Data Exchange For Quality Measures Implementation Guide
5.0.0-ballot - STU5 Ballot United States of America flag

This page is part of the Da Vinci Data Exchange for Quality Measures (DEQM) FHIR IG (v5.0.0-ballot: STU5 (v5.0.0) Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 4.0.0. For a full list of available versions, see the Directory of published versions

Resource Profile: DEQM Individual MeasureReport Profile

Official URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/indv-measurereport-deqm Version: 5.0.0-ballot
Active as of 2021-04-23 Computable Name: DEQMIndividualMeasureReportProfile
Other Identifiers: OID:2.16.840.1.113883.4.642.40.2.42.26

MeasureReport is used as an organizer for both data exchange for measure and for measure reporting. Three profiles on the MeasureReport resource are defined in this guide to delineate these different uses. The DEQM Individual MeasureReport Profile defined here is used when a measure is reported to an aggregator for one specific subject. It contains all of the data that is relevant to generate the report including the measure outcome and is similar to a QRDA Category 1 report. In addition to the MeasureReport, the report would be collected in a Bundle with the reporter, subject, and any other resources that were used to calculate this measure.

Mandatory Data Elements and Terminology

The following data-elements are mandatory (i.e data MUST be present).

Each MeasureReport Must Have:

  1. status: complete | pending | error
  2. type: individual | subject-list | summary | data-collection
  3. measure: What measure was calculated
  4. period: What period the report covers
  5. group.stratifier.stratum.component.code: What stratifier component of the group
  6. group.stratifier.stratum.component.value: The stratum component value, e.g. male

Each MeasureReport Must Support:

  1. reportingProgram: Reporting program
  2. inputParameters: What parameters
  3. supplementalData: Supplemental Data
  4. scoring: proportion | ratio | continuous-variable | cohort | composite
  5. vendor: Vendor information
  6. cehrt: CMS EHR Certifciation ID
  7. software: Extension
  8. message: Evaluation messages
  9. popref: Criteria reference

Additional Profile specific implementation guidance:

  • The MeasureReport.group.population.id is a must support element because it is used to link across the Measure and is equal to the Measure.population.group.id. This is needed because the MeasureReport.group.population.code is insufficient when the measure types have multiple populations with the same code.

  • If the measure scoring type is 'proportion', 'ratio', or 'continuous-variable' then the improvementNotation element is required.

  • If the measure scoring type is 'proportion' then the MeasureReport.group.measureScore.value SHALL be a numerical value between 0 and 1.

  • The reporter should be consistent with the X-Provenance header data if present.

  • the DEQM Reporting Vendor Extension is intended to represent the submitting entity when it is not the same as the reporting entity.

  • There are some elements like scoring and improvementNotation that can be specified either at the measure level or at the group level. If it is reported at the measure level it should not be specified for any group and if it is specified for any group it should be specified for every group and not at the measure level.

