minimal Common Oncology Data Elements (mCODE) Implementation Guide
2.1.0 - STU 2.1
minimal Common Oncology Data Elements (mCODE) Implementation Guide
2.1.0 - STU 2.1
This page is part of the HL7 FHIR Implementation Guide: minimal Common Oncology Data Elements (mCODE) Release 1 - US Realm | STU1 (v2.1.0: STU 2) based on FHIR R4. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions 
| Active as of 2023-03-21 |
Definitions for the mcode-radiotherapy-modality-and-technique extension.
Guidance on how to interpret the contents of this table can be found here.
| 1. Extension | |
| Definition | Extension capturing modality and technique of a given radiotherapy procedure. The allowed combinations of modality and technique are constrained by invariants, one per modality. Optional Extension Element - found in all resources. |
| Invariants | Defined on this element TechniquesForCarbonIonBeamModality: Allowed Techniques for Carbon Ion Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156505006') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1156529004' or coding.code = '1156528007' or coding.code='1204242009'))) TechniquesForElectronBeamModality: Allowed Techniques for Electron Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '45643008') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1162782007' or coding.code = '1156526006' or coding.code = '168524008'))) TechniquesForHighDoseRate: Allowed Techniques for High Dose Rate (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '394902000') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '1156382005' or coding.code = '113120007' or coding.code = '1156383000' or coding.code = '384691004' or coding.code = '168524008' or coding.code = '14473006'))) TechniquesForHighDoseRateElectronic: Allowed Techniques for High Dose Rate Electronic (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '438629002') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '1156382005' or coding.code = '113120007' or coding.code = '384691004' or coding.code = '168524008' or coding.code = '14473006'))) TechniquesForInternalRadiotherapyPermanentSeeds: Allowed Techniques for Internal Radiotherapy - Permanent Seeds (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '169359004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '113120007'))) TechniquesForLowDoseRateUsingTempRadSource: Allowed Techniques for Low Dose Rate Using Temp Radiation Source (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156708005') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '113120007' or coding.code = '14473006'))) TechniquesForNeutronBeamModality: Allowed Techniques for Neutron Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '80347004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '169317000' or coding.code = '1162782007'))) TechniquesForPhotonBeamModality: Allowed Techniques for Photon Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156506007') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(( coding.code = '441799006' or coding.code = '1156530009' or coding.code = '1162782007' or coding.code = '1156526006' or coding.code = '168524008' or coding.code = '1156530009'))) TechniquesForProtonBeamModality: Allowed Techniques for Proton Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '10611004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1156529004' or coding.code = '1156528007' or coding.code = '1204242009'))) TechniquesForPulsedDoseRate: Allowed Techniques for Pulsed Dose Rate (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156384006') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '113120007'))) TechniquesForRadioPharmaceutical: Allowed Techniques for Radiopharmaceutical (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists( coding.code = '440252007') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '16560241000119104' or coding.code = '1156383000' or coding.code = '384692006' or coding.code = '113120007'))) |
| 2. Extension.extension | |
| Control | 10..* |
| 3. Extension.extension:modality | |
| SliceName | modality |
| Control | 1..1 |
| Type | Extension(RadiotherapyModality) (Extension Type: CodeableConcept) |
| Must Support | true |
| 4. Extension.extension:modality.value[x] | |
| Control | 0..? |
| Binding | The codes SHALL be taken from Radiotherapy Modality Value Set |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| 5. Extension.extension:technique | |
| SliceName | technique |
| Control | 0..* |
| Type | Extension(RadiotherapyTechnique) (Extension Type: CodeableConcept) |
| Must Support | true |
| 6. Extension.extension:technique.value[x] | |
| Control | 0..? |
| Binding | The codes SHALL be taken from Radiotherapy Technique Value Set |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| 7. Extension.url | |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality-and-technique |
| 8. Extension.value[x] | |
| Control | 0..01 |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
Guidance on how to interpret the contents of this table can be found here.
