Vital Records Common Library (VRCL) FHIR Implementation Guide
2.0.0 - STU2 United States of America flag

This page is part of the Vital Records Common Profile Library (v2.0.0: STU2) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: LocationVitalRecords - Detailed Descriptions

Active as of 2024-10-11

Definitions for the Location-vr resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Location
2. Location.name
ShortName of Location
4. Location.type
ShortType is used to differentiate profiles of this abstract profile
6. Location.address
ShortAddress
8. Location.address.extension:predir
Slice Namepredir
Control0..1
TypeExtension(PreDirectional Vital Records) (Extension Type: string)
10. Location.address.extension:stnum
Slice Namestnum
Control0..1
TypeExtension(StreetNumber Vital Records) (Extension Type: string)
12. Location.address.extension:stname
Slice Namestname
Control0..1
TypeExtension(StreetName Vital Records) (Extension Type: string)
14. Location.address.extension:stdesig
Slice Namestdesig
Control0..1
TypeExtension(StreetDesignator Vital Records) (Extension Type: string)
16. Location.address.extension:postdir
Slice Namepostdir
Control0..1
TypeExtension(PostDirectional Vital Records) (Extension Type: string)
18. Location.address.extension:unitnumber
Slice Nameunitnumber
Control0..1
TypeExtension(UnitOrAptNumber Vital Records) (Extension Type: string)
20. Location.address.line
ShortAddress text
22. Location.address.city
ShortAddress city
24. Location.address.city.extension
SlicingThis element introduces a set of slices on Location.address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 26. Location.address.city.extension:cityCode
    Slice NamecityCode
    Definition

    Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

    ShortCity Code
    Control0..1
    TypeExtension(City Code Vital Records) (Extension Type: positiveInt)
    LabelCity Code
    28. Location.address.district
    ShortAddress county
    30. Location.address.district.extension
    SlicingThis element introduces a set of slices on Location.address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 32. Location.address.district.extension:districtCode
      Slice NamedistrictCode
      Definition

      Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

      ShortCounty code
      Control0..1
      TypeExtension(District Code Vital Records) (Extension Type: positiveInt)
      LabelCounty code
      34. Location.address.state
      ShortState/Jurisdiction. Use value in Jurisdiction if present.
      BindingThe codes SHALL be taken from Value Set - States, Territories and Provinces Vital Records
      (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-states-territories-provinces-vr)
      36. Location.address.state.extension
      SlicingThis element introduces a set of slices on Location.address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 38. Location.address.state.extension:nationalReportingJurisdictionId
        Slice NamenationalReportingJurisdictionId
        Control0..1
        TypeExtension(Location Jurisdiction Id Vital Records) (Extension Type: string)
        40. Location.address.postalCode
        ShortAddress zip
        42. Location.address.country
        ShortAddress country
        BindingThe codes SHALL be taken from Value Set - Residence Country Vital Records
        (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-residence-country-vr)
        44. Location.position
        ShortGeoposition lat/long

        Guidance on how to interpret the contents of this table can be found here

        0. Location
        Definition

        -


        Details and position information for a physical place where services are provided and resources and participants may be stored, found, contained, or accommodated.

        ShortDetails and position information for a physical place
        Comments

        -

        Control0..*
        Is Modifierfalse
        Must Supportfalse
        Summaryfalse
        Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
        dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
        dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
        dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
        dom-6: A resource should have narrative for robust management (text.`div`.exists())
        2. Location.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        4. Location.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        6. Location.status
        Definition

        The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

        Shortactive | suspended | inactive
        Control0..1
        BindingThe codes SHALL be taken from LocationStatushttp://hl7.org/fhir/ValueSet/location-status|4.0.1
        (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

        Indicates whether the location is still in use.

        Typecode
        Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        8. Location.name
        Definition

        Name of the location as used by humans. Does not need to be unique.

        ShortName of LocationName of the location as used by humans
        Comments

        If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

        Control10..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        10. Location.type
        Definition

        Indicates the type of function performed at the location.

        ShortType is used to differentiate profiles of this abstract profileType of function performed
        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleTypehttp://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType
        (extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

        Indicates the type of function performed at the location.

        TypeCodeableConcept
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. Location.telecom
        Definition

        The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

        ShortContact details of the location
        Control0..*
        TypeContactPoint
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. Location.address
        Definition

        Physical location.

