US Core Implementation Guide
5.0.1 - STU5 Release US

This page is part of the US Core (v5.0.1: STU5) based on FHIR R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions

Resource Profile: US Core Observation Survey Profile

Official URL: http://hl7.org/fhir/us/core/StructureDefinition/us-core-observation-survey Version: 5.0.1
Active as of 2022-04-20 Computable Name: USCoreObservationSurveyProfile

Copyright/Legal: Used by permission of HL7 International, all rights reserved Creative Commons License

To promote interoperability and adoption through common implementation, the US Core Observation Survey Profile sets minimum expectations for the Observation Resource to record, search, and fetch retrieve observations that represent the questions and responses to form/survey and assessment tools. It can be used to represent individual responses, panels of multi-question surveys, and multi-select responses to “check all that apply” questions. It identifies which core elements, extensions, vocabularies and value sets SHALL be present in the resource when using this profile. It provides the floor for standards development for specific uses cases.

Example Usage Scenarios:

The following are example usage scenarios for this Profile:

  • Query for survey screening results for a patient.
  • Record or update screening results results belonging to a Patient

Mandatory and Must Support Data Elements

The following data-elements must always be present (Mandatory definition) or must be supported if the data is present in the sending system (Must Support definition). They are presented below in a simple human-readable explanation. Profile specific guidance and examples are provided as well. The Formal Profile Definition below provides the formal summary, definitions, and terminology requirements.

  1. a status
  2. a category code of “survey”
  3. a LOINC code, if available, which tells you the survey question
  4. a patient

Each Observation must support:

  1. a time indicating when survey was taken
  2. the answer or a reason why the data is absent*
    • if the result value is a numeric quantity and coded quantity units are used, UCUM is required.
  3. who answered the questions
  4. related questionnaire responses or observations that this observation is made from
  5. reference to observations that make up this observation**

* ** see guidance below

Profile specific implementation guidance:

  • **For responses to individual survey questions, the question is represented in Observation.code, and the answer in Observation.value.
  • **For responses to multi-select or “check all that apply” questions, each response is represented as individual US Core Survey Observations. For each response, the question is represented in Observation.code, and the answer in Observation.value.
  • **For multi-question surveys and assessments represented in Observation.code, the Observation.value element should be empty, and the individual survey questions represented as distinct US Core Survey Observations and referenced using Observation.hasMember.
  • See the SDOH guidance page for how this profile along with other Observation Profiles or alternatively QuestionnaireResponse to is used represent SDOH assessments.
  • Individual clinical assessments made by an individual about a patient’s social history which array_to_sentence_string not derived from an assessment tool or survey should use the US Core Observation Social History Profile instead.
  • The Observation.category element provides an efficient way of restricting search on observations to “survey” observations. Example searches are shown in the Quick Start section below. However, clients need to understand that data categorization is somewhat subjective. The categorization applied by the source may not align with the client’s expectations. Clients may find it more useful to use queries based on a specific code or set of codes or to perform additional client side filtering of query results.
  • *An Observation without a value, SHALL include a reason why the data is absent unless there are 1) component observations, or 2) reporting panel observations using Observation.hasMember.
    • For further guidance see the Observation Grouping section in FHIR Specification.
    • Systems that never provide an observation without a value are not required to support Observation.dataAbsentReason.
  • *An Observation.component without a value, SHALL include a reason why the data is absent.
    • Systems that never provide a component observation without a component value are not required to support Observation.component.dataAbsentReason.

