Vital Records Common Library (VRCL) STU2-ballot
2.0.0-ballot - ballot United States of America flag

This page is part of the Vital Records Common Profile Library (v2.0.0-ballot: STU 2 Ballot 1) based on FHIR (HL7® FHIR® Standard) R4. The current version which supersedes this version is 1.1.0. For a full list of available versions, see the Directory of published versions

Resource Profile: PatientVitalRecords - Detailed Descriptions

Draft as of 2023-12-16

Definitions for the Patient-vr resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Patient
2. Patient.extension:birthPlace
Slice NamebirthPlace
ShortPlace of Birth for the patient should include the state and/or country
Control0..1
TypeExtension(Birth Place) (Extension Type: Address)
4. Patient.extension:birthPlace.value[x]
[x] NoteSee Choice of Data Types for further information about how to use [x]
6. Patient.extension:birthPlace.value[x].city
8. Patient.extension:birthPlace.value[x].city.extension
SlicingThis element introduces a set of slices on Patient.extension.value[x].city.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
10. Patient.extension:birthPlace.value[x].city.extension:cityCode
Slice NamecityCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

Control0..1
TypeExtension(Extension - City Code Vital Records) (Extension Type: positiveInt)
12. Patient.extension:birthPlace.value[x].district
14. Patient.extension:birthPlace.value[x].district.extension
SlicingThis element introduces a set of slices on Patient.extension.value[x].district.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Patient.extension:birthPlace.value[x].district.extension:districtCode
Slice NamedistrictCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCounty code
Control0..1
TypeExtension(Extension - District Code Vital Records) (Extension Type: positiveInt)
LabelCounty code
18. Patient.extension:birthPlace.value[x].state
BindingThe codes SHALL be taken from ValueSet - Jurisdictions Vital Records
20. Patient.extension:birthPlace.value[x].country
BindingThe codes SHALL be taken from ValueSet - Birthplace Country Vital Records
22. Patient.extension:parentReportedAgeAtDelivery
Slice NameparentReportedAgeAtDelivery
Control0..2
TypeExtension(Extension - Reported Parent Age At Delivery - Vital Records) (Complex Extension)
24. Patient.extension:fetalDeath
Slice NamefetalDeath
Control0..1
TypeExtension(Extension - Patient Fetal Death - Vital Records) (Extension Type: Coding)
26. Patient.identifier
NoteThis is a business identifier, not a resource identifier (see discussion)
LOINC Code
SlicingThis element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
28. Patient.identifier:MRN
Slice NameMRN
ShortMedical Record Number
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
30. Patient.identifier:MRN.type
Control1..?
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;MR&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
32. Patient.identifier:SSN
Slice NameSSN
ShortSSN if available and appropriate to send
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
34. Patient.identifier:SSN.type
Control1..?
Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;SS&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
36. Patient.identifier:SSN.system
Pattern Valuehttp://hl7.org/fhir/sid/us-ssn
38. Patient.name
LOINC Code
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ use
40. Patient.name.use
Control1..?
LOINC Code
42. Patient.name.family
Control1..?
LOINC Code
44. Patient.name.family.extension
SlicingThis element introduces a set of slices on Patient.name.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
46. Patient.name.family.extension:dataAbsentReason
Slice NamedataAbsentReason
Control0..1
TypeExtension(Why value is missing) (Extension Type: code)
48. Patient.name.given
50. Patient.name.given.extension
SlicingThis element introduces a set of slices on Patient.name.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
52. Patient.name.given.extension:dataAbsentReason
Slice NamedataAbsentReason
Control0..1
TypeExtension(Why value is missing) (Extension Type: code)
54. Patient.name:currentLegalName
Slice NamecurrentLegalName
Shortcurrent legal name
Control0..1
56. Patient.name:currentLegalName.use
Control1..?
Fixed Valueofficial
58. Patient.name:currentLegalName.family
Control1..?
60. Patient.name:namePriorToFirstMarriage
Slice NamenamePriorToFirstMarriage
ShortName prior to first marriage
Control0..1
62. Patient.name:namePriorToFirstMarriage.use
Control1..?
Fixed Valuemaiden
64. Patient.name:namePriorToFirstMarriage.family
Control1..?
66. Patient.birthDate
68. Patient.birthDate.extension
SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
70. Patient.birthDate.extension:partialDateTime
Slice NamepartialDateTime
Definition

Alternative component representation of partial date and time. See [note on birth date and time].

ShortpartialDateTIme
Control0..1
TypeExtension(Extension - Partial Date Time Vital Records) (Complex Extension)
72. Patient.birthDate.extension:birthTime
Slice NamebirthTime
Control0..1
TypeExtension(Birth Time) (Extension Type: dateTime)
74. Patient.birthDate.extension:bypassEditFlag
Slice NamebypassEditFlag
Control0..1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
76. Patient.birthDate.extension:bypassEditFlag.value[x]
ShortTo reflect the relevant edit possibilities for date of birth.
BindingThe codes SHALL be taken from ValueSet - Mothers Date of Birth Edit Flags (NCHS) Vital Records

Date of Birth Edit Flags (NCHS)

[x] NoteSee Choice of Data Types for further information about how to use [x]
78. Patient.address
80. Patient.address.extension:withinCityLimitsIndicator
Slice NamewithinCityLimitsIndicator
Definition

Used to indicate whether or not an address is within city limits.

ShortUsed to indicate whether or not an address is within city limits.
Control0..1
TypeExtension(Extension - Within City Limits Indicator Vital Records) (Extension Type: Coding)
82. Patient.address.extension:predir
Slice Namepredir
Control0..1
TypeExtension(Extension - PreDirectional Vital Records) (Extension Type: string)
84. Patient.address.extension:stnum
Slice Namestnum
Control0..1
TypeExtension(Extension - StreetNumber Vital Records) (Extension Type: string)
86. Patient.address.extension:stname
Slice Namestname
Control0..1
TypeExtension(Extension - StreetName Vital Records) (Extension Type: string)
88. Patient.address.extension:stdesig
Slice Namestdesig
Control0..1
TypeExtension(Extension - StreetDesignator Vital Records) (Extension Type: string)
90. Patient.address.extension:postdir
Slice Namepostdir
Control0..1
TypeExtension(Extension - PostDirectional Vital Records) (Extension Type: string)
92. Patient.address.extension:unitnumber
Slice Nameunitnumber
Control0..1
TypeExtension(Extension - UnitOrAptNumber Vital Records) (Extension Type: string)
94. Patient.address.city
96. Patient.address.city.extension
SlicingThis element introduces a set of slices on Patient.address.city.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
98. Patient.address.city.extension:cityCode
Slice NamecityCode
Definition

Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCity Code
Control0..1
TypeExtension(Extension - City Code Vital Records) (Extension Type: positiveInt)
LabelCity Code
100. Patient.address.district
102. Patient.address.district.extension
SlicingThis element introduces a set of slices on Patient.address.district.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
104. Patient.address.district.extension:districtCode
Slice NamedistrictCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCounty code
Control0..1
TypeExtension(Extension - District Code Vital Records) (Extension Type: positiveInt)
LabelCounty code
106. Patient.address.state
BindingThe codes SHALL be taken from ValueSet - States, Territories and Provinces Vital Records
LOINC Code
108. Patient.address.country
BindingThe codes SHALL be taken from ValueSet - Residence Country Vital Records
LOINC Code
110. Patient.multipleBirth[x]
Definition

If not single birth, specify born 1st, 2nd, etc. – For multiple deliveries, the order this infant was delivered in the set. Include all live births and fetal losses.

