This page is part of the Personal Health Device FHIR IG (v0.2.0: STU 1 Ballot 2) based on FHIR R4. The current version which supercedes this version is 1.0.0. For a full list of available versions, see the Directory of published versions

ASN1ToHL7 - XML Representation

(back to narrative)

Raw xml


<CodeSystem xmlns="http://hl7.org/fhir">
  <id value="ASN1ToHL7"/>
  <meta>
    <profile value="http://hl7.org/fhir/StructureDefinition/shareablecodesystem"/>
  </meta>
  <text>
    <status value="generated"/>
    <div xmlns="http://www.w3.org/1999/xhtml"><h2>ASN1ToHL7</h2><div><p>Maps IEEE 11073 ASN1 BITS measurements to codes. All these codes have two possible values, set or cleared. The code may either represent an event or a state. When an event, the defined event has occurred when set. If a state, the described item is either set or cleared. Sometimes the states may be defined in unexpected manners. For example, the regulation state when set is unregulated and when cleared it is regulated. In addition the code may derive from an IEEE 11073 attribute or from a measurement.</p>
</div><p><b>Properties</b></p><table class="grid"><tr><td><b>Code</b></td><td><b>URL</b></td><td><b>Description</b></td><td><b>Type</b></td></tr><tr><td>type</td><td/><td>Indicates that the code type is an event or state</td><td>code</td></tr><tr><td>source</td><td/><td>Indicates that the code originates from a measurement or an attribute that further describes a measurement or the sensor device.</td><td>code</td></tr></table><p>This code system http://hl7.org/fhir/uv/phd/CodeSystem/ASN1ToHL7 defines the following codes:</p><table class="codes"><tr><td style="white-space:nowrap"><b>Code</b></td><td><b>Display</b></td><td><b>Definition</b></td></tr><tr><td style="white-space:nowrap">67925.0<a name="ASN1ToHL7-67925.460"> </a></td><td>Mains power state</td><td>Indicates whether the PHD is on or off mains power</td></tr><tr><td style="white-space:nowrap">67925.1<a name="ASN1ToHL7-67925.461"> </a></td><td>Battery state</td><td>Indicates whether the PHD is on or off Battery power</td></tr><tr><td style="white-space:nowrap">67925.8<a name="ASN1ToHL7-67925.468"> </a></td><td>Charging at full rate</td><td>Indicates whether the PHD battery is charging at maximum rate</td></tr><tr><td style="white-space:nowrap">67925.9<a name="ASN1ToHL7-67925.469"> </a></td><td>Charging at trickle rate</td><td>Indicates whether the PHD battery is charging at a trickle rate</td></tr><tr><td style="white-space:nowrap">67925.10<a name="ASN1ToHL7-67925.4610"> </a></td><td>Charging state</td><td>Indicates whether the PHD battery charging is on or off</td></tr><tr><td style="white-space:nowrap">532354.0<a name="ASN1ToHL7-532354.460"> </a></td><td>If bit is cleared device is regulated</td><td>Indicates whether the device is regulated</td></tr><tr><td style="white-space:nowrap">68219.0<a name="ASN1ToHL7-68219.460"> </a></td><td>Real-time clock</td><td>Indicates real time clock is supported</td></tr><tr><td style="white-space:nowrap">68219.1<a name="ASN1ToHL7-68219.461"> </a></td><td>PHG set-time</td><td>Indicates support for the PHG to set the time</td></tr><tr><td style="white-space:nowrap">68219.2<a name="ASN1ToHL7-68219.462"> </a></td><td>Relative Time</td><td>Indicates Relative Time is supported</td></tr><tr><td style="white-space:nowrap">68219.3<a name="ASN1ToHL7-68219.463"> </a></td><td>Hi-Res Relative Time</td><td>Indicates Hi-Res Relative Time is supported</td></tr><tr><td style="white-space:nowrap">68219.4<a name="ASN1ToHL7-68219.464"> </a></td><td>Sync Absolute Time</td><td>Indicates that syncing the absolute time is supported</td></tr><tr><td style="white-space:nowrap">68219.5<a name="ASN1ToHL7-68219.465"> </a></td><td>Sync Relative Time</td><td>Indicates that syncing the relative time is supported</td></tr><tr><td style="white-space:nowrap">68219.6<a name="ASN1ToHL7-68219.466"> </a></td><td>Sync Hi-Res Relative Time</td><td>Indicates that syncing hi-res relative time is supported</td></tr><tr><td style="white-space:nowrap">68219.7<a name="ASN1ToHL7-68219.467"> </a></td><td>Base Offset Time</td><td>Indicates that the real-time clock supports base offset time</td></tr><tr><td style="white-space:nowrap">68219.8<a name="ASN1ToHL7-68219.468"> </a></td><td>Absolute Time Synced</td><td>Indicates the absolute time has been synced</td></tr><tr><td style="white-space:nowrap">68219.9<a name="ASN1ToHL7-68219.469"> </a></td><td>Relative Time Synced</td><td>Indicates the relative time has been synced</td></tr><tr><td style="white-space:nowrap">68219.10<a name="ASN1ToHL7-68219.4610"> </a></td><td>Hi-Res Relative Time Synced</td><td>Indicates the hi-res time has been synced</td></tr><tr><td style="white-space:nowrap">68219.11<a name="ASN1ToHL7-68219.4611"> </a></td><td>PHG Set-Time Requested</td><td>PHG Requested to set the time</td></tr><tr><td style="white-space:nowrap">68219.12<a name="ASN1ToHL7-68219.4612"> </a></td><td>Syncing base-offset time support</td><td>Indicates that syncing base-offset time is supported</td></tr><tr><td style="white-space:nowrap">68219.13<a name="ASN1ToHL7-68219.4613"> </a></td><td>Base-Offset Time Synced</td><td>Indicates that