HL7 FHIR® Implementation Guide: Electronic Case Reporting (eCR) - US Realm
2.0.0 - STU 2

This page is part of the electronic Case Reporting (eCR) (v2.0.0: STU 2 on FHIR R4) based on FHIR R4. The current version which supercedes this version is 2.1.0. For a full list of available versions, see the Directory of published versions

eRSD Jurisdictions CodeSystem Query

This document provides instructions for how to use the eRSD Jurisdictions CodeSystem with CQL queries to identify relevant jurisdictions for a Patient and Encounter.

Overview

The eRSD Jurisdictions CodeSystem can be used for CQL querying to determine which jurisdiction should receive eCR reports. The CQL query uses the Patient address and the Encounter location address to determine relevant jurisdictions. The relevant jurisdictions are determined by matching address postal codes with jurisdiction postal codes or by matching State codes if no postal code is specified for a jurisdiction.

Dependencies

The following tools are needed to perform this operation:

CodeSystem

The CodeSystem is in JSON format and follows FHIR specifications. An example of how jurisdictions are represented in this file is shown below:

{
  "code": "AK",
  "display": "ALASKA",
  "definition": "Alaska Department of Health and Social Services",
  "property": [
    {
      "code": "type",
      "valueCode": "STATE"
    },
    {
      "code": "state",
      "valueCode": "AK"
    }
  ]
},
{
  "code": "CA",
  "display": "CALIFORNIA",
  "definition": "California Department of Public Health",
  "property": [
    {
      "code": "type",
      "valueCode": "STATE"
    },
    {
      "code": "state",
      "valueCode": "CA"
    },
    {
      "code": "postalcode",
      "valueCode": "90041"
    },
    {
      "code": "postalcode",
      "valueCode": "90042"
    },
    {
      "code": "postalcode",
      "valueCode": "91912"
    }
  ]
},
{
  "code": "LAC",
  "display": "CALIFORNIA",
  "definition": "Los Angeles County Department of Public Health",
  "property": [
    {
      "code": "type",
      "valueCode": "COUNTY"
    },
    {
      "code": "state",
      "valueCode": "CA"
    },
    {
      "code": "postalcode",
      "valueCode": "90001"
    },
    {
      "code": "postalcode",
      "valueCode": "90002"
    }
  ]
},
{
  "code": "SDC",
  "display": "CALIFORNIA",
  "definition": "San Diego County Public Health Services",
  "property": [
    {
      "code": "type",
      "valueCode": "COUNTY"
    },
    {
      "code": "state",
      "valueCode": "CA"
    },
    {
      "code": "postalcode",
      "valueCode": "91901"
    },
    {
      "code": "postalcode",
      "valueCode": "91912"
    }
  ]
}

Each jurisdiction has a set of properties connected with it that specify what type of jurisdiction it is, which State (State, District, or Territory) the jurisdiction belongs to, and which postal codes are specified for reporting to it.

CQL Query

RuleFilter Library This file contains CQL code that uses the test cases in the /input/tests/RuleFilters-1.0.0 folder. The CodeSystem-ersd-jurisdictions.json file will need to be copied and pasted to the /input/tests/RuleFilters-1.0.0/Reportable/CodeSystem folder in order for the test cases to work.

The CQL code is setup to match Chlamydia test results with relevant jurisdictions. CQL must be run in Atom using the CQL plugin. To install the plugin, open Atom and click “File” then “Settings”. A Settings tab will open up. Navigate to “Install” and search for “cql”. Find the package named “language-cql” authored by cqframework and click “Install”.

In Atom, open the RuleFilter Library cql. The code related to jursdiction querying is as follows:

codesystem "JurisdictionsList": 'http://hl7.org/fhir/us/ecr/CodeSystem/ersd-jurisdictions'

parameter "Triggering Encounter" Encounter

context Patient

define "Encounter Location References":
  "Triggering Encounter" TriggeringEncounter
    return TriggeringEncounter.location.location

define "Locations Matching Encounter Location References":
  [Location] Location
    where exists (
        "Encounter Location References" LocationReference
          where Location.id ~ LocationReference.reference
      )

define "Encounter Location Addresses And Patient Addresses":
  "Locations Matching Encounter Location References".address
    union Patient.address

