Quality Measure Implementation Guide (STU3 Ballot)
2.1.0 - ballot

This page is part of the Quality Measure STU2 for FHIR R4 Implementation Guide (v2.1.0: STU3 Ballot 1) based on FHIR R4. The current version which supercedes this version is 3.0.0. For a full list of available versions, see the Directory of published versions

Resource Profile: CQFMComputableMeasure

Defining URL:http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/computable-measure-cqfm
Version:2.1.0
Name:CQFMComputableMeasure
Status:Active as of 2019-02-13
Definition:

The CQFM Computable Measure Profile describes minimum expectations for a computable electronic Clinical Quality Measure (eCQM)

Publisher:Clinical Quality Information WG
Source Resource:XML / JSON / Turtle

The official URL for this profile is:

http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/computable-measure-cqfm

Formal Views of Profile Content

Description of Profiles, Differentials, Snapshots and how the different presentations work.

This structure is derived from CQFMMeasure

NameFlagsCard.TypeDescription & Constraintsdoco
.. Measure 1..1CQFMMeasureA quality measure definition
... cqfm-populationBasis S1..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population

... cqfm-parameter S0..*ParameterDefinitionA parameter to the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-parameter
... cqfm-dataRequirement S0..*DataRequirementRequired data for evaluation
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-dataRequirement
... cqfm-logicDefinition S0..*(Complex)A logic definition used in the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-logicDefinition
... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
... relatedArtifact S0..*(Slice Definition)Additional documentation, citations, etc.
Slice: Unordered, Open by value:type
.... relatedArtifact:dependency 0..*RelatedArtifactAdditional documentation, citations, etc.
..... type S1..1codeRequired dependency
Fixed Value: depends-on
..... display S0..1stringBrief description of the related artifact
..... resource S1..1canonical(Library | CodeSystem | ValueSet)What resource is being referenced
... library S0..1canonical(Library)Logic used by the measure
... scoring S1..1CodeableConceptproportion | ratio | continuous-variable | cohort
... type S1..*CodeableConceptprocess | outcome | structure | patient-reported-outcome | composite
... riskAdjustment 0..1stringHow risk adjustment is applied for this measure
... rateAggregation 0..1stringHow is rate aggregation performed for this measure
... improvementNotation S1..1CodeableConceptincrease | decrease
... group S0..*BackboneElementPopulation criteria group
.... cqfm-populationBasis S0..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population

.... cqfm-scoring S0..1CodeableConceptproportion | ratio | continuous-variable | cohort
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoring
Binding: MeasureScoring (extensible): How the measure calculation is performed

.... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
.... cqfm-type 0..1CodeableConceptprocess | outcome | structure | patient-reported-outcome
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-type
Binding: MeasureType (extensible): Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.

.... cqfm-riskAdjustment 0..1stringHow risk adjustment is applied for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-riskAdjustment
.... cqfm-rateAggregation 0..1stringHow is rate aggregation performed for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation
.... cqfm-improvementNotation S0..1CodeableConceptincrease | decrease
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-improvementNotation
Binding: MeasureImprovementNotation (required): Indicates how to interpret the calculated score of the measure


doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. Measure I1..1CQFMMeasureA quality measure definition
... id Σ0..1stringLogical id of this artifact
... meta SΣ1..1MetaMetadata about the resource
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... versionId Σ0..1idVersion specific identifier
.... lastUpdated Σ0..1instantWhen the resource version last changed
.... source Σ0..1uriIdentifies where the resource comes from
.... profile SΣ1..*canonical(StructureDefinition)Profiles this resource claims to conform to
.... security Σ0..*CodingSecurity Labels applied to this resource
Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.


.... tag Σ0..*CodingTags applied to this resource
Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".


... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred)
Max Binding: AllLanguages: A human language.

... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... cqfm-artifactComment S0..*(Complex)Additional documentation, review, or usage guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment
... cqfm-allocation S0..1markdownAllocation guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-allocation
... cqfm-softwaresystem S0..*Reference(CQFMDevice)Extension
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem
... cqfm-populationBasis S1..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


... cqfm-parameter S0..*ParameterDefinitionA parameter to the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-parameter
... cqfm-dataRequirement S0..*DataRequirementRequired data for evaluation
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-dataRequirement
... cqfm-directReferenceCode S0..*CodingA code directly referenced by the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-directReferenceCode
... cqfm-logicDefinition S0..*(Complex)A logic definition used in the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-logicDefinition
... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... url Σ1..1uriCanonical identifier for this measure, represented as a URI (globally unique)
... identifier SΣ0..*IdentifierAdditional identifier for the measure
... version Σ1..1stringBusiness version of the measure
... name ΣI1..1stringName for this measure (computer friendly)
... title SΣ0..1stringName for this measure (human friendly)
... subtitle 0..1stringSubordinate title of the measure
... status ?!Σ1..1codedraft | active | retired | unknown
Binding: PublicationStatus (required): The lifecycle status of an artifact.

... experimental Σ1..1booleanFor testing purposes, not real usage
... subject[x] 0..1E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device
Binding: SubjectType (extensible): The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.).

.... subjectCodeableConceptCodeableConcept
.... subjectReferenceReference(Group)
... date SΣ0..1dateTimeDate last changed
... publisher Σ1..1stringName of the publisher (organization or individual)
... contact SΣ0..*ContactDetailContact details for the publisher
... description Σ1..1markdownNatural language description of the measure
... useContext SΣ0..*UsageContextThe context that the content is intended to support
... jurisdiction SΣ0..*CodeableConceptIntended jurisdiction for measure (if applicable)
Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use.


... purpose 0..1markdownWhy this measure is defined
... usage 0..1stringDescribes the clinical usage of the measure
... copyright 0..1markdownUse and/or publishing restrictions
... approvalDate 0..1dateWhen the measure was approved by publisher
... lastReviewDate 0..1dateWhen the measure was last reviewed
... effectivePeriod Σ0..1PeriodWhen the measure is expected to be used
... topic 0..*CodeableConceptThe category of the measure, such as Education, Treatment, Assessment, etc.
Binding: DefinitionTopic (example): High-level categorization of the definition, used for searching, sorting, and filtering.


... author 0..*ContactDetailWho authored the content
... editor 0..*ContactDetailWho edited the content
... reviewer 0..*ContactDetailWho reviewed the content
... endorser 0..*ContactDetailWho endorsed the content
... relatedArtifact S0..*(Slice Definition)Additional documentation, citations, etc.
Slice: Unordered, Open by value:type
.... relatedArtifact:dependency 0..*RelatedArtifactAdditional documentation, citations, etc.
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... type SΣ1..1codeRequired dependency
Binding: RelatedArtifactType (required): The type of relationship to the related artifact.


Fixed Value: depends-on
..... label Σ0..1stringShort label
..... display SΣ0..1stringBrief description of the related artifact
..... citation Σ0..1markdownBibliographic citation for the artifact
..... url Σ0..1urlWhere the artifact can be accessed
..... document Σ0..1AttachmentWhat document is being referenced
..... resource SΣ1..1canonical(Library | CodeSystem | ValueSet)What resource is being referenced
... library SI0..1canonical(Library)Logic used by the measure
... disclaimer Σ0..1markdownDisclaimer for use of the measure or its referenced content
... scoring SΣ1..1CodeableConceptproportion | ratio | continuous-variable | cohort
Binding: MeasureScoring (extensible): The scoring type of the measure.

... compositeScoring Σ0..1CodeableConceptopportunity | all-or-nothing | linear | weighted
Binding: CompositeMeasureScoring (extensible): The composite scoring method of the measure.

... type SΣ1..*CodeableConceptprocess | outcome | structure | patient-reported-outcome | composite
Binding: MeasureType (extensible): The type of measure (includes codes from 2.16.840.1.113883.1.11.20368).


