Quality Measure Implementation Guide (STU5)
5.0.0-ballot - ballot
Quality Measure Implementation Guide (STU5)
5.0.0-ballot - ballot
This page is part of the Quality Measure STU2 for FHIR R4 Implementation Guide (v5.0.0-ballot: STU5 (v5.0.0) Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 4.0.0. For a full list of available versions, see the Directory of published versions
| Official URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/measure-cqfm | Version: 5.0.0-ballot | |||
| Active as of 2023-12-15 | Computable Name: CQFMMeasure | |||
The CQFM Measure Profile describes minimum expectations for defining an electronic Clinical Quality Measure (eCQM)
Usage:
Description of Profiles, Differentials, Snapshots and how the different presentations work.
This structure is derived from Shareable Measure
| Name | Flags | Card. | Type | Description & Constraints |
|---|---|---|---|---|
  Measure | 1..1 | Shareable Measure | A quality measure definition | |
  meta | S | 1..1 | Meta | Metadata about the resource |
  profile | S | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to |
  comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment |
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem |
 library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) |
| type | S | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) |
| group | S | 0..* | BackboneElement | Population criteria group |
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group |
| population | S | 0..* | BackboneElement | Population criteria |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) |
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
 stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure |
 id | S | 1..1 | string | Unique id for inter-element referencing |
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) |
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |
| Documentation for this format | ||||
| Path | Conformance | ValueSet |
| Measure.type | extensible | MeasureType |
| Measure.group.population.code | extensible | MeasurePopulationType |
| Measure.supplementalData.code | preferred | MeasureSupplementalData |
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() |
| Name | Flags | Card. | Type | Description & Constraints |
|---|---|---|---|---|
| Measure | C | 1..1 | Shareable Measure | A quality measure definition |
 meta | SΣ | 1..1 | Meta | Metadata about the resource |
| profile | SΣ | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to |
| implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created |
| comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment |
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem |
 modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored |
| url | Σ | 1..1 | uri | Canonical identifier for this measure, represented as a URI (globally unique) |
| identifier | SΣ | 0..* | Identifier | Additional identifier for the measure |
| version | Σ | 1..1 | string | Business version of the measure |
| name | ΣC | 1..1 | string | Name for this measure (computer friendly) |
| title | SΣ | 0..1 | string | Name for this measure (human friendly) |
| status | ?!Σ | 1..1 | code | draft | active | retired | unknown Binding: PublicationStatus (required): The lifecycle status of an artifact. |
| experimental | Σ | 1..1 | boolean | For testing purposes, not real usage |
| date | SΣ | 0..1 | dateTime | Date last changed |
| publisher | Σ | 1..1 | string | Name of the publisher (organization or individual) |
| contact | SΣ | 0..* | ContactDetail | Contact details for the publisher |
| description | Σ | 1..1 | markdown | Natural language description of the measure |
| useContext | SΣ | 0..* | UsageContext | The context that the content is intended to support |
| jurisdiction | SΣ | 0..* | CodeableConcept | Intended jurisdiction for measure (if applicable) Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use. |
| library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) |
| type | SΣ | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) |
| group | S | 0..* | BackboneElement | Population criteria group |
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| population | S | 0..* | BackboneElement | Population criteria |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) |
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) |
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |
| criteria | 1..1 | Expression | Expression describing additional data to be reported | |
| Documentation for this format | ||||
| Path | Conformance | ValueSet |
| Measure.status | required | PublicationStatus |
| Measure.jurisdiction | extensible | Jurisdiction ValueSet |