define "Address Elements Relevant to Jurisdiction Qualification":
  "Encounter Location Addresses And Patient Addresses" Address
    return Tuple { state: Address.state,  postalCode: Address.postalCode }

define "Jurisdictions":
  flatten([CodeSystem] C
    return C.concept Cpt
      return Tuple { jcode: Cpt.code, definition: Cpt.definition, scode: Cpt.property P where P.code = 'state' return P.value as FHIR.code, value: Cpt.property P where P.code = 'postalcode' return P.value as FHIR.code })

define "Address Postal Code is in Jurisdiction Codes":
  "Jurisdictions" J
    with "Address Elements Relevant to Jurisdiction Qualification" AddressElement
      such that AddressElement.postalCode in J.value

define "Address State is in Jurisdiction Codes":
    "Jurisdictions" J
      with "Address Elements Relevant to Jurisdiction Qualification" AddressElement
        such that AddressElement.state in J.scode

define function AddressJurisdictions():
  if exists ("Address Postal Code is in Jurisdiction Codes")
    then "Address Postal Code is in Jurisdiction Codes"
      else "Address State is in Jurisdiction Codes"

define "Jurisdiction Codes Relevant to Addresses":
  AddressJurisdictions()

Determining Relevant Jurisdictions

If a Patient lives in, or the Encounter takes place in a specified postal code, reporting goes to the jurisdiction specified. In some cases, a State Public Health Agency also requires reporting. In such a case, relevant postal codes are also specified for the State Public Health Agency. If no postal codes are specified for the State Public Health Agency, that agency will only receive reports for addresses within the State that are not already specified for a local jurisdiction. If a postal code is not specified anywhere, the reporting goes to the State Public Health Agency.

For example, if the Patient and Encounter addresses were in Chula Vista, CA 91912, the CQL result would be:

Jurisdiction Codes Relevant to Addresses = [Tuple {
    jurisdictionCode -> CA
    stateCode -> [CA]
    definition -> California Department of Public Health
}, Tuple {
    jurisdictionCode -> SDC
    stateCode -> [CA]
    definition -> San Diego County Public Health Services
}]

As shown, the jurisdictions relevant to the Patient and Encounter addresses are San Diego County Public Health Services and California Department of Health. This is because the postal code 91912 has been specified for both of these jurisdictions, as shown in the CodeSystem example .

If the Patient and Encounter addresses were in Los Angeles, CA 90002, the CQL result would be:

Jurisdiction Codes Relevant to Addresses = [Tuple {
    jurisdictionCode -> LAC
    stateCode -> [CA]
    definition -> Los Angeles County Department of Public Health
}]

This only reports to Los Angeles County because, as shown in the CodeSystem example, the postal code 90002 is specified for Los Angeles County and not specified for the State of California.

If the Patient and Encounter addresses were in Juneau, AK 99850, the CQL result would be:

Jurisdiction Codes Relevant to Addresses = [Tuple {
    jurisdictionCode -> AK
    stateCode -> [AK]
    definition -> Alaska Department of Health and Social Services
}]

As shown in the CodeSystem example, Alaska has no specified postal codes. Therefore, anywhere in Alaska will report only to the Alaska Department of Health and Social Services.

It may be the case that the Encounter takes place in a postal code different from that of the patient’s address. If the patient’s address was in Chula Vista, CA 91912, and the Encounter took place in Los Angeles, CA 90002, the CQL result would be:

Jurisdiction Codes Relevant to Addresses = [Tuple {
    jurisdictionCode -> CA
    stateCode -> [CA]
    definition -> California Department of Public Health
}, Tuple {
    jurisdictionCode -> SDC
    stateCode -> [CA]
    definition -> San Diego County Public Health Services
}, Tuple {
    jurisdictionCode -> LAC
    stateCode -> [CA]
    definition -> Los Angeles County Department of Public Health
}]

As shown, the jurisdictions relevant to the Patient and Encounter addresses are San Diego County Public Health Services, Los Angeles County Department of Public Health, and California Department of Health. This is because the postal code 91912 has been specified for both of these the California Department of Public Health and San Diego County Public Health Services jurisdictions and the 90002 postal code has been specified for the Los Angeles County Department of Public Health jurisdiction, as shown in the CodeSystem example .