A record of a request for a medication, substance or device used in the healthcare setting.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

An Extension

R5: SupplyRequest.basedOn (new:Reference(Resource))

Element SupplyRequest.basedOn has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.basedOn has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.deliverFor (new:Reference(Patient))

Element SupplyRequest.deliverFor has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.deliverFor has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.item additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Medication), CodeableReference(http://hl7.org/fhir/StructureDefinition/Substance), CodeableReference(http://hl7.org/fhir/StructureDefinition/Device), CodeableReference(http://hl7.org/fhir/StructureDefinition/DeviceDefinition), CodeableReference(http://hl7.org/fhir/StructureDefinition/BiologicallyDerivedProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/NutritionProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/InventoryItem))

Element SupplyRequest.item is mapped to FHIR R4B element SupplyRequest.item[x] as SourceIsBroaderThanTarget. The mappings for SupplyRequest.item do not cover the following types: CodeableReference. The target context SupplyRequest.item[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element SupplyRequest. Note that there's a difference between a prescription - an instruction to take a medication, along with a (sometimes) implicit supply, and an explicit request to supply, with no explicit instructions.

R5: SupplyRequest.reason additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Condition), CodeableReference(http://hl7.org/fhir/StructureDefinition/Observation), CodeableReference(http://hl7.org/fhir/StructureDefinition/DiagnosticReport), CodeableReference(http://hl7.org/fhir/StructureDefinition/DocumentReference))

Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonCode as SourceIsBroaderThanTarget. Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonReference as SourceIsBroaderThanTarget. The mappings for SupplyRequest.reason do not cover the following types: CodeableReference.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Status of the supply request.

Status of the supply request.

The item that is requested to be supplied. This is either a link to a resource representing the details of the item or a code that identifies the item from a known list.

Note that there's a difference between a prescription - an instruction to take a medication, along with a (sometimes) implicit supply, and an explicit request to supply, with no explicit instructions.

The item that was requested.

The amount that is being ordered of the indicated item.

R5: SupplyRequest.basedOn (new:Reference(Resource))

Element SupplyRequest.basedOn has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.basedOn has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.deliverFor (new:Reference(Patient))

Element SupplyRequest.deliverFor has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.deliverFor has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.item additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Medication), CodeableReference(http://hl7.org/fhir/StructureDefinition/Substance), CodeableReference(http://hl7.org/fhir/StructureDefinition/Device), CodeableReference(http://hl7.org/fhir/StructureDefinition/DeviceDefinition), CodeableReference(http://hl7.org/fhir/StructureDefinition/BiologicallyDerivedProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/NutritionProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/InventoryItem))

Element SupplyRequest.item is mapped to FHIR R4B element SupplyRequest.item[x] as SourceIsBroaderThanTarget. The mappings for SupplyRequest.item do not cover the following types: CodeableReference. The target context SupplyRequest.item[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element SupplyRequest. Note that there's a difference between a prescription - an instruction to take a medication, along with a (sometimes) implicit supply, and an explicit request to supply, with no explicit instructions.

R5: SupplyRequest.reason additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Condition), CodeableReference(http://hl7.org/fhir/StructureDefinition/Observation), CodeableReference(http://hl7.org/fhir/StructureDefinition/DiagnosticReport), CodeableReference(http://hl7.org/fhir/StructureDefinition/DocumentReference))

Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonCode as SourceIsBroaderThanTarget. Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonReference as SourceIsBroaderThanTarget. The mappings for SupplyRequest.reason do not cover the following types: CodeableReference.

R5: SupplyRequest.requester

Element SupplyRequest.requester is mapped to FHIR R4B element SupplyRequest.requester as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element SupplyRequest.requester with unmapped reference targets: CareTeam.

R5: SupplyRequest.deliverTo

Element SupplyRequest.deliverTo is mapped to FHIR R4B element SupplyRequest.deliverTo as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element SupplyRequest.deliverTo with unmapped reference targets: RelatedPerson.