        ShortAddressPhysical location
        Comments

        Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

        Control0..1
        TypeAddress
        Is Modifierfalse
        Must Supporttrue
        Summaryfalse
        Requirements

        If locations can be visited, we need to keep track of their address.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. Location.address.extension:predir
        Slice Namepredir
        Definition

        PreDirectional component of address as defined by USPS

        ShortPreDirectional Vital Records
        Control0..1
        TypeExtension(PreDirectional Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Location.address.extension:stnum
        Slice Namestnum
        Definition

        StreetNumber component of address as defined by USPS

        ShortStreetNumber Vital Records
        Control0..1
        TypeExtension(StreetNumber Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Location.address.extension:stname
        Slice Namestname
        Definition

        StreetName component of address as defined by USPS

        ShortStreetName Vital Records
        Control0..1
        TypeExtension(StreetName Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Location.address.extension:stdesig
        Slice Namestdesig
        Definition

        StreetDesignator component of address as defined by USPS

        ShortStreetDesignator Vital Records
        Control0..1
        TypeExtension(StreetDesignator Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Location.address.extension:postdir
        Slice Namepostdir
        Definition

        PostDirectional component of address as defined by USPS

        ShortPostDirectional Vital Records
        Control0..1
        TypeExtension(PostDirectional Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Location.address.extension:unitnumber
        Slice Nameunitnumber
        Definition

        UnitOrAptNumber component of address as defined by USPS

        ShortUnitOrAptNumber Vital Records
        Control0..1
        TypeExtension(UnitOrAptNumber Vital Records) (Extension Type: string)
        Is Modifierfalse
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Location.address.use
        Definition

        The purpose of this address.

        Shorthome | work | temp | old | billing - purpose of this address
        Comments

        Applications can assume that an address is current unless it explicitly says that it is temporary or old.

        Control0..1
        BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1
        (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

        The use of an address.

        Typecode
        Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows an appropriate address to be chosen from a list of many.

        Example<br/><b>General</b>:home
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        30. Location.address.line
        Definition

        This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

        ShortAddress textStreet name, number, direction & P.O. Box etc.
        Control0..*
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Example<br/><b>General</b>:137 Nowhere Street
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        32. Location.address.city
        Definition

        The name of the city, town, suburb, village or other community or delivery center.

        ShortAddress cityName of city, town etc.
        Control0..1
        Typestring
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Alternate NamesMunicpality
        Example<br/><b>General</b>:Erewhon
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        34. Location.address.city.extension
        Definition

        An Extension


        May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortExtensionAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        SlicingThis element introduces a set of slices on Location.address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
        • value @ url
        • 36. Location.address.city.extension:cityCode
          Slice NamecityCode
          Definition

          Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

          ShortCity Code
          Control0..1
          This element is affected by the following invariants: ele-1
          TypeExtension(City Code Vital Records) (Extension Type: positiveInt)
          Is Modifierfalse
          LabelCity Code
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          38. Location.address.district
          Definition

          The name of the administrative area (county).

          ShortAddress countyDistrict name (aka county)
          Comments

          District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summarytrue
          Alternate NamesCounty
          Example<br/><b>General</b>:Madison
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          40. Location.address.district.extension
          Definition

          An Extension


          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortExtensionAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          SlicingThis element introduces a set of slices on Location.address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
          • value @ url
          • 42. Location.address.district.extension:districtCode
            Slice NamedistrictCode
            Definition

            Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

            ShortCounty code
            Control0..1
            This element is affected by the following invariants: ele-1
            TypeExtension(District Code Vital Records) (Extension Type: positiveInt)
            Is Modifierfalse
            LabelCounty code
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            44. Location.address.state
            Definition

            Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

            ShortState/Jurisdiction. Use value in Jurisdiction if present.Sub-unit of country (abbreviations ok)
            Control0..1
            BindingThe codes SHALL be taken from For codes, see Value Set - States, Territories and Provinces Vital Records
            (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-states-territories-provinces-vr)
            Typestring
            Is Modifierfalse
            Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
            Must Supporttrue
            Summarytrue
            Alternate NamesProvince, Territory
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            46. Location.address.state.extension
            Definition

            An Extension


            May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

            ShortExtensionAdditional content defined by implementations
            Comments

            There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

            Control0..*
            TypeExtension
            Is Modifierfalse
            Summaryfalse
            Alternate Namesextensions, user content
            Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
            SlicingThis element introduces a set of slices on Location.address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
            • value @ url
            • 48. Location.address.state.extension:nationalReportingJurisdictionId
              Slice NamenationalReportingJurisdictionId
              Definition

              Location Jurisdiction Id (Extension) supports jurisdictions with a designator that isn't a USPS two-letter code

              ShortLocation Jurisdiction Id Vital Records
              Control0..1
              This element is affected by the following invariants: ele-1
              TypeExtension(Location Jurisdiction Id Vital Records) (Extension Type: string)
              Is Modifierfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              50. Location.address.postalCode
              Definition

              A postal code designating a region defined by the postal service.

