This page is part of the Structured Data Capture FHIR IG (v4.0.0-ballot: STU 4 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 3.0.0. For a full list of available versions, see the Directory of published versions
Page standards status: Trial-use | Maturity Level: 4 |
Definitions for the sdc-valueset resource profile.
Guidance on how to interpret the contents of this table can be found here
0. ValueSet | |
Definition | Sets expectations for SDC-conformant systems around value set support for representing permitted question answers. |
2. ValueSet.modifierExtension | |
Slicing | This element introduces a set of slices on ValueSet.modifierExtension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
4. ValueSet.modifierExtension:rendering-criticalExtension | |
Slice Name | rendering-criticalExtension |
Control | 0..* |
Type | Extension(Rendering Critical Extension) (Extension Type: canonical) |
Must Support | true |
6. ValueSet.url | |
Must Support | true |
8. ValueSet.status | |
Must Support | true |
10. ValueSet.experimental | |
Must Support | true |
12. ValueSet.date | |
Must Support | true |
14. ValueSet.description | |
Must Support | true |
16. ValueSet.immutable | |
Control | 1..? |
Must Support | true |
18. ValueSet.compose | |
Must Support | true |
20. ValueSet.compose.lockedDate | |
Must Support | true |
22. ValueSet.compose.inactive | |
Must Support | true |
24. ValueSet.compose.include | |
Must Support | true |
26. ValueSet.compose.include.system | |
Must Support | true |
28. ValueSet.compose.include.version | |
Note | This is a business version Id, not a resource version Id (see discussion) |
Must Support | true |
30. ValueSet.compose.include.concept | |
Must Support | true |
32. ValueSet.compose.include.concept.extension | |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
34. ValueSet.compose.include.concept.extension:conceptLabel | |
Slice Name | conceptLabel |
Control | 0..1 |
Type | Extension(ValueSet Label) (Extension Type: string) |
Must Support | true |
36. ValueSet.compose.include.concept.extension:conceptLabel.value[x] | |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
38. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension | |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
40. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-renderingStyle | |
Slice Name | code-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
42. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-xhtml | |
Slice Name | code-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
44. ValueSet.compose.include.concept.extension:conceptConceptOrder | |
Slice Name | conceptConceptOrder |
Comments | The presence of a sort order implies that sort order is important. |
Control | 0..1 |
Type | Extension(ValueSet Concept Order) (Extension Type: integer) |
Must Support | true |
46. ValueSet.compose.include.concept.code | |
Must Support | true |
48. ValueSet.compose.include.concept.display | |
Must Support | true |
50. ValueSet.compose.include.concept.display.extension | |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
52. ValueSet.compose.include.concept.display.extension:codeDisplay-renderingStyle | |
Slice Name | codeDisplay-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
54. ValueSet.compose.include.concept.display.extension:codeDisplay-xhtml | |
Slice Name | codeDisplay-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
56. ValueSet.compose.include.concept.designation | |
58. ValueSet.compose.include.concept.designation.extension | |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.designation.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
60. ValueSet.compose.include.concept.designation.extension:designation-renderingStyle | |
Slice Name | designation-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
62. ValueSet.compose.include.concept.designation.extension:designation-xhtml | |
Slice Name | designation-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
64. ValueSet.compose.include.filter | |
Must Support | true |
66. ValueSet.compose.include.filter.property | |
Must Support | true |
68. ValueSet.compose.include.filter.op | |
Must Support | true |
70. ValueSet.compose.include.filter.value | |
Must Support | true |
72. ValueSet.compose.include.valueSet | |
Must Support | true |
74. ValueSet.compose.exclude | |
Must Support | true |
76. ValueSet.expansion | |
Must Support | true |
78. ValueSet.expansion.extension | |
Slicing | This element introduces a set of slices on ValueSet.expansion.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
80. ValueSet.expansion.extension:expansionSource | |
Slice Name | expansionSource |
Control | 0..1 |
Type | Extension(ValueSet Expansion Source) (Extension Type: uri) |
82. ValueSet.expansion.extension:expansionProperty | |
Slice Name | expansionProperty |
Control | 0..* |
Type | Extension(Extension Definition for ValueSet.expansion.property for Version 5.0) (Complex Extension) |
Must Support | true |
Requirements | ... Allows support for itemWeight and other key properties |
84. ValueSet.expansion.identifier | |
Note | This is a business identifier, not a resource identifier (see discussion) |
Must Support | true |
86. ValueSet.expansion.timestamp | |
Must Support | true |
88. ValueSet.expansion.contains | |
Must Support | true |
90. ValueSet.expansion.contains.extension | |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
92. ValueSet.expansion.contains.extension:expansionLabel | |
Slice Name | expansionLabel |
Control | 0..1 |
Type | Extension(ValueSet Label) (Extension Type: string) |
Must Support | true |
94. ValueSet.expansion.contains.extension:expansionLabel.value[x] | |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
96. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension | |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
98. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-renderingStyle | |
Slice Name | expansion-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
100. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-xhtml | |
Slice Name | expansion-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
102. ValueSet.expansion.contains.extension:conceptConceptOrder | |
Slice Name | conceptConceptOrder |
Comments | The presence of a sort order implies that sort order is important. |
Control | 0..1 |
Type | Extension(ValueSet Concept Order) (Extension Type: integer) |
Must Support | true |
104. ValueSet.expansion.contains.extension:containsProperty | |
Slice Name | containsProperty |
Control | 0..* |
Type | Extension(Extension Definition for ValueSet.expansion.contains.property for Version 5.0) (Complex Extension) |
Must Support | true |
Requirements | ... Allows support for itemWeight and other key properties |
106. ValueSet.expansion.contains.system | |
Must Support | true |
108. ValueSet.expansion.contains.abstract | |
Must Support | true |
110. ValueSet.expansion.contains.version | |
Note | This is a business version Id, not a resource version Id (see discussion) |
Must Support | true |
112. ValueSet.expansion.contains.code | |
Must Support | true |
114. ValueSet.expansion.contains.display | |
Must Support | true |
116. ValueSet.expansion.contains.display.extension | |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
118. ValueSet.expansion.contains.display.extension:expansionDisplay-renderingStyle | |
Slice Name | expansionDisplay-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
120. ValueSet.expansion.contains.display.extension:expansionDisplay-xhtml | |
Slice Name | expansionDisplay-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
122. ValueSet.expansion.contains.designation | |
Type | BackboneElement |
124. ValueSet.expansion.contains.designation.extension | |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.designation.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
126. ValueSet.expansion.contains.designation.extension:expansionDesignation-renderingStyle | |
Slice Name | expansionDesignation-renderingStyle |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
128. ValueSet.expansion.contains.designation.extension:expansionDesignation-xhtml | |
Slice Name | expansionDesignation-xhtml |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
130. ValueSet.expansion.contains.contains | |
Must Support | true |
Guidance on how to interpret the contents of this table can be found here
0. ValueSet | |
Definition | Sets expectations for SDC-conformant systems around value set support for representing permitted question answers. A ValueSet resource instance specifies a set of codes drawn from one or more code systems, intended for use in a particular context. Value sets link between CodeSystem definitions and their use in coded elements. |
Short | A set of codes drawn from one or more code systems |
Control | 0..* |
Is Modifier | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) vsd-0: Name should be usable as an identifier for the module by machine processing applications such as code generation ( name.matches('[A-Z]([A-Za-z0-9_]){0,254}') )vsd-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}')) |
2. ValueSet.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. ValueSet.modifierExtension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | ExtensionExtensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.modifierExtension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
6. ValueSet.modifierExtension:rendering-criticalExtension | |
Slice Name | rendering-criticalExtension |
Definition | Indicates an extension that must be supported by the system presenting the instance for data capture or end-user consumption. If a system does not recognize the extension or cannot implement the functionality defined by the extension, it should display an error message or warning and refrain from presenting the instance to the user or using it when capturing data. |
Short | Extension that must be supported |
Comments | This may point to extensions that control the appearance of data elements, control what value elements have, what elements are or are not available, what elements can or cannot be edited, or rules about how editing may occur. This extension does NOT apply when simply rendering a resource for publication purposes or for other purposes not intended for end-user data capture or data consumption. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(Rendering Critical Extension) (Extension Type: canonical) |
Is Modifier | true because Indicates that the Questionnaire can't be safely rendered in certain situations |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
8. ValueSet.url | |
Definition | An absolute URI that is used to identify this value set when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this value set is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the value set is stored on different servers. |
Short | Canonical identifier for this value set, represented as a URI (globally unique) |
