This page is part of the Da Vinci Clinical Documentation Exchange (v2.0.0: STU2) based on FHIR R4. This is the current published version. For a full list of available versions, see the Directory of published versions
Page standards status: Trial-use | Maturity Level: 2 |
Definitions for the cdex-sdc-questionnaireresponse resource profile.
Guidance on how to interpret the contents of this table can be found here.
1. QuestionnaireResponse | |
2. QuestionnaireResponse.extension:signature | |
SliceName | signature |
3. QuestionnaireResponse.extension:signature.value[x] | |
Control | 0..? |
Type | Signature(CDexSignature) |
[x] Note | See Choice of Data Types for further information about how to use [x] |
4. QuestionnaireResponse.item | |
5. QuestionnaireResponse.item.extension:ItemSignature | |
SliceName | ItemSignature |
6. QuestionnaireResponse.item.extension:ItemSignature.value[x] | |
Control | 0..? |
Type | Signature(CDexSignature) |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Guidance on how to interpret the contents of this table can be found here.
1. QuestionnaireResponse | |
Definition | Sets expectations for supported capabilities for questionnaire responses for SDC-conformant systems. A structured set of questions and their answers. The questions are ordered and grouped into coherent subsets, corresponding to the structure of the grouping of the questionnaire being responded to. |
Control | 0..* |
Summary | false |
Alternate Names | Form, QuestionnaireAnswers, Form Data |
Comments | The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse. |
Invariants | Defined on this element dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (: contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (: contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (: contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (: contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (: text.`div`.exists()) sdcqr-1: Subject SHOULD be present (searching is difficult without subject). Almost all QuestionnaireResponses should be with respect to some sort of subject. (: subject.exists()) sdcqr-2: When repeats=true for a group, it'll be represented with multiple items with the same linkId in the QuestionnaireResponse. For a question, it'll be represented by a single item with that linkId with multiple answers. (: (QuestionnaireResponse|repeat(answer|item)).select(item.where(answer.value.exists()).linkId.isDistinct()).allTrue()) |
2. QuestionnaireResponse.implicitRules | |
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. |
Control | 0..1 |
Type | uri |
Is Modifier | true |
Summary | true |
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
3. QuestionnaireResponse.extension:signature | |
SliceName | signature |
Definition | Represents a wet or electronic signature for either the form overall or for the question or item it's associated with. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(signature) (Extension Type: Signature) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
4. QuestionnaireResponse.extension:signature.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..0* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on QuestionnaireResponse.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
5. QuestionnaireResponse.extension:signature.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/StructureDefinition/questionnaireresponse-signature |
6. QuestionnaireResponse.extension:signature.value[x] | |
Definition | A JWS digital signature along with supporting context. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: Signature(CDexSignature), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Comments | The elements of the Signature Resource are for ease of access of these elements. For digital signatures (Xml DigSig, JWS), the non-repudiation proof comes from the Signature validation, which includes validation of the referenced objects (e.g. Resources) (a.k.a., Content) in the XML-Signature Detached form. |
Invariants | Defined on this element cdex-13: The signature element must have either reference to the signer or the signer's identifier and name. (: who.reference.exists() or (who.identifier.exists() and who.display.exists())) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
7. QuestionnaireResponse.extension:completionMode | |
SliceName | completionMode |
Definition | Indicates how the individual completing the QuestionnaireResponse provided their responses. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(completionMode) (Extension Type: CodeableConcept) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
8. QuestionnaireResponse.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | false |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
9. QuestionnaireResponse.identifier | |
Definition | A business identifier assigned to a particular completed (or partially completed) questionnaire. |
Note | This is a business identifier, not a resource identifier (see discussion) |
Control | 0..1 |
Type | Identifier |
Must Support | true |
Summary | true |
Requirements | Used for tracking, registration and other business purposes. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
10. QuestionnaireResponse.questionnaire | |
Definition | The Questionnaire that defines and organizes the questions for which answers are being provided. |
Control | 10..1 |
Type | canonical(SDCBaseQuestionnaire|Questionnaire) |
