This page is part of the FHIR Specification (v1.0.0: DSTU 2 Ballot 3). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

1.8.1 FHIR Overview - Developers

FHIR Infrastructure Work Group

Maturity Level: N/A

Ballot Status: DSTU 2

FHIR (Fast Health Interoperability Resources) is designed to enable the information exchange that supports the provision of healthcare in a wide variety of processes. The specification builds on and adapts standard industry RESTful practices to enable the provision of integrated healthcare across a wide range of teams.

The intended scope of FHIR is broad, covering human and veterinary, clinical care, public health, clinical trials, administration and financial aspects. The standard is intended for global use in a wide variety of architectures and scenarios.

1.8.1.1 Framework

FHIR is based on "Resources" which are the common building block for all exchanges. Each resource has the following common features:

• A URL that identifies it
• Common metadata
• A human-readable XHTML summary
• A set of defined common data elements
• An extensibility framework to support variation in healthcare

Resources are represented as either XML or JSON. There are currently 93 different resource types defined in the FHIR specification.

1.8.1.2 Example Resource

This is an example of how a patient is represented as a FHIR object in JSON. An XML encoding is also defined in the specification.

{
  "resourceType": "Patient",
  "id" : "23434",
  "meta" : {
    "versionId" : "12",
    "lastUpdated" : "2014-08-18T15:43:30Z"
  }
  "text": {
    "status": "generated",
    "div": "<!-- Snipped for Brevity -->"
  },
  "extension": [
    {
      "url": "http://example.org/consent#trials",
      "valueCode": "renal"
    }
  ],
  "identifier": [
    {
      "use": "usual",
      "label": "MRN",
      "system": "http://www.goodhealth.org/identifiers/mrn",
      "value": "123456"
    }
  ],
  "name": [
    {
      "family": [
        "Levin"
      ],
      "given": [
        "Henry"
      ],
      "suffix": [
        "The 7th"
      ]
    }
  ],
  "gender": {
    "text": "Male"
  },
  "birthDate": "1932-09-24",
  "active": true
}

Each resource consists of:

• resourceType (line 2) - Required: FHIR defines many different types of resources. See the full index
• id (line 3) - The id of the resource. Always present when a resource is exchanged, except during the create operation (below)
• meta (lines 4 - 7) - Usually Present: Common use/context data to all resources and managed by the infrastructure. Missing if there is no metadata
• text (lines 12 - 17) - Recommended: XHTML that provides a human readable representation for the resource
• extension (lines 12 - 17) - Optional: Extensions defined by the extensibility framework
• data (lines 18 - 43) - Optional: data elements defined for each type of resource

Note that though this specification always shows the JSON properties in the order they are defined, many JSON libraries order properties by other criteria.

1.8.1.3 Interactions

For manipulation of resources, FHIR provides a REST API with a rich but simple set of interactions:

• Create = POST https://example.com/path/{resourceType}
• Read = GET https://example.com/path/{resourceType}/{id}
• Update = PUT https://example.com/path/{resourceType}/{id}
• Delete = DELETE https://example.com/path/{resourceType}/{id}
• Search = GET https://example.com/path/{resourceType}?search parameters...
• History = GET https://example.com/path/{resourceType}/{id}/_history
• Transaction = POST https://example.com/path/ (POST a tranasction bundle to the system)
• Operation = GET https://example.com/path/{resourceType}/{id}/${opname}

The FHIR specification describes other kinds of exchanges beyond this simple RESTful API, including exchange of groups of resources as Documents, Messages, and by using other kinds of services.

1.8.1.4 Managing Variability

One feature of the healthcare industry is that there is a wide variation between different jurisdictions and sections of the industry, and no central authority to impose common business practices. Because of this, the FHIR specification defines a common extension framework, and defines a framework for managing variability.

Another key aspect of the variability encountered in healthcare is that the same infomration different is be represented at different levels of detail, granularity and nesting by different parties across the system. For instance, a blood pressure measure is just a simple observation, a vital sign measure, or can be thought of a rich set of highly controlled data that includes things like controlled vocabularies for posture, exercise etc. The resources defined in this specification focus on the general, common use cases. Richer and more specific content can be standardised by defining "profiles" on the base resources.

1.8.1.5 Creating a resource

To create a resource, send an HTTP POST request to the resource's respective end point.

 
  POST https://example.com/path/{resourceType}

In the example below we see the creation of a Patient.

POST {some base path}/Patient HTTP/1.1
Authorization: Bearer 37CC0B0E-C15B-4578-9AC1-D83DCED2B2F9
Accept: application/json+fhir
Content-Type: application/json+fhir
Content-Length: 1198
 
{
  "resourceType": "Patient",
  ...
}

Submit a new patient to the server, and ask it to store the patient with an id of its own choice. Notes:

• /Patient (line 1) - the manager for all patients - use the name of the type of resource
• Authorization (line 2) - see Security for FHIR
• Accept, Content-Type (lines 3-4) - the content type for all FHIR resources as represented in JSON (or application/xml+fhir for the XML version). FHIR resources are always represented in UTF-8
• id (line 9) - No id for a resource that is being created - the server will assign one
• Resource Content, lines 8+ - There's no meta property at this point. The rest of the resource is the same content as above

1.8.1.6 Create Response

A response contains an HTTP code 201 to indicate that the Resource has been created successfully. A location header indicates where the resource can be fetched in subsequent requests. The server may choose to return an OperationOutcome resource, but is not required to do so.

