Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the ext-R5-SubstancePolymer.repeat extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: Optional Extension Element - found in all resources. |
| Short | R5: Specifies and quantifies the repeated units and their configuration (new)Optional Extensions Element |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:averageMolecularFormula | |
| Slice Name | averageMolecularFormula |
| Definition | R5: |
| Short | R5: A representation of an (average) molecular formula from a polymer (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:averageMolecularFormula.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | averageMolecularFormula |
| 8. Extension.extension:averageMolecularFormula.value[x] | |
| Definition | A representation of an (average) molecular formula from a polymer. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A representation of an (average) molecular formula from a polymerValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:repeatUnitAmountType | |
| Slice Name | repeatUnitAmountType |
| Definition | R5: |
| Short | R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:repeatUnitAmountType.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | repeatUnitAmountType |
| 14. Extension.extension:repeatUnitAmountType.value[x] | |
| Definition | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)Value of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:repeatUnit | |
| Slice Name | repeatUnit |
| Definition | R5: |
| Short | R5: An SRU - Structural Repeat Unit (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 18. Extension.extension:repeatUnit.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Extension.extension:repeatUnit.extension:unit | |
| Slice Name | unit |
| Definition | R5: |
| Short | R5: Structural repeat units are essential elements for defining polymers (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 22. Extension.extension:repeatUnit.extension:unit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | unit |
| 24. Extension.extension:repeatUnit.extension:unit.value[x] | |
| Definition | Structural repeat units are essential elements for defining polymers. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Structural repeat units are essential elements for defining polymersValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:repeatUnit.extension:orientation | |
| Slice Name | orientation |
| Definition | R5: |
| Short | R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 28. Extension.extension:repeatUnit.extension:orientation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | orientation |
| 30. Extension.extension:repeatUnit.extension:orientation.value[x] | |
| Definition | The orientation of the polymerisation, e.g. head-tail, head-head, random. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The orientation of the polymerisation, e.g. head-tail, head-head, randomValue of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 32. Extension.extension:repeatUnit.extension:amount | |
| Slice Name | amount |
| Definition | R5: |
| Short | R5: Number of repeats of this unit (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 34. Extension.extension:repeatUnit.extension:amount.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | amount |
| 36. Extension.extension:repeatUnit.extension:amount.value[x] | |
| Definition | Number of repeats of this unit. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Number of repeats of this unitValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 38. Extension.extension:repeatUnit.extension:degreeOfPolymerisation | |
| Slice Name | degreeOfPolymerisation |
| Definition | R5: |
| Short | R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 40. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 44. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 46. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.value[x] | |
| Definition | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer RatioValue of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 48. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average | |
| Slice Name | average |
| Definition | R5: |
| Short | R5: An average amount of polymerisation (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 50. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | average |
| 52. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.value[x] | |
| Definition | An average amount of polymerisation. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | An average amount of polymerisationValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 54. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low | |
| Slice Name | low |
| Definition | R5: |
| Short | R5: A low expected limit of the amount (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 56. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | low |
| 58. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.value[x] | |
| Definition | A low expected limit of the amount. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A low expected limit of the amountValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 60. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high | |
| Slice Name | high |
| Definition | R5: |
| Short | R5: A high expected limit of the amount (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 62. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | high |
| 64. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.value[x] | |
| Definition | A high expected limit of the amount. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A high expected limit of the amountValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | degreeOfPolymerisation |
| 68. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 70. Extension.extension:repeatUnit.extension:structuralRepresentation | |
| Slice Name | structuralRepresentation |
| Definition | R5: |
| Short | R5: A graphical structure for this SRU (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 72. Extension.extension:repeatUnit.extension:structuralRepresentation.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 74. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of structure (e.g. Full, Partial, Representative) (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 76. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 78. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x] | |
| Definition | The type of structure (e.g. Full, Partial, Representative). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The type of structure (e.g. Full, Partial, Representative)Value of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 80. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation | |
| Slice Name | representation |
| Definition | R5: |
| Short | R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 82. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | representation |
| 84. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x] | |
| Definition | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIFValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format | |