Must Support | true |
Summary | true |
Requirements | Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form. |
Alternate Names | Form |
Comments | For SDC, this SHALL be the version-specific URL of the form as hosted on the Form Manager. If a QuestionnaireResponse references a Questionnaire, then the QuestionnaireResponse structure must be consistent with the Questionnaire (i.e. questions must be organized into the same groups, nested questions must still be nested, etc.). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
11. QuestionnaireResponse.questionnaire.extension:questionnaireDisplay | |
SliceName | questionnaireDisplay |
Definition | The title or other name to display when referencing a resource by canonical URL. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(Display Name) (Extension Type: string) |
Must Support | true |
Comments | This SHALL be the title of the Questionnaire at the time the QuestionnaireResponse was originally authored. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
12. QuestionnaireResponse.status | |
Definition | The position of the questionnaire response within its overall lifecycle. |
Control | 1..1 |
Binding | The codes SHALL be taken from QuestionnaireResponseStatus Lifecycle status of the questionnaire response. |
Type | code |
Is Modifier | true |
Must Support | true |
Summary | true |
Requirements | The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished. |
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
13. QuestionnaireResponse.subject | |
Definition | The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information. |
Control | 0..1 |
Type | Reference(Resource) |
Must Support | true |
Summary | true |
Requirements | Allows linking the answers to the individual the answers describe. May also affect access control. |
Alternate Names | Patient, Focus |
Comments | If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types. If subject is omitted - because the QuestionnaireResponse is not associated with a specific subject, ensure that QuestionnaireRsponse.identifier is present or the QuestionnaireResponse is referenced somewhere (e.g. Task.output, Composition.section.entry, etc.) to allow tracking and retrieval of the QuestionnaireResponse If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
14. QuestionnaireResponse.authored | |
Definition | Identifies when this version of the answer set was created. Changes whenever the answers are updated. The date and/or time that this set of answers were last changed. |
Control | 10..1 |
Type | dateTime |
Must Support | true |
Summary | true |
Requirements | Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers. |
Alternate Names | Date Created, Date published, Date Issued, Date updated |
Comments | May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured. This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
15. QuestionnaireResponse.author | |
Definition | Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system. |
Control | 0..1 |
Type | Reference(Device|Practitioner|PractitionerRole|Patient|RelatedPerson|Organization) |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | true |
Requirements | Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers. |
Alternate Names | Laboratory, Service, Practitioner, Department, Company, Performer |
Comments | Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
16. QuestionnaireResponse.item | |
Definition | A group or question item from the original questionnaire for which answers are provided. |
Control | 0..* |
Type | BackboneElement |
Must Support | true |
Summary | false |
Comments | Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer). |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) qrs-1: Nested item can't be beneath both item and answer (: (answer.exists() and item.exists()).not()) |
17. QuestionnaireResponse.item.extension:itemMedia | |
SliceName | itemMedia |
Definition | Media to render/make available as an accompaniment to the question being asked |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ItemMedia) (Extension Type: Attachment) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
18. QuestionnaireResponse.item.extension:ItemSignature | |
SliceName | ItemSignature |
Definition | Represents a wet or electronic signature for either the form overall or for the question or item it's associated with. |
Control | 0..* This element is affected by the following invariants: ele-1 |
Type | Extension(signature) (Extension Type: Signature) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
19. QuestionnaireResponse.item.extension:ItemSignature.extension | |
Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
Control | 0..0* |
Type | Extension |
Summary | false |
Alternate Names | extensions, user content |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
Slicing | This element introduces a set of slices on QuestionnaireResponse.item.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
|
20. QuestionnaireResponse.item.extension:ItemSignature.url | |
Definition | Source of the definition for the extension code - a logical name or a URL. |
Control | 1..1 |
Type | uri |
XML Representation | In the XML format, this property is represented as an attribute. |
Summary | false |
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
Fixed Value | http://hl7.org/fhir/StructureDefinition/questionnaireresponse-signature |
21. QuestionnaireResponse.item.extension:ItemSignature.value[x] | |
