This page is part of the CCDA: Consolidated CDA Release (v3.0.0: CCDA 3.0) generated with FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version. For a full list of available versions, see the Directory of published versions
Draft as of 2024-05-18 |
Definitions for the ProcedureActivityProcedure logical model.
Guidance on how to interpret the contents of this table can be found here
0. Procedure | |
Logical Container | ClinicalDocument (CDA Class) |
Validation | Instance of this type are validated by templateId |
XML Format | In the XML format, this property has the namespace urn:hl7-org:v3 . |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )active-high-ts-after-document: If the procedure is active and contains a high effectiveTime, this time SHALL be after the ClinicalDocument/effectiveTime ( (statusCode.code = 'active' and effectiveTime.high.value.exists()) implies effectiveTime.high.value > %resource.effectiveTime.value )should-targetSiteCode: SHOULD contain targetSiteCode ( targetSiteCode.exists() )should-performer: SHOULD contain performer ( performer.exists() )should-author: SHOULD contain author ( author.exists() ) |
2. Procedure.templateId | |
Control | 1..? |
Slicing | This element introduces a set of slices on Procedure.templateId . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
4. Procedure.templateId:procedure | |
Slice Name | procedure |
Control | 1..1 |
6. Procedure.templateId:procedure.root | |
Control | 1..? |
Pattern Value | 2.16.840.1.113883.10.20.22.4.14 |
8. Procedure.templateId:procedure.extension | |
Control | 1..? |
Pattern Value | 2024-05-01 |
10. Procedure.classCode | |
Comments | SHALL contain exactly one [1..1] @classCode="PROC" Procedure (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7652). |
12. Procedure.moodCode | |
Comments | SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7653). |
Fixed Value | EVN |
14. Procedure.id | |
Comments | SHALL contain at least one [1..*] id (CONF:4515-7655). |
Control | 1..? |
16. Procedure.code | |
Short | (USCDI) SDOH Interventions |
Comments | SHALL contain exactly one [1..1] code (CONF:4515-7656). |
Control | 1..? |
Binding | The codes SHOULD be taken from US Core Procedure Codes (preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code ) |
Invariants | should-otext-ref-value: SHOULD contain originalText/reference/@value (originalText.reference.value.exists() ) |
18. Procedure.code.originalText | |
Short | SHOULD reference the portion of narrative corresponding to this code |
20. Procedure.code.originalText.reference | |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
22. Procedure.text | |
Short | SHOULD reference the portion of section narrative text corresponding to this entry |
24. Procedure.text.reference | |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
26. Procedure.statusCode | |
Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-7661). |
Control | 1..? |
28. Procedure.statusCode.nullFlavor | |
Control | 0..0 |
30. Procedure.statusCode.code | |
Control | 1..? |
Binding | The codes SHALL be taken from ProcedureAct statusCode (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.22 ) |
32. Procedure.effectiveTime | |
Short | (USCDI) Performance Time |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS(US Realm Date and Time - Interval) |
Invariants | should-value: SHOULD contain value (value.exists() )ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime ( value.exists() implies value <= %resource.effectiveTime.value ) |
34. Procedure.effectiveTime.value | |
Short | Indicates historical procedure or an instance of a procedure where precision may be only a date or even a year. |
36. Procedure.effectiveTime.low | |
Short | Indicates when a procedure started |
Comments | MAY contain zero or one [0..1] low |
Invariants | ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime (value.exists() implies value <= %resource.effectiveTime.value ) |
38. Procedure.effectiveTime.high | |
Short | Indicates when a procedure ended. If the statusCode='active', this must be after the ClinicalDcument/effectiveTime |
Comments | MAY contain zero or one [0..1] high |
40. Procedure.priorityCode | |
Comments | MAY contain zero or one [0..1] priorityCode, which SHALL be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:4515-7668). |
Binding | The codes SHALL be taken from ActPriority (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.1.11.16866 ) |
42. Procedure.methodCode | |
Short | MethodCode **SHALL NOT** conflict with the method inherent in Procedure / code (CONF:4515-7890). |
Comments | MAY contain zero or one [0..1] methodCode (CONF:4515-7670). |
Control | 0..1 |
44. Procedure.targetSiteCode | |
Short | In the case of an implanted medical device, targetSiteCode is used to record the location of the device, in or on the patient's body. |
Comments | SHOULD contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-7683). |
Binding | The codes SHALL be taken from Body Site Value Set (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9 ) |
46. Procedure.specimen | |
Short | This specimen is for representing specimens obtained from a procedure (CONF:4515-16842). |
Comments | MAY contain zero or more [0..*] specimen (CONF:4515-7697). |
48. Procedure.specimen.specimenRole | |
Comments | The specimen, if present, SHALL contain exactly one [1..1] specimenRole (CONF:4515-7704). |
Invariants | should-id: SHOULD contain id (id.exists() ) |
50. Procedure.specimen.specimenRole.id | |
Short | If you want to indicate that the Procedure and the Results are referring to the same specimen, the Procedure/specimen/specimenRole/id **SHOULD** be set to equal an Organizer/specimen/specimenRole/id (CONF:4515-29744). |
Comments | This specimenRole SHOULD contain zero or more [0..*] id (CONF:4515-7716). |
52. Procedure.performer | |
Comments | SHOULD contain zero or more [0..*] performer (CONF:4515-7718) such that it |
54. Procedure.performer.assignedEntity | |
Comments | SHALL contain exactly one [1..1] assignedEntity (CONF:4515-7720). |
Invariants | should-assignedPerson: SHOULD contain assignedPerson (assignedPerson.exists() )should-representedOrganization: SHOULD contain representedOrganization ( representedOrganization.exists() ) |
56. Procedure.performer.assignedEntity.id | |
Comments | This assignedEntity SHALL contain at least one [1..*] id (CONF:4515-7722). |
58. Procedure.performer.assignedEntity.addr | |
Comments | This assignedEntity SHALL contain at least one [1..*] addr (CONF:4515-7731). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
60. Procedure.performer.assignedEntity.telecom | |
Comments | This assignedEntity SHALL contain at least one [1..*] telecom (CONF:4515-7732). |
Control | 1..? |
62. Procedure.performer.assignedEntity.assignedPerson | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] assignedPerson. |
64. Procedure.performer.assignedEntity.assignedPerson.name | |
Comments | This assignedPerson SHALL contain at least one [1..*] US Realm Person Name (PN.US.FIELDED). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/PN(US Realm Person Name (PN.US.FIELDED)) |
66. Procedure.performer.assignedEntity.representedOrganization | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] representedOrganization (CONF:4515-7733). |
Invariants | should-id: SHOULD contain id (id.exists() ) |
68. Procedure.performer.assignedEntity.representedOrganization.id | |
Comments | The representedOrganization, if present, SHOULD contain zero or more [0..*] id (CONF:4515-7734). |
70. Procedure.performer.assignedEntity.representedOrganization.name | |
Comments | The representedOrganization, if present, MAY contain zero or more [0..*] name (CONF:4515-7735). |
72. Procedure.performer.assignedEntity.representedOrganization.telecom | |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] telecom (CONF:4515-7737). |
Control | 1..? |
74. Procedure.performer.assignedEntity.representedOrganization.addr | |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] addr (CONF:4515-7736). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
76. Procedure.author | |
Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-32479). |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
78. Procedure.participant | |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7765) such that it |
Slicing | This element introduces a set of slices on Procedure.participant . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
80. Procedure.participant:productInstance | |
Slice Name | productInstance |
Short | participant |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7751) such that it |
Control | 0..* |
82. Procedure.participant:productInstance.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="DEV" Device (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7752). |
Fixed Value | DEV |
84. Procedure.participant:productInstance.participantRole | |
Comments | SHALL contain exactly one [1..1] Product Instance (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.37) (CONF:4515-15911). |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Product Instance) |
86. Procedure.participant:serviceDeliveryLocation | |
Slice Name | serviceDeliveryLocation |
Short | participant |
Control | 0..* |
88. Procedure.participant:serviceDeliveryLocation.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="LOC" Location (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:4515-7766). |
Fixed Value | LOC |
90. Procedure.participant:serviceDeliveryLocation.participantRole | |
Comments | SHALL contain exactly one [1..1] Service Delivery Location (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.32) (CONF:4515-15912). |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Service Delivery Location) |
92. Procedure.entryRelationship | |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32988) such that it |
Slicing | This element introduces a set of slices on Procedure.entryRelationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
94. Procedure.entryRelationship:encounter | |
Slice Name | encounter |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7768) such that it |
Control | 0..* |
96. Procedure.entryRelationship:encounter.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7769). |
Fixed Value | COMP |
98. Procedure.entryRelationship:encounter.inversionInd | |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-8009). |
Control | 1..? |
Fixed Value | true |
100. Procedure.entryRelationship:encounter.encounter | |
Comments | SHALL contain exactly one [1..1] encounter (CONF:4515-7770). |
Control | 1..? |
102. Procedure.entryRelationship:encounter.encounter.classCode | |
Comments | This encounter SHALL contain exactly one [1..1] @classCode="ENC" Encounter (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7771). |
104. Procedure.entryRelationship:encounter.encounter.moodCode | |
Comments | This encounter SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7772). |
Fixed Value | EVN |
106. Procedure.entryRelationship:encounter.encounter.id | |
Short | Set the encounter ID to the ID of an encounter in another section to signify they are the same encounter (CONF:4515-16843). |
Comments | This encounter SHALL contain exactly one [1..1] id (CONF:4515-7773). |
Control | 1..1 |
108. Procedure.entryRelationship:instruction | |
Slice Name | instruction |
Short | entryRelationship |
Comments | MAY contain zero or one [0..1] entryRelationship (CONF:4515-7775) such that it |
Control | 0..1 |
110. Procedure.entryRelationship:instruction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7776). |
Fixed Value | SUBJ |
112. Procedure.entryRelationship:instruction.inversionInd | |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-7777). |
Control | 1..? |
Fixed Value | true |
114. Procedure.entryRelationship:instruction.act | |
Comments | SHALL contain exactly one [1..1] Instruction (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:4515-31395). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Instruction) |
116. Procedure.entryRelationship:instruction.encounter | |
Control | 0..0 |
118. Procedure.entryRelationship:indication | |
Slice Name | indication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7779) such that it |
Control | 0..* |
120. Procedure.entryRelationship:indication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7780). |
Fixed Value | RSON |
122. Procedure.entryRelationship:indication.encounter | |
Control | 0..0 |
124. Procedure.entryRelationship:indication.observation | |
Comments | SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-15914). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication) |
126. Procedure.entryRelationship:medication | |
Slice Name | medication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7886) such that it |
Control | 0..* |
128. Procedure.entryRelationship:medication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7887). |
Fixed Value | COMP |
130. Procedure.entryRelationship:medication.encounter | |
Control | 0..0 |
132. Procedure.entryRelationship:medication.substanceAdministration | |
Comments | SHALL contain exactly one [1..1] Medication Activity (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.16:2014-06-09) (CONF:4515-15915). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration(Medication Activity) |
134. Procedure.entryRelationship:reaction | |
Slice Name | reaction |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32473) such that it |
Control | 0..* |
136. Procedure.entryRelationship:reaction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32474). |
Fixed Value | COMP |
138. Procedure.entryRelationship:reaction.encounter | |
Control | 0..0 |
140. Procedure.entryRelationship:reaction.observation | |
Comments | SHALL contain exactly one [1..1] Reaction Observation (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:4515-32475). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Reaction Observation) |
142. Procedure.entryRelationship:assessmentScaleObs | |
Slice Name | assessmentScaleObs |
Short | When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health intervention procedure, that Assessment scale **MAY** contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments. |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32985) such that it |
Control | 0..* |
144. Procedure.entryRelationship:assessmentScaleObs.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32987). |
Fixed Value | RSON |
146. Procedure.entryRelationship:assessmentScaleObs.encounter | |
Control | 0..0 |
148. Procedure.entryRelationship:assessmentScaleObs.observation | |
Comments | SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32986). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation) |
150. Procedure.entryRelationship:entryReference | |
Slice Name | entryReference |
Short | When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference **MAY** refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments. |
Control | 0..* |
152. Procedure.entryRelationship:entryReference.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32990). |
