DSTU2 Ballot Source

This page is part of the FHIR Specification (v0.5.0: DSTU 2 Ballot 2). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions

4.22.13.5.4 StructureDefinition: DAFDiagnosticOrder

Definitions for the diagnosticorder-daf-dafdiagnosticorder Profile.

DiagnosticOrder(DAFDiagnosticOrder)
Definition

A record of a request for a diagnostic investigation service to be performed.

Control1..1
TypeDiagnosticOrder
Alternate NamesDO
DiagnosticOrder.id
Definition

The logical id of the resource, as used in the url for the resoure. Once assigned, this value never changes.

Control0..1
Typeid
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation. Bundles always have an id, though it is usually a generated UUID.

DiagnosticOrder.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Control0..1
TypeMeta
DiagnosticOrder.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Control0..1
Typeuri
Is Modifiertrue
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element as much as possible.

DiagnosticOrder.language
Definition

The base language in which the resource is written.

Control0..1
BindingA human language
The codes SHALL be taken from http://tools.ietf.org/html/bcp47
Typecode
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource

Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

DiagnosticOrder.text
Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Control0..1 This element is affected by the following invariants: dom-1
TypeNarrative
Alternate Namesnarrative, html, xhtml, display
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative.

DiagnosticOrder.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Control0..*
TypeResource
Alternate Namesinline resources, anonymous resources, contained resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

DiagnosticOrder.extension
Definition

May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Control0..*
TypeExtension
Is Modifiertrue
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.subject
Definition

Who or what the investigation is to be performed on. This is usually a human patient, but diagnostic tests can also be requested on animals, groups of humans or animals, devices such as dialysis machines, or even locations (typically for environmental scans).

Control1..1
TypeReference (U.S. Data Access Framework (DAF) Patient Profile))
Must Supporttrue
Alternate NamesPatient
DiagnosticOrder.orderer
Definition

The practitioner that holds legal responsibility for ordering the investigation.

Control1..1
TypeReference (U.S. Data Access Framework (DAF) Practitioner Profile))
Must Supporttrue
Alternate NamesOrdering Provider, OP, Submitter, Placer
DiagnosticOrder.identifier
Definition

Identifiers assigned to this order by the order or by the receiver.

Control1..*
TypeIdentifier
Must Supporttrue
Alternate NamesPlacer ID, Filler ID
DiagnosticOrder.identifier.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.identifier.use
Definition

The purpose of this identifier.

Control1..1
BindingIdentifies the purpose for this identifier, if known
The codes SHALL be taken from IdentifierUse
Typecode
Is Modifiertrue
Must Supporttrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Comments

This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Fixed Valueofficial
DiagnosticOrder.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

Control0..1
BindingA coded type for an identifier that can be used to determine which identifier to use for a specific purpose
The codes SHALL be taken from Identifier Type Codes; other codes may be used where these codes are not suitable
TypeCodeableConcept
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Comments

Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

DiagnosticOrder.identifier.system
Definition

Establishes the namespace in which set of possible id values is unique.

Control1..1
Typeuri
Must Supporttrue
Requirements

There are many sequences of identifiers. To perform matching, we need to know what sequence we're dealing with. The system identifies a particular sequence or set of unique identifiers.

Examplehttp://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the id itself is a full uri
DiagnosticOrder.identifier.value
Definition

The portion of the identifier typically displayed to the user and which is unique within the context of the system.

Control1..1
Typestring
Must Supporttrue
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986.

Example123456
DiagnosticOrder.identifier.period
Definition

Time period during which identifier is/was valid for use.

Control0..1
TypePeriod
DiagnosticOrder.identifier.assigner
Definition

Organization that issued/manages the identifier.

Control0..1
TypeReference (Organization))
Comments

The reference may be just a text description of the assigner.

DiagnosticOrder.encounter
Definition

An encounter that provides additional information about the healthcare context in which this request is made.

Control0..*
TypeReference (U.S. Data Access Framework (DAF) Encounter profile))
Must Supporttrue
DiagnosticOrder.clinicalNotes
Definition

An explanation or justification for why this diagnostic investigation is being requested.

Control0..1
Typestring
Must Supporttrue
Comments

This may be used to decide how the diagnostic investigation will be performed, or even if it will be performed at all.

DiagnosticOrder.supportingInformation
Definition

Additional clinical information about the patient or specimen that may influence test interpretations.

