This page is part of the Structured Data Capture FHIR IG (v4.0.0-ballot: STU 4 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 3.0.0. For a full list of available versions, see the Directory of published versions
Page standards status: Trial-use | Maturity Level: 4 |
Definitions for the sdc-library resource profile.
Guidance on how to interpret the contents of this table can be found here
0. Library | |
Definition | Sets expectations for SDC-conformant systems around use of libraries. |
2. Library.subject[x] | |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Must Support | true |
4. Library.relatedArtifact | |
Must Support | true |
6. Library.relatedArtifact.display | |
Control | 1..? |
Must Support | true |
8. Library.relatedArtifact.url | |
Control | 1..? |
Must Support | true |
10. Library.content | |
Must Support | true |
Slicing | This element introduces a set of slices on Library.content . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
12. Library.content:cqlContent | |
Slice Name | cqlContent |
Definition | The CQL content represented as base-64 encoded data. |
Short | CQL Content |
Control | 0..1 |
14. Library.content:cqlContent.contentType | |
Control | 1..? |
Must Support | true |
Pattern Value | text/cql |
16. Library.content:cqlContent.data | |
Control | 1..? |
18. Library.content:fhirpathContent | |
Slice Name | fhirpathContent |
Definition | The FHIRPath content represented as base-64 encoded data. |
Short | FHIRPath Content |
Control | 0..1 |
20. Library.content:fhirpathContent.contentType | |
Control | 1..? |
Must Support | true |
Pattern Value | text/fhirpath |
22. Library.content:fhirpathContent.data | |
Control | 1..? |
24. Library.content:queryContent | |
Slice Name | queryContent |
Definition | The query content represented as base-64 encoded data. |
Short | Query Content |
Control | 0..1 |
26. Library.content:queryContent.contentType | |
Control | 1..? |
Must Support | true |
Pattern Value | application/x-fhir-query |
28. Library.content:queryContent.data | |
Control | 1..? |
Guidance on how to interpret the contents of this table can be found here
0. Library | |
Definition | Sets expectations for SDC-conformant systems around use of libraries. The Library resource is a general-purpose container for knowledge asset definitions. It can be used to describe and expose existing knowledge assets such as logic libraries and information model descriptions, as well as to describe a collection of knowledge assets. |
Short | Represents a library of quality improvement components |
Control | 10..1* |
Is Modifier | false |
Summary | false |
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists()) lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation ( name.matches('[A-Z]([A-Za-z0-9_]){0,254}') )lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation (name.matches('[A-Z]([A-Za-z0-9_]){0,254}')) |
2. Library.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Short | A set of rules under which this content was created |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
4. Library.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Short | Extensions that cannot be ignored |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Control | 0..* |
Type | Extension |
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
6. Library.status | |
Definition | The status of this library. Enables tracking the life-cycle of the content. |
Short | draft | active | retired | unknown |
Comments | Allows filtering of libraries that are appropriate for use vs. not. |
Control | 1..1 |
Binding | The codes SHALL be taken from PublicationStatushttp://hl7.org/fhir/ValueSet/publication-status|4.0.1 (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1 )The lifecycle status of an artifact. |
Type | code |
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
8. Library.type | |
Definition | Identifies the type of library such as a Logic Library, Model Definition, Asset Collection, or Module Definition. |
Short | logic-library | model-definition | asset-collection | module-definition |
Control | 1..1 |
Binding | Unless not suitable, these codes SHALL be taken from LibraryTypehttp://hl7.org/fhir/ValueSet/library-type (extensible to http://hl7.org/fhir/ValueSet/library-type )The type of knowledge asset this library contains. |
Type | CodeableConcept |
Is Modifier | false |
Summary | true |
Fixed Value | { |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
10. Library.subject[x] | |
Definition | A code or group definition that describes the intended subject of the contents of the library. |
Short | Type of individual the library content is focused on |
Control | 0..1 |
Binding | Unless not suitable, these codes SHALL be taken from SubjectTypehttp://hl7.org/fhir/ValueSet/subject-type (extensible to http://hl7.org/fhir/ValueSet/subject-type )The possible types of subjects for a library (E.g. Patient, Practitioner, Organization, Location, etc.). |
Type | Choice of: CodeableConcept, Reference(Group) |
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
Is Modifier | false |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | false |
Meaning if Missing | Patient |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
12. Library.relatedArtifact | |
Definition | Related artifacts such as additional documentation, justification, or bibliographic references. |
Short | Additional documentation, citations, etc. |
Comments | Each related artifact is either an attachment, or a reference to another resource, but not both. |
Control | 0..* |
Type | RelatedArtifact |
Is Modifier | false |
Must Support | true |
Summary | false |
Requirements | Libraries must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
14. Library.relatedArtifact.type | |
Definition | The type of relationship to the related artifact. |
Short | documentation | justification | citation | predecessor | successor | derived-from | depends-on | composed-of |
Control | 1..1 |
