An order for both supply of the medication and the instructions for administration of the medication to a patient. The resource is called "MedicationOrder" rather than "MedicationPrescription" to generalize the use across inpatient and outpatient settings as well as for care plans, etc.

External identifier - one that would be used by another non-FHIR system - for example a re-imbursement system might issue its own id for each prescription that is created. This is particularly important where FHIR only provides part of an entire workflow process where records have to be tracked through an entire system.

The date (and perhaps time) when the prescription was written.

A code specifying the state of the order. Generally this will be active or completed state.

The date (and perhaps time) when the prescription was stopped.

The reason why the prescription was stopped, if it was.

A link to a resource representing the person to whom the medication will be given.

SubstanceAdministration->subject->Patient.

The healthcare professional responsible for authorizing the prescription.

A link to a resource that identifies the particular occurrence of contact between patient and health care provider.

SubstanceAdministration->component->EncounterEvent.

Can be the reason or the indication for writing the prescription.

Extra information about the prescription that could not be conveyed by the other attributes.

Identifies the medication being administered. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended. Note: do not use Medication.name to describe the prescribed medication. When the only available information is a text description of the medication, Medication.code.text should be used.

Indicates how the medication is to be used by the patient.

When the dose or rate is intended to change over the entire administration period, e.g. Tapering dose prescriptions, multiple instances of dosage instructions will need to be supplied to convey the different doses/rates. Another common example in institutional settings is 'titration' of an IV medication dose to maintain a specific stated hemodynamic value or range e.g. drug x to be administered to maintain AM (arterial mean) greater than 65.

Free text dosage instructions can be used for cases where the instructions are too complex to code. The content of this attribute does not include the name or description of the medication. When coded instructions are present, the free text instructions may still be present for display to humans taking or administering the medication. It is expected that the text instructions will always be populated. If the dosage.timing attribute is also populated, then the dosage.text should reflect the same information as the timing.

Additional instructions such as "Swallow with plenty of water" which may or may not be coded.

The timing schedule for giving the medication to the patient. The Schedule data type allows many different expressions. For example: "Every 8 hours"; "Three times a day"; "1/2 an hour before breakfast for 10 days from 23-Dec 2011:"; "15 Oct 2013, 17 Oct 2013 and 1 Nov 2013".

This attribute may not always be populated while the DosageInstruction.text is expected to be populated. If both are populated, then the DosageInstruction.text should reflect the content of the Dosage.timing.

Indicates whether the Medication is only taken when needed within a specific dosing schedule (Boolean option), or it indicates the precondition for taking the Medication (CodeableConcept).

Specifically if 'boolean' datatype is selected, then the following logic applies: If set to True, this indicates that the medication is only taken when needed, within the specified schedule.

A coded specification of the anatomic site where the medication first enters the body.

A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body.

A coded value indicating the method by which the medication is introduced into or onto the body. Most commonly used for injections. For examples, Slow Push; Deep IV.

Terminologies used often pre-coordinate this term with the route and or form of administration.

The amount of therapeutic or other substance given at one administration event.

Note that this specifies the quantity of the specified medication, not the quantity for each active ingredient(s). Each ingredient amount can be communicated in the Medication resource. For example, if one wants to communicate that a tablet was 375 mg, where the dose was one tablet, you can use the Medication resource to document that the tablet was comprised of 375 mg of drug XYZ. Alternatively if the dose was 375 mg, then you may only need to use the Medication resource to indicate this was a tablet. If the example were an IV such as dopamine and you wanted to communicate that 400mg of dopamine was mixed in 500 ml of some IV solution, then this would all be communicated in the Medication resource. If the administration is not intended to be instantaneous (rate is present or timing has a duration), this can be specified to convey the total amount to be administered over the period of time as indicated by the schedule e.g. 500 ml in dose, with timing used to convey that this should be done over 4 hours.

Identifies the speed with which the medication was or will be introduced into the patient. Typically the rate for an infusion e.g. 100 ml per 1 hour or 100 ml/hr. May also be expressed as a rate per unit of time e.g. 500 ml per 2 hours. Currently we do not specify a default of '1' in the denominator, but this is being discussed. Other examples: 200 mcg/min or 200 mcg/1 minute; 1 liter/8 hours.

It is possible to supply both a rate and a doseQuantity to provide full details about how the medication is to be administered and supplied. If the rate is intended to change over time, depending on local rules/regulations, each change should be captured as a new version of the MedicationOrder with an updated rate, or captured with a new MedicationOrder with the new rate.

The maximum total quantity of a therapeutic substance that may be administered to a subject over the period of time. For example, 1000mg in 24 hours.

This is intended for use as an adjunct to the dosage when there is an upper cap. For example "2 tablets every 4 hours to a maximum of 8/day".

Indicates the specific details for the dispense or medication supply part of a medication order (also known as a Medication Prescription). Note that this information is NOT always sent with the order. There may be in some settings (e.g. hospitals) institutional or system support for completing the dispense details in the pharmacy department.

Identifies the medication being administered. This is a link to a resource that represents the medication which may be the details of the medication or simply an attribute carrying a code that identifies the medication from a known list of medications.

If only a code is specified, then it needs to be a code for a specific product. If more information is required, then the use of the medication resource is recommended.

This indicates the validity period of a prescription (stale dating the Prescription).

Indicates when the Prescription becomes valid, and when it ceases to be a dispensable Prescription.

It reflects the prescriber perspective for the validity of the prescription. Dispenses must not be made against the prescription outside of this period. The lower-bound of the Dispensing Window signifies the earliest date that the prescription can be filled for the first time. If an upper-bound is not specified then the Prescription is open-ended or will default to a stale-date based on regulations.

An integer indicating the number of additional times (aka refills or repeats) the patient can receive the prescribed medication. Usage Notes: This integer does NOT include the original order dispense. This means that if an order indicates dispense 30 tablets plus "3 repeats", then the order can be dispensed a total of 4 times and the patient can receive a total of 120 tablets.

If displaying "number of authorized refills", subtract 1 from this number.

The amount that is to be dispensed for one fill.

Identifies the period time over which the supplied product is expected to be used, or the length of time the dispense is expected to last.

In some situations, this attribute may be used instead of quantity to identify the amount supplied by how long it is expected to last, rather than the physical quantity issued, e.g. 90 days supply of medication (based on an ordered dosage) When possible, it is always better to specify quantity, as this tends to be more precise. expectedSupplyDuration will always be an estimate that can be influenced by external factors.

Indicates whether or not substitution can or should be part of the dispense. In some cases substitution must happen, in other cases substitution must not happen, and in others it does not matter. This block explains the prescriber's intent. If nothing is specified substitution may be done.

A code signifying whether a different drug should be dispensed from what was prescribed.

Indicates the reason for the substitution, or why substitution must or must not be performed.

A link to a resource representing an earlier order or prescription that this order supersedes.