QI-Core Implementation Guide
7.0.0 - STU 7 United States of America flag

This page is part of the Quality Improvement Core Framework (v7.0.0: STU7 (v7.0.0)) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions

Resource Profile: QICore Simple Observation

Official URL: http://hl7.org/fhir/us/qicore/StructureDefinition/qicore-simple-observation Version: 7.0.0
Standards status: Trial-use Maturity Level: 4 Computable Name: QICoreSimpleObservation

Profile of Simple Observation for decision support/quality metrics. Defines the core set of elements and extensions for quality rule and measure authors.

"Must Have", "QI Elements" and "primary code path" are defined in the QI-Core Must Support section.
Must Have:
  • subject: (QI) Who and/or what the observation is about
  • category: (QI) Classification of type of observation
  • code: (QI) Type of observation (code / type)
  • status: (QI) registered | prliminary | final | amended | corrected | cancelled | entered-in-error | unknown
QI Elements:
  • performer: (QI) Who is responsible for the observation
  • derivedFrom: (QI) US Core Profiles or other resource the observation is made from
  • value[x]: (QI) Actual result
  • effective[x]: (QI) Clinically relevant time/time-period for observation
  • interpretation: (QI) High, low, normal, etc.
Primary code path: code
(PCPath) This element is the primary code path for this resource CQL Retrieve

Usage

Note: US-Core and QI-Core define precise profiles for specific observations, as well as a general profile for LOINC-code laboratory result observations. QI-Core inherits these US Core specific profiles directly and individually profiles others. When creating expressions for eCQMs or CDS artifacts with QI-Core for the following clinical data, use the applicable profile directly rather than the generic QICore Observation profile:

As stated in the Home Page, QI-Core derives from US Core and so the requirements on “MustSupport” defined in US Core must be respected. QI-Core further describes and constrains the “MustSupport” functionality.

The following example illustrates the use of the observation profile.

define "Pap Test with Results":
  [Observation: "Pap Test"] PapTest
    where PapTest.value is not null
      and PapTest.status in { 'final', 'amended', 'corrected', 'preliminary' }

See the patterns page for implementation and usage patterns.

Examples

Example of a Frailty Observation
Example of a Gestation Age at Birth Observation
Example of a Date and time of obstetric delivery observation
Example of an estimated delivery date observation
Example of a number of preterm births observation
Example of a number of term births observation
Example of a number of parity observation
Example of a number of pregnancies observation

Usages:

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation C 0..* USCoreSimpleObservationProfile assessment observation
Constraints: obs-6, obs-7
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... Slices for category S 1..* CodeableConcept (QI) Classification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
.... category:us-core S 0..* CodeableConcept Classification of type of observation
Binding: US Core Simple Observation Category (required): Note that other codes are permitted, see Required Bindings When Slicing by Value Sets
... code SΣ 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject SΣ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... effective[x] SΣ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime S
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... performer SΣ 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] SΣC 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity S
.... valueCodeableConcept CodeableConcept S
.... valueString string S
.... valueBoolean boolean S
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
From the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
From the FHIR Standard
Observation.category:us-corerequiredUSCoreSimpleObservationCategory
http://hl7.org/fhir/us/core/ValueSet/us-core-simple-observation-category
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

