Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions

Extension: ExtensionSubstancePolymer_Repeat

Official URL: http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat Version: 0.1.0
Standards status: Trial-use Maturity Level: 0 Computable Name: ExtensionSubstancePolymer_Repeat

R5: SubstancePolymer.repeat (new:BackboneElement)

This extension is part of the cross-version definitions generated to enable use of the element SubstancePolymer.repeat as defined in FHIR R5 in FHIR R4.

The source element is defined as: SubstancePolymer.repeat 0..* BackboneElement

Across FHIR versions, the element set has been mapped as:

  • R5 SubstancePolymer.repeat 0..* BackboneElement

Following are the generation technical comments: Element SubstancePolymer.repeat is not mapped to FHIR R4, since FHIR R5 SubstancePolymer is not mapped. Element SubstancePolymer.repeat has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Context of Use

    This extension may be used on the following element(s)

    This extension is allowed for use with FHIR versions R4 to R4 .

Usage info

Usages:

You can also check for usages in the FHIR IG Statistics

Formal Views of Extension Content

Description of Profiles, Differentials, Snapshots, and how the XML and JSON presentations work.

This structure is derived from Extension

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Extension 0..* Extension(4.0.1) R5: Specifies and quantifies the repeated units and their configuration (new)
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
.... extension:averageMolecularFormula 0..1 Extension R5: A representation of an (average) molecular formula from a polymer (new)
..... url 1..1 uri "averageMolecularFormula"
..... value[x] 0..1 string A representation of an (average) molecular formula from a polymer
.... extension:repeatUnitAmountType 0..1 Extension R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
..... url 1..1 uri "repeatUnitAmountType"
..... value[x] 0..1 CodeableConcept How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
.... extension:repeatUnit 0..* Extension R5: An SRU - Structural Repeat Unit (new)
..... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
...... extension:unit 0..1 Extension R5: Structural repeat units are essential elements for defining polymers (new)
....... url 1..1 uri "unit"
....... value[x] 0..1 string Structural repeat units are essential elements for defining polymers
...... extension:orientation 0..1 Extension R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
....... url 1..1 uri "orientation"
....... value[x] 0..1 CodeableConcept The orientation of the polymerisation, e.g. head-tail, head-head, random
...... extension:amount 0..1 Extension R5: Number of repeats of this unit (new)
....... url 1..1 uri "amount"
....... value[x] 0..1 integer Number of repeats of this unit
...... extension:degreeOfPolymerisation 0..* Extension R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
........ extension:type 0..1 Extension R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
........ extension:average 0..1 Extension R5: An average amount of polymerisation (new)
......... url 1..1 uri "average"
......... value[x] 0..1 integer An average amount of polymerisation
........ extension:low 0..1 Extension R5: A low expected limit of the amount (new)
......... url 1..1 uri "low"
......... value[x] 0..1 integer A low expected limit of the amount
........ extension:high 0..1 Extension R5: A high expected limit of the amount (new)
......... url 1..1 uri "high"
......... value[x] 0..1 integer A high expected limit of the amount
....... url 1..1 uri "degreeOfPolymerisation"
....... value[x] 0..0 Value of extension
...... extension:structuralRepresentation 0..* Extension R5: A graphical structure for this SRU (new)
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
........ extension:type 0..1 Extension R5: The type of structure (e.g. Full, Partial, Representative) (new)
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of structure (e.g. Full, Partial, Representative)
........ extension:representation 0..1 Extension R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
......... url 1..1 uri "representation"
......... value[x] 0..1 string The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:format 0..1 Extension R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
......... url 1..1 uri "format"
......... value[x] 0..1 CodeableConcept The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:attachment 0..1 Extension R5: An attached file with the structural representation (new)
......... url 1..1 uri "attachment"
......... value[x] 0..1 Attachment An attached file with the structural representation
....... url 1..1 uri "structuralRepresentation"
....... value[x] 0..0 Value of extension
..... url 1..1 uri "repeatUnit"
..... value[x] 0..0 Value of extension
... url 1..1 uri "http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat"
... value[x] 0..0 Value of extension