... riskAdjustment Σ0..1stringHow risk adjustment is applied for this measure
... rateAggregation Σ0..1stringHow is rate aggregation performed for this measure
... rationale Σ0..1markdownDetailed description of why the measure exists
... clinicalRecommendationStatement Σ0..1markdownSummary of clinical guidelines
... improvementNotation SΣ1..1CodeableConceptincrease | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... definition Σ0..*markdownDefined terms used in the measure documentation
... guidance Σ0..1markdownAdditional guidance for implementers
... group S0..*BackboneElementPopulation criteria group
.... id SI0..1stringUnique id for inter-element referencing
cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group
.... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
.... cqfm-populationBasis S0..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


.... cqfm-scoring S0..1CodeableConceptproportion | ratio | continuous-variable | cohort
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoring
Binding: MeasureScoring (extensible): How the measure calculation is performed


.... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
.... cqfm-type 0..1CodeableConceptprocess | outcome | structure | patient-reported-outcome
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-type
Binding: MeasureType (extensible): Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.


.... cqfm-riskAdjustment 0..1stringHow risk adjustment is applied for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-riskAdjustment
.... cqfm-rateAggregation 0..1stringHow is rate aggregation performed for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation
.... cqfm-improvementNotation S0..1CodeableConceptincrease | decrease
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-improvementNotation
Binding: MeasureImprovementNotation (required): Indicates how to interpret the calculated score of the measure


.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code 0..1CodeableConceptMeaning of the group
.... description 0..1stringSummary description
.... population S1..*BackboneElementPopulation criteria
..... id S1..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... code S1..1CodeableConceptinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population.

..... description 0..1stringThe human readable description of this population criteria
..... criteria SI1..1ExpressionThe criteria that defines this population
cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
.... stratifier S0..*BackboneElementStratifier criteria for the measure
..... id S1..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... code 0..1CodeableConceptMeaning of the stratifier
..... description 0..1stringThe human readable description of this stratifier
..... criteria SI0..1ExpressionHow the measure should be stratified
cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
..... component 0..*BackboneElementStratifier criteria component for the measure
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
...... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
...... code 0..1CodeableConceptMeaning of the stratifier component
...... description 0..1stringThe human readable description of this stratifier component
...... criteria 1..1ExpressionComponent of how the measure should be stratified
... supplementalData SI0..*BackboneElementWhat other data should be reported with the measure
cqm-6: Supplemental data SHALL use either criteria or path
.... id S1..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code 0..1CodeableConceptMeaning of the supplemental data
.... usage 0..*CodeableConceptsupplemental-data | risk-adjustment-factor
Binding: MeasureDataUsage (extensible): The intended usage for supplemental data elements in the measure.


.... description 0..1stringThe human readable description of this supplemental data
.... criteria 1..1ExpressionExpression describing additional data to be reported

doco Documentation for this format
NameFlagsCard.TypeDescription & Constraintsdoco
.. Measure I1..1CQFMMeasureA quality measure definition
... meta Σ1..1MetaMetadata about the resource
.... profile Σ1..*canonical(StructureDefinition)Profiles this resource claims to conform to
... cqfm-artifactComment 0..*(Complex)Additional documentation, review, or usage guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment
... cqfm-allocation 0..1markdownAllocation guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-allocation
... cqfm-populationBasis 1..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


... cqfm-parameter 0..*ParameterDefinitionA parameter to the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-parameter
... cqfm-dataRequirement 0..*DataRequirementRequired data for evaluation
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-dataRequirement
... cqfm-directReferenceCode 0..*CodingA code directly referenced by the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-directReferenceCode
... cqfm-logicDefinition 0..*(Complex)A logic definition used in the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-logicDefinition
... cqfm-scoringUnit 0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
... identifier Σ0..*IdentifierAdditional identifier for the measure
... title Σ0..1stringName for this measure (human friendly)
... date Σ0..1dateTimeDate last changed
... contact Σ0..*ContactDetailContact details for the publisher
... useContext Σ0..*UsageContextThe context that the content is intended to support
... jurisdiction Σ0..*CodeableConceptIntended jurisdiction for measure (if applicable)
Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use.