| Measure.type | extensible | MeasureType |
| Measure.group.population.code | extensible | MeasurePopulationType |
| Measure.supplementalData.code | preferred | MeasureSupplementalData |
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| dom-2 | error | Measure | If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty() | |
| dom-3 | error | Measure | If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() | |
| dom-4 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() | |
| dom-5 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty() | |
| dom-6 | best practice | Measure | A resource should have narrative for robust management : text.`div`.exists() | |
| ele-1 | error | **ALL** elements | All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count()) | |
| ext-1 | error | **ALL** extensions | Must have either extensions or value[x], not both : extension.exists() != value.exists() | |
| mea-0 | warning | Measure | Name should be usable as an identifier for the module by machine processing applications such as code generation : name.matches('[A-Z]([A-Za-z0-9_]){0,254}') | |
| mea-1 | error | Measure | Stratifier SHALL be either a single criteria or a set of criteria components : group.stratifier.all((code | description | criteria).exists() xor component.exists()) |
| Name | Flags | Card. | Type | Description & Constraints | ||||
|---|---|---|---|---|---|---|---|---|
| Measure | C | 1..1 | Shareable Measure | A quality measure definition | ||||
| id | Σ | 0..1 | id | Logical id of this artifact | ||||
| meta | SΣ | 1..1 | Meta | Metadata about the resource | ||||
| id | 0..1 | string | Unique id for inter-element referencing | |||||
 extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
| versionId | Σ | 0..1 | id | Version specific identifier | ||||
| lastUpdated | Σ | 0..1 | instant | When the resource version last changed | ||||
| source | Σ | 0..1 | uri | Identifies where the resource comes from | ||||
| profile | SΣ | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to | ||||
| security | Σ | 0..* | Coding | Security Labels applied to this resource Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System. | ||||
| tag | Σ | 0..* | Coding | Tags applied to this resource Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". | ||||
| implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created | ||||
| language | 0..1 | code | Language of the resource content Binding: CommonLanguages (preferred): A human language.
| |||||
| text | 0..1 | Narrative | Text summary of the resource, for human interpretation | |||||
| contained | 0..* | Resource | Contained, inline Resources | |||||
| Slices for extension | 0..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
| comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment | ||||
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem | ||||
| modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored | ||||
| url | Σ | 1..1 | uri | Canonical identifier for this measure, represented as a URI (globally unique) | ||||
| identifier | SΣ | 0..* | Identifier | Additional identifier for the measure | ||||
| version | Σ | 1..1 | string | Business version of the measure | ||||
| name | ΣC | 1..1 | string | Name for this measure (computer friendly) | ||||
| title | SΣ | 0..1 | string | Name for this measure (human friendly) | ||||
| subtitle | 0..1 | string | Subordinate title of the measure | |||||
| status | ?!Σ | 1..1 | code | draft | active | retired | unknown Binding: PublicationStatus (required): The lifecycle status of an artifact. | ||||
| experimental | Σ | 1..1 | boolean | For testing purposes, not real usage | ||||
 subject[x] | 0..1 | E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device Binding: SubjectType (extensible): The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.). | ||||||
| subjectCodeableConcept | CodeableConcept | |||||||
 subjectReference | Reference(Group) | |||||||
| date | SΣ | 0..1 | dateTime | Date last changed | ||||
| publisher | Σ | 1..1 | string | Name of the publisher (organization or individual) | ||||
| contact | SΣ | 0..* | ContactDetail | Contact details for the publisher | ||||
| description | Σ | 1..1 | markdown | Natural language description of the measure | ||||
| useContext | SΣ | 0..* | UsageContext | The context that the content is intended to support | ||||
| jurisdiction | SΣ | 0..* | CodeableConcept | Intended jurisdiction for measure (if applicable) Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use. | ||||
| purpose | 0..1 | markdown | Why this measure is defined | |||||
| usage | 0..1 | string | Describes the clinical usage of the measure | |||||