Usage:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from Observation

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationSurvey Observation
us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present
us-core-3: SHALL use UCUM for coded quantity units.
... status S1..1coderegistered | preliminary | final | amended +
... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by pattern:$this
.... category:survey S1..1CodeableConceptClassification of type of observation
Required Pattern: At least the following
..... coding1..*CodingCode defined by a terminology system
Fixed Value: (complex)
...... system1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code1..1codeSymbol in syntax defined by the system
Fixed Value: survey
... code S1..1CodeableConceptType of observation (code / type)
Binding: US Core Survey Codes (preferred)
... subject S1..1Reference(US Core Patient Profile)Who and/or what the observation is about
... effective[x] SI0..1Clinically relevant time/time-period for observation
us-core-1: Datetime must be at least to day.
.... effectiveDateTimedateTime S
.... effectivePeriodPeriod
.... effectiveTimingTiming
.... effectiveInstantinstant
... performer S0..*Reference(US Core Practitioner Profile S | US Core Organization Profile | US Core Patient Profile | PractitionerRole | US Core CareTeam Profile | US Core RelatedPerson Profile)Who is responsible for the observation
... value[x] SI0..1Actual result
.... valueQuantityQuantity S
.... valueCodeableConceptCodeableConcept S
.... valueStringstring S
.... valueBooleanboolean
.... valueIntegerinteger
.... valueRangeRange
.... valueRatioRatio
.... valueSampledDataSampledData
.... valueTimetime
.... valueDateTimedateTime
.... valuePeriodPeriod
... dataAbsentReason SI0..1CodeableConceptWhy the result is missing
... hasMember S0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile | MolecularSequence)Reference to panel or multi-select responses
... derivedFrom S0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile S | US Core DocumentReference Profile | ImagingStudy | Media | MolecularSequence)Related Observations or QuestionnaireResponses that the observation is made from

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationSurvey Observation
us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present
us-core-3: SHALL use UCUM for coded quantity units.
... id Σ0..1stringLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionAdditional content defined by implementations
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ0..*Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)Fulfills plan, proposal or order
... partOf Σ0..*Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)Part of referenced event
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required): Codes providing the status of an observation.

... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


.... category:survey S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.



Required Pattern: At least the following
..... id0..1stringUnique id for inter-element referencing
..... extension0..*ExtensionAdditional content defined by implementations
..... coding1..*CodingCode defined by a terminology system
Fixed Value: (complex)
...... id0..1stringUnique id for inter-element referencing
...... extension0..*ExtensionAdditional content defined by implementations
...... system1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version0..1stringVersion of the system - if relevant
...... code1..1codeSymbol in syntax defined by the system
Fixed Value: survey
...... display0..1stringRepresentation defined by the system
...... userSelected0..1booleanIf this coding was chosen directly by the user
..... text0..1stringPlain text representation of the concept
... code SΣ1..1CodeableConceptType of observation (code / type)
Binding: US Core Survey Codes (preferred)
... subject SΣ1..1Reference(US Core Patient Profile)Who and/or what the observation is about
... focus Σ0..*Reference(Resource)What the observation is about, when it is not about the subject of record
... encounter Σ0..1Reference(Encounter)Healthcare event during which this observation is made
... effective[x] SΣI0..1Clinically relevant time/time-period for observation
us-core-1: Datetime must be at least to day.
.... effectiveDateTimedateTime S
.... effectivePeriodPeriod
.... effectiveTimingTiming
.... effectiveInstantinstant
... issued Σ0..1instantDate/Time this version was made available
... performer SΣ0..*Reference(US Core Practitioner Profile S | US Core Organization Profile | US Core Patient Profile | PractitionerRole | US Core CareTeam Profile | US Core RelatedPerson Profile)Who is responsible for the observation
... value[x] SΣI0..1Actual result
.... valueQuantityQuantity S
.... valueCodeableConceptCodeableConcept S
.... valueStringstring S
.... valueBooleanboolean
.... valueIntegerinteger
.... valueRangeRange
.... valueRatioRatio
.... valueSampledDataSampledData
.... valueTimetime
.... valueDateTimedateTime
.... valuePeriodPeriod
... dataAbsentReason SI0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


... note 0..*AnnotationComments about the observation
... bodySite 0..1CodeableConceptObserved body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.

... method 0..1CodeableConceptHow it was done
Binding: ObservationMethods (example): Methods for simple observations.

... specimen 0..1Reference(Specimen)Specimen used for this observation
... device 0..1Reference(Device | DeviceMetric)(Measurement) Device
... referenceRange I0..*BackboneElementProvides guide for interpretation
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... low I0..1SimpleQuantityLow Range, if relevant
.... high I0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

.... appliesTo 0..*CodeableConceptReference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... hasMember SΣ0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile | MolecularSequence)Reference to panel or multi-select responses
... derivedFrom SΣ0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile S | US Core DocumentReference Profile | ImagingStudy | Media | MolecularSequence)Related Observations or QuestionnaireResponses that the observation is made from
... component Σ0..*BackboneElementComponent results
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code Σ1..1CodeableConceptType of component observation (code / type)
Binding: LOINCCodes (example): Codes identifying names of simple observations.