base-offset time has been synced</td></tr><tr><td style="white-space:nowrap">68219.14<a name="ASN1ToHL7-68219.4614"> </a></td><td>Base-Offset Time UTC Aligned</td><td>Indicates that base-offset time is aligned with UTC time standard</td></tr><tr><td style="white-space:nowrap">68219.15<a name="ASN1ToHL7-68219.4615"> </a></td><td>Daylight Savings Time Rules Understood</td><td>Indicates support for daylight savings time rules</td></tr><tr><td style="white-space:nowrap">67846.0<a name="ASN1ToHL7-67846.460"> </a></td><td>All alerts disabled</td><td>Indicates both the high and the low limit alerts are disabled</td></tr><tr><td style="white-space:nowrap">67846.1<a name="ASN1ToHL7-67846.461"> </a></td><td>Low limit alert disabled</td><td>Indicates the low limit alert is disabled</td></tr><tr><td style="white-space:nowrap">67846.2<a name="ASN1ToHL7-67846.462"> </a></td><td>High limit alert disabled</td><td>Indicates the high limit alert is disabled</td></tr><tr><td style="white-space:nowrap">150604.0<a name="ASN1ToHL7-150604.460"> </a></td><td>Device not connected to sensor</td><td>Indicates the device is not connected with the sensor</td></tr><tr><td style="white-space:nowrap">150604.1<a name="ASN1ToHL7-150604.461"> </a></td><td>Sensor has malfunctioned</td><td>Indicates the sensor has malfunctioned</td></tr><tr><td style="white-space:nowrap">150604.2<a name="ASN1ToHL7-150604.462"> </a></td><td>Sensor incorrectly placed on user</td><td>Indicates the sensor is not correctly placed on the user</td></tr><tr><td style="white-space:nowrap">150604.3<a name="ASN1ToHL7-150604.463"> </a></td><td>Unsupported sensor</td><td>Indicates the sensor connected to the device is unsupported</td></tr><tr><td style="white-space:nowrap">150604.4<a name="ASN1ToHL7-150604.464"> </a></td><td>Sensor off</td><td>Indicates the sensor is not connected to the user</td></tr><tr><td style="white-space:nowrap">150604.5<a name="ASN1ToHL7-150604.465"> </a></td><td>Sensor interference</td><td>Indicates the sensor is experiencing interference</td></tr><tr><td style="white-space:nowrap">150604.6<a name="ASN1ToHL7-150604.466"> </a></td><td>Searching for signal</td><td>Indicates the sensor is searching for a signal</td></tr><tr><td style="white-space:nowrap">150604.7<a name="ASN1ToHL7-150604.467"> </a></td><td>Signal pulse questionable</td><td>Indicates a questionable pulse has been detected</td></tr><tr><td style="white-space:nowrap">150604.8<a name="ASN1ToHL7-150604.468"> </a></td><td>Non pulsatile signal</td><td>Indicates a non pulsatile signal has been detected</td></tr><tr><td style="white-space:nowrap">150604.9<a name="ASN1ToHL7-150604.469"> </a></td><td>Signal erratic</td><td>Indicates a signal has been discovered, but it is erratic</td></tr><tr><td style="white-space:nowrap">150604.10<a name="ASN1ToHL7-150604.4610"> </a></td><td>Signal low perfusion</td><td>Indicates the signal is experiencing low perfusion</td></tr><tr><td style="white-space:nowrap">150604.11<a name="ASN1ToHL7-150604.4611"> </a></td><td>Signal is poor</td><td>Indicates the signal has been discovered, but it is poor</td></tr><tr><td style="white-space:nowrap">150604.12<a name="ASN1ToHL7-150604.4612"> </a></td><td>Signal inadequate</td><td>Indicates the signal has been discovered, but it is inadequate</td></tr><tr><td style="white-space:nowrap">150604.13<a name="ASN1ToHL7-150604.4613"> </a></td><td>Signal experiencing processing irregularity</td><td>Indicates the signal has been discovered, but is experiencing processing irregularity</td></tr><tr><td style="white-space:nowrap">150604.14<a name="ASN1ToHL7-150604.4614"> </a></td><td>Device malfunction</td><td>Indicates a device malfunction has occurred</td></tr><tr><td style="white-space:nowrap">150604.15<a name="ASN1ToHL7-150604.4615"> </a></td><td>Device extended update</td><td>Indicates an extended display update is in progress on device</td></tr><tr><td style="white-space:nowrap">150605.0<a name="ASN1ToHL7-150605.460"> </a></td><td>Pulse quality nominal</td><td>Indicates no abnormalities have been detected by the sensor</td></tr><tr><td style="white-space:nowrap">150605.1<a name="ASN1ToHL7-150605.461"> </a></td><td>Pulse quality marginal</td><td>Indicates the pulse profusion or quality is marginal</td></tr><tr><td style="white-space:nowrap">150605.2<a name="ASN1ToHL7-150605.462"> </a></td><td>Pulse quality minimal</td><td>Indicates the pulse profusion or quality is minimal</td></tr><tr><td style="white-space:nowrap">150605.3<a name="ASN1ToHL7-150605.463"> </a></td><td>Pulse quality unacceptable</td><td>Indicates the pulse profusion or quality is unacceptable</td></tr><tr><td style="white-space:nowrap">8410584.0<a name="ASN1ToHL7-8410584.460"> </a></td><td>Lead wire loss</td><td>Loss of unspecified lead wire or electrode connection</td></tr><tr><td style="white-space:nowrap">8410584.1<a name="ASN1ToHL7-8410584.461"> </a></td><td>Lead signal loss</td><td>Loss of unspecified lead signal</td></tr><tr><td style="white-space:nowrap">8410584.2<a name="ASN1ToHL7-8410584.462"> </a></td><td>Lead wire loss first-lead</td><td>Loss of 1st lead wire or electrode connection</td></tr><tr><td style="white-space:nowrap">8410584.3<a