ShortIf not single birth - born first, second, third, etc.
[x] NoteSee Choice of Data Types for further information about how to use [x]
LOINC Code
112. Patient.multipleBirth[x].extension:bypassEditFlag
Slice NamebypassEditFlag
Control0..1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
114. Patient.multipleBirth[x].extension:bypassEditFlag.value[x]
BindingThe codes SHALL be taken from ValueSet - Plurality Edit Flags (NCHS) Vital Records

Plurality Edit Flags (NCHS)

[x] NoteSee Choice of Data Types for further information about how to use [x]
116. Patient.multipleBirth[x].extension:multipleBirthTotal
Slice NamemultipleBirthTotal
Definition

Where a patient is a part of a multiple delivery, this is the total number of deliveries that occurred in this pregnancy.

Control0..1
TypeExtension(Patient Multiple Birth Total) (Extension Type: positiveInt)

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

-


Demographics and other administrative information about an individual or animal receiving care or other health-related services.

ShortInformation about an individual or animal receiving health care services
Comments

-

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
us-core-6: Either Patient.name.given and/or Patient.name.family SHALL be present or a Data Absent Reason Extension SHALL be present. ((name.family.exists() or name.given.exists()) xor extension.where(url='http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
2. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Patient.extension:race
Slice Namerace
Definition

Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The race codes used to represent these concepts are based upon the CDC Race and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 921 reference race. The race concepts are grouped by and pre-mapped to the 5 OMB race categories:

  • American Indian or Alaska Native
  • Asian
  • Black or African American
  • Native Hawaiian or Other Pacific Islander
  • White.
ShortUS Core Race Extension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Race Extension) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
6. Patient.extension:ethnicity
Slice Nameethnicity
Definition

Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The ethnicity codes used to represent these concepts are based upon the CDC ethnicity and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 43 reference ethnicity. The ethnicity concepts are grouped by and pre-mapped to the 2 OMB ethnicity categories: - Hispanic or Latino - Not Hispanic or Latino.

ShortUS Core ethnicity Extension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Ethnicity Extension) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
8. Patient.extension:birthsex
Slice Namebirthsex
Definition

A code classifying the person's sex assigned at birth as specified by the Office of the National Coordinator for Health IT (ONC).

ShortExtension
Comments

The codes required are intended to present birth sex (i.e., the sex recorded on the patient’s birth certificate) and not gender identity or reassigned sex.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Birth Sex Extension) (Extension Type: code)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
10. Patient.extension:genderIdentity
Slice NamegenderIdentity
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Gender Identity Extension) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
12. Patient.extension:birthPlace
Slice NamebirthPlace
Definition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

ShortPlace of Birth for the patient should include the state and/or country
Control0..1
TypeExtension(Birth Place) (Extension Type: Address)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
14. Patient.extension:birthPlace.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Patient.extension:birthPlace.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/patient-birthPlace
18. Patient.extension:birthPlace.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).


Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control10..1
TypeAddress, date, Meta, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Patient.extension:birthPlace.value[x].use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1

The use of an address.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Patient.extension:birthPlace.value[x].state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHALL be taken from For codes, see ValueSet - Jurisdictions Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
24. Patient.extension:birthPlace.value[x].country
Definition

Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
BindingThe codes SHALL be taken from For codes, see ValueSet - Birthplace Country Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Patient.extension:parentReportedAgeAtDelivery
Slice NameparentReportedAgeAtDelivery
Definition

This Extension profile represents the reported age of the parent at the delivery time of the newborn or fetus. A required code indicates whether the mother or father's age is provided. It can optionally contain a reference to the reporter (US Core Patient Profile or US Core RelatedPerson Profile).

ShortExtension - Reported Parent Age at Delivery - Vital Records
Control0..2
TypeExtension(Extension - Reported Parent Age At Delivery - Vital Records) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
28. Patient.extension:fetalDeath
Slice NamefetalDeath
Definition

An indicator that the status of the patient is fetal death.

Shortfetal-death
Control0..1
TypeExtension(Extension - Patient Fetal Death - Vital Records) (Extension Type: Coding)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
30. Patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
32. Patient.identifier
Definition

An identifier for this patient.

ShortAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control10..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
34. Patient.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Patient.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Patient.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Patient.identifier:MRN
Slice NameMRN
Definition

An identifier for this patient.

ShortMedical Record NumberAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Patient.identifier:MRN.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Patient.identifier:MRN.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control10..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;MR&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Patient.identifier:MRN.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Patient.identifier:MRN.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Patient.identifier:SSN
Slice NameSSN
Definition

An identifier for this patient.

ShortSSN if available and appropriate to sendAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
52. Patient.identifier:SSN.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUsehttp://hl7.org/fhir/ValueSet/identifier-use|4.0.1

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Patient.identifier:SSN.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control10..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codeshttp://hl7.org/fhir/ValueSet/identifier-type

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;SS&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Patient.identifier:SSN.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control10..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Valuehttp://hl7.org/fhir/sid/us-ssn
Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.identifier:SSN.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

ShortWhether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Patient.name
Definition

A name associated with the individual.

ShortA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control10..*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ use
64. Patient.name.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control10..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Patient.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.name.family.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
70. Patient.name.family.extension:dataAbsentReason
Slice NamedataAbsentReason
Definition

Provides a reason why the expected value or elements in the element that is extended are missing.

Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Why value is missing) (Extension Type: code)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
72. Patient.name.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Patient.name.given.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
76. Patient.name.given.extension:dataAbsentReason
Slice NamedataAbsentReason
Definition

Provides a reason why the expected value or elements in the element that is extended are missing.

Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Why value is missing) (Extension Type: code)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
78. Patient.name:currentLegalName
Slice NamecurrentLegalName
Definition

A name associated with the individual.

Shortcurrent legal nameA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control0..1*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Patient.name:currentLegalName.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control10..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Fixed Valueofficial
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
82. Patient.name:currentLegalName.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Patient.name:currentLegalName.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Patient.name:namePriorToFirstMarriage
Slice NamenamePriorToFirstMarriage
Definition

A name associated with the individual.

ShortName prior to first marriageA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control0..1*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Patient.name:namePriorToFirstMarriage.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control10..1
BindingThe codes SHALL be taken from NameUsehttp://hl7.org/fhir/ValueSet/name-use|4.0.1

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Fixed Valuemaiden
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Patient.name:namePriorToFirstMarriage.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control10..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.name:namePriorToFirstMarriage.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.telecom
Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

ShortA contact detail for the individual
Comments

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Patient.telecom.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other
Control10..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystemhttp://hl7.org/fhir/ValueSet/contact-point-system|4.0.1

Telecommunications form for contact point.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Patient.telecom.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

ShortThe actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Control10..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.telecom.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUsehttp://hl7.org/fhir/ValueSet/contact-point-use|4.0.1
Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
102. Patient.gender
Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Control10..1
BindingThe codes SHALL be taken from AdministrativeGenderhttp://hl7.org/fhir/ValueSet/administrative-gender|4.0.1
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
104. Patient.birthDate
Definition

The date of birth for the individual.

ShortThe date of birth for the individual
Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Age of the individual drives many clinical processes.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
LOINC Code21112-8
106. Patient.birthDate.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
108. Patient.birthDate.extension:partialDateTime
Slice NamepartialDateTime
Definition

Alternative component representation of partial date and time. See [note on birth date and time].

ShortpartialDateTIme
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - Partial Date Time Vital Records) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
110. Patient.birthDate.extension:birthTime
Slice NamebirthTime
Definition

The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively.

ShortTime of day of birth
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Birth Time) (Extension Type: dateTime)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
112. Patient.birthDate.extension:bypassEditFlag
Slice NamebypassEditFlag
Definition

Extension to hold a codeable concept from one of several valuesets.

