This page is part of the FHIR Specification (v3.3.0: R4 Ballot 2). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

3.1.1 Search

FHIR Infrastructure Work Group

Maturity Level: 5

Ballot Status: Normative

Normative Candidate Note: This page is candidate normative content for R4 in the Infrastructure Package. Once normative, it will lose it's Maturity Level, and breaking changes will no longer be made.

Searching for resources is fundamental to the mechanics of FHIR. Search operations traverse through an existing set of resources filtering by parameters supplied to the search operation. The text below describes the FHIR search framework, starting with simple cases moving to the more complex. Implementers need only implement the amount of complexity that they require for their implementations.

3.1.1.1 Summary Table

In addition, there is a special search parameters _query and _filter that allow for an alternative method of searching.

Also, there is a single page that lists all the search parameters.

3.1.1.2 Introduction

In the simplest case, a search is executed by performing a GET operation in the RESTful framework:

 GET [base]/[type]?name=value&...{&_format=[mime-type]}}

For this RESTful search (see definition in RESTful API), the parameters are a series of name=[value] pairs encoded in the URL or as an application/x-www-form-urlencoded submission for a POST:

 POST  [base]/[type]/_search{?[parameters]{&_format=[mime-type]}}

The server determines which of the set of resources it serves meet the specific criteria, and returns the results in the HTTP response as a bundle which includes the resources that are the results of the search. Note that the _format parameter works for search like for other interactions.

Search operations are executed in one of three defined contexts that control which set of resources are being searched:

• A specified resource type: GET [base]/[type]?parameter(s)
• A specified compartment, perhaps with a specified resource type in that compartment: GET [base]/Patient/[id]/[type]?parameter(s)
• All resource types: GET [base]?parameter(s) (parameters common to all types only)

Search operations can also be implemented in the messaging framework.

The server determines which of their resources meet the criteria contained in the search parameters as described below. However the server has the prerogative to return additional search results if it believes them to be relevant. Note: There is a special search for the most relevant context in which the search set is indeterminate: Patient MPI Search.

Search using GET may include sensitive information in the search parameters. Therefore, secure communications and endpoint management are recommended, see Security Communications

The response to any search operation is always a list of resources in a Bundle. An alternative approach is to use GraphQL.

3.1.1.3 Handling Errors

If a server is unable to execute a search request, it may return an error. A HTTP status code of 403 signifies that the server refused to perform the search, while other 4xx and 5xx codes signify that some sort of error has occurred. When the search fails, a server SHOULD return an OperationOutcome detailing the cause of the failure. Note: An empty search result is not a failure.

In some cases, parameters may cause an error, or might not be able to match anything. For instance:

• A parameter may refer to a non-existent resource e.g. GET [base]/Observation?subject=101, where "101" does not exist
• A parameter may refer to a non-existent resource e.g. GET [base]/Observation?patient.identifier=http://example.com/fhir/identifier/mrn|123456, where there is no patient for MRN 123456
• A parameter may refer to an unknown code e.g. GET [base]/Observation?code=loinc|1234-1, where the LOINC code "1234-1" is not known to the server
• A parameter may refer to a time that is out of scope e.g. GET [base]/Condition?onset=le1995, where the system only has data going back to 2001
• A parameter may use an illegal or unacceptable modifier e.g. GET [base]/Condition?onset:text=1995, where the modifier cannot be processed by the server
• A data time parameter may have incorrect format e.g. GET [base]/Condition?onset=23%20May%202009
• A parameter may be unknown or unsupported (see below)

Note: Empty parameters are not an error - they are just ignored by the server.

Where the content of the parameter is syntactically incorrect, servers SHOULD return an error. However, where the issue is a logical condition (e.g. unknown subject or code), the server SHOULD process the search, including processing the parameter - with the result of returning an empty search set, since the parameter cannot be satisfied.

In such cases, the search process MAY include an OperationOutcome in the search set that contains additional hints and warnings about the search process. This is included in the search results as an entry with search mode = outcome. Clients can use this information to improve future searches. If, for example, a client performed the following search:

GET [base]/Observation?patient.identifier=http://example.com/fhir/identifier/mrn|123456

and there is no patient for MRN 123456, the server would return a bundle with a warning.

Unknown and unsupported parameters

Servers may receive parameters from the client that they do not recognize, or may receive parameters they recognize but do not support (either in general, or for a specific search). In general, servers SHOULD ignore unknown or unsupported parameters for the following reasons:

• Various HTTP stacks and proxies may add parameters that aren't under the control of the client
• The client can determine what parameters the server used by examining the self link in the return (see below)

Clients can specify how the server should behave, by using the prefer header

• Prefer: handling=strict: Client requests that the server return an error for any unknown or unsupported parameter
• Prefer: handling=lenient: Client requests that the server ignore any unknown or unsupported parameter

Servers SHOULD honor the client's request, but are not required to do so.

3.1.1.4 Standard Parameters

3.1.1.4.1 Parameters for all resources

The following parameters apply to all resources: _content, _id, _lastUpdated, _profile, _query, _security, _source, _tag. In addition, the search parameter _text and _filter, (documented below) also applies to all resources (as do the search result parameters).

The search parameter _id refers to the logical id of the resource, and can be used when the search context specifies a resource type:

 GET [base]/Patient?_id=23

This search finds the patient resource with the given id (there can only be one resource for a given id). Functionally, this is equivalent to a simple read operation:

 GET [base]/Patient/23

However, the search with parameter _id returns a bundle with the requested resource, instead of just the resource itself. Additional parameters can be added which may provide additional functionality on top of this base read equivalence (e.g. _include). Note that although the _id parameter has a type of token, because servers SHALL use exact match with it, there is no system for the _id parameter. Note that matches on _id are always case sensitive.

The search parameter _lastUpdated can be used to select resources based on the last time they were changed:

 GET [base]/Observation?_lastUpdated=gt2010-10-01

This search finds any observations changed since 1-Oct 2010. When this search parameter is used, applications should consider synchronization approaches (RESTful history or the Subscription resource).