| 1. Extension | |
| Definition | Extension capturing modality and technique of a given radiotherapy procedure. The allowed combinations of modality and technique are constrained by invariants, one per modality. Optional Extension Element - found in all resources. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Invariants | Defined on this element TechniquesForCarbonIonBeamModality: Allowed Techniques for Carbon Ion Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156505006') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1156529004' or coding.code = '1156528007' or coding.code='1204242009'))) TechniquesForElectronBeamModality: Allowed Techniques for Electron Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '45643008') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1162782007' or coding.code = '1156526006' or coding.code = '168524008'))) TechniquesForHighDoseRate: Allowed Techniques for High Dose Rate (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '394902000') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '1156382005' or coding.code = '113120007' or coding.code = '1156383000' or coding.code = '384691004' or coding.code = '168524008' or coding.code = '14473006'))) TechniquesForHighDoseRateElectronic: Allowed Techniques for High Dose Rate Electronic (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '438629002') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '1156382005' or coding.code = '113120007' or coding.code = '384691004' or coding.code = '168524008' or coding.code = '14473006'))) TechniquesForInternalRadiotherapyPermanentSeeds: Allowed Techniques for Internal Radiotherapy - Permanent Seeds (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '169359004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '113120007'))) TechniquesForLowDoseRateUsingTempRadSource: Allowed Techniques for Low Dose Rate Using Temp Radiation Source (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156708005') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '113120007' or coding.code = '14473006'))) TechniquesForNeutronBeamModality: Allowed Techniques for Neutron Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '80347004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '169317000' or coding.code = '1162782007'))) TechniquesForPhotonBeamModality: Allowed Techniques for Photon Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156506007') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(( coding.code = '441799006' or coding.code = '1156530009' or coding.code = '1162782007' or coding.code = '1156526006' or coding.code = '168524008' or coding.code = '1156530009'))) TechniquesForProtonBeamModality: Allowed Techniques for Proton Beam Modality (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '10611004') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '1156529004' or coding.code = '1156528007' or coding.code = '1204242009'))) TechniquesForPulsedDoseRate: Allowed Techniques for Pulsed Dose Rate (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists(coding.system = 'http://snomed.info/sct' and coding.code = '1156384006') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists(coding.system = 'http://snomed.info/sct' and ( coding.code = '384692006' or coding.code = '113120007'))) TechniquesForRadioPharmaceutical: Allowed Techniques for Radiopharmaceutical (: extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').exists() and extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality').value.exists( coding.code = '440252007') implies extension.where(url = 'http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique').value.exists( ( coding.code = '16560241000119104' or coding.code = '1156383000' or coding.code = '384692006' or coding.code = '113120007'))) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 10..* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 3. Extension.extension:modality | |
| SliceName | modality |
| Definition | Extension capturing a modality of external beam or brachytherapy radiation procedures. |
| Control | 1..1 |
| Type | Extension(RadiotherapyModality) (Extension Type: CodeableConcept) |
| Must Support | true |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 4. Extension.extension:modality.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..0* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 5. Extension.extension:modality.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality |
| 6. Extension.extension:modality.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 10..1 |
| Binding | The codes SHALL be taken from Radiotherapy Modality Value SetFor codes, see (unbound) |
| Type | Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 7. Extension.extension:technique | |
| SliceName | technique |
| Definition | Extension capturing a technique of external beam or brachytherapy radiation procedures. |
| Control | 0..* |
| Type | Extension(RadiotherapyTechnique) (Extension Type: CodeableConcept) |
| Must Support | true |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 8. Extension.extension:technique.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Control | 0..0* |
| Type | Extension |
| Summary | false |
| Alternate Names | extensions, user content |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 9. Extension.extension:technique.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique |
| 10. Extension.extension:technique.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 10..1 |
| Binding | The codes SHALL be taken from Radiotherapy Technique Value SetFor codes, see (unbound) |
| Type | Choice of: CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 11. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality-and-technique |
| 12. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here.
| 1. Extension | |
| Definition | Extension capturing modality and technique of a given radiotherapy procedure. The allowed combinations of modality and technique are constrained by invariants, one per modality. |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 3. Extension.extension | |
| Definition | An Extension |
| Control | 1..* |
| Type | Extension |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 4. Extension.extension:modality | |
| SliceName | modality |
| Definition | Extension capturing a modality of external beam or brachytherapy radiation procedures. |
| Control | 1..1 |
| Type | Extension(RadiotherapyModality) (Extension Type: CodeableConcept) |
| Must Support | true |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 5. Extension.extension:modality.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 6. Extension.extension:modality.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 7. Extension.extension:modality.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality |
| 8. Extension.extension:modality.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Radiotherapy Modality Value Set |
| Type | CodeableConcept |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 9. Extension.extension:technique | |
| SliceName | technique |
| Definition | Extension capturing a technique of external beam or brachytherapy radiation procedures. |
| Control | 0..* |
| Type | Extension(RadiotherapyTechnique) (Extension Type: CodeableConcept) |
| Must Support | true |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| 10. Extension.extension:technique.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Control | 0..1 |
| Type | string |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 11. Extension.extension:technique.extension | |
| Definition | An Extension |
| Control | 0..0 |
| Type | Extension |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
| 12. Extension.extension:technique.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-technique |
| 13. Extension.extension:technique.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from Radiotherapy Technique Value Set |
| Type | CodeableConcept |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
| 14. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Control | 1..1 |
| Type | uri |
| XML Representation | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Fixed Value | http://hl7.org/fhir/us/mcode/StructureDefinition/mcode-radiotherapy-modality-and-technique |
| 15. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | See Choice of Data Types for further information about how to use [x] |
| Summary | false |
| Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
IG © 2022+ HL7 International Clinical Interoperability Council. Package hl7.fhir.us.mcode#2.1.0 based on FHIR 4.0.1. Generated 2023-03-21
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change