartTime) | |
Definition | Opening time of day (ignored if allDay = true) |
Control | 0..1 |
Type | Extension |
Practitioner.telecom.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.telecom.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | availableStartTime |
Practitioner.telecom.extension.extension.valueTime(valueTime) | |
Definition | Opening time of day (ignored if allDay = true) |
Control | 1..1 |
Type | time |
Practitioner.telecom.extension.extension(availableEndTime) | |
Definition | Closing time of day (ignored if allDay = true) |
Control | 0..1 |
Type | Extension |
Practitioner.telecom.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.telecom.extension.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.telecom.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | availableEndTime |
Practitioner.telecom.extension.extension.valueTime(valueTime) | |
Definition | Closing time of day (ignored if allDay = true) |
Control | 1..1 |
Type | time |
Practitioner.telecom.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/uv/vhdir/StructureDefinition/contactpoint-availabletime |
Practitioner.telecom.extension.value[x] | |
Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
Control | 0..0 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Practitioner.telecom.system | |
Definition | Telecommunications form for contact point - what communications system is required to make use of the contact. |
Control | 1..1 This element is affected by the following invariants: cpt-2 |
Binding | Telecommunications form for contact point. The codes SHALL be taken from ContactPointSystem |
Type | code |
Practitioner.telecom.value | |
Definition | The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address). |
Control | 1..1 |
Type | string |
Requirements | Need to support legacy numbers that are not in a tightly controlled format. |
Comments | Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value. |
Practitioner.telecom.use | |
Definition | Identifies the purpose for the contact point. |
Control | 0..1 |
Binding | Use of contact point. The codes SHALL be taken from ContactPointUse |
Type | code |
Is Modifier | true |
Requirements | Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose. |
Comments | Applications can assume that a contact is current unless it explicitly says that it is temporary or old. |
Practitioner.telecom.rank | |
Definition | Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values. |
Control | 0..1 |
Type | positiveInt |
Comments | Note that rank does not necessarily follow the order in which the contacts are represented in the instance. |
Practitioner.telecom.period | |
Definition | Time period when the contact point was/is in use. |
Control | 0..1 |
Type | Period |
Practitioner.address | |
Definition | Address(es) of the practitioner that are not role specific (typically home address). Work addresses are not typically entered in this property as they are usually role dependent. |
Control | 0..* |
Type | Address |
Requirements | The home/mailing address of the practitioner is often required for employee administration purposes, and also for some rostering services where the start point (practitioners home) can be used in calculations. |
Comments | The PractitionerRole does not have an address value on it, as it is expected that the location property be used for this purpose (which has an address). |
Practitioner.address.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.address.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.address.extension ([CanonicalType[http://hl7.org/fhir/StructureDefinition/geolocation]]) | |
Definition | The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML). |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage) |
Comments | The extension can be further extended to include unique geolocation identifiers, confidence, altitude, etc. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.address.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.address.extension.extension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..* |
Type | Extension |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.address.extension.extension(latitude) | |
Definition | Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below). |
Control | 1..1 |
Type | Extension |
Practitioner.address.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.address.extension.extension.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Practitioner.address.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | latitude |
Practitioner.address.extension.extension.valueDecimal | |
Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
Control | 0..1 |
Type | decimal |
Practitioner.address.extension.extension(longitude) | |
Definition | Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below). |
Control | 1..1 |
Type | Extension |
Practitioner.address.extension.extension.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.address.extension.extension.extension | |
Definition | An Extension |
Control | 0..0 |
Type | Extension |
Practitioner.address.extension.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | longitude |
Practitioner.address.extension.extension.valueDecimal | |
Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
Control | 0..1 |
Type | decimal |
Practitioner.address.extension.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/StructureDefinition/geolocation |
Practitioner.address.extension.value[x] | |
Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
Control | 0..0 |
Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Practitioner.address.use | |
Definition | The purpose of this address. |
Control | 0..1 |
Binding | The use of an address. The codes SHALL be taken from AddressUse |
Type | code |
Is Modifier | true |
Requirements | Allows an appropriate address to be chosen from a list of many. |
Comments | Applications can assume that an address is current unless it explicitly says that it is temporary or old. |
Example | General:home |
Practitioner.address.type | |
Definition | Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both. |
Control | 0..1 |
Binding | The type of an address (physical / postal). The codes SHALL be taken from AddressType |
Type | code |
Comments | The definition of Address states that "address is for postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination. |
Example | General:both |
Practitioner.address.text | |