Examples

Usage:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from MeasureReport

NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... Slices for extension Content/Rules for all slices
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... Slices for extension Content/Rules for all slices
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
...... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... status S
... type S code Fixed Value: individual
... measure S canonical(CRMI Shareable Measure)
... subject S 1..1 Reference(QICore Patient | QICore Practitioner | QICore PractitionerRole | QICore Location | QICore Device | QICore RelatedPerson | QICore Simple Observation)
... date S 1..1 When the report was generated. Note: The language in R5 was changed to calculated. We are clarifying that intent.
... reporter S 1..1 Reference(QICore Organization) Organization that generated the MeasureReport
.... Slices for extension Content/Rules for all slices
..... group S 0..1 Reference(Group) Group of practitioners responsible for a report
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reporterGroup
... period SC 1..1 Period The period for which the report was calculated. For the gaps in care use case, this is referred to as the gaps through period.
deqm-1: Date precision SHALL be at least to day ( YYYY-MM-DD )
.... start S 1..1
.... end S 1..1
... improvementNotation SC 0..1
... group SC 0..* deqm-4: If the measure scoring is specified on the group and the scoring type is 'proportion', 'ratio', or 'continuous-variable' then the groupImprovementNotation element is required.
.... id S
.... Slices for extension Content/Rules for all slices
..... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
..... calculatedDate S 0..1 dateTime The date the score was calculated
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-calculatedDate
..... groupImprovementNotation SC 0..1 CodeableConcept increase | decrease
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-groupImprovementNotation
Binding: MeasureImprovementNotation (extensible)
..... description S 0..1 markdown Description of the group
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... numeratorMembership S 0..1 Quantity Provides the number of subjects in the numerator population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-numeratorMembership
..... denominatorMembership S 0..1 Quantity Provides the number of subjects in the denominator population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-denominatorMembership
..... measurePopulationMembership S 0..1 Quantity Provides the number of subjects in the measure population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-measurePopulationMembership
.... code S
.... population SC deqm-8: The population must either have a count (integer) or a countQuantity (quantity), but not both.
..... Slices for extension Content/Rules for all slices
...... countQuantity SC 0..1 Quantity Count as a Quantity
URL: http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity
...... description S 0..1 markdown Description of the population
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... code S 1..1
..... count SC 0..1
..... subjectResults 0..0
.... measureScore SC 0..1
..... Slices for extension Content/Rules for all slices
...... altscoretype S 0..1 dateTime, CodeableConcept, Period, Range, Duration, boolean Possible additional measureScore value types
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-alternateScoreType
.... stratifier
..... Slices for extension Content/Rules for all slices
...... description S 0..1 markdown Description of the stratifier
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... code S 0..1 CodeableConcept What stratifier of the group
..... stratum S
...... population SC deqm-9: The stratum population must either have a count (integer) or a countQuantity (quantity), but not both.
....... measurereport-countQuantity SC 0..1 Quantity Size of the population as a quantity.
URL: http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity
....... code S 1..1
....... count SC 1..1
... evaluatedResource S

doco Documentation for this format

Constraints

IdGradePath(s)DetailsRequirements
deqm-1errorMeasureReport.periodDate precision SHALL be at least to day ( YYYY-MM-DD )
: start.toString().length()>9 and end.toString().length()>9
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-4errorMeasureReport.groupIf the measure scoring is specified on the group and the scoring type is 'proportion', 'ratio', or 'continuous-variable' then the groupImprovementNotation element is required.
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable')) implies extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-groupImprovementNotation').exists()
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()
deqm-8errorMeasureReport.group.populationThe population must either have a count (integer) or a countQuantity (quantity), but not both.
: extension('http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity').exists() xor count.exists()
deqm-9errorMeasureReport.group.stratifier.stratum.populationThe stratum population must either have a count (integer) or a countQuantity (quantity), but not both.
: extension('http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity').exists() xor count.exists()
NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... Slices for extension Content/Rules for all slices
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... Slices for extension Content/Rules for all slices
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... url 1..1 uri "http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData"
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... url 1..1 uri "http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier"
..... Slices for value[x] 1..1 Identifier Value of extension
Slice: Unordered, Closed by type:$this
...... value[x]:valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
....... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... status ?!Σ 1..1 code complete | pending | error
Binding: MeasureReportStatus (required): The status of the measure report.

... type ΣC 1..1 code individual | subject-list | summary | data-collection
Binding: MeasureReportType (required): The type of the measure report.