A record of a request for a medication, substance or device used in the healthcare setting.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

An Extension

R5: SupplyRequest.basedOn (new:Reference(Resource))

Element SupplyRequest.basedOn has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.basedOn has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.deliverFor (new:Reference(Patient))

Element SupplyRequest.deliverFor has a context of SupplyRequest based on following the parent source element upwards and mapping to SupplyRequest. Element SupplyRequest.deliverFor has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: SupplyRequest.item additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Medication), CodeableReference(http://hl7.org/fhir/StructureDefinition/Substance), CodeableReference(http://hl7.org/fhir/StructureDefinition/Device), CodeableReference(http://hl7.org/fhir/StructureDefinition/DeviceDefinition), CodeableReference(http://hl7.org/fhir/StructureDefinition/BiologicallyDerivedProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/NutritionProduct), CodeableReference(http://hl7.org/fhir/StructureDefinition/InventoryItem))

Element SupplyRequest.item is mapped to FHIR R4B element SupplyRequest.item[x] as SourceIsBroaderThanTarget. The mappings for SupplyRequest.item do not cover the following types: CodeableReference. The target context SupplyRequest.item[x] is a choice-type element and cannot directly hold extensions. The context is moved up to parent element SupplyRequest. Note that there's a difference between a prescription - an instruction to take a medication, along with a (sometimes) implicit supply, and an explicit request to supply, with no explicit instructions.

R5: SupplyRequest.reason additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Condition), CodeableReference(http://hl7.org/fhir/StructureDefinition/Observation), CodeableReference(http://hl7.org/fhir/StructureDefinition/DiagnosticReport), CodeableReference(http://hl7.org/fhir/StructureDefinition/DocumentReference))

Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonCode as SourceIsBroaderThanTarget. Element SupplyRequest.reason is mapped to FHIR R4B element SupplyRequest.reasonReference as SourceIsBroaderThanTarget. The mappings for SupplyRequest.reason do not cover the following types: CodeableReference.

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Business identifiers assigned to this SupplyRequest by the author and/or other systems. These identifiers remain constant as the resource is updated and propagates from server to server.

The identifier.type element is used to distinguish between the identifiers assigned by the requester/placer and the performer/filler.

Allows identification of the request as it is known by various participating systems and in a way that remains consistent across servers.

Status of the supply request.

Status of the supply request.

Category of supply, e.g. central, non-stock, etc. This is used to support work flows associated with the supply process.

Category of supply request.

Indicates how quickly this SupplyRequest should be addressed with respect to other requests.

Identifies the level of importance to be assigned to actioning the request.

The item that is requested to be supplied. This is either a link to a resource representing the details of the item or a code that identifies the item from a known list.

Note that there's a difference between a prescription - an instruction to take a medication, along with a (sometimes) implicit supply, and an explicit request to supply, with no explicit instructions.

The item that was requested.

The amount that is being ordered of the indicated item.

Specific parameters for the ordered item. For example, the size of the indicated item.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

A code or string that identifies the device detail being asserted.

A code that identifies the device detail.

The value of the device detail.

Range means device should have a value that falls somewhere within the specified range.

When the request should be fulfilled.

When the request was made.

The device, practitioner, etc. who initiated the request.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: SupplyRequest.requester

Element SupplyRequest.requester is mapped to FHIR R4B element SupplyRequest.requester as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element SupplyRequest.requester with unmapped reference targets: CareTeam.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Who is intended to fulfill the request.

The reason why the supply item was requested.

The reason why the supply item was requested.

The reason why the supply item was requested.

Where the supply is expected to come from.

Where the supply is destined to go.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: SupplyRequest.deliverTo

Element SupplyRequest.deliverTo is mapped to FHIR R4B element SupplyRequest.deliverTo as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element SupplyRequest.deliverTo with unmapped reference targets: RelatedPerson.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.