.... value[x] Σ0..1Actual component result
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason I0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

.... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..*See referenceRange (Observation)Provides guide for interpretation of component result

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationSurvey Observation
us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present
us-core-3: SHALL use UCUM for coded quantity units.
... status ?!Σ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required): Codes providing the status of an observation.

... Slices for category 1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


.... category:survey 1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.



Required Pattern: At least the following
..... coding1..*CodingCode defined by a terminology system
Fixed Value: (complex)
...... system1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code1..1codeSymbol in syntax defined by the system
Fixed Value: survey
... code Σ1..1CodeableConceptType of observation (code / type)
Binding: US Core Survey Codes (preferred)
... subject Σ1..1Reference(US Core Patient Profile)Who and/or what the observation is about
... effective[x] ΣI0..1Clinically relevant time/time-period for observation
us-core-1: Datetime must be at least to day.
.... effectiveDateTimedateTime
... performer Σ0..*Reference(US Core Practitioner Profile)Who is responsible for the observation
... value[x] ΣI0..1Actual result
.... valueQuantityQuantity
.... valueCodeableConceptCodeableConcept
.... valueStringstring
... dataAbsentReason I0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... hasMember Σ0..*Reference(US Core Observation Survey Profile)Reference to panel or multi-select responses
... derivedFrom Σ0..*Reference(US Core Observation Survey Profile | US Core QuestionnaireResponse Profile)Related Observations or QuestionnaireResponses that the observation is made from

doco Documentation for this format

Differential View

This structure is derived from Observation

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationSurvey Observation
us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present
us-core-3: SHALL use UCUM for coded quantity units.
... status S1..1coderegistered | preliminary | final | amended +
... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by pattern:$this
.... category:survey S1..1CodeableConceptClassification of type of observation
Required Pattern: At least the following
..... coding1..*CodingCode defined by a terminology system
Fixed Value: (complex)
...... system1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... code1..1codeSymbol in syntax defined by the system
Fixed Value: survey
... code S1..1CodeableConceptType of observation (code / type)
Binding: US Core Survey Codes (preferred)
... subject S1..1Reference(US Core Patient Profile)Who and/or what the observation is about
... effective[x] SI0..1Clinically relevant time/time-period for observation
us-core-1: Datetime must be at least to day.
.... effectiveDateTimedateTime S
.... effectivePeriodPeriod
.... effectiveTimingTiming
.... effectiveInstantinstant
... performer S0..*Reference(US Core Practitioner Profile S | US Core Organization Profile | US Core Patient Profile | PractitionerRole | US Core CareTeam Profile | US Core RelatedPerson Profile)Who is responsible for the observation
... value[x] SI0..1Actual result
.... valueQuantityQuantity S
.... valueCodeableConceptCodeableConcept S
.... valueStringstring S
.... valueBooleanboolean
.... valueIntegerinteger
.... valueRangeRange
.... valueRatioRatio
.... valueSampledDataSampledData
.... valueTimetime
.... valueDateTimedateTime
.... valuePeriodPeriod
... dataAbsentReason SI0..1CodeableConceptWhy the result is missing
... hasMember S0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile | MolecularSequence)Reference to panel or multi-select responses
... derivedFrom S0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile S | US Core DocumentReference Profile | ImagingStudy | Media | MolecularSequence)Related Observations or QuestionnaireResponses that the observation is made from

doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Observation I0..*ObservationSurvey Observation
us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present
us-core-3: SHALL use UCUM for coded quantity units.
... id Σ0..1stringLogical id of this artifact
... meta Σ0..1MetaMetadata about the resource
... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred): A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionAdditional content defined by implementations
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... identifier Σ0..*IdentifierBusiness Identifier for observation
... basedOn Σ0..*Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)Fulfills plan, proposal or order
... partOf Σ0..*Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)Part of referenced event
... status ?!SΣ1..1coderegistered | preliminary | final | amended +
Binding: ObservationStatus (required): Codes providing the status of an observation.

... Slices for category S1..*CodeableConceptClassification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.


.... category:survey S1..1CodeableConceptClassification of type of observation
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.