The search parameters _tag, _profile and _security parameters search on the equivalent elements in the meta element. For example,

 GET [base]/Condition?_tag=http://acme.org/codes|needs-review

searches for all Condition resources with the tag:

{
  "system" : "http://acme.org/codes",
  "code" : "needs-review"
}

In the same manner:

 GET [base]/DiagnosticReport?_profile=http://hl7.org/fhir/StructureDefinition/lipid
 GET [base]/DiagnosticReport?_profile=Profile/lipid

restricts the search to only DiagnosticReport resources that are tagged as conforming to a particular profile. The second reference is relative, and refers a local profile on the same server.

_tag, _profile and _security parameters are all token types (see below).

3.1.1.4.2 Parameters for each resource

In addition to the _id parameter which exists for all resources, each FHIR resource type defines its own set of search parameters with their names, types, and meanings. These search parameters are on the same page as the resource definitions, and are also published as part of the standard Capability statement (XML or JSON).

In general, the defined search parameters correspond to a single element in the resource, but this is not required, and some search parameters refer to the same type of element in multiple places, or refer to derived values.

Some search parameters defined by resources are associated with more than one path in a resource. This means that the search parameter matches if any of the paths contain matching content. If a path matches, the whole resource is returned in the search results. The client may have to examine the resource to determine which path contains the match.

Servers are not required to implement any of the standard search parameters (except for the _id parameter described above), and may define their own parameters.

3.1.1.4.3 Search Parameter Types

Each search parameter is defined by a type that specifies how the search parameter behaves. These are the defined parameter types:

The search parameters can also append "modifiers" that control their behavior. The kinds of modifiers that available is dependent on the type of parameter being modified.

3.1.1.4.4 Modifiers

Parameters are defined per resource. Parameter names may specify a modifier as a suffix. The modifiers are separated from the parameter name by a colon. Modifiers are:

• For all parameters (except combination): :missing; e.g. gender:missing=true (or false). Searching for gender:missing=true will return all the resources that don't have a value for the gender parameter (which usually equates to not having the relevant element in the resource). Searching for gender:missing=false will return all the resources that have a value for the gender parameter. For simple data type elements, :missing=true will match on all elements where either the underlying element is omitted or where the element is present with extensions but no @value is specified
• For string: :exact (the match needs to be exact, no partial matches, case sensitive and accent-sensitive), or :contains (case insensitive and accent-insensitive, partial match at start or end), instead of the default behavior (case insensitive and accent-insensitive, partial matches at the start of the string).
• For token: :text (the match does a partial searches on the text portion of a CodeableConcept or the display portion of a Coding), instead of the default search which uses codes. Other defined modifiers are :in, :below, :above and :not-in which are described below.
• For reference: :[type] where [type] is the name of a type of resource, :identifier, and, for some parameters, :above and :below
• For uri: :below, :above indicate that instead of an exact match, either the search term left matches the value, or vice-versa.

Server SHALL reject any search request that contains is suffixed by a modifier that the server does not support for that parameter. For example, if the server supports the name search param, but not the :exact modifier on the name, it should reject a search with the parameter name:exact=Bill, using an HTTP 400 error with an OperationOutcome with a clear error message.

3.1.1.4.5 Prefixes

For the ordered parameter types of number, date, and quantity, a prefix to the parameter value may be used to control the nature of the matching. To avoid URL escaping and visual confusion, the following prefixes are used:

If no prefix is present, the prefix eq is assumed. Note that the way search parameters operate is not the same as the way the operations on two numbers work in a mathematical sense. sa (starts-after) and eb (ends-before) are not used with integer values.

For each prefix above, two interpretations are provided - the simple intent of the prefix and the interpretation of the parameter when applied to ranges. The range interpretation is provided for decimals and dates. Searches are always performed on values that are implicitly or explicitly a range. For instance, the number 2.0 has an implicit range of 1.95 to 2.05, and the date 2015-08-12 has an implicit range of all the time during that day. If the target value is a Range, a Period, or a Timing, then the target is explicitly a range. Three ranges are identified:

The proper use of these ranges is discussed further below.

3.1.1.4.6 number

Searching on a simple numerical value in a resource. Examples:

Note: Uncertainty does not factor in evaluations. The precision of the numbers is considered arbitrarily high. (The way search parameters operate in resources is not the same as whether two numbers are equal to each other in a mathematical sense).

Here are some example searches:

 GET [base]/Encounter?length=gt20

 GET [base]/ImmunizationRecommendation?deo-number=2

3.1.1.4.7 date

A date parameter searches on a date/time or period. As is usual for date/time related functionality, while the concepts are relatively straight-forward, there are a number of subtleties involved in ensuring consistent behavior.

The date parameter format is yyyy-mm-ddThh:mm:ss[Z|(+|-)hh:mm] (the standard XML format).

Technically, this is any of the date, dateTime, and instant data types; e.g. Any degree of precision can be provided, but it SHALL be populated from the left (e.g. can't specify a month without a year), except that the minutes SHALL be present if an hour is present, and you SHOULD provide a time zone if the time part is present. Note: Time can consist of hours and minutes with no seconds, unlike the XML Schema dateTime type. Some user agents may escape the : characters in the URL, and servers SHALL handle this correctly.

Date parameters may be used with the following data types:

Implicitly, a missing lower boundary is "less than" any actual date. A missing upper boundary is "greater than" any actual date. The use of the prefixes:

Other notes:

• When the date parameter is not fully specified, matches against it are based on the behavior of intervals, where:
  • Dates with only the year specified are equivalent to an interval that starts at the first instant of January 1st to the last instant of December 31st, e.g. 2000 is equivalent to an interval of [2000-01-01T00:00, 2000-12-31T23:59].
  • Dates with the year and month are equivalent to an interval that starts at the first instant of the first day of the month and ends on the last instant of the last day of the month, e.g. 2000-04 is equivalent to an interval of [2000-04-01T00:00, 2000-04-30T23:59].
• Where possible, the system should correct for timezones when performing queries. Dates do not have time zones, and time zones should not be considered. Where both search parameters and resource element date times do not have time zones, the servers local time zone should be assumed.

