Profile Comparison between http://hl7.org/fhir/us/core/StructureDefinition/us-core-observation-screening-response vs http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-ecog-performance-status

Messages

Metadata

Name	Value		Comments
abstract	false
baseDefinition	http://hl7.org/fhir/StructureDefinition/Observation
copyright	Used by permission of HL7 International, all rights reserved Creative Commons License		Removed the item 'Used by permission of HL7 International, all rights reserved Creative Commons License'
date	2021-11-12	2022-01-18T03:17:40+00:00	Values Differ
description	Profile for observations that represent question and answer pairs from from surveys/questionnaires such as Social Determinants of Health (SDOH) screening instruments.	The Eastern Cooperative Oncology Group (ECOG) Performance Status represents the patient's functional status and is used to determine their ability to tolerate therapies in serious illness, specifically for chemotherapy. (Definition from: [LOINC](https://loinc.org/89262-0/))	Values Differ
experimental
fhirVersion	4.0.1
jurisdiction
jurisdiction[0]	urn:iso:std:iso:3166#US
kind	resource
name	USCoreObservationScreeningResponse	ECOGPerformanceStatus	Values Differ
publisher	HL7 International - Cross-Group Projects	HL7 International Clinical Interoperability Council	Values Differ
purpose
status	active
title	US Core Screening Response Observation Profile	ECOG Performance Status Profile	Values Differ
type	Observation
url	http://hl7.org/fhir/us/core/StructureDefinition/us-core-observation-screening-response	http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-ecog-performance-status	Values Differ
version	4.1.0	2.0.0	Values Differ

Structure

Name	L Flags	L Card.	L Type	L Description & Constraints	R Flags	R Card.	L Type	L Description & Constraints	Comments
Observation	I	0..*	Observation	questionnaire observations us-core-2: If there is no component or hasMember element then either a value[x] or a data absent reason must be present	I	0..*	Observation	Measurements and simple assertions	Elements differ in short: 'questionnaire observations' vs 'Measurements and simple assertions' Elements differ in definition: 'For Observations derived from surveys/questionnaires.' vs 'Measurements and simple assertions made about a patient, device or other subject.' Elements differ in comments: 'Used for simple observations such as education status, food insecurity observations, etc. This profile allows the representation of SDOH observations based on SDOH screening questionnaire responses (which can also be represented using SDC QuestionnaireResponse).' vs 'Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.'
id	Σ	0..1	string	Logical id of this artifact	Σ	0..1	string	Logical id of this artifact
meta	Σ	0..1	Meta	Metadata about the resource	Σ	0..1	Meta	Metadata about the resource
implicitRules	?!Σ	0..1	uri	A set of rules under which this content was created	?!Σ	0..1	uri	A set of rules under which this content was created
language		0..1	code	Language of the resource content Binding: CommonLanguages (preferred) Max Binding: AllLanguages: A human language.		0..1	code	Language of the resource content Binding: CommonLanguages (preferred) Max Binding: AllLanguages: A human language.