Binding | The codes SHALL be taken from RelatedArtifactTypehttp://hl7.org/fhir/ValueSet/related-artifact-type|4.0.1 (required to http://hl7.org/fhir/ValueSet/related-artifact-type|4.0.1 )The type of relationship to the related artifact. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
16. Library.relatedArtifact.display | |
Definition | A brief description of the document or knowledge resource being referenced, suitable for display to a consumer. |
Short | Brief description of the related artifact |
Control | 10..1 |
Type | string |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
18. Library.relatedArtifact.url | |
Definition | A url for the artifact that can be followed to access the actual content. |
Short | Where the artifact can be accessed |
Comments | If a document or resource element is present, this element SHALL NOT be provided (use the url or reference in the Attachment or resource reference). |
Control | 10..1 |
Type | url |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
20. Library.parameter | |
Definition | The parameter element defines parameters used by the library. |
Short | Parameters defined by the library |
Control | 0..* |
Type | ParameterDefinition |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
22. Library.dataRequirement | |
Definition | Describes a set of data that must be provided in order to be able to successfully perform the computations defined by the library. |
Short | What data is referenced by this library |
Control | 0..* |
Type | DataRequirement |
Is Modifier | false |
Must Support | true |
Summary | false |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
24. Library.content | |
Definition | The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content. |
Short | Contents of the library, either embedded or referenced |
Control | 0..* |
Type | Attachment |
Is Modifier | false |
Must Support | true |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Slicing | This element introduces a set of slices on Library.content . The slices areUnordered and Open, and can be differentiated using the following discriminators: |
26. Library.content:cqlContent | |
Slice Name | cqlContent |
Definition | The CQL content represented as base-64 encoded data. The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content. |
Short | CQL ContentContents of the library, either embedded or referenced |
Control | 0..1* |
Type | Attachment |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
28. Library.content:cqlContent.contentType | |
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. |
Short | Mime type of the content, with charset etc. |
Control | 10..1 |
Binding | The codes SHALL be taken from Mime Typeshttp://hl7.org/fhir/ValueSet/mimetypes|4.0.1 (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Processors of the data need to be able to know how to interpret the data. |
Pattern Value | text/cql |
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
30. Library.content:cqlContent.data | |
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. |
Short | Data inline, base64ed |
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. |
Control | 10..1 |
Type | base64Binary |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Requirements | The data needs to able to be transmitted inline. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
32. Library.content:fhirpathContent | |
Slice Name | fhirpathContent |
Definition | The FHIRPath content represented as base-64 encoded data. The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content. |
Short | FHIRPath ContentContents of the library, either embedded or referenced |
Control | 0..1* |
Type | Attachment |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
34. Library.content:fhirpathContent.contentType | |
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. |
Short | Mime type of the content, with charset etc. |
Control | 10..1 |
Binding | The codes SHALL be taken from Mime Typeshttp://hl7.org/fhir/ValueSet/mimetypes|4.0.1 (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Processors of the data need to be able to know how to interpret the data. |
Pattern Value | text/fhirpath |
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
36. Library.content:fhirpathContent.data | |
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. |
Short | Data inline, base64ed |
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. |
Control | 10..1 |
Type | base64Binary |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Requirements | The data needs to able to be transmitted inline. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
38. Library.content:queryContent | |
Slice Name | queryContent |
Definition | The query content represented as base-64 encoded data. The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content. |
Short | Query ContentContents of the library, either embedded or referenced |
Control | 0..1* |
Type | Attachment |
Is Modifier | false |
Summary | true |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
40. Library.content:queryContent.contentType | |
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. |
Short | Mime type of the content, with charset etc. |
Control | 10..1 |
Binding | The codes SHALL be taken from Mime Typeshttp://hl7.org/fhir/ValueSet/mimetypes|4.0.1 (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. |
Type | code |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Must Support | true |
Summary | true |
Requirements | Processors of the data need to be able to know how to interpret the data. |
Pattern Value | application/x-fhir-query |
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
42. Library.content:queryContent.data | |
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. |
Short | Data inline, base64ed |
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. |
Control | 10..1 |
Type | base64Binary |
Is Modifier | false |
Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Summary | false |