... measure Σ 1..1 canonical(Measure) What measure was calculated
... subject Σ 0..1 Reference(Patient | Practitioner | PractitionerRole | Location | Device | RelatedPerson | Group) What individual(s) the report is for
... date Σ 0..1 dateTime When the report was generated
... reporter Σ 0..1 Reference(Practitioner | PractitionerRole | Location | Organization) Who is reporting the data
... period Σ 1..1 Period What period the report covers
... improvementNotation ?!Σ 0..1 CodeableConcept increase | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... group C 0..* BackboneElement Measure results for each group
.... id 0..1 string Unique id for inter-element referencing
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 0..1 CodeableConcept Meaning of the group
.... population 0..* BackboneElement The populations in the group
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code Σ 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

..... count 0..1 integer Size of the population
..... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
.... measureScore Σ 0..1 Quantity What score this group achieved
... evaluatedResource 0..* Reference(Resource) What data was used to calculate the measure score
.... Slices for extension Content/Rules for all slices
..... popref S 0..* string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
MeasureReport.statusrequiredMeasureReportStatus
http://hl7.org/fhir/ValueSet/measure-report-status|4.0.1
from the FHIR Standard
MeasureReport.typerequiredMeasureReportType
http://hl7.org/fhir/ValueSet/measure-report-type|4.0.1
from the FHIR Standard
MeasureReport.improvementNotationrequiredMeasureImprovementNotation
http://hl7.org/fhir/ValueSet/measure-improvement-notation|4.0.1
from the FHIR Standard
MeasureReport.group.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()
NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... id 0..1 string Unique id for inter-element referencing
..... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... url 1..1 uri "http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData"
..... value[x] 0..1 Reference(Resource) For supplementalData that is a calculation, this will be a reference to an Observation containing the result of the supplementalData calculation. For supplementalData that is a resource, this will be a reference to the supplementalData resource.
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... url 1..1 uri "http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier"
..... Slices for value[x] 1..1 Identifier Value of extension
Slice: Unordered, Closed by type:$this
..... Slices for value[x] Content/Rules for all slices
...... value[x]:valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... use 0..1 code usual | official | temp | secondary | old (If known)
....... type 0..1 CodeableConcept Description of identifier
....... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
....... value 0..1 string The value that is unique
....... period 0..1 Period Time period when id is/was valid for use
....... assigner 0..1 Reference(Organization) Organization that issued id (may be just text)
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier Σ 0..* Identifier Additional identifier for the MeasureReport
... status ?!Σ 1..1 code complete | pending | error
Binding: MeasureReportStatus (required): The status of the measure report.

... type ΣC 1..1 code individual | subject-list | summary | data-collection
Binding: MeasureReportType (required): The type of the measure report.

... measure Σ 1..1 canonical(Measure) What measure was calculated
... subject Σ 0..1 Reference(Patient | Practitioner | PractitionerRole | Location | Device | RelatedPerson | Group) What individual(s) the report is for
... date Σ 0..1 dateTime When the report was generated
... reporter Σ 0..1 Reference(Practitioner | PractitionerRole | Location | Organization) Who is reporting the data
... period Σ 1..1 Period What period the report covers
... improvementNotation ?!Σ 0..1 CodeableConcept increase | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... group C 0..* BackboneElement Measure results for each group
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 0..1 CodeableConcept Meaning of the group
.... population 0..* BackboneElement The populations in the group
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code Σ 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

..... count 0..1 integer Size of the population
..... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
.... measureScore Σ 0..1 Quantity What score this group achieved
.... stratifier 0..* BackboneElement Stratification results
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code 0..* CodeableConcept What stratifier of the group
..... stratum 0..* BackboneElement Stratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
...... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
...... value 0..1 CodeableConcept The stratum value, e.g. male
...... component 0..* BackboneElement Stratifier component values
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
....... code 1..1 CodeableConcept What stratifier component of the group
....... value 1..1 CodeableConcept The stratum component value, e.g. male
...... population 0..* BackboneElement Population results in this stratum
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
....... code 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