text		0..1	Narrative	Text summary of the resource, for human interpretation		0..1	Narrative	Text summary of the resource, for human interpretation
contained		0..*	Resource	Contained, inline Resources		0..*	Resource	Contained, inline Resources
extension		0..*	Extension	Additional content defined by implementations		0..*	Extension	Additional content defined by implementations
modifierExtension	?!	0..*	Extension	Extensions that cannot be ignored	?!	0..*	Extension	Extensions that cannot be ignored
identifier	Σ	0..*	Identifier	Business Identifier for observation	Σ	0..*	Identifier	Business Identifier for observation
basedOn	Σ	0..*	Reference(CarePlan | DeviceRequest | ImmunizationRecommendation | MedicationRequest | NutritionOrder | ServiceRequest)	Fulfills plan, proposal or order	Σ	0..*	Reference(ServiceRequest | CarePlan)	Fulfills plan, proposal or order	Type Mismatch: Reference([CanonicalType[http://hl7.org/fhir/StructureDefinition/CarePlan], CanonicalType[http://hl7.org/fhir/StructureDefinition/DeviceRequest], CanonicalType[http://hl7.org/fhir/StructureDefinition/ImmunizationRecommendation], CanonicalType[http://hl7.org/fhir/StructureDefinition/MedicationRequest], CanonicalType[http://hl7.org/fhir/StructureDefinition/NutritionOrder], CanonicalType[http://hl7.org/fhir/StructureDefinition/ServiceRequest]]) vs Reference([CanonicalType[http://hl7.org/fhir/StructureDefinition/ServiceRequest], CanonicalType[http://hl7.org/fhir/StructureDefinition/CarePlan]])
partOf	Σ	0..*	Reference(MedicationAdministration | MedicationDispense | MedicationStatement | Procedure | Immunization | ImagingStudy)	Part of referenced event	Σ	0..*	Reference(Procedure)	Part of referenced event	Type Mismatch: Reference([CanonicalType[http://hl7.org/fhir/StructureDefinition/MedicationAdministration], CanonicalType[http://hl7.org/fhir/StructureDefinition/MedicationDispense], CanonicalType[http://hl7.org/fhir/StructureDefinition/MedicationStatement], CanonicalType[http://hl7.org/fhir/StructureDefinition/Procedure], CanonicalType[http://hl7.org/fhir/StructureDefinition/Immunization], CanonicalType[http://hl7.org/fhir/StructureDefinition/ImagingStudy]]) vs Reference([CanonicalType[http://hl7.org/fhir/StructureDefinition/Procedure]])
status	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.	?!SΣ	1..1	code	registered | preliminary | final | amended + Binding: ObservationStatus (required): Codes providing the status of an observation.
Slices for category	S	1..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories.		0..*	CodeableConcept	Classification of type of observation Slice: Unordered, Open by pattern:$this Binding: ObservationCategoryCodes (preferred): Codes for high level observation categories. Required Pattern: {"coding":[{"system":"http://terminology.hl7.org/CodeSystem/observation-category","code":"survey"}]}	Elements differ in requirements: 'To identify that observation is derived from a questionnaire.' vs 'Used for filtering what observations are retrieved and displayed.' Elements differ in definition for mustSupport: 'true' vs 'false' Element minimum cardinalities differ: '1' vs '0'
code	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: US Core Common SDOH Assessments ValueSet (preferred)	SΣ	1..1	CodeableConcept	Type of observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations. Required Pattern: {"coding":[{"system":"http://loinc.org","code":"89247-1"}]}	Example/preferred bindings differ at Observation.code using binding from USCoreObservationScreeningResponse
subject	SΣ	1..1	Reference(US Core Patient Profile)	Who and/or what the observation is about	SΣ	1..1	Reference(Cancer Patient Profile)	Who and/or what the observation is about	Elements differ in definition: 'The patient, or group of patients, location, or device this observation is about and into whose record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the `focus` element or the `code` itself specifies the actual focus of the observation.' vs 'Patient whose performance status is recorded.'
focus	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record	Σ	0..*	Reference(Resource)	What the observation is about, when it is not about the subject of record
encounter	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made	Σ	0..1	Reference(Encounter)	Healthcare event during which this observation is made
effective[x]	SΣI	0..1	dateTime S, Period, Timing, instant	Clinically relevant time/time-period for observation us-core-1: Datetime must be at least to day.	SΣ	0..1	dateTime, Period	Clinically relevant time/time-period for observation	Elements differ in definition: 'The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time".' vs 'The time or time-period the observed value is asserted as being true. For biological subjects - e.g. human patients - this is usually called the "physiologically relevant time". This is usually either the time of the procedure or of specimen collection, but very often the source of the date/time is not known, only the date/time itself.' Elements differ in comments: 'At least a date should be present unless this observation is a historical report.' vs 'At least a date should be present unless this observation is a historical report. For recording imprecise or "fuzzy" times (For example, a blood glucose measurement taken "after breakfast") use the [Timing] datatype which allow the measurement to be tied to regular life events.'
