Release 4B

This page is part of the FHIR Specification (v4.3.0: R4B - STU). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

7.3 Resource TestScript - Content

FHIR Infrastructure Work GroupMaturity Level: 2 Trial UseSecurity Category: Anonymous Compartments: Not linked to any defined compartments

A structured set of tests against a FHIR server or client implementation to determine compliance against the FHIR specification.

7.3.1 Scope and Usage

The TestScript resource is used to define tests that can be executed on one or more FHIR servers. The TestScript resource would typically contain

  • a list of fixtures (required resources used in the tests)
  • setup procedures
  • a suite of thematically related tests
  • teardown procedures

For example, one TestScript might feature a set of tests focusing on searching Patients and validating the Bundle responses. The fixtures for such a test would contain a list of Patient resources that are required for the test to complete successfully. The setup procedures create the fixtures on the FHIR server being tested. A series of tests execute various search parameters and search for the fixtures in the results. The teardown procedures would then clean up (delete) the fixtures on FHIR server that were created during the setup procedures.

The purpose of the TestScript is to encode in an executable representation tests that can be used to

  1. determine whether a given FHIR server adheres to the FHIR specification and
  2. determine whether two or more FHIR servers implement capabilities in a compatible or interoperable manner.
It might not be possible to fully automate the latter goal (especially with regards to business rules that might ride on top of different implementations), however the tests should be able to determine whether two servers support the operations, value sets, profiles, and extensions to exchange Bundles of Resources (such as returned from the Patient $everything operation).

7.3.2 Boundaries and Relationships

The TestScript resource should NOT be used to represent Clinical tests, Prescriptions, or any other Healthcare related concept. The TestScript resource is an infrastructure support resource used to represent standardized tests to determine an implementation's level of adherence to the FHIR specification.

TestScript is a part of the conformance framework and is used to validate the behavior of FHIR systems, specifically their correct implementation of StructureDefinition, ValueSet, OperationDefinition, CapabilityStatement and other FHIR resources that govern system behavior. TestScript instances may be included as part of ImplementationGuides to help define and test the desired behavior of systems that choose to comply with the implementation guide.

The following resources represent the FHIR conformance framework that are used to express the expected behavior of a FHIR compliant system:

7.3.3 Background and Context

7.3.3.1 Background

The TestScript resource is designed to establish testing as a first class artifact within the FHIR specification. This resource allows defining a suite of tests that can be executed on one or more FHIR servers and clients.

Implementers should be familiar with the testing concepts and descriptions found in Testing FHIR before working with this resource.

7.3.4 References

This resource is referenced by TestReport.

This resource does not implement any patterns.

7.3.5 Resource Content

Structure

NameFlagsCard.TypeDescription & Constraintsdoco
.. TestScript TUDomainResourceDescribes a set of tests
+ Warning: Name should be usable as an identifier for the module by machine processing applications such as code generation
Elements defined in Ancestors: id, meta, implicitRules, language, text, contained, extension, modifierExtension
... url Σ1..1uriCanonical identifier for this test script, represented as a URI (globally unique)
... identifier Σ0..1IdentifierAdditional identifier for the test script
... version Σ0..1stringBusiness version of the test script
... title Σ0..1stringName for this test script (human friendly)
... status ?!Σ1..1codedraft | active | retired | unknown
PublicationStatus (Required)
... experimental Σ0..1booleanFor testing purposes, not real usage
... date Σ0..1dateTimeDate last changed
... publisher Σ0..1stringName of the publisher (organization or individual)
... contact Σ0..*ContactDetailContact details for the publisher
... description 0..1markdownNatural language description of the test script
... useContext Σ0..*UsageContextThe context that the content is intended to support
... jurisdiction Σ0..*CodeableConceptIntended jurisdiction for test script (if applicable)
Jurisdiction (Extensible)
... purpose 0..1markdownWhy this test script is defined
... copyright 0..1markdownUse and/or publishing restrictions
... origin 0..*BackboneElementAn abstract server representing a client or sender in a message exchange
.... index 1..1integerThe index of the abstract origin server starting at 1
.... profile 1..1CodingFHIR-Client | FHIR-SDC-FormFiller
TestScriptProfileOriginType (Extensible)
... destination 0..*BackboneElementAn abstract server representing a destination or receiver in a message exchange
.... index 1..1integerThe index of the abstract destination server starting at 1
.... profile 1..1CodingFHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
TestScriptProfileDestinationType (Extensible)
... metadata I0..1BackboneElementRequired capability that is assumed to function correctly on the FHIR server being tested
+ Rule: TestScript metadata capability SHALL contain required or validated or both.
.... link 0..*BackboneElementLinks to the FHIR specification
..... url 1..1uriURL to the specification
..... description 0..1stringShort description
.... capability 1..*BackboneElementCapabilities that are assumed to function correctly on the FHIR server being tested
..... required 1..1booleanAre the capabilities required?
..... validated 1..1booleanAre the capabilities validated?
..... description 0..1stringThe expected capabilities of the server
..... origin 0..*integerWhich origin server these requirements apply to
..... destination 0..1integerWhich server these requirements apply to
..... link 0..*uriLinks to the FHIR specification
..... capabilities 1..1canonical(CapabilityStatement)Required Capability Statement
... fixture 0..*BackboneElementFixture in the test script - by reference (uri)
.... autocreate 1..1booleanWhether or not to implicitly create the fixture during setup
.... autodelete 1..1booleanWhether or not to implicitly delete the fixture during teardown
.... resource 0..1Reference(Any)Reference of the resource
... profile 0..*Reference(Any)Reference of the validation profile
... variable I0..*BackboneElementPlaceholder for evaluated elements
+ Rule: Variable can only contain one of expression, headerField or path.
.... name 1..1stringDescriptive name for this variable
.... defaultValue 0..1stringDefault, hard-coded, or user-defined value for this variable
.... description 0..1stringNatural language description of the variable
.... expression 0..1stringThe FHIRPath expression against the fixture body
.... headerField 0..1stringHTTP header field name for source
.... hint 0..1stringHint help text for default value to enter
.... path 0..1stringXPath or JSONPath against the fixture body
.... sourceId 0..1idFixture Id of source expression or headerField within this variable
... setup 0..1BackboneElementA series of required setup operations before tests are executed
.... action I1..*BackboneElementA setup operation or assert to perform
+ Rule: Setup action SHALL contain either an operation or assert but not both.
..... operation I0..1BackboneElementThe setup operation to perform
+ Rule: Setup operation SHALL contain either sourceId or targetId or params or url.
...... type 0..1CodingThe operation code type that will be executed
TestScriptOperationCode (Extensible)
...... resource 0..1codeResource type
FHIRDefinedType (Required)
...... label 0..1stringTracking/logging operation label
...... description 0..1stringTracking/reporting operation description
...... accept 0..1codeMime type to accept in the payload of the response, with charset etc.
MimeType (Required)
...... contentType 0..1codeMime type of the request payload contents, with charset etc.
MimeType (Required)
...... destination 0..1integerServer responding to the request
...... encodeRequestUrl 1..1booleanWhether or not to send the request url in encoded format
...... method 0..1codedelete | get | options | patch | post | put | head
TestScriptRequestMethodCode (Required)
...... origin 0..1integerServer initiating the request
...... params 0..1stringExplicitly defined path parameters
...... requestHeader 0..*BackboneElementEach operation can have one or more header elements
....... field 1..1stringHTTP header field name
....... value 1..1stringHTTP headerfield value
...... requestId 0..1idFixture Id of mapped request
...... responseId 0..1idFixture Id of mapped response
...... sourceId 0..1idFixture Id of body for PUT and POST requests
...... targetId 0..1idId of fixture used for extracting the [id], [type], and [vid] for GET requests
...... url 0..1stringRequest URL
..... assert I0..1BackboneElementThe assertion to perform
+ Rule: Only a single assertion SHALL be present within setup action assert element.
+ Rule: Setup action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.
+ Rule: Setup action assert response and responseCode SHALL be empty when direction equals request
...... label 0..1stringTracking/logging assertion label
...... description 0..1stringTracking/reporting assertion description
...... direction 0..1coderesponse | request
AssertionDirectionType (Required)
...... compareToSourceId 0..1stringId of the source fixture to be evaluated
...... compareToSourceExpression 0..1stringThe FHIRPath expression to evaluate against the source fixture
...... compareToSourcePath 0..1stringXPath or JSONPath expression to evaluate against the source fixture
...... contentType 0..1codeMime type to compare against the 'Content-Type' header
MimeType (Required)
...... expression 0..1stringThe FHIRPath expression to be evaluated
...... headerField 0..1stringHTTP header field name
...... minimumId 0..1stringFixture Id of minimum content resource
...... navigationLinks 0..1booleanPerform validation on navigation links?
...... operator 0..1codeequals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
AssertionOperatorType (Required)
...... path 0..1stringXPath or JSONPath expression
...... requestMethod 0..1codedelete | get | options | patch | post | put | head
TestScriptRequestMethodCode (Required)
...... requestURL 0..1stringRequest URL comparison value
...... resource 0..1codeResource type
FHIRDefinedType (Required)
...... response 0..1codeokay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
AssertionResponseTypes (Required)
...... responseCode 0..1stringHTTP response code to test
...... sourceId 0..1idFixture Id of source expression or headerField
...... validateProfileId 0..1idProfile Id of validation profile reference
...... value 0..1stringThe value to compare to
...... warningOnly 1..1booleanWill this assert produce a warning only on error?
... test 0..*BackboneElementA test in this script
.... name 0..1stringTracking/logging name of this test
.... description 0..1stringTracking/reporting short description of the test
.... action I1..*BackboneElementA test operation or assert to perform
+ Rule: Test action SHALL contain either an operation or assert but not both.
..... operation I0..1see operationThe setup operation to perform
+ Rule: Test operation SHALL contain either sourceId or targetId or params or url.
..... assert I0..1see assertThe setup assertion to perform
+ Rule: Only a single assertion SHALL be present within test action assert element.
+ Rule: Test action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.
+ Rule: Test action assert response and response and responseCode SHALL be empty when direction equals request
... teardown 0..1BackboneElementA series of required clean up steps
.... action 1..*BackboneElementOne or more teardown operations to perform
..... operation I1..1see operationThe teardown operation to perform
+ Rule: Teardown operation SHALL contain either sourceId or targetId or params or url.

doco Documentation for this format

UML Diagram (Legend)