Definition | A JWS digital signature along with supporting context. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
Control | 10..1 This element is affected by the following invariants: ele-1 |
Type | Choice of: Signature(CDexSignature), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, unsignedInt, time |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Comments | The elements of the Signature Resource are for ease of access of these elements. For digital signatures (Xml DigSig, JWS), the non-repudiation proof comes from the Signature validation, which includes validation of the referenced objects (e.g. Resources) (a.k.a., Content) in the XML-Signature Detached form. |
Invariants | Defined on this element cdex-13: The signature element must have either reference to the signer or the signer's identifier and name. (: who.reference.exists() or (who.identifier.exists() and who.display.exists())) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
22. QuestionnaireResponse.item.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
23. QuestionnaireResponse.item.linkId | |
Definition | The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource. |
Control | 1..1 |
Type | string |
Must Support | true |
Summary | false |
Requirements | Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
24. QuestionnaireResponse.item.text | |
Definition | Text that is displayed above the contents of the group or as the text of the question being answered. |
Control | 0..1 |
Type | string |
Must Support | true |
Summary | false |
Requirements | Allows the questionnaire response to be read without access to the questionnaire. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
25. QuestionnaireResponse.item.answer | |
Definition | The respondent's answer(s) to the question. |
Control | 0..* |
Type | BackboneElement |
Must Support | true |
Summary | false |
Comments | The value is nested because we cannot have a repeating structure that has variable type. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
26. QuestionnaireResponse.item.answer.extension:itemAnswerMedia | |
SliceName | itemAnswerMedia |
Definition | Media to render/make available as an accompaniment to a specific answer option |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(ItemAnswerMedia) (Extension Type: Attachment) |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
27. QuestionnaireResponse.item.answer.extension:ordinalValue | |
SliceName | ordinalValue |
Definition | A numeric value that allows the comparison (less than, greater than) or other numerical manipulation of a concept (e.g. Adding up components of a score). Scores are usually a whole number, but occasionally decimals are encountered in scores. |
Control | 0..1 This element is affected by the following invariants: ele-1 |
Type | Extension(Ordinal Value) (Extension Type: decimal) |
Comments | Scores are commonly encountered in various clinical assessment scales. Assigning a value to a concept should generally be done in a formal code system that defines the value, or in an applicable value set for the concept, but some concepts do not have a formal definition (or are not even represented as a concept formally, especially in Questionnaires, so this extension is allowed to appear ouside those preferred contexts. Scores may even be assigned arbitrarily during use (hence, on Coding). The value may be constrained to an integer in some contexts of use. Todo: Scoring algorithms may also be defined directly, but how this is done is not yet defined. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
28. QuestionnaireResponse.item.answer.modifierExtension | |
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). |
Control | 0..* |
Type | Extension |
Is Modifier | true |
Summary | true |
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. |
Alternate Names | extensions, user content, modifiers |
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) |
29. QuestionnaireResponse.item.answer.value[x] | |
Definition | The answer (or one of the answers) provided by the respondent to the question. |
Control | 0..1 |
Binding | For example codes, see QuestionnaireAnswerCodes Code indicating the response provided for a question. |
Type | Choice of: boolean, date, dateTime, time, decimal, integer, string, Coding, uri, Quantity, Attachment, Reference(Resource) |
[x] Note | See Choice of Data Types for further information about how to use [x] |
Must Support | true |
Must Support Types | No must-support rules about the choice of types/profiles |
Summary | false |
Requirements | Ability to retain a single-valued answer to a question. |
Comments | More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
30. QuestionnaireResponse.item.answer.item | |
Definition | Nested groups and/or questions found within this particular answer. |
Control | 0..* |
Type | See ttp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item |
Must Support | true |
Summary | false |
Requirements | It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
31. QuestionnaireResponse.item.item | |
Definition | Questions or sub-groups nested beneath a question or group. |
Control | 0..* |
Type | See ttp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item |
Must Support | true |
Summary | false |
Requirements | Reports can consist of complex nested groups. |
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be found here.