This structure is derived from USCoreSimpleObservationProfile

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation 0..* USCoreSimpleObservationProfile assessment observation
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... partOf 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... category 1..* CodeableConcept (QI) Classification of type of observation
... code 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject Σ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... effective[x] Σ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... performer 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] Σ 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard
NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation C 0..* USCoreSimpleObservationProfile assessment observation
Constraints: obs-6, obs-7
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.
Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
... contained 0..* Resource Contained, inline Resources
... extension 0..* Extension Additional content defined by implementations
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier Σ 0..* Identifier Business Identifier for observation
... basedOn Σ 0..* Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest) Fulfills plan, proposal or order
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... status ?!SΣ 1..1 code (QI) registered | prliminary | final | amended | corrected | cancelled | entered-in-error | unknown
Binding: ObservationStatus (required): Codes providing the status of an observation.
... Slices for category S 1..* CodeableConcept (QI) Classification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
.... category:us-core S 0..* CodeableConcept Classification of type of observation
Binding: US Core Simple Observation Category (required): Note that other codes are permitted, see Required Bindings When Slicing by Value Sets
... code SΣ 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject SΣ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... focus Σ 0..* Reference(Resource) What the observation is about, when it is not about the subject of record
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this observation is made
... effective[x] SΣ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime S
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... issued Σ 0..1 instant Date/Time this version was made available
... performer SΣ 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] SΣC 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity S
.... valueCodeableConcept CodeableConcept S
.... valueString string S
.... valueBoolean boolean S
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason C 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... note 0..* Annotation Comments about the observation
... bodySite 0..1 CodeableConcept Observed body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
... method 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.
... specimen 0..1 Reference(Specimen) Specimen used for this observation
... device 0..1 Reference(Device | DeviceMetric) (Measurement) Device
... referenceRange C 0..* BackboneElement Provides guide for interpretation
Constraints: obs-3
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low C 0..1 SimpleQuantity Low Range, if relevant
.... high C 0..1 SimpleQuantity High Range, if relevant
.... type 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
.... appliesTo 0..* CodeableConcept Reference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
.... age 0..1 Range Applicable age range, if relevant
.... text 0..1 string Text based reference range in an observation
... hasMember Σ 0..* Reference(Observation | QuestionnaireResponse | MolecularSequence) Related resource that belongs to the Observation group
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from
... component Σ 0..* BackboneElement Component results
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 1..1 CodeableConcept Type of component observation (code / type)
Binding: LOINCCodes (example): Codes identifying names of simple observations.
.... value[x] Σ 0..1 Actual component result
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason C 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
.... interpretation 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
.... referenceRange 0..* See referenceRange (Observation) Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.languagepreferredCommonLanguages
http://hl7.org/fhir/ValueSet/languages
From the FHIR Standard
Additional Bindings Purpose
AllLanguages Max Binding
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
From the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
From the FHIR Standard
Observation.category:us-corerequiredUSCoreSimpleObservationCategory
http://hl7.org/fhir/us/core/ValueSet/us-core-simple-observation-category
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard
Observation.bodySiteexampleSNOMEDCTBodyStructures
http://hl7.org/fhir/ValueSet/body-site
From the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
From the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
From the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
From the FHIR Standard
Observation.component.codeexampleLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
From the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Key Elements View

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation C 0..* USCoreSimpleObservationProfile assessment observation
Constraints: obs-6, obs-7
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... Slices for category S 1..* CodeableConcept (QI) Classification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
.... category:us-core S 0..* CodeableConcept Classification of type of observation
Binding: US Core Simple Observation Category (required): Note that other codes are permitted, see Required Bindings When Slicing by Value Sets
... code SΣ 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject SΣ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... effective[x] SΣ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime S
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... performer SΣ 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] SΣC 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity S
.... valueCodeableConcept CodeableConcept S
.... valueString string S
.... valueBoolean boolean S
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
From the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
From the FHIR Standard
Observation.category:us-corerequiredUSCoreSimpleObservationCategory
http://hl7.org/fhir/us/core/ValueSet/us-core-simple-observation-category
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

Differential View

This structure is derived from USCoreSimpleObservationProfile

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation 0..* USCoreSimpleObservationProfile assessment observation
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... partOf 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... category 1..* CodeableConcept (QI) Classification of type of observation
... code 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject Σ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... effective[x] Σ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... performer 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] Σ 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity
.... valueCodeableConcept CodeableConcept
.... valueString string
.... valueBoolean boolean
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from

doco Documentation for this format

Terminology Bindings (Differential)

PathConformanceValueSetURI
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard

Snapshot View

NameFlagsCard.TypeDescription & Constraints    Filter: Filtersdoco
.. Observation C 0..* USCoreSimpleObservationProfile assessment observation
Constraints: obs-6, obs-7
... id Σ 0..1 id Logical id of this artifact
... meta Σ 0..1 Meta Metadata about the resource
... implicitRules ?!Σ 0..1 uri A set of rules under which this content was created
... language 0..1 code Language of the resource content
Binding: CommonLanguages (preferred): A human language.
Additional BindingsPurpose
AllLanguages Max Binding
... text 0..1 Narrative Text summary of the resource, for human interpretation
This profile does not constrain the narrative in regard to content, language, or traceability to data elements
... contained 0..* Resource Contained, inline Resources
... extension 0..* Extension Additional content defined by implementations
... modifierExtension ?! 0..* Extension Extensions that cannot be ignored
... identifier Σ 0..* Identifier Business Identifier for observation
... basedOn Σ 0..* Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest) Fulfills plan, proposal or order
... partOf Σ 0..* Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy) Part of referenced event
... status ?!SΣ 1..1 code (QI) registered | prliminary | final | amended | corrected | cancelled | entered-in-error | unknown
Binding: ObservationStatus (required): Codes providing the status of an observation.
... Slices for category S 1..* CodeableConcept (QI) Classification of type of observation
Slice: Unordered, Open by pattern:$this
Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.
.... category:us-core S 0..* CodeableConcept Classification of type of observation
Binding: US Core Simple Observation Category (required): Note that other codes are permitted, see Required Bindings When Slicing by Value Sets
... code SΣ 1..1 CodeableConcept (QI) Type of observation (code / type)
Binding: LOINCCodes (preferred): This value set specifies the type of observation
... subject SΣ 1..1 Reference(QICore Patient) (QI) Who and/or what the observation is about
... focus Σ 0..* Reference(Resource) What the observation is about, when it is not about the subject of record
... encounter Σ 0..1 Reference(Encounter) Healthcare event during which this observation is made
... effective[x] SΣ 0..1 (QI) Clinically relevant time/time-period for observation
.... effectiveDateTime dateTime S
.... effectivePeriod Period
.... effectiveTiming Timing
.... effectiveInstant instant
... issued Σ 0..1 instant Date/Time this version was made available
... performer SΣ 0..* Reference(QICore Practitioner | QICore Organization | QICore Patient | QICore PractitionerRole | QICore CareTeam | QICore RelatedPerson) (QI) Who is responsible for the observation
... value[x] SΣC 0..1 (QI) Actual result
Slice: Unordered, Open by type:$this
.... valueQuantity Quantity S
.... valueCodeableConcept CodeableConcept S
.... valueString string S
.... valueBoolean boolean S
.... valueInteger integer
.... valueRange Range
.... valueRatio Ratio
.... valueSampledData SampledData
.... valueTime time
.... valueDateTime dateTime
.... valuePeriod Period
... dataAbsentReason C 0..1 CodeableConcept Why the result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
... interpretation 0..* CodeableConcept (QI) High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
... note 0..* Annotation Comments about the observation
... bodySite 0..1 CodeableConcept Observed body part
Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.
... method 0..1 CodeableConcept How it was done
Binding: ObservationMethods (example): Methods for simple observations.
... specimen 0..1 Reference(Specimen) Specimen used for this observation
... device 0..1 Reference(Device | DeviceMetric) (Measurement) Device
... referenceRange C 0..* BackboneElement Provides guide for interpretation
Constraints: obs-3
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... low C 0..1 SimpleQuantity Low Range, if relevant
.... high C 0..1 SimpleQuantity High Range, if relevant
.... type 0..1 CodeableConcept Reference range qualifier
Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
.... appliesTo 0..* CodeableConcept Reference range population
Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
.... age 0..1 Range Applicable age range, if relevant
.... text 0..1 string Text based reference range in an observation
... hasMember Σ 0..* Reference(Observation | QuestionnaireResponse | MolecularSequence) Related resource that belongs to the Observation group
... derivedFrom Σ 0..* Reference(QICore Simple Observation | QICore QuestionnaireResponse | QICore ImagingStudy | US Core DocumentReference Profile | Media | MolecularSequence) (QI) US Core Profiles or other resource the observation is made from
... component Σ 0..* BackboneElement Component results
.... id 0..1 string Unique id for inter-element referencing
.... extension 0..* Extension Additional content defined by implementations
.... modifierExtension ?!Σ 0..* Extension Extensions that cannot be ignored even if unrecognized
.... code Σ 1..1 CodeableConcept Type of component observation (code / type)
Binding: LOINCCodes (example): Codes identifying names of simple observations.
.... value[x] Σ 0..1 Actual component result
..... valueQuantity Quantity
..... valueCodeableConcept CodeableConcept
..... valueString string
..... valueBoolean boolean
..... valueInteger integer
..... valueRange Range
..... valueRatio Ratio
..... valueSampledData SampledData
..... valueTime time
..... valueDateTime dateTime
..... valuePeriod Period
.... dataAbsentReason C 0..1 CodeableConcept Why the component result is missing
Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.
.... interpretation 0..* CodeableConcept High, low, normal, etc.
Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
.... referenceRange 0..* See referenceRange (Observation) Provides guide for interpretation of component result