To search for all the procedures in a patient compartment that occurred over a 2 year period:

 GET [base]/Patient/23/Procedure?date=ge2010-01-01&date=le2011-12-31

3.1.1.4.8 string

For a simple string search, a string parameter serves as the input for a case- and accent-insensitive search against sequences of characters. By default, a field matches a string query if the value of the field equals or starts with the supplied parameter value, after both have been normalized by case and accent. The :contains modifier returns results that include the supplied parameter value anywhere within the field being searched. The :exact modifier returns results that match the entire supplied parameter, including casing and accents.

Examples:

An additional modifier :text can be used to specify a search with advanced text handling (see below) though only a few servers are expected to offer this facility.

When a string search parameter refers to the types HumanName and Address, the search covers the elements of type string, and does not cover elements such as use and period. For robust search, servers should search the parts of a family name independently. E.g. Searching either Carreno or Quinones should match a family name of "Carreno Quinones". HL7 affiliates may make more specific recommendations about how search should work in their specific culture.

It is at the discretion of the server whether to pre-process names, addresses, and contact details to remove separator characters prior to matching in order to ensure more consistent behavior. For example, a server might remove all spaces and - characters from phone numbers. What is most appropriate varies depending on culture and context. A server may also use a free-text style searches on this property to achieve the best results When searching whole names and addresses (not parts), servers may also use flexible match or a free-text style searches on names to achieve the best results.

3.1.1.4.9 uri

The uri parameter refers to a URI (RFC 3986 ) element. Matches are precise (e.g. case, accent, and escape) sensitive, and the entire URI must match. The modifier :above or :below can be used to indicate that partial matching is used. For example:

 GET [base]/ValueSet?url=http://acme.org/fhir/ValueSet/123
 GET [base]/ValueSet?url:below=http://acme.org/fhir/
 GET [base]/ValueSet?url:above=http://acme.org/fhir/ValueSet/123/_history/5
 GET [base]/ValueSet?url=urn:oid:1.2.3.4.5

• The first line is a request to find any value set with the exact url "http://acme.org/fhir/ValueSet/123"
• The second line performs a search that will return any value sets that have a URL that starts with "http://acme.org/fhir/"
• The third line shows the converse - search for any value set above a given specific URL. This will match on any value set with the specified URL, but also on http://acme.org/ValueSet/123. Note that there are not many use cases where :above is useful as compared to the :below search
• The fourth line shows an example of searching by an OID. Note that the :above and :below modifiers only apply to URLs, and not URNS such as OIDs

Note that for uri parameters that refer to Canonical URLs, servers SHOULD support searching by Canonical URL, and SHOULD support automatically detecting a |[version] portion as part of the Canonical URL, and interpreting that portion as a search on the version.

3.1.1.4.10 token

A token type is a parameter that provides an close to exact match search on a string of characters, potentially scoped by a URI. It is mostly used against a code or identifier data type where the value may have a URI that scopes its meaning, where the search is performed against the pair from a Coding or an Identifier. Tokens are also used against other fields where exact matches are required - uris, booleans, and ContactPoints. In these cases, the URI portion is not used.

For tokens, matches are literal (e.g. not based on subsumption or other code system features). Match is case sensitive unless the underlying semantics for the context indicate that the token should be interpreted case-insensitively (see, e.g. CodeSystem.caseSensitive). Note that matches on _id are always case sensitive. If the underlying data type is string then the search is not case sensitive.

Note: There are many challenging issues around case senstivity and token searches. Some code systems are case sensitive (e.g. UCUM) while others are known not to be. For many code systems, it's ambiguous. Other kinds of values are also ambiguous. When in doubt, servers SHOULD treat tokens in a case-insensitive manner, on the grounds that including undesired data has less safety implications than excluding desired behavior. Clients SHOULD always use the correct case when possible, and allow for the server to perform case-insensitive matching.

To use subsumption based logic, use the modifiers below, or list all the codes in the hierarchy. The syntax for the value is one of the following:

• [parameter]=[code]: the value of [code] matches a Coding.code or Identifier.value irrespective of the value of the system property
• [parameter]=[system]|[code]: the value of [code] matches a Coding.code or Identifier.value, and the value of [system] matches the system property of the Identifier or Coding
• [parameter]=|[code]: the value of [code] matches a Coding.code or Identifier.value, and the Coding/Identifier has no system property
• [parameter]=[system]|: any element where the value of [system] matches the system property of the Identifier or Coding

Notes:

• The namespace URI and code both must be escaped correctly. If a system is not applicable (e.g. an element of type uri, then just the form [parameter]=[code] is used.
• For token parameters on elements of type ContactPoint, uri, or boolean, the presence of the pipe symbol SHALL not be used - only the [parameter]=[code] form is allowed

Token search parameters are used for the following data types:

Note: The use of token search parameters for boolean fields: the boolean values "true" and "false" are also represented as formal codes in the Special Values code system, which is useful when boolean values need to be represented in a Coding data type. The namespace for these codes is http://hl7.org/fhir/special-values, though there is usually no reason to use this, as a simple true or false is sufficient.

Modifiers:

Most servers will only process value sets that are already known/registered/supported internally. However, servers can elect to accept any valid reference to a value set. Servers may elect to consider concept mappings when testing for subsumption relationships.