1. QuestionnaireResponse | |||||
Definition | Sets expectations for supported capabilities for questionnaire responses for SDC-conformant systems. | ||||
Control | 0..* | ||||
Summary | false | ||||
Alternate Names | Form, QuestionnaireAnswers, Form Data | ||||
Comments | The QuestionnaireResponse contains enough information about the questions asked and their organization that it can be interpreted somewhat independently from the Questionnaire it is based on. I.e. You don't need access to the Questionnaire in order to extract basic information from a QuestionnaireResponse. | ||||
2. QuestionnaireResponse.id | |||||
Definition | The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes. | ||||
Control | 0..1 | ||||
Type | id | ||||
Summary | true | ||||
Comments | The only time that a resource does not have an id is when it is being submitted to the server using a create operation. | ||||
3. QuestionnaireResponse.meta | |||||
Definition | The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource. | ||||
Control | 0..1 | ||||
Type | Meta | ||||
Summary | true | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
4. QuestionnaireResponse.implicitRules | |||||
Definition | A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Is Modifier | true | ||||
Summary | true | ||||
Comments | Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
5. QuestionnaireResponse.language | |||||
Definition | The base language in which the resource is written. | ||||
Control | 0..1 | ||||
Binding | The codes SHOULD be taken from CommonLanguages
A human language
| ||||
Type | code | ||||
Summary | false | ||||
Comments | Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
6. QuestionnaireResponse.text | |||||
Definition | A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety. | ||||
Control | 0..1 | ||||
Type | Narrative | ||||
Summary | false | ||||
Alternate Names | narrative, html, xhtml, display | ||||
Comments | Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
7. QuestionnaireResponse.contained | |||||
Definition | These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope. | ||||
Control | 0..* | ||||
Type | Resource | ||||
Summary | false | ||||
Alternate Names | inline resources, anonymous resources, contained resources | ||||
Comments | This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels. | ||||
8. QuestionnaireResponse.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
9. QuestionnaireResponse.extension:signature | |||||
SliceName | signature | ||||
Definition | Represents a wet or electronic signature for either the form overall or for the question or item it's associated with. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(signature) (Extension Type: Signature) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
10. QuestionnaireResponse.extension:signature.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
11. QuestionnaireResponse.extension:signature.extension | |||||
Definition | An Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
12. QuestionnaireResponse.extension:signature.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Control | 1..1 | ||||
Type | uri | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/questionnaireresponse-signature | ||||
13. QuestionnaireResponse.extension:signature.value[x] | |||||
Definition | A JWS digital signature along with supporting context. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Signature(CDexSignature) | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Comments | The elements of the Signature Resource are for ease of access of these elements. For digital signatures (Xml DigSig, JWS), the non-repudiation proof comes from the Signature validation, which includes validation of the referenced objects (e.g. Resources) (a.k.a., Content) in the XML-Signature Detached form. | ||||
Invariants | Defined on this element cdex-13: The signature element must have either reference to the signer or the signer's identifier and name. (: who.reference.exists() or (who.identifier.exists() and who.display.exists())) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
14. QuestionnaireResponse.extension:completionMode | |||||
SliceName | completionMode | ||||
Definition | Indicates how the individual completing the QuestionnaireResponse provided their responses. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(completionMode) (Extension Type: CodeableConcept) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
15. QuestionnaireResponse.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | false | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
16. QuestionnaireResponse.identifier | |||||
Definition | A business identifier assigned to a particular completed (or partially completed) questionnaire. | ||||
Note | This is a business identifier, not a resource identifier (see discussion) | ||||
Control | 0..1 | ||||
Type | Identifier | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Used for tracking, registration and other business purposes. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
17. QuestionnaireResponse.basedOn | |||||
Definition | The order, proposal or plan that is fulfilled in whole or in part by this QuestionnaireResponse. For example, a ServiceRequest seeking an intake assessment or a decision support recommendation to assess for post-partum depression. | ||||
Control | 0..* | ||||
Type | Reference(CarePlan|ServiceRequest) | ||||
Summary | true | ||||
Requirements | Supports traceability of responsibility for the action and allows linkage of an action to the recommendations acted upon. | ||||
Alternate Names | order | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