Fixed Value | RSON |
154. Procedure.entryRelationship:entryReference.act | |
Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32989). |
Control | 1..? |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
156. Procedure.entryRelationship:entryReference.encounter | |
Control | 0..0 |
Guidance on how to interpret the contents of this table can be found here
0. Procedure | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. Base definition for all types defined in FHIR type system. |
Short | Base for all types and resources |
Control | 10..1* |
Is Modifier | false |
Logical Container | ClinicalDocument (CDA Class) |
Validation | Instance of this type are validated by templateId |
XML Format | In the XML format, this property has the namespace urn:hl7-org:v3 . |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )active-high-ts-after-document: If the procedure is active and contains a high effectiveTime, this time SHALL be after the ClinicalDocument/effectiveTime ( (statusCode.code = 'active' and effectiveTime.high.value.exists()) implies effectiveTime.high.value > %resource.effectiveTime.value )should-targetSiteCode: SHOULD contain targetSiteCode ( targetSiteCode.exists() )should-performer: SHOULD contain performer ( performer.exists() )should-author: SHOULD contain author ( author.exists() ) |
2. Procedure.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
Slicing | This element introduces a set of slices on Procedure.templateId . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
4. Procedure.templateId:procedure | |
Slice Name | procedure |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
6. Procedure.templateId:procedure.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Pattern Value | 2.16.840.1.113883.10.20.22.4.14 |
8. Procedure.templateId:procedure.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
Pattern Value | 2024-05-01 |
10. Procedure.classCode | |
Comments | SHALL contain exactly one [1..1] @classCode="PROC" Procedure (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7652). |
Control | 1..1 |
Binding | The codes SHALL be taken from ActClassProcedure (required to http://terminology.hl7.org/ValueSet/v3-ActClassProcedure ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | PROC |
12. Procedure.moodCode | |
Comments | SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7653). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_DocumentProcedureMood (required to http://terminology.hl7.org/ValueSet/v3-xDocumentProcedureMood ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | EVN |
14. Procedure.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Logical id of this artifact |
Comments | SHALL contain at least one [1..*] id (CONF:4515-7655). Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 10..*1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IIid |
Is Modifier | false |
16. Procedure.code | |
Definition | Drawn from concept domain ActCode The specific procedure that is performed. Use text if the exact nature of the procedure cannot be coded (e.g. "Laparoscopic Appendectomy"). |
Short | (USCDI) SDOH InterventionsIdentification of the procedure |
Comments | SHALL contain exactly one [1..1] code (CONF:4515-7656). |
Control | 10..1 |
Binding | The codes SHOULD be taken from For example codes, see US Core Procedure Codeshttp://hl7.org/fhir/ValueSet/procedure-code (preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CDCodeableConcept |
Is Modifier | false |
Requirements | 0..1 to account for primarily narrative only resources. |
Alternate Names | type |
Invariants | should-otext-ref-value: SHOULD contain originalText/reference/@value (originalText.reference.value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Procedure.code.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Short | SHOULD reference the portion of narrative corresponding to this code |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Original Text |
20. Procedure.code.originalText.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
Label | Reference |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
22. Procedure.text | |
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. |
Short | SHOULD reference the portion of section narrative text corresponding to this entryText summary of the resource, for human interpretation |
Comments | Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. |
Control | 0..1 This element is affected by the following invariants: dom-6 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EDNarrative |
Is Modifier | false |
Alternate Names | narrative, html, xhtml, display |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. Procedure.text.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
Label | Reference |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
26. Procedure.statusCode | |
Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-7661). |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus (required to http://terminology.hl7.org/ValueSet/v3-ActStatus ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
28. Procedure.statusCode.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..0 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
30. Procedure.statusCode.code | |
Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
Control | 1..1 |
Binding | The codes SHALL be taken from ProcedureAct statusCode (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.22 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code |
32. Procedure.statusCode.codeSystem | |
Definition | Specifies the code system that defines the code. |
Control | 0..0 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System |
34. Procedure.statusCode.codeSystemName | |
Definition | The common name of the coding system. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Name |
36. Procedure.statusCode.codeSystemVersion | |
Definition | If applicable, a version descriptor defined specifically for the given code system. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Version |
38. Procedure.statusCode.displayName | |
Definition | A name or title for the code, under which the sending system shows the code value to its users. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Display Name |
40. Procedure.statusCode.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Original Text |
42. Procedure.statusCode.qualifier | |
Definition | Specifies additional codes that increase the specificity of the the primary code. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
Label | Qualifier |
44. Procedure.statusCode.translation | |
Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
XML Format | The type of this property is determined using the " xsi:type attribute. |
Label | Translation |
46. Procedure.effectiveTime | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Short | (USCDI) Performance Time |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS(US Realm Date and Time - Interval) |
Is Modifier | false |
Invariants | ivl-ts-center: Center cannot co-exist with low or high (center.empty() or (low.empty() and high.empty()) )ivl-value-shall: If a time interval contains @value, then it shall be precise to at least the day. ( value.exists() implies value.toString().length() >= 10 )ivl-value-should: If a time interval contains @value, then it SHOULD contain a time component. ( value.exists() implies value.toString().length() > 10 )should-value: SHOULD contain value ( value.exists() )ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime ( value.exists() implies value <= %resource.effectiveTime.value ) |
48. Procedure.effectiveTime.value | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Short | Indicates historical procedure or an instance of a procedure where precision may be only a date or even a year. |
Control | 0..1 |
Type | dateTime(ts: Point in Time) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Date Format | YYYYMMDDHHMMSS.UUUU[+|-ZZzz] |
XML Format | In the XML format, this property is represented as an attribute. |
50. Procedure.effectiveTime.low | |
Definition | This is the low limit of the interval. |
Short | Indicates when a procedure started |
Comments | MAY contain zero or one [0..1] low |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS |
Label | Low Boundary |
Invariants | ts-shall-day: **SHALL** be precise to at least the day (nullFlavor.exists() or value.toString().length() >= 10 )ts-should-minute: **SHOULD** be precise to at least the minute ( nullFlavor.exists() or value.toString().length() > 10 )ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime ( value.exists() implies value <= %resource.effectiveTime.value ) |
52. Procedure.effectiveTime.high | |
Definition | This is the high limit of the interval. |
Short | Indicates when a procedure ended. If the statusCode='active', this must be after the ClinicalDcument/effectiveTime |
Comments | MAY contain zero or one [0..1] high |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS |
Label | High Boundary |
Invariants | ts-shall-day: **SHALL** be precise to at least the day (nullFlavor.exists() or value.toString().length() >= 10 )ts-should-minute: **SHOULD** be precise to at least the minute ( nullFlavor.exists() or value.toString().length() > 10 ) |
54. Procedure.priorityCode | |
Comments | MAY contain zero or one [0..1] priorityCode, which SHALL be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:4515-7668). |
Control | 0..1 |
Binding | The codes SHALL be taken from ActPriority (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.1.11.16866 ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
56. Procedure.methodCode | |
Definition | Drawn from concept domain ProcedureMethod |
Short | MethodCode **SHALL NOT** conflict with the method inherent in Procedure / code (CONF:4515-7890). |
Comments | MAY contain zero or one [0..1] methodCode (CONF:4515-7670). |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
58. Procedure.targetSiteCode | |
Definition | Drawn from concept domain ActSite |
Short | In the case of an implanted medical device, targetSiteCode is used to record the location of the device, in or on the patient's body. |
Comments | SHOULD contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-7683). |
Control | 0..* |
Binding | The codes SHALL be taken from Body Site Value Set (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9 ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
60. Procedure.specimen | |
Short | This specimen is for representing specimens obtained from a procedure (CONF:4515-16842). |
Comments | MAY contain zero or more [0..*] specimen (CONF:4515-7697). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
62. Procedure.specimen.specimenRole | |
Comments | The specimen, if present, SHALL contain exactly one [1..1] specimenRole (CONF:4515-7704). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SpecimenRole |
Invariants | should-id: SHOULD contain id (id.exists() ) |
64. Procedure.specimen.specimenRole.id | |
Short | If you want to indicate that the Procedure and the Results are referring to the same specimen, the Procedure/specimen/specimenRole/id **SHOULD** be set to equal an Organizer/specimen/specimenRole/id (CONF:4515-29744). |
Comments | This specimenRole SHOULD contain zero or more [0..*] id (CONF:4515-7716). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
66. Procedure.performer | |
Definition | Indicates who or what performed the procedure and how they were involved. |
Short | Who performed the procedure and what they did |
Comments | SHOULD contain zero or more [0..*] performer (CONF:4515-7718) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2BackboneElement |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) prc-1: Procedure.performer.onBehalfOf can only be populated when performer.actor isn't Practitioner or PractitionerRole (onBehalfOf.exists() and actor.resolve().exists() implies actor.resolve().where($this is Practitioner or $this is PractitionerRole).empty()) |
68. Procedure.performer.assignedEntity | |
Comments | SHALL contain exactly one [1..1] assignedEntity (CONF:4515-7720). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AssignedEntity |
Invariants | should-assignedPerson: SHOULD contain assignedPerson (assignedPerson.exists() )should-representedOrganization: SHOULD contain representedOrganization ( representedOrganization.exists() ) |
70. Procedure.performer.assignedEntity.id | |
Comments | This assignedEntity SHALL contain at least one [1..*] id (CONF:4515-7722). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
72. Procedure.performer.assignedEntity.addr | |
Definition | Mailing and home or office addresses. A sequence of address parts, such as street or post office Box, city, postal code, country, etc. |
Short | Base for all types and resources |
Comments | This assignedEntity SHALL contain at least one [1..*] addr (CONF:4515-7731). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
Is Modifier | false |
Invariants | shall-city: SHALL contain exactly one [1..1] city (CONF:81-7292). (nullFlavor.exists() or item.city.count() = 1 )shall-streetAddressLine: SHALL contain at least one and not more than 4 streetAddressLine (CONF:81-7291). ( nullFlavor.exists() or (item.streetAddressLine.count() >= 1 and item.streetAddressLine.count() <= 4) )should-use: SHOULD contain @use ( nullFlavor.exists() or use.exists() )should-country: SHOULD contain country ( nullFlavor.exists() or item.country.exists() )81-7296: **SHALL NOT** have mixed content except for white space (CONF:81-7296) ( item.xmlText.empty() )81-10024: If the country is US, the state element is required and SHALL be selected from ValueSet StateValueSet but SHOULD have @nullFlavor if the state is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the state MAY be present but MAY be bound to different vocabularies (CONF:81-10024). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.state.exists(nullFlavor.exists() or xmlText.memberOf('http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state')) )81-10025: If the country is US, the postalCode element is required but SHOULD have @nullFlavor if the postalCode is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the postalCode MAY be present but MAY be bound to different vocabularies (CONF:81-10025). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.postalCode.exists(nullFlavor.exists() or xmlText.matches('[0-9]{5}(-[0-9]{4})?')) )shall-max-ad-parts: SHALL have at most one of each: state, city, postalCode, and country ( (item.state.empty() or item.state.count() = 1) and (item.city.empty() or item.city.count() = 1) and (item.postalCode.empty() or item.postalCode.count() = 1) and (item.country.empty() or item.country.count() = 1) ) |
74. Procedure.performer.assignedEntity.telecom | |
Comments | This assignedEntity SHALL contain at least one [1..*] telecom (CONF:4515-7732). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
76. Procedure.performer.assignedEntity.assignedPerson | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] assignedPerson. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Person |