name="ASN1ToHL7-8410584.463"> </a></td><td>Lead signal loss first-lead</td><td>Loss of 1st lead signal</td></tr><tr><td style="white-space:nowrap">8410584.4<a name="ASN1ToHL7-8410584.464"> </a></td><td>Lead wire loss second-lead</td><td>Loss of 2nd lead wire or electrode connection</td></tr><tr><td style="white-space:nowrap">8410584.5<a name="ASN1ToHL7-8410584.465"> </a></td><td>Lead signal loss second-lead</td><td>Loss of 2nd lead signal</td></tr><tr><td style="white-space:nowrap">8410584.6<a name="ASN1ToHL7-8410584.466"> </a></td><td>Lead wire loss third-lead</td><td>Loss of 3rd lead wire or electrode connection</td></tr><tr><td style="white-space:nowrap">8410584.7<a name="ASN1ToHL7-8410584.467"> </a></td><td>Lead signal loss third-lead</td><td>Loss of 3rd lead signal</td></tr><tr><td style="white-space:nowrap">8417752.0<a name="ASN1ToHL7-8417752.460"> </a></td><td>Battery low</td><td>The device battery is low</td></tr><tr><td style="white-space:nowrap">8417752.1<a name="ASN1ToHL7-8417752.461"> </a></td><td>Sensor malfunction</td><td>The sensor has malfunctioned</td></tr><tr><td style="white-space:nowrap">8417752.2<a name="ASN1ToHL7-8417752.462"> </a></td><td>Not enough blood in sample</td><td>The sensor's sample size is insufficient</td></tr><tr><td style="white-space:nowrap">8417752.3<a name="ASN1ToHL7-8417752.463"> </a></td><td>Sensor strip insertion</td><td>The test strip was inserted incorrectly</td></tr><tr><td style="white-space:nowrap">8417752.4<a name="ASN1ToHL7-8417752.464"> </a></td><td>Sensor strip type incorrect</td><td>The test strip type is incompatable with the sensor</td></tr><tr><td style="white-space:nowrap">8417752.5<a name="ASN1ToHL7-8417752.465"> </a></td><td>Sensor result too high</td><td>The value reported by the sensor is too high</td></tr><tr><td style="white-space:nowrap">8417752.6<a name="ASN1ToHL7-8417752.466"> </a></td><td>Sensor result too low</td><td>The value reported by the sensor is too low</td></tr><tr><td style="white-space:nowrap">8417752.7<a name="ASN1ToHL7-8417752.467"> </a></td><td>Sensor temp too high</td><td>The temperature is too high</td></tr><tr><td style="white-space:nowrap">8417752.8<a name="ASN1ToHL7-8417752.468"> </a></td><td>Sensor temp too low</td><td>The temperature is too low</td></tr><tr><td style="white-space:nowrap">8417752.9<a name="ASN1ToHL7-8417752.469"> </a></td><td>Sensor read interrupt</td><td>The read process was interrupted</td></tr><tr><td style="white-space:nowrap">8417752.10<a name="ASN1ToHL7-8417752.4610"> </a></td><td>General Device Fault</td><td>General Device Fault</td></tr><tr><td style="white-space:nowrap">8417752.11<a name="ASN1ToHL7-8417752.4611"> </a></td><td>Sensor temp out of range</td><td>The temperature is out of range</td></tr><tr><td style="white-space:nowrap">8417909.0<a name="ASN1ToHL7-8417909.460"> </a></td><td>INR device battery low</td><td>The INR device battery is low</td></tr><tr><td style="white-space:nowrap">8417909.1<a name="ASN1ToHL7-8417909.461"> </a></td><td>Sensor malfunction</td><td>The INR device sensor has malfunctioned</td></tr><tr><td style="white-space:nowrap">8417909.2<a name="ASN1ToHL7-8417909.462"> </a></td><td>Not enough blood in sample</td><td>The sample size was insufficient</td></tr><tr><td style="white-space:nowrap">8417909.3<a name="ASN1ToHL7-8417909.463"> </a></td><td>INR sensor strip insertion</td><td>The test script was inserted incorrectly</td></tr><tr><td style="white-space:nowrap">8417909.4<a name="ASN1ToHL7-8417909.464"> </a></td><td>INR sensor strip type incorrect</td><td>The test strip used is not compatible with the INR</td></tr><tr><td style="white-space:nowrap">8417909.5<a name="ASN1ToHL7-8417909.465"> </a></td><td>INR sensor result too high</td><td>The test result is too high</td></tr><tr><td style="white-space:nowrap">8417909.6<a name="ASN1ToHL7-8417909.466"> </a></td><td>INR sensor result too low</td><td>The test result is too low</td></tr><tr><td style="white-space:nowrap">8417909.7<a name="ASN1ToHL7-8417909.467"> </a></td><td>INR sensor temp too high</td><td>The temperature is too high</td></tr><tr><td style="white-space:nowrap">8417909.8<a name="ASN1ToHL7-8417909.468"> </a></td><td>INR sensor temp too low</td><td>The temperature is too low</td></tr><tr><td style="white-space:nowrap">8417909.9<a name="ASN1ToHL7-8417909.469"> </a></td><td>INR sensor read interrupt</td><td>The read process was  interrupted</td></tr><tr><td style="white-space:nowrap">8417909.10<a name="ASN1ToHL7-8417909.4610"> </a></td><td>INR device general fault</td><td>General device fault</td></tr><tr><td style="white-space:nowrap">8417909.11<a name="ASN1ToHL7-8417909.4611"> </a></td><td>INR sensor calibration due</td><td>The INR sensor calibration is due</td></tr><tr><td style="white-space:nowrap">8408608.0<a name="ASN1ToHL7-8408608.460"> </a></td><td>Undetermined device status</td><td>Undetermined device status event</td></tr><tr><td style="white-space:nowrap">8408608.1<a name="ASN1ToHL7-8408608.461"> </a></td><td>Device status reset</td><td>Device reset</td></tr><tr><td style="white-space:nowrap">8408608.5<a name="ASN1ToHL7-8408608.465"> </a></td><td>Device status error</td><td>Device