DSTU2 QA Preview

This page is part of the FHIR Specification (v1.0.0: DSTU 2 Ballot 3). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R5 R4B R4 R3 R2

5.12 Resource DeviceMetric - Content

Health Care Devices Work GroupMaturity Level: 0Compartments: Device

Describes a measurement, calculation or setting capability of a medical device.

5.12.1 Scope and Usage

The DeviceMetric resource describes mandatory static properties that characterize a direct or derived, quantitative or qualitative biosignal measurement, setting, or calculation produced by a medical device. The DeviceMetric resource can also be used to describe the non-static but highly relevant properties to the metric such as metric status, metric last calibration time and type, measurement mode, color, reference link to the parent DeviceComponent to where it belongs, and any capabilities that the metric offers (for example: setting the metric label).

Note:

For the initial scope, this DeviceMetric resource is only applicable to describe a single metric node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard.

5.12.2 Boundaries and Relationships

There are two related resources

  • Device - The physical device that this DeviceMetric belongs to.
  • DeviceComponent - The DeviceComponent that this DeviceMetric is part of. This can be a DeviceComponent of any kind like a VirtualMedicalDevice, a MedicalDeviceSystem, or a Channel.

This resource is referenced by observation

5.12.3 Resource Content

Structure

NameFlagsCard.TypeDescription & Constraintsdoco
.. DeviceMetric ΣDomainResourceMeasurement, calculation or setting capability of a medical device
... type Σ1..1CodeableConceptType of metric
MetricType (Preferred)
... identifier Σ1..1IdentifierUnique identifier of this DeviceMetric
... unit Σ0..1CodeableConceptUnit of metric
MetricUnit (Preferred)
... source Σ0..1Reference(Device)Describes the link to the source Device
... parent Σ0..1Reference(DeviceComponent)Describes the link to the parent DeviceComponent
... operationalStatus Σ0..1codeon | off | standby
DeviceMetricOperationalStatus (Required)
... color Σ0..1codeblack | red | green | yellow | blue | magenta | cyan | white
DeviceMetricColor (Required)
... category Σ1..1codemeasurement | setting | calculation | unspecified
DeviceMetricCategory (Required)
... measurementPeriod Σ0..1TimingDescribes the measurement repetition time
... calibration Σ0..*BackboneElementDescribes the calibrations that have been performed or that are required to be performed
.... type Σ0..1codeunspecified | offset | gain | two-point
DeviceMetricCalibrationType (Required)
.... state Σ0..1codenot-calibrated | calibration-required | calibrated | unspecified
DeviceMetricCalibrationState (Required)
.... time Σ0..1instantDescribes the time last calibration has been performed

doco Documentation for this format

UML Diagram

DeviceMetric (DomainResource)Describes the type of the metric. For example: Heart Rate, PEEP Setting, etctype : CodeableConcept [1..1] « Describes the metric type (Strength=Preferred)MetricType? »Describes the unique identification of this metric that has been assigned by the device or gateway software. For example: handle ID. It should be noted that in order to make the identifier unique, the system element of the identifier should be set to the unique identifier of the deviceidentifier : Identifier [1..1]Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etcunit : CodeableConcept [0..1] « Describes the unit of the metric (Strength=Preferred)MetricUnit? »Describes the link to the Device that this DeviceMetric belongs to and that contains administrative device information such as manufacture, serial number, etcsource : Reference [0..1] « Device »Describes the link to the DeviceComponent that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a DeviceComponent that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment locationparent : Reference [0..1] « DeviceComponent »Indicates current operational state of the device. For example: On, Off, Standby, etcoperationalStatus : code [0..1] « Describes the operational status of the DeviceMetric (Strength=Required)DeviceMetricOperationalStatus! »Describes the color representation for the metric. This is often used to aid clinicians to track and identify parameter types by color. In practice, consider a Patient Monitor that has ECG/HR and Pleth for example; the parameters are displayed in different characteristic colors, such as HR-blue, BP-green, and PR and SpO2- magentacolor : code [0..1] « Describes the typical color of representation (Strength=Required)DeviceMetricColor! »Indicates the category of the observation generation process. A DeviceMetric can be for example a setting, measurement, or calculationcategory : code [1..1] « Describes the category of the metric (Strength=Required)DeviceMetricCategory! »Describes the measurement repetition time. This is not necessarily the same as the update period. The measurement repetition time can range from milliseconds up to hours. An example for a measurement repetition time in the range of milliseconds is the sampling rate of an ECG. An example for a measurement repetition time in the range of hours is a NIBP that is triggered automatically every hour. The update period may be different than the measurement repetition time, if the device does not update the published observed value with the same frequency as it was measuredmeasurementPeriod : Timing [0..1]CalibrationDescribes the type of the calibration methodtype : code [0..1] « Describes the type of a metric calibration (Strength=Required)DeviceMetricCalibrationType! »Describes the state of the calibrationstate : code [0..1] « Describes the state of a metric calibration (Strength=Required)DeviceMetricCalibrationState! »Describes the time last calibration has been performedtime : instant [0..1]Describes the calibrations that have been performed or that are required to be performedcalibration[0..*]