ShortExtension - BypassEditFlag Vital Records
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
114. Patient.birthDate.extension:bypassEditFlag.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.birthDate.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
116. Patient.birthDate.extension:bypassEditFlag.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/us/vr-common-library/StructureDefinition/BypassEditFlag
118. Patient.birthDate.extension:bypassEditFlag.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortTo reflect the relevant edit possibilities for date of birth.Value of extension
Control10..1
BindingThe codes SHALL be taken from For codes, see ValueSet - Mothers Date of Birth Edit Flags (NCHS) Vital Records

Date of Birth Edit Flags (NCHS)

TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
120. Patient.deceased[x]
Definition

Indicates if the individual is deceased or not.

ShortIndicates if the individual is deceased or not
Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Patient.address
Definition

An address for the individual.

ShortAn address for the individual
Comments

Patient may have multiple addresses with different uses or applicable periods.

Control0..*
TypeAddress
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Patient.address.extension:withinCityLimitsIndicator
Slice NamewithinCityLimitsIndicator
Definition

Used to indicate whether or not an address is within city limits.

ShortUsed to indicate whether or not an address is within city limits.
Control0..1
TypeExtension(Extension - Within City Limits Indicator Vital Records) (Extension Type: Coding)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
126. Patient.address.extension:predir
Slice Namepredir
Definition

PreDirectional component of address as defined by USPS

ShortExtension - PreDirectional Vital Records
Control0..1
TypeExtension(Extension - PreDirectional Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
128. Patient.address.extension:stnum
Slice Namestnum
Definition

StreetNumber component of address as defined by USPS

ShortExtension - StreetNumber Vital Records
Control0..1
TypeExtension(Extension - StreetNumber Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
130. Patient.address.extension:stname
Slice Namestname
Definition

StreetName component of address as defined by USPS

ShortExtension - StreetName Vital Records
Control0..1
TypeExtension(Extension - StreetName Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
132. Patient.address.extension:stdesig
Slice Namestdesig
Definition

StreetDesignator component of address as defined by USPS

ShortExtension - StreetDesignator Vital Records
Control0..1
TypeExtension(Extension - StreetDesignator Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
134. Patient.address.extension:postdir
Slice Namepostdir
Definition

PostDirectional component of address as defined by USPS

ShortExtension - PostDirectional Vital Records
Control0..1
TypeExtension(Extension - PostDirectional Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
136. Patient.address.extension:unitnumber
Slice Nameunitnumber
Definition

UnitOrAptNumber component of address as defined by USPS

ShortExtension - UnitOrAptNumber Vital Records
Control0..1
TypeExtension(Extension - UnitOrAptNumber Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
138. Patient.address.use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUsehttp://hl7.org/fhir/ValueSet/address-use|4.0.1

The use of an address.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
140. Patient.address.line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

ShortStreet name, number, direction & P.O. Box etc.
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. Patient.address.city
Definition

The name of the city, town, suburb, village or other community or delivery center.

ShortName of city, town etc.
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Patient.address.city.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.address.city.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
146. Patient.address.city.extension:cityCode
Slice NamecityCode
Definition

Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCity Code
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - City Code Vital Records) (Extension Type: positiveInt)
Is Modifierfalse
LabelCity Code
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
148. Patient.address.state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHALL be taken from For codes, see ValueSet - States, Territories and Provinces Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
150. Patient.address.postalCode
Definition

A postal code designating a region defined by the postal service.

ShortUS Zip CodesPostal code for area
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesZip, Zip Code
Example<br/><b>General</b>:9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
152. Patient.address.country
Definition

Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
BindingThe codes SHALL be taken from For codes, see ValueSet - Residence Country Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Patient.address.period
Definition

Time period when address was/is in use.

ShortTime period when address was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows addresses to be placed in historical context.

Example<br/><b>General</b>:&lt;valuePeriod&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;start&nbsp;value=&quot;2010-03-23&quot;/&gt;<br/>&nbsp;&nbsp;&lt;end&nbsp;value=&quot;2010-07-01&quot;/&gt;<br/>&lt;/valuePeriod&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
156. Patient.multipleBirth[x]
Definition

If not single birth, specify born 1st, 2nd, etc. – For multiple deliveries, the order this infant was delivered in the set. Include all live births and fetal losses.


Indicates whether the patient is part of a multiple (boolean) or indicates the actual birth order (integer).

ShortIf not single birth - born first, second, third, etc.Whether patient is part of a multiple birth
Comments

Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

Control0..1
TypeChoice of: boolean, integer
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Patient.multipleBirth[x].extension:bypassEditFlag
Slice NamebypassEditFlag
Definition

Extension to hold a codeable concept from one of several valuesets.

ShortExtension - BypassEditFlag Vital Records
Control0..1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
160. Patient.multipleBirth[x].extension:bypassEditFlag.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..0*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.multipleBirth[x].extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
162. Patient.multipleBirth[x].extension:bypassEditFlag.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/us/vr-common-library/StructureDefinition/BypassEditFlag
164. Patient.multipleBirth[x].extension:bypassEditFlag.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control10..1
BindingThe codes SHALL be taken from For codes, see ValueSet - Plurality Edit Flags (NCHS) Vital Records

Plurality Edit Flags (NCHS)

TypeCodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
166. Patient.multipleBirth[x].extension:multipleBirthTotal
Slice NamemultipleBirthTotal
Definition

Where a patient is a part of a multiple delivery, this is the total number of deliveries that occurred in this pregnancy.

ShortTotal births in this pregnancy
Control0..1
TypeExtension(Patient Multiple Birth Total) (Extension Type: positiveInt)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
LOINC Code
168. Patient.communication
Definition

A language which may be used to communicate with the patient about his or her health.

ShortA language which may be used to communicate with the patient about his or her health
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Patient.communication.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
172. Patient.communication.language
Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

ShortThe language which can be used to communicate with the patient about his or her health
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from Language codes with language and optionally a region modifierhttp://hl7.org/fhir/ValueSet/languages
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Patient.link
Definition

Link to another patient resource that concerns the same actual patient.

ShortLink to another patient resource that concerns the same actual person
Comments

There is no assumption that linked patient records have mutual links.

Control0..*
TypeBackboneElement
Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
Summarytrue
Requirements

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
176. Patient.link.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
178. Patient.link.other
Definition

The other patient resource that the link refers to.

ShortThe other patient or related person resource that the link refers to
Comments

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Control1..1
TypeReference(Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Patient.link.type
Definition

The type of link between this patient resource and another patient resource.

Shortreplaced-by | replaces | refer | seealso
Control1..1
BindingThe codes SHALL be taken from LinkTypehttp://hl7.org/fhir/ValueSet/link-type|4.0.1

The type of link between this patient resource and another patient resource.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Patient
Definition

-

ShortInformation about an individual or animal receiving health care services
Comments

-

Control0..*
Is Modifierfalse
Must Supportfalse
Summaryfalse
Alternate NamesSubjectOfCare Client Resident
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
us-core-6: Either Patient.name.given and/or Patient.name.family SHALL be present or a Data Absent Reason Extension SHALL be present. ((name.family.exists() or name.given.exists()) xor extension.where(url='http://hl7.org/fhir/StructureDefinition/data-absent-reason').exists())
2. Patient.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Summarytrue
4. Patient.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Patient.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Patient.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Patient.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Patient.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Patient.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
16. Patient.extension:race
Slice Namerace
Definition

Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The race codes used to represent these concepts are based upon the CDC Race and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 921 reference race. The race concepts are grouped by and pre-mapped to the 5 OMB race categories:

  • American Indian or Alaska Native
  • Asian
  • Black or African American
  • Native Hawaiian or Other Pacific Islander
  • White.
ShortUS Core Race Extension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Race Extension) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Patient.extension:ethnicity
Slice Nameethnicity
Definition

Concepts classifying the person into a named category of humans sharing common history, traits, geographical origin or nationality. The ethnicity codes used to represent these concepts are based upon the CDC ethnicity and Ethnicity Code Set Version 1.0 which includes over 900 concepts for representing race and ethnicity of which 43 reference ethnicity. The ethnicity concepts are grouped by and pre-mapped to the 2 OMB ethnicity categories: - Hispanic or Latino - Not Hispanic or Latino.