              ShortAddress zipPostal code for area
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Alternate NamesZip
              Example<br/><b>General</b>:9132
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              52. Location.address.country
              Definition

              Country - a nation as commonly understood or generally accepted.

              ShortAddress countryCountry (e.g. can be ISO 3166 2 or 3 letter code)
              Comments

              ISO 3166 3 letter codes can be used in place of a human readable country name.

              Control0..1
              BindingThe codes SHALL be taken from For codes, see Value Set - Residence Country Vital Records
              (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-residence-country-vr)
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              54. Location.position
              Definition

              The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

              ShortGeoposition lat/longThe absolute geographic location
              Control0..1
              TypeBackboneElement
              Is Modifierfalse
              Summaryfalse
              Requirements

              For mobile applications and automated route-finding knowing the exact location of the Location is required.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              56. Location.position.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored even if unrecognized
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
              Summarytrue
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content, modifiers
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              58. Location.position.longitude
              Definition

              Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

              ShortLongitude with WGS84 datum
              Control1..1
              Typedecimal
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              60. Location.position.latitude
              Definition

              Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

              ShortLatitude with WGS84 datum
              Control1..1
              Typedecimal
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              62. Location.managingOrganization
              Definition

              The organization responsible for the provisioning and upkeep of the location.

              ShortOrganization responsible for provisioning and upkeep
              Comments

              This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

              Control0..1
              TypeReference(US Core Organization Profile, Organization)
              Is Modifierfalse
              Must Supporttrue
              Summarytrue
              Requirements

              Need to know who manages the location.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

              Guidance on how to interpret the contents of this table can be found here

              0. Location
              Definition

              -

              ShortDetails and position information for a physical place
              Comments

              -

              Control0..*
              Is Modifierfalse
              Must Supportfalse
              Summaryfalse
              Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
              dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
              dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
              dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
              dom-6: A resource should have narrative for robust management (text.`div`.exists())
              2. Location.id
              Definition

              The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

              ShortLogical id of this artifact
              Comments

              The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

              Control0..1
              Typeid
              Is Modifierfalse
              Summarytrue
              4. Location.meta
              Definition

              The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

              ShortMetadata about the resource
              Control0..1
              TypeMeta
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              6. Location.implicitRules
              Definition

              A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

              ShortA set of rules under which this content was created
              Comments

              Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

              Control0..1
              Typeuri
              Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              8. Location.language
              Definition

              The base language in which the resource is written.

              ShortLanguage of the resource content
              Comments

              Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

              Control0..1
              BindingThe codes SHOULD be taken from CommonLanguages
              (preferred to http://hl7.org/fhir/ValueSet/languages)

              A human language.

              Additional BindingsPurpose
              AllLanguagesMax Binding
              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              10. Location.text
              Definition

              A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

              ShortText summary of the resource, for human interpretation
              Comments

              Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

              Control0..1
              TypeNarrative
              Is Modifierfalse
              Summaryfalse
              Alternate Namesnarrative, html, xhtml, display
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              12. Location.contained
              Definition

              These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

              ShortContained, inline Resources
              Comments

              This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

              Control0..*
              TypeResource
              Is Modifierfalse
              Summaryfalse
              Alternate Namesinline resources, anonymous resources, contained resources
              14. Location.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              16. Location.modifierExtension
              Definition

              May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

              Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

              ShortExtensions that cannot be ignored
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
              Summaryfalse
              Requirements

              Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              18. Location.identifier
              Definition

              Unique code or number identifying the location to its users.

              ShortUnique code or number identifying the location to its users
              NoteThis is a business identifier, not a resource identifier (see discussion)
              Control0..*
              TypeIdentifier
              Is Modifierfalse
              Summarytrue
              Requirements

              Organization label locations in registries, need to keep track of those.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              20. Location.status
              Definition

              The status property covers the general availability of the resource, not the current value which may be covered by the operationStatus, or by a schedule/slots if they are configured for the location.