TestScript (DomainResource)An absolute URI that is used to identify this test script when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this test script is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the test script is stored on different serversurl : uri [1..1]A formal identifier that is used to identify this test script when it is represented in other formats, or referenced in a specification, model, design or an instanceidentifier : Identifier [0..1]The identifier that is used to identify this version of the test script when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the test script author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequenceversion : string [0..1]A natural language name identifying the test script. This name should be usable as an identifier for the module by machine processing applications such as code generationname : string [1..1]A short, descriptive, user-friendly title for the test scripttitle : string [0..1]The status of this test script. Enables tracking the life-cycle of the content (this element modifies the meaning of other elements)status : code [1..1] « null (Strength=Required)PublicationStatus! »A Boolean value to indicate that this test script is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usageexperimental : boolean [0..1]The date (and optionally time) when the test script was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the test script changesdate : dateTime [0..1]The name of the organization or individual that published the test scriptpublisher : string [0..1]Contact details to assist a user in finding and communicating with the publishercontact : ContactDetail [0..*]A free text natural language description of the test script from a consumer's perspectivedescription : markdown [0..1]The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate test script instancesuseContext : UsageContext [0..*]A legal or geographic region in which the test script is intended to be usedjurisdiction : CodeableConcept [0..*] « null (Strength=Extensible)Jurisdiction ValueSet+ »Explanation of why this test script is needed and why it has been designed as it haspurpose : markdown [0..1]A copyright statement relating to the test script and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the test scriptcopyright : markdown [0..1]Reference to the profile to be used for validationprofile : Reference [0..*] « Any »OriginAbstract name given to an origin server in this test script. The name is provided as a number starting at 1index : integer [1..1]The type of origin profile the test system supportsprofile : Coding [1..1] « null (Strength=Extensible)TestScriptProfileOriginType+ »DestinationAbstract name given to a destination server in this test script. The name is provided as a number starting at 1index : integer [1..1]The type of destination profile the test system supportsprofile : Coding [1..1] « null (Strength=Extensible)TestScriptProfileDestinationT...+ »MetadataLinkURL to a particular requirement or feature within the FHIR specificationurl : uri [1..1]Short description of the linkdescription : string [0..1]CapabilityWhether or not the test execution will require the given capabilities of the server in order for this test script to executerequired : boolean [1..1]Whether or not the test execution will validate the given capabilities of the server in order for this test script to executevalidated : boolean [1..1]Description of the capabilities that this test script is requiring the server to supportdescription : string [0..1]Which origin server these requirements apply toorigin : integer [0..*]Which server these requirements apply todestination : integer [0..1]Links to the FHIR specification that describes this interaction and the resources involved in more detaillink : uri [0..*]Minimum capabilities required of server for test script to execute successfully. If server does not meet at a minimum the referenced capability statement, then all tests in this script are skippedcapabilities : canonical [1..1] « CapabilityStatement »FixtureWhether or not to implicitly create the fixture during setup. If true, the fixture is automatically created on each server being tested during setup, therefore no create operation is required for this fixture in the TestScript.setup sectionautocreate : boolean [1..1]Whether or not to implicitly delete the fixture during teardown. If true, the fixture is automatically deleted on each server being tested during teardown, therefore no delete operation is required for this fixture in the TestScript.teardown sectionautodelete : boolean [1..1]Reference to the resource (containing the contents of the resource needed for operations)resource : Reference [0..1] « Any »VariableDescriptive name for this variablename : string [1..1]A default, hard-coded, or user-defined value for this variabledefaultValue : string [0..1]A free text natural language description of the variable and its purposedescription : string [0..1]The FHIRPath expression to evaluate against the fixture body. When variables are defined, only one of either expression, headerField or path must be specifiedexpression : string [0..1]Will be used to grab the HTTP header field value from the headers that sourceId is pointing toheaderField : string [0..1]Displayable text string with hint help information to the user when entering a default valuehint : string [0..1]XPath or JSONPath to evaluate against the fixture body. When variables are defined, only one of either expression, headerField or path must be specifiedpath : string [0..1]Fixture to evaluate the XPath/JSONPath expression or the headerField against within this variablesourceId : id [0..1]SetupSetupActionOperationServer interaction or operation typetype : Coding [0..1] « null (Strength=Extensible)TestScriptOperationCode+ »The type of the resource. See http://build.fhir.org/resourcelist.htmlresource : code [0..1] « null (Strength=Required)FHIRDefinedType! »The label would be used for tracking/logging purposes by test engineslabel : string [0..1]The description would be used by test engines for tracking and reporting purposesdescription : string [0..1]The mime-type to use for RESTful operation in the 'Accept' headeraccept : code [0..1] « null (Strength=Required)Mime Types! »The mime-type to use for RESTful operation in the 'Content-Type' headercontentType : code [0..1] « null (Strength=Required)Mime Types! »The server where the request message is destined for. Must be one of the server numbers listed in TestScript.destination sectiondestination : integer [0..1]Whether or not to implicitly send the request url in encoded format. The default is true to match the standard RESTful client behavior. Set to false when communicating with a server that does not support encoded url pathsencodeRequestUrl : boolean [1..1]The HTTP method the test engine MUST use for this operation regardless of any other operation detailsmethod : code [0..1] « null (Strength=Required)TestScriptRequestMethodCode! »The server where the request message originates from. Must be one of the server numbers listed in TestScript.origin sectionorigin : integer [0..1]Path plus parameters after [type]. Used to set parts of the request URL explicitlyparams : string [0..1]The fixture id (maybe new) to map to the requestrequestId : id [0..1]The fixture id (maybe new) to map to the responseresponseId : id [0..1]The id of the fixture used as the body of a PUT or POST requestsourceId : id [0..1]Id of fixture used for extracting the [id], [type], and [vid] for GET requeststargetId : id [0..1]Complete request URLurl : string [0..1]RequestHeaderThe HTTP header field e.g. "Accept"field : string [1..1]The value of the header e.g. "application/fhir+xml"value : string [1..1]AssertThe label would be used for tracking/logging purposes by test engineslabel : string [0..1]The description would be used by test engines for tracking and reporting purposesdescription : string [0..1]The direction to use for the assertiondirection : code [0..1] « null (Strength=Required)AssertionDirectionType! »Id of the source fixture used as the contents to be evaluated by either the "source/expression" or "sourceId/path" definitioncompareToSourceId : string [0..1]The FHIRPath expression to evaluate against the source fixture. When compareToSourceId is defined, either compareToSourceExpression or compareToSourcePath must be defined, but not bothcompareToSourceExpression : string [0..1]XPath or JSONPath expression to evaluate against the source fixture. When compareToSourceId is defined, either compareToSourceExpression or compareToSourcePath must be defined, but not bothcompareToSourcePath : string [0..1]The mime-type contents to compare against the request or response message 'Content-Type' headercontentType : code [0..1] « null (Strength=Required)Mime Types! »The FHIRPath expression to be evaluated against the request or response message contents - HTTP headers and payloadexpression : string [0..1]The HTTP header field name e.g. 'Location'headerField : string [0..1]The ID of a fixture. Asserts that the response contains at a minimum the fixture specified by minimumIdminimumId : string [0..1]Whether or not the test execution performs validation on the bundle navigation linksnavigationLinks : boolean [0..1]The operator type defines the conditional behavior of the assert. If not defined, the default is equalsoperator : code [0..1] « null (Strength=Required)AssertionOperatorType! »The XPath or JSONPath expression to be evaluated against the fixture representing the response received from serverpath : string [0..1]The request method or HTTP operation code to compare against that used by the client system under testrequestMethod : code [0..1] « null (Strength=Required)TestScriptRequestMethodCode! »The value to use in a comparison against the request URL path stringrequestURL : string [0..1]The type of the resource. See http://build.fhir.org/resourcelist.htmlresource : code [0..1] « null (Strength=Required)FHIRDefinedType! »okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessableresponse : code [0..1] « null (Strength=Required)AssertionResponseTypes! »The value of the HTTP response code to be testedresponseCode : string [0..1]Fixture to evaluate the XPath/JSONPath expression or the headerField againstsourceId : id [0..1]The ID of the Profile to validate againstvalidateProfileId : id [0..1]The value to compare tovalue : string [0..1]Whether or not the test execution will produce a warning only on error for this assertwarningOnly : boolean [1..1]TestThe name of this test used for tracking/logging purposes by test enginesname : string [0..1]A short description of the test used by test engines for tracking and reporting purposesdescription : string [0..1]TestActionTeardownTeardownActionAn abstract server used in operations within this test script in the origin elementorigin[0..*]An abstract server used in operations within this test script in the destination elementdestination[0..*]A link to the FHIR specification that this test is coveringlink[0..*]Capabilities that must exist and are assumed to function correctly on the FHIR server being testedcapability[1..*]The required capability must exist and are assumed to function correctly on the FHIR server being testedmetadata[0..1]Fixture in the test script - by reference (uri). All fixtures are required for the test script to executefixture[0..*]Variable is set based either on element value in response body or on header field value in the response headersvariable[0..*]Header elements would be used to set HTTP headersrequestHeader[0..*]The operation to performoperation[0..1]Evaluates the results of previous operations to determine if the server under test behaves appropriatelyassert[0..1]Action would contain either an operation or an assertionaction[1..*]A series of required setup operations before tests are executedsetup[0..1]An operation would involve a REST request to a serveroperation[0..1]Evaluates the results of previous operations to determine if the server under test behaves appropriatelyassert[0..1]Action would contain either an operation or an assertionaction[1..*]A test in this scripttest[0..*]An operation would involve a REST request to a serveroperation[1..1]The teardown action will only contain an operationaction[1..*]A series of operations required to clean up after all the tests are executed (successfully or otherwise)teardown[0..1]

XML Template

<TestScript xmlns="http://hl7.org/fhir"> doco
 <!-- from Resource: id, meta, implicitRules, and language -->
 <!-- from DomainResource: text, contained, extension, and modifierExtension -->
 <url value="[uri]"/><!-- 1..1 Canonical identifier for this test script, represented as a URI (globally unique) -->
 <identifier><!-- 0..1 Identifier Additional identifier for the test script --></identifier>
 <version value="[string]"/><!-- 0..1 Business version of the test script -->
 <name value="[string]"/><!-- 1..1 Name for this test script (computer friendly) -->
 <title value="[string]"/><!-- 0..1 Name for this test script (human friendly) -->
 <status value="[code]"/><!-- 1..1 draft | active | retired | unknown -->
 <experimental value="[boolean]"/><!-- 0..1 For testing purposes, not real usage -->
 <date value="[dateTime]"/><!-- 0..1 Date last changed -->
 <publisher value="[string]"/><!-- 0..1 Name of the publisher (organization or individual) -->
 <contact><!-- 0..* ContactDetail Contact details for the publisher --></contact>
 <description value="[markdown]"/><!-- 0..1 Natural language description of the test script -->
 <useContext><!-- 0..* UsageContext The context that the content is intended to support --></useContext>
 <jurisdiction><!-- 0..* CodeableConcept Intended jurisdiction for test script (if applicable) --></jurisdiction>
 <purpose value="[markdown]"/><!-- 0..1 Why this test script is defined -->
 <copyright value="[markdown]"/><!-- 0..1 Use and/or publishing restrictions -->
 <origin>  <!-- 0..* An abstract server representing a client or sender in a message exchange -->
  <index value="[integer]"/><!-- 1..1 The index of the abstract origin server starting at 1 -->
  <profile><!-- 1..1 Coding FHIR-Client | FHIR-SDC-FormFiller --></profile>
 </origin>
 <destination>  <!-- 0..* An abstract server representing a destination or receiver in a message exchange -->
  <index value="[integer]"/><!-- 1..1 The index of the abstract destination server starting at 1 -->
  <profile><!-- 1..1 Coding FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor --></profile>
 </destination>
 <metadata>  <!-- 0..1 Required capability that is assumed to function correctly on the FHIR server being tested -->
  <link>  <!-- 0..* Links to the FHIR specification -->
   <url value="[uri]"/><!-- 1..1 URL to the specification -->
   <description value="[string]"/><!-- 0..1 Short description -->
  </link>
  <capability>  <!-- 1..* Capabilities  that are assumed to function correctly on the FHIR server being tested -->
   <required value="[boolean]"/><!-- 1..1 Are the capabilities required? -->
   <validated value="[boolean]"/><!-- 1..1 Are the capabilities validated? -->
   <description value="[string]"/><!-- 0..1 The expected capabilities of the server -->
   <origin value="[integer]"/><!-- 0..* Which origin server these requirements apply to -->
   <destination value="[integer]"/><!-- 0..1 Which server these requirements apply to -->
   <link value="[uri]"/><!-- 0..* Links to the FHIR specification -->
   <capabilities><!-- 1..1 canonical(CapabilityStatement) Required Capability Statement --></capabilities>
  </capability>
 </metadata>
 <fixture>  <!-- 0..* Fixture in the test script - by reference (uri) -->
  <autocreate value="[boolean]"/><!-- 1..1 Whether or not to implicitly create the fixture during setup -->
  <autodelete value="[boolean]"/><!-- 1..1 Whether or not to implicitly delete the fixture during teardown -->
  <resource><!-- 0..1 Reference(Any) Reference of the resource --></resource>
 </fixture>
 <profile><!-- 0..* Reference(Any) Reference of the validation profile --></profile>
 <variable>  <!-- 0..* Placeholder for evaluated elements -->
  <name value="[string]"/><!-- 1..1 Descriptive name for this variable -->
  <defaultValue value="[string]"/><!-- 0..1 Default, hard-coded, or user-defined value for this variable -->
  <description value="[string]"/><!-- 0..1 Natural language description of the variable -->
  <expression value="[string]"/><!-- 0..1 The FHIRPath expression against the fixture body -->
  <headerField value="[string]"/><!-- 0..1 HTTP header field name for source -->
  <hint value="[string]"/><!-- 0..1 Hint help text for default value to enter -->
  <path value="[string]"/><!-- 0..1 XPath or JSONPath against the fixture body -->
  <sourceId value="[id]"/><!-- 0..1 Fixture Id of source expression or headerField within this variable -->
 </variable>
 <setup>  <!-- 0..1 A series of required setup operations before tests are executed -->
  <action>  <!-- 1..* A setup operation or assert to perform -->
   <operation>  <!-- 0..1 The setup operation to perform -->
    <type><!-- 0..1 Coding The operation code type that will be executed --></type>
    <resource value="[code]"/><!-- 0..1 Resource type -->
    <label value="[string]"/><!-- 0..1 Tracking/logging operation label -->
    <description value="[string]"/><!-- 0..1 Tracking/reporting operation description -->
    <accept value="[code]"/><!-- 0..1 Mime type to accept in the payload of the response, with charset etc. -->
    <contentType value="[code]"/><!-- 0..1 Mime type of the request payload contents, with charset etc. -->
    <destination value="[integer]"/><!-- 0..1 Server responding to the request -->
    <encodeRequestUrl value="[boolean]"/><!-- 1..1 Whether or not to send the request url in encoded format -->
    <method value="[code]"/><!-- 0..1 delete | get | options | patch | post | put | head -->
    <origin value="[integer]"/><!-- 0..1 Server initiating the request -->
    <params value="[string]"/><!-- 0..1 Explicitly defined path parameters -->
    <requestHeader>  <!-- 0..* Each operation can have one or more header elements -->
     <field value="[string]"/><!-- 1..1 HTTP header field name -->
     <value value="[string]"/><!-- 1..1 HTTP headerfield value -->
    </requestHeader>
    <requestId value="[id]"/><!-- 0..1 Fixture Id of mapped request -->
    <responseId value="[id]"/><!-- 0..1 Fixture Id of mapped response -->
    <sourceId value="[id]"/><!-- 0..1 Fixture Id of body for PUT and POST requests -->
    <targetId value="[id]"/><!-- 0..1 Id of fixture used for extracting the [id],  [type], and [vid] for GET requests -->
    <url value="[string]"/><!-- 0..1 Request URL -->
   </operation>
   <assert>  <!-- 0..1 The assertion to perform -->
    <label value="[string]"/><!-- 0..1 Tracking/logging assertion label -->
    <description value="[string]"/><!-- 0..1 Tracking/reporting assertion description -->
    <direction value="[code]"/><!-- 0..1 response | request -->
    <compareToSourceId value="[string]"/><!-- 0..1 Id of the source fixture to be evaluated -->
    <compareToSourceExpression value="[string]"/><!-- 0..1 The FHIRPath expression to evaluate against the source fixture -->
    <compareToSourcePath value="[string]"/><!-- 0..1 XPath or JSONPath expression to evaluate against the source fixture -->
    <contentType value="[code]"/><!-- 0..1 Mime type to compare against the 'Content-Type' header -->
    <expression value="[string]"/><!-- 0..1 The FHIRPath expression to be evaluated -->
    <headerField value="[string]"/><!-- 0..1 HTTP header field name -->
    <minimumId value="[string]"/><!-- 0..1 Fixture Id of minimum content resource -->
    <navigationLinks value="[boolean]"/><!-- 0..1 Perform validation on navigation links? -->
    <operator value="[code]"/><!-- 0..1 equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval -->
    <path value="[string]"/><!-- 0..1 XPath or JSONPath expression -->
    <requestMethod value="[code]"/><!-- 0..1 delete | get | options | patch | post | put | head -->
    <requestURL value="[string]"/><!-- 0..1 Request URL comparison value -->
    <resource value="[code]"/><!-- 0..1 Resource type -->
    <response value="[code]"/><!-- 0..1 okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable -->
    <responseCode value="[string]"/><!-- 0..1 HTTP response code to test -->
    <sourceId value="[id]"/><!-- 0..1 Fixture Id of source expression or headerField -->
    <validateProfileId value="[id]"/><!-- 0..1 Profile Id of validation profile reference -->
    <value value="[string]"/><!-- 0..1 The value to compare to -->
    <warningOnly value="[boolean]"/><!-- 1..1 Will this assert produce a warning only on error? -->
   </assert>
  </action>
 </setup>
 <test>  <!-- 0..* A test in this script -->
  <name value="[string]"/><!-- 0..1 Tracking/logging name of this test -->
  <description value="[string]"/><!-- 0..1 Tracking/reporting short description of the test -->
  <action>  <!-- 1..* A test operation or assert to perform -->
   <operation><!-- 0..1 Content as for TestScript.setup.action.operation The setup operation to perform --></operation>
   <assert><!-- 0..1 Content as for TestScript.setup.action.assert The setup assertion to perform --></assert>
  </action>
 </test>
 <teardown>  <!-- 0..1 A series of required clean up steps -->
  <action>  <!-- 1..* One or more teardown operations to perform -->
   <operation><!-- 1..1 Content as for TestScript.setup.action.operation The teardown operation to perform --></operation>
  </action>
 </teardown>
</TestScript>