issued	Σ	0..1	instant	Date/Time this version was made available	Σ	0..1	instant	Date/Time this version was made available
performer	SΣ	0..*	Reference(US Core Practitioner Profile S | US Core Organization Profile | US Core Patient Profile | PractitionerRole | US Core CareTeam Profile | US Core Related Person)	Who is responsible for the observation	Σ	0..*	Reference(Practitioner | PractitionerRole | Organization | CareTeam | Patient | RelatedPerson)	Who is responsible for the observation	Elements differ in definition for mustSupport: 'true' vs 'false'
value[x]	SΣI	0..1	Quantity S, CodeableConcept S, string S, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual result us-core-3: SHALL use UCUM for coded quantity units.	SΣI	0..1	integer	Actual result	Elements differ in comments: 'An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value.' vs 'An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the [Notes section] below.'
dataAbsentReason	SI	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.	I	0..1	CodeableConcept	Why the result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.	Elements differ in comments: '"Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For a given LOINC question, if the LOINC answer list includes concepts such as 'unknown' or 'not available', they should be used for Observation.value. Where these concepts are not part of the value set for Observation.value, the Observation.dataAbsentReason can be used if necessary and appropriate.' vs 'Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "specimen unsatisfactory". The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.' Elements differ in definition for mustSupport: 'true' vs 'false'
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.	S	0..*	CodeableConcept	High, low, normal, etc. Binding: LOINC Answer List LL529-9 (required)	Elements differ in definition for mustSupport: 'false' vs 'true' Unable to resolve right value set http://loinc.org/vs/LL529-9 at Observation.interpretation
note		0..*	Annotation	Comments about the observation		0..*	Annotation	Comments about the observation
bodySite		0..1	CodeableConcept	Observed body part Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.		0..1	CodeableConcept	Not used in this profile Binding: SNOMEDCTBodyStructures (example): Codes describing anatomical locations. May include laterality.	Elements differ in short: 'Observed body part' vs 'Not used in this profile' Elements differ in definition: 'Indicates the site on the subject's body where the observation was made (i.e. the target site).' vs 'Not used in this profile'
method		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.		0..1	CodeableConcept	How it was done Binding: ObservationMethods (example): Methods for simple observations.
specimen		0..1	Reference(Specimen)	Specimen used for this observation		0..1	Reference(Specimen)	Not used in this profile	Elements differ in short: 'Specimen used for this observation' vs 'Not used in this profile' Elements differ in definition: 'The specimen that was used when this observation was made.' vs 'Not used in this profile'
device		0..1	Reference(Device | DeviceMetric)	(Measurement) Device		0..1	Reference(Device | DeviceMetric)	Not used in this profile	Elements differ in short: '(Measurement) Device' vs 'Not used in this profile' Elements differ in definition: 'The device used to generate the observation data.' vs 'Not used in this profile'
referenceRange	I	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text	I	0..*	BackboneElement	Provides guide for interpretation obs-3: Must have at least a low or a high or text
id		0..1	string	Unique id for inter-element referencing		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
low	I	0..1	SimpleQuantity	Low Range, if relevant	I	0..1	SimpleQuantity	Low Range, if relevant
high	I	0..1	SimpleQuantity	High Range, if relevant	I	0..1	SimpleQuantity	High Range, if relevant
type		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.		0..1	CodeableConcept	Reference range qualifier Binding: ObservationReferenceRangeMeaningCodes (preferred): Code for the meaning of a reference range.
appliesTo		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.		0..*	CodeableConcept	Reference range population Binding: ObservationReferenceRangeAppliesToCodes (example): Codes identifying the population the reference range applies to.