              Shortactive | suspended | inactive
              Control0..1
              BindingThe codes SHALL be taken from LocationStatus
              (required to http://hl7.org/fhir/ValueSet/location-status|4.0.1)

              Indicates whether the location is still in use.

              Typecode
              Is Modifiertrue because This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              22. Location.operationalStatus
              Definition

              The operational status covers operation values most relevant to beds (but can also apply to rooms/units/chairs/etc. such as an isolation unit/dialysis chair). This typically covers concepts such as contamination, housekeeping, and other activities like maintenance.

              ShortThe operational status of the location (typically only for a bed/room)
              Control0..1
              BindingThe codes SHOULD be taken from hl7VS-bedStatus
              (preferred to http://terminology.hl7.org/ValueSet/v2-0116)

              The operational status if the location (where typically a bed/room).

              TypeCoding
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              24. Location.name
              Definition

              Name of the location as used by humans. Does not need to be unique.

              ShortName of Location
              Comments

              If the name of a location changes, consider putting the old name in the alias column so that it can still be located through searches.

              Control1..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Must Supporttrue
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              26. Location.alias
              Definition

              A list of alternate names that the location is known as, or was known as, in the past.

              ShortA list of alternate names that the location is known as, or was known as, in the past
              Comments

              There are no dates associated with the alias/historic names, as this is not intended to track when names were used, but to assist in searching so that older names can still result in identifying the location.

              Control0..*
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summaryfalse
              Requirements

              Over time locations and organizations go through many changes and can be known by different names.

              For searching knowing previous names that the location was known by can be very useful.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              28. Location.description
              Definition

              Description of the Location, which helps in finding or referencing the place.

              ShortAdditional details about the location that could be displayed as further information to identify the location beyond its name
              Control0..1
              Typestring
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              Humans need additional information to verify a correct location has been identified.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              30. Location.mode
              Definition

              Indicates whether a resource instance represents a specific location or a class of locations.

              Shortinstance | kind
              Comments

              This is labeled as a modifier because whether or not the location is a class of locations changes how it can be used and understood.

              Control0..1
              BindingThe codes SHALL be taken from LocationMode
              (required to http://hl7.org/fhir/ValueSet/location-mode|4.0.1)

              Indicates whether a resource instance represents a specific location or a class of locations.

              Typecode
              Is Modifierfalse
              Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
              Summarytrue
              Requirements

              When using a Location resource for scheduling or orders, we need to be able to refer to a class of Locations instead of a specific Location.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              32. Location.type
              Definition

              Indicates the type of function performed at the location.

              ShortType is used to differentiate profiles of this abstract profile
              Control0..*
              BindingUnless not suitable, these codes SHALL be taken from ServiceDeliveryLocationRoleType
              (extensible to http://terminology.hl7.org/ValueSet/v3-ServiceDeliveryLocationRoleType)

              Indicates the type of function performed at the location.

              TypeCodeableConcept
              Is Modifierfalse
              Summarytrue
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              34. Location.telecom
              Definition

              The contact details of communication devices available at the location. This can include phone numbers, fax numbers, mobile numbers, email addresses and web sites.

              ShortContact details of the location
              Control0..*
              TypeContactPoint
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              36. Location.address
              Definition

              Physical location.

              ShortAddress
              Comments

              Additional addresses should be recorded using another instance of the Location resource, or via the Organization.

              Control0..1
              TypeAddress
              Is Modifierfalse
              Must Supporttrue
              Summaryfalse
              Requirements

              If locations can be visited, we need to keep track of their address.