JSON Template

{doco
  "resourceType" : "TestScript",
  // from Resource: id, meta, implicitRules, and language
  // from DomainResource: text, contained, extension, and modifierExtension
  "url" : "<uri>", // R!  Canonical identifier for this test script, represented as a URI (globally unique)
  "identifier" : { Identifier }, // Additional identifier for the test script
  "version" : "<string>", // Business version of the test script
  "name" : "<string>", // R!  Name for this test script (computer friendly)
  "title" : "<string>", // Name for this test script (human friendly)
  "status" : "<code>", // R!  draft | active | retired | unknown
  "experimental" : <boolean>, // For testing purposes, not real usage
  "date" : "<dateTime>", // Date last changed
  "publisher" : "<string>", // Name of the publisher (organization or individual)
  "contact" : [{ ContactDetail }], // Contact details for the publisher
  "description" : "<markdown>", // Natural language description of the test script
  "useContext" : [{ UsageContext }], // The context that the content is intended to support
  "jurisdiction" : [{ CodeableConcept }], // Intended jurisdiction for test script (if applicable)
  "purpose" : "<markdown>", // Why this test script is defined
  "copyright" : "<markdown>", // Use and/or publishing restrictions
  "origin" : [{ // An abstract server representing a client or sender in a message exchange
    "index" : <integer>, // R!  The index of the abstract origin server starting at 1
    "profile" : { Coding } // R!  FHIR-Client | FHIR-SDC-FormFiller
  }],
  "destination" : [{ // An abstract server representing a destination or receiver in a message exchange
    "index" : <integer>, // R!  The index of the abstract destination server starting at 1
    "profile" : { Coding } // R!  FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
  }],
  "metadata" : { // Required capability that is assumed to function correctly on the FHIR server being tested
    "link" : [{ // Links to the FHIR specification
      "url" : "<uri>", // R!  URL to the specification
      "description" : "<string>" // Short description
    }],
    "capability" : [{ // R!  Capabilities  that are assumed to function correctly on the FHIR server being tested
      "required" : <boolean>, // R!  Are the capabilities required?
      "validated" : <boolean>, // R!  Are the capabilities validated?
      "description" : "<string>", // The expected capabilities of the server
      "origin" : [<integer>], // Which origin server these requirements apply to
      "destination" : <integer>, // Which server these requirements apply to
      "link" : ["<uri>"], // Links to the FHIR specification
      "capabilities" : { canonical(CapabilityStatement) } // R!  Required Capability Statement
    }]
  },
  "fixture" : [{ // Fixture in the test script - by reference (uri)
    "autocreate" : <boolean>, // R!  Whether or not to implicitly create the fixture during setup
    "autodelete" : <boolean>, // R!  Whether or not to implicitly delete the fixture during teardown
    "resource" : { Reference(Any) } // Reference of the resource
  }],
  "profile" : [{ Reference(Any) }], // Reference of the validation profile
  "variable" : [{ // Placeholder for evaluated elements
    "name" : "<string>", // R!  Descriptive name for this variable
    "defaultValue" : "<string>", // Default, hard-coded, or user-defined value for this variable
    "description" : "<string>", // Natural language description of the variable
    "expression" : "<string>", // The FHIRPath expression against the fixture body
    "headerField" : "<string>", // HTTP header field name for source
    "hint" : "<string>", // Hint help text for default value to enter
    "path" : "<string>", // XPath or JSONPath against the fixture body
    "sourceId" : "<id>" // Fixture Id of source expression or headerField within this variable
  }],
  "setup" : { // A series of required setup operations before tests are executed
    "action" : [{ // R!  A setup operation or assert to perform
      "operation" : { // The setup operation to perform
        "type" : { Coding }, // The operation code type that will be executed
        "resource" : "<code>", // Resource type
        "label" : "<string>", // Tracking/logging operation label
        "description" : "<string>", // Tracking/reporting operation description
        "accept" : "<code>", // Mime type to accept in the payload of the response, with charset etc.
        "contentType" : "<code>", // Mime type of the request payload contents, with charset etc.
        "destination" : <integer>, // Server responding to the request
        "encodeRequestUrl" : <boolean>, // R!  Whether or not to send the request url in encoded format
        "method" : "<code>", // delete | get | options | patch | post | put | head
        "origin" : <integer>, // Server initiating the request
        "params" : "<string>", // Explicitly defined path parameters
        "requestHeader" : [{ // Each operation can have one or more header elements
          "field" : "<string>", // R!  HTTP header field name
          "value" : "<string>" // R!  HTTP headerfield value
        }],
        "requestId" : "<id>", // Fixture Id of mapped request
        "responseId" : "<id>", // Fixture Id of mapped response
        "sourceId" : "<id>", // Fixture Id of body for PUT and POST requests
        "targetId" : "<id>", // Id of fixture used for extracting the [id],  [type], and [vid] for GET requests
        "url" : "<string>" // Request URL
      },
      "assert" : { // The assertion to perform
        "label" : "<string>", // Tracking/logging assertion label
        "description" : "<string>", // Tracking/reporting assertion description
        "direction" : "<code>", // response | request
        "compareToSourceId" : "<string>", // Id of the source fixture to be evaluated
        "compareToSourceExpression" : "<string>", // The FHIRPath expression to evaluate against the source fixture
        "compareToSourcePath" : "<string>", // XPath or JSONPath expression to evaluate against the source fixture
        "contentType" : "<code>", // Mime type to compare against the 'Content-Type' header
        "expression" : "<string>", // The FHIRPath expression to be evaluated
        "headerField" : "<string>", // HTTP header field name
        "minimumId" : "<string>", // Fixture Id of minimum content resource
        "navigationLinks" : <boolean>, // Perform validation on navigation links?
        "operator" : "<code>", // equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
        "path" : "<string>", // XPath or JSONPath expression
        "requestMethod" : "<code>", // delete | get | options | patch | post | put | head
        "requestURL" : "<string>", // Request URL comparison value
        "resource" : "<code>", // Resource type
        "response" : "<code>", // okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
        "responseCode" : "<string>", // HTTP response code to test
        "sourceId" : "<id>", // Fixture Id of source expression or headerField
        "validateProfileId" : "<id>", // Profile Id of validation profile reference
        "value" : "<string>", // The value to compare to
        "warningOnly" : <boolean> // R!  Will this assert produce a warning only on error?
      }
    }]
  },
  "test" : [{ // A test in this script
    "name" : "<string>", // Tracking/logging name of this test
    "description" : "<string>", // Tracking/reporting short description of the test
    "action" : [{ // R!  A test operation or assert to perform
      "operation" : { Content as for TestScript.setup.action.operation }, // The setup operation to perform
      "assert" : { Content as for TestScript.setup.action.assert } // The setup assertion to perform
    }]
  }],
  "teardown" : { // A series of required clean up steps
    "action" : [{ // R!  One or more teardown operations to perform
      "operation" : { Content as for TestScript.setup.action.operation } // R!  The teardown operation to perform
    }]
  }
}