Required Pattern: At least the following
..... id0..1stringUnique id for inter-element referencing
..... extension0..*ExtensionAdditional content defined by implementations
..... coding1..*CodingCode defined by a terminology system
Fixed Value: (complex)
...... id0..1stringUnique id for inter-element referencing
...... extension0..*ExtensionAdditional content defined by implementations
...... system1..1uriIdentity of the terminology system
Fixed Value: http://terminology.hl7.org/CodeSystem/observation-category
...... version0..1stringVersion of the system - if relevant
...... code1..1codeSymbol in syntax defined by the system
Fixed Value: survey
...... display0..1stringRepresentation defined by the system
...... userSelected0..1booleanIf this coding was chosen directly by the user
..... text0..1stringPlain text representation of the concept
... code SΣ1..1CodeableConceptType of observation (code / type)
Binding: US Core Survey Codes (preferred)
... subject SΣ1..1Reference(US Core Patient Profile)Who and/or what the observation is about
... focus Σ0..*Reference(Resource)What the observation is about, when it is not about the subject of record
... encounter Σ0..1Reference(Encounter)Healthcare event during which this observation is made
... effective[x] SΣI0..1Clinically relevant time/time-period for observation
us-core-1: Datetime must be at least to day.
.... effectiveDateTimedateTime S
.... effectivePeriodPeriod
.... effectiveTimingTiming
.... effectiveInstantinstant
... issued Σ0..1instantDate/Time this version was made available
... performer SΣ0..*Reference(US Core Practitioner Profile S | US Core Organization Profile | US Core Patient Profile | PractitionerRole | US Core CareTeam Profile | US Core RelatedPerson Profile)Who is responsible for the observation
... value[x] SΣI0..1Actual result
.... valueQuantityQuantity S
.... valueCodeableConceptCodeableConcept S
.... valueStringstring S
.... valueBooleanboolean
.... valueIntegerinteger
.... valueRangeRange
.... valueRatioRatio
.... valueSampledDataSampledData
.... valueTimetime
.... valueDateTimedateTime
.... valuePeriodPeriod
... dataAbsentReason SI0..1CodeableConceptWhy the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


... note 0..*AnnotationComments about the observation
... bodySite 0..1CodeableConceptObserved body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.

... method 0..1CodeableConceptHow it was done
Binding: ObservationMethods (example): Methods for simple observations.

... specimen 0..1Reference(Specimen)Specimen used for this observation
... device 0..1Reference(Device | DeviceMetric)(Measurement) Device
... referenceRange I0..*BackboneElementProvides guide for interpretation
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... low I0..1SimpleQuantityLow Range, if relevant
.... high I0..1SimpleQuantityHigh Range, if relevant
.... type 0..1CodeableConceptReference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.

.... appliesTo 0..*CodeableConceptReference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.


.... age 0..1RangeApplicable age range, if relevant
.... text 0..1stringText based reference range in an observation
... hasMember SΣ0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile | MolecularSequence)Reference to panel or multi-select responses
... derivedFrom SΣ0..*Reference(US Core Observation Survey Profile S | US Core QuestionnaireResponse Profile S | US Core DocumentReference Profile | ImagingStudy | Media | MolecularSequence)Related Observations or QuestionnaireResponses that the observation is made from
... component Σ0..*BackboneElementComponent results
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code Σ1..1CodeableConceptType of component observation (code / type)
Binding: LOINCCodes (example): Codes identifying names of simple observations.

.... value[x] Σ0..1Actual component result
..... valueQuantityQuantity
..... valueCodeableConceptCodeableConcept
..... valueStringstring
..... valueBooleanboolean
..... valueIntegerinteger
..... valueRangeRange
..... valueRatioRatio
..... valueSampledDataSampledData
..... valueTimetime
..... valueDateTimedateTime
..... valuePeriodPeriod
.... dataAbsentReason I0..1CodeableConceptWhy the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.

.... interpretation 0..*CodeableConceptHigh, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.