18. QuestionnaireResponse.partOf | |||||
Definition | A procedure or observation that this questionnaire was performed as part of the execution of. For example, the surgery a checklist was executed as part of. | ||||
Control | 0..* | ||||
Type | Reference(Observation|Procedure) | ||||
Summary | true | ||||
Comments | Composition of questionnaire responses will be handled by the parent questionnaire having answers that reference the child questionnaire. For relationships to referrals, and other types of requests, use basedOn. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
19. QuestionnaireResponse.questionnaire | |||||
Definition | The Questionnaire that defines and organizes the questions for which answers are being provided. | ||||
Control | 1..1 | ||||
Type | canonical(SDCBaseQuestionnaire) | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Needed to allow editing of the questionnaire response in a manner that enforces the constraints of the original form. | ||||
Alternate Names | Form | ||||
Comments | For SDC, this SHALL be the version-specific URL of the form as hosted on the Form Manager. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
20. QuestionnaireResponse.questionnaire.id | |||||
Definition | unique id for the element within a resource (for internal references) | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
21. QuestionnaireResponse.questionnaire.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.questionnaire.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
22. QuestionnaireResponse.questionnaire.extension:questionnaireDisplay | |||||
SliceName | questionnaireDisplay | ||||
Definition | The title or other name to display when referencing a resource by canonical URL. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Display Name) (Extension Type: string) | ||||
Must Support | true | ||||
Comments | This SHALL be the title of the Questionnaire at the time the QuestionnaireResponse was originally authored. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
23. QuestionnaireResponse.questionnaire.value | |||||
Definition | Primitive value for canonical | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
24. QuestionnaireResponse.status | |||||
Definition | The position of the questionnaire response within its overall lifecycle. | ||||
Control | 1..1 | ||||
Binding | The codes SHALL be taken from QuestionnaireResponseStatus Lifecycle status of the questionnaire response | ||||
Type | code | ||||
Is Modifier | true | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | The information on Questionnaire resources may possibly be gathered during multiple sessions and altered after considered being finished. | ||||
Comments | This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
25. QuestionnaireResponse.subject | |||||
Definition | The subject of the questionnaire response. This could be a patient, organization, practitioner, device, etc. This is who/what the answers apply to, but is not necessarily the source of information. | ||||
Control | 0..1 | ||||
Type | Reference(Resource) | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Allows linking the answers to the individual the answers describe. May also affect access control. | ||||
Alternate Names | Patient, Focus | ||||
Comments | If the Questionnaire declared a subjectType, the resource pointed to by this element must be an instance of one of the listed types. If subject is omitted - because the QuestionnaireResponse is not associated with a specific subject, ensure that QuestionnaireRsponse.identifier is present or the QuestionnaireResponse is referenced somewhere (e.g. Task.output, Composition.section.entry, etc.) to allow tracking and retrieval of the QuestionnaireResponse | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
26. QuestionnaireResponse.encounter | |||||
Definition | The Encounter during which this questionnaire response was created or to which the creation of this record is tightly associated. | ||||
Control | 0..1 | ||||
Type | Reference(Encounter) | ||||
Summary | true | ||||
Requirements | Provides context for the information that was captured. May also affect access control. | ||||
Comments | This will typically be the encounter the event occurred within, but some activities may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter. A questionnaire that was initiated during an encounter but not fully completed during the encounter would still generally be associated with the encounter. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
27. QuestionnaireResponse.authored | |||||
Definition | Identifies when this version of the answer set was created. Changes whenever the answers are updated. | ||||
Control | 1..1 | ||||
Type | dateTime | ||||
Must Support | true | ||||
Summary | true | ||||
Requirements | Clinicians need to be able to check the date that the information in the questionnaire was collected, to derive the context of the answers. | ||||
Alternate Names | Date Created, Date published, Date Issued, Date updated | ||||
Comments | May be different from the lastUpdateTime of the resource itself, because that reflects when the data was known to the server, not when the data was captured. This element is optional to allow for systems that might not know the value, however it SHOULD be populated if possible. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
28. QuestionnaireResponse.author | |||||
Definition | Person who received the answers to the questions in the QuestionnaireResponse and recorded them in the system. | ||||
Control | 0..1 | ||||