... relatedArtifact 0..*(Slice Definition)Additional documentation, citations, etc.
Slice: Unordered, Open by value:type
.... relatedArtifact:dependency 0..*RelatedArtifactAdditional documentation, citations, etc.
..... type Σ1..1codeRequired dependency
Binding: RelatedArtifactType (required): The type of relationship to the related artifact.


Fixed Value: depends-on
..... display Σ0..1stringBrief description of the related artifact
..... resource Σ1..1canonical(Library | CodeSystem | ValueSet)What resource is being referenced
... library I0..1canonical(Library)Logic used by the measure
... scoring Σ1..1CodeableConceptproportion | ratio | continuous-variable | cohort
Binding: MeasureScoring (extensible): The scoring type of the measure.

... type Σ1..*CodeableConceptprocess | outcome | structure | patient-reported-outcome | composite
Binding: MeasureType (extensible): The type of measure (includes codes from 2.16.840.1.113883.1.11.20368).


... improvementNotation Σ1..1CodeableConceptincrease | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... group 0..*BackboneElementPopulation criteria group
.... id I0..1stringUnique id for inter-element referencing
cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group
.... cqfm-populationBasis 0..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


.... cqfm-scoring 0..1CodeableConceptproportion | ratio | continuous-variable | cohort
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoring
Binding: MeasureScoring (extensible): How the measure calculation is performed


.... cqfm-scoringUnit 0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
.... cqfm-improvementNotation 0..1CodeableConceptincrease | decrease
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-improvementNotation
Binding: MeasureImprovementNotation (required): Indicates how to interpret the calculated score of the measure


.... population 1..*BackboneElementPopulation criteria
..... id 1..1stringUnique id for inter-element referencing
..... code 1..1CodeableConceptinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population.

..... criteria I1..1ExpressionThe criteria that defines this population
cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
.... stratifier 0..*BackboneElementStratifier criteria for the measure
..... id 1..1stringUnique id for inter-element referencing
..... criteria I0..1ExpressionHow the measure should be stratified
cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
... supplementalData I0..*BackboneElementWhat other data should be reported with the measure
cqm-6: Supplemental data SHALL use either criteria or path
.... id 1..1stringUnique id for inter-element referencing

doco Documentation for this format

Differential View

This structure is derived from CQFMMeasure

NameFlagsCard.TypeDescription & Constraintsdoco
.. Measure 1..1CQFMMeasureA quality measure definition
... cqfm-populationBasis S1..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population

... cqfm-parameter S0..*ParameterDefinitionA parameter to the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-parameter
... cqfm-dataRequirement S0..*DataRequirementRequired data for evaluation
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-dataRequirement
... cqfm-logicDefinition S0..*(Complex)A logic definition used in the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-logicDefinition
... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
... relatedArtifact S0..*(Slice Definition)Additional documentation, citations, etc.
Slice: Unordered, Open by value:type
.... relatedArtifact:dependency 0..*RelatedArtifactAdditional documentation, citations, etc.
..... type S1..1codeRequired dependency
Fixed Value: depends-on
..... display S0..1stringBrief description of the related artifact
..... resource S1..1canonical(Library | CodeSystem | ValueSet)What resource is being referenced
... library S0..1canonical(Library)Logic used by the measure
... scoring S1..1CodeableConceptproportion | ratio | continuous-variable | cohort
... type S1..*CodeableConceptprocess | outcome | structure | patient-reported-outcome | composite
... riskAdjustment 0..1stringHow risk adjustment is applied for this measure
... rateAggregation 0..1stringHow is rate aggregation performed for this measure
... improvementNotation S1..1CodeableConceptincrease | decrease
... group S0..*BackboneElementPopulation criteria group
.... cqfm-populationBasis S0..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population

.... cqfm-scoring S0..1CodeableConceptproportion | ratio | continuous-variable | cohort
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoring
Binding: MeasureScoring (extensible): How the measure calculation is performed

.... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
.... cqfm-type 0..1CodeableConceptprocess | outcome | structure | patient-reported-outcome
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-type
Binding: MeasureType (extensible): Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.