| copyright | 0..1 | markdown | Use and/or publishing restrictions | |||||
| approvalDate | 0..1 | date | When the measure was approved by publisher | |||||
| lastReviewDate | 0..1 | date | When the measure was last reviewed | |||||
| effectivePeriod | Σ | 0..1 | Period | When the measure is expected to be used | ||||
| topic | 0..* | CodeableConcept | The category of the measure, such as Education, Treatment, Assessment, etc. Binding: DefinitionTopic (example): High-level categorization of the definition, used for searching, sorting, and filtering. | |||||
| author | 0..* | ContactDetail | Who authored the content | |||||
| editor | 0..* | ContactDetail | Who edited the content | |||||
| reviewer | 0..* | ContactDetail | Who reviewed the content | |||||
| endorser | 0..* | ContactDetail | Who endorsed the content | |||||
| relatedArtifact | 0..* | RelatedArtifact | Additional documentation, citations, etc. | |||||
| library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) | ||||
| disclaimer | Σ | 0..1 | markdown | Disclaimer for use of the measure or its referenced content | ||||
| scoring | Σ | 0..1 | CodeableConcept | proportion | ratio | continuous-variable | cohort Binding: MeasureScoring (extensible): The scoring type of the measure. | ||||
| compositeScoring | Σ | 0..1 | CodeableConcept | opportunity | all-or-nothing | linear | weighted Binding: CompositeMeasureScoring (extensible): The composite scoring method of the measure. | ||||
| type | SΣ | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) | ||||
| riskAdjustment | Σ | 0..1 | string | How risk adjustment is applied for this measure | ||||
| rateAggregation | Σ | 0..1 | string | How is rate aggregation performed for this measure | ||||
| rationale | Σ | 0..1 | markdown | Detailed description of why the measure exists | ||||
| clinicalRecommendationStatement | Σ | 0..1 | markdown | Summary of clinical guidelines | ||||
| improvementNotation | Σ | 0..1 | CodeableConcept | increase | decrease Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue. | ||||
| definition | Σ | 0..* | markdown | Defined terms used in the measure documentation | ||||
| guidance | Σ | 0..1 | markdown | Additional guidance for implementers | ||||
| group | S | 0..* | BackboneElement | Population criteria group | ||||
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the group | |||||
| description | 0..1 | string | Summary description | |||||
| population | S | 0..* | BackboneElement | Population criteria | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) | ||||
| description | 0..1 | string | The human readable description of this population criteria | |||||
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. | ||||
| stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the stratifier | |||||
| description | 0..1 | string | The human readable description of this stratifier | |||||
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. | ||||
| component | 0..* | BackboneElement | Stratifier criteria component for the measure | |||||
| id | 0..1 | string | Unique id for inter-element referencing | |||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the stratifier component | |||||
| description | 0..1 | string | The human readable description of this stratifier component | |||||
| criteria | 1..1 | Expression | Component of how the measure should be stratified | |||||
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| Slices for extension | 0..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) | ||||
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |||||
| description | 0..1 | string | The human readable description of this supplemental data | |||||
| criteria | 1..1 | Expression | Expression describing additional data to be reported | |||||
| Documentation for this format | ||||||||
| Path | Conformance | ValueSet | ||||
| Measure.meta.security | extensible | All Security Labels | ||||
| Measure.meta.tag | example | CommonTags | ||||
| Measure.language | preferred | CommonLanguages
| ||||
| Measure.status | required | PublicationStatus | ||||
| Measure.subject[x] | extensible | SubjectType | ||||
| Measure.jurisdiction | extensible | Jurisdiction ValueSet | ||||
| Measure.topic | example | DefinitionTopic | ||||
| Measure.scoring | extensible | MeasureScoring | ||||
| Measure.compositeScoring | extensible | CompositeMeasureScoring | ||||
| Measure.type | extensible | MeasureType | ||||
| Measure.improvementNotation | required | MeasureImprovementNotation | ||||
| Measure.group.population.code | extensible | MeasurePopulationType | ||||
| Measure.supplementalData.code | preferred | MeasureSupplementalData | ||||