Type | Reference(Device|Practitioner|PractitionerRole|Patient|RelatedPerson|Organization) | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | true | ||||
Requirements | Need to know who interpreted the subject's answers to the questions in the questionnaire, and selected the appropriate options for answers. | ||||
Alternate Names | Laboratory, Service, Practitioner, Department, Company, Performer | ||||
Comments | Mapping a subject's answers to multiple choice options and determining what to put in the textual answer is a matter of interpretation. Authoring by device would indicate that some portion of the questionnaire had been auto-populated. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
29. QuestionnaireResponse.source | |||||
Definition | The person who answered the questions about the subject. | ||||
Control | 0..1 | ||||
Type | Reference(Patient|Practitioner|PractitionerRole|RelatedPerson) | ||||
Summary | true | ||||
Requirements | When answering questions about a subject that is minor, incapable of answering or an animal, another human source may answer the questions. | ||||
Comments | If not specified, no inference can be made about who provided the data. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
30. QuestionnaireResponse.item | |||||
Definition | A group or question item from the original questionnaire for which answers are provided. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Summary | false | ||||
Comments | Groups cannot have answers and therefore must nest directly within item. When dealing with questions, nesting must occur within each answer because some questions may have multiple answers (and the nesting occurs for each answer). | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) qrs-1: Nested item can't be beneath both item and answer (: (answer.exists() and item.exists()).not()) | ||||
31. QuestionnaireResponse.item.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
32. QuestionnaireResponse.item.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.item.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
33. QuestionnaireResponse.item.extension:itemMedia | |||||
SliceName | itemMedia | ||||
Definition | Media to render/make available as an accompaniment to the question being asked | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(ItemMedia) (Extension Type: Attachment) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
34. QuestionnaireResponse.item.extension:ItemSignature | |||||
SliceName | ItemSignature | ||||
Definition | Represents a wet or electronic signature for either the form overall or for the question or item it's associated with. | ||||
Control | 0..* This element is affected by the following invariants: ele-1 | ||||
Type | Extension(signature) (Extension Type: Signature) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
35. QuestionnaireResponse.item.extension:ItemSignature.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
36. QuestionnaireResponse.item.extension:ItemSignature.extension | |||||
Definition | An Extension | ||||
Control | 0..0 | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.item.extension.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
37. QuestionnaireResponse.item.extension:ItemSignature.url | |||||
Definition | Source of the definition for the extension code - a logical name or a URL. | ||||
Control | 1..1 | ||||
Type | uri | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. | ||||
Fixed Value | http://hl7.org/fhir/StructureDefinition/questionnaireresponse-signature | ||||
38. QuestionnaireResponse.item.extension:ItemSignature.value[x] | |||||
Definition | A JWS digital signature along with supporting context. | ||||
Control | 1..1 This element is affected by the following invariants: ele-1 | ||||
Type | Signature(CDexSignature) | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Comments | The elements of the Signature Resource are for ease of access of these elements. For digital signatures (Xml DigSig, JWS), the non-repudiation proof comes from the Signature validation, which includes validation of the referenced objects (e.g. Resources) (a.k.a., Content) in the XML-Signature Detached form. | ||||
Invariants | Defined on this element cdex-13: The signature element must have either reference to the signer or the signer's identifier and name. (: who.reference.exists() or (who.identifier.exists() and who.display.exists())) ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
39. QuestionnaireResponse.item.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
40. QuestionnaireResponse.item.linkId | |||||
Definition | The item from the Questionnaire that corresponds to this item in the QuestionnaireResponse resource. | ||||
Control | 1..1 | ||||
Type | string | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Items can repeat in the answers, so a direct 1..1 correspondence by position might not exist - requiring correspondence by identifier. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
41. QuestionnaireResponse.item.definition | |||||
Definition | A reference to an ElementDefinition that provides the details for the item. | ||||
Control | 0..1 | ||||
Type | uri | ||||
Summary | false | ||||
Requirements | A common pattern is to define a set of data elements, and then build multiple different questionnaires for different circumstances to gather the data. This element provides traceability to the common definition. | ||||
Comments | The ElementDefinition must be in a StructureDefinition, and must have a fragment identifier that identifies the specific data element by its id (Element.id). E.g. http://hl7.org/fhir/StructureDefinition/Observation#Observation.value[x]. There is no need for this element if the item pointed to by the linkId has a definition listed. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