ShortUS Core ethnicity Extension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Ethnicity Extension) (Complex Extension)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Patient.extension:birthsex
Slice Namebirthsex
Definition

A code classifying the person's sex assigned at birth as specified by the Office of the National Coordinator for Health IT (ONC).

ShortExtension
Comments

The codes required are intended to present birth sex (i.e., the sex recorded on the patient’s birth certificate) and not gender identity or reassigned sex.

Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Birth Sex Extension) (Extension Type: code)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Patient.extension:genderIdentity
Slice NamegenderIdentity
Definition

An Extension

ShortExtension
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(US Core Gender Identity Extension) (Extension Type: CodeableConcept)
Is Modifierfalse
Must Supportfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Patient.extension:birthPlace
Slice NamebirthPlace
Definition

The registered place of birth of the patient. A sytem may use the address.text if they don't store the birthPlace address in discrete elements.

ShortPlace of Birth for the patient should include the state and/or country
Control0..1
TypeExtension(Birth Place) (Extension Type: Address)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Patient.extension:birthPlace.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
28. Patient.extension:birthPlace.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
30. Patient.extension:birthPlace.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/StructureDefinition/patient-birthPlace
32. Patient.extension:birthPlace.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control1..1
TypeAddress
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Patient.extension:birthPlace.value[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
36. Patient.extension:birthPlace.value[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.value[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
38. Patient.extension:birthPlace.value[x].use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUse

The use of an address.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
40. Patient.extension:birthPlace.value[x].type
Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

Shortpostal | physical | both
Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

Control0..1
BindingThe codes SHALL be taken from AddressType

The type of an address (physical / postal).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:both
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
42. Patient.extension:birthPlace.value[x].text
Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

ShortText representation of the address
Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Patient.extension:birthPlace.value[x].line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

ShortStreet name, number, direction & P.O. Box etc.
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Patient.extension:birthPlace.value[x].city
Definition

The name of the city, town, suburb, village or other community or delivery center.

ShortName of city, town etc.
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
48. Patient.extension:birthPlace.value[x].city.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
50. Patient.extension:birthPlace.value[x].city.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.value[x].city.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
52. Patient.extension:birthPlace.value[x].city.extension:cityCode
Slice NamecityCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortExtension - City Code Vital Records
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - City Code Vital Records) (Extension Type: positiveInt)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
54. Patient.extension:birthPlace.value[x].city.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
56. Patient.extension:birthPlace.value[x].district
Definition

The name of the administrative area (county).

ShortDistrict name (aka county)
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesCounty
Example<br/><b>General</b>:Madison
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
58. Patient.extension:birthPlace.value[x].district.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
60. Patient.extension:birthPlace.value[x].district.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.extension.value[x].district.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
62. Patient.extension:birthPlace.value[x].district.extension:districtCode
Slice NamedistrictCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCounty code
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - District Code Vital Records) (Extension Type: positiveInt)
Is Modifierfalse
LabelCounty code
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
64. Patient.extension:birthPlace.value[x].district.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
66. Patient.extension:birthPlace.value[x].state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHALL be taken from ValueSet - Jurisdictions Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
68. Patient.extension:birthPlace.value[x].postalCode
Definition

A postal code designating a region defined by the postal service.

ShortPostal code for area
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesZip
Example<br/><b>General</b>:9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Patient.extension:birthPlace.value[x].country
Definition

Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
BindingThe codes SHALL be taken from ValueSet - Birthplace Country Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Patient.extension:birthPlace.value[x].period
Definition

Time period when address was/is in use.

ShortTime period when address was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Requirements

Allows addresses to be placed in historical context.

Example<br/><b>General</b>:&lt;valuePeriod&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;start&nbsp;value=&quot;2010-03-23&quot;/&gt;<br/>&nbsp;&nbsp;&lt;end&nbsp;value=&quot;2010-07-01&quot;/&gt;<br/>&lt;/valuePeriod&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
74. Patient.extension:parentReportedAgeAtDelivery
Slice NameparentReportedAgeAtDelivery
Definition

This Extension profile represents the reported age of the parent at the delivery time of the newborn or fetus. A required code indicates whether the mother or father's age is provided. It can optionally contain a reference to the reporter (US Core Patient Profile or US Core RelatedPerson Profile).

ShortExtension - Reported Parent Age at Delivery - Vital Records
Control0..2
TypeExtension(Extension - Reported Parent Age At Delivery - Vital Records) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. Patient.extension:fetalDeath
Slice NamefetalDeath
Definition

An indicator that the status of the patient is fetal death.

Shortfetal-death
Control0..1
TypeExtension(Extension - Patient Fetal Death - Vital Records) (Extension Type: Coding)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
78. Patient.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Patient.identifier
Definition

An identifier for this patient.

ShortAn identifier for this patient
NoteThis is a business identifier, not a resource identifier (see discussion)
Control1..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.identifier. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ type
82. Patient.identifier.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
84. Patient.identifier.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
86. Patient.identifier.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
88. Patient.identifier.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control0..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Patient.identifier.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Patient.identifier.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
94. Patient.identifier.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Patient.identifier.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
98. Patient.identifier:MRN
Slice NameMRN
Definition

An identifier for this patient.

ShortMedical Record Number
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..*
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
100. Patient.identifier:MRN.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
102. Patient.identifier:MRN.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
104. Patient.identifier:MRN.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Patient.identifier:MRN.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;MR&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
108. Patient.identifier:MRN.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
110. Patient.identifier:MRN.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
112. Patient.identifier:MRN.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
114. Patient.identifier:MRN.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Patient.identifier:SSN
Slice NameSSN
Definition

An identifier for this patient.

ShortSSN if available and appropriate to send
NoteThis is a business identifier, not a resource identifier (see discussion)
Control0..1
TypeIdentifier
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Patients are almost always assigned specific numerical identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
118. Patient.identifier:SSN.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
120. Patient.identifier:SSN.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.identifier.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
122. Patient.identifier:SSN.use
Definition

The purpose of this identifier.

Shortusual | official | temp | secondary | old (If known)
Comments

Applications can assume that an identifier is permanent unless it explicitly says that it is temporary.

Control0..1
BindingThe codes SHALL be taken from IdentifierUse

Identifies the purpose for this identifier, if known .

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary id for a permanent one.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate identifier for a particular context of use to be selected from among a set of identifiers.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
124. Patient.identifier:SSN.type
Definition

A coded type for the identifier that can be used to determine which identifier to use for a specific purpose.

ShortDescription of identifier
Comments

This element deals only with general categories of identifiers. It SHOULD not be used for codes that correspond 1..1 with the Identifier.system. Some identifiers may fall into multiple categories due to common usage. Where the system is known, a type is unnecessary because the type is always part of the system definition. However systems often need to handle identifiers where the system is not known. There is not a 1:1 relationship between type and system, since many different systems have the same type.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from Identifier Type Codes

A coded type for an identifier that can be used to determine which identifier to use for a specific purpose.