Example searches:

 GET [base]/Patient?identifier=http://acme.org/patient|2345

 GET [base]/Patient?gender=male

 GET [base]/Patient?gender:not=male

 GET [base]/Composition?section=48765-2

 GET [base]/Composition?section:not=48765-2

 GET [base]/Patient?active=true

 GET [base]/Condition?code=http://acme.org/conditions/codes|ha125

 GET [base]/Condition?code=ha125

 GET [base]/Condition?code:text=headache

 GET [base]/Condition?code:in=http%3A%2F%2Fsnomed.info%2Fsct%3Ffhir_vs%3Disa%2F126851005

 GET [base]/Condition?code:below=126851005

 GET [base]/Condition?code:in=http://acme.org/fhir/ValueSet/cardiac-conditions

 GET [base]/Patient?identifier:otype=http://hl7.org/fhir/v2/0203|MR|446053

3.1.1.4.11 quantity

A quantity parameter searches on the Quantity data type. The syntax for the value follows the form:

• [parameter]=[prefix][number]|[system]|[code] matches a quantity with the given unit

The prefix is optional, and is as described above, both regarding how precision and comparator/range operators are interpreted. Example searches:

 GET [base]/Observation?value-quantity=5.4|http://unitsofmeasure.org|mg

 GET [base]/Observation?value-quantity=5.4||mg

 GET [base]/Observation?value-quantity=le5.4|http://unitsofmeasure.org|mg

 GET [base]/Observation?value-quantity=ap5.4|http://unitsofmeasure.org|mg

Specifying a system and a code for the search implies that the search is based on a particular code system - usually UCUM , and that a precise (and potentially canonical) match is desired. In this case, it is inappropriate to search on the human display for the unit, which can be is uncontrolled and may unpredictable.

The search processor may choose to perform a search based on canonical units (e.g. any value where the units can be converted to a value in mg in the case above).

3.1.1.4.12 reference

A reference parameter refers to references between resources. For example, find all Conditions where the subject reference is a particular patient, where the patient is selected by name or identifier. The interpretation of a reference parameter is either:

• [parameter]=[id] the logical [id] of a resource using a local reference (i.e. a relative reference)
• [parameter]=[type]/[id] the logical [id] of a resource of a specified type using a local reference (i.e. a relative reference), for when the reference can point to different types of resources (e.g. Observation.subject)
• [parameter]=[url] where the [url] is an absolute URL - a reference to a resource by its absolute location

Note: A relative reference resolving to the same value as a specified absolute URL, or vice versa, qualifies as a match. For example, if the search parameter value is Patient/123, then this will find references like this:

 <patient>
   <reference value="Patient/123"/>
 </patient>

If the server base address is http://example.org/fhir, then the full URL for that reference is http://example.org/fhir/Patient/123, which means that the search term also matches patient references like this:

 <patient>
   <reference value="http://example.org/fhir/Patient/123"/>
 </patient>

In addition, searching for reference=http://example.org/fhir/Patient/123 will also match both references.

Some references are allowed to point to more than one type of resource; e.g. subject : Reference(Patient|Group|Device|..). In these cases, multiple resources may have the same logical identifier. Servers SHOULD reject a search where the logical id refers to more than one matching resource across different types. In order to allow the client to perform a search in these situations the type is specified explicitly:

 GET [base]/Observation?subject=Patient/23

This searches for any observations where the subject refers to the patient resource with the logical identifier "23". A modifier is also defined to to allow the client to be explicit about the intended type:

 GET [base]/Observation?subject:Patient=23

This has the same effect as the previous search. The modifier becomes useful when used with chaining as explained in the next section. Note: The [type] modifier can't be used with a reference to a resource found on another server, since the server would not usually know what type that resource has. However, since these are absolute references, there can be no ambiguity about the type.

In some cases, search parameters are defined with an implicitly limited scope. For example, Observation has an element subject, which is a reference to one of a number of types. This has a matching search parameter subject, which refers to any of the possible types. In addition to this, there is another search parameter patient, which also refers to Observation.subject, but is limited to only include references of type Patient. When using the patient search parameter, there is no need to specify ":Patient" as a modifier, or "Patient/" in the search value, as this must always be true.

References are also allowed to have an identifier. The modifier :identifier allows for searching by the identifier rather than the literal reference:

 GET [base]/Observation?subject:identifier=http://acme.org/fhir/identifier/mrn|123456

This is a search for all observations that reference a patient by a particular patient MRN. When the :identifier modifier is used, the search value works as a token search. The :identifier modifier is not supported on canonical elements since they do not have an identifier separate from the reference itself.

Chaining is not supported when using the :identifier modifier, nor are chaining, includes or reverse includes supported for reference elements that do not have a reference element.

The reference search parameter is mostly used for resource elements of type Reference or canonical. However, it is also be used to search resource elements of type Resource - i.e. where one resource is directly nested within another - see the Bundle search parameters 'message' and 'composition' as an example of this.

Implementation note: References are allowed to be version specific. When searching on version specific references, the following rules apply:

• If a resource has a reference that is version-specific and chaining is performed, the criteria should ideally be evaluated against the version referenced, but most systems will not be capable of this because search is only defined to function against the current version of a resource
• Where a search does not act on the referenced version, search results SHOULD contain a OperationOutcome with a warning that indicates the discrepancy
• If a resource has a reference that is version-specific and _include is performed, the specified version SHOULD be provided.

3.1.1.4.13 Searching Hierarchies

Some references are circular - that is, the reference points to another resource of the same type. When the reference establishes a strict hierarchy, the modifiers :above and :below may be used to search transitively through the hierarchy:

GET [base]/Procedure?location:below=42

This search returns no only all procedures that occurred at location with id 42, but also any procedures that occurred in locations that are part of location with id 42.

GET [base]/MedicationAdministration?encounter:above=21

Returns all medication administrations that happened during encounter with id 21 or during any "parent" encounter of that encounter.

Servers indicate that :above/:below is supported on a search parameter by defining them as Modifiers on the Search Parameter definition.