Comments | Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found. |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Allows the value set to be referenced by a single globally unique identifier. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. ValueSet.status | |
Definition | The status of this value set. Enables tracking the life-cycle of the content. The status of the value set applies to the value set definition (ValueSet.compose) and the associated ValueSet metadata. Expansions do not have a state. |
Short | draft | active | retired | unknown |
Comments | Allows filtering of value sets that are appropriate for use versus not.See also the valueset-workflowStatus extension for additional status information related to the editorial process. |
Control | 1..1 |
Binding | The codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1 )The lifecycle status of an artifact. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. ValueSet.experimental | |
Definition | A Boolean value to indicate that this value set is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage. |
Short | For testing purposes, not real usage |
Comments | Allows filtering of value sets that are appropriate for use versus not. |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Enables experimental content to be developed following the same lifecycle that would be used for a production-level value set. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. ValueSet.date | |
Definition | The date (and optionally time) when the value set was created or revised (e.g. the 'content logical definition'). |
Short | Date last changed |
Comments | Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the value set. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. |
Control | 0..1 |
Type | dateTime |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Alternate Names | Revision Date |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. ValueSet.description | |
Definition | A free text natural language description of the value set from a consumer's perspective. The textual description specifies the span of meanings for concepts to be included within the Value Set Expansion, and also may specify the intended use and limitations of the Value Set. |
Short | Natural language description of the value set |
Comments | This description can be used to capture details such as why the value set was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the value set as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the value set is presumed to be the predominant language in the place the value set was created).The description is not intended to describe the semantics of the Value Set - there are no intrinsic semantics separate from the codes contained in its expansion. The description should capture its intended use, which is needed for ensuring integrity for its use in models across future changes. A description should be provided unless the value set is a contained resource (e.g. an anonymous value set in a profile). Most registries will require a description. |
Control | 0..1 |
Type | markdown |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Alternate Names | Scope, Purpose |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. ValueSet.immutable | |
Definition | If this is set to 'true', then no new versions of the content logical definition can be created. Note: Other metadata might still change. |
Short | Indicates whether or not any change to the content logical definition may occur |
Comments | Normally immutability is set to 'false', which is the default assumption if it is not populated. Note that the implication is that if this is set to 'true', there may be only one ValueSet version for this definition. Immutability tends to be set to 'true' in one of two cases: - Where the value set, by the nature of its usage, cannot change. For example "All specializations of ACT in ActClassCode" - Where there's no safe way to express the "Purpose" such that someone else could safely make changes to the value set definition. Source workflow control must guarantee that the same URI always yields the same definition. |
Control | 10..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. ValueSet.compose | |
Definition | A set of criteria that define the contents of the value set by including or excluding codes selected from the specified code system(s) that the value set draws from. This is also known as the Content Logical Definition (CLD). |
Short | Content logical definition of the value set (CLD) |
Control | 0..1 |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | false |
Alternate Names | Content Logical Definition, CLD |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. ValueSet.compose.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
24. ValueSet.compose.lockedDate | |
Definition | The Locked Date is the effective date that is used to determine the version of all referenced Code Systems and Value Set Definitions included in the compose that are not already tied to a specific version. |
Short | Fixed date for references with no specified version (transitive) |
Comments | With a defined lockedDate the value set is considered "Locked". Otherwise, the value set may have different expansions as underlying code systems and/or value sets evolve. The interpretation of lockedDate is often dependent on the context - e.g. a SNOMED CT derived value set with a lockedDate will have a different expansion in USA than in UK. If a value set specifies a version for include and exclude statements, and also specifies a locked date, the specified versions need to be available that date, or the value set will not be usable. |
Control | 0..1 |
Type | date |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
26. ValueSet.compose.inactive | |
Definition | Whether inactive codes - codes that are not approved for current use - are in the value set. If inactive = true, inactive codes are to be included in the expansion, if inactive = false, the inactive codes will not be included in the expansion. If absent, the behavior is determined by the implementation, or by the applicable $expand parameters (but generally, inactive codes would be expected to be included). |
Short | Whether inactive codes are in the value set |
Comments | Note that in the FHIR terminology framework, "deprecated" does not mean inactive, but in some code systems, e.g. LOINC, "deprecated" does mean inactive. Code systems should define what codes are considered to be inactive. If this is not clearly defined (including in the FHIR code system resource), then all codes are assumed to be active. The Value Set Definition specification defines an ActiveOnly element, which is the reverse of this element e.g. (ValueSet.compose.inactive=FALSE) is the same as (VSD.ActiveOnly=TRUE). |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. ValueSet.compose.include | |
Definition | Include one or more codes from a code system or other value set(s). |
Short | Include one or more codes from a code system or other value set(s) |
Comments | All the conditions in an include must be true. If a system is listed, all the codes from the system are listed. If one or more filters are listed, all of the filters must apply. If one or more value sets are listed, the codes must be in all the value sets. E.g. each include is 'include all the codes that meet all these conditions'. |
Control | 1..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) vsd-1: A value set include/exclude SHALL have a value set or a system ( valueSet.exists() or system.exists() )vsd-2: A value set with concepts or filters SHALL include a system ( (concept.exists() or filter.exists()) implies system.exists() )vsd-3: Cannot have both concept and filter ( concept.empty() or filter.empty() )vsd-1: A value set include/exclude SHALL have a value set or a system (valueSet.exists() or system.exists()) vsd-2: A value set with concepts or filters SHALL include a system ((concept.exists() or filter.exists()) implies system.exists()) vsd-3: Cannot have both concept and filter (concept.empty() or filter.empty()) |
30. ValueSet.compose.include.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
32. ValueSet.compose.include.system | |
Definition | An absolute URI which is the code system from which the selected codes come from. |
Short | The system the codes come from |
Comments | If there are no codes or filters, the entire code system is included. Note that the set of codes that are included may contain abstract codes. See ''Coding.system'' for further documentation about the correct value for the system element. |
Control | 0..1 This element is affected by the following invariants: vsd-1, vsd-2 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. ValueSet.compose.include.version | |
Definition | The version of the code system that the codes are selected from, or the special version '*' for all versions. |
Short | Specific version of the code system referred to |
Comments | This is used when selecting the descendants of a concept - they may change between versions. If no version is specified, then the exact contents of the value set might not be known until a context of use binds it to a particular version. The special value '*' means all versions; It is at server discretion regarding expansions and which versions must be supported. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. ValueSet.compose.include.concept | |
Definition | Specifies a concept to be included or excluded. |
Short | A concept defined in the system |
Comments | The list of concepts is considered ordered, though the order might not have any particular significance. Typically, the order of an expansion follows that defined in the compose element. |
Control | 0..* This element is affected by the following invariants: vsd-3 |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
38. ValueSet.compose.include.concept.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
40. ValueSet.compose.include.concept.extension:conceptLabel | |
Slice Name | conceptLabel |
Definition | The label to list in front of a code when presenting a list of possible values in a questionnaire-like fashion. |
Short | E.g. "(a)", "1.", etc. |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(ValueSet Label) (Extension Type: string) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
42. ValueSet.compose.include.concept.extension:conceptLabel.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
44. ValueSet.compose.include.concept.extension:conceptLabel.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-label |
46. ValueSet.compose.include.concept.extension:conceptLabel.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
48. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
50. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-renderingStyle | |
Slice Name | code-renderingStyle |
Definition | Identifies how the specified element should be rendered when displayed. |
Short | Html style value |
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
52. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-xhtml | |
Slice Name | code-xhtml |