78. Procedure.performer.assignedEntity.assignedPerson.name | |
Definition | A name for a person. A sequence of name parts, such as given name or family name, prefix, suffix, etc. Examples for person name values are "Jim Bob Walton, Jr.", "Adam Everyman", etc. A person name may be as simple as a character string or may consist of several person name parts, such as, "Jim", "Bob", "Walton", and "Jr.". PN differs from EN because the qualifier type cannot include LS (Legal Status). A name associated with the person. |
Short | Base for all types and resourcesA name associated with the person |
Comments | This assignedPerson SHALL contain at least one [1..*] US Realm Person Name (PN.US.FIELDED). Person may have multiple names with different uses or applicable periods. |
Control | 10..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/PNHumanName(US Realm Person Name (PN.US.FIELDED)) |
Is Modifier | false |
Requirements | Need to be able to track the person by multiple names. Examples are your official name and a partner name. |
Invariants | pn-no-ls: No PN name part may have a qualifier of LS. ((item.delimiter | item.family | item.given | item.prefix | item.suffix).where(qualifier.where($this = 'LS').exists()).empty() )81-9371: The content of name **SHALL** be either a conformant Patient Name (PTN.US.FIELDED), or a string (CONF:81-9371). ( conformsTo('http://hl7.org/cda/us/ccda/StructureDefinition/USRealmPatientNamePTNUSFIELDED') or item.xmlText.exists() )81-9372: The string **SHALL NOT** contain name parts (CONF:81-9372). ( item.xmlText.exists() implies (item.delimiter | item.family | item.given | item.prefix | item.suffix).empty() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
80. Procedure.performer.assignedEntity.representedOrganization | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] representedOrganization (CONF:4515-7733). |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organization |
Invariants | should-id: SHOULD contain id (id.exists() ) |
82. Procedure.performer.assignedEntity.representedOrganization.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Logical id of this artifact |
Comments | The representedOrganization, if present, SHOULD contain zero or more [0..*] id (CONF:4515-7734). Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 0..*1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IIid |
Is Modifier | false |
84. Procedure.performer.assignedEntity.representedOrganization.name | |
Definition | A name associated with the organization. |
Short | Name used for the organization |
Comments | The representedOrganization, if present, MAY contain zero or more [0..*] name (CONF:4515-7735). If the name of an organization changes, consider putting the old name in the alias column so that it can still be located through searches. |
Control | 0..*1 This element is affected by the following invariants: org-1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ONstring |
Is Modifier | false |
Requirements | Need to use the name as the label of the organization. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
86. Procedure.performer.assignedEntity.representedOrganization.telecom | |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] telecom (CONF:4515-7737). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
88. Procedure.performer.assignedEntity.representedOrganization.addr | |
Definition | Mailing and home or office addresses. A sequence of address parts, such as street or post office Box, city, postal code, country, etc. |
Short | Base for all types and resources |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] addr (CONF:4515-7736). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
Is Modifier | false |
Invariants | shall-city: SHALL contain exactly one [1..1] city (CONF:81-7292). (nullFlavor.exists() or item.city.count() = 1 )shall-streetAddressLine: SHALL contain at least one and not more than 4 streetAddressLine (CONF:81-7291). ( nullFlavor.exists() or (item.streetAddressLine.count() >= 1 and item.streetAddressLine.count() <= 4) )should-use: SHOULD contain @use ( nullFlavor.exists() or use.exists() )should-country: SHOULD contain country ( nullFlavor.exists() or item.country.exists() )81-7296: **SHALL NOT** have mixed content except for white space (CONF:81-7296) ( item.xmlText.empty() )81-10024: If the country is US, the state element is required and SHALL be selected from ValueSet StateValueSet but SHOULD have @nullFlavor if the state is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the state MAY be present but MAY be bound to different vocabularies (CONF:81-10024). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.state.exists(nullFlavor.exists() or xmlText.memberOf('http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state')) )81-10025: If the country is US, the postalCode element is required but SHOULD have @nullFlavor if the postalCode is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the postalCode MAY be present but MAY be bound to different vocabularies (CONF:81-10025). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.postalCode.exists(nullFlavor.exists() or xmlText.matches('[0-9]{5}(-[0-9]{4})?')) )shall-max-ad-parts: SHALL have at most one of each: state, city, postalCode, and country ( (item.state.empty() or item.state.count() = 1) and (item.city.empty() or item.city.count() = 1) and (item.postalCode.empty() or item.postalCode.count() = 1) and (item.country.empty() or item.country.count() = 1) ) |
90. Procedure.author | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-32479). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
Is Modifier | false |
92. Procedure.participant | |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7765) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
Slicing | This element introduces a set of slices on Procedure.participant . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
94. Procedure.participant:productInstance | |
Slice Name | productInstance |
Short | participant |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7751) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
96. Procedure.participant:productInstance.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="DEV" Device (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7752). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAParticipationType (required to http://hl7.org/cda/stds/core/ValueSet/CDAParticipationType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | DEV |
98. Procedure.participant:productInstance.participantRole | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Product Instance (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.37) (CONF:4515-15911). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Product Instance) |
Is Modifier | false |
Invariants | role-choice: playingDevice and playingEntity are mutually exclusive ((playingDevice | playingEntity).count() <= 1 ) |
100. Procedure.participant:serviceDeliveryLocation | |
Slice Name | serviceDeliveryLocation |
Short | participant |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
102. Procedure.participant:serviceDeliveryLocation.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="LOC" Location (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:4515-7766). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAParticipationType (required to http://hl7.org/cda/stds/core/ValueSet/CDAParticipationType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | LOC |
104. Procedure.participant:serviceDeliveryLocation.participantRole | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Service Delivery Location (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.32) (CONF:4515-15912). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Service Delivery Location) |
Is Modifier | false |
Invariants | role-choice: playingDevice and playingEntity are mutually exclusive ((playingDevice | playingEntity).count() <= 1 )should-addr: SHOULD contain addr ( addr.exists() )should-telecom: SHOULD contain telecom ( telecom.exists() ) |
106. Procedure.entryRelationship | |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32988) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
Slicing | This element introduces a set of slices on Procedure.entryRelationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
108. Procedure.entryRelationship:encounter | |
Slice Name | encounter |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7768) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
110. Procedure.entryRelationship:encounter.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7769). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
112. Procedure.entryRelationship:encounter.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-8009). |
Control | 1..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | true |
114. Procedure.entryRelationship:encounter.encounter | |
Comments | SHALL contain exactly one [1..1] encounter (CONF:4515-7770). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
116. Procedure.entryRelationship:encounter.encounter.classCode | |
Comments | This encounter SHALL contain exactly one [1..1] @classCode="ENC" Encounter (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7771). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAActClass (required to http://hl7.org/cda/stds/core/ValueSet/CDAActClass ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | ENC |
118. Procedure.entryRelationship:encounter.encounter.moodCode | |
Comments | This encounter SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7772). |
Control | 1..1 |
Binding | The codes SHALL be taken from XDocumentEncounterMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentEncounterMood|2.0.0 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | EVN |
120. Procedure.entryRelationship:encounter.encounter.id | |
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. |
Short | Set the encounter ID to the ID of an encounter in another section to signify they are the same encounter (CONF:4515-16843).Logical id of this artifact |
Comments | This encounter SHALL contain exactly one [1..1] id (CONF:4515-7773). Within the context of the FHIR RESTful interactions, the resource has an id except for cases like the create and conditional update. Otherwise, the use of the resouce id depends on the given use case. |
Control | 10..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IIid |
Is Modifier | false |
122. Procedure.entryRelationship:instruction | |
Slice Name | instruction |
Short | entryRelationship |
Comments | MAY contain zero or one [0..1] entryRelationship (CONF:4515-7775) such that it |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
124. Procedure.entryRelationship:instruction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7776). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | SUBJ |
126. Procedure.entryRelationship:instruction.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-7777). |
Control | 1..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | true |
128. Procedure.entryRelationship:instruction.act | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Instruction (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:4515-31395). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Instruction) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
130. Procedure.entryRelationship:instruction.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
132. Procedure.entryRelationship:indication | |
Slice Name | indication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7779) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
134. Procedure.entryRelationship:indication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7780). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
136. Procedure.entryRelationship:indication.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
138. Procedure.entryRelationship:indication.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-15914). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )should-effectiveTime: SHOULD contain effectiveTime ( effectiveTime.exists() )indication-value: If the ID element does not reference a problem recorded elsewhere in the document, then observation/value must be populated with a coded entry. ( value.exists() or (%resource.descendants().ofType(CDA.Observation).where(id.exists($this.root = %context.id.first().root and $this.extension ~ %context.id.first().extension) and value.exists())) ) |
140. Procedure.entryRelationship:medication | |
Slice Name | medication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7886) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
142. Procedure.entryRelationship:medication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7887). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
144. Procedure.entryRelationship:medication.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
146. Procedure.entryRelationship:medication.substanceAdministration | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Medication Activity (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.16:2014-06-09) (CONF:4515-15915). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration(Medication Activity) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )1098-7513: SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-7513) such that it **SHALL** contain exactly one [1..1] @xsi:type="PIVL_TS" or "EIVL_TS" (CONF:1098-28499). ( effectiveTime.ofType(CDA.PIVL_TS).exists() or effectiveTime.ofType(CDA.EIVL_TS).exists() )should-routeCode: SHOULD contain routeCode ( routeCode.exists() )dose-unit-or-admin-unit: If doseQuantity/@unit is present, then administrationUnitCode SHALL NOT be present. ( doseQuantity.unit.exists() implies administrationUnitCode.empty() )should-author: SHOULD contain author ( author.exists() ) |
148. Procedure.entryRelationship:reaction | |
Slice Name | reaction |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32473) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
150. Procedure.entryRelationship:reaction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32474). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
152. Procedure.entryRelationship:reaction.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
154. Procedure.entryRelationship:reaction.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Reaction Observation (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:4515-32475). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Reaction Observation) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )should-effectiveTime: SHOULD contain effectiveTime ( effectiveTime.exists() ) |
156. Procedure.entryRelationship:assessmentScaleObs | |
Slice Name | assessmentScaleObs |
Short | When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health intervention procedure, that Assessment scale **MAY** contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments. |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32985) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