....... count 0..1 integer Size of the population
....... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
...... measureScore 0..1 Quantity What score this stratum achieved
... evaluatedResource 0..* Reference(Resource) What data was used to calculate the measure score
.... id 0..1 string Unique id for inter-element referencing
.... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... popref S 0..* string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
.... reference ΣC 0..1 string Literal reference, Relative, internal or absolute URL
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
MeasureReport.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
MeasureReport.statusrequiredMeasureReportStatus
http://hl7.org/fhir/ValueSet/measure-report-status|4.0.1
from the FHIR Standard
MeasureReport.typerequiredMeasureReportType
http://hl7.org/fhir/ValueSet/measure-report-type|4.0.1
from the FHIR Standard
MeasureReport.improvementNotationrequiredMeasureImprovementNotation
http://hl7.org/fhir/ValueSet/measure-improvement-notation|4.0.1
from the FHIR Standard
MeasureReport.group.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard
MeasureReport.group.stratifier.stratum.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard
MeasureReport.evaluatedResource.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()

This structure is derived from MeasureReport

Summary

Mandatory: 0 element(10 nested mandatory elements)
Must-Support: 48 elements
Fixed: 1 element
Prohibited: 1 element

Structures

This structure refers to these other structures:

Extensions

This structure refers to these extensions:

Differential View

This structure is derived from MeasureReport

NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... Slices for extension Content/Rules for all slices
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... Slices for extension Content/Rules for all slices
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
...... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... status S
... type S code Fixed Value: individual
... measure S canonical(CRMI Shareable Measure)
... subject S 1..1 Reference(QICore Patient | QICore Practitioner | QICore PractitionerRole | QICore Location | QICore Device | QICore RelatedPerson | QICore Simple Observation)
... date S 1..1 When the report was generated. Note: The language in R5 was changed to calculated. We are clarifying that intent.
... reporter S 1..1 Reference(QICore Organization) Organization that generated the MeasureReport
.... Slices for extension Content/Rules for all slices
..... group S 0..1 Reference(Group) Group of practitioners responsible for a report
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reporterGroup
... period SC 1..1 Period The period for which the report was calculated. For the gaps in care use case, this is referred to as the gaps through period.
deqm-1: Date precision SHALL be at least to day ( YYYY-MM-DD )
.... start S 1..1
.... end S 1..1
... improvementNotation SC 0..1
... group SC 0..* deqm-4: If the measure scoring is specified on the group and the scoring type is 'proportion', 'ratio', or 'continuous-variable' then the groupImprovementNotation element is required.
.... id S
.... Slices for extension Content/Rules for all slices
..... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
..... calculatedDate S 0..1 dateTime The date the score was calculated
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-calculatedDate
..... groupImprovementNotation SC 0..1 CodeableConcept increase | decrease
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-groupImprovementNotation
Binding: MeasureImprovementNotation (extensible)
..... description S 0..1 markdown Description of the group
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... numeratorMembership S 0..1 Quantity Provides the number of subjects in the numerator population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-numeratorMembership
..... denominatorMembership S 0..1 Quantity Provides the number of subjects in the denominator population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-denominatorMembership
..... measurePopulationMembership S 0..1 Quantity Provides the number of subjects in the measure population membership.
URL: http://hl7.org/fhir/StructureDefinition/cqf-measurePopulationMembership
.... code S
.... population SC deqm-8: The population must either have a count (integer) or a countQuantity (quantity), but not both.
..... Slices for extension Content/Rules for all slices
...... countQuantity SC 0..1 Quantity Count as a Quantity
URL: http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity
...... description S 0..1 markdown Description of the population
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... code S 1..1
..... count SC 0..1
..... subjectResults 0..0
.... measureScore SC 0..1
..... Slices for extension Content/Rules for all slices
...... altscoretype S 0..1 dateTime, CodeableConcept, Period, Range, Duration, boolean Possible additional measureScore value types
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-alternateScoreType
.... stratifier
..... Slices for extension Content/Rules for all slices
...... description S 0..1 markdown Description of the stratifier
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... code S 0..1 CodeableConcept What stratifier of the group
..... stratum S
...... population SC deqm-9: The stratum population must either have a count (integer) or a countQuantity (quantity), but not both.
....... measurereport-countQuantity SC 0..1 Quantity Size of the population as a quantity.
URL: http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity
....... code S 1..1
....... count SC 1..1
... evaluatedResource S