age		0..1	Range	Applicable age range, if relevant		0..1	Range	Applicable age range, if relevant
text		0..1	string	Text based reference range in an observation		0..1	string	Text based reference range in an observation
hasMember	Σ	0..*	Reference(Observation | QuestionnaireResponse | MolecularSequence)	Related resource that belongs to the Observation group	Σ	0..*	Reference(Observation | QuestionnaireResponse | MolecularSequence)	Not used in this profile	Elements differ in short: 'Related resource that belongs to the Observation group' vs 'Not used in this profile' Elements differ in definition: 'This observation is a group observation (e.g. a battery, a panel of tests, a set of vital sign measurements) that includes the target as a member of the group.' vs 'Not used in this profile'
derivedFrom	SΣ	0..*	Reference(US Core Screening Response Observation Profile S | http://hl7.org/fhir/uv/sdc/StructureDefinition/sdc-questionnaireresponse S | US Core DocumentReference Profile | ImagingStudy | Media | MolecularSequence)	Related questionnaire responses or observations that the observation is made from	Σ	0..*	Reference(DocumentReference | ImagingStudy | Media | QuestionnaireResponse | Observation | MolecularSequence)	Related measurements the observation is made from	Elements differ in short: 'Related questionnaire responses or observations that the observation is made from' vs 'Related measurements the observation is made from' Elements differ in definition: 'Questionnaire responses or observations from which this observation value is derived.' vs 'The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.' Elements differ in definition for mustSupport: 'true' vs 'false' Type Mismatch: Reference([CanonicalType[http://hl7.org/fhir/us/core/StructureDefinition/us-core-observation-screening-response], CanonicalType[http://hl7.org/fhir/uv/sdc/StructureDefinition/sdc-questionnaireresponse], CanonicalType[http://hl7.org/fhir/us/core/StructureDefinition/us-core-documentreference], CanonicalType[http://hl7.org/fhir/StructureDefinition/ImagingStudy], CanonicalType[http://hl7.org/fhir/StructureDefinition/Media], CanonicalType[http://hl7.org/fhir/StructureDefinition/MolecularSequence]]) vs Reference([CanonicalType[http://hl7.org/fhir/StructureDefinition/DocumentReference], CanonicalType[http://hl7.org/fhir/StructureDefinition/ImagingStudy], CanonicalType[http://hl7.org/fhir/StructureDefinition/Media], CanonicalType[http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse], CanonicalType[http://hl7.org/fhir/StructureDefinition/Observation], CanonicalType[http://hl7.org/fhir/StructureDefinition/MolecularSequence]])
component	SΣ	0..*	BackboneElement	Component results	Σ	0..*	BackboneElement	Not used in this profile	Elements differ in short: 'Component results' vs 'Not used in this profile' Elements differ in definition: 'Some observations have multiple component observations. These component observations are expressed as separate code value pairs that share the same attributes. Examples: Individuals may be multiracial. Component is used to capture one or more races.' vs 'Not used in this profile' Elements differ in comments: 'For questions represented in LOINC that specify “check all that apply”, the LOINC question should be used for Observation.code and for Observation.component.code. For “check all that apply” questions, the answers (regardless of whether one or more are selected) should only be represented using Observation.component.value and Observation.value should be empty.' vs 'For a discussion on the ways Observations can be assembled in groups together see [Notes] below.' Elements differ in definition for mustSupport: 'true' vs 'false'
id		0..1	string	Unique id for inter-element referencing		0..1	string	Unique id for inter-element referencing
extension		0..*	Extension	Additional content defined by implementations		0..*	Extension	Additional content defined by implementations
modifierExtension	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized	?!Σ	0..*	Extension	Extensions that cannot be ignored even if unrecognized
code	SΣ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (extensible)	Σ	1..1	CodeableConcept	Type of component observation (code / type) Binding: LOINCCodes (example): Codes identifying names of simple observations.	Elements differ in definition for mustSupport: 'true' vs 'false'
value[x]	SΣI	0..1	Quantity S, CodeableConcept S, string S, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result us-core-3: SHALL use UCUM for coded quantity units.	Σ	0..1	Quantity, CodeableConcept, string, boolean, integer, Range, Ratio, SampledData, time, dateTime, Period	Actual component result	Elements differ in comments: 'see `Observation.value[x]` comments' vs 'Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the [Notes section] below.' Elements differ in definition for mustSupport: 'true' vs 'false'
dataAbsentReason	SI	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.	I	0..1	CodeableConcept	Why the component result is missing Binding: DataAbsentReason (extensible): Codes specifying why the result (Observation.value[x]) is missing.	Elements differ in comments: 'see `Observation.dataAbsentReason` comments' vs '"Null" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be "detected", "not detected", "inconclusive", or "test not done". The alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code "error" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.' Elements differ in definition for mustSupport: 'true' vs 'false'
interpretation		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.		0..*	CodeableConcept	High, low, normal, etc. Binding: ObservationInterpretationCodes (extensible): Codes identifying interpretations of observations.
referenceRange		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result		0..*	See referenceRange (Observation)	Provides guide for interpretation of component result
Documentation for this format