error</td></tr><tr><td style="white-space:nowrap">8408608.6<a name="ASN1ToHL7-8408608.466"> </a></td><td>Device status error mechanical</td><td>Mechanical error</td></tr><tr><td style="white-space:nowrap">8408608.7<a name="ASN1ToHL7-8408608.467"> </a></td><td>Device status error electronic</td><td>Electronic error</td></tr><tr><td style="white-space:nowrap">8408608.8<a name="ASN1ToHL7-8408608.468"> </a></td><td>Device status error software</td><td>Software error</td></tr><tr><td style="white-space:nowrap">8408608.9<a name="ASN1ToHL7-8408608.469"> </a></td><td>Device status error battery</td><td>Battery error</td></tr><tr><td style="white-space:nowrap">8408608.15<a name="ASN1ToHL7-8408608.4615"> </a></td><td>Device status service</td><td>Undetermined device status event</td></tr><tr><td style="white-space:nowrap">8408608.16<a name="ASN1ToHL7-8408608.4616"> </a></td><td>Device status service time-sync required</td><td>Time sync service required</td></tr><tr><td style="white-space:nowrap">8408608.17<a name="ASN1ToHL7-8408608.4617"> </a></td><td>Device status service calibration required</td><td>Calibration required</td></tr><tr><td style="white-space:nowrap">8408608.18<a name="ASN1ToHL7-8408608.4618"> </a></td><td>Device status service replentishment required</td><td>Replentishment required</td></tr><tr><td style="white-space:nowrap">8408608.25<a name="ASN1ToHL7-8408608.4625"> </a></td><td>Device status battery low</td><td>Battery power is too low</td></tr><tr><td style="white-space:nowrap">8408608.26<a name="ASN1ToHL7-8408608.4626"> </a></td><td>Device status battery depleted</td><td>Battery is depleted</td></tr><tr><td style="white-space:nowrap">8408608.27<a name="ASN1ToHL7-8408608.4627"> </a></td><td>Device status battery replaced</td><td>Battery has been replaced</td></tr><tr><td style="white-space:nowrap">8408608.28<a name="ASN1ToHL7-8408608.4628"> </a></td><td>Device status battery interrupted</td><td>Battery was interrupted</td></tr><tr><td style="white-space:nowrap">8418060.0<a name="ASN1ToHL7-8418060.460"> </a></td><td>Sensor session stopped</td><td>Session stopped</td></tr><tr><td style="white-space:nowrap">8418060.2<a name="ASN1ToHL7-8418060.462"> </a></td><td>Sensor type incorrect</td><td>Sensor type incorrect for device</td></tr><tr><td style="white-space:nowrap">8418060.3<a name="ASN1ToHL7-8418060.463"> </a></td><td>Sensor malfunction</td><td>The sensor malfunctioned</td></tr><tr><td style="white-space:nowrap">8418060.4<a name="ASN1ToHL7-8418060.464"> </a></td><td>Device specific alert</td><td>Device specific alert</td></tr><tr><td style="white-space:nowrap">8418060.7<a name="ASN1ToHL7-8418060.467"> </a></td><td>Sensor calibration not allowed</td><td>Calibrating the sensor is not allowed</td></tr><tr><td style="white-space:nowrap">8418060.8<a name="ASN1ToHL7-8418060.468"> </a></td><td>Sensor calibration recommended</td><td>Calibrating the sensor is recommended</td></tr><tr><td style="white-space:nowrap">8418060.9<a name="ASN1ToHL7-8418060.469"> </a></td><td>Sensor calibration required</td><td>Calibrating the sensor is required</td></tr><tr><td style="white-space:nowrap">8418060.10<a name="ASN1ToHL7-8418060.4610"> </a></td><td>Sensor temp too high</td><td>Temperature is too high for a valid result</td></tr><tr><td style="white-space:nowrap">8418060.11<a name="ASN1ToHL7-8418060.4611"> </a></td><td>Sensor temp too low</td><td>Temperature is too low for a valid result</td></tr><tr><td style="white-space:nowrap">8418060.12<a name="ASN1ToHL7-8418060.4612"> </a></td><td>Sensor result below patient level</td><td>Sensor result below the Patient Low level</td></tr><tr><td style="white-space:nowrap">8418060.13<a name="ASN1ToHL7-8418060.4613"> </a></td><td>Sensor result above patient level</td><td>Sensor result above the Patient High level</td></tr><tr><td style="white-space:nowrap">8418060.14<a name="ASN1ToHL7-8418060.4614"> </a></td><td>Sensor low hypo</td><td>Sensor result below the Hypo level</td></tr><tr><td style="white-space:nowrap">8418060.15<a name="ASN1ToHL7-8418060.4615"> </a></td><td>Sensor result hyper</td><td>Sensor result above the Hyper level</td></tr><tr><td style="white-space:nowrap">8418060.16<a name="ASN1ToHL7-8418060.4616"> </a></td><td>Sensor rate decrease exceeded</td><td>The sensor rate of decrease has been exceeded</td></tr><tr><td style="white-space:nowrap">8418060.17<a name="ASN1ToHL7-8418060.4617"> </a></td><td>Sensor rate increase exceeded</td><td>The sensor rate of increase has been exceeded</td></tr><tr><td style="white-space:nowrap">8418060.18<a name="ASN1ToHL7-8418060.4618"> </a></td><td>Sensor result too low</td><td>Sensor result is lower than the device can process</td></tr><tr><td style="white-space:nowrap">8418060.19<a name="ASN1ToHL7-8418060.4619"> </a></td><td>Sensor result too high</td><td>Sensor result is higher than the device can process</td></tr><tr><td style="white-space:nowrap">8418060.20<a name="ASN1ToHL7-8418060.4620"> </a></td><td>Sensor com out of range</td><td>The sensor communication is out of range</td></tr></table></div>
  </text>
  <url value="http://hl7.org/fhir/uv/phd/CodeSystem/ASN1ToHL7"/>
  <version value="0.2.0"/>
  <name value="ASN1ToHL7"/>