42. QuestionnaireResponse.item.text | |||||
Definition | Text that is displayed above the contents of the group or as the text of the question being answered. | ||||
Control | 0..1 | ||||
Type | string | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Allows the questionnaire response to be read without access to the questionnaire. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
43. QuestionnaireResponse.item.answer | |||||
Definition | The respondent's answer(s) to the question. | ||||
Control | 0..* | ||||
Type | BackboneElement | ||||
Must Support | true | ||||
Summary | false | ||||
Comments | The value is nested because we cannot have a repeating structure that has variable type. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
44. QuestionnaireResponse.item.answer.id | |||||
Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. | ||||
Control | 0..1 | ||||
Type | string | ||||
XML Representation | In the XML format, this property is represented as an attribute. | ||||
Summary | false | ||||
45. QuestionnaireResponse.item.answer.extension | |||||
Definition | An Extension | ||||
Control | 0..* | ||||
Type | Extension | ||||
Summary | false | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
Slicing | This element introduces a set of slices on QuestionnaireResponse.item.answer.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
| ||||
46. QuestionnaireResponse.item.answer.extension:itemAnswerMedia | |||||
SliceName | itemAnswerMedia | ||||
Definition | Media to render/make available as an accompaniment to a specific answer option | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(ItemAnswerMedia) (Extension Type: Attachment) | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
47. QuestionnaireResponse.item.answer.extension:ordinalValue | |||||
SliceName | ordinalValue | ||||
Definition | A numeric value that allows the comparison (less than, greater than) or other numerical manipulation of a concept (e.g. Adding up components of a score). Scores are usually a whole number, but occasionally decimals are encountered in scores. | ||||
Control | 0..1 This element is affected by the following invariants: ele-1 | ||||
Type | Extension(Ordinal Value) (Extension Type: decimal) | ||||
Comments | Scores are commonly encountered in various clinical assessment scales. Assigning a value to a concept should generally be done in a formal code system that defines the value, or in an applicable value set for the concept, but some concepts do not have a formal definition (or are not even represented as a concept formally, especially in Questionnaires, so this extension is allowed to appear ouside those preferred contexts. Scores may even be assigned arbitrarily during use (hence, on Coding). The value may be constrained to an integer in some contexts of use. Todo: Scoring algorithms may also be defined directly, but how this is done is not yet defined. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
48. QuestionnaireResponse.item.answer.modifierExtension | |||||
Definition | May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself). | ||||
Control | 0..* | ||||
Type | Extension | ||||
Is Modifier | true | ||||
Summary | true | ||||
Requirements | Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions. | ||||
Alternate Names | extensions, user content, modifiers | ||||
Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (: extension.exists() != value.exists()) | ||||
49. QuestionnaireResponse.item.answer.value[x] | |||||
Definition | The answer (or one of the answers) provided by the respondent to the question. | ||||
Control | 0..1 | ||||
Binding | For example codes, see QuestionnaireAnswerCodes Code indicating the response provided for a question | ||||
Type | Choice of: boolean, date, dateTime, time, decimal, integer, string, Coding, uri, Quantity, Attachment, Reference | ||||
[x] Note | See Choice of Data Types for further information about how to use [x] | ||||
Must Support | true | ||||
Must Support Types | No must-support rules about the choice of types/profiles | ||||
Summary | false | ||||
Requirements | Ability to retain a single-valued answer to a question. | ||||
Comments | More complex structures (Attachment, Resource and Quantity) will typically be limited to electronic forms that can expose an appropriate user interface to capture the components and enforce the constraints of a complex data type. Additional complex types can be introduced through extensions. Must match the datatype specified by Questionnaire.item.type in the corresponding Questionnaire. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
50. QuestionnaireResponse.item.answer.item | |||||
Definition | Nested groups and/or questions found within this particular answer. | ||||
Control | 0..* | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | It is useful to have "sub-questions", questions which normally appear when certain answers are given and which collect additional details. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) | ||||
51. QuestionnaireResponse.item.item | |||||
Definition | Questions or sub-groups nested beneath a question or group. | ||||
Control | 0..* | ||||
Type | See ttp://hl7.org/fhir/StructureDefinition/QuestionnaireResponse#QuestionnaireResponse.item | ||||
Must Support | true | ||||
Summary | false | ||||
Requirements | Reports can consist of complex nested groups. | ||||
Invariants | Defined on this element ele-1: All FHIR elements must have a @value or children (: hasValue() or (children().count() > id.count())) |