HTTP/1.1 201 Created
Content-Length: 161
Content-Type: application/json+fhir
Date: Mon, 18 Aug 2014 01:43:30 GMT
ETag: "1"
Location: http://example.com/Patient/347
 
{
  "resourceType": "OperationOutcome",
  "text": {
    "status": "generated",
    "div": "<div xmlns=\"http://www.w3.org/1999/xhtml\">The operation was successful</div>"
  }
}

Notes:

• HTTP/1.1 201 (line 1) - the operation was successful. Note that HTTP/1.1 is strongly recommended but not required
• ETag (line 5) - used in the version aware update pattern
• Location (line 6) - the id the server assigned to the resource. The id in the url must match the id in the resource when it is subsequently returned
• operationOutcome (line 9) - OperationOutcome resources in this context have no id or meta element (they have no managed identity)

1.8.1.6.1 Error response

For a variety of reasons, servers may need to return an error. Clients should be alert to authentication related responses, but FHIR content related errors should be returned using an appropriate HTTP status code, with an OperationOutcome resource to provide additional information. Here is an example of a server rejecting a resource because of server defined business rules:

HTTP/1.1 422 Unprocessable Entity
Content-Length: 161
Content-Type: application/json+fhir
Date: Mon, 18 Aug 2014 01:43:30 GMT
 
{
  "resourceType": "OperationOutcome",
  "text": {
    "status": "generated",
    "div": "<div xmlns=\"http://www.w3.org/1999/xhtml\">MRN conflict
   - the MRN 123456 is already assigned to a different patient</div>"
  },
}

Notes:

• The server can return additional structured information using the details of the OperationOutcome

1.8.1.7 Read Request

Reading a resource is done by sending HTTP GET requests to the desired Resource end point.

 
  GET https://example.com/path/{resourceType}/{id}

Here's an example.

GET /Patient/347?_format=xml HTTP/1.1
Host: example.com
Accept: application/xml+fhir
Cache-Control: no-cache

Notes:

• 347 (line 1) - The id of the resource that is being fetched
• _format=xml (line 1) - this is another method for clients to indicate the desired response format, in addition to using the accept header, and is useful for clients that don't have access to the HTTP Headers (e.g. XSLT transforms) (see Mime Types)
• cache control (line 4) - Concurrency control is important, though FHIR itself says nothing about it - see http://www.w3.org/Protocols/rfc2616/rfc2616-sec13.html or https://www.mnot.net/cache_docs/

1.8.1.8 Read Response

The response to a GET contains the Resource.

HTTP/1.1 200 OK
Content-Length: 729
Content-Type: application/xml+fhir
Last-Modified: Sun, 17 Aug 2014 15:43:30 GMT
ETag: "1"
 
<?xml version="1.0" encoding="UTF-8"?>
<Patient xmlns="http://hl7.org/fhir">
  <id value="347"/>
  <meta>
    <versionId value="1"/>
    <lastUpdated value="2014-08-17T15:43:30Z"/>
  </meta>
  <!-- content as shown above for patient -->  
</Patient>

Notes:

• id (line 9) - The id of the resource. This must match the id in the read request
• versionId (line 11) - The current version id of the resource. Best practice is that this value matches the ETag (see version aware update), but clients must never assume this. Note that some servers do not track the version of the resource
• Note that servers are not required to support versioning, but are strongly encouraged to do so
• lastUpdated (line 12) - if present, this must match the value in the HTTP header

1.8.1.9 Search Request

In addition to getting single known resources it is possible to find resources by searching the resource end point with a set of criteria describing the set of resources that should be retrieved and their order. The general pattern is:

  GET https://example.com/path/{resourceType}?criteria

The criteria is a set of http parameters that specify which resources to return. The search operation

https://example.com/base/MedicationOrder?patient=347

returns all the prescriptions for the patient created above.

1.8.1.10 Search Response

The response to a search request is a bundle: list of matching resources with some metadata:

HTTP/1.1 200 OK
Content-Length: 14523
Content-Type: application/xml+fhir
Last-Modified: Sun, 17 Aug 2014 15:49:30 GMT
 
{
  "resourceType": "Bundle",
  "type": "searchset",
  "id" : "eceb4882-5c7e-4ca4-af62-995dfb8cef01"
  "meta" : {
    "lastUpdated" : "2014-08-19T15:49:30Z"
  },
  "total": "3",
  "link": [
    {
      "relation" : "next",
      "url" : "https://example.com/base/MedicationOrder?patient=347&searchId=ff15fd40-ff71-4b48-b366-09c706bed9d0&page=2"
    }, {
      "relation" : "self",
      "url" : "https://example.com/base/MedicationOrder?patient=347"
    }
  ],
  "entry": [
    {
      "resource" : {
        "resourceType": "MedicationOrder",
        "id" : "3123",
        "meta" : {
          "versionId" : "1",
          "lastUpdated" : "2014-08-16T05:31:17Z"
        }, 
        ... content of resource ...
      }, 
    }, 
    ... 2 additional resources ....
  ]
}