Control0..*
TypeChoice of: Reference (Observation)), Reference (Condition)), Reference (DocumentReference))
Comments

This information includes diagnosis, clinical findings and other observations. Examples include reporting the amount of inspired carbon dioxide for blood gasses, the point in the menstrual cycle for cervical pap tests, and other conditions that influence test interpretations.

SlicingThis element introduces a set of slices. The slicing rules are:
  • unordered
  • Open
  • discriminators: @Profile, @type
DiagnosticOrder.supportingInformation(DAFSupportingInformation)
Definition

Additional clinical information about the patient or specimen that may influence test interpretations.

Control0..*
TypeChoice of: Reference (U.S. Data Access Framework (DAF) Lab Results Profile)), Reference (U.S. Data Access Framework (DAF) Lab Results Profile)), Reference (U.S. Data Access Framework (DAF) Lab Results Profile)), Reference (U.S. Data Access Framework (DAF) Lab Results Profile)), Reference (U.S. Data Access Framework (DAF) Lab Results Profile)), Reference (U.S. Data Access Framework (DAF) Condition (a.k.a Problem) Profile))
Must Supporttrue
Comments

This information includes diagnosis, clinical findings and other observations. Examples include reporting the amount of inspired carbon dioxide for blood gasses, the point in the menstrual cycle for cervical pap tests, and other conditions that influence test interpretations.

DiagnosticOrder.specimen
Definition

One or more specimens that the diagnostic investigation is about.

Control0..*
TypeReference (Specimen))
Comments

Many investigation requests will create a need for specimens, but the request itself is not actually about the specimens. This is provided for when the diagnostic investigation is requested on already existing specimens.

DiagnosticOrder.status
Definition

The status of the order.

Control1..1
BindingThe status of a diagnostic order
The codes SHALL be taken from DiagnosticOrderStatus
Typecode
Is Modifiertrue
Must Supporttrue
Comments

Typically the system placing the order sets the status to requested. Thereafter, the order is maintained by the receiver that updates the status as the request is handled.

DiagnosticOrder.priority
Definition

The clinical priority associated with this order.

Control1..1
BindingThe clinical priority of a diagnostic order
The codes SHALL be taken from DiagnosticOrderPriority
Typecode
Must Supporttrue
Comments

The Order resource also has a priority. Generally, these should be the same, but they can be different, for instance in the case where the clinician indicates that the order is urgent, but the subsequent workflow process overrule this priority for some reason. The effective default value is "normal".

DiagnosticOrder.event
Definition

A summary of the events of interest that have occurred as the request is processed. E.g. when the order was made, various processing steps (specimens received), when it was completed.

Control1..*
TypeElement
Must Supporttrue
Comments

This is not the same as an audit trail - it is a view of the important things that happened in the past. Typically, there would only be one entry for any given status, and systems may not record all the status events.

DiagnosticOrder.event.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.event.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.event.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Control0..*
TypeExtension
Is Modifiertrue
Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.event.status
Definition

The status for the event.

Control1..1
BindingThe status of a diagnostic order
The codes SHALL be taken from DiagnosticOrderStatus
Typecode
DiagnosticOrder.event.description
Definition

Additional information about the event that occurred - e.g. if the status remained unchanged.

Control1..1
BindingInformation about an event that occurred to a diagnostic order that corresponds to the USLabOrder Use Cases
The codes SHALL be taken from USLAB Diagnostic Order Event Codes; other codes may be used where these codes are not suitable
TypeCodeableConcept
Must Supporttrue
DiagnosticOrder.event.description.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.event.description.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.event.description.coding
Definition

A reference to a code defined by a terminology system.

Control1..1
TypeCoding
Must Supporttrue
Requirements

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the V3 Core Principles for more information. Ordering of codings is undefined and SHALL not be used to infer meaning.

DiagnosticOrder.event.description.coding.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.event.description.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.event.description.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Must Supporttrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

DiagnosticOrder.event.description.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Control0..1
Typestring
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

DiagnosticOrder.event.description.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Must Supporttrue
Requirements

Need to refer to a particular code in the system.

DiagnosticOrder.event.description.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control0..1
Typestring
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

DiagnosticOrder.event.description.coding.primary
Definition

Indicates that this code was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Requirements

This has been identified as a clinical safety criterium - that this exact code was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations.

DiagnosticOrder.event.description.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

DiagnosticOrder.event.dateTime
Definition

The date/time at which the event occurred.

Control1..1
TypedateTime
Must Supporttrue
DiagnosticOrder.event.actor
Definition

The person who was responsible for performing or recording the action.

Control0..1
TypeChoice of: Reference (Practitioner)), Reference (Device))
DiagnosticOrder.item
Definition

The specific diagnostic investigations that are requested as part of this request. Sometimes, there can only be one item per request, but in most contexts, more than one investigation can be requested.

Control1..*
TypeElement
Must Supporttrue
Comments

There would always be at least one item in normal usage, but this is optional so that a workflow can quote order details without having to list the items.

DiagnosticOrder.item.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.item.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.item.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Control0..*
TypeExtension
Is Modifiertrue
Alternate Namesextensions, user content, modifiers
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.item.code
Definition

The laboratory test, panel or battery that was ordered.

Control1..1
BindingLOINC codes
The codes SHALL be taken from US Laboratory Observation Profile Observation Name Codes; other codes may be used where these codes are not suitable
TypeCodeableConcept
Must Supporttrue
Comments

Many laboratory tests and radiology tests embed the specimen/organ system in the test name, for example, serum or serum/plasma glucose, or a chest xray. The specimen may not be recorded separately from the test code.

DiagnosticOrder.item.code.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.item.code.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.item.code.coding
Definition

A reference to a code defined by a terminology system.

Control1..*
TypeCoding
Must Supporttrue
Requirements

Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.

Comments

Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the V3 Core Principles for more information. Ordering of codings is undefined and SHALL not be used to infer meaning.

DiagnosticOrder.item.code.coding.id
Definition

unique id for the element within a resource (for internal references).

Control0..1
Typeid
DiagnosticOrder.item.code.coding.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

Control0..*
TypeExtension
Alternate Namesextensions, user content
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

DiagnosticOrder.item.code.coding.system
Definition

The identification of the code system that defines the meaning of the symbol in the code.

Control1..1
Typeuri
Must Supporttrue
Requirements

Need to be unambiguous about the source of the definition of the symbol.

Comments

The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.

DiagnosticOrder.item.code.coding.version
Definition

The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.

Control0..1
Typestring
Comments

Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.

DiagnosticOrder.item.code.coding.code
Definition

A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).

Control1..1
Typecode
Must Supporttrue
Requirements

Need to refer to a particular code in the system.

DiagnosticOrder.item.code.coding.display
Definition

A representation of the meaning of the code in the system, following the rules of the system.

Control0..1
Typestring
Must Supporttrue
Requirements

Need to be able to carry a human-readable meaning of the code for readers that do not know the system.

DiagnosticOrder.item.code.coding.primary
Definition

Indicates that this code was chosen by a user directly - i.e. off a pick list of available items (codes or displays).

Control0..1
Typeboolean
Requirements

This has been identified as a clinical safety criterium - that this exact code was chosen explicitly, rather than inferred by the system based on some rules or language processing.

Comments

Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations.

DiagnosticOrder.item.code.text
Definition

A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.

Control0..1
Typestring
Must Supporttrue
Requirements

The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.

Comments

Very often the text is the same as a displayName of one of the codings.

DiagnosticOrder.item.specimen
Definition

If the item is related to a specific specimen.

Control0..*
TypeReference (Specimen))
Comments

A single specimen should not appear in both DiagnosticOrder.specimen and DiagnosticOrder.item.specimen.

DiagnosticOrder.item.bodySite[x]
Definition

Anatomical location where the request test should be performed. This is the target site.

Control0..0
BindingCodes describing anatomical locations. May include laterality
For example codes, see SNOMED CT Body Structures
TypeChoice of: CodeableConcept, Reference (BodySite))
Alternate Nameslocation
DiagnosticOrder.item.status
Definition

The status of this individual item within the order.

Control1..1
BindingThe status of a diagnostic order
The codes SHALL be taken from DiagnosticOrderStatus
Typecode
Must Supporttrue
Comments

If the request has multiple items that have their own life cycles, then the items will have their own status while the overall diagnostic order is (usually) "in-progress".

DiagnosticOrder.item.event
Definition

A summary of the events of interest that have occurred as this item of the request is processed.

Control0..*
TypeSee event