              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              38. Location.address.id
              Definition

              Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

              ShortUnique id for inter-element referencing
              Control0..1
              Typestring
              Is Modifierfalse
              XML FormatIn the XML format, this property is represented as an attribute.
              Summaryfalse
              40. Location.address.extension
              Definition

              May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

              ShortAdditional content defined by implementations
              Comments

              There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

              Control0..*
              TypeExtension
              Is Modifierfalse
              Summaryfalse
              Alternate Namesextensions, user content
              Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
              ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
              SlicingThis element introduces a set of slices on Location.address.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
              • value @ url
              • 42. Location.address.extension:predir
                Slice Namepredir
                Definition

                PreDirectional component of address as defined by USPS

                ShortPreDirectional Vital Records
                Control0..1
                TypeExtension(PreDirectional Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                44. Location.address.extension:stnum
                Slice Namestnum
                Definition

                StreetNumber component of address as defined by USPS

                ShortStreetNumber Vital Records
                Control0..1
                TypeExtension(StreetNumber Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                46. Location.address.extension:stname
                Slice Namestname
                Definition

                StreetName component of address as defined by USPS

                ShortStreetName Vital Records
                Control0..1
                TypeExtension(StreetName Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                48. Location.address.extension:stdesig
                Slice Namestdesig
                Definition

                StreetDesignator component of address as defined by USPS

                ShortStreetDesignator Vital Records
                Control0..1
                TypeExtension(StreetDesignator Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                50. Location.address.extension:postdir
                Slice Namepostdir
                Definition

                PostDirectional component of address as defined by USPS

                ShortPostDirectional Vital Records
                Control0..1
                TypeExtension(PostDirectional Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                52. Location.address.extension:unitnumber
                Slice Nameunitnumber
                Definition

                UnitOrAptNumber component of address as defined by USPS

                ShortUnitOrAptNumber Vital Records
                Control0..1
                TypeExtension(UnitOrAptNumber Vital Records) (Extension Type: string)
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                54. Location.address.use
                Definition

                The purpose of this address.

                Shorthome | work | temp | old | billing - purpose of this address
                Comments

                Applications can assume that an address is current unless it explicitly says that it is temporary or old.

                Control0..1
                BindingThe codes SHALL be taken from AddressUse
                (required to http://hl7.org/fhir/ValueSet/address-use|4.0.1)

                The use of an address.

                Typecode
                Is Modifiertrue because This is labeled as "Is Modifier" because applications should not mistake a temporary or old address etc.for a current/permanent one
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                Allows an appropriate address to be chosen from a list of many.

                Example<br/><b>General</b>:home
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                56. Location.address.type
                Definition

                Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

                Shortpostal | physical | both
                Comments

                The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

                Control0..1
                BindingThe codes SHALL be taken from AddressType
                (required to http://hl7.org/fhir/ValueSet/address-type|4.0.1)

                The type of an address (physical / postal).

                Typecode
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Example<br/><b>General</b>:both
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                58. Location.address.text
                Definition

                Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

                ShortText representation of the address
                Comments

                Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Summarytrue
                Requirements

                A renderable, unencoded form.

                Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                60. Location.address.line
                Definition

                This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

                ShortAddress text
                Control0..*
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Example<br/><b>General</b>:137 Nowhere Street
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                62. Location.address.city
                Definition

                The name of the city, town, suburb, village or other community or delivery center.

                ShortAddress city
                Control0..1
                Typestring
                Is Modifierfalse
                Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                Must Supporttrue
                Summarytrue
                Alternate NamesMunicpality
                Example<br/><b>General</b>:Erewhon
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                64. Location.address.city.id
                Definition

                unique id for the element within a resource (for internal references)

                Shortxml:id (or equivalent in JSON)
                Control0..1
                Typestring
                Is Modifierfalse
                XML FormatIn the XML format, this property is represented as an attribute.
                Summaryfalse
                66. Location.address.city.extension
                Definition

                An Extension

                ShortExtension
                Control0..*
                TypeExtension
                Is Modifierfalse
                Summaryfalse
                Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                SlicingThis element introduces a set of slices on Location.address.city.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                • value @ url
                • 68. Location.address.city.extension:cityCode
                  Slice NamecityCode
                  Definition

                  Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

                  ShortCity Code
                  Control0..1
                  This element is affected by the following invariants: ele-1
                  TypeExtension(City Code Vital Records) (Extension Type: positiveInt)
                  Is Modifierfalse
                  LabelCity Code
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  70. Location.address.city.value
                  Definition

                  The actual value

                  ShortPrimitive value for string
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  Max Length:1048576
                  72. Location.address.district
                  Definition

                  The name of the administrative area (county).

