CertificationExpirationDate - Definitions - Da Vinci Prior Authorization Support (PAS) FHIR IG v2.2.0-ballot

Da Vinci Prior Authorization Support (PAS) FHIR IG
2.2.0-ballot - STU 2.2 - Ballot United States of America flag

This page is part of the Da Vinci Prior Authorization Support (PAS) FHIR IG (v2.2.0-ballot: STU 2 Ballot) based on FHIR (HL7® FHIR® Standard) R4. This version is a pre-release. The current official version is 2.1.0. For a full list of available versions, see the Directory of published versions

Extension: CertificationExpirationDate - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 3

Definitions for the extension-itemCertificationExpirationDate extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	The specific date or period within which this item's preauthorization expires. Optional Extension Element - found in all resources.
Short	ExtensionOptional Extensions Element
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..0*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/us/davinci-pas/StructureDefinition/extension-itemCertificationExpirationDate`
6. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	Choice of: date, Period, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
Slicing	This element introduces a set of slices on `Extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this
8. Extension.value[x]:valueDate
Slice Name	valueDate
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
10. Extension.value[x]:valuePeriod
Slice Name	valuePeriod
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	Period, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Extension.value[x]:valuePeriod.start
Definition	The start of the period. The boundary is inclusive.
Short	Starting time with inclusive boundary
Comments	If the low element is missing, the meaning is that the low boundary is not known.
Control	0..1 This element is affected by the following invariants: per-1
Type	dateTime
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
14. Extension.value[x]:valuePeriod.end
Definition	The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Short	End time with inclusive boundary, if not ongoing
Comments	The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Control	0..1 This element is affected by the following invariants: per-1
Type	dateTime
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Meaning if Missing	If the end of the period is missing, it means that the period is ongoing
Invariants	ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	The specific date or period within which this item's preauthorization expires.
2. Extension.extension
Control	0..0
4. Extension.url
Fixed Value	`http://hl7.org/fhir/us/davinci-pas/StructureDefinition/extension-itemCertificationExpirationDate`
6. Extension.value[x]
Type	Choice of: date, Period, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Slicing	This element introduces a set of slices on `Extension.value[x]`. The slices areUnordered and Open, and can be differentiated using the following discriminators: type @ $this
8. Extension.value[x]:valueDate
Slice Name	valueDate
Control	0..1
Type	date
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Invariants	FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
10. Extension.value[x]:valuePeriod
Slice Name	valuePeriod
Control	0..1
Type	Period
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
12. Extension.value[x]:valuePeriod.start
Invariants	FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
14. Extension.value[x]:valuePeriod.end
Invariants	FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	The specific date or period within which this item's preauthorization expires.
Short	Extension
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..0
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/us/davinci-pas/StructureDefinition/extension-itemCertificationExpirationDate`
8. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	Choice of: date, Period
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
Slicing	This element introduces a set of slices on `Extension.value[x]`. The slices areUnordered and Closed, and can be differentiated using the following discriminators: type @ $this
10. Extension.value[x]:valueDate
Slice Name	valueDate
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	date
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
12. Extension.value[x]:valuePeriod
Slice Name	valuePeriod
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..1
Type	Period
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
14. Extension.value[x]:valuePeriod.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
16. Extension.value[x]:valuePeriod.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.value[x].extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
18. Extension.value[x]:valuePeriod.start
Definition	The start of the period. The boundary is inclusive.
Short	Starting time with inclusive boundary
Comments	If the low element is missing, the meaning is that the low boundary is not known.
Control	0..1 This element is affected by the following invariants: per-1
Type	dateTime
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)
20. Extension.value[x]:valuePeriod.end
Definition	The end of the period. If the end of the period is missing, it means no end was known or planned at the time the instance was created. The start may be in the past, and the end date in the future, which means that period is expected/planned to end at that time.
Short	End time with inclusive boundary, if not ongoing
Comments	The high value includes any matching date/time. i.e. 2012-02-03T10:00:00 is in a period that has an end value of 2012-02-03.
Control	0..1 This element is affected by the following invariants: per-1
Type	dateTime
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Meaning if Missing	If the end of the period is missing, it means that the period is ongoing
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) FullDateRule: Dates need to be a full date - YYYY-MM-DD (`$this.toString().length() = 10`)

<prev

top

next>

IG © 2020+ HL7 International / Financial Management. Package hl7.fhir.us.davinci-pas#2.2.0-ballot based on FHIR 4.0.1. Generated 2025-07-30
Links: Table of Contents | QA Report | Version History | | Propose a change