TypeCodeableConcept
Is Modifierfalse
Summarytrue
Requirements

Allows users to make use of identifiers when the identifier system is not known.

Pattern Value&lt;valueCodeableConcept&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;coding&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;system&nbsp;value=&quot;http://terminology.hl7.org/CodeSystem/v2-0203&quot;/&gt;<br/>&nbsp;&nbsp;&nbsp;&nbsp;&lt;code&nbsp;value=&quot;SS&quot;/&gt;<br/>&nbsp;&nbsp;&lt;/coding&gt;<br/>&lt;/valueCodeableConcept&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
126. Patient.identifier:SSN.system
Definition

Establishes the namespace for the value - that is, a URL that describes a set values that are unique.

ShortThe namespace for the identifier value
Comments

Identifier.system is always case sensitive.

Control1..1
Typeuri
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

There are many sets of identifiers. To perform matching of two identifiers, we need to know what set we're dealing with. The system identifies a particular set of unique identifiers.

Pattern Valuehttp://hl7.org/fhir/sid/us-ssn
Example<br/><b>General</b>:http://www.acme.com/identifiers/patient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Patient.identifier:SSN.value
Definition

The portion of the identifier typically relevant to the user and which is unique within the context of the system.

ShortThe value that is unique within the system.
Comments

If the value is a full URI, then the system SHALL be urn:ietf:rfc:3986. The value's primary purpose is computational mapping. As a result, it may be normalized for comparison purposes (e.g. removing non-significant whitespace, dashes, etc.) A value formatted for human display can be conveyed using the Rendered Value extension. Identifier.value is to be treated as case sensitive unless knowledge of the Identifier.system allows the processer to be confident that non-case-sensitive processing is safe.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:123456
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
130. Patient.identifier:SSN.period
Definition

Time period during which identifier is/was valid for use.

ShortTime period when id is/was valid for use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Patient.identifier:SSN.assigner
Definition

Organization that issued/manages the identifier.

ShortOrganization that issued id (may be just text)
Comments

The Identifier.assigner may omit the .reference element and only contain a .display element reflecting the name or other textual information about the assigning organization.

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
134. Patient.active
Definition

Whether this patient record is in active use. Many systems use this property to mark as non-current patients, such as those that have not been seen for a period of time based on an organization's business rules.

It is often used to filter patient lists to exclude inactive patients

Deceased patients may also be marked as inactive for the same reasons, but may be active for some time after death.

ShortWhether this patient's record is in active use
Comments

If a record is inactive, and linked to an active record, then future patient/record updates should occur on the other patient.

Control0..1
Typeboolean
Is Modifiertrue because This element is labelled as a modifier because it is a status element that can indicate that a record should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Need to be able to mark a patient record as not to be used because it was created in error.

Meaning if MissingThis resource is generally assumed to be active if no value is provided for the active element
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
136. Patient.name
Definition

A name associated with the individual.

ShortA name associated with the patient
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control1..*
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
SlicingThis element introduces a set of slices on Patient.name. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ use
138. Patient.name.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
140. Patient.name.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
142. Patient.name.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control1..1
BindingThe codes SHALL be taken from NameUse

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
144. Patient.name.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
146. Patient.name.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control1..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Patient.name.family.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
150. Patient.name.family.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.family.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
152. Patient.name.family.extension:dataAbsentReason
Slice NamedataAbsentReason
Definition

Provides a reason why the expected value or elements in the element that is extended are missing.

Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Why value is missing) (Extension Type: code)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
154. Patient.name.family.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
156. Patient.name.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Patient.name.given.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
160. Patient.name.given.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.given.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
162. Patient.name.given.extension:dataAbsentReason
Slice NamedataAbsentReason
Definition

Provides a reason why the expected value or elements in the element that is extended are missing.

Shortunknown | asked | temp | notasked | masked | unsupported | astext | error
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Why value is missing) (Extension Type: code)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
164. Patient.name.given.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
166. Patient.name.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
168. Patient.name.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
170. Patient.name.period
Definition

Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
172. Patient.name:currentLegalName
Slice NamecurrentLegalName
Definition

A name associated with the individual.

Shortcurrent legal name
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control0..1
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
174. Patient.name:currentLegalName.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
176. Patient.name:currentLegalName.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
178. Patient.name:currentLegalName.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control1..1
BindingThe codes SHALL be taken from NameUse

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Fixed Valueofficial
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
180. Patient.name:currentLegalName.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
182. Patient.name:currentLegalName.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control1..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
184. Patient.name:currentLegalName.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
186. Patient.name:currentLegalName.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
188. Patient.name:currentLegalName.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
190. Patient.name:currentLegalName.period
Definition

Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
192. Patient.name:namePriorToFirstMarriage
Slice NamenamePriorToFirstMarriage
Definition

A name associated with the individual.

ShortName prior to first marriage
Comments

A patient may have multiple names with different uses or applicable periods. For animals, the name is a "HumanName" in the sense that is assigned and used by humans and has the same patterns.

Control0..1
TypeHumanName
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Need to be able to track the patient by multiple names. Examples are your official name and a partner name.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
194. Patient.name:namePriorToFirstMarriage.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
196. Patient.name:namePriorToFirstMarriage.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.name.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
198. Patient.name:namePriorToFirstMarriage.use
Definition

Identifies the purpose for this name.

Shortusual | official | temp | nickname | anonymous | old | maiden
Comments

Applications can assume that a name is current unless it explicitly says that it is temporary or old.

Control1..1
BindingThe codes SHALL be taken from NameUse

The use of a human name.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old name etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows the appropriate name for a particular context of use to be selected from among a set of names.

Fixed Valuemaiden
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
200. Patient.name:namePriorToFirstMarriage.text
Definition

Specifies the entire name as it should be displayed e.g. on an application UI. This may be provided instead of or as well as the specific parts.

ShortText representation of the full name
Comments

Can provide both a text representation and parts. Applications updating a name SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
202. Patient.name:namePriorToFirstMarriage.family
Definition

The part of a name that links to the genealogy. In some cultures (e.g. Eritrea) the family name of a son is the first name of his father.

ShortFamily name (often called 'Surname')
Comments

Family Name may be decomposed into specific parts using extensions (de, nl, es related cultures).

Control1..1
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namessurname
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
204. Patient.name:namePriorToFirstMarriage.given
Definition

Given name.

ShortGiven names (not always 'first'). Includes middle names
Comments

If only initials are recorded, they may be used in place of the full name parts. Initials may be separated into multiple given names but often aren't due to paractical limitations. This element is not called "first name" since given names do not always come first.

Control0..*
This element is affected by the following invariants: us-core-6
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate Namesfirst name, middle name
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
206. Patient.name:namePriorToFirstMarriage.prefix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the start of the name.

ShortParts that come before the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
208. Patient.name:namePriorToFirstMarriage.suffix
Definition

Part of the name that is acquired as a title due to academic, legal, employment or nobility status, etc. and that appears at the end of the name.

ShortParts that come after the name
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supportfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
210. Patient.name:namePriorToFirstMarriage.period
Definition

Indicates the period of time when this name was valid for the named person.

ShortTime period when name was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

Allows names to be placed in historical context.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
212. Patient.telecom
Definition

A contact detail (e.g. a telephone number or an email address) by which the individual may be contacted.

ShortA contact detail for the individual
Comments

A Patient may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently and also to help with identification. The address might not go directly to the individual, but may reach another party that is able to proxy for the patient (i.e. home phone, or pet owner's phone).

Control0..*
TypeContactPoint
Is Modifierfalse
Must Supportfalse
Summarytrue
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
214. Patient.telecom.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
216. Patient.telecom.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.telecom.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
218. Patient.telecom.system
Definition

Telecommunications form for contact point - what communications system is required to make use of the contact.