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. |
Short | String equivalent with html markup |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
54. ValueSet.compose.include.concept.extension:conceptConceptOrder | |
Slice Name | conceptConceptOrder |
Definition | Identifies the relative order in which concepts within the value set should be presented to a user. |
Short | Appearance order for user selection |
Comments | The presence of a sort order implies that sort order is important. |
Control | 0..1 |
Type | Extension(ValueSet Concept Order) (Extension Type: integer) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
56. ValueSet.compose.include.concept.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
58. ValueSet.compose.include.concept.code | |
Definition | Specifies a code for the concept to be included or excluded. |
Short | Code or expression from system |
Comments | Expressions are allowed if defined by the underlying code system. |
Control | 1..1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
60. ValueSet.compose.include.concept.display | |
Definition | The text to display to the user for this concept in the context of this valueset. If no display is provided, then applications using the value set use the display specified for the code by the system. |
Short | Text to display for this code for this value set in this valueset |
Comments | The value set resource allows for an alternative display to be specified for when this concept is used in this particular value set. See notes in the value set narrative about the correct use of this element. |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
62. ValueSet.compose.include.concept.display.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
64. ValueSet.compose.include.concept.display.extension:codeDisplay-renderingStyle | |
Slice Name | codeDisplay-renderingStyle |
Definition | Identifies how the specified element should be rendered when displayed. |
Short | Html style value |
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
66. ValueSet.compose.include.concept.display.extension:codeDisplay-xhtml | |
Slice Name | codeDisplay-xhtml |
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. |
Short | String equivalent with html markup |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
68. ValueSet.compose.include.filter | |
Definition | Select concepts by specify a matching criterion based on the properties (including relationships) defined by the system, or on filters defined by the system. If multiple filters are specified, they SHALL all be true. |
Short | Select codes/concepts by their properties (including relationships) |
Comments | Selecting codes by specifying filters based on properties is only possible where the underlying code system defines appropriate properties. Note that in some cases, the underlying code system defines the logical concepts but not the literal codes for the concepts. In such cases, the literal definitions may be provided by a third party. |
Control | 0..* This element is affected by the following invariants: vsd-3 |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
70. ValueSet.compose.include.filter.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
72. ValueSet.compose.include.filter.property | |
Definition | A code that identifies a property or a filter defined in the code system. |
Short | A property/filter defined by the code system |
Control | 1..1 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
74. ValueSet.compose.include.filter.op | |
Definition | The kind of operation to perform as a part of the filter criteria. |
Short | = | is-a | descendent-of | is-not-a | regex | in | not-in | generalizes | exists |
Comments | In case filter.property represents a property of the system, the operation applies to the selected property. In case filter.property represents a filter of the system, the operation SHALL match one of the CodeSystem.filter.operator values. |
Control | 1..1 |
Binding | The codes SHALL be taken from FilterOperatorhttp://hl7.org/fhir/ValueSet/filter-operator|4.0.1 (required to http://hl7.org/fhir/ValueSet/filter-operator|4.0.1 )The kind of operation to perform as a part of a property based filter. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
76. ValueSet.compose.include.filter.value | |
Definition | The match value may be either a code defined by the system, or a string value, which is a regex match on the literal string of the property value (if the filter represents a property defined in CodeSystem) or of the system filter value (if the filter represents a filter defined in CodeSystem) when the operation is 'regex', or one of the values (true and false), when the operation is 'exists'. |
Short | Code from the system, or regex criteria, or boolean value for exists |
Comments | Use regex matching with care - full regex matching on every SNOMED CT term is prohibitive, for example. |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
78. ValueSet.compose.include.valueSet | |
Definition | Selects the concepts found in this value set (based on its value set definition). This is an absolute URI that is a reference to ValueSet.url. If multiple value sets are specified this includes the union of the contents of all of the referenced value sets. |
Short | Select the contents included in this value set |
Comments | The value set URI is either a logical reference to a defined value set such as a SNOMED CT reference set, or a direct reference to a value set definition using ValueSet.url. The reference might not refer to an actual FHIR ValueSet resource; in this case, whatever is referred to is an implicit definition of a value set that needs to be clear about how versions are resolved. |
Control | 0..* This element is affected by the following invariants: vsd-1 |
Type | canonical(ValueSet) |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
80. ValueSet.compose.exclude | |
Definition | Exclude one or more codes from the value set based on code system filters and/or other value sets. |
Short | Explicitly exclude codes from a code system or other value sets |
Comments | Usually this is used to selectively exclude codes that were included by subsumption in the inclusions. Any display names specified for the codes are ignored. |
Control | 0..* This element is affected by the following invariants: vsd-2 |
Type | Seettp://hl7.org/fhir/StructureDefinition/ValueSet#ValueSet.compose.include |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
82. ValueSet.expansion | |
Definition | A value set can also be "expanded", where the value set is turned into a simple collection of enumerated codes. This element holds the expansion, if it has been performed. |
Short | Used when the value set is "expanded" |
Comments | Expansion is performed to produce a collection of codes that are ready to use for data entry or validation. Value set expansions are always considered to be stateless - they are a record of the set of codes in the value set at a point in time under a given set of conditions, and are not subject to ongoing maintenance. Expansion.parameter is a simplified list of parameters - a subset of the features of the Parameters resource. Expansion is performed to produce a collection of codes that are ready to use for data entry or validation. Value set expansions are always considered to be stateless - they are a record of the set of codes in the value set at a point in time under a given set of conditions, and are not subject to ongoing maintenance. Expansion.parameter is a simplified list of parameters - a subset of the features of the Parameters resource. |
Control | 0..1 |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
84. ValueSet.expansion.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
86. ValueSet.expansion.extension:expansionSource | |
Slice Name | expansionSource |
Definition | The logical URL of the ValueSet definition that was used to generate this expansion. |
Short | ValueSet definition used to generate this expansion (logical URL) |
Control | 0..1 |
Type | Extension(ValueSet Expansion Source) (Extension Type: uri) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
88. ValueSet.expansion.extension:expansionProperty | |
Slice Name | expansionProperty |
Definition | Optional Extension Element - found in all resources. |
Short | Optional Extensions Element |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(Extension Definition for ValueSet.expansion.property for Version 5.0) (Complex Extension) |
Is Modifier | false |
Must Support | true |
Requirements | Allows support for itemWeight and other key properties |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
90. ValueSet.expansion.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
92. ValueSet.expansion.identifier | |
Definition | An identifier that uniquely identifies this expansion of the valueset, based on a unique combination of the provided parameters, the system default parameters, and the underlying system code system versions etc. Systems may re-use the same identifier as long as those factors remain the same, and the expansion is the same, but are not required to do so. This is a business identifier. |
Short | Identifies the value set expansion (business identifier) |
Comments | Typically, this uri is a UUID (e.g. urn:uuid:8230ff20-c97a-4167-a59d-dc2cb9df16dd). |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
94. ValueSet.expansion.timestamp | |
Definition | The time at which the expansion was produced by the expanding system. |
Short | Time ValueSet expansion happened |
Comments | This SHOULD be a fully populated instant, but in some circumstances, value sets are expanded by hand, and the expansion is published without that precision. |
Control | 1..1 |
Type | dateTime |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
96. ValueSet.expansion.contains | |
Definition | The codes that are contained in the value set expansion. |
Short | Codes in the value set |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) vsd-6: SHALL have a code or a display ( code.exists() or display.exists() )vsd-9: Must have a code if not abstract ( code.exists() or abstract = true )vsd-10: Must have a system if a code is present ( code.empty() or system.exists() )vsd-6: SHALL have a code or a display (code.exists() or display.exists()) vsd-9: Must have a code if not abstract (code.exists() or abstract = true) vsd-10: Must have a system if a code is present (code.empty() or system.exists()) |
98. ValueSet.expansion.contains.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
100. ValueSet.expansion.contains.extension:expansionLabel | |
Slice Name | expansionLabel |
Definition | The label to list in front of a code when presenting a list of possible values in a questionnaire-like fashion. |
Short | E.g. "(a)", "1.", etc. |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(ValueSet Label) (Extension Type: string) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