.... cqfm-riskAdjustment 0..1stringHow risk adjustment is applied for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-riskAdjustment
.... cqfm-rateAggregation 0..1stringHow is rate aggregation performed for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation
.... cqfm-improvementNotation S0..1CodeableConceptincrease | decrease
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-improvementNotation
Binding: MeasureImprovementNotation (required): Indicates how to interpret the calculated score of the measure


doco Documentation for this format

Snapshot View

NameFlagsCard.TypeDescription & Constraintsdoco
.. Measure I1..1CQFMMeasureA quality measure definition
... id Σ0..1stringLogical id of this artifact
... meta SΣ1..1MetaMetadata about the resource
.... id 0..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
.... versionId Σ0..1idVersion specific identifier
.... lastUpdated Σ0..1instantWhen the resource version last changed
.... source Σ0..1uriIdentifies where the resource comes from
.... profile SΣ1..*canonical(StructureDefinition)Profiles this resource claims to conform to
.... security Σ0..*CodingSecurity Labels applied to this resource
Binding: All Security Labels (extensible): Security Labels from the Healthcare Privacy and Security Classification System.


.... tag Σ0..*CodingTags applied to this resource
Binding: CommonTags (example): Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".


... implicitRules ?!Σ0..1uriA set of rules under which this content was created
... language 0..1codeLanguage of the resource content
Binding: CommonLanguages (preferred)
Max Binding: AllLanguages: A human language.

... text 0..1NarrativeText summary of the resource, for human interpretation
... contained 0..*ResourceContained, inline Resources
... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
... cqfm-artifactComment S0..*(Complex)Additional documentation, review, or usage guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-artifactComment
... cqfm-allocation S0..1markdownAllocation guidance
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-allocation
... cqfm-softwaresystem S0..*Reference(CQFMDevice)Extension
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-softwaresystem
... cqfm-populationBasis S1..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


... cqfm-parameter S0..*ParameterDefinitionA parameter to the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-parameter
... cqfm-dataRequirement S0..*DataRequirementRequired data for evaluation
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-dataRequirement
... cqfm-directReferenceCode S0..*CodingA code directly referenced by the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-directReferenceCode
... cqfm-logicDefinition S0..*(Complex)A logic definition used in the measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-logicDefinition
... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
... modifierExtension ?!0..*ExtensionExtensions that cannot be ignored
... url Σ1..1uriCanonical identifier for this measure, represented as a URI (globally unique)
... identifier SΣ0..*IdentifierAdditional identifier for the measure
... version Σ1..1stringBusiness version of the measure
... name ΣI1..1stringName for this measure (computer friendly)
... title SΣ0..1stringName for this measure (human friendly)
... subtitle 0..1stringSubordinate title of the measure
... status ?!Σ1..1codedraft | active | retired | unknown
Binding: PublicationStatus (required): The lifecycle status of an artifact.

... experimental Σ1..1booleanFor testing purposes, not real usage
... subject[x] 0..1E.g. Patient, Practitioner, RelatedPerson, Organization, Location, Device
Binding: SubjectType (extensible): The possible types of subjects for a measure (E.g. Patient, Practitioner, Organization, Location, etc.).

.... subjectCodeableConceptCodeableConcept
.... subjectReferenceReference(Group)
... date SΣ0..1dateTimeDate last changed
... publisher Σ1..1stringName of the publisher (organization or individual)
... contact SΣ0..*ContactDetailContact details for the publisher
... description Σ1..1markdownNatural language description of the measure
... useContext SΣ0..*UsageContextThe context that the content is intended to support
... jurisdiction SΣ0..*CodeableConceptIntended jurisdiction for measure (if applicable)
Binding: Jurisdiction ValueSet (extensible): Countries and regions within which this artifact is targeted for use.