                  ShortAddress county
                  Comments

                  District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

                  Control0..1
                  Typestring
                  Is Modifierfalse
                  Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                  Summarytrue
                  Alternate NamesCounty
                  Example<br/><b>General</b>:Madison
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  74. Location.address.district.id
                  Definition

                  unique id for the element within a resource (for internal references)

                  Shortxml:id (or equivalent in JSON)
                  Control0..1
                  Typestring
                  Is Modifierfalse
                  XML FormatIn the XML format, this property is represented as an attribute.
                  Summaryfalse
                  76. Location.address.district.extension
                  Definition

                  An Extension

                  ShortExtension
                  Control0..*
                  TypeExtension
                  Is Modifierfalse
                  Summaryfalse
                  Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                  ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                  SlicingThis element introduces a set of slices on Location.address.district.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                  • value @ url
                  • 78. Location.address.district.extension:districtCode
                    Slice NamedistrictCode
                    Definition

                    Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

                    ShortCounty code
                    Control0..1
                    This element is affected by the following invariants: ele-1
                    TypeExtension(District Code Vital Records) (Extension Type: positiveInt)
                    Is Modifierfalse
                    LabelCounty code
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    80. Location.address.district.value
                    Definition

                    The actual value

                    ShortPrimitive value for string
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    Max Length:1048576
                    82. Location.address.state
                    Definition

                    Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

                    ShortState/Jurisdiction. Use value in Jurisdiction if present.
                    Control0..1
                    BindingThe codes SHALL be taken from Value Set - States, Territories and Provinces Vital Records
                    (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-states-territories-provinces-vr)
                    Typestring
                    Is Modifierfalse
                    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                    Must Supporttrue
                    Summarytrue
                    Alternate NamesProvince, Territory
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    84. Location.address.state.id
                    Definition

                    unique id for the element within a resource (for internal references)

                    Shortxml:id (or equivalent in JSON)
                    Control0..1
                    Typestring
                    Is Modifierfalse
                    XML FormatIn the XML format, this property is represented as an attribute.
                    Summaryfalse
                    86. Location.address.state.extension
                    Definition

                    An Extension

                    ShortExtension
                    Control0..*
                    TypeExtension
                    Is Modifierfalse
                    Summaryfalse
                    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                    SlicingThis element introduces a set of slices on Location.address.state.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
                    • value @ url
                    • 88. Location.address.state.extension:nationalReportingJurisdictionId
                      Slice NamenationalReportingJurisdictionId
                      Definition

                      Location Jurisdiction Id (Extension) supports jurisdictions with a designator that isn't a USPS two-letter code

                      ShortLocation Jurisdiction Id Vital Records
                      Control0..1
                      This element is affected by the following invariants: ele-1
                      TypeExtension(Location Jurisdiction Id Vital Records) (Extension Type: string)
                      Is Modifierfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      90. Location.address.state.value
                      Definition

                      The actual value

                      ShortPrimitive value for string
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      Max Length:1048576
                      92. Location.address.postalCode
                      Definition

                      A postal code designating a region defined by the postal service.

                      ShortAddress zip
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Must Supporttrue
                      Summarytrue
                      Alternate NamesZip
                      Example<br/><b>General</b>:9132
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      94. Location.address.country
                      Definition

                      Country - a nation as commonly understood or generally accepted.

                      ShortAddress country
                      Comments

                      ISO 3166 3 letter codes can be used in place of a human readable country name.

                      Control0..1
                      BindingThe codes SHALL be taken from Value Set - Residence Country Vital Records
                      (required to http://hl7.org/fhir/us/vr-common-library/ValueSet/ValueSet-residence-country-vr)
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summarytrue
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      96. Location.address.period
                      Definition

                      Time period when address was/is in use.

                      ShortTime period when address was/is in use
                      Control0..1
                      TypePeriod
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      Allows addresses to be placed in historical context.

                      Example<br/><b>General</b>:{ "start" : "2010-03-23", "end" : "2010-07-01" }
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      98. Location.physicalType
                      Definition

                      Physical form of the location, e.g. building, room, vehicle, road.

                      ShortPhysical form of the location
                      Control0..1
                      BindingFor example codes, see LocationType
                      (example to http://hl7.org/fhir/ValueSet/location-physical-type)

                      Physical form of the location.

                      TypeCodeableConcept
                      Is Modifierfalse
                      Summarytrue
                      Requirements

                      For purposes of showing relevant locations in queries, we need to categorize locations.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      100. Location.position
                      Definition

                      The absolute geographic location of the Location, expressed using the WGS84 datum (This is the same co-ordinate system used in KML).