doco Documentation for this format

Terminology Bindings

PathConformanceValueSetURI
Observation.languagepreferredCommonLanguages
http://hl7.org/fhir/ValueSet/languages
From the FHIR Standard
Additional Bindings Purpose
AllLanguages Max Binding
Observation.statusrequiredObservationStatus
http://hl7.org/fhir/ValueSet/observation-status|4.0.1
From the FHIR Standard
Observation.categorypreferredObservationCategoryCodes
http://hl7.org/fhir/ValueSet/observation-category
From the FHIR Standard
Observation.category:us-corerequiredUSCoreSimpleObservationCategory
http://hl7.org/fhir/us/core/ValueSet/us-core-simple-observation-category
Observation.codepreferredLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
From the FHIR Standard
Observation.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard
Observation.bodySiteexampleSNOMEDCTBodyStructures
http://hl7.org/fhir/ValueSet/body-site
From the FHIR Standard
Observation.methodexampleObservationMethods
http://hl7.org/fhir/ValueSet/observation-methods
From the FHIR Standard
Observation.referenceRange.typepreferredObservationReferenceRangeMeaningCodes
http://hl7.org/fhir/ValueSet/referencerange-meaning
From the FHIR Standard
Observation.referenceRange.appliesToexampleObservationReferenceRangeAppliesToCodes
http://hl7.org/fhir/ValueSet/referencerange-appliesto
From the FHIR Standard
Observation.component.codeexampleLOINCCodes(a valid code from LOINC)
http://hl7.org/fhir/ValueSet/observation-codes
From the FHIR Standard
Observation.component.dataAbsentReasonextensibleDataAbsentReason
http://hl7.org/fhir/ValueSet/data-absent-reason
From the FHIR Standard
Observation.component.interpretationextensibleObservationInterpretationCodes
http://hl7.org/fhir/ValueSet/observation-interpretation
From the FHIR Standard

Constraints

IdGradePath(s)DetailsRequirements
dom-2errorObservationIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3errorObservationIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4errorObservationIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5errorObservationIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6best practiceObservationA resource should have narrative for robust management
: text.`div`.exists()
ele-1error**ALL** elementsAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1error**ALL** extensionsMust have either extensions or value[x], not both
: extension.exists() != value.exists()
obs-3errorObservation.referenceRangeMust have at least a low or a high or text
: low.exists() or high.exists() or text.exists()
obs-6errorObservationdataAbsentReason SHALL only be present if Observation.value[x] is not present
: dataAbsentReason.empty() or value.empty()
obs-7errorObservationIf Observation.code is the same as an Observation.component.code then the value element associated with the code SHALL NOT be present
: value.empty() or component.code.where(coding.intersect(%resource.code.coding).exists()).empty()

 

Other representations of profile: CSV, Excel, Schematron