  <status value="draft"/>
  <experimental value="true"/>
  <date value="2018-09-18"/>
  <publisher
             value="Health Level Seven International (Health Care Devices Work Group)"/>
  <description
               value="Maps IEEE 11073 ASN1 BITS measurements to codes. All these codes have two possible values, set or cleared. The code may either represent an event or a state. When an event, the defined event has occurred when set. If a state, the described item is either set or cleared. Sometimes the states may be defined in unexpected manners. For example, the regulation state when set is unregulated and when cleared it is regulated. In addition the code may derive from an IEEE 11073 attribute or from a measurement."/>
  <jurisdiction>
    <coding>
      <system value="http://unstats.un.org/unsd/methods/m49/m49.htm"/>
      <code value="001"/>
      <display value="World"/>
    </coding>
  </jurisdiction>
  <caseSensitive value="true"/>
  <content value="complete"/>
  <property>
    <code value="type"/>
    <description value="Indicates that the code type is an event or state"/>
    <type value="code"/>
  </property>
  <property>
    <code value="source"/>
    <description
                 value="Indicates that the code originates from a measurement or an attribute that further describes a measurement or the sensor device."/>
    <type value="code"/>
  </property>
  <concept>
    <code value="67925.0"/>
    <display value="Mains power state"/>
    <definition value="Indicates whether the PHD is on or off mains power"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="67925.1"/>
    <display value="Battery state"/>
    <definition value="Indicates whether the PHD is on or off Battery power"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="67925.8"/>
    <display value="Charging at full rate"/>
    <definition
                value="Indicates whether the PHD battery is charging at maximum rate"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="67925.9"/>
    <display value="Charging at trickle rate"/>
    <definition
                value="Indicates whether the PHD battery is charging at a trickle rate"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="67925.10"/>
    <display value="Charging state"/>
    <definition value="Indicates whether the PHD battery charging is on or off"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="532354.0"/>
    <display value="If bit is cleared device is regulated"/>
    <definition value="Indicates whether the device is regulated"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.0"/>
    <display value="Real-time clock"/>
    <definition value="Indicates real time clock is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.1"/>
    <display value="PHG set-time"/>
    <definition value="Indicates support for the PHG to set the time"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.2"/>
    <display value="Relative Time"/>
    <definition value="Indicates Relative Time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.3"/>
    <display value="Hi-Res Relative Time"/>
    <definition value="Indicates Hi-Res Relative Time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.4"/>
    <display value="Sync Absolute Time"/>
    <definition value="Indicates that syncing the absolute time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.5"/>
    <display value="Sync Relative Time"/>
    <definition value="Indicates that syncing the relative time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.6"/>
    <display value="Sync Hi-Res Relative Time"/>
    <definition value="Indicates that syncing hi-res relative time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.7"/>
    <display value="Base Offset Time"/>
    <definition
                value="Indicates that the real-time clock supports base offset time"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.8"/>
    <display value="Absolute Time Synced"/>
    <definition value="Indicates the absolute time has been synced"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.9"/>
    <display value="Relative Time Synced"/>
    <definition value="Indicates the relative time has been synced"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.10"/>
    <display value="Hi-Res Relative Time Synced"/>
    <definition value="Indicates the hi-res time has been synced"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.11"/>
    <display value="PHG Set-Time Requested"/>
    <definition value="PHG Requested to set the time"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.12"/>
    <display value="Syncing base-offset time support"/>
    <definition value="Indicates that syncing base-offset time is supported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.13"/>
    <display value="Base-Offset Time Synced"/>
    <definition value="Indicates that base-offset time has been synced"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.14"/>
    <display value="Base-Offset Time UTC Aligned"/>
    <definition
                value="Indicates that base-offset time is aligned with UTC time standard"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="68219.15"/>