102. ValueSet.expansion.contains.extension:expansionLabel.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..0* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
104. ValueSet.expansion.contains.extension:expansionLabel.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Short | identifies the meaning of the extension |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Control | 1..1 |
Type | uri |
Is Modifier | false |
XML Format | In the XML format, this property is represented as an attribute. |
Summary | false |
Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-label |
106. ValueSet.expansion.contains.extension:expansionLabel.value[x] | |
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Short | Value of extension |
Control | 10..1 This element is affected by the following invariants: ext-1 |
Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
108. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
110. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-renderingStyle | |
Slice Name | expansion-renderingStyle |
Definition | Identifies how the specified element should be rendered when displayed. |
Short | Html style value |
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
112. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-xhtml | |
Slice Name | expansion-xhtml |
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. |
Short | String equivalent with html markup |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
114. ValueSet.expansion.contains.extension:conceptConceptOrder | |
Slice Name | conceptConceptOrder |
Definition | Identifies the relative order in which concepts within the value set should be presented to a user. |
Short | Appearance order for user selection |
Comments | The presence of a sort order implies that sort order is important. |
Control | 0..1 |
Type | Extension(ValueSet Concept Order) (Extension Type: integer) |
Is Modifier | false |
Must Support | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
116. ValueSet.expansion.contains.extension:containsProperty | |
Slice Name | containsProperty |
Definition | Optional Extension Element - found in all resources. |
Short | Optional Extensions Element |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(Extension Definition for ValueSet.expansion.contains.property for Version 5.0) (Complex Extension) |
Is Modifier | false |
Must Support | true |
Requirements | Allows support for itemWeight and other key properties |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) |
118. ValueSet.expansion.contains.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
120. ValueSet.expansion.contains.system | |
Definition | An absolute URI which is the code system in which the code for this item in the expansion is defined. |
Short | System value for the code |
Control | 0..1 |
Type | uri |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
122. ValueSet.expansion.contains.abstract | |
Definition | If true, this entry is included in the expansion for navigational purposes, and the user cannot select the code directly as a proper value. |
Short | If user cannot select this entry |
Comments | This should not be understood to exclude its use for searching (e.g. by subsumption testing). The client should know whether it is appropriate for the user to select an abstract code or not. |
Control | 0..1 |
Type | boolean |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Meaning if Missing | If this is not populated, systems can assume that the concept it not abstract. This SHALL always be populated for abstract concepts |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
124. ValueSet.expansion.contains.version | |
Definition | The version of the code system from this code was taken. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. |
Short | Version in which this code/display is defined |
Comments | The exact value of the version string is specified by the system from which the code is derived. |
Note | This is a business version Id, not a resource version Id (see discussion) |
Control | 0..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
126. ValueSet.expansion.contains.code | |
Definition | The code for this item in the expansion hierarchy. If this code is missing the entry in the hierarchy is a place holder (abstract) and does not represent a valid code in the value set. |
Short | Code - if blank, this is not a selectable code |
Control | 0..1 This element is affected by the following invariants: vsd-6 |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
128. ValueSet.expansion.contains.display | |
Definition | The recommended display for this item in the expansion. |
Short | User display for the concept |
Control | 0..1 This element is affected by the following invariants: vsd-6 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
130. ValueSet.expansion.contains.display.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
132. ValueSet.expansion.contains.display.extension:expansionDisplay-renderingStyle | |
Slice Name | expansionDisplay-renderingStyle |
Definition | Identifies how the specified element should be rendered when displayed. |
Short | Html style value |
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
134. ValueSet.expansion.contains.display.extension:expansionDisplay-xhtml | |
Slice Name | expansionDisplay-xhtml |
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. |
Short | String equivalent with html markup |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
136. ValueSet.expansion.contains.designation | |
Definition | Additional representations for this item - other languages, aliases, specialized purposes, used for particular purposes, etc. These are relevant when the conditions of the expansion do not fix to a single correct representation. |
Short | Additional representations for this item |
Comments | The designations provided must be based on the value set and code system definitions. |
Control | 0..* |
Type | BackboneElement |
Is Modifier | false |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
138. ValueSet.expansion.contains.designation.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Short | ExtensionAdditional content defined by implementations |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | false |
Summary | false |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.designation.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
140. ValueSet.expansion.contains.designation.extension:expansionDesignation-renderingStyle | |
Slice Name | expansionDesignation-renderingStyle |
Definition | Identifies how the specified element should be rendered when displayed. |
Short | Html style value |
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(Rendering Style) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
142. ValueSet.expansion.contains.designation.extension:expansionDesignation-xhtml | |
Slice Name | expansionDesignation-xhtml |
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. |
Short | String equivalent with html markup |
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. |
Control | 0..1 |
Type | Extension(XHTML Representation) (Extension Type: string) |
Is Modifier | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() )ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
144. ValueSet.expansion.contains.designation.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored even if unrecognized |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
146. ValueSet.expansion.contains.designation.value | |
Definition | The text value for this designation. |
Short | The text value for this designation |
Control | 1..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
148. ValueSet.expansion.contains.contains | |
Definition | Other codes and entries contained under this entry in the hierarchy. |
Short | Codes contained under this entry |
Comments | If the expansion uses this element, there is no implication about the logical relationship between them, and the structure cannot be used for logical inferencing. The structure exists to provide navigational assistance for helping human users to locate codes in the expansion. |
Control | 0..* |
Type | Seettp://hl7.org/fhir/StructureDefinition/ValueSet#ValueSet.expansion.contains |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. ValueSet | |||||
Definition | Sets expectations for SDC-conformant systems around value set support for representing permitted question answers. | ||||
Short | A set of codes drawn from one or more code systems | ||||
Control | 0..* | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() )vsd-0: Name should be usable as an identifier for the module by machine processing applications such as code generation ( name.matches('[A-Z]([A-Za-z0-9_]){0,254}') ) | ||||
2. ValueSet.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. ValueSet.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. ValueSet.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. ValueSet.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. ValueSet.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. ValueSet.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. ValueSet.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. ValueSet.modifierExtension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.modifierExtension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
18. ValueSet.modifierExtension:rendering-criticalExtension | |||||
Slice Name | rendering-criticalExtension | ||||
Definition | Indicates an extension that must be supported by the system presenting the instance for data capture or end-user consumption. If a system does not recognize the extension or cannot implement the functionality defined by the extension, it should display an error message or warning and refrain from presenting the instance to the user or using it when capturing data. | ||||
Short | Extension that must be supported | ||||
Comments | This may point to extensions that control the appearance of data elements, control what value elements have, what elements are or are not available, what elements can or cannot be edited, or rules about how editing may occur. This extension does NOT apply when simply rendering a resource for publication purposes or for other purposes not intended for end-user data capture or data consumption. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Rendering Critical Extension) (Extension Type: canonical) | ||||
Is Modifier | true because Indicates that the Questionnaire can't be safely rendered in certain situations | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
20. ValueSet.url | |||||
Definition | An absolute URI that is used to identify this value set when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this value set is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the value set is stored on different servers. | ||||
Short | Canonical identifier for this value set, represented as a URI (globally unique) | ||||
Comments | Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Allows the value set to be referenced by a single globally unique identifier. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. ValueSet.identifier | |||||