... purpose 0..1markdownWhy this measure is defined
... usage 0..1stringDescribes the clinical usage of the measure
... copyright 0..1markdownUse and/or publishing restrictions
... approvalDate 0..1dateWhen the measure was approved by publisher
... lastReviewDate 0..1dateWhen the measure was last reviewed
... effectivePeriod Σ0..1PeriodWhen the measure is expected to be used
... topic 0..*CodeableConceptThe category of the measure, such as Education, Treatment, Assessment, etc.
Binding: DefinitionTopic (example): High-level categorization of the definition, used for searching, sorting, and filtering.


... author 0..*ContactDetailWho authored the content
... editor 0..*ContactDetailWho edited the content
... reviewer 0..*ContactDetailWho reviewed the content
... endorser 0..*ContactDetailWho endorsed the content
... relatedArtifact S0..*(Slice Definition)Additional documentation, citations, etc.
Slice: Unordered, Open by value:type
.... relatedArtifact:dependency 0..*RelatedArtifactAdditional documentation, citations, etc.
..... id 0..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
Slice: Unordered, Open by value:url
..... type SΣ1..1codeRequired dependency
Binding: RelatedArtifactType (required): The type of relationship to the related artifact.


Fixed Value: depends-on
..... label Σ0..1stringShort label
..... display SΣ0..1stringBrief description of the related artifact
..... citation Σ0..1markdownBibliographic citation for the artifact
..... url Σ0..1urlWhere the artifact can be accessed
..... document Σ0..1AttachmentWhat document is being referenced
..... resource SΣ1..1canonical(Library | CodeSystem | ValueSet)What resource is being referenced
... library SI0..1canonical(Library)Logic used by the measure
... disclaimer Σ0..1markdownDisclaimer for use of the measure or its referenced content
... scoring SΣ1..1CodeableConceptproportion | ratio | continuous-variable | cohort
Binding: MeasureScoring (extensible): The scoring type of the measure.

... compositeScoring Σ0..1CodeableConceptopportunity | all-or-nothing | linear | weighted
Binding: CompositeMeasureScoring (extensible): The composite scoring method of the measure.

... type SΣ1..*CodeableConceptprocess | outcome | structure | patient-reported-outcome | composite
Binding: MeasureType (extensible): The type of measure (includes codes from 2.16.840.1.113883.1.11.20368).


... riskAdjustment Σ0..1stringHow risk adjustment is applied for this measure
... rateAggregation Σ0..1stringHow is rate aggregation performed for this measure
... rationale Σ0..1markdownDetailed description of why the measure exists
... clinicalRecommendationStatement Σ0..1markdownSummary of clinical guidelines
... improvementNotation SΣ1..1CodeableConceptincrease | decrease
Binding: MeasureImprovementNotation (required): Observation values that indicate what change in a measurement value or score is indicative of an improvement in the measured item or scored issue.

... definition Σ0..*markdownDefined terms used in the measure documentation
... guidance Σ0..1markdownAdditional guidance for implementers
... group S0..*BackboneElementPopulation criteria group
.... id SI0..1stringUnique id for inter-element referencing
cqm-3: Group identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group
.... extension 0..*ExtensionExtension
Slice: Unordered, Open by value:url
.... cqfm-populationBasis S0..1codeWhat type of population
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-populationBasis
Binding: FHIRAllTypes (required): The type of elements in the population


.... cqfm-scoring S0..1CodeableConceptproportion | ratio | continuous-variable | cohort
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoring
Binding: MeasureScoring (extensible): How the measure calculation is performed


.... cqfm-scoringUnit S0..1CodeableConceptWhat units?
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-scoringUnit
.... cqfm-type 0..1CodeableConceptprocess | outcome | structure | patient-reported-outcome
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-type
Binding: MeasureType (extensible): Indicates whether the measure is used to examine a process, an outcome over time, a patient-reported outcome, or a structure measure such as utilization.