Turtle Template

@prefix fhir: <http://hl7.org/fhir/> .doco


[ a fhir:TestScript;
  fhir:nodeRole fhir:treeRoot; # if this is the parser root

  # from Resource: .id, .meta, .implicitRules, and .language
  # from DomainResource: .text, .contained, .extension, and .modifierExtension
  fhir:TestScript.url [ uri ]; # 1..1 Canonical identifier for this test script, represented as a URI (globally unique)
  fhir:TestScript.identifier [ Identifier ]; # 0..1 Additional identifier for the test script
  fhir:TestScript.version [ string ]; # 0..1 Business version of the test script
  fhir:TestScript.name [ string ]; # 1..1 Name for this test script (computer friendly)
  fhir:TestScript.title [ string ]; # 0..1 Name for this test script (human friendly)
  fhir:TestScript.status [ code ]; # 1..1 draft | active | retired | unknown
  fhir:TestScript.experimental [ boolean ]; # 0..1 For testing purposes, not real usage
  fhir:TestScript.date [ dateTime ]; # 0..1 Date last changed
  fhir:TestScript.publisher [ string ]; # 0..1 Name of the publisher (organization or individual)
  fhir:TestScript.contact [ ContactDetail ], ... ; # 0..* Contact details for the publisher
  fhir:TestScript.description [ markdown ]; # 0..1 Natural language description of the test script
  fhir:TestScript.useContext [ UsageContext ], ... ; # 0..* The context that the content is intended to support
  fhir:TestScript.jurisdiction [ CodeableConcept ], ... ; # 0..* Intended jurisdiction for test script (if applicable)
  fhir:TestScript.purpose [ markdown ]; # 0..1 Why this test script is defined
  fhir:TestScript.copyright [ markdown ]; # 0..1 Use and/or publishing restrictions
  fhir:TestScript.origin [ # 0..* An abstract server representing a client or sender in a message exchange
    fhir:TestScript.origin.index [ integer ]; # 1..1 The index of the abstract origin server starting at 1
    fhir:TestScript.origin.profile [ Coding ]; # 1..1 FHIR-Client | FHIR-SDC-FormFiller
  ], ...;
  fhir:TestScript.destination [ # 0..* An abstract server representing a destination or receiver in a message exchange
    fhir:TestScript.destination.index [ integer ]; # 1..1 The index of the abstract destination server starting at 1
    fhir:TestScript.destination.profile [ Coding ]; # 1..1 FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
  ], ...;
  fhir:TestScript.metadata [ # 0..1 Required capability that is assumed to function correctly on the FHIR server being tested
    fhir:TestScript.metadata.link [ # 0..* Links to the FHIR specification
      fhir:TestScript.metadata.link.url [ uri ]; # 1..1 URL to the specification
      fhir:TestScript.metadata.link.description [ string ]; # 0..1 Short description
    ], ...;
    fhir:TestScript.metadata.capability [ # 1..* Capabilities  that are assumed to function correctly on the FHIR server being tested
      fhir:TestScript.metadata.capability.required [ boolean ]; # 1..1 Are the capabilities required?
      fhir:TestScript.metadata.capability.validated [ boolean ]; # 1..1 Are the capabilities validated?
      fhir:TestScript.metadata.capability.description [ string ]; # 0..1 The expected capabilities of the server
      fhir:TestScript.metadata.capability.origin [ integer ], ... ; # 0..* Which origin server these requirements apply to
      fhir:TestScript.metadata.capability.destination [ integer ]; # 0..1 Which server these requirements apply to
      fhir:TestScript.metadata.capability.link [ uri ], ... ; # 0..* Links to the FHIR specification
      fhir:TestScript.metadata.capability.capabilities [ canonical(CapabilityStatement) ]; # 1..1 Required Capability Statement
    ], ...;
  ];
  fhir:TestScript.fixture [ # 0..* Fixture in the test script - by reference (uri)
    fhir:TestScript.fixture.autocreate [ boolean ]; # 1..1 Whether or not to implicitly create the fixture during setup
    fhir:TestScript.fixture.autodelete [ boolean ]; # 1..1 Whether or not to implicitly delete the fixture during teardown
    fhir:TestScript.fixture.resource [ Reference(Any) ]; # 0..1 Reference of the resource
  ], ...;
  fhir:TestScript.profile [ Reference(Any) ], ... ; # 0..* Reference of the validation profile
  fhir:TestScript.variable [ # 0..* Placeholder for evaluated elements
    fhir:TestScript.variable.name [ string ]; # 1..1 Descriptive name for this variable
    fhir:TestScript.variable.defaultValue [ string ]; # 0..1 Default, hard-coded, or user-defined value for this variable
    fhir:TestScript.variable.description [ string ]; # 0..1 Natural language description of the variable
    fhir:TestScript.variable.expression [ string ]; # 0..1 The FHIRPath expression against the fixture body
    fhir:TestScript.variable.headerField [ string ]; # 0..1 HTTP header field name for source
    fhir:TestScript.variable.hint [ string ]; # 0..1 Hint help text for default value to enter
    fhir:TestScript.variable.path [ string ]; # 0..1 XPath or JSONPath against the fixture body
    fhir:TestScript.variable.sourceId [ id ]; # 0..1 Fixture Id of source expression or headerField within this variable
  ], ...;
  fhir:TestScript.setup [ # 0..1 A series of required setup operations before tests are executed
    fhir:TestScript.setup.action [ # 1..* A setup operation or assert to perform
      fhir:TestScript.setup.action.operation [ # 0..1 The setup operation to perform
        fhir:TestScript.setup.action.operation.type [ Coding ]; # 0..1 The operation code type that will be executed
        fhir:TestScript.setup.action.operation.resource [ code ]; # 0..1 Resource type
        fhir:TestScript.setup.action.operation.label [ string ]; # 0..1 Tracking/logging operation label
        fhir:TestScript.setup.action.operation.description [ string ]; # 0..1 Tracking/reporting operation description
        fhir:TestScript.setup.action.operation.accept [ code ]; # 0..1 Mime type to accept in the payload of the response, with charset etc.
        fhir:TestScript.setup.action.operation.contentType [ code ]; # 0..1 Mime type of the request payload contents, with charset etc.
        fhir:TestScript.setup.action.operation.destination [ integer ]; # 0..1 Server responding to the request
        fhir:TestScript.setup.action.operation.encodeRequestUrl [ boolean ]; # 1..1 Whether or not to send the request url in encoded format
        fhir:TestScript.setup.action.operation.method [ code ]; # 0..1 delete | get | options | patch | post | put | head
        fhir:TestScript.setup.action.operation.origin [ integer ]; # 0..1 Server initiating the request
        fhir:TestScript.setup.action.operation.params [ string ]; # 0..1 Explicitly defined path parameters
        fhir:TestScript.setup.action.operation.requestHeader [ # 0..* Each operation can have one or more header elements
          fhir:TestScript.setup.action.operation.requestHeader.field [ string ]; # 1..1 HTTP header field name
          fhir:TestScript.setup.action.operation.requestHeader.value [ string ]; # 1..1 HTTP headerfield value
        ], ...;
        fhir:TestScript.setup.action.operation.requestId [ id ]; # 0..1 Fixture Id of mapped request
        fhir:TestScript.setup.action.operation.responseId [ id ]; # 0..1 Fixture Id of mapped response
        fhir:TestScript.setup.action.operation.sourceId [ id ]; # 0..1 Fixture Id of body for PUT and POST requests
        fhir:TestScript.setup.action.operation.targetId [ id ]; # 0..1 Id of fixture used for extracting the [id],  [type], and [vid] for GET requests
        fhir:TestScript.setup.action.operation.url [ string ]; # 0..1 Request URL
      ];
      fhir:TestScript.setup.action.assert [ # 0..1 The assertion to perform
        fhir:TestScript.setup.action.assert.label [ string ]; # 0..1 Tracking/logging assertion label
        fhir:TestScript.setup.action.assert.description [ string ]; # 0..1 Tracking/reporting assertion description
        fhir:TestScript.setup.action.assert.direction [ code ]; # 0..1 response | request
        fhir:TestScript.setup.action.assert.compareToSourceId [ string ]; # 0..1 Id of the source fixture to be evaluated
        fhir:TestScript.setup.action.assert.compareToSourceExpression [ string ]; # 0..1 The FHIRPath expression to evaluate against the source fixture
        fhir:TestScript.setup.action.assert.compareToSourcePath [ string ]; # 0..1 XPath or JSONPath expression to evaluate against the source fixture
        fhir:TestScript.setup.action.assert.contentType [ code ]; # 0..1 Mime type to compare against the 'Content-Type' header
        fhir:TestScript.setup.action.assert.expression [ string ]; # 0..1 The FHIRPath expression to be evaluated
        fhir:TestScript.setup.action.assert.headerField [ string ]; # 0..1 HTTP header field name
        fhir:TestScript.setup.action.assert.minimumId [ string ]; # 0..1 Fixture Id of minimum content resource
        fhir:TestScript.setup.action.assert.navigationLinks [ boolean ]; # 0..1 Perform validation on navigation links?
        fhir:TestScript.setup.action.assert.operator [ code ]; # 0..1 equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
        fhir:TestScript.setup.action.assert.path [ string ]; # 0..1 XPath or JSONPath expression
        fhir:TestScript.setup.action.assert.requestMethod [ code ]; # 0..1 delete | get | options | patch | post | put | head
        fhir:TestScript.setup.action.assert.requestURL [ string ]; # 0..1 Request URL comparison value
        fhir:TestScript.setup.action.assert.resource [ code ]; # 0..1 Resource type
        fhir:TestScript.setup.action.assert.response [ code ]; # 0..1 okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
        fhir:TestScript.setup.action.assert.responseCode [ string ]; # 0..1 HTTP response code to test
        fhir:TestScript.setup.action.assert.sourceId [ id ]; # 0..1 Fixture Id of source expression or headerField
        fhir:TestScript.setup.action.assert.validateProfileId [ id ]; # 0..1 Profile Id of validation profile reference
        fhir:TestScript.setup.action.assert.value [ string ]; # 0..1 The value to compare to
        fhir:TestScript.setup.action.assert.warningOnly [ boolean ]; # 1..1 Will this assert produce a warning only on error?
      ];
    ], ...;
  ];
  fhir:TestScript.test [ # 0..* A test in this script
    fhir:TestScript.test.name [ string ]; # 0..1 Tracking/logging name of this test
    fhir:TestScript.test.description [ string ]; # 0..1 Tracking/reporting short description of the test
    fhir:TestScript.test.action [ # 1..* A test operation or assert to perform
      fhir:TestScript.test.action.operation [ See TestScript.setup.action.operation ]; # 0..1 The setup operation to perform
      fhir:TestScript.test.action.assert [ See TestScript.setup.action.assert ]; # 0..1 The setup assertion to perform
    ], ...;
  ], ...;
  fhir:TestScript.teardown [ # 0..1 A series of required clean up steps
    fhir:TestScript.teardown.action [ # 1..* One or more teardown operations to perform
      fhir:TestScript.teardown.action.operation [ See TestScript.setup.action.operation ]; # 1..1 The teardown operation to perform
    ], ...;
  ];
]

Changes since R4

TestScript
  • No Changes

See the Full Difference for further information

This analysis is available as XML or JSON.

Conversions between R3 and R4

See R3 <--> R4 Conversion Maps (status = 7 tests that all execute ok. 1 fail round-trip testing and 7 r3 resources are invalid (0 errors).)