158. Procedure.entryRelationship:assessmentScaleObs.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32987). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
160. Procedure.entryRelationship:assessmentScaleObs.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
162. Procedure.entryRelationship:assessmentScaleObs.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32986). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
164. Procedure.entryRelationship:entryReference | |
Slice Name | entryReference |
Short | When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference **MAY** refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments. |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
166. Procedure.entryRelationship:entryReference.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32990). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
168. Procedure.entryRelationship:entryReference.act | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32989). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
170. Procedure.entryRelationship:entryReference.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
Guidance on how to interpret the contents of this table can be found here
0. Procedure | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Control | 1..1 |
Is Modifier | false |
Logical Container | ClinicalDocument (CDA Class) |
Validation | Instance of this type are validated by templateId |
XML Format | In the XML format, this property has the namespace urn:hl7-org:v3 . |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )active-high-ts-after-document: If the procedure is active and contains a high effectiveTime, this time SHALL be after the ClinicalDocument/effectiveTime ( (statusCode.code = 'active' and effectiveTime.high.value.exists()) implies effectiveTime.high.value > %resource.effectiveTime.value )should-targetSiteCode: SHOULD contain targetSiteCode ( targetSiteCode.exists() )should-performer: SHOULD contain performer ( performer.exists() )should-author: SHOULD contain author ( author.exists() ) |
2. Procedure.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
4. Procedure.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
6. Procedure.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
8. Procedure.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
10. Procedure.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
12. Procedure.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
14. Procedure.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
16. Procedure.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
18. Procedure.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
Slicing | This element introduces a set of slices on Procedure.templateId . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
20. Procedure.templateId:procedure | |
Slice Name | procedure |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
22. Procedure.templateId:procedure.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
24. Procedure.templateId:procedure.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
26. Procedure.templateId:procedure.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
28. Procedure.templateId:procedure.root | |
Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Pattern Value | 2.16.840.1.113883.10.20.22.4.14 |
30. Procedure.templateId:procedure.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
Pattern Value | 2024-05-01 |
32. Procedure.classCode | |
Comments | SHALL contain exactly one [1..1] @classCode="PROC" Procedure (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7652). |
Control | 1..1 |
Binding | The codes SHALL be taken from ActClassProcedure (required to http://terminology.hl7.org/ValueSet/v3-ActClassProcedure ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | PROC |
34. Procedure.moodCode | |
Comments | SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7653). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_DocumentProcedureMood (required to http://terminology.hl7.org/ValueSet/v3-xDocumentProcedureMood ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | EVN |
36. Procedure.id | |
Comments | SHALL contain at least one [1..*] id (CONF:4515-7655). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
38. Procedure.code | |
Definition | Drawn from concept domain ActCode |
Short | (USCDI) SDOH Interventions |
Comments | SHALL contain exactly one [1..1] code (CONF:4515-7656). |
Control | 1..1 |
Binding | The codes SHOULD be taken from US Core Procedure Codes (preferred to http://hl7.org/fhir/us/core/ValueSet/us-core-procedure-code ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
Invariants | should-otext-ref-value: SHOULD contain originalText/reference/@value (originalText.reference.value.exists() ) |
40. Procedure.code.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
42. Procedure.code.code | |
Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
Control | 0..1 |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code |
44. Procedure.code.codeSystem | |
Definition | Specifies the code system that defines the code. |
Control | 0..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System |
46. Procedure.code.codeSystemName | |
Definition | The common name of the coding system. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Name |
48. Procedure.code.codeSystemVersion | |
Definition | If applicable, a version descriptor defined specifically for the given code system. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Version |
50. Procedure.code.displayName | |
Definition | A name or title for the code, under which the sending system shows the code value to its users. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Display Name |
52. Procedure.code.sdtcValueSet | |
Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string(oid: ISO Object Identifier) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namevalueSet . |
54. Procedure.code.sdtcValueSetVersion | |
Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namevalueSetVersion . |
56. Procedure.code.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Short | SHOULD reference the portion of narrative corresponding to this code |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Original Text |
58. Procedure.code.originalText.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
60. Procedure.code.originalText.compression | |
Definition | Indicates whether the raw byte data is compressed, and what compression algorithm was used. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDACompressionAlgorithm (required to http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Compression |
62. Procedure.code.originalText.integrityCheck | |
Definition | The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created. |
Control | 0..1 |
Type | base64Binary(bin: Binary Data) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Integrity Check |
64. Procedure.code.originalText.integrityCheckAlgorithm | |
Definition | Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage. |
Control | 0..1 |
Binding | The codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm|2.0.0 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Integrity Check Algorithm |
66. Procedure.code.originalText.language | |
Definition | For character based information the language property specifies the human language of the text. |
Control | 0..1 |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Language |
68. Procedure.code.originalText.mediaType | |
Definition | Identifies the type of the encapsulated data and identifies a method to interpret or render the data. |
Control | 0..1 |
Binding | For example codes, see MediaType (example to http://terminology.hl7.org/ValueSet/v3-MediaType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Media Type |
70. Procedure.code.originalText.representation | |
Control | 0..1 |
Binding | The codes SHALL be taken from CDABinaryDataEncoding (required to http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
72. Procedure.code.originalText.xmlText | |
Definition | Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.) |
Short | Allows for mixed text content. If @representation='B64', this SHALL be a base64binary string. |
Comments | This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as unadorned text. |
74. Procedure.code.originalText.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
Label | Reference |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
76. Procedure.code.originalText.thumbnail | |
Definition | An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Thumbnail |
78. Procedure.code.qualifier | |
Definition | Specifies additional codes that increase the specificity of the the primary code. |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
Label | Qualifier |
80. Procedure.code.translation | |
Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
XML Format | The type of this property is determined using the " xsi:type attribute. |
Label | Translation |
82. Procedure.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
84. Procedure.text | |
Short | SHOULD reference the portion of section narrative text corresponding to this entry |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
86. Procedure.text.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
88. Procedure.text.compression | |
Definition | Indicates whether the raw byte data is compressed, and what compression algorithm was used. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDACompressionAlgorithm (required to http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Compression |
90. Procedure.text.integrityCheck | |
Definition | The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created. |
Control | 0..1 |
Type | base64Binary(bin: Binary Data) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Integrity Check |
92. Procedure.text.integrityCheckAlgorithm | |
Definition | Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage. |
Control | 0..1 |
Binding | The codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm|2.0.0 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Integrity Check Algorithm |
94. Procedure.text.language | |
Definition | For character based information the language property specifies the human language of the text. |
Control | 0..1 |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Language |
96. Procedure.text.mediaType | |
Definition | Identifies the type of the encapsulated data and identifies a method to interpret or render the data. |
Control | 0..1 |
Binding | For example codes, see MediaType (example to http://terminology.hl7.org/ValueSet/v3-MediaType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Media Type |
98. Procedure.text.representation | |
Control | 0..1 |
Binding | The codes SHALL be taken from CDABinaryDataEncoding (required to http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
100. Procedure.text.xmlText | |
Definition | Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.) |
Short | Allows for mixed text content. If @representation='B64', this SHALL be a base64binary string. |
Comments | This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as unadorned text. |
102. Procedure.text.reference | |
Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
Label | Reference |
Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#') ) |
104. Procedure.text.thumbnail | |
Definition | An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Thumbnail |
106. Procedure.statusCode | |
Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-7661). |
Control | 1..1 |
Binding | The codes SHALL be taken from ActStatus (required to http://terminology.hl7.org/ValueSet/v3-ActStatus ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
108. Procedure.statusCode.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..0 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
110. Procedure.statusCode.code | |
Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
Control | 1..1 |
Binding | The codes SHALL be taken from ProcedureAct statusCode (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.22 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code |
112. Procedure.statusCode.codeSystem | |
Definition | Specifies the code system that defines the code. |
Control | 0..0 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System |
114. Procedure.statusCode.codeSystemName | |
Definition | The common name of the coding system. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Name |
116. Procedure.statusCode.codeSystemVersion | |
Definition | If applicable, a version descriptor defined specifically for the given code system. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Code System Version |
118. Procedure.statusCode.displayName | |
Definition | A name or title for the code, under which the sending system shows the code value to its users. |
Control | 0..0 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Display Name |
120. Procedure.statusCode.sdtcValueSet | |
Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string(oid: ISO Object Identifier) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namevalueSet . |
122. Procedure.statusCode.sdtcValueSetVersion | |
Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namevalueSetVersion . |
124. Procedure.statusCode.originalText | |
Definition | The text or phrase used as the basis for the coding. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
Label | Original Text |
126. Procedure.statusCode.qualifier | |
Definition | Specifies additional codes that increase the specificity of the the primary code. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
Label | Qualifier |
128. Procedure.statusCode.translation | |
Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
XML Format | The type of this property is determined using the " xsi:type attribute. |
Label | Translation |
130. Procedure.effectiveTime | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Short | (USCDI) Performance Time |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS(US Realm Date and Time - Interval) |
Is Modifier | false |
Invariants | ivl-ts-center: Center cannot co-exist with low or high (center.empty() or (low.empty() and high.empty()) )ivl-value-shall: If a time interval contains @value, then it shall be precise to at least the day. ( value.exists() implies value.toString().length() >= 10 )ivl-value-should: If a time interval contains @value, then it SHOULD contain a time component. ( value.exists() implies value.toString().length() > 10 )should-value: SHOULD contain value ( value.exists() )ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime ( value.exists() implies value <= %resource.effectiveTime.value ) |
132. Procedure.effectiveTime.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
134. Procedure.effectiveTime.value | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Short | Indicates historical procedure or an instance of a procedure where precision may be only a date or even a year. |
Control | 0..1 |