Shortphone | fax | email | pager | url | sms | other
Control1..1
This element is affected by the following invariants: cpt-2
BindingThe codes SHALL be taken from ContactPointSystem

Telecommunications form for contact point.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
220. Patient.telecom.value
Definition

The actual contact point details, in a form that is meaningful to the designated communication system (i.e. phone number or email address).

ShortThe actual contact point details
Comments

Additional text data such as phone extension numbers, or notes about use of the contact are sometimes included in the value.

Control1..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to support legacy numbers that are not in a tightly controlled format.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
222. Patient.telecom.use
Definition

Identifies the purpose for the contact point.

Shorthome | work | temp | old | mobile - purpose of this contact point
Comments

Applications can assume that a contact is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from ContactPointUse
Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old contact etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Need to track the way a person uses this contact, so a user can choose which is appropriate for their purpose.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
224. Patient.telecom.rank
Definition

Specifies a preferred order in which to use a set of contacts. ContactPoints with lower rank values are more preferred than those with higher rank values.

ShortSpecify preferred order of use (1 = highest)
Comments

Note that rank does not necessarily follow the order in which the contacts are represented in the instance.

Control0..1
TypepositiveInt
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
226. Patient.telecom.period
Definition

Time period when the contact point was/is in use.

ShortTime period when the contact point was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
228. Patient.gender
Definition

Administrative Gender - the gender that the patient is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Comments

The gender might not match the biological sex as determined by genetics or the individual's preferred identification. Note that for both humans and particularly animals, there are other legitimate possibilities than male and female, though the vast majority of systems and contexts only support male and female. Systems providing decision support or enforcing business rules should ideally do this on the basis of Observations dealing with the specific sex or gender aspect of interest (anatomical, chromosomal, social, etc.) However, because these observations are infrequently recorded, defaulting to the administrative gender is common practice. Where such defaulting occurs, rule enforcement should allow for the variation between administrative and biological, chromosomal and other gender aspects. For example, an alert about a hysterectomy on a male should be handled as a warning or overridable error, not a "hard" error. See the Patient Gender and Sex section for additional information about communicating patient gender and sex.

Control1..1
BindingThe codes SHALL be taken from AdministrativeGender
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Needed for identification of the individual, in combination with (at least) name and birth date.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
230. Patient.birthDate
Definition

The date of birth for the individual.

ShortThe date of birth for the individual
Comments

At least an estimated year should be provided as a guess if the real DOB is unknown There is a standard extension "patient-birthTime" available that should be used where Time is required (such as in maternity/infant care systems).

Control0..1
Typedate
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Requirements

Age of the individual drives many clinical processes.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
LOINC Code21112-8
232. Patient.birthDate.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
234. Patient.birthDate.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.birthDate.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
236. Patient.birthDate.extension:partialDateTime
Slice NamepartialDateTime
Definition

Alternative component representation of partial date and time. See [note on birth date and time].

ShortpartialDateTIme
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - Partial Date Time Vital Records) (Complex Extension)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
238. Patient.birthDate.extension:birthTime
Slice NamebirthTime
Definition

The time of day that the Patient was born. This includes the date to ensure that the timezone information can be communicated effectively.

ShortTime of day of birth
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Birth Time) (Extension Type: dateTime)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
240. Patient.birthDate.extension:bypassEditFlag
Slice NamebypassEditFlag
Definition

Extension to hold a codeable concept from one of several valuesets.

ShortExtension - BypassEditFlag Vital Records
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
242. Patient.birthDate.extension:bypassEditFlag.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
244. Patient.birthDate.extension:bypassEditFlag.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.birthDate.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
246. Patient.birthDate.extension:bypassEditFlag.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/us/vr-common-library/StructureDefinition/BypassEditFlag
248. Patient.birthDate.extension:bypassEditFlag.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortTo reflect the relevant edit possibilities for date of birth.
Control1..1
BindingThe codes SHALL be taken from ValueSet - Mothers Date of Birth Edit Flags (NCHS) Vital Records

Date of Birth Edit Flags (NCHS)

TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
250. Patient.birthDate.value
Definition

The actual value

ShortPrimitive value for date
Control0..1
Typedate
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
252. Patient.deceased[x]
Definition

Indicates if the individual is deceased or not.

ShortIndicates if the individual is deceased or not
Comments

If there's no value in the instance, it means there is no statement on whether or not the individual is deceased. Most systems will interpret the absence of a value as a sign of the person being alive.

Control0..1
TypeChoice of: boolean, dateTime
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifiertrue because This element is labeled as a modifier because once a patient is marked as deceased, the actions that are appropriate to perform on the patient may be significantly different.
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

The fact that a patient is deceased influences the clinical process. Also, in human communication and relation management it is necessary to know whether the person is alive.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
254. Patient.address
Definition

An address for the individual.

ShortAn address for the individual
Comments

Patient may have multiple addresses with different uses or applicable periods.

Control0..*
TypeAddress
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

May need to keep track of patient addresses for contacting, billing or reporting requirements and also to help with identification.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
256. Patient.address.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
258. Patient.address.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.address.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
260. Patient.address.extension:withinCityLimitsIndicator
Slice NamewithinCityLimitsIndicator
Definition

Used to indicate whether or not an address is within city limits.

ShortUsed to indicate whether or not an address is within city limits.
Control0..1
TypeExtension(Extension - Within City Limits Indicator Vital Records) (Extension Type: Coding)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
262. Patient.address.extension:predir
Slice Namepredir
Definition

PreDirectional component of address as defined by USPS

ShortExtension - PreDirectional Vital Records
Control0..1
TypeExtension(Extension - PreDirectional Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
264. Patient.address.extension:stnum
Slice Namestnum
Definition

StreetNumber component of address as defined by USPS

ShortExtension - StreetNumber Vital Records
Control0..1
TypeExtension(Extension - StreetNumber Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
266. Patient.address.extension:stname
Slice Namestname
Definition

StreetName component of address as defined by USPS

ShortExtension - StreetName Vital Records
Control0..1
TypeExtension(Extension - StreetName Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
268. Patient.address.extension:stdesig
Slice Namestdesig
Definition

StreetDesignator component of address as defined by USPS

ShortExtension - StreetDesignator Vital Records
Control0..1
TypeExtension(Extension - StreetDesignator Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
270. Patient.address.extension:postdir
Slice Namepostdir
Definition

PostDirectional component of address as defined by USPS

ShortExtension - PostDirectional Vital Records
Control0..1
TypeExtension(Extension - PostDirectional Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
272. Patient.address.extension:unitnumber
Slice Nameunitnumber
Definition

UnitOrAptNumber component of address as defined by USPS

ShortExtension - UnitOrAptNumber Vital Records
Control0..1
TypeExtension(Extension - UnitOrAptNumber Vital Records) (Extension Type: string)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
274. Patient.address.use
Definition

The purpose of this address.

Shorthome | work | temp | old | billing - purpose of this address
Comments

Applications can assume that an address is current unless it explicitly says that it is temporary or old.

Control0..1
BindingThe codes SHALL be taken from AddressUse

The use of an address.

Typecode
Is Modifiertrue because This is labeled as &quot;Is Modifier&quot; because applications should not mistake a temporary or old address etc.for a current/permanent one
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

Allows an appropriate address to be chosen from a list of many.

Example<br/><b>General</b>:home
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
276. Patient.address.type
Definition

Distinguishes between physical addresses (those you can visit) and mailing addresses (e.g. PO Boxes and care-of addresses). Most addresses are both.