Structure

NameFlagsCard.TypeDescription & Constraintsdoco
.. TestScript TUDomainResourceDescribes a set of tests
+ Warning: Name should be usable as an identifier for the module by machine processing applications such as code generation
Elements defined in Ancestors: id, meta, implicitRules, language, text, contained, extension, modifierExtension
... url Σ1..1uriCanonical identifier for this test script, represented as a URI (globally unique)
... identifier Σ0..1IdentifierAdditional identifier for the test script
... version Σ0..1stringBusiness version of the test script
... title Σ0..1stringName for this test script (human friendly)
... status ?!Σ1..1codedraft | active | retired | unknown
PublicationStatus (Required)
... experimental Σ0..1booleanFor testing purposes, not real usage
... date Σ0..1dateTimeDate last changed
... publisher Σ0..1stringName of the publisher (organization or individual)
... contact Σ0..*ContactDetailContact details for the publisher
... description 0..1markdownNatural language description of the test script
... useContext Σ0..*UsageContextThe context that the content is intended to support
... jurisdiction Σ0..*CodeableConceptIntended jurisdiction for test script (if applicable)
Jurisdiction (Extensible)
... purpose 0..1markdownWhy this test script is defined
... copyright 0..1markdownUse and/or publishing restrictions
... origin 0..*BackboneElementAn abstract server representing a client or sender in a message exchange
.... index 1..1integerThe index of the abstract origin server starting at 1
.... profile 1..1CodingFHIR-Client | FHIR-SDC-FormFiller
TestScriptProfileOriginType (Extensible)
... destination 0..*BackboneElementAn abstract server representing a destination or receiver in a message exchange
.... index 1..1integerThe index of the abstract destination server starting at 1
.... profile 1..1CodingFHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
TestScriptProfileDestinationType (Extensible)
... metadata I0..1BackboneElementRequired capability that is assumed to function correctly on the FHIR server being tested
+ Rule: TestScript metadata capability SHALL contain required or validated or both.
.... link 0..*BackboneElementLinks to the FHIR specification
..... url 1..1uriURL to the specification
..... description 0..1stringShort description
.... capability 1..*BackboneElementCapabilities that are assumed to function correctly on the FHIR server being tested
..... required 1..1booleanAre the capabilities required?
..... validated 1..1booleanAre the capabilities validated?
..... description 0..1stringThe expected capabilities of the server
..... origin 0..*integerWhich origin server these requirements apply to
..... destination 0..1integerWhich server these requirements apply to
..... link 0..*uriLinks to the FHIR specification
..... capabilities 1..1canonical(CapabilityStatement)Required Capability Statement
... fixture 0..*BackboneElementFixture in the test script - by reference (uri)
.... autocreate 1..1booleanWhether or not to implicitly create the fixture during setup
.... autodelete 1..1booleanWhether or not to implicitly delete the fixture during teardown
.... resource 0..1Reference(Any)Reference of the resource
... profile 0..*Reference(Any)Reference of the validation profile
... variable I0..*BackboneElementPlaceholder for evaluated elements
+ Rule: Variable can only contain one of expression, headerField or path.
.... name 1..1stringDescriptive name for this variable
.... defaultValue 0..1stringDefault, hard-coded, or user-defined value for this variable
.... description 0..1stringNatural language description of the variable
.... expression 0..1stringThe FHIRPath expression against the fixture body
.... headerField 0..1stringHTTP header field name for source
.... hint 0..1stringHint help text for default value to enter
.... path 0..1stringXPath or JSONPath against the fixture body
.... sourceId 0..1idFixture Id of source expression or headerField within this variable
... setup 0..1BackboneElementA series of required setup operations before tests are executed
.... action I1..*BackboneElementA setup operation or assert to perform
+ Rule: Setup action SHALL contain either an operation or assert but not both.
..... operation I0..1BackboneElementThe setup operation to perform
+ Rule: Setup operation SHALL contain either sourceId or targetId or params or url.
...... type 0..1CodingThe operation code type that will be executed
TestScriptOperationCode (Extensible)
...... resource 0..1codeResource type
FHIRDefinedType (Required)
...... label 0..1stringTracking/logging operation label
...... description 0..1stringTracking/reporting operation description
...... accept 0..1codeMime type to accept in the payload of the response, with charset etc.
MimeType (Required)
...... contentType 0..1codeMime type of the request payload contents, with charset etc.
MimeType (Required)
...... destination 0..1integerServer responding to the request
...... encodeRequestUrl 1..1booleanWhether or not to send the request url in encoded format
...... method 0..1codedelete | get | options | patch | post | put | head
TestScriptRequestMethodCode (Required)
...... origin 0..1integerServer initiating the request
...... params 0..1stringExplicitly defined path parameters
...... requestHeader 0..*BackboneElementEach operation can have one or more header elements
....... field 1..1stringHTTP header field name
....... value 1..1stringHTTP headerfield value
...... requestId 0..1idFixture Id of mapped request
...... responseId 0..1idFixture Id of mapped response
...... sourceId 0..1idFixture Id of body for PUT and POST requests
...... targetId 0..1idId of fixture used for extracting the [id], [type], and [vid] for GET requests
...... url 0..1stringRequest URL
..... assert I0..1BackboneElementThe assertion to perform
+ Rule: Only a single assertion SHALL be present within setup action assert element.
+ Rule: Setup action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.
+ Rule: Setup action assert response and responseCode SHALL be empty when direction equals request
...... label 0..1stringTracking/logging assertion label
...... description 0..1stringTracking/reporting assertion description
...... direction 0..1coderesponse | request
AssertionDirectionType (Required)
...... compareToSourceId 0..1stringId of the source fixture to be evaluated
...... compareToSourceExpression 0..1stringThe FHIRPath expression to evaluate against the source fixture
...... compareToSourcePath 0..1stringXPath or JSONPath expression to evaluate against the source fixture
...... contentType 0..1codeMime type to compare against the 'Content-Type' header
MimeType (Required)
...... expression 0..1stringThe FHIRPath expression to be evaluated
...... headerField 0..1stringHTTP header field name
...... minimumId 0..1stringFixture Id of minimum content resource
...... navigationLinks 0..1booleanPerform validation on navigation links?
...... operator 0..1codeequals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
AssertionOperatorType (Required)
...... path 0..1stringXPath or JSONPath expression
...... requestMethod 0..1codedelete | get | options | patch | post | put | head
TestScriptRequestMethodCode (Required)
...... requestURL 0..1stringRequest URL comparison value
...... resource 0..1codeResource type
FHIRDefinedType (Required)
...... response 0..1codeokay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
AssertionResponseTypes (Required)
...... responseCode 0..1stringHTTP response code to test
...... sourceId 0..1idFixture Id of source expression or headerField
...... validateProfileId 0..1idProfile Id of validation profile reference
...... value 0..1stringThe value to compare to
...... warningOnly 1..1booleanWill this assert produce a warning only on error?
... test 0..*BackboneElementA test in this script
.... name 0..1stringTracking/logging name of this test
.... description 0..1stringTracking/reporting short description of the test
.... action I1..*BackboneElementA test operation or assert to perform
+ Rule: Test action SHALL contain either an operation or assert but not both.
..... operation I0..1see operationThe setup operation to perform
+ Rule: Test operation SHALL contain either sourceId or targetId or params or url.
..... assert I0..1see assertThe setup assertion to perform
+ Rule: Only a single assertion SHALL be present within test action assert element.
+ Rule: Test action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.
+ Rule: Test action assert response and response and responseCode SHALL be empty when direction equals request
... teardown 0..1BackboneElementA series of required clean up steps
.... action 1..*BackboneElementOne or more teardown operations to perform
..... operation I1..1see operationThe teardown operation to perform
+ Rule: Teardown operation SHALL contain either sourceId or targetId or params or url.

doco Documentation for this format

UML Diagram (Legend)

TestScript (DomainResource)An absolute URI that is used to identify this test script when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this test script is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the test script is stored on different serversurl : uri [1..1]A formal identifier that is used to identify this test script when it is represented in other formats, or referenced in a specification, model, design or an instanceidentifier : Identifier [0..1]The identifier that is used to identify this version of the test script when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the test script author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequenceversion : string [0..1]A natural language name identifying the test script. This name should be usable as an identifier for the module by machine processing applications such as code generationname : string [1..1]A short, descriptive, user-friendly title for the test scripttitle : string [0..1]The status of this test script. Enables tracking the life-cycle of the content (this element modifies the meaning of other elements)status : code [1..1] « null (Strength=Required)PublicationStatus! »A Boolean value to indicate that this test script is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usageexperimental : boolean [0..1]The date (and optionally time) when the test script was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the test script changesdate : dateTime [0..1]The name of the organization or individual that published the test scriptpublisher : string [0..1]Contact details to assist a user in finding and communicating with the publishercontact : ContactDetail [0..*]A free text natural language description of the test script from a consumer's perspectivedescription : markdown [0..1]The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate test script instancesuseContext : UsageContext [0..*]A legal or geographic region in which the test script is intended to be usedjurisdiction : CodeableConcept [0..*] « null (Strength=Extensible)Jurisdiction ValueSet+ »Explanation of why this test script is needed and why it has been designed as it haspurpose : markdown [0..1]A copyright statement relating to the test script and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the test scriptcopyright : markdown [0..1]Reference to the profile to be used for validationprofile : Reference [0..*] « Any »OriginAbstract name given to an origin server in this test script. The name is provided as a number starting at 1index : integer [1..1]The type of origin profile the test system supportsprofile : Coding [1..1] « null (Strength=Extensible)TestScriptProfileOriginType+ »DestinationAbstract name given to a destination server in this test script. The name is provided as a number starting at 1index : integer [1..1]The type of destination profile the test system supportsprofile : Coding [1..1] « null (Strength=Extensible)TestScriptProfileDestinationT...+ »MetadataLinkURL to a particular requirement or feature within the FHIR specificationurl : uri [1..1]Short description of the linkdescription : string [0..1]CapabilityWhether or not the test execution will require the given capabilities of the server in order for this test script to executerequired : boolean [1..1]Whether or not the test execution will validate the given capabilities of the server in order for this test script to executevalidated : boolean [1..1]Description of the capabilities that this test script is requiring the server to supportdescription : string [0..1]Which origin server these requirements apply toorigin : integer [0..*]Which server these requirements apply todestination : integer [0..1]Links to the FHIR specification that describes this interaction and the resources involved in more detaillink : uri [0..*]Minimum capabilities required of server for test script to execute successfully. If server does not meet at a minimum the referenced capability statement, then all tests in this script are skippedcapabilities : canonical [1..1] « CapabilityStatement »FixtureWhether or not to implicitly create the fixture during setup. If true, the fixture is automatically created on each server being tested during setup, therefore no create operation is required for this fixture in the TestScript.setup sectionautocreate : boolean [1..1]Whether or not to implicitly delete the fixture during teardown. If true, the fixture is automatically deleted on each server being tested during teardown, therefore no delete operation is required for this fixture in the TestScript.teardown sectionautodelete : boolean [1..1]Reference to the resource (containing the contents of the resource needed for operations)resource : Reference [0..1] « Any »VariableDescriptive name for this variablename : string [1..1]A default, hard-coded, or user-defined value for this variabledefaultValue : string [0..1]A free text natural language description of the variable and its purposedescription : string [0..1]The FHIRPath expression to evaluate against the fixture body. When variables are defined, only one of either expression, headerField or path must be specifiedexpression : string [0..1]Will be used to grab the HTTP header field value from the headers that sourceId is pointing toheaderField : string [0..1]Displayable text string with hint help information to the user when entering a default valuehint : string [0..1]XPath or JSONPath to evaluate against the fixture body. When variables are defined, only one of either expression, headerField or path must be specifiedpath : string [0..1]Fixture to evaluate the XPath/JSONPath expression or the headerField against within this variablesourceId : id [0..1]SetupSetupActionOperationServer interaction or operation typetype : Coding [0..1] « null (Strength=Extensible)TestScriptOperationCode+ »The type of the resource. See http://build.fhir.org/resourcelist.htmlresource : code [0..1] « null (Strength=Required)FHIRDefinedType! »The label would be used for tracking/logging purposes by test engineslabel : string [0..1]The description would be used by test engines for tracking and reporting purposesdescription : string [0..1]The mime-type to use for RESTful operation in the 'Accept' headeraccept : code [0..1] « null (Strength=Required)Mime Types! »The mime-type to use for RESTful operation in the 'Content-Type' headercontentType : code [0..1] « null (Strength=Required)Mime Types! »The server where the request message is destined for. Must be one of the server numbers listed in TestScript.destination sectiondestination : integer [0..1]Whether or not to implicitly send the request url in encoded format. The default is true to match the standard RESTful client behavior. Set to false when communicating with a server that does not support encoded url pathsencodeRequestUrl : boolean [1..1]The HTTP method the test engine MUST use for this operation regardless of any other operation detailsmethod : code [0..1] « null (Strength=Required)TestScriptRequestMethodCode! »The server where the request message originates from. Must be one of the server numbers listed in TestScript.origin sectionorigin : integer [0..1]Path plus parameters after [type]. Used to set parts of the request URL explicitlyparams : string [0..1]The fixture id (maybe new) to map to the requestrequestId : id [0..1]The fixture id (maybe new) to map to the responseresponseId : id [0..1]The id of the fixture used as the body of a PUT or POST requestsourceId : id [0..1]Id of fixture used for extracting the [id], [type], and [vid] for GET requeststargetId : id [0..1]Complete request URLurl : string [0..1]RequestHeaderThe HTTP header field e.g. "Accept"field : string [1..1]The value of the header e.g. "application/fhir+xml"value : string [1..1]AssertThe label would be used for tracking/logging purposes by test engineslabel : string [0..1]The description would be used by test engines for tracking and reporting purposesdescription : string [0..1]The direction to use for the assertiondirection : code [0..1] « null (Strength=Required)AssertionDirectionType! »Id of the source fixture used as the contents to be evaluated by either the "source/expression" or "sourceId/path" definitioncompareToSourceId : string [0..1]The FHIRPath expression to evaluate against the source fixture. When compareToSourceId is defined, either compareToSourceExpression or compareToSourcePath must be defined, but not bothcompareToSourceExpression : string [0..1]XPath or JSONPath expression to evaluate against the source fixture. When compareToSourceId is defined, either compareToSourceExpression or compareToSourcePath must be defined, but not bothcompareToSourcePath : string [0..1]The mime-type contents to compare against the request or response message 'Content-Type' headercontentType : code [0..1] « null (Strength=Required)Mime Types! »The FHIRPath expression to be evaluated against the request or response message contents - HTTP headers and payloadexpression : string [0..1]The HTTP header field name e.g. 'Location'headerField : string [0..1]The ID of a fixture. Asserts that the response contains at a minimum the fixture specified by minimumIdminimumId : string [0..1]Whether or not the test execution performs validation on the bundle navigation linksnavigationLinks : boolean [0..1]The operator type defines the conditional behavior of the assert. If not defined, the default is equalsoperator : code [0..1] « null (Strength=Required)AssertionOperatorType! »The XPath or JSONPath expression to be evaluated against the fixture representing the response received from serverpath : string [0..1]The request method or HTTP operation code to compare against that used by the client system under testrequestMethod : code [0..1] « null (Strength=Required)TestScriptRequestMethodCode! »The value to use in a comparison against the request URL path stringrequestURL : string [0..1]The type of the resource. See http://build.fhir.org/resourcelist.htmlresource : code [0..1] « null (Strength=Required)FHIRDefinedType! »okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessableresponse : code [0..1] « null (Strength=Required)AssertionResponseTypes! »The value of the HTTP response code to be testedresponseCode : string [0..1]Fixture to evaluate the XPath/JSONPath expression or the headerField againstsourceId : id [0..1]The ID of the Profile to validate againstvalidateProfileId : id [0..1]The value to compare tovalue : string [0..1]Whether or not the test execution will produce a warning only on error for this assertwarningOnly : boolean [1..1]TestThe name of this test used for tracking/logging purposes by test enginesname : string [0..1]A short description of the test used by test engines for tracking and reporting purposesdescription : string [0..1]TestActionTeardownTeardownActionAn abstract server used in operations within this test script in the origin elementorigin[0..*]An abstract server used in operations within this test script in the destination elementdestination[0..*]A link to the FHIR specification that this test is coveringlink[0..*]Capabilities that must exist and are assumed to function correctly on the FHIR server being testedcapability[1..*]The required capability must exist and are assumed to function correctly on the FHIR server being testedmetadata[0..1]Fixture in the test script - by reference (uri). All fixtures are required for the test script to executefixture[0..*]Variable is set based either on element value in response body or on header field value in the response headersvariable[0..*]Header elements would be used to set HTTP headersrequestHeader[0..*]The operation to performoperation[0..1]Evaluates the results of previous operations to determine if the server under test behaves appropriatelyassert[0..1]Action would contain either an operation or an assertionaction[1..*]A series of required setup operations before tests are executedsetup[0..1]An operation would involve a REST request to a serveroperation[0..1]Evaluates the results of previous operations to determine if the server under test behaves appropriatelyassert[0..1]Action would contain either an operation or an assertionaction[1..*]A test in this scripttest[0..*]An operation would involve a REST request to a serveroperation[1..1]The teardown action will only contain an operationaction[1..*]A series of operations required to clean up after all the tests are executed (successfully or otherwise)teardown[0..1]