Definition | A formal identifier that is used to identify this value set when it is represented in other formats, or referenced in a specification, model, design or an instance. | ||||
Short | Additional identifier for the value set (business identifier) | ||||
Comments | Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this value set outside of FHIR, where it is not possible to use the logical URI. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Allows externally provided and/or usable business identifiers to be easily associated with the module. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. ValueSet.version | |||||
Definition | The identifier that is used to identify this version of the value set when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the value set author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. | ||||
Short | Business version of the value set | ||||
Comments | There may be different value set instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the value set with the format [url]|[version]. | ||||
Note | This is a business version Id, not a resource version Id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. ValueSet.name | |||||
Definition | A natural language name identifying the value set. This name should be usable as an identifier for the module by machine processing applications such as code generation. | ||||
Short | Name for this value set (computer friendly) | ||||
Comments | The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.A name should be provided unless the value set is a contained resource (e.g. an anonymous value set in a profile). Most registries will require a name. | ||||
Control | 0..1 This element is affected by the following invariants: inv-0 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Support human navigation and code generation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. ValueSet.title | |||||
Definition | A short, descriptive, user-friendly title for the value set. | ||||
Short | Name for this value set (human friendly) | ||||
Comments | This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. ValueSet.status | |||||
Definition | The status of this value set. Enables tracking the life-cycle of the content. The status of the value set applies to the value set definition (ValueSet.compose) and the associated ValueSet metadata. Expansions do not have a state. | ||||
Short | draft | active | retired | unknown | ||||
Comments | Allows filtering of value sets that are appropriate for use versus not.See also the valueset-workflowStatus extension for additional status information related to the editorial process. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from PublicationStatus (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1 )The lifecycle status of an artifact. | ||||
Type | code | ||||
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. ValueSet.experimental | |||||
Definition | A Boolean value to indicate that this value set is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage. | ||||
Short | For testing purposes, not real usage | ||||
Comments | Allows filtering of value sets that are appropriate for use versus not. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Enables experimental content to be developed following the same lifecycle that would be used for a production-level value set. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. ValueSet.date | |||||
Definition | The date (and optionally time) when the value set was created or revised (e.g. the 'content logical definition'). | ||||
Short | Date last changed | ||||
Comments | Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the value set. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Alternate Names | Revision Date | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. ValueSet.publisher | |||||
Definition | The name of the organization or individual that published the value set. | ||||
Short | Name of the publisher (organization or individual) | ||||
Comments | Usually an organization but may be an individual. The publisher (or steward) of the value set is the organization or individual primarily responsible for the maintenance and upkeep of the value set. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the value set. This item SHOULD be populated unless the information is available from context. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Helps establish the "authority/credibility" of the value set. May also allow for contact. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. ValueSet.contact | |||||
Definition | Contact details to assist a user in finding and communicating with the publisher. | ||||
Short | Contact details for the publisher | ||||
Comments | May be a web site, an email address, a telephone number, etc. | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. ValueSet.description | |||||
Definition | A free text natural language description of the value set from a consumer's perspective. The textual description specifies the span of meanings for concepts to be included within the Value Set Expansion, and also may specify the intended use and limitations of the Value Set. | ||||
Short | Natural language description of the value set | ||||
Comments | This description can be used to capture details such as why the value set was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the value set as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the value set is presumed to be the predominant language in the place the value set was created).The description is not intended to describe the semantics of the Value Set - there are no intrinsic semantics separate from the codes contained in its expansion. The description should capture its intended use, which is needed for ensuring integrity for its use in models across future changes. A description should be provided unless the value set is a contained resource (e.g. an anonymous value set in a profile). Most registries will require a description. | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Alternate Names | Scope, Purpose | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. ValueSet.useContext | |||||
Definition | The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate value set instances. | ||||
Short | The context that the content is intended to support | ||||
Comments | When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. | ||||
Control | 0..* | ||||
Type | UsageContext | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Assist in searching for appropriate content. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. ValueSet.jurisdiction | |||||
Definition | A legal or geographic region in which the value set is intended to be used. | ||||
Short | Intended jurisdiction for value set (if applicable) | ||||
Comments | It may be possible for the value set to be used in jurisdictions other than those for which it was originally designed or intended. | ||||
Control | 0..* | ||||
Binding | Unless not suitable, these codes SHALL be taken from Jurisdiction ValueSet (extensible to http://hl7.org/fhir/ValueSet/jurisdiction )Countries and regions within which this artifact is targeted for use. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. ValueSet.immutable | |||||
Definition | If this is set to 'true', then no new versions of the content logical definition can be created. Note: Other metadata might still change. | ||||
Short | Indicates whether or not any change to the content logical definition may occur | ||||
Comments | Normally immutability is set to 'false', which is the default assumption if it is not populated. Note that the implication is that if this is set to 'true', there may be only one ValueSet version for this definition. Immutability tends to be set to 'true' in one of two cases: - Where the value set, by the nature of its usage, cannot change. For example "All specializations of ACT in ActClassCode" - Where there's no safe way to express the "Purpose" such that someone else could safely make changes to the value set definition. Source workflow control must guarantee that the same URI always yields the same definition. | ||||
Control | 1..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
48. ValueSet.purpose | |||||
Definition | Explanation of why this value set is needed and why it has been designed as it has. | ||||
Short | Why this value set is defined | ||||
Comments | This element does not describe the usage of the value set. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this value set. | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. ValueSet.copyright | |||||
Definition | A copyright statement relating to the value set and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the value set. | ||||
Short | Use and/or publishing restrictions | ||||
Comments | nullFrequently, the copyright differs between the value set and the codes that are included. The copyright statement should clearly differentiate between these when required. | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Consumers must be able to determine any legal restrictions on the use of the value set and/or its content. | ||||
Alternate Names | License, Restrictions | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. ValueSet.compose | |||||
Definition | A set of criteria that define the contents of the value set by including or excluding codes selected from the specified code system(s) that the value set draws from. This is also known as the Content Logical Definition (CLD). | ||||
Short | Content logical definition of the value set (CLD) | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Alternate Names | Content Logical Definition, CLD | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. ValueSet.compose.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
56. ValueSet.compose.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
58. ValueSet.compose.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
60. ValueSet.compose.lockedDate | |||||
Definition | The Locked Date is the effective date that is used to determine the version of all referenced Code Systems and Value Set Definitions included in the compose that are not already tied to a specific version. | ||||
Short | Fixed date for references with no specified version (transitive) | ||||
Comments | With a defined lockedDate the value set is considered "Locked". Otherwise, the value set may have different expansions as underlying code systems and/or value sets evolve. The interpretation of lockedDate is often dependent on the context - e.g. a SNOMED CT derived value set with a lockedDate will have a different expansion in USA than in UK. If a value set specifies a version for include and exclude statements, and also specifies a locked date, the specified versions need to be available that date, or the value set will not be usable. | ||||
Control | 0..1 | ||||