    <display value="Daylight Savings Time Rules Understood"/>
    <definition value="Indicates support for daylight savings time rules"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="attribute"/>
    </property>
  </concept>
  <concept>
    <code value="67846.0"/>
    <display value="All alerts disabled"/>
    <definition
                value="Indicates both the high and the low limit alerts are disabled"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="67846.1"/>
    <display value="Low limit alert disabled"/>
    <definition value="Indicates the low limit alert is disabled"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="67846.2"/>
    <display value="High limit alert disabled"/>
    <definition value="Indicates the high limit alert is disabled"/>
    <property>
      <code value="type"/>
      <valueString value="state"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.0"/>
    <display value="Device not connected to sensor"/>
    <definition value="Indicates the device is not connected with the sensor"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.1"/>
    <display value="Sensor has malfunctioned"/>
    <definition value="Indicates the sensor has malfunctioned"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.2"/>
    <display value="Sensor incorrectly placed on user"/>
    <definition value="Indicates the sensor is not correctly placed on the user"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.3"/>
    <display value="Unsupported sensor"/>
    <definition
                value="Indicates the sensor connected to the device is unsupported"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.4"/>
    <display value="Sensor off"/>
    <definition value="Indicates the sensor is not connected to the user"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.5"/>
    <display value="Sensor interference"/>
    <definition value="Indicates the sensor is experiencing interference"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.6"/>
    <display value="Searching for signal"/>
    <definition value="Indicates the sensor is searching for a signal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.7"/>
    <display value="Signal pulse questionable"/>
    <definition value="Indicates a questionable pulse has been detected"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.8"/>
    <display value="Non pulsatile signal"/>
    <definition value="Indicates a non pulsatile signal has been detected"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.9"/>
    <display value="Signal erratic"/>
    <definition
                value="Indicates a signal has been discovered, but it is erratic"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.10"/>
    <display value="Signal low perfusion"/>
    <definition value="Indicates the signal is experiencing low perfusion"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.11"/>
    <display value="Signal is poor"/>
    <definition value="Indicates the signal has been discovered, but it is poor"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.12"/>
    <display value="Signal inadequate"/>
    <definition
                value="Indicates the signal has been discovered, but it is inadequate"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.13"/>
    <display value="Signal experiencing processing irregularity"/>
    <definition
                value="Indicates the signal has been discovered, but is experiencing processing irregularity"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.14"/>
    <display value="Device malfunction"/>
    <definition value="Indicates a device malfunction has occurred"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150604.15"/>
    <display value="Device extended update"/>
    <definition
                value="Indicates an extended display update is in progress on device"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150605.0"/>
    <display value="Pulse quality nominal"/>
    <definition
                value="Indicates no abnormalities have been detected by the sensor"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150605.1"/>
    <display value="Pulse quality marginal"/>
    <definition value="Indicates the pulse profusion or quality is marginal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150605.2"/>
    <display value="Pulse quality minimal"/>
    <definition value="Indicates the pulse profusion or quality is minimal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="150605.3"/>
    <display value="Pulse quality unacceptable"/>
    <definition value="Indicates the pulse profusion or quality is unacceptable"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.0"/>
    <display value="Lead wire loss"/>
    <definition value="Loss of unspecified lead wire or electrode connection"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.1"/>
    <display value="Lead signal loss"/>
    <definition value="Loss of unspecified lead signal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.2"/>
    <display value="Lead wire loss first-lead"/>
    <definition value="Loss of 1st lead wire or electrode connection"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.3"/>