XML Template

<TestScript xmlns="http://hl7.org/fhir"> doco
 <!-- from Resource: id, meta, implicitRules, and language -->
 <!-- from DomainResource: text, contained, extension, and modifierExtension -->
 <url value="[uri]"/><!-- 1..1 Canonical identifier for this test script, represented as a URI (globally unique) -->
 <identifier><!-- 0..1 Identifier Additional identifier for the test script --></identifier>
 <version value="[string]"/><!-- 0..1 Business version of the test script -->
 <name value="[string]"/><!-- 1..1 Name for this test script (computer friendly) -->
 <title value="[string]"/><!-- 0..1 Name for this test script (human friendly) -->
 <status value="[code]"/><!-- 1..1 draft | active | retired | unknown -->
 <experimental value="[boolean]"/><!-- 0..1 For testing purposes, not real usage -->
 <date value="[dateTime]"/><!-- 0..1 Date last changed -->
 <publisher value="[string]"/><!-- 0..1 Name of the publisher (organization or individual) -->
 <contact><!-- 0..* ContactDetail Contact details for the publisher --></contact>
 <description value="[markdown]"/><!-- 0..1 Natural language description of the test script -->
 <useContext><!-- 0..* UsageContext The context that the content is intended to support --></useContext>
 <jurisdiction><!-- 0..* CodeableConcept Intended jurisdiction for test script (if applicable) --></jurisdiction>
 <purpose value="[markdown]"/><!-- 0..1 Why this test script is defined -->
 <copyright value="[markdown]"/><!-- 0..1 Use and/or publishing restrictions -->
 <origin>  <!-- 0..* An abstract server representing a client or sender in a message exchange -->
  <index value="[integer]"/><!-- 1..1 The index of the abstract origin server starting at 1 -->
  <profile><!-- 1..1 Coding FHIR-Client | FHIR-SDC-FormFiller --></profile>
 </origin>
 <destination>  <!-- 0..* An abstract server representing a destination or receiver in a message exchange -->
  <index value="[integer]"/><!-- 1..1 The index of the abstract destination server starting at 1 -->
  <profile><!-- 1..1 Coding FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor --></profile>
 </destination>
 <metadata>  <!-- 0..1 Required capability that is assumed to function correctly on the FHIR server being tested -->
  <link>  <!-- 0..* Links to the FHIR specification -->
   <url value="[uri]"/><!-- 1..1 URL to the specification -->
   <description value="[string]"/><!-- 0..1 Short description -->
  </link>
  <capability>  <!-- 1..* Capabilities  that are assumed to function correctly on the FHIR server being tested -->
   <required value="[boolean]"/><!-- 1..1 Are the capabilities required? -->
   <validated value="[boolean]"/><!-- 1..1 Are the capabilities validated? -->
   <description value="[string]"/><!-- 0..1 The expected capabilities of the server -->
   <origin value="[integer]"/><!-- 0..* Which origin server these requirements apply to -->
   <destination value="[integer]"/><!-- 0..1 Which server these requirements apply to -->
   <link value="[uri]"/><!-- 0..* Links to the FHIR specification -->
   <capabilities><!-- 1..1 canonical(CapabilityStatement) Required Capability Statement --></capabilities>
  </capability>
 </metadata>
 <fixture>  <!-- 0..* Fixture in the test script - by reference (uri) -->
  <autocreate value="[boolean]"/><!-- 1..1 Whether or not to implicitly create the fixture during setup -->
  <autodelete value="[boolean]"/><!-- 1..1 Whether or not to implicitly delete the fixture during teardown -->
  <resource><!-- 0..1 Reference(Any) Reference of the resource --></resource>
 </fixture>
 <profile><!-- 0..* Reference(Any) Reference of the validation profile --></profile>
 <variable>  <!-- 0..* Placeholder for evaluated elements -->
  <name value="[string]"/><!-- 1..1 Descriptive name for this variable -->
  <defaultValue value="[string]"/><!-- 0..1 Default, hard-coded, or user-defined value for this variable -->
  <description value="[string]"/><!-- 0..1 Natural language description of the variable -->
  <expression value="[string]"/><!-- 0..1 The FHIRPath expression against the fixture body -->
  <headerField value="[string]"/><!-- 0..1 HTTP header field name for source -->
  <hint value="[string]"/><!-- 0..1 Hint help text for default value to enter -->
  <path value="[string]"/><!-- 0..1 XPath or JSONPath against the fixture body -->
  <sourceId value="[id]"/><!-- 0..1 Fixture Id of source expression or headerField within this variable -->
 </variable>
 <setup>  <!-- 0..1 A series of required setup operations before tests are executed -->
  <action>  <!-- 1..* A setup operation or assert to perform -->
   <operation>  <!-- 0..1 The setup operation to perform -->
    <type><!-- 0..1 Coding The operation code type that will be executed --></type>
    <resource value="[code]"/><!-- 0..1 Resource type -->
    <label value="[string]"/><!-- 0..1 Tracking/logging operation label -->
    <description value="[string]"/><!-- 0..1 Tracking/reporting operation description -->
    <accept value="[code]"/><!-- 0..1 Mime type to accept in the payload of the response, with charset etc. -->
    <contentType value="[code]"/><!-- 0..1 Mime type of the request payload contents, with charset etc. -->
    <destination value="[integer]"/><!-- 0..1 Server responding to the request -->
    <encodeRequestUrl value="[boolean]"/><!-- 1..1 Whether or not to send the request url in encoded format -->
    <method value="[code]"/><!-- 0..1 delete | get | options | patch | post | put | head -->
    <origin value="[integer]"/><!-- 0..1 Server initiating the request -->
    <params value="[string]"/><!-- 0..1 Explicitly defined path parameters -->
    <requestHeader>  <!-- 0..* Each operation can have one or more header elements -->
     <field value="[string]"/><!-- 1..1 HTTP header field name -->
     <value value="[string]"/><!-- 1..1 HTTP headerfield value -->
    </requestHeader>
    <requestId value="[id]"/><!-- 0..1 Fixture Id of mapped request -->
    <responseId value="[id]"/><!-- 0..1 Fixture Id of mapped response -->
    <sourceId value="[id]"/><!-- 0..1 Fixture Id of body for PUT and POST requests -->
    <targetId value="[id]"/><!-- 0..1 Id of fixture used for extracting the [id],  [type], and [vid] for GET requests -->
    <url value="[string]"/><!-- 0..1 Request URL -->
   </operation>
   <assert>  <!-- 0..1 The assertion to perform -->
    <label value="[string]"/><!-- 0..1 Tracking/logging assertion label -->
    <description value="[string]"/><!-- 0..1 Tracking/reporting assertion description -->
    <direction value="[code]"/><!-- 0..1 response | request -->
    <compareToSourceId value="[string]"/><!-- 0..1 Id of the source fixture to be evaluated -->
    <compareToSourceExpression value="[string]"/><!-- 0..1 The FHIRPath expression to evaluate against the source fixture -->
    <compareToSourcePath value="[string]"/><!-- 0..1 XPath or JSONPath expression to evaluate against the source fixture -->
    <contentType value="[code]"/><!-- 0..1 Mime type to compare against the 'Content-Type' header -->
    <expression value="[string]"/><!-- 0..1 The FHIRPath expression to be evaluated -->
    <headerField value="[string]"/><!-- 0..1 HTTP header field name -->
    <minimumId value="[string]"/><!-- 0..1 Fixture Id of minimum content resource -->
    <navigationLinks value="[boolean]"/><!-- 0..1 Perform validation on navigation links? -->
    <operator value="[code]"/><!-- 0..1 equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval -->
    <path value="[string]"/><!-- 0..1 XPath or JSONPath expression -->
    <requestMethod value="[code]"/><!-- 0..1 delete | get | options | patch | post | put | head -->
    <requestURL value="[string]"/><!-- 0..1 Request URL comparison value -->
    <resource value="[code]"/><!-- 0..1 Resource type -->
    <response value="[code]"/><!-- 0..1 okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable -->
    <responseCode value="[string]"/><!-- 0..1 HTTP response code to test -->
    <sourceId value="[id]"/><!-- 0..1 Fixture Id of source expression or headerField -->
    <validateProfileId value="[id]"/><!-- 0..1 Profile Id of validation profile reference -->
    <value value="[string]"/><!-- 0..1 The value to compare to -->
    <warningOnly value="[boolean]"/><!-- 1..1 Will this assert produce a warning only on error? -->
   </assert>
  </action>
 </setup>
 <test>  <!-- 0..* A test in this script -->
  <name value="[string]"/><!-- 0..1 Tracking/logging name of this test -->
  <description value="[string]"/><!-- 0..1 Tracking/reporting short description of the test -->
  <action>  <!-- 1..* A test operation or assert to perform -->
   <operation><!-- 0..1 Content as for TestScript.setup.action.operation The setup operation to perform --></operation>
   <assert><!-- 0..1 Content as for TestScript.setup.action.assert The setup assertion to perform --></assert>
  </action>
 </test>
 <teardown>  <!-- 0..1 A series of required clean up steps -->
  <action>  <!-- 1..* One or more teardown operations to perform -->
   <operation><!-- 1..1 Content as for TestScript.setup.action.operation The teardown operation to perform --></operation>
  </action>
 </teardown>
</TestScript>