Requirements | The data needs to able to be transmitted inline. |
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here
0. Library | |||||
Definition | Sets expectations for SDC-conformant systems around use of libraries. | ||||
Short | Represents a library of quality improvement components | ||||
Control | 1..1 | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty() )dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource ( contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty() )dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated ( contained.meta.versionId.empty() and contained.meta.lastUpdated.empty() )dom-5: If a resource is contained in another resource, it SHALL NOT have a security label ( contained.meta.security.empty() )dom-6: A resource should have narrative for robust management ( text.`div`.exists() )lib-0: Name should be usable as an identifier for the module by machine processing applications such as code generation ( name.matches('[A-Z]([A-Za-z0-9_]){0,254}') ) | ||||
2. Library.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Short | Logical id of this artifact | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
Control | 0..1 | ||||
Type | id | ||||
Is Modifier | false | ||||
Summary | true | ||||
4. Library.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Short | Metadata about the resource | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
6. Library.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Short | A set of rules under which this content was created | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
8. Library.language | |||||
Definition | The base language in which the resource is written. | ||||
Short | Language of the resource content | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
10. Library.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Short | Text summary of the resource, for human interpretation | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
12. Library.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Short | Contained, inline Resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
14. Library.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
16. Library.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Short | Extensions that cannot be ignored | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
18. Library.url | |||||
Definition | An absolute URI that is used to identify this library when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this library is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the library is stored on different servers. | ||||
Short | Canonical identifier for this library, represented as a URI (globally unique) | ||||
Comments | Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version. The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Allows the library to be referenced by a single globally unique identifier. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
20. Library.identifier | |||||
Definition | A formal identifier that is used to identify this library when it is represented in other formats, or referenced in a specification, model, design or an instance. e.g. CMS or NQF identifiers for a measure artifact. Note that at least one identifier is required for non-experimental active artifacts. | ||||
Short | Additional identifier for the library | ||||
Comments | Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this library outside of FHIR, where it is not possible to use the logical URI. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..* | ||||
Type | Identifier | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Allows externally provided and/or usable business identifiers to be easily associated with the module. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
22. Library.version | |||||
Definition | The identifier that is used to identify this version of the library when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the library author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active artifacts. | ||||
Short | Business version of the library | ||||
Comments | There may be different library instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the library with the format [url]|[version]. | ||||
Note | This is a business version Id, not a resource version Id (see discussion) | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
24. Library.name | |||||
Definition | A natural language name identifying the library. This name should be usable as an identifier for the module by machine processing applications such as code generation. | ||||
Short | Name for this library (computer friendly) | ||||
Comments | The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly. | ||||
Control | 0..1 This element is affected by the following invariants: inv-0 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Support human navigation and code generation. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
26. Library.title | |||||
Definition | A short, descriptive, user-friendly title for the library. | ||||
Short | Name for this library (human friendly) | ||||
Comments | This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
28. Library.subtitle | |||||
Definition | An explanatory or alternate title for the library giving additional information about its content. | ||||
Short | Subordinate title of the library | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
30. Library.status | |||||
Definition | The status of this library. Enables tracking the life-cycle of the content. | ||||
Short | draft | active | retired | unknown | ||||
Comments | Allows filtering of libraries that are appropriate for use vs. not. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from PublicationStatus (required to http://hl7.org/fhir/ValueSet/publication-status|4.0.1 )The lifecycle status of an artifact. | ||||
Type | code | ||||