    <display value="Lead signal loss first-lead"/>
    <definition value="Loss of 1st lead signal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.4"/>
    <display value="Lead wire loss second-lead"/>
    <definition value="Loss of 2nd lead wire or electrode connection"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.5"/>
    <display value="Lead signal loss second-lead"/>
    <definition value="Loss of 2nd lead signal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.6"/>
    <display value="Lead wire loss third-lead"/>
    <definition value="Loss of 3rd lead wire or electrode connection"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8410584.7"/>
    <display value="Lead signal loss third-lead"/>
    <definition value="Loss of 3rd lead signal"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.0"/>
    <display value="Battery low"/>
    <definition value="The device battery is low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.1"/>
    <display value="Sensor malfunction"/>
    <definition value="The sensor has malfunctioned"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.2"/>
    <display value="Not enough blood in sample"/>
    <definition value="The sensor&#39;s sample size is insufficient"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.3"/>
    <display value="Sensor strip insertion"/>
    <definition value="The test strip was inserted incorrectly"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.4"/>
    <display value="Sensor strip type incorrect"/>
    <definition value="The test strip type is incompatable with the sensor"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.5"/>
    <display value="Sensor result too high"/>
    <definition value="The value reported by the sensor is too high"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.6"/>
    <display value="Sensor result too low"/>
    <definition value="The value reported by the sensor is too low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.7"/>
    <display value="Sensor temp too high"/>
    <definition value="The temperature is too high"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.8"/>
    <display value="Sensor temp too low"/>
    <definition value="The temperature is too low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.9"/>
    <display value="Sensor read interrupt"/>
    <definition value="The read process was interrupted"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.10"/>
    <display value="General Device Fault"/>
    <definition value="General Device Fault"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417752.11"/>
    <display value="Sensor temp out of range"/>
    <definition value="The temperature is out of range"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.0"/>
    <display value="INR device battery low"/>
    <definition value="The INR device battery is low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.1"/>
    <display value="Sensor malfunction"/>
    <definition value="The INR device sensor has malfunctioned"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.2"/>
    <display value="Not enough blood in sample"/>
    <definition value="The sample size was insufficient"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.3"/>
    <display value="INR sensor strip insertion"/>
    <definition value="The test script was inserted incorrectly"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.4"/>
    <display value="INR sensor strip type incorrect"/>
    <definition value="The test strip used is not compatible with the INR"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.5"/>
    <display value="INR sensor result too high"/>
    <definition value="The test result is too high"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.6"/>
    <display value="INR sensor result too low"/>
    <definition value="The test result is too low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.7"/>
    <display value="INR sensor temp too high"/>
    <definition value="The temperature is too high"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.8"/>
    <display value="INR sensor temp too low"/>
    <definition value="The temperature is too low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.9"/>
    <display value="INR sensor read interrupt"/>
    <definition value="The read process was  interrupted"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.10"/>
    <display value="INR device general fault"/>
    <definition value="General device fault"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8417909.11"/>
    <display value="INR sensor calibration due"/>
    <definition value="The INR sensor calibration is due"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.0"/>
    <display value="Undetermined device status"/>
    <definition value="Undetermined device status event"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.1"/>
    <display value="Device status reset"/>
    <definition value="Device reset"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.5"/>
    <display value="Device status error"/>
    <definition value="Device error"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.6"/>