JSON Template

{doco
  "resourceType" : "TestScript",
  // from Resource: id, meta, implicitRules, and language
  // from DomainResource: text, contained, extension, and modifierExtension
  "url" : "<uri>", // R!  Canonical identifier for this test script, represented as a URI (globally unique)
  "identifier" : { Identifier }, // Additional identifier for the test script
  "version" : "<string>", // Business version of the test script
  "name" : "<string>", // R!  Name for this test script (computer friendly)
  "title" : "<string>", // Name for this test script (human friendly)
  "status" : "<code>", // R!  draft | active | retired | unknown
  "experimental" : <boolean>, // For testing purposes, not real usage
  "date" : "<dateTime>", // Date last changed
  "publisher" : "<string>", // Name of the publisher (organization or individual)
  "contact" : [{ ContactDetail }], // Contact details for the publisher
  "description" : "<markdown>", // Natural language description of the test script
  "useContext" : [{ UsageContext }], // The context that the content is intended to support
  "jurisdiction" : [{ CodeableConcept }], // Intended jurisdiction for test script (if applicable)
  "purpose" : "<markdown>", // Why this test script is defined
  "copyright" : "<markdown>", // Use and/or publishing restrictions
  "origin" : [{ // An abstract server representing a client or sender in a message exchange
    "index" : <integer>, // R!  The index of the abstract origin server starting at 1
    "profile" : { Coding } // R!  FHIR-Client | FHIR-SDC-FormFiller
  }],
  "destination" : [{ // An abstract server representing a destination or receiver in a message exchange
    "index" : <integer>, // R!  The index of the abstract destination server starting at 1
    "profile" : { Coding } // R!  FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
  }],
  "metadata" : { // Required capability that is assumed to function correctly on the FHIR server being tested
    "link" : [{ // Links to the FHIR specification
      "url" : "<uri>", // R!  URL to the specification
      "description" : "<string>" // Short description
    }],
    "capability" : [{ // R!  Capabilities  that are assumed to function correctly on the FHIR server being tested
      "required" : <boolean>, // R!  Are the capabilities required?
      "validated" : <boolean>, // R!  Are the capabilities validated?
      "description" : "<string>", // The expected capabilities of the server
      "origin" : [<integer>], // Which origin server these requirements apply to
      "destination" : <integer>, // Which server these requirements apply to
      "link" : ["<uri>"], // Links to the FHIR specification
      "capabilities" : { canonical(CapabilityStatement) } // R!  Required Capability Statement
    }]
  },
  "fixture" : [{ // Fixture in the test script - by reference (uri)
    "autocreate" : <boolean>, // R!  Whether or not to implicitly create the fixture during setup
    "autodelete" : <boolean>, // R!  Whether or not to implicitly delete the fixture during teardown
    "resource" : { Reference(Any) } // Reference of the resource
  }],
  "profile" : [{ Reference(Any) }], // Reference of the validation profile
  "variable" : [{ // Placeholder for evaluated elements
    "name" : "<string>", // R!  Descriptive name for this variable
    "defaultValue" : "<string>", // Default, hard-coded, or user-defined value for this variable
    "description" : "<string>", // Natural language description of the variable
    "expression" : "<string>", // The FHIRPath expression against the fixture body
    "headerField" : "<string>", // HTTP header field name for source
    "hint" : "<string>", // Hint help text for default value to enter
    "path" : "<string>", // XPath or JSONPath against the fixture body
    "sourceId" : "<id>" // Fixture Id of source expression or headerField within this variable
  }],
  "setup" : { // A series of required setup operations before tests are executed
    "action" : [{ // R!  A setup operation or assert to perform
      "operation" : { // The setup operation to perform
        "type" : { Coding }, // The operation code type that will be executed
        "resource" : "<code>", // Resource type
        "label" : "<string>", // Tracking/logging operation label
        "description" : "<string>", // Tracking/reporting operation description
        "accept" : "<code>", // Mime type to accept in the payload of the response, with charset etc.
        "contentType" : "<code>", // Mime type of the request payload contents, with charset etc.
        "destination" : <integer>, // Server responding to the request
        "encodeRequestUrl" : <boolean>, // R!  Whether or not to send the request url in encoded format
        "method" : "<code>", // delete | get | options | patch | post | put | head
        "origin" : <integer>, // Server initiating the request
        "params" : "<string>", // Explicitly defined path parameters
        "requestHeader" : [{ // Each operation can have one or more header elements
          "field" : "<string>", // R!  HTTP header field name
          "value" : "<string>" // R!  HTTP headerfield value
        }],
        "requestId" : "<id>", // Fixture Id of mapped request
        "responseId" : "<id>", // Fixture Id of mapped response
        "sourceId" : "<id>", // Fixture Id of body for PUT and POST requests
        "targetId" : "<id>", // Id of fixture used for extracting the [id],  [type], and [vid] for GET requests
        "url" : "<string>" // Request URL
      },
      "assert" : { // The assertion to perform
        "label" : "<string>", // Tracking/logging assertion label
        "description" : "<string>", // Tracking/reporting assertion description
        "direction" : "<code>", // response | request
        "compareToSourceId" : "<string>", // Id of the source fixture to be evaluated
        "compareToSourceExpression" : "<string>", // The FHIRPath expression to evaluate against the source fixture
        "compareToSourcePath" : "<string>", // XPath or JSONPath expression to evaluate against the source fixture
        "contentType" : "<code>", // Mime type to compare against the 'Content-Type' header
        "expression" : "<string>", // The FHIRPath expression to be evaluated
        "headerField" : "<string>", // HTTP header field name
        "minimumId" : "<string>", // Fixture Id of minimum content resource
        "navigationLinks" : <boolean>, // Perform validation on navigation links?
        "operator" : "<code>", // equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
        "path" : "<string>", // XPath or JSONPath expression
        "requestMethod" : "<code>", // delete | get | options | patch | post | put | head
        "requestURL" : "<string>", // Request URL comparison value
        "resource" : "<code>", // Resource type
        "response" : "<code>", // okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
        "responseCode" : "<string>", // HTTP response code to test
        "sourceId" : "<id>", // Fixture Id of source expression or headerField
        "validateProfileId" : "<id>", // Profile Id of validation profile reference
        "value" : "<string>", // The value to compare to
        "warningOnly" : <boolean> // R!  Will this assert produce a warning only on error?
      }
    }]
  },
  "test" : [{ // A test in this script
    "name" : "<string>", // Tracking/logging name of this test
    "description" : "<string>", // Tracking/reporting short description of the test
    "action" : [{ // R!  A test operation or assert to perform
      "operation" : { Content as for TestScript.setup.action.operation }, // The setup operation to perform
      "assert" : { Content as for TestScript.setup.action.assert } // The setup assertion to perform
    }]
  }],
  "teardown" : { // A series of required clean up steps
    "action" : [{ // R!  One or more teardown operations to perform
      "operation" : { Content as for TestScript.setup.action.operation } // R!  The teardown operation to perform
    }]
  }
}