Shortpostal | physical | both
Comments

The definition of Address states that "address is intended to describe postal addresses, not physical locations". However, many applications track whether an address has a dual purpose of being a location that can be visited as well as being a valid delivery destination, and Postal addresses are often used as proxies for physical locations (also see the Location resource).

Control0..1
BindingThe codes SHALL be taken from AddressType

The type of an address (physical / postal).

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Example<br/><b>General</b>:both
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
278. Patient.address.text
Definition

Specifies the entire address as it should be displayed e.g. on a postal label. This may be provided instead of or as well as the specific parts.

ShortText representation of the address
Comments

Can provide both a text representation and parts. Applications updating an address SHALL ensure that when both text and parts are present, no content is included in the text that isn't found in a part.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Requirements

A renderable, unencoded form.

Example<br/><b>General</b>:137 Nowhere Street, Erewhon 9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
280. Patient.address.line
Definition

This component contains the house number, apartment number, street name, street direction, P.O. Box number, delivery hints, and similar address information.

ShortStreet name, number, direction & P.O. Box etc.
Control0..*
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Example<br/><b>General</b>:137 Nowhere Street
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
282. Patient.address.city
Definition

The name of the city, town, suburb, village or other community or delivery center.

ShortName of city, town etc.
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesMunicpality
Example<br/><b>General</b>:Erewhon
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
284. Patient.address.city.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
286. Patient.address.city.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.address.city.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
288. Patient.address.city.extension:cityCode
Slice NamecityCode
Definition

Numeric code from in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCity Code
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - City Code Vital Records) (Extension Type: positiveInt)
Is Modifierfalse
LabelCity Code
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
290. Patient.address.city.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
292. Patient.address.district
Definition

The name of the administrative area (county).

ShortDistrict name (aka county)
Comments

District is sometimes known as county, but in some regions 'county' is used in place of city (municipality), so county name should be conveyed in city instead.

Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Alternate NamesCounty
Example<br/><b>General</b>:Madison
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
294. Patient.address.district.id
Definition

unique id for the element within a resource (for internal references)

Shortxml:id (or equivalent in JSON)
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
296. Patient.address.district.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.address.district.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
298. Patient.address.district.extension:districtCode
Slice NamedistrictCode
Definition

Numeric code in accordance with the NCHS Instruction Manual Part 8, Vital Records Geographic Classification, 2014 (https://www.cdc.gov/nchs/data/dvs/IMP8_2014.pdf) and https://ftp.cdc.gov/pub/health_Statistics/nchs/Manuals/Mortality/PLACE_CODES.txt.

ShortCounty code
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Extension - District Code Vital Records) (Extension Type: positiveInt)
Is Modifierfalse
LabelCounty code
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
300. Patient.address.district.value
Definition

The actual value

ShortPrimitive value for string
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Max Length1048576
302. Patient.address.state
Definition

Sub-unit of a country with limited sovereignty in a federally organized country. A code may be used if codes are in common use (e.g. US 2 letter state codes).

ShortSub-unit of country (abbreviations ok)
Control0..1
BindingThe codes SHALL be taken from ValueSet - States, Territories and Provinces Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesProvince, Territory
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
304. Patient.address.postalCode
Definition

A postal code designating a region defined by the postal service.

ShortUS Zip Codes
Control0..1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Alternate NamesZip, Zip Code
Example<br/><b>General</b>:9132
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
306. Patient.address.country
Definition

Country - a nation as commonly understood or generally accepted.

ShortCountry (e.g. can be ISO 3166 2 or 3 letter code)
Comments

ISO 3166 3 letter codes can be used in place of a human readable country name.

Control0..1
BindingThe codes SHALL be taken from ValueSet - Residence Country Vital Records
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
308. Patient.address.period
Definition

Time period when address was/is in use.

ShortTime period when address was/is in use
Control0..1
TypePeriod
Is Modifierfalse
Must Supporttrue
Summarytrue
Requirements

Allows addresses to be placed in historical context.

Example<br/><b>General</b>:&lt;valuePeriod&nbsp;xmlns=&quot;http://hl7.org/fhir&quot;&gt;<br/>&nbsp;&nbsp;&lt;start&nbsp;value=&quot;2010-03-23&quot;/&gt;<br/>&nbsp;&nbsp;&lt;end&nbsp;value=&quot;2010-07-01&quot;/&gt;<br/>&lt;/valuePeriod&gt;<br/>
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
310. Patient.maritalStatus
Definition

This field contains a patient's most recent marital (civil) status.

ShortMarital (civil) status of a patient
Control0..1
BindingUnless not suitable, these codes SHALL be taken from Marital Status Codes

The domestic partnership status of a person.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Most, if not all systems capture it.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
312. Patient.multipleBirth[x]
Definition

If not single birth, specify born 1st, 2nd, etc. – For multiple deliveries, the order this infant was delivered in the set. Include all live births and fetal losses.

ShortIf not single birth - born first, second, third, etc.
Comments

Where the valueInteger is provided, the number is the birth number in the sequence. E.g. The middle birth in triplets would be valueInteger=2 and the third born would have valueInteger=3 If a boolean value was provided for this triplets example, then all 3 patient records would have valueBoolean=true (the ordering is not indicated).

Control0..1
TypeChoice of: boolean, integer
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

For disambiguation of multiple-birth children, especially relevant where the care provider doesn't meet the patient, such as labs.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
314. Patient.multipleBirth[x].id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
316. Patient.multipleBirth[x].extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.multipleBirth[x].extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
318. Patient.multipleBirth[x].extension:bypassEditFlag
Slice NamebypassEditFlag
Definition

Extension to hold a codeable concept from one of several valuesets.

ShortExtension - BypassEditFlag Vital Records
Control0..1
TypeExtension(Extension - BypassEditFlag Vital Records) (Extension Type: CodeableConcept)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
320. Patient.multipleBirth[x].extension:bypassEditFlag.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
322. Patient.multipleBirth[x].extension:bypassEditFlag.extension
Definition

An Extension

ShortExtension
Control0..0
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Patient.multipleBirth[x].extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ url
324. Patient.multipleBirth[x].extension:bypassEditFlag.url
Definition

Source of the definition for the extension code - a logical name or a URL.

Shortidentifies the meaning of the extension
Comments

The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.

Control1..1
Typeuri
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
Fixed Valuehttp://hl7.org/fhir/us/vr-common-library/StructureDefinition/BypassEditFlag
326. Patient.multipleBirth[x].extension:bypassEditFlag.value[x]
Definition

Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).

ShortValue of extension
Control1..1
BindingThe codes SHALL be taken from ValueSet - Plurality Edit Flags (NCHS) Vital Records

Plurality Edit Flags (NCHS)

TypeCodeableConcept
[x] NoteSee Choice of Data Types for further information about how to use [x]
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
328. Patient.multipleBirth[x].extension:multipleBirthTotal
Slice NamemultipleBirthTotal
Definition

Where a patient is a part of a multiple delivery, this is the total number of deliveries that occurred in this pregnancy.

ShortTotal births in this pregnancy
Control0..1
TypeExtension(Patient Multiple Birth Total) (Extension Type: positiveInt)
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
330. Patient.photo
Definition

Image of the patient.

ShortImage of the patient
Comments

Guidelines:

  • Use id photos, not clinical photos.
  • Limit dimensions to thumbnail.
  • Keep byte count low to ease resource updates.
Control0..*
TypeAttachment
Is Modifierfalse
Summaryfalse
Requirements

Many EHR systems have the capability to capture an image of the patient. Fits with newer social media usage too.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
332. Patient.contact
Definition

A contact party (e.g. guardian, partner, friend) for the patient.