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| dom-2 | error | Measure | If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty() | |
| dom-3 | error | Measure | If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() | |
| dom-4 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() | |
| dom-5 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty() | |
| dom-6 | best practice | Measure | A resource should have narrative for robust management : text.`div`.exists() | |
| ele-1 | error | **ALL** elements | All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count()) | |
| ext-1 | error | **ALL** extensions | Must have either extensions or value[x], not both : extension.exists() != value.exists() | |
| mea-0 | warning | Measure | Name should be usable as an identifier for the module by machine processing applications such as code generation : name.matches('[A-Z]([A-Za-z0-9_]){0,254}') | |
| mea-1 | error | Measure | Stratifier SHALL be either a single criteria or a set of criteria components : group.stratifier.all((code | description | criteria).exists() xor component.exists()) |
This structure is derived from Shareable Measure
Differential View
This structure is derived from Shareable Measure
| Name | Flags | Card. | Type | Description & Constraints |
|---|---|---|---|---|
| Measure | 1..1 | Shareable Measure | A quality measure definition | |
| meta | S | 1..1 | Meta | Metadata about the resource |
| profile | S | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to |
| comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment |
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem |
| library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) |
| type | S | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) |
| group | S | 0..* | BackboneElement | Population criteria group |
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group |
| population | S | 0..* | BackboneElement | Population criteria |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) |
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) |
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |
| Documentation for this format | ||||
| Path | Conformance | ValueSet |
| Measure.type | extensible | MeasureType |
| Measure.group.population.code | extensible | MeasurePopulationType |
| Measure.supplementalData.code | preferred | MeasureSupplementalData |
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() |
Key Elements View
| Name | Flags | Card. | Type | Description & Constraints |
|---|---|---|---|---|
| Measure | C | 1..1 | Shareable Measure | A quality measure definition |
| meta | SΣ | 1..1 | Meta | Metadata about the resource |
| profile | SΣ | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to |
| implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created |
| comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment |
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem |
| modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored |
| url | Σ | 1..1 | uri | Canonical identifier for this measure, represented as a URI (globally unique) |
| identifier | SΣ | 0..* | Identifier | Additional identifier for the measure |
| version | Σ | 1..1 | string | Business version of the measure |
| name | ΣC | 1..1 | string | Name for this measure (computer friendly) |
| title | SΣ | 0..1 | string | Name for this measure (human friendly) |
| status | ?!Σ | 1..1 | code | draft | active | retired | unknown Binding: PublicationStatus (required): The lifecycle status of an artifact. |
| experimental | Σ | 1..1 | boolean | For testing purposes, not real usage |
| date | SΣ | 0..1 | dateTime | Date last changed |
| publisher | Σ | 1..1 | string | Name of the publisher (organization or individual) |
| contact | SΣ | 0..* | ContactDetail | Contact details for the publisher |
| description | Σ | 1..1 | markdown | Natural language description of the measure |
| useContext | SΣ | 0..* | UsageContext | The context that the content is intended to support |
| jurisdiction | SΣ | 0..* | CodeableConcept | Intended jurisdiction for measure (if applicable) Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use. |
| library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) |
| type | SΣ | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) |
| group | S | 0..* | BackboneElement | Population criteria group |
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| population | S | 0..* | BackboneElement | Population criteria |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) |
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. |
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure |
| id | S | 1..1 | string | Unique id for inter-element referencing |
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized |
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) |
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |
| criteria | 1..1 | Expression | Expression describing additional data to be reported | |
| Documentation for this format | ||||
| Path | Conformance | ValueSet |
| Measure.status | required | PublicationStatus |
| Measure.jurisdiction | extensible | Jurisdiction ValueSet |
| Measure.type | extensible | MeasureType |
| Measure.group.population.code | extensible | MeasurePopulationType |
| Measure.supplementalData.code | preferred | MeasureSupplementalData |
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| dom-2 | error | Measure | If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty() | |
| dom-3 | error | Measure | If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() | |
| dom-4 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() | |
| dom-5 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty() | |
| dom-6 | best practice | Measure | A resource should have narrative for robust management : text.`div`.exists() | |
| ele-1 | error | **ALL** elements | All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count()) | |
| ext-1 | error | **ALL** extensions | Must have either extensions or value[x], not both : extension.exists() != value.exists() | |
| mea-0 | warning | Measure | Name should be usable as an identifier for the module by machine processing applications such as code generation : name.matches('[A-Z]([A-Za-z0-9_]){0,254}') | |
| mea-1 | error | Measure | Stratifier SHALL be either a single criteria or a set of criteria components : group.stratifier.all((code | description | criteria).exists() xor component.exists()) |
Snapshot View
| Name | Flags | Card. | Type | Description & Constraints | ||||
|---|---|---|---|---|---|---|---|---|
| Measure | C | 1..1 | Shareable Measure | A quality measure definition | ||||
| id | Σ | 0..1 | id | Logical id of this artifact | ||||
| meta | SΣ | 1..1 | Meta | Metadata about the resource | ||||
| id | 0..1 | string | Unique id for inter-element referencing | |||||
| extension | 0..* | Extension | Additional content defined by implementations Slice: Unordered, Open by value:url | |||||
| versionId | Σ | 0..1 | id | Version specific identifier | ||||
| lastUpdated | Σ | 0..1 | instant | When the resource version last changed | ||||
| source | Σ | 0..1 | uri | Identifies where the resource comes from | ||||
| profile | SΣ | 1..* | canonical(StructureDefinition) | Profiles this resource claims to conform to | ||||
| security | Σ | 0..* | Coding | Security Labels applied to this resource Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System. | ||||
| tag | Σ | 0..* | Coding | Tags applied to this resource Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones". | ||||
| implicitRules | ?!Σ | 0..1 | uri | A set of rules under which this content was created | ||||
| language | 0..1 | code | Language of the resource content Binding: CommonLanguages (preferred): A human language.
| |||||
| text | 0..1 | Narrative | Text summary of the resource, for human interpretation | |||||
| contained | 0..* | Resource | Contained, inline Resources | |||||
| Slices for extension | 0..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
| comment | S | 0..* | (Complex) | Additional documentation, review, or usage guidance URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment | ||||
| softwaresystem | S | 0..* | Reference(CQFM Device) | Extension URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem | ||||
| modifierExtension | ?! | 0..* | Extension | Extensions that cannot be ignored | ||||
| url | Σ | 1..1 | uri | Canonical identifier for this measure, represented as a URI (globally unique) | ||||
| identifier | SΣ | 0..* | Identifier | Additional identifier for the measure | ||||
| version | Σ | 1..1 | string | Business version of the measure | ||||
| name | ΣC | 1..1 | string | Name for this measure (computer friendly) | ||||
| title | SΣ | 0..1 | string | Name for this measure (human friendly) | ||||
| subtitle | 0..1 | string | Subordinate title of the measure | |||||
| status | ?!Σ | 1..1 | code | draft | active | retired | unknown Binding: PublicationStatus (required): The lifecycle status of an artifact. | ||||
| experimental | Σ | 1..1 | boolean | For testing purposes, not real usage | ||||
| subject[x] | 0..1 | E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device Binding: SubjectType (extensible): The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.). | ||||||