Type | dateTime(ts: Point in Time) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Date Format | YYYYMMDDHHMMSS.UUUU[+|-ZZzz] |
XML Format | In the XML format, this property is represented as an attribute. |
136. Procedure.effectiveTime.operator | |
Definition | A code specifying whether the set component is included (union) or excluded (set-difference) from the set, or other set operations with the current set component and the set as constructed from the representation stream up to the current point. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDASetOperator (required to http://hl7.org/cda/stds/core/ValueSet/CDASetOperator ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | I |
138. Procedure.effectiveTime.low | |
Definition | This is the low limit of the interval. |
Short | Indicates when a procedure started |
Comments | MAY contain zero or one [0..1] low |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS |
Label | Low Boundary |
Invariants | ts-shall-day: **SHALL** be precise to at least the day (nullFlavor.exists() or value.toString().length() >= 10 )ts-should-minute: **SHOULD** be precise to at least the minute ( nullFlavor.exists() or value.toString().length() > 10 )ts-value-before-document: Time value must be equal to or before ClinicalDocument/effectiveTime ( value.exists() implies value <= %resource.effectiveTime.value ) |
140. Procedure.effectiveTime.low.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
142. Procedure.effectiveTime.low.value | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Control | 0..1 |
Type | dateTime(ts: Point in Time) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Date Format | YYYYMMDDHHMMSS.UUUU[+|-ZZzz] |
XML Format | In the XML format, this property is represented as an attribute. |
144. Procedure.effectiveTime.low.inclusive | |
Definition | Specifies whether the limit is included in the interval (interval is closed) or excluded from the interval (interval is open). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
146. Procedure.effectiveTime.center | |
Definition | The arithmetic mean of the interval (low plus high divided by 2). The purpose of distinguishing the center as a semantic property is for conversions of intervals from and to point values. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TS |
Label | Central Value |
148. Procedure.effectiveTime.width | |
Definition | The difference between high and low boundary. The purpose of distinguishing a width property is to handle all cases of incomplete information symmetrically. In any interval representation only two of the three properties high, low, and width need to be stated and the third can be derived. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/PQ |
Label | Width |
150. Procedure.effectiveTime.high | |
Definition | This is the high limit of the interval. |
Short | Indicates when a procedure ended. If the statusCode='active', this must be after the ClinicalDcument/effectiveTime |
Comments | MAY contain zero or one [0..1] high |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVXB-TS |
Label | High Boundary |
Invariants | ts-shall-day: **SHALL** be precise to at least the day (nullFlavor.exists() or value.toString().length() >= 10 )ts-should-minute: **SHOULD** be precise to at least the minute ( nullFlavor.exists() or value.toString().length() > 10 ) |
152. Procedure.effectiveTime.high.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
154. Procedure.effectiveTime.high.value | |
Definition | A quantity specifying a point on the axis of natural time. A point in time is most often represented as a calendar expression. |
Control | 0..1 |
Type | dateTime(ts: Point in Time) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Date Format | YYYYMMDDHHMMSS.UUUU[+|-ZZzz] |
XML Format | In the XML format, this property is represented as an attribute. |
156. Procedure.effectiveTime.high.inclusive | |
Definition | Specifies whether the limit is included in the interval (interval is closed) or excluded from the interval (interval is open). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
158. Procedure.priorityCode | |
Comments | MAY contain zero or one [0..1] priorityCode, which SHALL be selected from ValueSet ActPriority urn:oid:2.16.840.1.113883.1.11.16866 DYNAMIC (CONF:4515-7668). |
Control | 0..1 |
Binding | The codes SHALL be taken from ActPriority (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.1.11.16866 ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
160. Procedure.languageCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
162. Procedure.methodCode | |
Definition | Drawn from concept domain ProcedureMethod |
Short | MethodCode **SHALL NOT** conflict with the method inherent in Procedure / code (CONF:4515-7890). |
Comments | MAY contain zero or one [0..1] methodCode (CONF:4515-7670). |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
164. Procedure.approachSiteCode | |
Definition | Drawn from concept domain ActSite |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
166. Procedure.targetSiteCode | |
Definition | Drawn from concept domain ActSite |
Short | In the case of an implanted medical device, targetSiteCode is used to record the location of the device, in or on the patient's body. |
Comments | SHOULD contain zero or more [0..*] targetSiteCode, which SHALL be selected from ValueSet Body Site Value Set urn:oid:2.16.840.1.113883.3.88.12.3221.8.9 DYNAMIC (CONF:4515-7683). |
Control | 0..* |
Binding | The codes SHALL be taken from Body Site Value Set (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.3.88.12.3221.8.9 ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
168. Procedure.subject | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Subject |
170. Procedure.specimen | |
Short | This specimen is for representing specimens obtained from a procedure (CONF:4515-16842). |
Comments | MAY contain zero or more [0..*] specimen (CONF:4515-7697). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
172. Procedure.specimen.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
174. Procedure.specimen.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
176. Procedure.specimen.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
178. Procedure.specimen.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
180. Procedure.specimen.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
182. Procedure.specimen.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
184. Procedure.specimen.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
186. Procedure.specimen.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
188. Procedure.specimen.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
190. Procedure.specimen.typeCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from CDAParticipationType (required to http://hl7.org/cda/stds/core/ValueSet/CDAParticipationType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | SPC |
192. Procedure.specimen.specimenRole | |
Comments | The specimen, if present, SHALL contain exactly one [1..1] specimenRole (CONF:4515-7704). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SpecimenRole |
Invariants | should-id: SHOULD contain id (id.exists() ) |
194. Procedure.specimen.specimenRole.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
196. Procedure.specimen.specimenRole.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
198. Procedure.specimen.specimenRole.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
200. Procedure.specimen.specimenRole.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
202. Procedure.specimen.specimenRole.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
204. Procedure.specimen.specimenRole.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
206. Procedure.specimen.specimenRole.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
208. Procedure.specimen.specimenRole.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
210. Procedure.specimen.specimenRole.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
212. Procedure.specimen.specimenRole.classCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from RoleClassSpecimen (required to http://terminology.hl7.org/ValueSet/v3-RoleClassSpecimen ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | SPEC |
214. Procedure.specimen.specimenRole.id | |
Short | If you want to indicate that the Procedure and the Results are referring to the same specimen, the Procedure/specimen/specimenRole/id **SHOULD** be set to equal an Organizer/specimen/specimenRole/id (CONF:4515-29744). |
Comments | This specimenRole SHOULD contain zero or more [0..*] id (CONF:4515-7716). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
216. Procedure.specimen.specimenRole.sdtcIdentifiedBy | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IdentifiedBy |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameidentifiedBy . |
218. Procedure.specimen.specimenRole.specimenPlayingEntity | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/PlayingEntity |
220. Procedure.performer | |
Comments | SHOULD contain zero or more [0..*] performer (CONF:4515-7718) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2 |
222. Procedure.performer.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
224. Procedure.performer.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
226. Procedure.performer.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
228. Procedure.performer.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
230. Procedure.performer.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
232. Procedure.performer.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
234. Procedure.performer.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
236. Procedure.performer.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
238. Procedure.performer.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
240. Procedure.performer.typeCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ParticipationPhysicalPerformer (required to http://terminology.hl7.org/ValueSet/v3-ParticipationPhysicalPerformer ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | PRF |
242. Procedure.performer.sdtcFunctionCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namefunctionCode . |
244. Procedure.performer.time | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
246. Procedure.performer.modeCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
248. Procedure.performer.assignedEntity | |
Comments | SHALL contain exactly one [1..1] assignedEntity (CONF:4515-7720). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AssignedEntity |
Invariants | should-assignedPerson: SHOULD contain assignedPerson (assignedPerson.exists() )should-representedOrganization: SHOULD contain representedOrganization ( representedOrganization.exists() ) |
250. Procedure.performer.assignedEntity.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
252. Procedure.performer.assignedEntity.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
254. Procedure.performer.assignedEntity.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
256. Procedure.performer.assignedEntity.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
258. Procedure.performer.assignedEntity.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
260. Procedure.performer.assignedEntity.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
262. Procedure.performer.assignedEntity.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
264. Procedure.performer.assignedEntity.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
266. Procedure.performer.assignedEntity.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
268. Procedure.performer.assignedEntity.classCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from RoleClassAssignedEntity (required to http://terminology.hl7.org/ValueSet/v3-RoleClassAssignedEntity ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | ASSIGNED |
270. Procedure.performer.assignedEntity.id | |
Comments | This assignedEntity SHALL contain at least one [1..*] id (CONF:4515-7722). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
272. Procedure.performer.assignedEntity.sdtcIdentifiedBy | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IdentifiedBy |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameidentifiedBy . |
274. Procedure.performer.assignedEntity.code | |
Control | 0..1 |
Binding | For example codes, see CDARoleCode (example to http://hl7.org/cda/stds/core/ValueSet/CDARoleCode ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
276. Procedure.performer.assignedEntity.addr | |
Definition | Mailing and home or office addresses. A sequence of address parts, such as street or post office Box, city, postal code, country, etc. |
Short | Base for all types and resources |
Comments | This assignedEntity SHALL contain at least one [1..*] addr (CONF:4515-7731). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
Is Modifier | false |
Invariants | shall-city: SHALL contain exactly one [1..1] city (CONF:81-7292). (nullFlavor.exists() or item.city.count() = 1 )shall-streetAddressLine: SHALL contain at least one and not more than 4 streetAddressLine (CONF:81-7291). ( nullFlavor.exists() or (item.streetAddressLine.count() >= 1 and item.streetAddressLine.count() <= 4) )should-use: SHOULD contain @use ( nullFlavor.exists() or use.exists() )should-country: SHOULD contain country ( nullFlavor.exists() or item.country.exists() )81-7296: **SHALL NOT** have mixed content except for white space (CONF:81-7296) ( item.xmlText.empty() )81-10024: If the country is US, the state element is required and SHALL be selected from ValueSet StateValueSet but SHOULD have @nullFlavor if the state is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the state MAY be present but MAY be bound to different vocabularies (CONF:81-10024). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.state.exists(nullFlavor.exists() or xmlText.memberOf('http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state')) )81-10025: If the country is US, the postalCode element is required but SHOULD have @nullFlavor if the postalCode is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the postalCode MAY be present but MAY be bound to different vocabularies (CONF:81-10025). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.postalCode.exists(nullFlavor.exists() or xmlText.matches('[0-9]{5}(-[0-9]{4})?')) )shall-max-ad-parts: SHALL have at most one of each: state, city, postalCode, and country ( (item.state.empty() or item.state.count() = 1) and (item.city.empty() or item.city.count() = 1) and (item.postalCode.empty() or item.postalCode.count() = 1) and (item.country.empty() or item.country.count() = 1) ) |
278. Procedure.performer.assignedEntity.telecom | |
Comments | This assignedEntity SHALL contain at least one [1..*] telecom (CONF:4515-7732). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
280. Procedure.performer.assignedEntity.assignedPerson | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] assignedPerson. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Person |