.... cqfm-riskAdjustment 0..1stringHow risk adjustment is applied for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-riskAdjustment
.... cqfm-rateAggregation 0..1stringHow is rate aggregation performed for this measure
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-rateAggregation
.... cqfm-improvementNotation S0..1CodeableConceptincrease | decrease
URL: http://hl7.org/fhir/us/cqfmeasures/StructureDefinition/cqfm-improvementNotation
Binding: MeasureImprovementNotation (required): Indicates how to interpret the calculated score of the measure


.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code 0..1CodeableConceptMeaning of the group
.... description 0..1stringSummary description
.... population S1..*BackboneElementPopulation criteria
..... id S1..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... code S1..1CodeableConceptinitial-population | numerator | numerator-exclusion | denominator | denominator-exclusion | denominator-exception | measure-population | measure-population-exclusion | measure-observation
Binding: MeasurePopulationType (extensible): The type of population.

..... description 0..1stringThe human readable description of this population criteria
..... criteria SI1..1ExpressionThe criteria that defines this population
cqm-4: Group population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
.... stratifier S0..*BackboneElementStratifier criteria for the measure
..... id S1..1stringUnique id for inter-element referencing
..... extension 0..*ExtensionAdditional content defined by implementations
..... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
..... code 0..1CodeableConceptMeaning of the stratifier
..... description 0..1stringThe human readable description of this stratifier
..... criteria SI0..1ExpressionHow the measure should be stratified
cqm-5: Group stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
..... component 0..*BackboneElementStratifier criteria component for the measure
...... id 0..1stringUnique id for inter-element referencing
...... extension 0..*ExtensionAdditional content defined by implementations
...... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
...... code 0..1CodeableConceptMeaning of the stratifier component
...... description 0..1stringThe human readable description of this stratifier component
...... criteria 1..1ExpressionComponent of how the measure should be stratified
... supplementalData SI0..*BackboneElementWhat other data should be reported with the measure
cqm-6: Supplemental data SHALL use either criteria or path
.... id S1..1stringUnique id for inter-element referencing
.... extension 0..*ExtensionAdditional content defined by implementations
.... modifierExtension ?!Σ0..*ExtensionExtensions that cannot be ignored even if unrecognized
.... code 0..1CodeableConceptMeaning of the supplemental data
.... usage 0..*CodeableConceptsupplemental-data | risk-adjustment-factor
Binding: MeasureDataUsage (extensible): The intended usage for supplemental data elements in the measure.


.... description 0..1stringThe human readable description of this supplemental data
.... criteria 1..1ExpressionExpression describing additional data to be reported

doco Documentation for this format

 

Other representations of profile: Schematron

Terminology Bindings

PathConformanceValueSet / Code
Measure.meta.securityextensibleAll Security Labels
Measure.meta.tagexampleCommonTags
Measure.languagepreferredCommonLanguages
Max Binding: AllLanguages
Measure.statusrequiredPublicationStatus
Measure.subject[x]extensibleSubjectType
Measure.jurisdictionextensibleJurisdiction ValueSet
Measure.topicexampleDefinitionTopic
Measure.relatedArtifact:dependency.typerequiredFixed Value: depends-on
Measure.scoringextensibleMeasureScoring
Measure.compositeScoringextensibleCompositeMeasureScoring
Measure.typeextensibleMeasureType
Measure.improvementNotationrequiredMeasureImprovementNotation
Measure.group.population.codeextensibleMeasurePopulationType
Measure.supplementalData.usageextensibleMeasureDataUsage