| subjectCodeableConcept | CodeableConcept | |||||||
| subjectReference | Reference(Group) | |||||||
| date | SΣ | 0..1 | dateTime | Date last changed | ||||
| publisher | Σ | 1..1 | string | Name of the publisher (organization or individual) | ||||
| contact | SΣ | 0..* | ContactDetail | Contact details for the publisher | ||||
| description | Σ | 1..1 | markdown | Natural language description of the measure | ||||
| useContext | SΣ | 0..* | UsageContext | The context that the content is intended to support | ||||
| jurisdiction | SΣ | 0..* | CodeableConcept | Intended jurisdiction for measure (if applicable) Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use. | ||||
| purpose | 0..1 | markdown | Why this measure is defined | |||||
| usage | 0..1 | string | Describes the clinical usage of the measure | |||||
| copyright | 0..1 | markdown | Use and/or publishing restrictions | |||||
| approvalDate | 0..1 | date | When the measure was approved by publisher | |||||
| lastReviewDate | 0..1 | date | When the measure was last reviewed | |||||
| effectivePeriod | Σ | 0..1 | Period | When the measure is expected to be used | ||||
| topic | 0..* | CodeableConcept | The category of the measure, such as Education, Treatment, Assessment, etc. Binding: DefinitionTopic (example): High-level categorization of the definition, used for searching, sorting, and filtering. | |||||
| author | 0..* | ContactDetail | Who authored the content | |||||
| editor | 0..* | ContactDetail | Who edited the content | |||||
| reviewer | 0..* | ContactDetail | Who reviewed the content | |||||
| endorser | 0..* | ContactDetail | Who endorsed the content | |||||
| relatedArtifact | 0..* | RelatedArtifact | Additional documentation, citations, etc. | |||||
| library | SC | 0..1 | canonical(CQFM Library) | CQFMMeasures are not required to use a Library, but if they do, it SHALL be a CQFMLibrary. cqm-2: Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) | ||||
| disclaimer | Σ | 0..1 | markdown | Disclaimer for use of the measure or its referenced content | ||||
| scoring | Σ | 0..1 | CodeableConcept | proportion | ratio | continuous-variable | cohort Binding: MeasureScoring (extensible): The scoring type of the measure. | ||||
| compositeScoring | Σ | 0..1 | CodeableConcept | opportunity | all-or-nothing | linear | weighted Binding: CompositeMeasureScoring (extensible): The composite scoring method of the measure. | ||||
| type | SΣ | 0..* | CodeableConcept | process | outcome | structure | patient-reported-outcome | composite Binding: MeasureType (extensible) | ||||
| riskAdjustment | Σ | 0..1 | string | How risk adjustment is applied for this measure | ||||
| rateAggregation | Σ | 0..1 | string | How is rate aggregation performed for this measure | ||||
| rationale | Σ | 0..1 | markdown | Detailed description of why the measure exists | ||||
| clinicalRecommendationStatement | Σ | 0..1 | markdown | Summary of clinical guidelines | ||||
| improvementNotation | Σ | 0..1 | CodeableConcept | increase | decrease Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue. | ||||
| definition | Σ | 0..* | markdown | Defined terms used in the measure documentation | ||||
| guidance | Σ | 0..1 | markdown | Additional guidance for implementers | ||||
| group | S | 0..* | BackboneElement | Population criteria group | ||||
| id | SC | 0..1 | string | Unique id for inter-element referencing cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the group | |||||
| description | 0..1 | string | Summary description | |||||
| population | S | 0..* | BackboneElement | Population criteria | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | S | 1..1 | CodeableConcept | initial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation Binding: MeasurePopulationType (extensible) | ||||
| description | 0..1 | string | The human readable description of this population criteria | |||||
| criteria | SC | 1..1 | Expression | The criteria that defines this population. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. | ||||
| stratifier | S | 0..* | BackboneElement | Stratifier criteria for the measure | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the stratifier | |||||
| description | 0..1 | string | The human readable description of this stratifier | |||||
| criteria | SC | 1..1 | Expression | How the measure should be stratified. The alternativeExpression extension may be used to provide alternative formulations of the expression cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. | ||||
| component | 0..* | BackboneElement | Stratifier criteria component for the measure | |||||
| id | 0..1 | string | Unique id for inter-element referencing | |||||