Is Modifier | true because This is labeled as "Is Modifier" because applications should not use a retired {{title}} without due consideration | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
32. Library.experimental | |||||
Definition | A Boolean value to indicate that this library is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage. | ||||
Short | For testing purposes, not real usage | ||||
Comments | Allows filtering of librarys that are appropriate for use versus not. | ||||
Control | 0..1 | ||||
Type | boolean | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Enables experimental content to be developed following the same lifecycle that would be used for a production-level library. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
34. Library.type | |||||
Definition | Identifies the type of library such as a Logic Library, Model Definition, Asset Collection, or Module Definition. | ||||
Short | logic-library | model-definition | asset-collection | module-definition | ||||
Control | 1..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from LibraryType (extensible to http://hl7.org/fhir/ValueSet/library-type )The type of knowledge asset this library contains. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Fixed Value | { | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
36. Library.subject[x] | |||||
Definition | A code or group definition that describes the intended subject of the contents of the library. | ||||
Short | Type of individual the library content is focused on | ||||
Control | 0..1 | ||||
Binding | Unless not suitable, these codes SHALL be taken from SubjectType (extensible to http://hl7.org/fhir/ValueSet/subject-type )The possible types of subjects for a library (E.g. Patient, Practitioner, Organization, Location, etc.). | ||||
Type | Choice of: CodeableConcept, Reference(Group) | ||||
[x] Note | SeeChoice of Data Typesfor further information about how to use [x] | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | false | ||||
Meaning if Missing | Patient | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
38. Library.date | |||||
Definition | The date (and optionally time) when the library was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the library changes. | ||||
Short | Date last changed | ||||
Comments | Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the library. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Alternate Names | Revision Date | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
40. Library.publisher | |||||
Definition | The name of the organization or individual that published the library. | ||||
Short | Name of the publisher (organization or individual) | ||||
Comments | Usually an organization but may be an individual. The publisher (or steward) of the library is the organization or individual primarily responsible for the maintenance and upkeep of the library. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the library. This item SHOULD be populated unless the information is available from context. | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Helps establish the "authority/credibility" of the library. May also allow for contact. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
42. Library.contact | |||||
Definition | Contact details to assist a user in finding and communicating with the publisher. | ||||
Short | Contact details for the publisher | ||||
Comments | May be a web site, an email address, a telephone number, etc. | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
44. Library.description | |||||
Definition | A free text natural language description of the library from a consumer's perspective. | ||||
Short | Natural language description of the library | ||||
Comments | This description can be used to capture details such as why the library was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the library as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the library is presumed to be the predominant language in the place the library was created). | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
46. Library.useContext | |||||
Definition | The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate library instances. | ||||
Short | The context that the content is intended to support | ||||
Comments | When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. | ||||
Control | 0..* | ||||
Type | UsageContext | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Assist in searching for appropriate content. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
48. Library.jurisdiction | |||||
Definition | A legal or geographic region in which the library is intended to be used. | ||||
Short | Intended jurisdiction for library (if applicable) | ||||
Comments | It may be possible for the library to be used in jurisdictions other than those for which it was originally designed or intended. | ||||
Control | 0..* | ||||
Binding | Unless not suitable, these codes SHALL be taken from Jurisdiction ValueSet (extensible to http://hl7.org/fhir/ValueSet/jurisdiction )Countries and regions within which this artifact is targeted for use. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
50. Library.purpose | |||||
Definition | Explanation of why this library is needed and why it has been designed as it has. | ||||
Short | Why this library is defined | ||||
Comments | This element does not describe the usage of the library. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this library. | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
52. Library.usage | |||||
Definition | A detailed description of how the library is used from a clinical perspective. | ||||
Short | Describes the clinical usage of the library | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
54. Library.copyright | |||||
Definition | A copyright statement relating to the library and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the library. | ||||