Constraints

IdPathDetailsRequirements
dom-2MeasureIf the resource is contained in another resource, it SHALL NOT contain nested Resources
: contained.contained.empty()
dom-3MeasureIf the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource
: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()
dom-4MeasureIf a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated
: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()
dom-5MeasureIf a resource is contained in another resource, it SHALL NOT have a security label
: contained.meta.security.empty()
dom-6MeasureA resource should have narrative for robust management
: text.`div`.exists()
mea-0MeasureName should be usable as an identifier for the module by machine processing applications such as code generation
: name.matches('[A-Z]([A-Za-z0-9_]){0,254}')
mea-1MeasureStratifier SHALL be either a single criteria or a set of criteria components
: group.stratifier.all((code | description | criteria).exists() xor component.exists())
ele-1Measure.metaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.meta.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.meta.versionIdAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.lastUpdatedAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.sourceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.profileAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.securityAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.meta.tagAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.implicitRulesAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.languageAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.textAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:commentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:commentMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:allocationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:allocationMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:softwaresystemAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:softwaresystemMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:populationBasisAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:populationBasisMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:parameterAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:parameterMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:dataRequirementAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:dataRequirementMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:directReferenceCodeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:directReferenceCodeMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:logicDefinitionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:logicDefinitionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.extension:scoringUnitAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.extension:scoringUnitMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.urlAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.identifierAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.versionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.nameAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.titleAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.subtitleAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.statusAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.experimentalAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.subject[x]All FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.dateAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.publisherAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.contactAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.useContextAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.jurisdictionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.purposeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.usageAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.copyrightAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.approvalDateAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.lastReviewDateAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.effectivePeriodAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.topicAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.authorAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.editorAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.reviewerAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.endorserAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifactAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependencyAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.relatedArtifact:dependency.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.relatedArtifact:dependency.typeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.labelAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.displayAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.citationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.urlAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.documentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.relatedArtifact:dependency.resourceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.libraryAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
cqm-2Measure.libraryMeasures utilizing CQL SHALL reference one and only one CQL library (and that referenced library MUST be the primary library for the measure)
: exists()
ele-1Measure.disclaimerAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.scoringAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.compositeScoringAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.typeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.riskAdjustmentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.rateAggregationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.rationaleAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.clinicalRecommendationStatementAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.improvementNotationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.definitionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.guidanceAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.groupAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
cqm-3Measure.group.idGroup identifiers SHOULD use the convention: "group-[group number]", where [group number] corresponds with the group naming convention for the criteria within the group
: value.startsWith('group-')
ele-1Measure.group.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:populationBasisAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:populationBasisMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:scoringAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:scoringMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:scoringUnitAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:scoringUnitMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:typeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:typeMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:riskAdjustmentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:riskAdjustmentMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:rateAggregationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:rateAggregationMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.extension:improvementNotationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.extension:improvementNotationMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.populationAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.population.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.population.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.population.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.population.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.population.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.population.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.population.criteriaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
cqm-4Measure.group.population.criteriaGroup population criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
: value.startsWith(library).not()
ele-1Measure.group.stratifierAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.stratifier.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.stratifier.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.stratifier.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.stratifier.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.criteriaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
cqm-5Measure.group.stratifier.criteriaGroup stratifier criteria SHOULD be simple expression names found within the primary library for the measure. The criteria SHOULD NOT include a namespace.
: value.startsWith(library).not()
ele-1Measure.group.stratifier.componentAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.component.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.stratifier.component.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.stratifier.component.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.group.stratifier.component.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.group.stratifier.component.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.component.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.group.stratifier.component.criteriaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.supplementalDataAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
cqm-6Measure.supplementalDataSupplemental data SHALL use either criteria or path
: criteria.exists() or path.exists()
ele-1Measure.supplementalData.extensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.supplementalData.extensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.supplementalData.modifierExtensionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ext-1Measure.supplementalData.modifierExtensionMust have either extensions or value[x], not both
: extension.exists() != value.exists()
ele-1Measure.supplementalData.codeAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.supplementalData.usageAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.supplementalData.descriptionAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())
ele-1Measure.supplementalData.criteriaAll FHIR elements must have a @value or children
: hasValue() or (children().count() > id.count())