| extension | 0..* | Extension | Additional content defined by implementations | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | 0..1 | CodeableConcept | Meaning of the stratifier component | |||||
| description | 0..1 | string | The human readable description of this stratifier component | |||||
| criteria | 1..1 | Expression | Component of how the measure should be stratified | |||||
| supplementalData | S | 0..* | BackboneElement | What other data should be reported with the measure | ||||
| id | S | 1..1 | string | Unique id for inter-element referencing | ||||
| Slices for extension | 0..* | Extension | Extension Slice: Unordered, Open by value:url | |||||
| includeInReportType | 0..* | code | The type of report the element should be included in URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-includeInReportType Binding: MeasureReportType (required): The type of report the element should be included in | |||||
| modifierExtension | ?!Σ | 0..* | Extension | Extensions that cannot be ignored even if unrecognized | ||||
| code | S | 0..1 | CodeableConcept | Meaning of the supplemental data Binding: MeasureSupplementalData (preferred) | ||||
| usage | 0..* | CodeableConcept | supplemental-data | risk-adjustment-factor Binding: MeasureDataUsage (preferred) | |||||
| description | 0..1 | string | The human readable description of this supplemental data | |||||
| criteria | 1..1 | Expression | Expression describing additional data to be reported | |||||
| Documentation for this format | ||||||||
| Path | Conformance | ValueSet | ||||
| Measure.meta.security | extensible | All Security Labels | ||||
| Measure.meta.tag | example | CommonTags | ||||
| Measure.language | preferred | CommonLanguages
| ||||
| Measure.status | required | PublicationStatus | ||||
| Measure.subject[x] | extensible | SubjectType | ||||
| Measure.jurisdiction | extensible | Jurisdiction ValueSet | ||||
| Measure.topic | example | DefinitionTopic | ||||
| Measure.scoring | extensible | MeasureScoring | ||||
| Measure.compositeScoring | extensible | CompositeMeasureScoring | ||||
| Measure.type | extensible | MeasureType | ||||
| Measure.improvementNotation | required | MeasureImprovementNotation | ||||
| Measure.group.population.code | extensible | MeasurePopulationType | ||||
| Measure.supplementalData.code | preferred | MeasureSupplementalData | ||||
| Measure.supplementalData.usage | preferred | MeasureDataUsage |
| Id | Grade | Path(s) | Details | Requirements |
| cqm-2 | warning | Measure.library | Measures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure) : exists() | |
| cqm-3 | warning | Measure.group.id | Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group : startsWith('group-') | |
| cqm-4 | warning | Measure.group.population.criteria | Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| cqm-5 | warning | Measure.group.stratifier.criteria | Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace. : expression.contains('.').not() | |
| dom-2 | error | Measure | If the resource is contained in another resource, it SHALL NOT contain nested Resources : contained.contained.empty() | |
| dom-3 | error | Measure | If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource : contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() | |
| dom-4 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated : contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() | |
| dom-5 | error | Measure | If a resource is contained in another resource, it SHALL NOT have a security label : contained.meta.security.empty() | |
| dom-6 | best practice | Measure | A resource should have narrative for robust management : text.`div`.exists() | |
| ele-1 | error | **ALL** elements | All FHIR elements must have a @value or children : hasValue() or (children().count() > id.count()) | |
| ext-1 | error | **ALL** extensions | Must have either extensions or value[x], not both : extension.exists() != value.exists() | |
| mea-0 | warning | Measure | Name should be usable as an identifier for the module by machine processing applications such as code generation : name.matches('[A-Z]([A-Za-z0-9_]){0,254}') | |
| mea-1 | error | Measure | Stratifier SHALL be either a single criteria or a set of criteria components : group.stratifier.all((code | description | criteria).exists() xor component.exists()) |
This structure is derived from Shareable Measure
Other representations of profile: CSV, Excel, Schematron
IG © 2019+ HL7 International / Clinical Quality Information. Package hl7.fhir.us.cqfmeasures#5.0.0-ballot based on FHIR 4.0.1. Generated 2023-12-15
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change