282. Procedure.performer.assignedEntity.assignedPerson.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
284. Procedure.performer.assignedEntity.assignedPerson.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
286. Procedure.performer.assignedEntity.assignedPerson.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
288. Procedure.performer.assignedEntity.assignedPerson.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
290. Procedure.performer.assignedEntity.assignedPerson.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
292. Procedure.performer.assignedEntity.assignedPerson.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
294. Procedure.performer.assignedEntity.assignedPerson.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
296. Procedure.performer.assignedEntity.assignedPerson.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
298. Procedure.performer.assignedEntity.assignedPerson.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
300. Procedure.performer.assignedEntity.assignedPerson.classCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from EntityClassLivingSubject (required to http://terminology.hl7.org/ValueSet/v3-EntityClassLivingSubject ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | PSN |
302. Procedure.performer.assignedEntity.assignedPerson.determinerCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from EntityDeterminer (required to http://terminology.hl7.org/ValueSet/v3-EntityDeterminer ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | INSTANCE |
304. Procedure.performer.assignedEntity.assignedPerson.name | |
Definition | A name for a person. A sequence of name parts, such as given name or family name, prefix, suffix, etc. Examples for person name values are "Jim Bob Walton, Jr.", "Adam Everyman", etc. A person name may be as simple as a character string or may consist of several person name parts, such as, "Jim", "Bob", "Walton", and "Jr.". PN differs from EN because the qualifier type cannot include LS (Legal Status). |
Short | Base for all types and resources |
Comments | This assignedPerson SHALL contain at least one [1..*] US Realm Person Name (PN.US.FIELDED). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/PN(US Realm Person Name (PN.US.FIELDED)) |
Is Modifier | false |
Invariants | pn-no-ls: No PN name part may have a qualifier of LS. ((item.delimiter | item.family | item.given | item.prefix | item.suffix).where(qualifier.where($this = 'LS').exists()).empty() )81-9371: The content of name **SHALL** be either a conformant Patient Name (PTN.US.FIELDED), or a string (CONF:81-9371). ( conformsTo('http://hl7.org/cda/us/ccda/StructureDefinition/USRealmPatientNamePTNUSFIELDED') or item.xmlText.exists() )81-9372: The string **SHALL NOT** contain name parts (CONF:81-9372). ( item.xmlText.exists() implies (item.delimiter | item.family | item.given | item.prefix | item.suffix).empty() ) |
306. Procedure.performer.assignedEntity.assignedPerson.sdtcDesc | |
Definition | The desc extension allows multimedia depictions of patients, healthcare providers, or other individuals to be included in a CDA document. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namedesc . |
308. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship | |
Definition | Each participant role other than an informant/relatedEntity may have zero or more relationship roles with the patient. Each of these roles can be expressed with an asPatientRelationship element which further describes the type of role using a code element. |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRoot |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameasPatientRelationship . |
310. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
312. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
314. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
316. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
318. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
320. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
322. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
324. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
326. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
328. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.classCode | |
Control | 1..1 |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | PRS |
330. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.determinerCode | |
Control | 0..1 |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | INSTANCE |
332. Procedure.performer.assignedEntity.assignedPerson.sdtcAsPatientRelationship.code | |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc . |
334. Procedure.performer.assignedEntity.representedOrganization | |
Comments | This assignedEntity SHOULD contain zero or one [0..1] representedOrganization (CONF:4515-7733). |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organization |
Invariants | should-id: SHOULD contain id (id.exists() ) |
336. Procedure.performer.assignedEntity.representedOrganization.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
338. Procedure.performer.assignedEntity.representedOrganization.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
340. Procedure.performer.assignedEntity.representedOrganization.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
342. Procedure.performer.assignedEntity.representedOrganization.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
344. Procedure.performer.assignedEntity.representedOrganization.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
346. Procedure.performer.assignedEntity.representedOrganization.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
348. Procedure.performer.assignedEntity.representedOrganization.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
350. Procedure.performer.assignedEntity.representedOrganization.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
352. Procedure.performer.assignedEntity.representedOrganization.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
354. Procedure.performer.assignedEntity.representedOrganization.classCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from EntityClassOrganization (required to http://terminology.hl7.org/ValueSet/v3-EntityClassOrganization ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | ORG |
356. Procedure.performer.assignedEntity.representedOrganization.determinerCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from EntityDeterminer (required to http://terminology.hl7.org/ValueSet/v3-EntityDeterminer ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | INSTANCE |
358. Procedure.performer.assignedEntity.representedOrganization.id | |
Comments | The representedOrganization, if present, SHOULD contain zero or more [0..*] id (CONF:4515-7734). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
360. Procedure.performer.assignedEntity.representedOrganization.name | |
Comments | The representedOrganization, if present, MAY contain zero or more [0..*] name (CONF:4515-7735). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ON |
362. Procedure.performer.assignedEntity.representedOrganization.telecom | |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] telecom (CONF:4515-7737). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
364. Procedure.performer.assignedEntity.representedOrganization.addr | |
Definition | Mailing and home or office addresses. A sequence of address parts, such as street or post office Box, city, postal code, country, etc. |
Short | Base for all types and resources |
Comments | The representedOrganization, if present, SHALL contain at least one [1..*] addr (CONF:4515-7736). |
Control | 1..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/AD(US Realm Address) |
Is Modifier | false |
Invariants | shall-city: SHALL contain exactly one [1..1] city (CONF:81-7292). (nullFlavor.exists() or item.city.count() = 1 )shall-streetAddressLine: SHALL contain at least one and not more than 4 streetAddressLine (CONF:81-7291). ( nullFlavor.exists() or (item.streetAddressLine.count() >= 1 and item.streetAddressLine.count() <= 4) )should-use: SHOULD contain @use ( nullFlavor.exists() or use.exists() )should-country: SHOULD contain country ( nullFlavor.exists() or item.country.exists() )81-7296: **SHALL NOT** have mixed content except for white space (CONF:81-7296) ( item.xmlText.empty() )81-10024: If the country is US, the state element is required and SHALL be selected from ValueSet StateValueSet but SHOULD have @nullFlavor if the state is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the state MAY be present but MAY be bound to different vocabularies (CONF:81-10024). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.state.exists(nullFlavor.exists() or xmlText.memberOf('http://hl7.org/fhir/us/core/ValueSet/us-core-usps-state')) )81-10025: If the country is US, the postalCode element is required but SHOULD have @nullFlavor if the postalCode is unknown. If country is not specified, it's assumed to be US. If country is something other than US, the postalCode MAY be present but MAY be bound to different vocabularies (CONF:81-10025). ( nullFlavor.exists() or (item.country.exists() and item.country.xmlText != 'US' and item.country.xmlText != 'USA') or item.postalCode.exists(nullFlavor.exists() or xmlText.matches('[0-9]{5}(-[0-9]{4})?')) )shall-max-ad-parts: SHALL have at most one of each: state, city, postalCode, and country ( (item.state.empty() or item.state.count() = 1) and (item.city.empty() or item.city.count() = 1) and (item.postalCode.empty() or item.postalCode.count() = 1) and (item.country.empty() or item.country.count() = 1) ) |
366. Procedure.performer.assignedEntity.representedOrganization.standardIndustryClassCode | |
Control | 0..1 |
Binding | For example codes, see OrganizationIndustryClassNAICS (example to http://terminology.hl7.org/ValueSet/v3-OrganizationIndustryClassNAICS ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
368. Procedure.performer.assignedEntity.representedOrganization.asOrganizationPartOf | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/OrganizationPartOf |
370. Procedure.performer.assignedEntity.sdtcPatient | |
Control | 0..1 |
Type | http://hl7.org/fhir/StructureDefinition/Base |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namepatient . |
372. Procedure.performer.assignedEntity.sdtcPatient.id | |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc . |
374. Procedure.author | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-32479). |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
Is Modifier | false |
376. Procedure.informant | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Informant |
378. Procedure.participant | |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7765) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
Slicing | This element introduces a set of slices on Procedure.participant . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
380. Procedure.participant:productInstance | |
Slice Name | productInstance |
Short | participant |
Comments | MAY contain zero or more [0..*] participant (CONF:4515-7751) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
382. Procedure.participant:productInstance.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
384. Procedure.participant:productInstance.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
386. Procedure.participant:productInstance.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
388. Procedure.participant:productInstance.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
390. Procedure.participant:productInstance.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
392. Procedure.participant:productInstance.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
394. Procedure.participant:productInstance.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
396. Procedure.participant:productInstance.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
398. Procedure.participant:productInstance.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
400. Procedure.participant:productInstance.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="DEV" Device (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7752). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAParticipationType (required to http://hl7.org/cda/stds/core/ValueSet/CDAParticipationType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | DEV |
402. Procedure.participant:productInstance.contextControlCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from CDAContextControl (required to http://hl7.org/cda/stds/core/ValueSet/CDAContextControl ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | OP |
404. Procedure.participant:productInstance.sdtcFunctionCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namefunctionCode . |
406. Procedure.participant:productInstance.time | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
408. Procedure.participant:productInstance.awarenessCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
410. Procedure.participant:productInstance.participantRole | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Product Instance (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.37) (CONF:4515-15911). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Product Instance) |
Is Modifier | false |
Invariants | role-choice: playingDevice and playingEntity are mutually exclusive ((playingDevice | playingEntity).count() <= 1 ) |
412. Procedure.participant:serviceDeliveryLocation | |
Slice Name | serviceDeliveryLocation |
Short | participant |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
414. Procedure.participant:serviceDeliveryLocation.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
416. Procedure.participant:serviceDeliveryLocation.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
418. Procedure.participant:serviceDeliveryLocation.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
420. Procedure.participant:serviceDeliveryLocation.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
422. Procedure.participant:serviceDeliveryLocation.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
424. Procedure.participant:serviceDeliveryLocation.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
426. Procedure.participant:serviceDeliveryLocation.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
428. Procedure.participant:serviceDeliveryLocation.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
430. Procedure.participant:serviceDeliveryLocation.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
432. Procedure.participant:serviceDeliveryLocation.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="LOC" Location (CodeSystem: HL7ParticipationType urn:oid:2.16.840.1.113883.5.90 STATIC) (CONF:4515-7766). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAParticipationType (required to http://hl7.org/cda/stds/core/ValueSet/CDAParticipationType ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | LOC |
434. Procedure.participant:serviceDeliveryLocation.contextControlCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from CDAContextControl (required to http://hl7.org/cda/stds/core/ValueSet/CDAContextControl ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | OP |