Short | Use and/or publishing restrictions | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Consumers must be able to determine any legal restrictions on the use of the library and/or its content. | ||||
Alternate Names | License, Restrictions | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
56. Library.approvalDate | |||||
Definition | The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage. | ||||
Short | When the library was approved by publisher | ||||
Comments | The 'date' element may be more recent than the approval date because of minor changes or editorial corrections. | ||||
Control | 0..1 | ||||
Type | date | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
58. Library.lastReviewDate | |||||
Definition | The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date. | ||||
Short | When the library was last reviewed | ||||
Comments | If specified, this date follows the original approval date. | ||||
Control | 0..1 | ||||
Type | date | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
60. Library.effectivePeriod | |||||
Definition | The period during which the library content was or is planned to be in active use. | ||||
Short | When the library is expected to be used | ||||
Comments | The effective period for a library determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015. | ||||
Control | 0..1 | ||||
Type | Period | ||||
Is Modifier | false | ||||
Summary | true | ||||
Requirements | Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the library are or are expected to be used instead. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
62. Library.topic | |||||
Definition | Descriptive topics related to the content of the library. Topics provide a high-level categorization of the library that can be useful for filtering and searching. | ||||
Short | E.g. Education, Treatment, Assessment, etc. | ||||
Control | 0..* | ||||
Binding | For example codes, see DefinitionTopic (example to http://hl7.org/fhir/ValueSet/definition-topic )High-level categorization of the definition, used for searching, sorting, and filtering. | ||||
Type | CodeableConcept | ||||
Is Modifier | false | ||||
Summary | false | ||||
Requirements | Repositories must be able to determine how to categorize the library so that it can be found by topical searches. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
64. Library.author | |||||
Definition | An individiual or organization primarily involved in the creation and maintenance of the content. | ||||
Short | Who authored the content | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
66. Library.editor | |||||
Definition | An individual or organization primarily responsible for internal coherence of the content. | ||||
Short | Who edited the content | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
68. Library.reviewer | |||||
Definition | An individual or organization primarily responsible for review of some aspect of the content. | ||||
Short | Who reviewed the content | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
70. Library.endorser | |||||
Definition | An individual or organization responsible for officially endorsing the content for use in some setting. | ||||
Short | Who endorsed the content | ||||
Control | 0..* | ||||
Type | ContactDetail | ||||
Is Modifier | false | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
72. Library.relatedArtifact | |||||
Definition | Related artifacts such as additional documentation, justification, or bibliographic references. | ||||
Short | Additional documentation, citations, etc. | ||||
Comments | Each related artifact is either an attachment, or a reference to another resource, but not both. | ||||
Control | 0..* | ||||
Type | RelatedArtifact | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Libraries must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
74. Library.relatedArtifact.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
76. Library.relatedArtifact.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Library.relatedArtifact.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
78. Library.relatedArtifact.type | |||||
Definition | The type of relationship to the related artifact. | ||||
Short | documentation | justification | citation | predecessor | successor | derived-from | depends-on | composed-of | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from RelatedArtifactType (required to http://hl7.org/fhir/ValueSet/related-artifact-type|4.0.1 )The type of relationship to the related artifact. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
80. Library.relatedArtifact.label | |||||
Definition | A short label that can be used to reference the citation from elsewhere in the containing artifact, such as a footnote index. | ||||
Short | Short label | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
82. Library.relatedArtifact.display | |||||
Definition | A brief description of the document or knowledge resource being referenced, suitable for display to a consumer. | ||||
Short | Brief description of the related artifact | ||||
Control | 1..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
84. Library.relatedArtifact.citation | |||||
Definition | A bibliographic citation for the related artifact. This text SHOULD be formatted according to an accepted citation format. | ||||
Short | Bibliographic citation for the artifact | ||||
Comments | Additional structured information about citations should be captured as extensions. | ||||
Control | 0..1 | ||||
Type | markdown | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
86. Library.relatedArtifact.url | |||||
Definition | A url for the artifact that can be followed to access the actual content. | ||||
Short | Where the artifact can be accessed | ||||
Comments | If a document or resource element is present, this element SHALL NOT be provided (use the url or reference in the Attachment or resource reference). | ||||
Control | 1..1 | ||||