| Slice Name | format |
| Definition | R5: |
| Short | R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 88. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | format |
| 90. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.value[x] | |
| Definition | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIFValue of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 92. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment | |
| Slice Name | attachment |
| Definition | R5: |
| Short | R5: An attached file with the structural representation (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 94. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | attachment |
| 96. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x] | |
| Definition | An attached file with the structural representation. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | An attached file with the structural representationValue of extension |
| Control | 0..1 |
| Type | Attachment, date, Meta, Address, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.extension:repeatUnit.extension:structuralRepresentation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | structuralRepresentation |
| 100. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 102. Extension.extension:repeatUnit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | repeatUnit |
| 104. Extension.extension:repeatUnit.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 106. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat |
| 108. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Specifies and quantifies the repeated units and their configuration (new) |
| Comments | Element |
| Control | 0..* |
| Is Modifier | false |
| 2. Extension.extension | |
| Control | 0..* |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:averageMolecularFormula | |
| Slice Name | averageMolecularFormula |
| Definition | R5: |
| Short | R5: A representation of an (average) molecular formula from a polymer (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 6. Extension.extension:averageMolecularFormula.url | |
| Control | 1..1 |
| Fixed Value | averageMolecularFormula |
| 8. Extension.extension:averageMolecularFormula.value[x] | |
| Definition | A representation of an (average) molecular formula from a polymer. |
| Short | A representation of an (average) molecular formula from a polymer |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:repeatUnitAmountType | |
| Slice Name | repeatUnitAmountType |
| Definition | R5: |
| Short | R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 12. Extension.extension:repeatUnitAmountType.url | |
| Control | 1..1 |
| Fixed Value | repeatUnitAmountType |
| 14. Extension.extension:repeatUnitAmountType.value[x] | |
| Definition | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average). |
| Short | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 16. Extension.extension:repeatUnit | |
| Slice Name | repeatUnit |
| Definition | R5: |
| Short | R5: An SRU - Structural Repeat Unit (new) |
| Comments | Element |
| Control | 0..* |
| Requirements | Element |
| 18. Extension.extension:repeatUnit.extension | |
| Control | 0..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Extension.extension:repeatUnit.extension:unit | |
| Slice Name | unit |
| Definition | R5: |
| Short | R5: Structural repeat units are essential elements for defining polymers (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 22. Extension.extension:repeatUnit.extension:unit.url | |
| Control | 1..1 |
| Fixed Value | unit |
| 24. Extension.extension:repeatUnit.extension:unit.value[x] | |
| Definition | Structural repeat units are essential elements for defining polymers. |
| Short | Structural repeat units are essential elements for defining polymers |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 26. Extension.extension:repeatUnit.extension:orientation | |
| Slice Name | orientation |
| Definition | R5: |
| Short | R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 28. Extension.extension:repeatUnit.extension:orientation.url | |
| Control | 1..1 |
| Fixed Value | orientation |
| 30. Extension.extension:repeatUnit.extension:orientation.value[x] | |
| Definition | The orientation of the polymerisation, e.g. head-tail, head-head, random. |
| Short | The orientation of the polymerisation, e.g. head-tail, head-head, random |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 32. Extension.extension:repeatUnit.extension:amount | |
| Slice Name | amount |
| Definition | R5: |
| Short | R5: Number of repeats of this unit (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 34. Extension.extension:repeatUnit.extension:amount.url | |
| Control | 1..1 |
| Fixed Value | amount |
| 36. Extension.extension:repeatUnit.extension:amount.value[x] | |
| Definition | Number of repeats of this unit. |
| Short | Number of repeats of this unit |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 38. Extension.extension:repeatUnit.extension:degreeOfPolymerisation | |
| Slice Name | degreeOfPolymerisation |
| Definition | R5: |
| Short | R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new) |
| Comments | Element |
| Control | 0..* |
| Requirements | Element |
| 40. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension | |
| Control | 0..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 44. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.url | |
| Control | 1..1 |
| Fixed Value | type |
| 46. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.value[x] | |
| Definition | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio. |
| Short | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 48. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average | |
| Slice Name | average |
| Definition | R5: |
| Short | R5: An average amount of polymerisation (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 50. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.url | |
| Control | 1..1 |
| Fixed Value | average |
| 52. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.value[x] | |
| Definition | An average amount of polymerisation. |
| Short | An average amount of polymerisation |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 54. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low | |
| Slice Name | low |
| Definition | R5: |
| Short | R5: A low expected limit of the amount (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 56. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.url | |
| Control | 1..1 |
| Fixed Value | low |
| 58. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.value[x] | |
| Definition | A low expected limit of the amount. |
| Short | A low expected limit of the amount |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 60. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high | |
| Slice Name | high |
| Definition | R5: |
| Short | R5: A high expected limit of the amount (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 62. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.url | |
| Control | 1..1 |
| Fixed Value | high |
| 64. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.value[x] | |
| Definition | A high expected limit of the amount. |
| Short | A high expected limit of the amount |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 66. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url | |
| Control | 1..1 |
| Fixed Value | degreeOfPolymerisation |
| 68. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x] | |
| Control | 0..0 |
| 70. Extension.extension:repeatUnit.extension:structuralRepresentation | |
| Slice Name | structuralRepresentation |
| Definition | R5: |
| Short | R5: A graphical structure for this SRU (new) |
| Comments | Element |
| Control | 0..* |
| Requirements | Element |
| 72. Extension.extension:repeatUnit.extension:structuralRepresentation.extension | |
| Control | 0..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 74. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of structure (e.g. Full, Partial, Representative) (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 76. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url | |
| Control | 1..1 |
| Fixed Value | type |
| 78. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x] | |
| Definition | The type of structure (e.g. Full, Partial, Representative). |
| Short | The type of structure (e.g. Full, Partial, Representative) |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 80. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation | |
| Slice Name | representation |
| Definition | R5: |
| Short | R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 82. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url | |
| Control | 1..1 |
| Fixed Value | representation |
| 84. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x] | |
| Definition | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. |
| Short | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 86. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format | |
| Slice Name | format |
| Definition | R5: |
| Short | R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 88. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.url | |
| Control | 1..1 |
| Fixed Value | format |
| 90. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.value[x] | |
| Definition | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. |
| Short | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 92. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment | |
| Slice Name | attachment |
| Definition | R5: |
| Short | R5: An attached file with the structural representation (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 94. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url | |
| Control | 1..1 |
| Fixed Value | attachment |
| 96. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x] | |
| Definition | An attached file with the structural representation. |
| Short | An attached file with the structural representation |
| Control | 0..1 |
| Type | Attachment |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 98. Extension.extension:repeatUnit.extension:structuralRepresentation.url | |
| Control | 1..1 |
| Fixed Value | structuralRepresentation |
| 100. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x] | |
| Control | 0..0 |
| 102. Extension.extension:repeatUnit.url | |
| Control | 1..1 |
| Fixed Value | repeatUnit |
| 104. Extension.extension:repeatUnit.value[x] | |
| Control | 0..0 |
| 106. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat |
| 108. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Specifies and quantifies the repeated units and their configuration (new) |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:averageMolecularFormula | |
| Slice Name | averageMolecularFormula |
| Definition | R5: |
| Short | R5: A representation of an (average) molecular formula from a polymer (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:averageMolecularFormula.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:averageMolecularFormula.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:averageMolecularFormula.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | averageMolecularFormula |
| 14. Extension.extension:averageMolecularFormula.value[x] | |
| Definition | A representation of an (average) molecular formula from a polymer. |
| Short | A representation of an (average) molecular formula from a polymer |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:repeatUnitAmountType | |
| Slice Name | repeatUnitAmountType |
| Definition | R5: |
| Short | R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:repeatUnitAmountType.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:repeatUnitAmountType.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:repeatUnitAmountType.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | repeatUnitAmountType |
| 24. Extension.extension:repeatUnitAmountType.value[x] | |
| Definition | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average). |
| Short | How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:repeatUnit | |
| Slice Name | repeatUnit |
| Definition | R5: |
| Short | R5: An SRU - Structural Repeat Unit (new) |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:repeatUnit.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:repeatUnit.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:repeatUnit.extension:unit | |
| Slice Name | unit |
| Definition | R5: |
| Short | R5: Structural repeat units are essential elements for defining polymers (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 34. Extension.extension:repeatUnit.extension:unit.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 36. Extension.extension:repeatUnit.extension:unit.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 38. Extension.extension:repeatUnit.extension:unit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | unit |
| 40. Extension.extension:repeatUnit.extension:unit.value[x] | |
| Definition | Structural repeat units are essential elements for defining polymers. |
| Short | Structural repeat units are essential elements for defining polymers |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 42. Extension.extension:repeatUnit.extension:orientation | |
| Slice Name | orientation |
| Definition | R5: |
| Short | R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 44. Extension.extension:repeatUnit.extension:orientation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 46. Extension.extension:repeatUnit.extension:orientation.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 48. Extension.extension:repeatUnit.extension:orientation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | orientation |
| 50. Extension.extension:repeatUnit.extension:orientation.value[x] | |
| Definition | The orientation of the polymerisation, e.g. head-tail, head-head, random. |
| Short | The orientation of the polymerisation, e.g. head-tail, head-head, random |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:repeatUnit.extension:amount | |
| Slice Name | amount |
| Definition | R5: |