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Extension 0..* Extension(4.0.1) R5: Specifies and quantifies the repeated units and their configuration (new)
Constraints: ext-1
... id 0..1 string Unique id for inter-element referencing
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
.... extension:averageMolecularFormula 0..1 Extension R5: A representation of an (average) molecular formula from a polymer (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
..... url 1..1 uri "averageMolecularFormula"
..... value[x] 0..1 string A representation of an (average) molecular formula from a polymer
.... extension:repeatUnitAmountType 0..1 Extension R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
..... url 1..1 uri "repeatUnitAmountType"
..... value[x] 0..1 CodeableConcept How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
.... extension:repeatUnit 0..* Extension R5: An SRU - Structural Repeat Unit (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
...... extension:unit 0..1 Extension R5: Structural repeat units are essential elements for defining polymers (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "unit"
....... value[x] 0..1 string Structural repeat units are essential elements for defining polymers
...... extension:orientation 0..1 Extension R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "orientation"
....... value[x] 0..1 CodeableConcept The orientation of the polymerisation, e.g. head-tail, head-head, random
...... extension:amount 0..1 Extension R5: Number of repeats of this unit (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "amount"
....... value[x] 0..1 integer Number of repeats of this unit
...... extension:degreeOfPolymerisation 0..* Extension R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
........ extension:type 0..1 Extension R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
........ extension:average 0..1 Extension R5: An average amount of polymerisation (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "average"
......... value[x] 0..1 integer An average amount of polymerisation
........ extension:low 0..1 Extension R5: A low expected limit of the amount (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "low"
......... value[x] 0..1 integer A low expected limit of the amount
........ extension:high 0..1 Extension R5: A high expected limit of the amount (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "high"
......... value[x] 0..1 integer A high expected limit of the amount
....... url 1..1 uri "degreeOfPolymerisation"
...... extension:structuralRepresentation 0..* Extension R5: A graphical structure for this SRU (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
........ extension:type 0..1 Extension R5: The type of structure (e.g. Full, Partial, Representative) (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of structure (e.g. Full, Partial, Representative)
........ extension:representation 0..1 Extension R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "representation"
......... value[x] 0..1 string The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:format 0..1 Extension R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "format"
......... value[x] 0..1 CodeableConcept The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:attachment 0..1 Extension R5: An attached file with the structural representation (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "attachment"
......... value[x] 0..1 Attachment An attached file with the structural representation
....... url 1..1 uri "structuralRepresentation"
..... url 1..1 uri "repeatUnit"
... url 1..1 uri "http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat"

doco Documentation for this format

This structure is derived from Extension

Summary

Complex Extension: R5: SubstancePolymer.repeat (new:BackboneElement)

  • averageMolecularFormula: string: R5: SubstancePolymer.repeat.averageMolecularFormula (new:string)
  • repeatUnitAmountType: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnitAmountType (new:CodeableConcept)
  • unit: string: R5: SubstancePolymer.repeat.repeatUnit.unit (new:string)
  • orientation: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.orientation (new:CodeableConcept)
  • amount: integer: R5: SubstancePolymer.repeat.repeatUnit.amount (new:integer)
  • type: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type (new:CodeableConcept)
  • average: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average (new:integer)
  • low: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low (new:integer)
  • high: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high (new:integer)
  • type: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type (new:CodeableConcept)
  • representation: string: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation (new:string)
  • format: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format (new:CodeableConcept)
  • attachment: Attachment: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment (new:Attachment)

Maturity: 0

Differential View

This structure is derived from Extension

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Extension 0..* Extension(4.0.1) R5: Specifies and quantifies the repeated units and their configuration (new)
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
.... extension:averageMolecularFormula 0..1 Extension R5: A representation of an (average) molecular formula from a polymer (new)
..... url 1..1 uri "averageMolecularFormula"
..... value[x] 0..1 string A representation of an (average) molecular formula from a polymer
.... extension:repeatUnitAmountType 0..1 Extension R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
..... url 1..1 uri "repeatUnitAmountType"
..... value[x] 0..1 CodeableConcept How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
.... extension:repeatUnit 0..* Extension R5: An SRU - Structural Repeat Unit (new)
..... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
...... extension:unit 0..1 Extension R5: Structural repeat units are essential elements for defining polymers (new)
....... url 1..1 uri "unit"
....... value[x] 0..1 string Structural repeat units are essential elements for defining polymers
...... extension:orientation 0..1 Extension R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
....... url 1..1 uri "orientation"
....... value[x] 0..1 CodeableConcept The orientation of the polymerisation, e.g. head-tail, head-head, random
...... extension:amount 0..1 Extension R5: Number of repeats of this unit (new)
....... url 1..1 uri "amount"
....... value[x] 0..1 integer Number of repeats of this unit
...... extension:degreeOfPolymerisation 0..* Extension R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
........ extension:type 0..1 Extension R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
........ extension:average 0..1 Extension R5: An average amount of polymerisation (new)
......... url 1..1 uri "average"
......... value[x] 0..1 integer An average amount of polymerisation
........ extension:low 0..1 Extension R5: A low expected limit of the amount (new)
......... url 1..1 uri "low"
......... value[x] 0..1 integer A low expected limit of the amount
........ extension:high 0..1 Extension R5: A high expected limit of the amount (new)
......... url 1..1 uri "high"
......... value[x] 0..1 integer A high expected limit of the amount
....... url 1..1 uri "degreeOfPolymerisation"
....... value[x] 0..0 Value of extension
...... extension:structuralRepresentation 0..* Extension R5: A graphical structure for this SRU (new)
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
........ extension:type 0..1 Extension R5: The type of structure (e.g. Full, Partial, Representative) (new)
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of structure (e.g. Full, Partial, Representative)
........ extension:representation 0..1 Extension R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
......... url 1..1 uri "representation"
......... value[x] 0..1 string The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:format 0..1 Extension R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
......... url 1..1 uri "format"
......... value[x] 0..1 CodeableConcept The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:attachment 0..1 Extension R5: An attached file with the structural representation (new)
......... url 1..1 uri "attachment"
......... value[x] 0..1 Attachment An attached file with the structural representation
....... url 1..1 uri "structuralRepresentation"
....... value[x] 0..0 Value of extension
..... url 1..1 uri "repeatUnit"
..... value[x] 0..0 Value of extension
... url 1..1 uri "http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat"
... value[x] 0..0 Value of extension

doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Extension 0..* Extension(4.0.1) R5: Specifies and quantifies the repeated units and their configuration (new)
Constraints: ext-1
... id 0..1 string Unique id for inter-element referencing
... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
.... extension:averageMolecularFormula 0..1 Extension R5: A representation of an (average) molecular formula from a polymer (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
..... url 1..1 uri "averageMolecularFormula"
..... value[x] 0..1 string A representation of an (average) molecular formula from a polymer
.... extension:repeatUnitAmountType 0..1 Extension R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
..... url 1..1 uri "repeatUnitAmountType"
..... value[x] 0..1 CodeableConcept How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
.... extension:repeatUnit 0..* Extension R5: An SRU - Structural Repeat Unit (new)
Constraints: ext-1
..... id 0..1 string Unique id for inter-element referencing
..... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
...... extension:unit 0..1 Extension R5: Structural repeat units are essential elements for defining polymers (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "unit"
....... value[x] 0..1 string Structural repeat units are essential elements for defining polymers
...... extension:orientation 0..1 Extension R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "orientation"
....... value[x] 0..1 CodeableConcept The orientation of the polymerisation, e.g. head-tail, head-head, random
...... extension:amount 0..1 Extension R5: Number of repeats of this unit (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
....... url 1..1 uri "amount"
....... value[x] 0..1 integer Number of repeats of this unit
...... extension:degreeOfPolymerisation 0..* Extension R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
........ extension:type 0..1 Extension R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
........ extension:average 0..1 Extension R5: An average amount of polymerisation (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "average"
......... value[x] 0..1 integer An average amount of polymerisation
........ extension:low 0..1 Extension R5: A low expected limit of the amount (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "low"
......... value[x] 0..1 integer A low expected limit of the amount
........ extension:high 0..1 Extension R5: A high expected limit of the amount (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "high"
......... value[x] 0..1 integer A high expected limit of the amount
....... url 1..1 uri "degreeOfPolymerisation"
...... extension:structuralRepresentation 0..* Extension R5: A graphical structure for this SRU (new)
Constraints: ext-1
....... id 0..1 string Unique id for inter-element referencing
....... Slices for extension 0..* Extension Extension
Slice: Unordered, Open by value:url
Constraints: ext-1
........ extension:type 0..1 Extension R5: The type of structure (e.g. Full, Partial, Representative) (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "type"
......... value[x] 0..1 CodeableConcept The type of structure (e.g. Full, Partial, Representative)
........ extension:representation 0..1 Extension R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "representation"
......... value[x] 0..1 string The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:format 0..1 Extension R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "format"
......... value[x] 0..1 CodeableConcept The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
........ extension:attachment 0..1 Extension R5: An attached file with the structural representation (new)
Constraints: ext-1
......... id 0..1 string Unique id for inter-element referencing
......... extension 0..* Extension Additional content defined by implementations
Slice: Unordered, Open by value:url
Constraints: ext-1
......... url 1..1 uri "attachment"
......... value[x] 0..1 Attachment An attached file with the structural representation
....... url 1..1 uri "structuralRepresentation"
..... url 1..1 uri "repeatUnit"
... url 1..1 uri "http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat"

doco Documentation for this format

This structure is derived from Extension

Summary

Complex Extension: R5: SubstancePolymer.repeat (new:BackboneElement)

  • averageMolecularFormula: string: R5: SubstancePolymer.repeat.averageMolecularFormula (new:string)
  • repeatUnitAmountType: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnitAmountType (new:CodeableConcept)
  • unit: string: R5: SubstancePolymer.repeat.repeatUnit.unit (new:string)
  • orientation: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.orientation (new:CodeableConcept)
  • amount: integer: R5: SubstancePolymer.repeat.repeatUnit.amount (new:integer)
  • type: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type (new:CodeableConcept)
  • average: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average (new:integer)
  • low: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low (new:integer)
  • high: integer: R5: SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high (new:integer)
  • type: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type (new:CodeableConcept)
  • representation: string: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation (new:string)
  • format: CodeableConcept: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format (new:CodeableConcept)
  • attachment: Attachment: R5: SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment (new:Attachment)

Maturity: 0

 

Other representations of profile: CSV, Excel, Schematron

Constraints

Id Grade Path(s) Description Expression
ele-1 error Extension, Extension.extension, Extension.extension:averageMolecularFormula, Extension.extension:averageMolecularFormula.extension, Extension.extension:averageMolecularFormula.value[x], Extension.extension:repeatUnitAmountType, Extension.extension:repeatUnitAmountType.extension, Extension.extension:repeatUnitAmountType.value[x], Extension.extension:repeatUnit, Extension.extension:repeatUnit.extension, Extension.extension:repeatUnit.extension:unit, Extension.extension:repeatUnit.extension:unit.extension, Extension.extension:repeatUnit.extension:unit.value[x], Extension.extension:repeatUnit.extension:orientation, Extension.extension:repeatUnit.extension:orientation.extension, Extension.extension:repeatUnit.extension:orientation.value[x], Extension.extension:repeatUnit.extension:amount, Extension.extension:repeatUnit.extension:amount.extension, Extension.extension:repeatUnit.extension:amount.value[x], Extension.extension:repeatUnit.extension:degreeOfPolymerisation, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.value[x], Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.value[x], Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.value[x], Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.value[x], Extension.extension:repeatUnit.extension:structuralRepresentation, Extension.extension:repeatUnit.extension:structuralRepresentation.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x], Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x], Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.value[x], Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x] All FHIR elements must have a @value or children hasValue() or (children().count() > id.count())
ext-1 error Extension, Extension.extension, Extension.extension:averageMolecularFormula, Extension.extension:averageMolecularFormula.extension, Extension.extension:repeatUnitAmountType, Extension.extension:repeatUnitAmountType.extension, Extension.extension:repeatUnit, Extension.extension:repeatUnit.extension, Extension.extension:repeatUnit.extension:unit, Extension.extension:repeatUnit.extension:unit.extension, Extension.extension:repeatUnit.extension:orientation, Extension.extension:repeatUnit.extension:orientation.extension, Extension.extension:repeatUnit.extension:amount, Extension.extension:repeatUnit.extension:amount.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.extension, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high, Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.extension, Extension.extension:repeatUnit.extension:structuralRepresentation, Extension.extension:repeatUnit.extension:structuralRepresentation.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.extension, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment, Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.extension Must have either extensions or value[x], not both extension.exists() != value.exists()