Type | url | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
88. Library.relatedArtifact.document | |||||
Definition | The document being referenced, represented as an attachment. This is exclusive with the resource element. | ||||
Short | What document is being referenced | ||||
Control | 0..1 | ||||
Type | Attachment | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
90. Library.relatedArtifact.resource | |||||
Definition | The related resource, such as a library, value set, profile, or other knowledge resource. | ||||
Short | What resource is being referenced | ||||
Comments | If the type is predecessor, this is a reference to the succeeding knowledge resource. If the type is successor, this is a reference to the prior knowledge resource. | ||||
Control | 0..1 | ||||
Type | canonical(Resource) | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
92. Library.parameter | |||||
Definition | The parameter element defines parameters used by the library. | ||||
Short | Parameters defined by the library | ||||
Control | 0..* | ||||
Type | ParameterDefinition | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
94. Library.dataRequirement | |||||
Definition | Describes a set of data that must be provided in order to be able to successfully perform the computations defined by the library. | ||||
Short | What data is referenced by this library | ||||
Control | 0..* | ||||
Type | DataRequirement | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | false | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
96. Library.content | |||||
Definition | The content of the library as an Attachment. The content may be a reference to a url, or may be directly embedded as a base-64 string. Either way, the contentType of the attachment determines how to interpret the content. | ||||
Short | Contents of the library, either embedded or referenced | ||||
Control | 0..* | ||||
Type | Attachment | ||||
Is Modifier | false | ||||
Must Support | true | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
Slicing | This element introduces a set of slices on Library.content . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
98. Library.content:cqlContent | |||||
Slice Name | cqlContent | ||||
Definition | The CQL content represented as base-64 encoded data. | ||||
Short | CQL Content | ||||
Control | 0..1 | ||||
Type | Attachment | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
100. Library.content:cqlContent.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
102. Library.content:cqlContent.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Library.content.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
104. Library.content:cqlContent.contentType | |||||
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. | ||||
Short | Mime type of the content, with charset etc. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Mime Types (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Processors of the data need to be able to know how to interpret the data. | ||||
Pattern Value | text/cql | ||||
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
106. Library.content:cqlContent.language | |||||
Definition | The human language of the content. The value can be any valid value according to BCP 47. | ||||
Short | Human language of the content (BCP-47) | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Users need to be able to choose between the languages in a set of attachments. | ||||
Example | <br/><b>General</b>:en-AU | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
108. Library.content:cqlContent.data | |||||
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. | ||||
Short | Data inline, base64ed | ||||
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. | ||||
Control | 1..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | The data needs to able to be transmitted inline. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
110. Library.content:cqlContent.url | |||||
Definition | A location where the data can be accessed. | ||||
Short | Uri where the data can be found | ||||
Comments | If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data. | ||||
Control | 0..1 | ||||
Type | url | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The data needs to be transmitted by reference. | ||||
Example | <br/><b>General</b>:http://www.acme.com/logo-small.png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
112. Library.content:cqlContent.size | |||||
Definition | The number of bytes of data that make up this attachment (before base64 encoding, if that is done). | ||||
Short | Number of bytes of content (if url provided) | ||||
Comments | The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference. | ||||
Control | 0..1 | ||||
Type | unsignedInt | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
114. Library.content:cqlContent.hash | |||||
Definition | The calculated hash of the data using SHA-1. Represented using base64. | ||||
Short | Hash of the data (sha-1, base64ed) | ||||
Comments | The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature. | ||||
Control | 0..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
116. Library.content:cqlContent.title | |||||
Definition | A label or set of text to display in place of the data. | ||||
Short | Label to display in place of the data | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer. | ||||
Example | <br/><b>General</b>:Official Corporate Logo | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
118. Library.content:cqlContent.creation | |||||
Definition | The date that the attachment was first created. | ||||
Short | Date attachment was first created | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | This is often tracked as an integrity issue for use of the attachment. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
120. Library.content:fhirpathContent | |||||
Slice Name | fhirpathContent | ||||
Definition | The FHIRPath content represented as base-64 encoded data. | ||||
Short | FHIRPath Content | ||||
Control | 0..1 | ||||
Type | Attachment | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
122. Library.content:fhirpathContent.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
124. Library.content:fhirpathContent.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Library.content.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
126. Library.content:fhirpathContent.contentType | |||||
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. | ||||
Short | Mime type of the content, with charset etc. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Mime Types (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Processors of the data need to be able to know how to interpret the data. | ||||
Pattern Value | text/fhirpath | ||||
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
128. Library.content:fhirpathContent.language | |||||
Definition | The human language of the content. The value can be any valid value according to BCP 47. | ||||
Short | Human language of the content (BCP-47) | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Users need to be able to choose between the languages in a set of attachments. | ||||
Example | <br/><b>General</b>:en-AU | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
130. Library.content:fhirpathContent.data | |||||
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. | ||||
Short | Data inline, base64ed | ||||
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. | ||||
Control | 1..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | The data needs to able to be transmitted inline. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
132. Library.content:fhirpathContent.url | |||||
Definition | A location where the data can be accessed. | ||||
Short | Uri where the data can be found | ||||
Comments | If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data. | ||||
Control | 0..1 | ||||
Type | url | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The data needs to be transmitted by reference. | ||||
Example | <br/><b>General</b>:http://www.acme.com/logo-small.png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
134. Library.content:fhirpathContent.size | |||||
Definition | The number of bytes of data that make up this attachment (before base64 encoding, if that is done). | ||||
Short | Number of bytes of content (if url provided) | ||||
Comments | The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference. | ||||
Control | 0..1 | ||||
Type | unsignedInt | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
136. Library.content:fhirpathContent.hash | |||||
Definition | The calculated hash of the data using SHA-1. Represented using base64. | ||||
Short | Hash of the data (sha-1, base64ed) | ||||
Comments | The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature. | ||||
Control | 0..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
138. Library.content:fhirpathContent.title | |||||
Definition | A label or set of text to display in place of the data. | ||||
Short | Label to display in place of the data | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer. | ||||
Example | <br/><b>General</b>:Official Corporate Logo | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
140. Library.content:fhirpathContent.creation | |||||
Definition | The date that the attachment was first created. | ||||
Short | Date attachment was first created | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | This is often tracked as an integrity issue for use of the attachment. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
142. Library.content:queryContent | |||||
Slice Name | queryContent | ||||
Definition | The query content represented as base-64 encoded data. | ||||
Short | Query Content | ||||
Control | 0..1 | ||||
Type | Attachment | ||||
Is Modifier | false | ||||
Summary | true | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
144. Library.content:queryContent.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Short | Unique id for inter-element referencing | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
XML Format | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
146. Library.content:queryContent.extension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. | ||||
Short | Additional content defined by implementations | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | false | ||||
Summary | false | ||||
Alternate Names | extensions, user content | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) )ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists() ) | ||||
Slicing | This element introduces a set of slices on Library.content.extension . The slices areUnordered and Open, and can be differentiated using the following discriminators: | ||||
148. Library.content:queryContent.contentType | |||||
Definition | Identifies the type of the data in the attachment and allows a method to be chosen to interpret or render the data. Includes mime type parameters such as charset where appropriate. | ||||
Short | Mime type of the content, with charset etc. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from Mime Types (required to http://hl7.org/fhir/ValueSet/mimetypes|4.0.1 )The mime type of an attachment. Any valid mime type is allowed. | ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Processors of the data need to be able to know how to interpret the data. | ||||
Pattern Value | application/x-fhir-query | ||||
Example | <br/><b>General</b>:text/plain; charset=UTF-8, image/png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
150. Library.content:queryContent.language | |||||
Definition | The human language of the content. The value can be any valid value according to BCP 47. | ||||
Short | Human language of the content (BCP-47) | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages (preferred to http://hl7.org/fhir/ValueSet/languages )A human language.
| ||||
Type | code | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Users need to be able to choose between the languages in a set of attachments. | ||||
Example | <br/><b>General</b>:en-AU | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
152. Library.content:queryContent.data | |||||
Definition | The actual data of the attachment - a sequence of bytes, base64 encoded. | ||||
Short | Data inline, base64ed | ||||
Comments | The base64-encoded data SHALL be expressed in the same character set as the base resource XML or JSON. | ||||
Control | 1..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | false | ||||
Requirements | The data needs to able to be transmitted inline. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
154. Library.content:queryContent.url | |||||
Definition | A location where the data can be accessed. | ||||
Short | Uri where the data can be found | ||||
Comments | If both data and url are provided, the url SHALL point to the same content as the data contains. Urls may be relative references or may reference transient locations such as a wrapping envelope using cid: though this has ramifications for using signatures. Relative URLs are interpreted relative to the service url, like a resource reference, rather than relative to the resource itself. If a URL is provided, it SHALL resolve to actual data. | ||||
Control | 0..1 | ||||
Type | url | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | The data needs to be transmitted by reference. | ||||
Example | <br/><b>General</b>:http://www.acme.com/logo-small.png | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
156. Library.content:queryContent.size | |||||
Definition | The number of bytes of data that make up this attachment (before base64 encoding, if that is done). | ||||
Short | Number of bytes of content (if url provided) | ||||
Comments | The number of bytes is redundant if the data is provided as a base64binary, but is useful if the data is provided as a url reference. | ||||
Control | 0..1 | ||||
Type | unsignedInt | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Representing the size allows applications to determine whether they should fetch the content automatically in advance, or refuse to fetch it at all. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
158. Library.content:queryContent.hash | |||||
Definition | The calculated hash of the data using SHA-1. Represented using base64. | ||||
Short | Hash of the data (sha-1, base64ed) | ||||
Comments | The hash is calculated on the data prior to base64 encoding, if the data is based64 encoded. The hash is not intended to support digital signatures. Where protection against malicious threats a digital signature should be considered, see Provenance.signature for mechanism to protect a resource with a digital signature. | ||||
Control | 0..1 | ||||
Type | base64Binary | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Included so that applications can verify that the contents of a location have not changed due to technical failures (e.g., storage rot, transport glitch, incorrect version). | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
160. Library.content:queryContent.title | |||||
Definition | A label or set of text to display in place of the data. | ||||
Short | Label to display in place of the data | ||||
Control | 0..1 | ||||
Type | string | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | Applications need a label to display to a human user in place of the actual data if the data cannot be rendered or perceived by the viewer. | ||||
Example | <br/><b>General</b>:Official Corporate Logo | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) | ||||
162. Library.content:queryContent.creation | |||||
Definition | The date that the attachment was first created. | ||||
Short | Date attachment was first created | ||||
Control | 0..1 | ||||
Type | dateTime | ||||
Is Modifier | false | ||||
Primitive Value | This primitive element may be present, or absent, or replaced by an extension | ||||
Summary | true | ||||
Requirements | This is often tracked as an integrity issue for use of the attachment. | ||||
Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()) ) |