| Short | R5: Number of repeats of this unit (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 54. Extension.extension:repeatUnit.extension:amount.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 56. Extension.extension:repeatUnit.extension:amount.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 58. Extension.extension:repeatUnit.extension:amount.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | amount |
| 60. Extension.extension:repeatUnit.extension:amount.value[x] | |
| Definition | Number of repeats of this unit. |
| Short | Number of repeats of this unit |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Extension.extension:repeatUnit.extension:degreeOfPolymerisation | |
| Slice Name | degreeOfPolymerisation |
| Definition | R5: |
| Short | R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new) |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 64. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 66. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 68. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 70. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 72. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 74. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 76. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:type.value[x] | |
| Definition | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio. |
| Short | The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 78. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average | |
| Slice Name | average |
| Definition | R5: |
| Short | R5: An average amount of polymerisation (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 80. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 82. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 84. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | average |
| 86. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:average.value[x] | |
| Definition | An average amount of polymerisation. |
| Short | An average amount of polymerisation |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 88. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low | |
| Slice Name | low |
| Definition | R5: |
| Short | R5: A low expected limit of the amount (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 90. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 92. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 94. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | low |
| 96. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:low.value[x] | |
| Definition | A low expected limit of the amount. |
| Short | A low expected limit of the amount |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high | |
| Slice Name | high |
| Definition | R5: |
| Short | R5: A high expected limit of the amount (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 100. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 102. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 104. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | high |
| 106. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.extension:high.value[x] | |
| Definition | A high expected limit of the amount. |
| Short | A high expected limit of the amount |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 108. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | degreeOfPolymerisation |
| 110. Extension.extension:repeatUnit.extension:degreeOfPolymerisation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 112. Extension.extension:repeatUnit.extension:structuralRepresentation | |
| Slice Name | structuralRepresentation |
| Definition | R5: |
| Short | R5: A graphical structure for this SRU (new) |
| Comments | Element |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 114. Extension.extension:repeatUnit.extension:structuralRepresentation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 116. Extension.extension:repeatUnit.extension:structuralRepresentation.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 118. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type | |
| Slice Name | type |
| Definition | R5: |
| Short | R5: The type of structure (e.g. Full, Partial, Representative) (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 120. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 122. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 124. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 126. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:type.value[x] | |
| Definition | The type of structure (e.g. Full, Partial, Representative). |
| Short | The type of structure (e.g. Full, Partial, Representative) |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 128. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation | |
| Slice Name | representation |
| Definition | R5: |
| Short | R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 130. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 132. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 134. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | representation |
| 136. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:representation.value[x] | |
| Definition | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. |
| Short | The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 138. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format | |
| Slice Name | format |
| Definition | R5: |
| Short | R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 140. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 142. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 144. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | format |
| 146. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:format.value[x] | |
| Definition | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF. |
| Short | The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 148. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment | |
| Slice Name | attachment |
| Definition | R5: |
| Short | R5: An attached file with the structural representation (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 150. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 152. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 154. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | attachment |
| 156. Extension.extension:repeatUnit.extension:structuralRepresentation.extension:attachment.value[x] | |
| Definition | An attached file with the structural representation. |
| Short | An attached file with the structural representation |
| Control | 0..1 |
| Type | Attachment |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 158. Extension.extension:repeatUnit.extension:structuralRepresentation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | structuralRepresentation |
| 160. Extension.extension:repeatUnit.extension:structuralRepresentation.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 162. Extension.extension:repeatUnit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | repeatUnit |
| 164. Extension.extension:repeatUnit.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 166. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat |
| 168. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r5.r4#0.1.0 based on FHIR 4.0.1. Generated 2026-03-20
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change