XML Template

<DeviceMetric xmlns="http://hl7.org/fhir"> doco
 <!-- from Resource: id, meta, implicitRules, and language -->
 <!-- from DomainResource: text, contained, extension, and modifierExtension -->
 <type><!-- 1..1 CodeableConcept Type of metric  --></type>
 <identifier><!-- 1..1 Identifier Unique identifier of this DeviceMetric --></identifier>
 <unit><!-- 0..1 CodeableConcept Unit of metric  --></unit>
 <source><!-- 0..1 Reference(Device) Describes the link to the source Device --></source>
 <parent><!-- 0..1 Reference(DeviceComponent) Describes the link to the parent DeviceComponent --></parent>
 <operationalStatus value="[code]"/><!-- 0..1 on | off | standby -->
 <color value="[code]"/><!-- 0..1 black | red | green | yellow | blue | magenta | cyan | white -->
 <category value="[code]"/><!-- 1..1 measurement | setting | calculation | unspecified -->
 <measurementPeriod><!-- 0..1 Timing Describes the measurement repetition time --></measurementPeriod>
 <calibration>  <!-- 0..* Describes the calibrations that have been performed or that are required to be performed -->
  <type value="[code]"/><!-- 0..1 unspecified | offset | gain | two-point -->
  <state value="[code]"/><!-- 0..1 not-calibrated | calibration-required | calibrated | unspecified -->
  <time value="[instant]"/><!-- 0..1 Describes the time last calibration has been performed -->
 </calibration>
</DeviceMetric>

Structure

NameFlagsCard.TypeDescription & Constraintsdoco
.. DeviceMetric ΣDomainResourceMeasurement, calculation or setting capability of a medical device
... type Σ1..1CodeableConceptType of metric
MetricType (Preferred)
... identifier Σ1..1IdentifierUnique identifier of this DeviceMetric
... unit Σ0..1CodeableConceptUnit of metric
MetricUnit (Preferred)
... source Σ0..1Reference(Device)Describes the link to the source Device
... parent Σ0..1Reference(DeviceComponent)Describes the link to the parent DeviceComponent
... operationalStatus Σ0..1codeon | off | standby
DeviceMetricOperationalStatus (Required)
... color Σ0..1codeblack | red | green | yellow | blue | magenta | cyan | white
DeviceMetricColor (Required)
... category Σ1..1codemeasurement | setting | calculation | unspecified
DeviceMetricCategory (Required)
... measurementPeriod Σ0..1TimingDescribes the measurement repetition time
... calibration Σ0..*BackboneElementDescribes the calibrations that have been performed or that are required to be performed
.... type Σ0..1codeunspecified | offset | gain | two-point
DeviceMetricCalibrationType (Required)
.... state Σ0..1codenot-calibrated | calibration-required | calibrated | unspecified
DeviceMetricCalibrationState (Required)
.... time Σ0..1instantDescribes the time last calibration has been performed

doco Documentation for this format

UML Diagram

DeviceMetric (DomainResource)Describes the type of the metric. For example: Heart Rate, PEEP Setting, etctype : CodeableConcept [1..1] « Describes the metric type (Strength=Preferred)MetricType? »Describes the unique identification of this metric that has been assigned by the device or gateway software. For example: handle ID. It should be noted that in order to make the identifier unique, the system element of the identifier should be set to the unique identifier of the deviceidentifier : Identifier [1..1]Describes the unit that an observed value determined for this metric will have. For example: Percent, Seconds, etcunit : CodeableConcept [0..1] « Describes the unit of the metric (Strength=Preferred)MetricUnit? »Describes the link to the Device that this DeviceMetric belongs to and that contains administrative device information such as manufacture, serial number, etcsource : Reference [0..1] « Device »Describes the link to the DeviceComponent that this DeviceMetric belongs to and that provide information about the location of this DeviceMetric in the containment structure of the parent Device. An example would be a DeviceComponent that represents a Channel. This reference can be used by a client application to distinguish DeviceMetrics that have the same type, but should be interpreted based on their containment locationparent : Reference [0..1] « DeviceComponent »Indicates current operational state of the device. For example: On, Off, Standby, etcoperationalStatus : code [0..1] « Describes the operational status of the DeviceMetric (Strength=Required)DeviceMetricOperationalStatus! »Describes the color representation for the metric. This is often used to aid clinicians to track and identify parameter types by color. In practice, consider a Patient Monitor that has ECG/HR and Pleth for example; the parameters are displayed in different characteristic colors, such as HR-blue, BP-green, and PR and SpO2- magentacolor : code [0..1] « Describes the typical color of representation (Strength=Required)DeviceMetricColor! »Indicates the category of the observation generation process. A DeviceMetric can be for example a setting, measurement, or calculationcategory : code [1..1] « Describes the category of the metric (Strength=Required)DeviceMetricCategory! »Describes the measurement repetition time. This is not necessarily the same as the update period. The measurement repetition time can range from milliseconds up to hours. An example for a measurement repetition time in the range of milliseconds is the sampling rate of an ECG. An example for a measurement repetition time in the range of hours is a NIBP that is triggered automatically every hour. The update period may be different than the measurement repetition time, if the device does not update the published observed value with the same frequency as it was measuredmeasurementPeriod : Timing [0..1]CalibrationDescribes the type of the calibration methodtype : code [0..1] « Describes the type of a metric calibration (Strength=Required)DeviceMetricCalibrationType! »Describes the state of the calibrationstate : code [0..1] « Describes the state of a metric calibration (Strength=Required)DeviceMetricCalibrationState! »Describes the time last calibration has been performedtime : instant [0..1]Describes the calibrations that have been performed or that are required to be performedcalibration[0..*]

XML Template

<DeviceMetric xmlns="http://hl7.org/fhir"> doco
 <!-- from Resource: id, meta, implicitRules, and language -->
 <!-- from DomainResource: text, contained, extension, and modifierExtension -->
 <type><!-- 1..1 CodeableConcept Type of metric  --></type>
 <identifier><!-- 1..1 Identifier Unique identifier of this DeviceMetric --></identifier>
 <unit><!-- 0..1 CodeableConcept Unit of metric  --></unit>
 <source><!-- 0..1 Reference(Device) Describes the link to the source Device --></source>
 <parent><!-- 0..1 Reference(DeviceComponent) Describes the link to the parent DeviceComponent --></parent>
 <operationalStatus value="[code]"/><!-- 0..1 on | off | standby -->
 <color value="[code]"/><!-- 0..1 black | red | green | yellow | blue | magenta | cyan | white -->
 <category value="[code]"/><!-- 1..1 measurement | setting | calculation | unspecified -->
 <measurementPeriod><!-- 0..1 Timing Describes the measurement repetition time --></measurementPeriod>
 <calibration>  <!-- 0..* Describes the calibrations that have been performed or that are required to be performed -->
  <type value="[code]"/><!-- 0..1 unspecified | offset | gain | two-point -->
  <state value="[code]"/><!-- 0..1 not-calibrated | calibration-required | calibrated | unspecified -->
  <time value="[instant]"/><!-- 0..1 Describes the time last calibration has been performed -->
 </calibration>
</DeviceMetric>

 

Alternate definitions: Schema/Schematron, Resource Profile (XML, JSON), Questionnaire

5.12.3.1 Terminology Bindings

PathDefinitionTypeReference
DeviceMetric.type Describes the metric typePreferredIEEE 11073-10101
DeviceMetric.unit Describes the unit of the metricPreferredIEEE 11073-10101
DeviceMetric.operationalStatus Describes the operational status of the DeviceMetricRequiredDeviceMetricOperationalStatus
DeviceMetric.color Describes the typical color of representationRequiredDeviceMetricColor
DeviceMetric.category Describes the category of the metricRequiredDeviceMetricCategory
DeviceMetric.calibration.type Describes the type of a metric calibrationRequiredDeviceMetricCalibrationType
DeviceMetric.calibration.state Describes the state of a metric calibrationRequiredDeviceMetricCalibrationState

5.12.4 Notes:

5.12.5 Search Parameters

Search parameters for this resource. The common parameters also apply. See Searching for more information about searching in REST, messaging, and services.

NameTypeDescriptionPaths
categorytokenThe category of the metricDeviceMetric.category
identifiertokenThe identifier of the metricDeviceMetric.identifier
parentreferenceThe parent DeviceMetric resourceDeviceMetric.parent
(DeviceComponent)
sourcereferenceThe device resourceDeviceMetric.source
(Device)
typetokenThe component typeDeviceMetric.type