.... referenceRange 0..*See referenceRange (Observation)Provides guide for interpretation of component result

doco Documentation for this format

 

Other representations of profile: CSV, Excel, Schematron

Terminology Bindings

PathConformanceValueSet / Code
Observation.languagepreferredCommonLanguages
Max Binding: AllLanguages
Observation.statusrequiredObservationStatus
Observation.categorypreferredObservationCategoryCodes
Observation.category:surveypreferredPattern: survey
Observation.codepreferredUSCoreSurveyCodes
Observation.dataAbsentReasonextensibleDataAbsentReason
Observation.interpretationextensibleObservationInterpretationCodes
Observation.bodySiteexampleSNOMEDCTBodyStructures
Observation.methodexampleObservationMethods
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
Observation.component.codeexampleLOINCCodes
Observation.component.dataAbsentReasonextensibleDataAbsentReason
Observation.component.interpretationextensibleObservationInterpretationCodes

Constraints

IdGradePathDetailsRequirements
us-core-2errorObservationIf there is no component or hasMember element then either a value[x] or a data absent reason must be present
: (component.empty() and hasMember.empty()) implies (dataAbsentReason.exists() or value.exists())
us-core-3errorObservationSHALL use UCUM for coded quantity units.
: valueQuantity.system.empty() or valueQuantity.system = 'http://unitsofmeasure.org'
us-core-1errorObservation.effective[x]Datetime must be at least to day.
: $this is DateTime implies $this.toString().length() >= 10

Notes:

Quick Start

Below is an overview of the required Server RESTful FHIR interactions for this profile - for example, search and read operations - when supporting the US Core interactions to access this profile’s information (Profile Support + Interaction Support). Note that systems that support only US Core Profiles (Profile Only Support) are not required to support these interactions. See the US Core Server CapabilityStatement for a complete list of supported RESTful interactions for this IG.

  • The syntax used to describe the interactions is described here.
  • See the General Requirements section for additional rules and expectations when a server requires status parameters.

  • See the General Guidance section for additional guidance on searching for multiple patients.

  • The syntax used to describe the interactions is described here.
  • See the General Guidance section for additional rules and expectations when a server requires status parameters.
  • See the General Guidance section for additional guidance on searching for multiple patients.

Mandatory Search Parameters:

The following search parameters and search parameter combinations SHALL be supported:

  1. SHALL support searching using the combination of the patient and category search parameters:

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|survey

    Example:

    1. GET [base]/Observation?patient=1134281&category=http://terminology.hl7.org/CodeSystem/observation-category|survey

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and a category code = survey (how to search by reference and how to search by token)

  2. SHALL support searching using the combination of the patient and code search parameters:
    • including optional support for OR search on code (e.g.code={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=1134281&code=http://loinc.org|9271-8
    2. GET [base]/Observation?patient=1134281&code=http://loinc.org|9271-8,http://loinc.org|32405-3,http://loinc.org|32403-8

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and observation code(s). SHOULD support search by multiple report codes. The Observation code parameter searches `Observation.code only. (how to search by reference and how to search by token)

  3. SHALL support searching using the combination of the patient and category and date search parameters:
    • including support for these date comparators: gt,lt,ge,le
    • including optional support for AND search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|survey&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]Observation?patient=555580&category=http://terminology.hl7.org/CodeSystem/observation-category|survey&date=ge2018-03-14T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and a category code = survey (how to search by reference and how to search by token and how to search by date)

Optional Search Parameters:

The following search parameter combinations SHOULD be supported:

  1. SHOULD support searching using the combination of the patient and category and status search parameters:
    • including support for OR search on status (e.g.status={system|}[code],{system|}[code],...)

    GET [base]/Observation?patient={Type/}[id]&category=http://terminology.hl7.org/CodeSystem/observation-category|survey&status={system|}[code]{,{system|}[code],...}

    Example:

    1. GET [base]/Observation?patient=1134281&category=http://terminology.hl7.org/CodeSystem/observation-category|survey&status=final

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and category = survey and status (how to search by reference and how to search by token)

  2. SHOULD support searching using the combination of the patient and code and date search parameters:
    • including optional support for OR search on code (e.g.code={system|}[code],{system|}[code],...)
    • including support for these date comparators: gt,lt,ge,le
    • including optional support for AND search on date (e.g.date=[date]&date=[date]]&...)

    GET [base]/Observation?patient={Type/}[id]&code={system|}[code]{,{system|}[code],...}&date={gt|lt|ge|le}[date]{&date={gt|lt|ge|le}[date]&...}

    Example:

    1. GET [base]Observation?patient=555580&code=http://loinc.org|9271-8&date=ge2019-01-01T00:00:00Z

    Implementation Notes: Fetches a bundle of all Observation resources for the specified patient and date and report code(s). SHOULD support search by multiple report codes. (how to search by reference and how to search by token and how to search by date)