Definition | Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts. |
Control | 0..1 |
Type | string |
Requirements | A renderable, unencoded form. |
Comments | Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part. |
Example | General:137 Nowhere Street, Erewhon 9132 |
Practitioner.address.line | |
Definition | This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information. |
Control | 0..* |
Type | string |
Example | General:137 Nowhere Street |
Practitioner.address.city | |
Definition | The name of the city, town, suburb, village or other community or delivery center. |
Control | 0..1 |
Type | string |
Alternate Names | Municpality |
Example | General:Erewhon |
Practitioner.address.district | |
Definition | The name of the administrative area (county). |
Control | 0..1 |
Type | string |
Alternate Names | County |
Comments | District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead. |
Example | General:Madison |
Practitioner.address.state | |
Definition | Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes). |
Control | 0..1 |
Type | string |
Alternate Names | Province, Territory |
Practitioner.address.postalCode | |
Definition | A postal code designating a region defined by the postal service. |
Control | 0..1 |
Type | string |
Alternate Names | Zip |
Example | General:9132 |
Practitioner.address.country | |
Definition | Country - a nation as commonly understood or generally accepted. |
Control | 0..1 |
Type | string |
Comments | ISO 3166 3 letter codes can be used in place of a human readable country name. |
Practitioner.address.period | |
Definition | Time period when address was/is in use. |
Control | 0..1 |
Type | Period |
Requirements | Allows addresses to be placed in historical context. |
Example | General:<valuePeriod xmlns="http://hl7.org/fhir"> <start value="2010-03-23"/> <end value="2010-07-01"/> </valuePeriod> |
Practitioner.gender | |
Definition | Administrative Gender - the gender that the person is considered to have for administration and record keeping purposes. |
Control | 0..1 |
Binding | The gender of a person used for administrative purposes. The codes SHALL be taken from AdministrativeGender |
Type | code |
Requirements | Needed to address the person correctly. |
Practitioner.birthDate | |
Definition | The date of birth for the practitioner. |
Control | 0..1 |
Type | date |
Requirements | Needed for identification. |
Practitioner.photo | |
Definition | Image of the person. |
Control | 0..1 |
Type | Attachment |
Requirements | Many EHR systems have the capability to capture an image of patients and personnel. Fits with newer social media usage too. |
Practitioner.qualification | |
Definition | The official certifications, training, and licenses that authorize or otherwise pertain to the provision of care by the practitioner. For example, a medical license issued by a medical board authorizing the practitioner to practice medicine within a certian locality. |
Control | 0..* |
Type | BackboneElement |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Practitioner.qualification.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.qualification.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.qualification.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/practitioner-qualification]]) | |
Definition | Extension to practitioner.qualification adding the status of the qualification, where it is valid, and the history of the qualification |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | (Extension Type: Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ParameterDefinition, DataRequirement, RelatedArtifact, ContactDetail, Contributor, TriggerDefinition, Expression, UsageContext, Dosage) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.qualification.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Practitioner.qualification.identifier | |
Definition | An identifier that applies to this person's qualification in this role. |
Note | This is a business identifer, not a resource identifier (see discussion) |
Control | 0..* |
Type | Identifier |
Requirements | Often, specific identities are assigned for the qualification. |
Practitioner.qualification.code | |
Definition | Coded representation of the qualification. |
Control | 1..1 |
Binding | Specific qualification the practitioner has to provide a service. For example codes, see http://terminology.hl7.org/ValueSet/v2-2.7-0360 |
Type | CodeableConcept |
Practitioner.qualification.period | |
Definition | Period during which the qualification is valid. |
Control | 0..1 |
Type | Period |
Requirements | Qualifications are often for a limited period of time, and can be revoked. |
Practitioner.qualification.issuer | |
Definition | Organization that regulates and issues the qualification. |
Control | 1..1 |
Type | Reference(VhdirOrganization) |
Practitioner.communication | |
Definition | A language the practitioner can use in patient communication. |
Control | 0..* |
Binding | A human language. The codes SHOULD be taken from Common Languages |
Type | CodeableConcept |
Requirements | Knowing which language a practitioner speaks can help in facilitating communication with patients. |
Comments | The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems code this but instead have it as free text. Hence CodeableConcept instead of code as the data type. |
Practitioner.communication.id | |
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
Control | 0..1 |
Type | string |
Practitioner.communication.extension | |
Definition | An Extension |
Control | 0..* |
Type | Extension |
Practitioner.communication.extension ([CanonicalType[http://hl7.org/fhir/uv/vhdir/StructureDefinition/communication-proficiency]]) | |
Definition | Level of proficiency |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | (Extension Type: CodeableConcept) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Practitioner.communication.coding | |
Definition | A reference to a code defined by a terminology system. |
Control | 0..* |
Type | Coding |
Requirements | Allows for alternative encodings within a code system, and translations to other code systems. |
Comments | Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. |
Practitioner.communication.text | |
Definition | A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. |
Control | 0..1 |
Type | string |
Requirements | The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. |
Comments | Very often the text is the same as a displayName of one of the codings. |