                      ShortGeoposition lat/long
                      Control0..1
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      For mobile applications and automated route-finding knowing the exact location of the Location is required.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      102. Location.position.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      104. Location.position.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      106. Location.position.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      108. Location.position.longitude
                      Definition

                      Longitude. The value domain and the interpretation are the same as for the text of the longitude element in KML (see notes below).

                      ShortLongitude with WGS84 datum
                      Control1..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      110. Location.position.latitude
                      Definition

                      Latitude. The value domain and the interpretation are the same as for the text of the latitude element in KML (see notes below).

                      ShortLatitude with WGS84 datum
                      Control1..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      112. Location.position.altitude
                      Definition

                      Altitude. The value domain and the interpretation are the same as for the text of the altitude element in KML (see notes below).

                      ShortAltitude with WGS84 datum
                      Control0..1
                      Typedecimal
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      114. Location.managingOrganization
                      Definition

                      The organization responsible for the provisioning and upkeep of the location.

                      ShortOrganization responsible for provisioning and upkeep
                      Comments

                      This can also be used as the part of the organization hierarchy where this location provides services. These services can be defined through the HealthcareService resource.

                      Control0..1
                      TypeReference(US Core Organization Profile)
                      Is Modifierfalse
                      Must Supporttrue
                      Summarytrue
                      Requirements

                      Need to know who manages the location.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      116. Location.partOf
                      Definition

                      Another Location of which this Location is physically a part of.

                      ShortAnother Location this one is physically a part of
                      Control0..1
                      TypeReference(Location)
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      For purposes of location, display and identification, knowing which locations are located within other locations is important.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      118. Location.hoursOfOperation
                      Definition

                      What days/times during a week is this location usually open.

                      ShortWhat days/times during a week is this location usually open
                      Comments

                      This type of information is commonly found published in directories and on websites informing customers when the facility is available.

                      Specific services within the location may have their own hours which could be shorter (or longer) than the locations hours.

                      Control0..*
                      TypeBackboneElement
                      Is Modifierfalse
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      120. Location.hoursOfOperation.id
                      Definition

                      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

                      ShortUnique id for inter-element referencing
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      XML FormatIn the XML format, this property is represented as an attribute.
                      Summaryfalse
                      122. Location.hoursOfOperation.extension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

                      ShortAdditional content defined by implementations
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifierfalse
                      Summaryfalse
                      Alternate Namesextensions, user content
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      124. Location.hoursOfOperation.modifierExtension
                      Definition

                      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

                      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

                      ShortExtensions that cannot be ignored even if unrecognized
                      Comments

                      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

                      Control0..*
                      TypeExtension
                      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
                      Summarytrue
                      Requirements

                      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

                      Alternate Namesextensions, user content, modifiers
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
                      126. Location.hoursOfOperation.daysOfWeek
                      Definition

                      Indicates which days of the week are available between the start and end Times.

                      Shortmon | tue | wed | thu | fri | sat | sun
                      Control0..*
                      BindingThe codes SHALL be taken from DaysOfWeek
                      (required to http://hl7.org/fhir/ValueSet/days-of-week|4.0.1)

                      The days of the week.

                      Typecode
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      128. Location.hoursOfOperation.allDay
                      Definition

                      The Location is open all day.

                      ShortThe Location is open all day
                      Control0..1
                      Typeboolean
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      130. Location.hoursOfOperation.openingTime
                      Definition

                      Time that the Location opens.

                      ShortTime that the Location opens
                      Control0..1
                      Typetime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      132. Location.hoursOfOperation.closingTime
                      Definition

                      Time that the Location closes.

                      ShortTime that the Location closes
                      Control0..1
                      Typetime
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      134. Location.availabilityExceptions
                      Definition

                      A description of when the locations opening ours are different to normal, e.g. public holiday availability. Succinctly describing all possible exceptions to normal site availability as detailed in the opening hours Times.

                      ShortDescription of availability exceptions
                      Control0..1
                      Typestring
                      Is Modifierfalse
                      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
                      Summaryfalse
                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
                      136. Location.endpoint
                      Definition

                      Technical endpoints providing access to services operated for the location.

                      ShortTechnical endpoints providing access to services operated for the location
                      Control0..*
                      TypeReference(Endpoint)
                      Is Modifierfalse
                      Summaryfalse
                      Requirements

                      Organizations may have different systems at different locations that provide various services and need to be able to define the technical connection details for how to connect to them, and for what purpose.

                      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))