Notes:

• resourceType/type (line 7/8) - the result of a search is always a bundle of type "searchset"
• id (line 9) - An identifier assigned to this particular bundle. The server should assign a unique id to this bundle that it will not be re-used
• meta.lastUpdated (line 11) - This should match the HTTP header, and should be the date the search was executed, or more recent, depending on how the server handles ongoing updates. The lastUpdated data SHALL be the same or more recent than the most recent resource in the results
• total (line 14) - The total number of matches in the search results. Not the number of matches in this particular bundle, which may be a paged view into the results
• link (line 15) - A set of named links that give related contexts to this bundle. Names defined in this specification: first, prev, next, last, self
• entry (line 24) - An actual resources in this set of results
• entry.resource.id (line 27) - Note that in some bundles, the must be unique in the bundle
• In addition, the search operation is also able to return additional related resources as well

1.8.1.11 Update Request

The client sends the server a new version of the resource to replace the existing version - it PUTs it to the location of the existing resource:

 
  PUT https://example.com/path/{resourceType}/{id}

Note that there does not need to be a resource already existing at {id} - the server may elect to automatically create the resource at the specified address. Here is an example of updating a patient:

PUT /Patient/347 HTTP/1.1
Host: example.com
Content-Type: application/json+fhir
Content-Length: 1435
Accept: application/json+fhir
If-Match: 1
 
{
  "resourceType": "Patient",
  "id" : "347",
  "meta" : {
    "versionId" : "1",
    "lastUpdated" : "2014-08-18T15:43:30Z"    
  },
  ...
}

Notes:

• resourceType (line 1) - "Patient" in the url must match the resource type in the resource (line 9)
• resource id (line 1, "347") - This must match the id in the resource (line 10)
• If-Match (line 6) - if this is provided, it must match the value in meta.versionId (line 12), and the server must check the version integrity, or return 412 if it doesn't support versions
• meta.lastUpdated (line 10) - This value is ignored, and will be updated by the server
• resource content (line 14) - Not shown here, the same as Patient above

1.8.1.12 Update Response

The response to an update request has metadata / status, and optionally an OperationOutcome:

HTTP/1.1 200 OK
Content-Length: 161
Content-Type: application/json+fhir
Date: Mon, 18 Aug 2014 01:43:30 GMT
ETag: "2"
 
{
  "resourceType": "OperationOutcome",
  "text": {
    "status": "generated",
    "div": "<div xmlns=\"http://www.w3.org/1999/xhtml\">The operation was successful</div>"
  }
}

Notes:

• ETag (line 5) - This is the versionId of the new version, and is also found as a fixed URL in line 6

1.8.1.13 Base Resource Content

Here is an example that shows all the information found in all resources, fully populated:

{
  "resourceType" : "X",
  "id" : "12",
  "meta" : {
    "versionId" : "12",
    "lastUpdated" : "2014-08-18T15:43:30Z",
    "profile" : ["http://example-consortium.org/fhir/profile/patient"],
    "security" : [{
      "system" : "http://hl7.org/fhir/v3/ActCode",
      "code" : "EMP"
    }],
    "tag" : [{
      "system" : "http://example.com/codes/workflow",
      "code" : "needs-review"
    }]
  },
  "implicitRules" : "http://example-consortium.org/fhir/ehr-plugins",
  "language" : "X"
}

Implementers notes:

• resourceType (line 2) - always found in every resource. In XML, this is the name of the root element for the resource
• id (line 3) - defined when the resource is created, and never changed. Only missing when the resource is first created
• meta.versionId (line 5) - changes each time any resource contents change (except for the last 3 elements in meta)
• meta.lastUpdated (line 6) - Changes when the versionId changes. Systems that don't support versions usually don't track lastUpdated either
• meta.profile (line 7) - An assertion that the content conforms to a profile. See Extending and Restricting Resources for further discussion. Can be changed as profiles and value sets change or the system rechecks conformance
• meta.security (lines 8 - 11) - Security labels applied to this resource. These tags connect resources in specific ways to the overall security policy and infrastructure. Security tags can be updated when the resource changes, or whenever the security sub-system chooses to
• meta.tag (lines 12 - 16) - Tags applied to this resource. Tags are used to relate resources to process and workflow. Applications are not required to consider the tags when interpreting the meaning of a resource. Tags can be updated without changing the resource version
• implicitRules (line 17) - indicates that there is a custom agreement about how the resources are used that must be understood in order to safely process the resource. Use of this is discouraged because it restricts sharing, but sometimes necessary
• language (line 18) - The base language of the resource. The resource is allowed to have content from other languages; this is just the base, but should be the main language of the resource

Want more information?

• Resource Index
• Resource Guide
• Implementation Home
• Documentation Index
• Support Links