doco Documentation for this format

Constraints

IdGradePath(s)DetailsRequirements
deqm-1errorMeasureReport.periodDate precision SHALL be at least to day ( YYYY-MM-DD )
: start.toString().length()>9 and end.toString().length()>9
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-4errorMeasureReport.groupIf the measure scoring is specified on the group and the scoring type is 'proportion', 'ratio', or 'continuous-variable' then the groupImprovementNotation element is required.
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable')) implies extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-groupImprovementNotation').exists()
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()
deqm-8errorMeasureReport.group.populationThe population must either have a count (integer) or a countQuantity (quantity), but not both.
: extension('http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity').exists() xor count.exists()
deqm-9errorMeasureReport.group.stratifier.stratum.populationThe stratum population must either have a count (integer) or a countQuantity (quantity), but not both.
: extension('http://hl7.org/fhir/StructureDefinition/measurereport-countQuantity').exists() xor count.exists()

Key Elements View

NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... Slices for extension Content/Rules for all slices
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... Slices for extension Content/Rules for all slices
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... url 1..1 uri "http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData"
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... url 1..1 uri "http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier"
..... Slices for value[x] 1..1 Identifier Value of extension
Slice: Unordered, Closed by type:$this
...... value[x]:valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
....... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... status ?!Σ 1..1 code complete | pending | error
Binding: MeasureReportStatus (required): The status of the measure report.

... type ΣC 1..1 code individual | subject-list | summary | data-collection
Binding: MeasureReportType (required): The type of the measure report.

... measure Σ 1..1 canonical(Measure) What measure was calculated
... subject Σ 0..1 Reference(Patient | Practitioner | PractitionerRole | Location | Device | RelatedPerson | Group) What individual(s) the report is for
... date Σ 0..1 dateTime When the report was generated
... reporter Σ 0..1 Reference(Practitioner | PractitionerRole | Location | Organization) Who is reporting the data
... period Σ 1..1 Period What period the report covers
... improvementNotation ?!Σ 0..1 CodeableConcept increase | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... group C 0..* BackboneElement Measure results for each group
.... id 0..1 string Unique id for inter-element referencing
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 0..1 CodeableConcept Meaning of the group
.... population 0..* BackboneElement The populations in the group
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code Σ 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

..... count 0..1 integer Size of the population
..... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
.... measureScore Σ 0..1 Quantity What score this group achieved
... evaluatedResource 0..* Reference(Resource) What data was used to calculate the measure score
.... Slices for extension Content/Rules for all slices
..... popref S 0..* string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
MeasureReport.statusrequiredMeasureReportStatus
http://hl7.org/fhir/ValueSet/measure-report-status|4.0.1
from the FHIR Standard
MeasureReport.typerequiredMeasureReportType
http://hl7.org/fhir/ValueSet/measure-report-type|4.0.1
from the FHIR Standard
MeasureReport.improvementNotationrequiredMeasureImprovementNotation
http://hl7.org/fhir/ValueSet/measure-improvement-notation|4.0.1
from the FHIR Standard
MeasureReport.group.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. MeasureReport C 0..* MeasureReport Results of a measure evaluation
mrp-1: Measure Reports used for data collection SHALL NOT communicate group and score information
mrp-2: Stratifiers SHALL be either a single criteria or a set of criteria components
deqm-2: If the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
deqm-3: ensures scoring is either specified only at the root, or on all groups
deqm-5: If the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
deqm-6: If the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
deqm-7: If group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
... contained 0..* Resource Contained, inline Resources
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
.... reportingProgram S 0..1 CodeableConcept, canonical(CQFM Publishable Manifest) Reporting program
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingProgram
Binding: Quality Programs Example (example)
.... inputParameters S 0..1 Reference(Parameters) What parameters
URL: http://hl7.org/fhir/StructureDefinition/cqf-inputParameters
.... supplementalData S 0..* (Complex) Supplemental Data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData
..... id 0..1 string Unique id for inter-element referencing
..... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
...... criteriaReference S 0..1 string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
...... description S 0..1 markdown Description of the supplemental data
URL: http://hl7.org/fhir/StructureDefinition/measurereport-populationDescription
..... url 1..1 uri "http://hl7.org/fhir/StructureDefinition/measurereport-supplementalData"
..... value[x] 0..1 Reference(Resource) For supplementalData that is a calculation, this will be a reference to an Observation containing the result of the supplementalData calculation. For supplementalData that is a resource, this will be a reference to the supplementalData resource.
.... scoring SC 0..1 CodeableConcept proportion | ratio | continuous-variable | cohort | composite
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring
Binding: MeasureScoring (extensible)
.... vendor S 0..1 Reference(QICore Organization) Vendor information
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-reportingVendor
.... cehrt S 0..1 (Complex) CMS EHR Certifciation ID
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... url 1..1 uri "http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-certificationIdentifier"
..... Slices for value[x] 1..1 Identifier Value of extension
Slice: Unordered, Closed by type:$this
..... Slices for value[x] Content/Rules for all slices
...... value[x]:valueIdentifier S 1..1 Identifier Value of extension
Required Pattern: At least the following
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... use 0..1 code usual | official | temp | secondary | old (If known)
....... type 0..1 CodeableConcept Description of identifier
....... system 1..1 uri The namespace for the identifier value
Fixed Value: urn:oid:2.16.840.1.113883.3.2074.1
....... value 0..1 string The value that is unique
....... period 0..1 Period Time period when id is/was valid for use
....... assigner 0..1 Reference(Organization) Organization that issued id (may be just text)
.... software S 0..* Reference(CRMI Software System Device) Extension
URL: http://hl7.org/fhir/uv/crmi/StructureDefinition/crmi-softwaresystem
.... location 0..* Reference(QICore Location) Location(s) from which reported data was gathered
URL: http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-dataLocation
.... message S 0..1 Reference(OperationOutcome) Evaluation messages
URL: http://hl7.org/fhir/StructureDefinition/cqf-messages
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier Σ 0..* Identifier Additional identifier for the MeasureReport
... status ?!Σ 1..1 code complete | pending | error
Binding: MeasureReportStatus (required): The status of the measure report.

... type ΣC 1..1 code individual | subject-list | summary | data-collection
Binding: MeasureReportType (required): The type of the measure report.

... measure Σ 1..1 canonical(Measure) What measure was calculated
... subject Σ 0..1 Reference(Patient | Practitioner | PractitionerRole | Location | Device | RelatedPerson | Group) What individual(s) the report is for
... date Σ 0..1 dateTime When the report was generated
... reporter Σ 0..1 Reference(Practitioner | PractitionerRole | Location | Organization) Who is reporting the data
... period Σ 1..1 Period What period the report covers
... improvementNotation ?!Σ 0..1 CodeableConcept increase | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... group C 0..* BackboneElement Measure results for each group
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 0..1 CodeableConcept Meaning of the group
.... population 0..* BackboneElement The populations in the group
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code Σ 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

..... count 0..1 integer Size of the population
..... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
.... measureScore Σ 0..1 Quantity What score this group achieved
.... stratifier 0..* BackboneElement Stratification results
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
..... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
..... code 0..* CodeableConcept What stratifier of the group
..... stratum 0..* BackboneElement Stratum results, one for each unique value, or set of values, in the stratifier, or stratifier components
...... id 0..1 string Unique id for inter-element referencing
...... extension 0..* Extension Additional content defined by implementations
...... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
...... value 0..1 CodeableConcept The stratum value, e.g. male
...... component 0..* BackboneElement Stratifier component values
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
....... code 1..1 CodeableConcept What stratifier component of the group
....... value 1..1 CodeableConcept The stratum component value, e.g. male
...... population 0..* BackboneElement Population results in this stratum
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
....... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
....... code 0..1 CodeableConcept initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population (e.g. initial, numerator, denominator, etc.).