436. Procedure.participant:serviceDeliveryLocation.sdtcFunctionCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namefunctionCode . |
438. Procedure.participant:serviceDeliveryLocation.time | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
440. Procedure.participant:serviceDeliveryLocation.awarenessCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
442. Procedure.participant:serviceDeliveryLocation.participantRole | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Service Delivery Location (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.32) (CONF:4515-15912). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ParticipantRole(Service Delivery Location) |
Is Modifier | false |
Invariants | role-choice: playingDevice and playingEntity are mutually exclusive ((playingDevice | playingEntity).count() <= 1 )should-addr: SHOULD contain addr ( addr.exists() )should-telecom: SHOULD contain telecom ( telecom.exists() ) |
444. Procedure.entryRelationship | |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32988) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
Slicing | This element introduces a set of slices on Procedure.entryRelationship . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
446. Procedure.entryRelationship:encounter | |
Slice Name | encounter |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7768) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
448. Procedure.entryRelationship:encounter.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
450. Procedure.entryRelationship:encounter.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
452. Procedure.entryRelationship:encounter.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
454. Procedure.entryRelationship:encounter.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
456. Procedure.entryRelationship:encounter.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
458. Procedure.entryRelationship:encounter.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
460. Procedure.entryRelationship:encounter.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
462. Procedure.entryRelationship:encounter.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
464. Procedure.entryRelationship:encounter.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
466. Procedure.entryRelationship:encounter.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7769). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
468. Procedure.entryRelationship:encounter.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-8009). |
Control | 1..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | true |
470. Procedure.entryRelationship:encounter.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
472. Procedure.entryRelationship:encounter.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
474. Procedure.entryRelationship:encounter.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
476. Procedure.entryRelationship:encounter.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
478. Procedure.entryRelationship:encounter.act | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
480. Procedure.entryRelationship:encounter.encounter | |
Comments | SHALL contain exactly one [1..1] encounter (CONF:4515-7770). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
482. Procedure.entryRelationship:encounter.encounter.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
484. Procedure.entryRelationship:encounter.encounter.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
486. Procedure.entryRelationship:encounter.encounter.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
488. Procedure.entryRelationship:encounter.encounter.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
490. Procedure.entryRelationship:encounter.encounter.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
492. Procedure.entryRelationship:encounter.encounter.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
494. Procedure.entryRelationship:encounter.encounter.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
496. Procedure.entryRelationship:encounter.encounter.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
498. Procedure.entryRelationship:encounter.encounter.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
500. Procedure.entryRelationship:encounter.encounter.classCode | |
Comments | This encounter SHALL contain exactly one [1..1] @classCode="ENC" Encounter (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:4515-7771). |
Control | 1..1 |
Binding | The codes SHALL be taken from CDAActClass (required to http://hl7.org/cda/stds/core/ValueSet/CDAActClass ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | ENC |
502. Procedure.entryRelationship:encounter.encounter.moodCode | |
Comments | This encounter SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:4515-7772). |
Control | 1..1 |
Binding | The codes SHALL be taken from XDocumentEncounterMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentEncounterMood|2.0.0 ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | EVN |
504. Procedure.entryRelationship:encounter.encounter.id | |
Short | Set the encounter ID to the ID of an encounter in another section to signify they are the same encounter (CONF:4515-16843). |
Comments | This encounter SHALL contain exactly one [1..1] id (CONF:4515-7773). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
506. Procedure.entryRelationship:encounter.encounter.code | |
Control | 0..1 |
Binding | For example codes, see ActEncounterCode (example to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
508. Procedure.entryRelationship:encounter.encounter.text | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
510. Procedure.entryRelationship:encounter.encounter.statusCode | |
Control | 0..1 |
Binding | The codes SHALL be taken from ActStatus (required to http://terminology.hl7.org/ValueSet/v3-ActStatus ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
512. Procedure.entryRelationship:encounter.encounter.effectiveTime | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
514. Procedure.entryRelationship:encounter.encounter.sdtcDischargeDispositionCode | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual namedischargeDispositionCode . |
516. Procedure.entryRelationship:encounter.encounter.priorityCode | |
Control | 0..1 |
Binding | For example codes, see ActPriority (example to http://terminology.hl7.org/ValueSet/v3-ActPriority ) |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
518. Procedure.entryRelationship:encounter.encounter.subject | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Subject |
520. Procedure.entryRelationship:encounter.encounter.specimen | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
522. Procedure.entryRelationship:encounter.encounter.performer | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2 |
524. Procedure.entryRelationship:encounter.encounter.author | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Author |
526. Procedure.entryRelationship:encounter.encounter.informant | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Informant |
528. Procedure.entryRelationship:encounter.encounter.participant | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
530. Procedure.entryRelationship:encounter.encounter.entryRelationship | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
532. Procedure.entryRelationship:encounter.encounter.reference | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
534. Procedure.entryRelationship:encounter.encounter.precondition | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition |
536. Procedure.entryRelationship:encounter.encounter.sdtcPrecondition2 | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition2 |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameprecondition2 . |
538. Procedure.entryRelationship:encounter.encounter.sdtcInFulfillmentOf1 | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1 |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameinFulfillmentOf1 . |
540. Procedure.entryRelationship:encounter.observation | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
542. Procedure.entryRelationship:encounter.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
544. Procedure.entryRelationship:encounter.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
546. Procedure.entryRelationship:encounter.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
548. Procedure.entryRelationship:encounter.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
550. Procedure.entryRelationship:encounter.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
552. Procedure.entryRelationship:encounter.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
554. Procedure.entryRelationship:instruction | |
Slice Name | instruction |
Short | entryRelationship |
Comments | MAY contain zero or one [0..1] entryRelationship (CONF:4515-7775) such that it |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
556. Procedure.entryRelationship:instruction.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
558. Procedure.entryRelationship:instruction.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
560. Procedure.entryRelationship:instruction.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
562. Procedure.entryRelationship:instruction.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
564. Procedure.entryRelationship:instruction.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
566. Procedure.entryRelationship:instruction.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
568. Procedure.entryRelationship:instruction.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
570. Procedure.entryRelationship:instruction.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
572. Procedure.entryRelationship:instruction.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
574. Procedure.entryRelationship:instruction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="SUBJ" Has Subject (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7776). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | SUBJ |
576. Procedure.entryRelationship:instruction.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Comments | SHALL contain exactly one [1..1] @inversionInd="true" true (CONF:4515-7777). |
Control | 1..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | true |
578. Procedure.entryRelationship:instruction.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
580. Procedure.entryRelationship:instruction.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
582. Procedure.entryRelationship:instruction.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
584. Procedure.entryRelationship:instruction.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
586. Procedure.entryRelationship:instruction.act | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Instruction (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.20:2014-06-09) (CONF:4515-31395). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Instruction) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
588. Procedure.entryRelationship:instruction.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
590. Procedure.entryRelationship:instruction.observation | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
592. Procedure.entryRelationship:instruction.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
594. Procedure.entryRelationship:instruction.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
596. Procedure.entryRelationship:instruction.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
598. Procedure.entryRelationship:instruction.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
600. Procedure.entryRelationship:instruction.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
602. Procedure.entryRelationship:instruction.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
604. Procedure.entryRelationship:indication | |
Slice Name | indication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7779) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
606. Procedure.entryRelationship:indication.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
608. Procedure.entryRelationship:indication.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
610. Procedure.entryRelationship:indication.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
612. Procedure.entryRelationship:indication.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
614. Procedure.entryRelationship:indication.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
616. Procedure.entryRelationship:indication.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
618. Procedure.entryRelationship:indication.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
620. Procedure.entryRelationship:indication.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
622. Procedure.entryRelationship:indication.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
624. Procedure.entryRelationship:indication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has Reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7780). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
626. Procedure.entryRelationship:indication.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
628. Procedure.entryRelationship:indication.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
630. Procedure.entryRelationship:indication.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
632. Procedure.entryRelationship:indication.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
634. Procedure.entryRelationship:indication.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
636. Procedure.entryRelationship:indication.act | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
638. Procedure.entryRelationship:indication.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
640. Procedure.entryRelationship:indication.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Indication (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.19:2014-06-09) (CONF:4515-15914). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Indication) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )should-effectiveTime: SHOULD contain effectiveTime ( effectiveTime.exists() )indication-value: If the ID element does not reference a problem recorded elsewhere in the document, then observation/value must be populated with a coded entry. ( value.exists() or (%resource.descendants().ofType(CDA.Observation).where(id.exists($this.root = %context.id.first().root and $this.extension ~ %context.id.first().extension) and value.exists())) ) |
642. Procedure.entryRelationship:indication.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
644. Procedure.entryRelationship:indication.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
646. Procedure.entryRelationship:indication.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
648. Procedure.entryRelationship:indication.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