3.1.1.4.14 Chained parameters

In order to save a client from performing a series of search operations, reference parameters may be "chained" by appending them with a period (.) followed by the name of a search parameter defined for the target resource. This can be done recursively, following a logical path through a graph of related resources, separated by .. For instance, given that the resource DiagnosticReport has a search parameter named subject, which is usually a reference to a Patient resource, and the Patient resource includes a parameter name which searches on patient name, then the search

 GET [base]/DiagnosticReport?subject.name=peter

is a request to return all the lab reports that have a subject whose name includes "peter". Because the Diagnostic Report subject can be one of a set of different resources, it's necessary to limit the search to a particular type:

 GET [base]/DiagnosticReport?subject:Patient.name=peter

This request returns all the lab reports that have a subject which is a patient, whose name includes "peter".

Note that chained parameters are applied independently to the target resource. For example,

GET Patient?general-practitioner.name=Joe&general-practitioner.address-state=MN

may return Patients cared for by Joe from CA and Jane from MN: no one practitioner need satisfy both conditions. E.g. the chains are evaluated separately. For use cases where the joins must be evaluated in groups, there are either Composite search parameters, or the _filter parameter.

Advanced Search Note: Where a chained parameter searches a resource reference that may have more than one type of resource as its target, the parameter chain may end up referring to search parameters with the same name on more than one kind of resource at once. Servers SHOULD reject a search where the logical id refers to more than one matching resource across different types. For example, the client has to specify the type explicitly using the syntax in the second example above.

3.1.1.4.15 Reverse Chaining

The _has parameter provides limited support for reverse chaining - that is, selecting resources based on the properties of resources that refer to them (instead of chaining, above, where resources can be selected based on the properties of resources that they refer to). Here is an example of the _has parameter:

GET [base]/Patient?_has:Observation:patient:code=1234-5

This requests the server to return Patient resources, where the patient resource is referred to by at least one Observation where the observation has a code of 1234, and where the Observation refers to the patient resource in the patient search parameter.

"Or" searches are allowed (e.g. GET [base]/Patient?_has:Observation:patient:code=123,456), and multiple _has parameters are allowed (e.g. GET [base]/Patient?_has:Observation:patient:code=123&_has:Observation:patient:code=456). Note that each _has parameter is processed independently of other _has parameters.

The _has parameter can be chained, like this:

GET [base]/Patient?_has:Observation:patient:_has:AuditEvent:entity:user=MyUserId

Fetch all the patients that have an Observation where the observation has an audit event from a specific user.

3.1.1.4.16 Composite Search Parameters

Composite search parameters support joining single values with a $. For example, the result of the search operation is the intersection of the resources that match the criteria specified by each individual search parameter. If a parameter repeats, such as /Patient?language=FR&language=NL, then this matches a patient who speaks both languages. This is known as an AND search parameter, since the server is expected to respond only with results which match both values.

If, instead, the search is to find patients that speak either language, then this is a single parameter with multiple values, separated by a ,. For example, /Patient?language=FR,NL. This is known as an OR search parameter, since the server is expected to respond with results which match either value. Every search parameter may be used with comma-separated values in this fashion; this includes the use of search parameters with modifiers, such as `?code:text=this,that.

AND parameters and OR parameters may also be combined, for example: /Patient?language=FR,NL&language=EN would refer to any patient who speaks English, as well as either French or Dutch.

This approach allows for simple combinations of and/or values, but doesn't allow a search based on a pair of values, such as all observations with a sodium value >150 mmol/L (particularly as the end criteria of a chained search), or searching on Group.characteristic where you need find a combination of key/value, not an intersection of separate matches on key and value. Another example is spatial coordinates when doing geographical searches.

To allow these searches, a resource may also specify composite parameters that take sequences of single values that match other defined parameters as an argument. The matching parameter of each component in such a sequence is documented in the definition of the parameter. These sequences are formed by joining the single values with a $. Note: This sequence is a single value and itself can be composed into a set of values, so that, for example, multiple matching state-on-date parameters can be specified as state-on-date=new$2013-05-04,active$2013-05-05.

Note: Modifiers are not used on composite parameters.

Examples of using composite parameters:

 GET [base]/DiagnosticReport?result.code-value-quantity=http://loinc.org|2823-3$gt5.4|http://unitsofmeasure.org|mmol/L

 GET [base]/Observation?component-code-value-quantity=http://loinc.org|8480-6$lt60

 GET [base]/Group?characteristic-value=gender$mixed

3.1.1.4.17 Handling Missing Data

Consider the case of searching for all AllergyIntolerance resources:

GET [base]/AllergyIntolerance?clinical-status=active

This search will only return resources that have a value for clinicalStatus:

{
  "resourceType" : "AllergyIntolerance",
  "clinicalStatus" : "active"
}

Resources missing a clinicalStatus will not be returned. This is probably unsafe - it would not usually be appropriate to ignore AllergyIntolerance warnings with an unknown clinical status, and only return resources with an explicit clinicalStatus. Instead, it might be desired to return AllergyIntolerance resources with either an explicit value for clinicalStatus, or none:

GET [base]/AllergyIntolerance?clinical-status=active
GET [base]/AllergyIntolerance?clinical-status:missing=true

Note that this is 2 separate queries. They can be combined in a batch, but not in a single operation. This query will always return an empty list, as no resource can satisfy both criteria at once:

GET [base]/AllergyIntolerance?clinical-status=active&clinical-status:missing=true

There is no way to use the :missing modifier and mix with a value using the comma syntax documented above for composite search parameters.

An alternative approach is to use the _filter parameter, for servers that support this parameter.

3.1.1.4.18 Escaping Search Parameters

In the rules described above, special rules are defined for the characters $, ,, and |. As a consequence, if these characters appear in an actual parameter value, they must be differentiated from their use as separator characters. When any of these characters appear in an actual parameter value, they must be prepended by the character \, which also must be used to prepend itself. Therefore, param=xxx$xxx indicates that it is a composite parameter, while param=xx\$xx indicates that the parameter has the literal value xx$xx. The parameter value xx\xx is illegal, and the parameter value param=xx\\xx indicates a literal value of xx\xx.