....... count 0..1 integer Size of the population
....... subjectResults 0..1 Reference(List) For subject-list reports, the subject results in this population
...... measureScore 0..1 Quantity What score this stratum achieved
... evaluatedResource 0..* Reference(Resource) What data was used to calculate the measure score
.... id 0..1 string Unique id for inter-element referencing
.... Slices for extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
..... popref S 0..* string Criteria reference
URL: http://hl7.org/fhir/StructureDefinition/cqf-criteriaReference
.... reference ΣC 0..1 string Literal reference, Relative, internal or absolute URL
.... type Σ 0..1 uri Type the reference refers to (e.g. "Patient")
Binding: ResourceType (extensible): Aa resource (or, for logical models, the URI of the logical model).

.... identifier Σ 0..1 Identifier Logical reference, when literal reference is not known
.... display Σ 0..1 string Text alternative for the resource

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
MeasureReport.languagepreferredCommonLanguages
Additional Bindings Purpose
AllLanguages Max Binding
http://hl7.org/fhir/ValueSet/languages
from the FHIR Standard
MeasureReport.statusrequiredMeasureReportStatus
http://hl7.org/fhir/ValueSet/measure-report-status|4.0.1
from the FHIR Standard
MeasureReport.typerequiredMeasureReportType
http://hl7.org/fhir/ValueSet/measure-report-type|4.0.1
from the FHIR Standard
MeasureReport.improvementNotationrequiredMeasureImprovementNotation
http://hl7.org/fhir/ValueSet/measure-improvement-notation|4.0.1
from the FHIR Standard
MeasureReport.group.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard
MeasureReport.group.stratifier.stratum.population.codeextensibleMeasurePopulationType
http://hl7.org/fhir/ValueSet/measure-population
from the FHIR Standard
MeasureReport.evaluatedResource.typeextensibleResourceType
http://hl7.org/fhir/ValueSet/resource-types
from the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
deqm-2errorMeasureReportIf the measure scoring is specified at the root and the scoring type is 'proportion','ratio', or 'continuous-variable' then the improvementNotation element is required
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('proportion' | 'ratio' | 'continuous-variable') implies improvementNotation.exists()
deqm-3errorMeasureReportensures scoring is either specified only at the root, or on all groups
: extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() xor (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').exists() and group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').count() = group.count())
deqm-5errorMeasureReportIf the scoring, at either the root level or the group level, is other than composite then the group.population cardinality is >=1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() or (group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains ('composite')).not() implies group.population.count()>=1
deqm-6errorMeasureReportIf the measure scoring type is 'proportion' then the measureScore SHALL be a numerical value between 0 and 1
: (extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion' or group.extension('http://hl7.org/fhir/us/davinci-deqm/StructureDefinition/extension-measureScoring').value.coding.code contains 'proportion') implies group.all(measureScore.value >= 0.0 and measureScore.value <=1.0)
deqm-7errorMeasureReportIf group.stratifier exists, then stratifier.code or the stratifier.stratum.component.code is present, but not both
: group.stratifier.exists() implies group.stratifier.code.exists() xor group.stratifier.stratum.component.code.exists()

This structure is derived from MeasureReport

Summary

Mandatory: 0 element(10 nested mandatory elements)
Must-Support: 48 elements
Fixed: 1 element
Prohibited: 1 element

Structures

This structure refers to these other structures:

Extensions

This structure refers to these extensions:

 

Other representations of profile: CSV, Excel, Schematron

Notes:

This profile is used in the following transactions:

Individual Measure Reporting Interactions