650. Procedure.entryRelationship:indication.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
652. Procedure.entryRelationship:indication.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
654. Procedure.entryRelationship:medication | |
Slice Name | medication |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-7886) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
656. Procedure.entryRelationship:medication.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
658. Procedure.entryRelationship:medication.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
660. Procedure.entryRelationship:medication.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
662. Procedure.entryRelationship:medication.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
664. Procedure.entryRelationship:medication.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
666. Procedure.entryRelationship:medication.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
668. Procedure.entryRelationship:medication.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
670. Procedure.entryRelationship:medication.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
672. Procedure.entryRelationship:medication.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
674. Procedure.entryRelationship:medication.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002 STATIC) (CONF:4515-7887). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
676. Procedure.entryRelationship:medication.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
678. Procedure.entryRelationship:medication.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
680. Procedure.entryRelationship:medication.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
682. Procedure.entryRelationship:medication.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
684. Procedure.entryRelationship:medication.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
686. Procedure.entryRelationship:medication.act | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
688. Procedure.entryRelationship:medication.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
690. Procedure.entryRelationship:medication.observation | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
692. Procedure.entryRelationship:medication.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
694. Procedure.entryRelationship:medication.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
696. Procedure.entryRelationship:medication.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
698. Procedure.entryRelationship:medication.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
700. Procedure.entryRelationship:medication.substanceAdministration | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Medication Activity (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.16:2014-06-09) (CONF:4515-15915). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration(Medication Activity) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )1098-7513: SHOULD contain zero or one [0..1] effectiveTime (CONF:1098-7513) such that it **SHALL** contain exactly one [1..1] @xsi:type="PIVL_TS" or "EIVL_TS" (CONF:1098-28499). ( effectiveTime.ofType(CDA.PIVL_TS).exists() or effectiveTime.ofType(CDA.EIVL_TS).exists() )should-routeCode: SHOULD contain routeCode ( routeCode.exists() )dose-unit-or-admin-unit: If doseQuantity/@unit is present, then administrationUnitCode SHALL NOT be present. ( doseQuantity.unit.exists() implies administrationUnitCode.empty() )should-author: SHOULD contain author ( author.exists() ) |
702. Procedure.entryRelationship:medication.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
704. Procedure.entryRelationship:reaction | |
Slice Name | reaction |
Short | entryRelationship |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32473) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
706. Procedure.entryRelationship:reaction.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
708. Procedure.entryRelationship:reaction.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
710. Procedure.entryRelationship:reaction.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
712. Procedure.entryRelationship:reaction.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
714. Procedure.entryRelationship:reaction.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
716. Procedure.entryRelationship:reaction.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
718. Procedure.entryRelationship:reaction.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
720. Procedure.entryRelationship:reaction.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
722. Procedure.entryRelationship:reaction.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
724. Procedure.entryRelationship:reaction.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has Component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32474). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | COMP |
726. Procedure.entryRelationship:reaction.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
728. Procedure.entryRelationship:reaction.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
730. Procedure.entryRelationship:reaction.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
732. Procedure.entryRelationship:reaction.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
734. Procedure.entryRelationship:reaction.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
736. Procedure.entryRelationship:reaction.act | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
738. Procedure.entryRelationship:reaction.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
740. Procedure.entryRelationship:reaction.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Reaction Observation (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.9:2014-06-09) (CONF:4515-32475). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Reaction Observation) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() )should-effectiveTime: SHOULD contain effectiveTime ( effectiveTime.exists() ) |
742. Procedure.entryRelationship:reaction.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
744. Procedure.entryRelationship:reaction.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
746. Procedure.entryRelationship:reaction.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
748. Procedure.entryRelationship:reaction.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
750. Procedure.entryRelationship:reaction.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
752. Procedure.entryRelationship:reaction.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
754. Procedure.entryRelationship:assessmentScaleObs | |
Slice Name | assessmentScaleObs |
Short | When an Assessment Scale Observation is contained in a Procedure Template instance that is a Social Determinant of Health intervention procedure, that Assessment scale **MAY** contain Assessment Scale observations that represent LOINC question and answer pairs from SDOH screening instruments. |
Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-32985) such that it |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
756. Procedure.entryRelationship:assessmentScaleObs.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
758. Procedure.entryRelationship:assessmentScaleObs.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
760. Procedure.entryRelationship:assessmentScaleObs.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
762. Procedure.entryRelationship:assessmentScaleObs.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
764. Procedure.entryRelationship:assessmentScaleObs.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
766. Procedure.entryRelationship:assessmentScaleObs.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
768. Procedure.entryRelationship:assessmentScaleObs.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
770. Procedure.entryRelationship:assessmentScaleObs.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
772. Procedure.entryRelationship:assessmentScaleObs.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
774. Procedure.entryRelationship:assessmentScaleObs.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32987). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
776. Procedure.entryRelationship:assessmentScaleObs.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
778. Procedure.entryRelationship:assessmentScaleObs.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
780. Procedure.entryRelationship:assessmentScaleObs.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
782. Procedure.entryRelationship:assessmentScaleObs.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
784. Procedure.entryRelationship:assessmentScaleObs.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
786. Procedure.entryRelationship:assessmentScaleObs.act | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
788. Procedure.entryRelationship:assessmentScaleObs.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
790. Procedure.entryRelationship:assessmentScaleObs.observation | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Assessment Scale Observation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.69) (CONF:4515-32986). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Assessment Scale Observation) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
792. Procedure.entryRelationship:assessmentScaleObs.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
794. Procedure.entryRelationship:assessmentScaleObs.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
796. Procedure.entryRelationship:assessmentScaleObs.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
798. Procedure.entryRelationship:assessmentScaleObs.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
800. Procedure.entryRelationship:assessmentScaleObs.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
802. Procedure.entryRelationship:assessmentScaleObs.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
804. Procedure.entryRelationship:entryReference | |
Slice Name | entryReference |
Short | When an Entry Reference Template is contained in a Procedure Template instance that is a Social Determinant of Health procedure, that Entry Reference **MAY** refer to Assessment Scale Observation in the same document that represent LOINC question and answer pairs from SDOH screening instruments. |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
806. Procedure.entryRelationship:entryReference.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
808. Procedure.entryRelationship:entryReference.realmCode | |
Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
810. Procedure.entryRelationship:entryReference.typeId | |
Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
812. Procedure.entryRelationship:entryReference.typeId.nullFlavor | |
Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
Control | 0..1 |
Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Exceptional Value Detail |
814. Procedure.entryRelationship:entryReference.typeId.assigningAuthorityName | |
Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
Control | 0..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Assigning Authority Name |
816. Procedure.entryRelationship:entryReference.typeId.displayable | |
Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Displayable |
818. Procedure.entryRelationship:entryReference.typeId.root | |
Definition | Identifies the type as an HL7 Registered model |
Control | 1..1 |
Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Root |
Fixed Value | 2.16.840.1.113883.1.3 |
820. Procedure.entryRelationship:entryReference.typeId.extension | |
Definition | A character string as a unique identifier within the scope of the identifier root. |
Control | 1..1 |
Type | string(st: Character String) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Label | Extension |
822. Procedure.entryRelationship:entryReference.templateId | |
Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
824. Procedure.entryRelationship:entryReference.typeCode | |
Comments | SHALL contain exactly one [1..1] @typeCode="RSON" Has reason (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32990). |
Control | 1..1 |
Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship ) |
Type | code(cs: Coded Simple Value) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Fixed Value | RSON |
826. Procedure.entryRelationship:entryReference.inversionInd | |
Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
828. Procedure.entryRelationship:entryReference.contextConductionInd | |
Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
Default Value | true |
830. Procedure.entryRelationship:entryReference.negationInd | |
Control | 0..1 |
Type | boolean(bl: Boolean) |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
XML Format | In the XML format, this property is represented as an attribute. |
832. Procedure.entryRelationship:entryReference.sequenceNumber | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
834. Procedure.entryRelationship:entryReference.seperatableInd | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
836. Procedure.entryRelationship:entryReference.act | |
Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
Short | Base for all types and resources |
Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32989). |
Control | 1..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
Is Modifier | false |
Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists() ) |
838. Procedure.entryRelationship:entryReference.encounter | |
Control | 0..0 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
840. Procedure.entryRelationship:entryReference.observation | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
842. Procedure.entryRelationship:entryReference.observationMedia | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
844. Procedure.entryRelationship:entryReference.organizer | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
846. Procedure.entryRelationship:entryReference.procedure | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
848. Procedure.entryRelationship:entryReference.regionOfInterest | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
850. Procedure.entryRelationship:entryReference.substanceAdministration | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
852. Procedure.entryRelationship:entryReference.supply | |
Control | 0..1 |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
854. Procedure.reference | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
856. Procedure.precondition | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition |
858. Procedure.sdtcPrecondition2 | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition2 |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameprecondition2 . |
860. Procedure.sdtcInFulfillmentOf1 | |
Control | 0..* |
Type | http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1 |
XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc .In the XML format, this property has the actual nameinFulfillmentOf1 . |