This specification defines this additional form of escape for a reason. The classic %xx escaping which is part of normal HTTP URLs ensures that the character appears at the FHIR server correctly, while the , versus \ becomes important once it has reached the server and the query is parsed. Therefore:

GET [base]/ValueSet?url=http://acme.org/fhir/ValueSet/123,http://acme.org/fhir/ValueSet/124%2CValueSet/125

uses url escaping to make sure the FHIR server received:

GET [base]/ValueSet?url=http://acme.org/fhir/ValueSet/123,http://acme.org/fhir/ValueSet/124,125

This request will compare the URL against three values: the last one being a relative and incorrect url, which is likely not the actual intent. However:

GET [base]/ValueSet?url=http://acme.org/fhir/ValueSet/123,http://acme.org/fhir/ValueSet/124\,125

is equivalent to:

GET [base]/ValueSet?url=http://acme.org/fhir/ValueSet/123,http://acme.org/fhir/ValueSet/124\%2C125

which would mean: url = http://.....123 OR http://....124,125.

3.1.1.4.19 Text Search Parameters

The special text search parameters, _text and _content, search on the narrative of the resource, and the entire content of the resource respectively. These parameters SHOULD support a sophisticated search functionality of the type offered by typical text indexing services. The value of the parameter is a text-based search, which may involve searching multiple words with thesaurus and proximity considerations, and logical operations such as AND, OR etc. For example:

 GET [base]/Condition?_text=(bone OR liver) and metastases

This request returns all Condition resources with the word "metastases" and either "bone" or "liver" in the narrative. The server MAY choose to search for related words as well.

STU Note: The issues around standardizing text search are not fully resolved. During the trial use period for this specification, we recommend that systems use the rules specified by the OData specification for the $search parameter . Typical implementations would use Lucene, an sql-based full text search, or some indexing service.

Feedback is welcome here .

3.1.1.4.20 Searching by list

The _list parameter allows for the retrieval of resources that are referenced by a List resource.

 GET [base]/Patient?_list=42

This request returns all Patient resources that are referenced from the list found at [base]/List/42) in List.entry.item. While it is possible to retrieve the list, and then iterate the entries in the list fetching each patient, using a list as a search criteria allows for additional search criteria to be specified. For instance:

 GET [base]/Patient?_list=42&gender=female

This request will return all female patients in the list. The server can return the list referred to in the search parameter as an included resource, but is not required to do so. In addition, a system can support searching by lists by their logical function. For example:

 GET [base]/AllergyIntolerance?patient=42&_list=$current-allergies

This request will return all allergies in patient 42's "Current Allergy List". The server returns all relevant AllergyIntolerance resources, and can also choose to return the list. For further information, refer to the definition of "$current-allergies", and the List Operation "Find". Note: Servers are not required to make these lists available to the clients as list resources, but may choose to do so.

3.1.1.4.21 Advanced filtering

The search mechanism described above is flexible, and easy to implement for simple cases, but is limited in its ability to express combination queries. To complement this mechanism, the "_filter" search expression parameter can be used.

For example, "Find all the observations for patient with a name including peter that have a LOINC code 1234-5":

GET [base]/Observation?code=http://loinc.org|1234-5&subject.name=peter

Using the _filter parameter, the search would be expressed like this:

GET [base]/Observation?_filter=name eq http://loinc.org|1234-5 and subject.name co "peter"

The _filter parameter is described in detail on the "_Filter Parameter" page.

3.1.1.4.22 Specifying the type of Resource

Normally, a search is initiated against a known type of resource, e.g.

GET [base]/Observation?params...

However, in some circumstances, a search is executed where there is no fixed type of resource:

• Using search across all resource types (GET [base]?params...)
• Using search with messaging
• Some search specifications inside other services e.g. decision support usage

In these circumstances, the search criteria may need to specify one or more resource types that the search applies to. This can be done by using the _type parameter:

GET [base]/?_type=Observation,Condition&other params...

Note that the only search parameters that be can be used in global search like this are the base parameters that apply to all resources. In other contexts, searches on multiple types may allow resource specific search parameters, but implementation experience will be required to determine the correct behavior in these cases.

Technically, the _type parameter is a token parameter on the Resource Types Value Set.

3.1.1.5 Managing Returned Resources

3.1.1.5.1 Sorting

The client can indicate which order to return the results by using the parameter _sort, which can contains a comma-separated list of sort rules in priority order:

GET [base]/Observation?_sort=status,-date,category

Each item in the comma separated list is a search parameter, optionally with a '-' prefix. The prefix indicates decreasing order; in its absence, the parameter is applied in increasing order.

Notes:

• When sorting, the actual sort value used is not returned explicitly by the server for each resource, just the resource contents.
• To sort by relevance, use _score.
• The server returns the sort it performs as part of the returned search parameters (see below).
• A search parameter can refer to an element that repeats, and therefore there can be multiple values for a given search parameter for a single resource. In this case, the sort is based on the item in the set of multiple parameters that comes earliest in the specified sort order when ordering the returned resources.
• When sorting on string search parameters, sorting SHOULD be performed on a case-insensitive basis. Accents may either be ignored or sorted as per realm convention.
• This specification does not specify exacts rules for consistency of sorting across servers. In general, this is deemed to be not as essential as consistency of filtering (though even that is a little variable). The purpose of sorting is to provide data in a "reasonable" order for end-users. "Reasonable" may vary by use case and realm, particularly for accented characters.

3.1.1.5.2 Page Count

In order to keep the load on clients, servers and the network minimized, the server may choose to return the results in a series of pages. The search result set contains the URLs that the client uses to request additional pages from the search set. For a simple RESTful search, the page links are contained in the returned bundle as links.

Typically, a server will provide its own parameters in the links that it uses to manage the state of the search as pages are retrieved. These parameters do not need to be understood or processed by the client.