Turtle Template

@prefix fhir: <http://hl7.org/fhir/> .doco


[ a fhir:TestScript;
  fhir:nodeRole fhir:treeRoot; # if this is the parser root

  # from Resource: .id, .meta, .implicitRules, and .language
  # from DomainResource: .text, .contained, .extension, and .modifierExtension
  fhir:TestScript.url [ uri ]; # 1..1 Canonical identifier for this test script, represented as a URI (globally unique)
  fhir:TestScript.identifier [ Identifier ]; # 0..1 Additional identifier for the test script
  fhir:TestScript.version [ string ]; # 0..1 Business version of the test script
  fhir:TestScript.name [ string ]; # 1..1 Name for this test script (computer friendly)
  fhir:TestScript.title [ string ]; # 0..1 Name for this test script (human friendly)
  fhir:TestScript.status [ code ]; # 1..1 draft | active | retired | unknown
  fhir:TestScript.experimental [ boolean ]; # 0..1 For testing purposes, not real usage
  fhir:TestScript.date [ dateTime ]; # 0..1 Date last changed
  fhir:TestScript.publisher [ string ]; # 0..1 Name of the publisher (organization or individual)
  fhir:TestScript.contact [ ContactDetail ], ... ; # 0..* Contact details for the publisher
  fhir:TestScript.description [ markdown ]; # 0..1 Natural language description of the test script
  fhir:TestScript.useContext [ UsageContext ], ... ; # 0..* The context that the content is intended to support
  fhir:TestScript.jurisdiction [ CodeableConcept ], ... ; # 0..* Intended jurisdiction for test script (if applicable)
  fhir:TestScript.purpose [ markdown ]; # 0..1 Why this test script is defined
  fhir:TestScript.copyright [ markdown ]; # 0..1 Use and/or publishing restrictions
  fhir:TestScript.origin [ # 0..* An abstract server representing a client or sender in a message exchange
    fhir:TestScript.origin.index [ integer ]; # 1..1 The index of the abstract origin server starting at 1
    fhir:TestScript.origin.profile [ Coding ]; # 1..1 FHIR-Client | FHIR-SDC-FormFiller
  ], ...;
  fhir:TestScript.destination [ # 0..* An abstract server representing a destination or receiver in a message exchange
    fhir:TestScript.destination.index [ integer ]; # 1..1 The index of the abstract destination server starting at 1
    fhir:TestScript.destination.profile [ Coding ]; # 1..1 FHIR-Server | FHIR-SDC-FormManager | FHIR-SDC-FormReceiver | FHIR-SDC-FormProcessor
  ], ...;
  fhir:TestScript.metadata [ # 0..1 Required capability that is assumed to function correctly on the FHIR server being tested
    fhir:TestScript.metadata.link [ # 0..* Links to the FHIR specification
      fhir:TestScript.metadata.link.url [ uri ]; # 1..1 URL to the specification
      fhir:TestScript.metadata.link.description [ string ]; # 0..1 Short description
    ], ...;
    fhir:TestScript.metadata.capability [ # 1..* Capabilities  that are assumed to function correctly on the FHIR server being tested
      fhir:TestScript.metadata.capability.required [ boolean ]; # 1..1 Are the capabilities required?
      fhir:TestScript.metadata.capability.validated [ boolean ]; # 1..1 Are the capabilities validated?
      fhir:TestScript.metadata.capability.description [ string ]; # 0..1 The expected capabilities of the server
      fhir:TestScript.metadata.capability.origin [ integer ], ... ; # 0..* Which origin server these requirements apply to
      fhir:TestScript.metadata.capability.destination [ integer ]; # 0..1 Which server these requirements apply to
      fhir:TestScript.metadata.capability.link [ uri ], ... ; # 0..* Links to the FHIR specification
      fhir:TestScript.metadata.capability.capabilities [ canonical(CapabilityStatement) ]; # 1..1 Required Capability Statement
    ], ...;
  ];
  fhir:TestScript.fixture [ # 0..* Fixture in the test script - by reference (uri)
    fhir:TestScript.fixture.autocreate [ boolean ]; # 1..1 Whether or not to implicitly create the fixture during setup
    fhir:TestScript.fixture.autodelete [ boolean ]; # 1..1 Whether or not to implicitly delete the fixture during teardown
    fhir:TestScript.fixture.resource [ Reference(Any) ]; # 0..1 Reference of the resource
  ], ...;
  fhir:TestScript.profile [ Reference(Any) ], ... ; # 0..* Reference of the validation profile
  fhir:TestScript.variable [ # 0..* Placeholder for evaluated elements
    fhir:TestScript.variable.name [ string ]; # 1..1 Descriptive name for this variable
    fhir:TestScript.variable.defaultValue [ string ]; # 0..1 Default, hard-coded, or user-defined value for this variable
    fhir:TestScript.variable.description [ string ]; # 0..1 Natural language description of the variable
    fhir:TestScript.variable.expression [ string ]; # 0..1 The FHIRPath expression against the fixture body
    fhir:TestScript.variable.headerField [ string ]; # 0..1 HTTP header field name for source
    fhir:TestScript.variable.hint [ string ]; # 0..1 Hint help text for default value to enter
    fhir:TestScript.variable.path [ string ]; # 0..1 XPath or JSONPath against the fixture body
    fhir:TestScript.variable.sourceId [ id ]; # 0..1 Fixture Id of source expression or headerField within this variable
  ], ...;
  fhir:TestScript.setup [ # 0..1 A series of required setup operations before tests are executed
    fhir:TestScript.setup.action [ # 1..* A setup operation or assert to perform
      fhir:TestScript.setup.action.operation [ # 0..1 The setup operation to perform
        fhir:TestScript.setup.action.operation.type [ Coding ]; # 0..1 The operation code type that will be executed
        fhir:TestScript.setup.action.operation.resource [ code ]; # 0..1 Resource type
        fhir:TestScript.setup.action.operation.label [ string ]; # 0..1 Tracking/logging operation label
        fhir:TestScript.setup.action.operation.description [ string ]; # 0..1 Tracking/reporting operation description
        fhir:TestScript.setup.action.operation.accept [ code ]; # 0..1 Mime type to accept in the payload of the response, with charset etc.
        fhir:TestScript.setup.action.operation.contentType [ code ]; # 0..1 Mime type of the request payload contents, with charset etc.
        fhir:TestScript.setup.action.operation.destination [ integer ]; # 0..1 Server responding to the request
        fhir:TestScript.setup.action.operation.encodeRequestUrl [ boolean ]; # 1..1 Whether or not to send the request url in encoded format
        fhir:TestScript.setup.action.operation.method [ code ]; # 0..1 delete | get | options | patch | post | put | head
        fhir:TestScript.setup.action.operation.origin [ integer ]; # 0..1 Server initiating the request
        fhir:TestScript.setup.action.operation.params [ string ]; # 0..1 Explicitly defined path parameters
        fhir:TestScript.setup.action.operation.requestHeader [ # 0..* Each operation can have one or more header elements
          fhir:TestScript.setup.action.operation.requestHeader.field [ string ]; # 1..1 HTTP header field name
          fhir:TestScript.setup.action.operation.requestHeader.value [ string ]; # 1..1 HTTP headerfield value
        ], ...;
        fhir:TestScript.setup.action.operation.requestId [ id ]; # 0..1 Fixture Id of mapped request
        fhir:TestScript.setup.action.operation.responseId [ id ]; # 0..1 Fixture Id of mapped response
        fhir:TestScript.setup.action.operation.sourceId [ id ]; # 0..1 Fixture Id of body for PUT and POST requests
        fhir:TestScript.setup.action.operation.targetId [ id ]; # 0..1 Id of fixture used for extracting the [id],  [type], and [vid] for GET requests
        fhir:TestScript.setup.action.operation.url [ string ]; # 0..1 Request URL
      ];
      fhir:TestScript.setup.action.assert [ # 0..1 The assertion to perform
        fhir:TestScript.setup.action.assert.label [ string ]; # 0..1 Tracking/logging assertion label
        fhir:TestScript.setup.action.assert.description [ string ]; # 0..1 Tracking/reporting assertion description
        fhir:TestScript.setup.action.assert.direction [ code ]; # 0..1 response | request
        fhir:TestScript.setup.action.assert.compareToSourceId [ string ]; # 0..1 Id of the source fixture to be evaluated
        fhir:TestScript.setup.action.assert.compareToSourceExpression [ string ]; # 0..1 The FHIRPath expression to evaluate against the source fixture
        fhir:TestScript.setup.action.assert.compareToSourcePath [ string ]; # 0..1 XPath or JSONPath expression to evaluate against the source fixture
        fhir:TestScript.setup.action.assert.contentType [ code ]; # 0..1 Mime type to compare against the 'Content-Type' header
        fhir:TestScript.setup.action.assert.expression [ string ]; # 0..1 The FHIRPath expression to be evaluated
        fhir:TestScript.setup.action.assert.headerField [ string ]; # 0..1 HTTP header field name
        fhir:TestScript.setup.action.assert.minimumId [ string ]; # 0..1 Fixture Id of minimum content resource
        fhir:TestScript.setup.action.assert.navigationLinks [ boolean ]; # 0..1 Perform validation on navigation links?
        fhir:TestScript.setup.action.assert.operator [ code ]; # 0..1 equals | notEquals | in | notIn | greaterThan | lessThan | empty | notEmpty | contains | notContains | eval
        fhir:TestScript.setup.action.assert.path [ string ]; # 0..1 XPath or JSONPath expression
        fhir:TestScript.setup.action.assert.requestMethod [ code ]; # 0..1 delete | get | options | patch | post | put | head
        fhir:TestScript.setup.action.assert.requestURL [ string ]; # 0..1 Request URL comparison value
        fhir:TestScript.setup.action.assert.resource [ code ]; # 0..1 Resource type
        fhir:TestScript.setup.action.assert.response [ code ]; # 0..1 okay | created | noContent | notModified | bad | forbidden | notFound | methodNotAllowed | conflict | gone | preconditionFailed | unprocessable
        fhir:TestScript.setup.action.assert.responseCode [ string ]; # 0..1 HTTP response code to test
        fhir:TestScript.setup.action.assert.sourceId [ id ]; # 0..1 Fixture Id of source expression or headerField
        fhir:TestScript.setup.action.assert.validateProfileId [ id ]; # 0..1 Profile Id of validation profile reference
        fhir:TestScript.setup.action.assert.value [ string ]; # 0..1 The value to compare to
        fhir:TestScript.setup.action.assert.warningOnly [ boolean ]; # 1..1 Will this assert produce a warning only on error?
      ];
    ], ...;
  ];
  fhir:TestScript.test [ # 0..* A test in this script
    fhir:TestScript.test.name [ string ]; # 0..1 Tracking/logging name of this test
    fhir:TestScript.test.description [ string ]; # 0..1 Tracking/reporting short description of the test
    fhir:TestScript.test.action [ # 1..* A test operation or assert to perform
      fhir:TestScript.test.action.operation [ See TestScript.setup.action.operation ]; # 0..1 The setup operation to perform
      fhir:TestScript.test.action.assert [ See TestScript.setup.action.assert ]; # 0..1 The setup assertion to perform
    ], ...;
  ], ...;
  fhir:TestScript.teardown [ # 0..1 A series of required clean up steps
    fhir:TestScript.teardown.action [ # 1..* One or more teardown operations to perform
      fhir:TestScript.teardown.action.operation [ See TestScript.setup.action.operation ]; # 1..1 The teardown operation to perform
    ], ...;
  ];
]

Changes since Release 4

TestScript
  • No Changes

See the Full Difference for further information

This analysis is available as XML or JSON.

Conversions between R3 and R4

See R3 <--> R4 Conversion Maps (status = 7 tests that all execute ok. 1 fail round-trip testing and 7 r3 resources are invalid (0 errors).)

 

See the Profiles & Extensions and the alternate definitions: Master Definition XML + JSON, XML Schema/Schematron + JSON Schema, ShEx (for Turtle) + see the extensions & the dependency analysis

7.3.5.1 Terminology Bindings

PathDefinitionTypeReference
TestScript.status RequiredPublicationStatus
TestScript.jurisdiction ExtensibleJurisdiction ValueSet
TestScript.origin.profile ExtensibleTestScriptProfileOriginType
TestScript.destination.profile ExtensibleTestScriptProfileDestinationType
TestScript.setup.action.operation.type ExtensibleTestScriptOperationCode
TestScript.setup.action.operation.resource RequiredFHIRDefinedType
TestScript.setup.action.operation.accept RequiredMime Types
TestScript.setup.action.operation.contentType RequiredMime Types
TestScript.setup.action.operation.method RequiredTestScriptRequestMethodCode
TestScript.setup.action.assert.direction RequiredAssertionDirectionType
TestScript.setup.action.assert.contentType RequiredMime Types
TestScript.setup.action.assert.operator RequiredAssertionOperatorType
TestScript.setup.action.assert.requestMethod RequiredTestScriptRequestMethodCode
TestScript.setup.action.assert.resource RequiredFHIRDefinedType
TestScript.setup.action.assert.response RequiredAssertionResponseTypes

7.3.5.2 Constraints

idLevelLocationDescriptionExpression
tst-0Warning (base)Name should be usable as an identifier for the module by machine processing applications such as code generationname.exists() implies name.matches('[A-Z]([A-Za-z0-9_]){0,254}')
tst-1Rule TestScript.setup.actionSetup action SHALL contain either an operation or assert but not both.operation.exists() xor assert.exists()
tst-2Rule TestScript.test.actionTest action SHALL contain either an operation or assert but not both.operation.exists() xor assert.exists()
tst-3Rule TestScript.variableVariable can only contain one of expression, headerField or path.expression.empty() or headerField.empty() or path.empty()
tst-4Rule TestScript.metadataTestScript metadata capability SHALL contain required or validated or both.capability.required.exists() or capability.validated.exists()
tst-5Rule TestScript.setup.action.assertOnly a single assertion SHALL be present within setup action assert element.extension.exists() or (contentType.count() + expression.count() + headerField.count() + minimumId.count() + navigationLinks.count() + path.count() + requestMethod.count() + resource.count() + responseCode.count() + response.count() + validateProfileId.count() <=1)
tst-6Rule TestScript.test.action.assertOnly a single assertion SHALL be present within test action assert element.extension.exists() or (contentType.count() + expression.count() + headerField.count() + minimumId.count() + navigationLinks.count() + path.count() + requestMethod.count() + resource.count() + responseCode.count() + response.count() + validateProfileId.count() <=1)
tst-7Rule TestScript.setup.action.operationSetup operation SHALL contain either sourceId or targetId or params or url.sourceId.exists() or (targetId.count() + url.count() + params.count() = 1) or (type.code in ('capabilities' |'search' | 'transaction' | 'history'))
tst-8Rule TestScript.test.action.operationTest operation SHALL contain either sourceId or targetId or params or url.sourceId.exists() or (targetId.count() + url.count() + params.count() = 1) or (type.code in ('capabilities' | 'search' | 'transaction' | 'history'))
tst-9Rule TestScript.teardown.action.operationTeardown operation SHALL contain either sourceId or targetId or params or url.sourceId.exists() or (targetId.count() + url.count() + params.count() = 1) or (type.code in ('capabilities' | 'search' | 'transaction' | 'history'))
tst-10Rule TestScript.setup.action.assertSetup action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.compareToSourceId.empty() xor (compareToSourceExpression.exists() or compareToSourcePath.exists())
tst-11Rule TestScript.test.action.assertTest action assert SHALL contain either compareToSourceId and compareToSourceExpression, compareToSourceId and compareToSourcePath or neither.compareToSourceId.empty() xor (compareToSourceExpression.exists() or compareToSourcePath.exists())
tst-12Rule TestScript.setup.action.assertSetup action assert response and responseCode SHALL be empty when direction equals request(response.empty() and responseCode.empty() and direction = 'request') or direction.empty() or direction = 'response'
tst-13Rule TestScript.test.action.assertTest action assert response and response and responseCode SHALL be empty when direction equals request(response.empty() and responseCode.empty() and direction = 'request') or direction.empty() or direction = 'response'

7.3.6 Notes

Please refer to the Testing FHIR - How Tos for examples on working with this resource.

7.3.7 Search Parameters

Search parameters for this resource. The common parameters also apply. See Searching for more information about searching in REST, messaging, and services.

NameTypeDescriptionExpressionIn Common
contexttokenA use context assigned to the test script(TestScript.useContext.value as CodeableConcept)
context-quantityquantityA quantity- or range-valued use context assigned to the test script(TestScript.useContext.value as Quantity) | (TestScript.useContext.value as Range)
context-typetokenA type of use context assigned to the test scriptTestScript.useContext.code
context-type-quantitycompositeA use context type and quantity- or range-based value assigned to the test scriptOn TestScript.useContext:
  context-type: code
  context-quantity: value.as(Quantity) | value.as(Range)
context-type-valuecompositeA use context type and value assigned to the test scriptOn TestScript.useContext:
  context-type: code
  context: value.as(CodeableConcept)
datedateThe test script publication dateTestScript.date
descriptionstringThe description of the test scriptTestScript.description
identifiertokenExternal identifier for the test scriptTestScript.identifier
jurisdictiontokenIntended jurisdiction for the test scriptTestScript.jurisdiction
namestringComputationally friendly name of the test scriptTestScript.name
publisherstringName of the publisher of the test scriptTestScript.publisher
statustokenThe current status of the test scriptTestScript.status
testscript-capabilitystringTestScript required and validated capabilityTestScript.metadata.capability.description
titlestringThe human-friendly name of the test scriptTestScript.title
urluriThe uri that identifies the test scriptTestScript.url
versiontokenThe business version of the test scriptTestScript.version