Type | date | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. ValueSet.compose.inactive | |||||
Definition | Whether inactive codes - codes that are not approved for current use - are in the value set. If inactive = true, inactive codes are to be included in the expansion, if inactive = false, the inactive codes will not be included in the expansion. If absent, the behavior is determined by the implementation, or by the applicable $expand parameters (but generally, inactive codes would be expected to be included). | ||||
Short | Whether inactive codes are in the value set | ||||
Comments | Note that in the FHIR terminology framework, "deprecated" does not mean inactive, but in some code systems, e.g. LOINC, "deprecated" does mean inactive. Code systems should define what codes are considered to be inactive. If this is not clearly defined (including in the FHIR code system resource), then all codes are assumed to be active. The Value Set Definition specification defines an ActiveOnly element, which is the reverse of this element e.g. (ValueSet.compose.inactive=FALSE) is the same as (VSD.ActiveOnly=TRUE). | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. ValueSet.compose.include | |||||
Definition | Include one or more codes from a code system or other value set(s). | ||||
Short | Include one or more codes from a code system or other value set(s) | ||||
Comments | All the conditions in an include must be true. If a system is listed, all the codes from the system are listed. If one or more filters are listed, all of the filters must apply. If one or more value sets are listed, the codes must be in all the value sets. E.g. each include is 'include all the codes that meet all these conditions'. | ||||
Control | 1..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )vsd-1: A value set include/exclude SHALL have a value set or a system ( valueSet.exists() or system.exists() )vsd-2: A value set with concepts or filters SHALL include a system ( (concept.exists() or filter.exists()) implies system.exists() )vsd-3: Cannot have both concept and filter ( concept.empty() or filter.empty() ) | ||||
66. ValueSet.compose.include.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
68. ValueSet.compose.include.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
70. ValueSet.compose.include.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
72. ValueSet.compose.include.system | |||||
Definition | An absolute URI which is the code system from which the selected codes come from. | ||||
Short | The system the codes come from | ||||
Comments | If there are no codes or filters, the entire code system is included. Note that the set of codes that are included may contain abstract codes. See ''Coding.system'' for further documentation about the correct value for the system element. | ||||
Control | 0..1 This element is affected by the following invariants: vsd-1, vsd-2 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. ValueSet.compose.include.version | |||||
Definition | The version of the code system that the codes are selected from, or the special version '*' for all versions. | ||||
Short | Specific version of the code system referred to | ||||
Comments | This is used when selecting the descendants of a concept - they may change between versions. If no version is specified, then the exact contents of the value set might not be known until a context of use binds it to a particular version. The special value '*' means all versions; It is at server discretion regarding expansions and which versions must be supported. | ||||
Note | This is a business version Id, not a resource version Id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
76. ValueSet.compose.include.concept | |||||
Definition | Specifies a concept to be included or excluded. | ||||
Short | A concept defined in the system | ||||
Comments | The list of concepts is considered ordered, though the order might not have any particular significance. Typically, the order of an expansion follows that defined in the compose element. | ||||
Control | 0..* This element is affected by the following invariants: vsd-3 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
78. ValueSet.compose.include.concept.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
80. ValueSet.compose.include.concept.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
82. ValueSet.compose.include.concept.extension:conceptLabel | |||||
Slice Name | conceptLabel | ||||
Definition | The label to list in front of a code when presenting a list of possible values in a questionnaire-like fashion. | ||||
Short | E.g. "(a)", "1.", etc. | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(ValueSet Label) (Extension Type: string) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
84. ValueSet.compose.include.concept.extension:conceptLabel.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | id | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
86. ValueSet.compose.include.concept.extension:conceptLabel.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
88. ValueSet.compose.include.concept.extension:conceptLabel.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Short | identifies the meaning of the extension | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Control | 1..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-label | ||||
90. ValueSet.compose.include.concept.extension:conceptLabel.value[x] | |||||
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). | ||||
Short | Value of extension | ||||
Control | 1..1 This element is affected by the following invariants: ext-1 | ||||
Type | string | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. ValueSet.compose.include.concept.extension:conceptLabel.value[x].id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Short | xml:id (or equivalent in JSON) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
94. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
96. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-renderingStyle | |||||
Slice Name | code-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
98. ValueSet.compose.include.concept.extension:conceptLabel.value[x].extension:code-xhtml | |||||
Slice Name | code-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
100. ValueSet.compose.include.concept.extension:conceptLabel.value[x].value | |||||
Definition | The actual value | ||||
Short | Primitive value for string | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Max Length: | 1048576 | ||||
102. ValueSet.compose.include.concept.extension:conceptConceptOrder | |||||
Slice Name | conceptConceptOrder | ||||
Definition | Identifies the relative order in which concepts within the value set should be presented to a user. | ||||
Short | Appearance order for user selection | ||||
Comments | The presence of a sort order implies that sort order is important. | ||||
Control | 0..1 | ||||
Type | Extension(ValueSet Concept Order) (Extension Type: integer) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
104. ValueSet.compose.include.concept.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
106. ValueSet.compose.include.concept.code | |||||
Definition | Specifies a code for the concept to be included or excluded. | ||||
Short | Code or expression from system | ||||
Comments | Expressions are allowed if defined by the underlying code system. | ||||
Control | 1..1 | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. ValueSet.compose.include.concept.display | |||||
Definition | The text to display to the user for this concept in the context of this valueset. If no display is provided, then applications using the value set use the display specified for the code by the system. | ||||
Short | Text to display for this code for this value set in this valueset | ||||
Comments | The value set resource allows for an alternative display to be specified for when this concept is used in this particular value set. See notes in the value set narrative about the correct use of this element. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
110. ValueSet.compose.include.concept.display.id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Short | xml:id (or equivalent in JSON) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
112. ValueSet.compose.include.concept.display.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
114. ValueSet.compose.include.concept.display.extension:codeDisplay-renderingStyle | |||||
Slice Name | codeDisplay-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
116. ValueSet.compose.include.concept.display.extension:codeDisplay-xhtml | |||||
Slice Name | codeDisplay-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
118. ValueSet.compose.include.concept.display.value | |||||
Definition | The actual value | ||||
Short | Primitive value for string | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Max Length: | 1048576 | ||||
120. ValueSet.compose.include.concept.designation | |||||
Definition | Additional representations for this concept when used in this value set - other languages, aliases, specialized purposes, used for particular purposes, etc. | ||||
Short | Additional representations for this concept | ||||
Comments | Concepts have both a | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
122. ValueSet.compose.include.concept.designation.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
124. ValueSet.compose.include.concept.designation.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.compose.include.concept.designation.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
126. ValueSet.compose.include.concept.designation.extension:designation-renderingStyle | |||||
Slice Name | designation-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
128. ValueSet.compose.include.concept.designation.extension:designation-xhtml | |||||
Slice Name | designation-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
130. ValueSet.compose.include.concept.designation.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
132. ValueSet.compose.include.concept.designation.language | |||||
Definition | The language this designation is defined for. | ||||
Short | Human language of the designation | ||||
Comments | In the absence of a language, the resource language applies. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
134. ValueSet.compose.include.concept.designation.use | |||||
Definition | A code that represents types of uses of designations. | ||||
Short | Types of uses of designations | ||||
Comments | If no use is provided, the designation can be assumed to be suitable for general display to a human user. | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from DesignationUse (extensible to http://hl7.org/fhir/ValueSet/designation-use )Details of how a designation would be used. | ||||
Type | Coding | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
136. ValueSet.compose.include.concept.designation.value | |||||
Definition | The text value for this designation. | ||||
Short | The text value for this designation | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