    <display value="Device status error mechanical"/>
    <definition value="Mechanical error"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.7"/>
    <display value="Device status error electronic"/>
    <definition value="Electronic error"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.8"/>
    <display value="Device status error software"/>
    <definition value="Software error"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.9"/>
    <display value="Device status error battery"/>
    <definition value="Battery error"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.15"/>
    <display value="Device status service"/>
    <definition value="Undetermined device status event"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.16"/>
    <display value="Device status service time-sync required"/>
    <definition value="Time sync service required"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.17"/>
    <display value="Device status service calibration required"/>
    <definition value="Calibration required"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.18"/>
    <display value="Device status service replentishment required"/>
    <definition value="Replentishment required"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.25"/>
    <display value="Device status battery low"/>
    <definition value="Battery power is too low"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.26"/>
    <display value="Device status battery depleted"/>
    <definition value="Battery is depleted"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.27"/>
    <display value="Device status battery replaced"/>
    <definition value="Battery has been replaced"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8408608.28"/>
    <display value="Device status battery interrupted"/>
    <definition value="Battery was interrupted"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.0"/>
    <display value="Sensor session stopped"/>
    <definition value="Session stopped"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.2"/>
    <display value="Sensor type incorrect"/>
    <definition value="Sensor type incorrect for device"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.3"/>
    <display value="Sensor malfunction"/>
    <definition value="The sensor malfunctioned"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.4"/>
    <display value="Device specific alert"/>
    <definition value="Device specific alert"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.7"/>
    <display value="Sensor calibration not allowed"/>
    <definition value="Calibrating the sensor is not allowed"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.8"/>
    <display value="Sensor calibration recommended"/>
    <definition value="Calibrating the sensor is recommended"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.9"/>
    <display value="Sensor calibration required"/>
    <definition value="Calibrating the sensor is required"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.10"/>
    <display value="Sensor temp too high"/>
    <definition value="Temperature is too high for a valid result"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.11"/>
    <display value="Sensor temp too low"/>
    <definition value="Temperature is too low for a valid result"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.12"/>
    <display value="Sensor result below patient level"/>
    <definition value="Sensor result below the Patient Low level"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.13"/>
    <display value="Sensor result above patient level"/>
    <definition value="Sensor result above the Patient High level"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.14"/>
    <display value="Sensor low hypo"/>
    <definition value="Sensor result below the Hypo level"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.15"/>
    <display value="Sensor result hyper"/>
    <definition value="Sensor result above the Hyper level"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.16"/>
    <display value="Sensor rate decrease exceeded"/>
    <definition value="The sensor rate of decrease has been exceeded"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.17"/>
    <display value="Sensor rate increase exceeded"/>
    <definition value="The sensor rate of increase has been exceeded"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.18"/>
    <display value="Sensor result too low"/>
    <definition value="Sensor result is lower than the device can process"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.19"/>
    <display value="Sensor result too high"/>
    <definition value="Sensor result is higher than the device can process"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
  <concept>
    <code value="8418060.20"/>
    <display value="Sensor com out of range"/>
    <definition value="The sensor communication is out of range"/>
    <property>
      <code value="type"/>
      <valueString value="event"/>
    </property>
    <property>
      <code value="source"/>
      <valueString value="measurement"/>
    </property>
  </concept>
</CodeSystem>