ShortA contact party (e.g. guardian, partner, friend) for the patient
Comments

Contact covers all kinds of contact parties: family members, business contacts, guardians, caregivers. Not applicable to register pedigree and family ties beyond use of having contact.

Control0..*
TypeBackboneElement
Is Modifierfalse
Summaryfalse
Requirements

Need to track people you can contact about the patient.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
pat-1: SHALL at least contain a contact's details or a reference to an organization (name.exists() or telecom.exists() or address.exists() or organization.exists())
334. Patient.contact.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
336. Patient.contact.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
338. Patient.contact.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
340. Patient.contact.relationship
Definition

The nature of the relationship between the patient and the contact person.

ShortThe kind of relationship
Control0..*
BindingUnless not suitable, these codes SHALL be taken from PatientContactRelationship

The nature of the relationship between a patient and a contact person for that patient.

TypeCodeableConcept
Is Modifierfalse
Summaryfalse
Requirements

Used to determine which contact person is the most relevant to approach, depending on circumstances.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
342. Patient.contact.name
Definition

A name associated with the contact person.

ShortA name associated with the contact person
Control0..1
TypeHumanName
Is Modifierfalse
Summaryfalse
Requirements

Contact persons need to be identified by name, but it is uncommon to need details about multiple other names for that contact person.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
344. Patient.contact.telecom
Definition

A contact detail for the person, e.g. a telephone number or an email address.

ShortA contact detail for the person
Comments

Contact may have multiple ways to be contacted with different uses or applicable periods. May need to have options for contacting the person urgently, and also to help with identification.

Control0..*
TypeContactPoint
Is Modifierfalse
Summaryfalse
Requirements

People have (primary) ways to contact them in some way such as phone, email.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
346. Patient.contact.address
Definition

Address for the contact person.

ShortAddress for the contact person
Control0..1
TypeAddress
Is Modifierfalse
Summaryfalse
Requirements

Need to keep track where the contact person can be contacted per postal mail or visited.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
348. Patient.contact.gender
Definition

Administrative Gender - the gender that the contact person is considered to have for administration and record keeping purposes.

Shortmale | female | other | unknown
Control0..1
BindingThe codes SHALL be taken from AdministrativeGender

The gender of a person used for administrative purposes.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

Needed to address the person correctly.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
350. Patient.contact.organization
Definition

Organization on behalf of which the contact is acting or for which the contact is working.

ShortOrganization that is associated with the contact
Control0..1
This element is affected by the following invariants: pat-1
TypeReference(Organization)
Is Modifierfalse
Summaryfalse
Requirements

For guardians or business related contacts, the organization is relevant.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
352. Patient.contact.period
Definition

The period during which this contact person or organization is valid to be contacted relating to this patient.

ShortThe period during which this contact person or organization is valid to be contacted relating to this patient
Control0..1
TypePeriod
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
354. Patient.communication
Definition

A language which may be used to communicate with the patient about his or her health.

ShortA language which may be used to communicate with the patient about his or her health
Comments

If no language is specified, this implies that the default local language is spoken. If you need to convey proficiency for multiple modes, then you need multiple Patient.Communication associations. For animals, language is not a relevant field, and should be absent from the instance. If the Patient does not speak the default local language, then the Interpreter Required Standard can be used to explicitly declare that an interpreter is required.

Control0..*
TypeBackboneElement
Is Modifierfalse
Must Supportfalse
Summaryfalse
Requirements

If a patient does not speak the local language, interpreters may be required, so languages spoken and proficiency are important things to keep track of both for patient and other persons of interest.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
356. Patient.communication.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
358. Patient.communication.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
360. Patient.communication.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
362. Patient.communication.language
Definition

The ISO-639-1 alpha 2 code in lower case for the language, optionally followed by a hyphen and the ISO-3166-1 alpha 2 code for the region in upper case; e.g. "en" for English, or "en-US" for American English versus "en-EN" for England English.

ShortThe language which can be used to communicate with the patient about his or her health
Comments

The structure aa-BB with this exact casing is one the most widely used notations for locale. However not all systems actually code this but instead have it as free text. Hence CodeableConcept instead of code as the data type.

Control1..1
BindingUnless not suitable, these codes SHALL be taken from Language codes with language and optionally a region modifier
TypeCodeableConcept
Is Modifierfalse
Must Supporttrue
Summaryfalse
Requirements

Most systems in multilingual countries will want to convey language. Not all systems actually need the regional dialect.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
364. Patient.communication.preferred
Definition

Indicates whether or not the patient prefers this language (over other languages he masters up a certain level).

ShortLanguage preference indicator
Comments

This language is specifically identified for communicating healthcare information.

Control0..1
Typeboolean
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Requirements

People that master multiple languages up to certain level may prefer one or more, i.e. feel more confident in communicating in a particular language making other languages sort of a fall back method.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
366. Patient.generalPractitioner
Definition

Patient's nominated care provider.

ShortPatient's nominated primary care provider
Comments

This may be the primary care provider (in a GP context), or it may be a patient nominated care manager in a community/disability setting, or even organization that will provide people to perform the care provider roles. It is not to be used to record Care Teams, these should be in a CareTeam resource that may be linked to the CarePlan or EpisodeOfCare resources. Multiple GPs may be recorded against the patient for various reasons, such as a student that has his home GP listed along with the GP at university during the school semesters, or a "fly-in/fly-out" worker that has the onsite GP also included with his home GP to remain aware of medical issues.

Jurisdictions may decide that they can profile this down to 1 if desired, or 1 per type.

Control0..*
TypeReference(Organization, Practitioner, PractitionerRole)
Is Modifierfalse
Summaryfalse
Alternate NamescareProvider
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
368. Patient.managingOrganization
Definition

Organization that is the custodian of the patient record.

ShortOrganization that is the custodian of the patient record
Comments

There is only one managing organization for a specific patient record. Other organizations will have their own Patient record, and may use the Link property to join the records together (or a Person resource which can include confidence ratings for the association).

Control0..1
TypeReference(Organization)
Is Modifierfalse
Summarytrue
Requirements

Need to know who recognizes this patient record, manages and updates it.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
370. Patient.link
Definition

Link to another patient resource that concerns the same actual patient.

ShortLink to another patient resource that concerns the same actual person
Comments

There is no assumption that linked patient records have mutual links.

Control0..*
TypeBackboneElement
Is Modifiertrue because This element is labeled as a modifier because it might not be the main Patient resource, and the referenced patient should be used instead of this Patient record. This is when the link.type value is 'replaced-by'
Summarytrue
Requirements

There are multiple use cases:

  • Duplicate patient records due to the clerical errors associated with the difficulties of identifying humans consistently, and
  • Distribution of patient information across multiple servers.
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
372. Patient.link.id
Definition

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

ShortUnique id for inter-element referencing
Control0..1
Typestring
Is Modifierfalse
XML FormatIn the XML format, this property is represented as an attribute.
Summaryfalse
374. Patient.link.extension
Definition

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortAdditional content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
376. Patient.link.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored even if unrecognized
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
Summarytrue
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content, modifiers
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
378. Patient.link.other
Definition

The other patient resource that the link refers to.

ShortThe other patient or related person resource that the link refers to
Comments

Referencing a RelatedPerson here removes the need to use a Person record to associate a Patient and RelatedPerson as the same individual.

Control1..1
TypeReference(Patient, RelatedPerson)
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
380. Patient.link.type
Definition

The type of link between this patient resource and another patient resource.

Shortreplaced-by | replaces | refer | seealso
Control1..1
BindingThe codes SHALL be taken from LinkType

The type of link between this patient resource and another patient resource.

Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))