138. ValueSet.compose.include.filter | |||||
Definition | Select concepts by specify a matching criterion based on the properties (including relationships) defined by the system, or on filters defined by the system. If multiple filters are specified, they SHALL all be true. | ||||
Short | Select codes/concepts by their properties (including relationships) | ||||
Comments | Selecting codes by specifying filters based on properties is only possible where the underlying code system defines appropriate properties. Note that in some cases, the underlying code system defines the logical concepts but not the literal codes for the concepts. In such cases, the literal definitions may be provided by a third party. | ||||
Control | 0..* This element is affected by the following invariants: vsd-3 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
140. ValueSet.compose.include.filter.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
142. ValueSet.compose.include.filter.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
144. ValueSet.compose.include.filter.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
146. ValueSet.compose.include.filter.property | |||||
Definition | A code that identifies a property or a filter defined in the code system. | ||||
Short | A property/filter defined by the code system | ||||
Control | 1..1 | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
148. ValueSet.compose.include.filter.op | |||||
Definition | The kind of operation to perform as a part of the filter criteria. | ||||
Short | = | is-a | descendent-of | is-not-a | regex | in | not-in | generalizes | exists | ||||
Comments | In case filter.property represents a property of the system, the operation applies to the selected property. In case filter.property represents a filter of the system, the operation SHALL match one of the CodeSystem.filter.operator values. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from FilterOperator (required to http://hl7.org/fhir/ValueSet/filter-operator|4.0.1 )The kind of operation to perform as a part of a property based filter. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
150. ValueSet.compose.include.filter.value | |||||
Definition | The match value may be either a code defined by the system, or a string value, which is a regex match on the literal string of the property value (if the filter represents a property defined in CodeSystem) or of the system filter value (if the filter represents a filter defined in CodeSystem) when the operation is 'regex', or one of the values (true and false), when the operation is 'exists'. | ||||
Short | Code from the system, or regex criteria, or boolean value for exists | ||||
Comments | Use regex matching with care - full regex matching on every SNOMED CT term is prohibitive, for example. | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
152. ValueSet.compose.include.valueSet | |||||
Definition | Selects the concepts found in this value set (based on its value set definition). This is an absolute URI that is a reference to ValueSet.url. If multiple value sets are specified this includes the union of the contents of all of the referenced value sets. | ||||
Short | Select the contents included in this value set | ||||
Comments | The value set URI is either a logical reference to a defined value set such as a SNOMED CT reference set, or a direct reference to a value set definition using ValueSet.url. The reference might not refer to an actual FHIR ValueSet resource; in this case, whatever is referred to is an implicit definition of a value set that needs to be clear about how versions are resolved. | ||||
Control | 0..* This element is affected by the following invariants: vsd-1 | ||||
Type | canonical(ValueSet) | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
154. ValueSet.compose.exclude | |||||
Definition | Exclude one or more codes from the value set based on code system filters and/or other value sets. | ||||
Short | Explicitly exclude codes from a code system or other value sets | ||||
Comments | Usually this is used to selectively exclude codes that were included by subsumption in the inclusions. Any display names specified for the codes are ignored. | ||||
Control | 0..* This element is affected by the following invariants: vsd-2 | ||||
Type | Seettp://hl7.org/fhir/StructureDefinition/ValueSet#ValueSet.compose.include | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
156. ValueSet.expansion | |||||
Definition | A value set can also be "expanded", where the value set is turned into a simple collection of enumerated codes. This element holds the expansion, if it has been performed. | ||||
Short | Used when the value set is "expanded" | ||||
Comments | Expansion is performed to produce a collection of codes that are ready to use for data entry or validation. Value set expansions are always considered to be stateless - they are a record of the set of codes in the value set at a point in time under a given set of conditions, and are not subject to ongoing maintenance. Expansion.parameter is a simplified list of parameters - a subset of the features of the Parameters resource. | ||||
Control | 0..1 | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
158. ValueSet.expansion.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
160. ValueSet.expansion.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
162. ValueSet.expansion.extension:expansionSource | |||||
Slice Name | expansionSource | ||||
Definition | The logical URL of the ValueSet definition that was used to generate this expansion. | ||||
Short | ValueSet definition used to generate this expansion (logical URL) | ||||
Control | 0..1 | ||||
Type | Extension(ValueSet Expansion Source) (Extension Type: uri) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
164. ValueSet.expansion.extension:expansionProperty | |||||
Slice Name | expansionProperty | ||||
Definition | Optional Extension Element - found in all resources. | ||||
Short | Optional Extensions Element | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Extension Definition for ValueSet.expansion.property for Version 5.0) (Complex Extension) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Requirements | Allows support for itemWeight and other key properties | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
166. ValueSet.expansion.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
168. ValueSet.expansion.identifier | |||||
Definition | An identifier that uniquely identifies this expansion of the valueset, based on a unique combination of the provided parameters, the system default parameters, and the underlying system code system versions etc. Systems may re-use the same identifier as long as those factors remain the same, and the expansion is the same, but are not required to do so. This is a business identifier. | ||||
Short | Identifies the value set expansion (business identifier) | ||||
Comments | Typically, this uri is a UUID (e.g. urn:uuid:8230ff20-c97a-4167-a59d-dc2cb9df16dd). | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
170. ValueSet.expansion.timestamp | |||||
Definition | The time at which the expansion was produced by the expanding system. | ||||
Short | Time ValueSet expansion happened | ||||
Comments | This SHOULD be a fully populated instant, but in some circumstances, value sets are expanded by hand, and the expansion is published without that precision. | ||||
Control | 1..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
172. ValueSet.expansion.total | |||||
Definition | The total number of concepts in the expansion. If the number of concept nodes in this resource is less than the stated number, then the server can return more using the offset parameter. | ||||
Short | Total number of codes in the expansion | ||||
Comments | Paging only applies to flat expansions. | ||||
Control | 0..1 | ||||
Type | integer | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
174. ValueSet.expansion.offset | |||||
Definition | If paging is being used, the offset at which this resource starts. I.e. this resource is a partial view into the expansion. If paging is not being used, this element SHALL NOT be present. | ||||
Short | Offset at which this resource starts | ||||
Comments | Paging only applies to flat expansions. If a filter is applied, the count is the number of concepts that matched the filter, not the number of concepts in an unfiltered view of the expansion. | ||||
Control | 0..1 | ||||
Type | integer | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Meaning if Missing | Paging is not being used | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
176. ValueSet.expansion.parameter | |||||
Definition | A parameter that controlled the expansion process. These parameters may be used by users of expanded value sets to check whether the expansion is suitable for a particular purpose, or to pick the correct expansion. | ||||
Short | Parameter that controlled the expansion process | ||||
Comments | The server decides which parameters to include here, but at a minimum, the list SHOULD include all of the parameters that affect the $expand operation. If the expansion will be persisted all of these parameters SHALL be included. If the codeSystem on the server has a specified version then this version SHALL be provided as a parameter in the expansion (note that not all code systems have a version). | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
178. ValueSet.expansion.parameter.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
180. ValueSet.expansion.parameter.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
182. ValueSet.expansion.parameter.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
184. ValueSet.expansion.parameter.name | |||||
Definition | Name of the input parameter to the $expand operation; may be a server-assigned name for additional default or other server-supplied parameters used to control the expansion process. | ||||
Short | Name as assigned by the client or server | ||||
Comments | The names are assigned at the discretion of the server. | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
186. ValueSet.expansion.parameter.value[x] | |||||
Definition | The value of the parameter. | ||||
Short | Value of the named parameter | ||||
Control | 0..1 | ||||
Type | Choice of: string, boolean, integer, decimal, uri, code, dateTime | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
188. ValueSet.expansion.contains | |||||
Definition | The codes that are contained in the value set expansion. | ||||
Short | Codes in the value set | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )vsd-6: SHALL have a code or a display ( code.exists() or display.exists() )vsd-9: Must have a code if not abstract ( code.exists() or abstract = true )vsd-10: Must have a system if a code is present ( code.empty() or system.exists() ) | ||||
190. ValueSet.expansion.contains.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
192. ValueSet.expansion.contains.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