The parameter _count is defined as a hint to the server regarding how many resources should be returned in a single page. Servers SHALL NOT return more resources than requested, even if they don't support paging, but are allowed to return less than the client requested. The server should repeat the original _count parameter in its returned page links so that subsequent paging requests honor the original _count. Note: It is at the discretion of the search engine as to how to handle ongoing updates to the resources while the search is proceeding.

Note: The combination of _sort and _count can be used to return only the latest resource that meets a particular criteria - set the criteria, and then sort by date in descending order, with _count=1. This way, the last matching resource will be returned.

if _count has the value 0, this shall be treated the same as _summary=count: the server returns a bundle that reports the total number of resources that match in Bundle.total, but with no entries, and no prev/next/last links. Note that the Bundle.total only include the total number of matching resources. It does not count extra resources such as OperationOutcome or included resources that may also be returned.

3.1.1.5.3 Including other resources in result (_include and _revinclude)

Clients may request that the engine return resources related to the search results, in order to reduce the overall network delay of repeated retrievals of related resources. This is useful when the client is searching on a clinical resource, but for every such resource returned, the client will also need the subject (patient) resource that the clinical resource refers to. The client can use the _include parameter to indicate that the subject resources be included in the results. An alternative scenario is where the client wishes to fetch a particular resource, and any resources that refer to it. For example, the client may wish to fetch a MedicationRequest, and any provenance resources that refer to the prescription. This is known as a reverse include, and is specified by providing a _revinclude parameter.

Both _include and _revinclude are based on search parameters, rather than paths in the resource, since joins, such as chaining, are already done by search parameter.

Each _include parameter specifies a search parameter to join on:

 GET [base]/MedicationRequest?_include=MedicationRequest:patient
 GET [base]/MedicationRequest?_revinclude=Provenance:target

The first search requests all matching MedicationRequests, to include any patient that the medication prescriptions in the result set refer to. The second search requests all matching prescriptions, return all the provenance resources that refer to them.

Parameter values for both _include and _revinclude have three parts, separated by a : character:

1. The name of the source resource from which the join comes
2. The name of the search parameter which must be of type reference
3. (Optional) A specific of type of target resource (for when the search parameter refers to multiple possible target types)

_include and _revinclude parameters do not include multiple values. Instead, the parameters are repeated for each different include criteria.

For each returned resource, the server identifies the resources that meet the criteria expressed in the join, and adds to the results, with the entry.search.mode set to "include" (in some searches, it is not obvious which resources are matches, and which are includes). If there is no reference, or no matching resource, the resource cannot be retrieved (e.g. on a different server), then the resource is omitted, and no error is returned.

The inclusion process can be recursive, if the modifier :recurse is included. For example, this search returns all Medication Request resources and their prescribing Practitioner Resources for the matching Medication Dispense resources:

GET [base]/MedicationDispense?_include=MedicationDispense:authorizingPrescription
    &_include:recurse=MedicationRequest:prescriber&criteria...

This technique applies to circular relationships as well. For example, the first of these two searches includes any related observations to the target relationships, but only those directly related. The second search asks for the _include based on related parameter to be executed recursively, so it will retrieve observations that are directly related, and also any related observations to any other included observation.

GET [base]/Observation?_include=Observation:related-target&criteria...
GET [base]/Observation?_include:recurse=Observation:related-target&criteria...

Both _include and _revinclude use the wild card "*" for the search parameter name, indicating that any search parameter of type=reference be included. Though both clients and servers need to take care not to request or return too many resources when doing this. Most notably, using recursive inclusions might lead to the retrieval of the full patient's record, or even more: resources are organized into an interlinked network and broad _include paths may eventually traverse all possible paths on the server. For servers, these recursive and wildcard _includes are demanding and may slow the search response time significantly.

It is at the server's discretion how deep to recursively evaluate the inclusions. Servers are expected to limit the number of iterations done to an appropriate level and are not obliged to honor requests to include additional resources in the search results.

When search results are paged, each page of search results should include the matching includes for the resources in each page, so that each page stands alone as a coherent package.

3.1.1.5.4 Contained Resources

By default, search results only include resources that are not contained in other resources. A chained condition will be evaluated inside contained resources. To illustrate this, consider a MedicationRequest resource that has a contained Medication resource specifying a custom formulation that has ingredient with a itemCodeableConcept "abc" in "http://acme.com./medications". In this case, a search:

GET MedicationRequest?medication.ingredient-code=abc

will include the MedicationRequest resource in the results. However, this search:

GET Medication?ingredient-code=abc

will not include the contained Medication resource in the results, since either the wrong type of resource would be returned, or the contained resource would be returned without its container resource, which provides context to the contained resource.

Clients are able to modify this behavior using the _contained parameter, which can have one of the following values:

• false (default): Do not return contained resources
• true: return only contained resources
• both: return both contained and non-contained (normal) resources

When contained resources are being returned, the server should return either the container resource, or the contained resource alone. The client can specify which by using the _containedType parameter, which can have one of the following values:

• container (default): Return the container resources
• contained: return only the contained resource

When returning a container resource, the server simply puts this in the search results:

<Bundle>
  ...
  <entry>
    <resource>
      <MedicationRequest>
        <id value="23">
        ....
        <contained>
          <Medication>
            <id value="m1">
            ...
          </Medication>
        <contained>

      </MedicationRequest>
    </resource>
    <search>
      <mode value="match"/>
    </search>
  </entry>
</Bundle>

In the case of returning container resources, the server SHALL populate the entry.search.mode element, as shown, so that the client can pick apart matches and includes (since the usual approach of doing it by type might not work).

If the return type is the contained resource, this must be done slightly differently:

<Bundle>
  ...
  <entry>
    <fullUrl value="http://example.com/fhir/MedicationRequest/23#m1"/>
    <resource>
      <Medication>
        <id value="m1">
        ...
      </Medication>
    </resource>
    <search>
      <mode value="match"/>
    </search>
  </entry>
</Bundle>

In this case, the fullUrl informs the client that this is a contained resource, along with indicating the identity of the containing resource.

3.1.1.5.5 External References

If the _include path selects a reference that refers to a resource on another server, the server can elect to include that resource in the search results for the convenience of the client.

If the _include path selects a reference that refers to an entity that is not a Resource, such as an image attachment, the server may also elect to include this in the returned results as a Binary resource. For example, the include path may point to an attachment which is by reference, like this:

 <content>
   <contentType>image/jpeg</contentType>
   <url>http://example.org/images/2343434/234234.jpg</url>
 </content>

The server can retrieve the target of this reference, and add it to the results for the convenience of the client.

3.1.1.5.6 Paging

When returning paged results for a search with _include resources, all _include resources that are related to the primary resources returned for the page SHOULD also be returned as part of that same page, even if some of those resource instances have previously been returned on previous pages. This approach allows both sender and receiver to avoid caching results of other pages.

3.1.1.5.7 Summary

The client can request the server to return only a portion of the resources by using the parameter _summary:

   GET [base]/ValueSet?_summary=true

The _summary parameter requests the server to return a subset of the resource. It can contain one of the following values:

The intent of the _summary parameter is to reduce the total processing load on server, client, and resources between them such as the network. It is most useful for resources that are large, particularly ones that include images or elements that may repeat many times. The purpose of the summary form is to allow a client to quickly retrieve a large set of resources, and let a user pick the appropriate one. The summary for an element is defined to allow a user to quickly sort and filter the resources, and typically omit important content on the basis that the entire resource will be retrieved when the user selects a resource.

Servers are not obliged to return just a summary as requested. There are only a limited number of summary forms defined for resources in order to allow servers to store the summarized form(s) in advance. Servers SHOULD mark the resources with the tag SUBSETTED to ensure that the incomplete resource is not acidentally used to overwrite a complete resource.

Note that the _include and _revinclude parameters cannot be mixed with _summary=text.

STU Note: There are open issues around the definitions of which elements are in the summary for each resource. There are 2 kinds of problems in the existing definitions:

• Elements are marked as 'include in summary', but their parent element is not
• Elements have minimum cardinality > 0, but are not included in the summary (and their parent element is) - so sumarised resources will not be schema valid

These issues will be resolved for FHIR Release 4. In the meantime, implementers may choose to override which elements are marked as 'included in summary', and implementations may vary.

Feedback on which elements should be in the summaries is welcome here .

3.1.1.5.8 Elements

If one of the summary views defined above is not appropriate, a client can request a specific set of elements be returned as part of a resource using the _elements parameter:

   GET [base]/Patient?_elements=identifier,active,link

The _elements parameter consists of a comma-separated list of base element names such as, elements defined at the root level in the resource. Only elements that are listed are to be returned. Clients SHOULD list all mandatory and modifier elements in a resource as part of the list of elements. The list of elements does not apply to included resources.

Servers are not obliged to return just the requested elements. Servers SHOULD always return mandatory elements whether they are requested or not. Servers SHOULD mark the resources with the tag SUBSETTED to ensure that the incomplete resource is not actually used to overwrite a complete resource.

3.1.1.5.9 Relevance

Where a search specifies a non-deterministic sort, the search algorithm may generate some kind of ranking score to indicate which resources meet the specified criteria better than others. The server can return this score in entry.score:

  <entry>
    <score value=".45"/>
    <Patient>
      ... patient data ...
    </Patient>
  </entry>

The score is a decimal number with a value between (and including) 0 and 1, where 1 is best match, and 0 is least match.

3.1.1.6 Server Conformance

In order to allow the client to be confident about what search parameters were used as criteria by the server, the server SHALL return the parameters that were actually used to process the search. Applications processing search results SHALL check these returned values where necessary. For example, if the server did not support some of the filters specified in the search, a client might manually apply those filters to the retrieved result set, display a warning message to the user or take some other action.

In the case of a RESTful search, these parameters are encoded in the self link in the bundle that is returned:

  <link>
    <relation value="self"/>
    <url value="http://example.org/Patient?name=peter"/>
  </link>

In other respects, servers have considerable discretion with regards to supporting search:

• Servers can choose which parameters to support (other than _id above).
• Servers can choose when and where to implement parameter chaining, and when and where they support the _include parameter.
• Servers are able to declare additional parameters in the profiles referenced from their Capability statements. Servers should define search parameters starting with a "-" character to ensure that the names they choose do not clash with future parameters defined by this specification.
• Servers are not required to enforce case sensitivity on parameter names, though the names are case sensitive (and URLs are generally case-sensitive).
• Servers may choose how many results to return, though the client can use _count as above
• Servers can choose how to sort the return results, though they SHOULD honor the _sort parameter.

3.1.1.7 Advanced Search

The search framework described above is a useful framework for providing a simple search based on indexed criteria, but more sophisticated query capability is needed to handle precise queries, complex decision support based requests, and direct queries that have human resolution.

More advanced search operations are specified by the _query parameter:

   GET [base]/Patient?_query=name&parameters...

The _query parameter names a custom search profile that describes a specific query operation. The named query may define additional named parameters that are used with that particular named query. Servers can define their own additional named queries to meet their own uses using an OperationDefinition.

There can only ever be one _query parameter in a set of search parameters. Servers processing search requests SHALL refuse to process a search request if they do not recognize the _query parameter value.

3.1.1.8 Search Result Currency

The results of a search operation are only guaranteed to be current at the moment the operation is executed. After the operation is executed, ongoing actions performed on the resources against which the search was executed will render the results increasingly stale. The significance of this depends on the nature of the search, and the kind of use that is being made of the results.

This is particularly relevant when the server is returning the results in a series of pages. It is at the discretion of the search engine of how to handle ongoing updates to the resources while the search is proceeding.

Note: Performing a search operation does not change the set of resources on the server, with the exception of the creation of Audit Event resources auditing the search itself.

3.1.1.9 Summary Tables

Cross-map between search parameter types and Data types: