Personal Health Device Implementation Guide
1.1.0 - STU 1.1 International flag

This page is part of the Personal Health Device FHIR IG (v1.1.0: STU 1) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Terminology

Terminology

The ISO/IEEE 11073-10101 Nomenclature standard (11073 MDC) provides a comprehensive terminology for device models according to the ISO/IEEE 11073-10201 and 11073-20601 Domain information models (DIM). It is the required code system for profiles in this implementation guide. Other additional coding systems expressing the same concepts may also be used. Reference identifiers, terminology codes, and descriptions are available at the Rosetta Terminology Mapping Management System (RTMMS).

The PHD profiles define rules for terminology usage:

  • Device.specializations shall have a coding from the 11073 MDC Infra partition describing the device specializations and sub-profile standards the PHD conforms to. As the specialization elements are of type CodeableConcept there can be additional codings from other code systems.

The Vital Signs Profile, which is part of FHIR core specification, applies for some commonly used measurement observations (e. g., heart rate, blood pressure, respiratory rate, oxygen saturation, body temperature). The main impact this core requirement imposes on the PHD profiles is that for measurements that are considered vital signs, the LOINC code for that vital sign must be present.

Consequently for vital signs measurements the Observation.code and, for compound metrics, the Observation.component.code elements must contain a matching LOINC code in addition to the required 11073 MDC code.

The Vital Signs Profile also specifies that the Quantity data type in Observation.value[x] and Observation.component.value[x] contains the units of measure which shall be UCUM. The PHD profiles extends this requirement for all measurements that are of type Quantity, with the exception of rare cases where no UCUM code is defined. ### Code Systems

11073 ASN1 Event Or State

Code system for ASN1ToHL7 state or event property

ASN1 bits to HL7 enumerated values

Maps IEEE 11073 ASN1 BITS measurements to codes. All these codes have two possible values, set or cleared. The code may either represent an event or a state. When an event, the defined event has occurred when set. If a state, the described item is either set or cleared. Sometimes the states may be defined in unexpected manners. For example, the regulation state when set is unregulated and when cleared it is regulated. In addition the code may derive from an IEEE 11073 attribute or from a measurement. More codes maybe added to this list in the future.

Continua Device Identifiers

Codes used to describe the Device (PHD or PHG) Identifiers, such as the system id or Bluetooth Address. More codes maybe added to this list in the future.

Continua Health and Fitness Continua Service Interfaces

Codes used to describe the Continua Health and Fitness interfaces supported by a Personal Health Gateway. More codes maybe added to this list in the future.

Continua Device Interfaces

Codes used to describe the Continua Personal Area Network (PHD) interfaces supported by a Personal Health Gateway. More codes maybe added to this list in the future.

PHD Observation Categories Code System

Codes used for tagging observations coming from PHD devices. More codes maybe added to this list in the future.

### Value Sets
ANS1ToHL7 codes defined for non-measurement attributes

ValueSet for the ANS1ToHL7 codes that are not derived from enumeration measurements.

ANS1ToHL7 codes defined for measurement attributes

ValueSet for the ANS1ToHL7 codes that are derived from enumeration measurements.

CodeableConcept 11073 Attributes

ValueSet for the ISO/IEEE 11073-10101 Nomenclatures Describing 11073-20601 attributes whose values are codes and thus represented as Codeable Concepts.

Device System Id Identifier

ValueSet for the Codes describing the type of device identifier, such as a system id or Bluetooth address.

Device Transport Address Identifiers

ValueSet for the Codes describing the type of device transport identifier, such the Bluetooth address.

Device Type Specialization IEEE 11073-10101 Nomenclature Codes

ValueSet for the ISO/IEEE 11073-10101 Nomenclatures Describing Device specialization types such as blood pressure, pulse oximeter, thermometer, ecg, etc.. Nomenclature codes are 32-bit numbers where the upper 16 bits represent the partition and the lower 16 bits represent the term code. Most of the codes included in this value set are from partition infra which has value 8. THe 32-bit code for the pulse oximeter, which has term code 4100 in partition infra, is given by 524288 + 4100 = 528388. This value set will grow as new specializations are defined. The display value consists of the nomenclature code's reference identifier. Devices exchange the numerical codes in the IEEE 11073 communication standards, not reference identifiers, but the reference identifiers are often used where human readability are more important than efficiency or bandwidth. However, only the numerical codes are guaranteed to be unique.

11073 MDC Non-Object codes

ValueSet for the ISO/IEEE 11073-10101 Nomenclature excluding Object partition.

IEEE 11073 MDC Object infrastructure and Device nomenclature

ValueSet for the ISO/IEEE 11073-10101 Nomenclature filtered by Object partition.

Quantity 11073 Attributes

ValueSet for the ISO/IEEE 11073-10101 Nomenclatures Describing 11073-20601 attributes whose values are Quantities.

Range 11073 Attributes

ValueSet for the ISO/IEEE 11073-10101 Nomenclatures Describing 11073-20601 attributes whose values are Ranges.

String 11073 Attributes

ValueSet for the ISO/IEEE 11073-10101 Nomenclatures Describing 11073-20601 attributes whose values are Strings.