This page is part of the Point-of-care Device FHIR IG (v0.1.0: STU 1 Draft) based on FHIR R3. . For a full list of available versions, see the Directory of published versions 
MDS DeviceComponent Profile
Canonical URL
http://devices.fhir.org/StructureDefinition/MdsDeviceComponent
Profile Definition
| Name | Flags | Card. | Type | |
|---|---|---|---|---|
| DeviceComponent | 0..* | DeviceComponent | Short description: An instance of a medical-related component of a medical device Definition:The characteristics, operational status and capabilities of a medical-related component of a medical device. For the initial scope, this DeviceComponent resource is only applicable to describe a single node in the containment tree that is produced by the context scanner in any medical device that implements or derives from the ISO/IEEE 11073 standard and that does not represent a metric. Examples for such a node are MDS, VMD, or Channel.
| |
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| modifierExtension | ?! | 0..* | Extension | Short description: Extensions that cannot be ignored Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
|
| identifier | Σ | 1..1 | Identifier | Short description: Instance id assigned by the software stack Definition:The locally assigned unique identification by the software. For example: handle ID.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| use | Σ ?! | 0..1 | codeBinding | Short description: usual | official | temp | secondary (If known) Definition:The purpose of this identifier. Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
|
| type | Σ | 0..1 | CodeableConceptBinding | Short description: Description of identifier Definition:A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Allows users to make use of identifiers when the identifier system is not known. This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| system | Σ | 0..1 | uri | Short description: The namespace for the identifier value Definition:Establishes the namespace for the value - that is, a URL that describes a set values that are unique. There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. see http://en.wikipedia.org/wiki/Uniform_resource_identifier
General Mappingshttp://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri
|
| value | Σ | 0..1 | string | Short description: The value that is unique Definition:The portion of the identifier typically relevant to the user and which is unique within the context of the system. If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.
General Mappings123456
|
| period | Σ | 0..1 | Period | Short description: Time period when id is/was valid for use Definition:Time period during which identifier is/was valid for use. This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| start | Σ | 0..1 | dateTime | Short description: Starting time with inclusive boundary Definition:The start of the period. The boundary is inclusive. If the low element is missing, the meaning is that the low boundary is not known.
|
| end | Σ | 0..1 | dateTime | Short description: End time with inclusive boundary, if not ongoing Definition:The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
|
| assigner | Σ | 0..1 | Reference(Organization) | Short description: Organization that issued id (may be just text) Definition:Organization that issued/manages the identifier. The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| reference | Σ | 0..1 | string | Short description: Literal reference, Relative, internal or absolute URL Definition:A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
|
| identifier | Σ | 0..1 | Identifier | Short description: Logical reference, when literal reference is not known Definition:An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
|
| display | Σ | 0..1 | string | Short description: Text alternative for the resource Definition:Plain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
|
| type | Σ | 1..1 | CodeableConceptBinding | Short description: Medical Device System (MDS) type Definition:DeviceComponent.type shall have a coding from the ISO/IEEE 11073 MDC device nomenclature. The Rosetta Terminology Mapping Management System (RTMMS) lists available codes. DeviceComponent.type.coding allows additional coding from other code systems. DeviceComponent.type can be referred to either GDMN (nomenclature system supported by FDA Global UDI Database) or preferable RTMMS coding system.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 1..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true. Unordered, Open, by system(Value) Constraints
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| 11073MDC | Σ | 1..1 | Coding | Short description: 11073 MDC code Definition:Code defined by the ISO/IEEE 11073-10101 Nomenclature Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 1..1 | uriFixed Value | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
urn:iso:std:iso:11073:10101
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 1..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| lastSystemChange | Σ | 0..1 | instant | Short description: Recent system change timestamp Definition:The timestamp for the most recent system change which includes device configuration or setting change. Note: This is intended for precisely observed times, typically system logs etc., and not human-reported times - for them, see date and dateTime below. Time zone is always required
|
| source | Σ | 1..1 | Reference(PoC Device Profile) | Short description: Top-level device resource link Definition:DeviceComponent.source shall be present and refer to a Device resource according to the PoC Device profile. References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Reference(PoC Device Profile) Constraints
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| reference | Σ | 0..1 | string | Short description: Literal reference, Relative, internal or absolute URL Definition:A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
|
| identifier | Σ | 0..1 | Identifier | Short description: Logical reference, when literal reference is not known Definition:An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
|
| display | Σ | 0..1 | string | Short description: Text alternative for the resource Definition:Plain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
|
| parent | Σ | 0..1 | Reference(MDS DeviceComponent Profile) | Short description: Parent resource link Definition:DeviceComponent.parent is a reference to the next upper level DeviceComponent resource. For MDS DeviceComponent it's optional and may refer to another MDS DeviceComponent as a composite MDS. References SHALL be a reference to an actual FHIR resource, and SHALL be resolveable (allowing for access control, temporary unavailability, etc). Resolution can be either by retrieval from the URL, or, where applicable by resource type, by treating an absolute reference as a canonical URL and looking it up in a local registry/repository. Reference(MDS DeviceComponent Profile) Constraints
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| reference | Σ | 0..1 | string | Short description: Literal reference, Relative, internal or absolute URL Definition:A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
|
| identifier | Σ | 0..1 | Identifier | Short description: Logical reference, when literal reference is not known Definition:An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
|
| display | Σ | 0..1 | string | Short description: Text alternative for the resource Definition:Plain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
|
| operationalStatus | Σ | 0..* | CodeableConceptBinding | Short description: Current operational status of the component, for example On, Off or Standby Definition:The current operational status of the device. For example: On, Off, Standby, etc. OperationalStatus for the MDS, VMD, or Channel will be bound to a specific ValueSet that is defined in its profile. operational-status (extensible) Constraints
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| parameterGroup | Σ | 0..1 | CodeableConceptBinding | Short description: Current supported parameter group Definition:The parameter group supported by the current device component that is based on some nomenclature, e.g. cardiovascular. Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| measurementPrinciple | Σ | 0..1 | codeBinding | Short description: other | chemical | electrical | impedance | nuclear | optical | thermal | biological | mechanical | acoustical | manual+ Definition:The physical principle of the measurement. For example: thermal, chemical, acoustical, etc. Note that FHIR strings may not exceed 1MB in size measurement-principle (required) Constraints
|
| productionSpecification | Σ | 0..* | BackboneElement | Short description: Specification details such as Component Revisions, or Serial Numbers Definition:The production specification such as component revision, serial number, etc.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| specType | Σ | 0..1 | CodeableConceptBinding | Short description: Type or kind of production specification, for example serial number or software revision Definition:The specification type, such as, serial number, part number, hardware revision, software revision, etc. Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination. specification-type (extensible) Constraints
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| componentId | Σ | 0..1 | Identifier | Short description: Internal component unique identification Definition:The internal component unique identification. This is a provision for manufacture specific standard components using a private OID. 11073-10101 has a partition for private OID semantic that the manufacturer can make use of.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| use | Σ ?! | 0..1 | codeBinding | Short description: usual | official | temp | secondary (If known) Definition:The purpose of this identifier. Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers. This is labeled as "Is Modifier" because applications should not mistake a temporary id for a permanent one. Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.
|
| type | Σ | 0..1 | CodeableConceptBinding | Short description: Description of identifier Definition:A coded type for the identifier that can be used to determine which identifier to use for a specific purpose. Allows users to make use of identifiers when the identifier system is not known. This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
| system | Σ | 0..1 | uri | Short description: The namespace for the identifier value Definition:Establishes the namespace for the value - that is, a URL that describes a set values that are unique. There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers. see http://en.wikipedia.org/wiki/Uniform_resource_identifier
General Mappingshttp://www.acme.com/identifiers/patient or urn:ietf:rfc:3986 if the Identifier.value itself is a full uri
|
| value | Σ | 0..1 | string | Short description: The value that is unique Definition:The portion of the identifier typically relevant to the user and which is unique within the context of the system. If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension.
General Mappings123456
|
| period | Σ | 0..1 | Period | Short description: Time period when id is/was valid for use Definition:Time period during which identifier is/was valid for use. This is not a duration - that's a measure of time (a separate type), but a duration that occurs at a fixed value of time. A Period specifies a range of time; the context of use will specify whether the entire range applies (e.g. "the patient was an inpatient of the hospital for this time range") or one value from the range applies (e.g. "give to the patient between these two times"). If duration is required, specify the type as Interval|Duration.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| start | Σ | 0..1 | dateTime | Short description: Starting time with inclusive boundary Definition:The start of the period. The boundary is inclusive. If the low element is missing, the meaning is that the low boundary is not known.
|
| end | Σ | 0..1 | dateTime | Short description: End time with inclusive boundary, if not ongoing Definition:The end of the period. If the end of the period is missing, it means that the period is ongoing. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time. The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has a end value of 2012-02-03.
|
| assigner | Σ | 0..1 | Reference(Organization) | Short description: Organization that issued id (may be just text) Definition:Organization that issued/manages the identifier. The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| reference | Σ | 0..1 | string | Short description: Literal reference, Relative, internal or absolute URL Definition:A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources. Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.
|
| identifier | Σ | 0..1 | Identifier | Short description: Logical reference, when literal reference is not known Definition:An identifier for the other resource. This is used when there is no way to reference the other resource directly, either because the entity is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference. When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy. When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.
|
| display | Σ | 0..1 | string | Short description: Text alternative for the resource Definition:Plain text narrative that identifies the resource in addition to the resource reference. This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.
|
| productionSpec | Σ | 0..1 | string | Short description: A printable string defining the component Definition:The printable string defining the component. Note that FHIR strings may not exceed 1MB in size
|
| languageCode | Σ | 0..1 | CodeableConceptBinding | Short description: Language code for the human-readable text strings produced by the device Definition:The language code for the human-readable text string produced by the device. This language code will follow the IETF language tag. Example: en-US. Not all terminology uses fit this general pattern. In some cases, models should not use CodeableConcept and use Coding directly and provide their own structure for managing text, codings, translations and the relationship between elements and pre- and post-coordination.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| coding | Σ | 0..* | Coding | Short description: Code defined by a terminology system Definition:A reference to a code defined by a terminology system. Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings. Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.
|
| extension | 0..* | Extension | Short description: Additional Content defined by implementations Alternate names:extensions, user content Definition:May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. Unordered, Open, by url(Value) Constraints
| |
| system | Σ | 0..1 | uri | Short description: Identity of the terminology system Definition:The identification of the code system that defines the meaning of the symbol in the code. Need to be unambiguous about the source of the definition of the symbol. The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should de-reference to some definition that establish the system clearly and unambiguously.
|
| version | Σ | 0..1 | string | Short description: Version of the system - if relevant Definition:The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured. and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged. Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.
|
| code | Σ | 0..1 | code | Short description: Symbol in syntax defined by the system Definition:A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination). Need to refer to a particular code in the system. Note that FHIR strings may not exceed 1MB in size
|
| display | Σ | 0..1 | string | Short description: Representation defined by the system Definition:A representation of the meaning of the code in the system, following the rules of the system. Need to be able to carry a human-readable meaning of the code for readers that do not know the system. Note that FHIR strings may not exceed 1MB in size
|
| userSelected | Σ | 0..1 | boolean | Short description: If this coding was chosen directly by the user Definition:Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays). This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing. Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.
|
| text | Σ | 0..1 | string | Short description: Plain text representation of the concept Definition:A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user. The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source. Very often the text is the same as a displayName of one of the codings.
|
Example (XML view)
Example of a Physio Monitor MDS DeviceComponent
<DeviceComponent> <id value="427" /> <meta> <profile value="http://devices.fhir.org/StructureDefinition/MdsDeviceComponent" /> </meta> <identifier> <use value="temp" /> <system value="urn:ietf:rfc:3986" /> <value value="urn:uuid:ae5b5cca-fbd9-4323-842d-fe43064bd06f" /> </identifier> <type> <coding> <system value="urn:iso:std:iso:11073:10101" /> <code value="69965" /> <display value="MDC_DEV_MON_PHYSIO_MULTI_PARAM_MDS" /> </coding> </type> <source> <reference value="Device/72" /> </source> <operationalStatus> <coding> <system value="http://hl7.org/fhir/operational-status" /> <code value="on" /> <display value="On" /> </coding> </operationalStatus> <productionSpecification> <specType> <coding> <system value="http://hl7.org/fhir/specification-type" /> <code value="serial-number" /> <display value="Serial Number" /> </coding> </specType> <productionSpec value="DE35115712" /> </productionSpecification> <productionSpecification> <specType> <coding> <system value="http://hl7.org/fhir/specification-type" /> <code value="part-number" /> <display value="Part Number" /> </coding> </specType> <productionSpec value="866060" /> </productionSpecification> <productionSpecification> <specType> <coding> <system value="http://hl7.org/fhir/specification-type" /> <code value="hardware-revision" /> <display value="Hardware Revision" /> </coding> </specType> <productionSpec value="A.00.22" /> </productionSpecification> <languageCode> <coding> <system value="urn:ietf:bcp:47" /> <code value="en" /> </coding> </languageCode> </DeviceComponent>
Example (JSON view)
Example of a Physio Monitor MDS DeviceComponent
{ "resourceType":"DeviceComponent", "id":"427", "meta":{ "profile": [ "http://devices.fhir.org/StructureDefinition/MdsDeviceComponent" ] }, "identifier":{ "use":"temp", "system":"urn:ietf:rfc:3986", "value":"urn:uuid:ae5b5cca-fbd9-4323-842d-fe43064bd06f" }, "type":{ "coding": [ { "system":"urn:iso:std:iso:11073:10101", "code":"69965", "display":"MDC_DEV_MON_PHYSIO_MULTI_PARAM_MDS" } ] }, "source":{ "reference":"Device/72" }, "operationalStatus": [ { "coding": [ { "system":"http://hl7.org/fhir/operational-status", "code":"on", "display":"On" } ] } ], "productionSpecification": [ { "specType":{ "coding": [ { "system":"http://hl7.org/fhir/specification-type", "code":"serial-number", "display":"Serial Number" } ] }, "productionSpec":"DE35115712" }, { "specType":{ "coding": [ { "system":"http://hl7.org/fhir/specification-type", "code":"part-number", "display":"Part Number" } ] }, "productionSpec":"866060" }, { "specType":{ "coding": [ { "system":"http://hl7.org/fhir/specification-type", "code":"hardware-revision", "display":"Hardware Revision" } ] }, "productionSpec":"A.00.22" } ], "languageCode":{ "coding": [ { "system":"urn:ietf:bcp:47", "code":"en" } ] } }