194. ValueSet.expansion.contains.extension:expansionLabel | |||||
Slice Name | expansionLabel | ||||
Definition | The label to list in front of a code when presenting a list of possible values in a questionnaire-like fashion. | ||||
Short | E.g. "(a)", "1.", etc. | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(ValueSet Label) (Extension Type: string) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
196. ValueSet.expansion.contains.extension:expansionLabel.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | id | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
198. ValueSet.expansion.contains.extension:expansionLabel.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
200. ValueSet.expansion.contains.extension:expansionLabel.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Short | identifies the meaning of the extension | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Control | 1..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/valueset-label | ||||
202. ValueSet.expansion.contains.extension:expansionLabel.value[x] | |||||
Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). | ||||
Short | Value of extension | ||||
Control | 1..1 This element is affected by the following invariants: ext-1 | ||||
Type | string | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
204. ValueSet.expansion.contains.extension:expansionLabel.value[x].id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Short | xml:id (or equivalent in JSON) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
206. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.extension.value[x].extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
208. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-renderingStyle | |||||
Slice Name | expansion-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
210. ValueSet.expansion.contains.extension:expansionLabel.value[x].extension:expansion-xhtml | |||||
Slice Name | expansion-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
212. ValueSet.expansion.contains.extension:expansionLabel.value[x].value | |||||
Definition | The actual value | ||||
Short | Primitive value for string | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Max Length: | 1048576 | ||||
214. ValueSet.expansion.contains.extension:conceptConceptOrder | |||||
Slice Name | conceptConceptOrder | ||||
Definition | Identifies the relative order in which concepts within the value set should be presented to a user. | ||||
Short | Appearance order for user selection | ||||
Comments | The presence of a sort order implies that sort order is important. | ||||
Control | 0..1 | ||||
Type | Extension(ValueSet Concept Order) (Extension Type: integer) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
216. ValueSet.expansion.contains.extension:containsProperty | |||||
Slice Name | containsProperty | ||||
Definition | Optional Extension Element - found in all resources. | ||||
Short | Optional Extensions Element | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Extension Definition for ValueSet.expansion.contains.property for Version 5.0) (Complex Extension) | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Requirements | Allows support for itemWeight and other key properties | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
218. ValueSet.expansion.contains.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
220. ValueSet.expansion.contains.system | |||||
Definition | An absolute URI which is the code system in which the code for this item in the expansion is defined. | ||||
Short | System value for the code | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
222. ValueSet.expansion.contains.abstract | |||||
Definition | If true, this entry is included in the expansion for navigational purposes, and the user cannot select the code directly as a proper value. | ||||
Short | If user cannot select this entry | ||||
Comments | This should not be understood to exclude its use for searching (e.g. by subsumption testing). The client should know whether it is appropriate for the user to select an abstract code or not. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Meaning if Missing | If this is not populated, systems can assume that the concept it not abstract. This SHALL always be populated for abstract concepts | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
224. ValueSet.expansion.contains.inactive | |||||
Definition | If the concept is inactive in the code system that defines it. Inactive codes are those that are no longer to be used, but are maintained by the code system for understanding legacy data. It might not be known or specified whether an concept is inactive (and it may depend on the context of use). | ||||
Short | If concept is inactive in the code system | ||||
Comments | This should only have a value if the concept is inactive. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
226. ValueSet.expansion.contains.version | |||||
Definition | The version of the code system from this code was taken. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. | ||||
Short | Version in which this code/display is defined | ||||
Comments | The exact value of the version string is specified by the system from which the code is derived. | ||||
Note | This is a business version Id, not a resource version Id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
228. ValueSet.expansion.contains.code | |||||
Definition | The code for this item in the expansion hierarchy. If this code is missing the entry in the hierarchy is a place holder (abstract) and does not represent a valid code in the value set. | ||||
Short | Code - if blank, this is not a selectable code | ||||
Control | 0..1 This element is affected by the following invariants: vsd-6 | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
230. ValueSet.expansion.contains.display | |||||
Definition | The recommended display for this item in the expansion. | ||||
Short | User display for the concept | ||||
Control | 0..1 This element is affected by the following invariants: vsd-6 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
232. ValueSet.expansion.contains.display.id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Short | xml:id (or equivalent in JSON) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
234. ValueSet.expansion.contains.display.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.display.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
236. ValueSet.expansion.contains.display.extension:expansionDisplay-renderingStyle | |||||
Slice Name | expansionDisplay-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
238. ValueSet.expansion.contains.display.extension:expansionDisplay-xhtml | |||||
Slice Name | expansionDisplay-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
240. ValueSet.expansion.contains.display.value | |||||
Definition | The actual value | ||||
Short | Primitive value for string | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Max Length: | 1048576 | ||||
242. ValueSet.expansion.contains.designation | |||||
Definition | Additional representations for this item - other languages, aliases, specialized purposes, used for particular purposes, etc. These are relevant when the conditions of the expansion do not fix to a single correct representation. | ||||
Short | Additional representations for this item | ||||
Comments | The designations provided must be based on the value set and code system definitions. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
244. ValueSet.expansion.contains.designation.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
246. ValueSet.expansion.contains.designation.extension | |||||
Definition | An Extension | ||||
Short | Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on ValueSet.expansion.contains.designation.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
248. ValueSet.expansion.contains.designation.extension:expansionDesignation-renderingStyle | |||||
Slice Name | expansionDesignation-renderingStyle | ||||
Definition | Identifies how the specified element should be rendered when displayed. | ||||
Short | Html style value | ||||
Comments | This extension would be equivalent to setting the HTML "style" attribute on the root element for the element containing the extension. For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(Rendering Style) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
250. ValueSet.expansion.contains.designation.extension:expansionDesignation-xhtml | |||||
Slice Name | expansionDesignation-xhtml | ||||
Definition | This is an equivalent of the string on which the extension is sent, but includes additional XHTML markup, such as bold, italics, styles, tables, etc. Existing restrictions on XHTML content apply. Note that using markdown allows for greater flexibility of display. | ||||
Short | String equivalent with html markup | ||||
Comments | For questionnaires, see additional guidance and examples in the SDC implementation guide. | ||||
Control | 0..1 | ||||
Type | Extension(XHTML Representation) (Extension Type: string) | ||||
Is Modifier | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
252. ValueSet.expansion.contains.designation.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored even if unrecognized | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
254. ValueSet.expansion.contains.designation.language | |||||
Definition | The language this designation is defined for. | ||||
Short | Human language of the designation | ||||
Comments | In the absence of a language, the resource language applies. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
256. ValueSet.expansion.contains.designation.use | |||||
Definition | A code that represents types of uses of designations. | ||||
Short | Types of uses of designations | ||||
Comments | If no use is provided, the designation can be assumed to be suitable for general display to a human user. | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from DesignationUse (extensible to http://hl7.org/fhir/ValueSet/designation-use )Details of how a designation would be used. | ||||
Type | Coding | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
258. ValueSet.expansion.contains.designation.value | |||||
Definition | The text value for this designation. | ||||
Short | The text value for this designation | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
260. ValueSet.expansion.contains.contains | |||||
Definition | Other codes and entries contained under this entry in the hierarchy. | ||||
Short | Codes contained under this entry | ||||
Comments | If the expansion uses this element, there is no implication about the logical relationship between them, and the structure cannot be used for logical inferencing. The structure exists to provide navigational assistance for helping human users to locate codes in the expansion. | ||||
Control | 0..* | ||||
Type | Seettp://hl7.org/fhir/StructureDefinition/ValueSet#ValueSet.expansion.contains | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |