US Core Implementation Guide
7.0.0 - STU7 United States of America flag

This page is part of the US Core (v7.0.0: STU7) based on FHIR (HL7® FHIR® Standard) R4. This is the current published version. For a full list of available versions, see the Directory of published versions. Page versions: STU6.1 STU6 STU5 STU4 STU3

Resource Profile: USCoreDiagnosticReportProfileLaboratoryReporting - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 3

Definitions for the us-core-diagnosticreport-lab resource profile.

Guidance on how to interpret the contents of this table can be found here

0. DiagnosticReport
Must Supportfalse
Alternate NamesLab Result, Lab Report
Invariantsus-core-8: effective[x] SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies effective.exists())
us-core-9: issued SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies issued.exists())
2. DiagnosticReport.meta
Must Supporttrue
4. DiagnosticReport.meta.lastUpdated
ShortWhen the resource last changed
Must Supporttrue
6. DiagnosticReport.status
BindingThe codes SHALL be taken from DiagnosticReportStatus
(required to http://hl7.org/fhir/ValueSet/diagnostic-report-status)
Must Supporttrue
8. DiagnosticReport.category
Control1..?
Must Supporttrue
SlicingThis element introduces a set of slices on DiagnosticReport.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • pattern @ $this
  • 10. DiagnosticReport.category:LaboratorySlice
    Slice NameLaboratorySlice
    Control1..1
    Must Supporttrue
    Pattern Value{
      "coding" : [{
        "system" : "http://terminology.hl7.org/CodeSystem/v2-0074",
        "code" : "LAB"
      }]
    }
    12. DiagnosticReport.code
    Definition

    The test, panel or battery that was ordered.

    ShortUS Core Laboratory Report Order Code
    Comments

    UsageNote= The typical patterns for codes are: 1) a LOINC code either as a translation from a "local" code or as a primary code, or 2) a local code only if no suitable LOINC exists, or 3) both the local and the LOINC translation. Systems SHALL be capable of sending the local code if one exists.

    BindingUnless not suitable, these codes SHALL be taken from US Core Laboratory Test Codes
    (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-laboratory-test-codes)

    LOINC codes

    Must Supporttrue
    14. DiagnosticReport.subject
    Control1..?
    TypeReference(US Core Patient Profile, Group, Device, US Core Location Profile)
    Must Supporttrue
    Must Support TypesReference(US Core Patient Profile)
    16. DiagnosticReport.encounter
    ShortEncounter associated with DiagnosticReport
    TypeReference(US Core Encounter Profile)
    Must Supporttrue
    18. DiagnosticReport.effective[x]
    ShortDiagnostically relevant time (typically the time of specimen collection)
    TypeChoice of: dateTime, Period
    [x] NoteSee Choice of Data Types for further information about how to use [x]
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Must Support TypesdateTime
    20. DiagnosticReport.issued
    ShortWhen the report was released
    Must Supporttrue
    22. DiagnosticReport.performer
    TypeReference(US Core Practitioner Profile, US Core Organization Profile, US Core CareTeam Profile, US Core PractitionerRole Profile)
    Must Supporttrue
    Must Support TypesReference(US Core Practitioner Profile)
    24. DiagnosticReport.result
    TypeReference(US Core Laboratory Result Observation Profile)
    Must Supporttrue

    Guidance on how to interpret the contents of this table can be found here

    0. DiagnosticReport
    Definition

    The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

    ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
    Comments

    This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

    Control0..*
    Is Modifierfalse
    Must Supportfalse
    Summaryfalse
    Alternate NamesReport, Test, Result, Results, Labs, Laboratory, Lab Result, Lab Report
    Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
    dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
    dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
    dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
    dom-6: A resource should have narrative for robust management (text.`div`.exists())
    us-core-8: effective[x] SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies effective.exists())
    us-core-9: issued SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies issued.exists())
    2. DiagnosticReport.meta
    Definition

    The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

    ShortMetadata about the resource
    Control0..1
    TypeMeta
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    4. DiagnosticReport.meta.lastUpdated
    Definition

    When the resource last changed - e.g. when the version changed.

    ShortWhen the resource last changedWhen the resource version last changed
    Comments

    This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

    Control0..1
    Typeinstant
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    6. DiagnosticReport.implicitRules
    Definition

    A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

    ShortA set of rules under which this content was created
    Comments

    Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

    Control0..1
    Typeuri
    Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    8. DiagnosticReport.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. DiagnosticReport.status
    Definition

    The status of the diagnostic report.

    Shortregistered | partial | preliminary | final +
    Control1..1
    This element is affected by the following invariants: us-core-8, us-core-9
    BindingThe codes SHALL be taken from DiagnosticReportStatushttp://hl7.org/fhir/ValueSet/diagnostic-report-status|4.0.1
    (required to http://hl7.org/fhir/ValueSet/diagnostic-report-status)
    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Requirements

    Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.

    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    12. DiagnosticReport.category
    Definition

    A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.

    ShortService category
    Comments

    Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

    Control10..*
    BindingFor example codes, see DiagnosticServiceSectionCodeshttp://hl7.org/fhir/ValueSet/diagnostic-service-sections
    (example to http://hl7.org/fhir/ValueSet/diagnostic-service-sections)

    Codes for diagnostic service sections.

    TypeCodeableConcept
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Alternate NamesDepartment, Sub-department, Service, Discipline
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    SlicingThis element introduces a set of slices on DiagnosticReport.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
    • pattern @ $this
    • 14. DiagnosticReport.category:LaboratorySlice
      Slice NameLaboratorySlice
      Definition

      A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.

      ShortService category
      Comments

      Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

      Control10..1*
      BindingFor example codes, see DiagnosticServiceSectionCodeshttp://hl7.org/fhir/ValueSet/diagnostic-service-sections
      (example to http://hl7.org/fhir/ValueSet/diagnostic-service-sections)

      Codes for diagnostic service sections.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Alternate NamesDepartment, Sub-department, Service, Discipline
      Pattern Value{
        "coding" : [{
          "system" : "http://terminology.hl7.org/CodeSystem/v2-0074",
          "code" : "LAB"
        }]
      }
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      16. DiagnosticReport.code
      Definition

      The test, panel or battery that was ordered.


      A code or name that describes this diagnostic report.

      ShortUS Core Laboratory Report Order CodeName/Code for this diagnostic report
      Comments

      UsageNote= The typical patterns for codes are: 1) a LOINC code either as a translation from a "local" code or as a primary code, or 2) a local code only if no suitable LOINC exists, or 3) both the local and the LOINC translation. Systems SHALL be capable of sending the local code if one exists.

      Control1..1
      BindingUnless not suitable, these codes SHALL be taken from The codes SHOULD be taken from US Core Laboratory Test Codeshttp://hl7.org/fhir/ValueSet/report-codes
      (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-laboratory-test-codes)

      LOINC codes


      Codes that describe Diagnostic Reports.

      TypeCodeableConcept
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Alternate NamesType
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      18. DiagnosticReport.subject
      Definition

      The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources.

      ShortThe subject of the report - usually, but not always, the patient
      Control10..1
      TypeReference(US Core Patient Profile, Group, Device, US Core Location Profile, Patient, Location)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesReference(US Core Patient Profile)
      Summarytrue
      Requirements

      SHALL know the subject context.

      Alternate NamesPatient
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      20. DiagnosticReport.encounter
      Definition

      The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about.

      ShortEncounter associated with DiagnosticReportHealth care event when test ordered
      Comments

      This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

      Control0..1
      TypeReference(US Core Encounter Profile, Encounter)
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Requirements

      Links the request to the Encounter context.

      Alternate NamesContext
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      22. DiagnosticReport.effective[x]
      Definition

      The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself.

      ShortDiagnostically relevant time (typically the time of specimen collection)Clinically relevant time/time-period for report
      Comments

      If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic.

      Control0..1
      This element is affected by the following invariants: us-core-8
      TypeChoice of: dateTime, Period
      [x] NoteSee Choice of Data Types for further information about how to use [x]
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Must Support TypesdateTime
      Summarytrue
      Requirements

      Need to know where in the patient history to file/present this report.

      Alternate NamesObservation time, Effective Time, Occurrence
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      24. DiagnosticReport.issued
      Definition

      The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified.

      ShortWhen the report was releasedDateTime this version was made
      Comments

      May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report.

      Control0..1
      This element is affected by the following invariants: us-core-9
      Typeinstant
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Must Supporttrue
      Summarytrue
      Requirements

      Clinicians need to be able to check the date that the report was released.

      Alternate NamesDate published, Date Issued, Date Verified
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      26. DiagnosticReport.performer
      Definition

      The diagnostic service that is responsible for issuing the report.

      ShortResponsible Diagnostic Service
      Comments

      This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report.

      Control0..*
      TypeReference(US Core Practitioner Profile, US Core Organization Profile, US Core CareTeam Profile, US Core PractitionerRole Profile, Practitioner, PractitionerRole, Organization, CareTeam)
      Is Modifierfalse
      Must Supporttrue
      Must Support TypesReference(US Core Practitioner Profile)
      Summarytrue
      Requirements

      Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

      Alternate NamesLaboratory, Service, Practitioner, Department, Company, Authorized by, Director
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      28. DiagnosticReport.result
      Definition

      Observations that are part of this diagnostic report.

      ShortObservations
      Comments

      Observations can contain observations.

      Control0..*
      TypeReference(US Core Laboratory Result Observation Profile, Observation)
      Is Modifierfalse
      Must Supporttrue
      Summaryfalse
      Requirements

      Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful.

      Alternate NamesData, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

      Guidance on how to interpret the contents of this table can be found here

      0. DiagnosticReport
      Definition

      The findings and interpretation of diagnostic tests performed on patients, groups of patients, devices, and locations, and/or specimens derived from these. The report includes clinical context such as requesting and provider information, and some mix of atomic results, images, textual and coded interpretations, and formatted representation of diagnostic reports.

      ShortA Diagnostic report - a combination of request information, atomic results, images, interpretation, as well as formatted reports
      Comments

      This is intended to capture a single report and is not suitable for use in displaying summary information that covers multiple reports. For example, this resource has not been designed for laboratory cumulative reporting formats nor detailed structured reports for sequencing.

      Control0..*
      Is Modifierfalse
      Must Supportfalse
      Summaryfalse
      Alternate NamesReport, Test, Result, Results, Labs, Laboratory, Lab Result, Lab Report
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
      dom-6: A resource should have narrative for robust management (text.`div`.exists())
      us-core-8: effective[x] SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies effective.exists())
      us-core-9: issued SHALL be present if the status is 'partial', 'preliminary', 'final', 'amended', 'corrected' or 'appended' ((status='partial' or status='preliminary' or status='final' or status='amended' or status='corrected' or status='appended' ) implies issued.exists())
      2. DiagnosticReport.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Is Modifierfalse
      Summarytrue
      4. DiagnosticReport.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Is Modifierfalse
      Must Supporttrue
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      6. DiagnosticReport.meta.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      8. DiagnosticReport.meta.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      SlicingThis element introduces a set of slices on DiagnosticReport.meta.extension. The slices are unordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 10. DiagnosticReport.meta.versionId
        Definition

        The version specific identifier, as it appears in the version portion of the URL. This value changes when the resource is created, updated, or deleted.

        ShortVersion specific identifier
        Comments

        The server assigns this value, and ignores what the client specifies, except in the case that the server is imposing version integrity on updates/deletes.

        Control0..1
        Typeid
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        12. DiagnosticReport.meta.lastUpdated
        Definition

        When the resource last changed - e.g. when the version changed.

        ShortWhen the resource last changed
        Comments

        This value is always populated except when the resource is first being created. The server / resource manager sets this value; what a client provides is irrelevant. This is equivalent to the HTTP Last-Modified and SHOULD have the same value on a read interaction.

        Control0..1
        Typeinstant
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        14. DiagnosticReport.meta.source
        Definition

        A uri that identifies the source system of the resource. This provides a minimal amount of Provenance information that can be used to track or differentiate the source of information in the resource. The source may identify another FHIR server, document, message, database, etc.

        ShortIdentifies where the resource comes from
        Comments

        In the provenance resource, this corresponds to Provenance.entity.what[x]. The exact use of the source (and the implied Provenance.entity.role) is left to implementer discretion. Only one nominated source is allowed; for additional provenance details, a full Provenance resource should be used.

        This element can be used to indicate where the current master source of a resource that has a canonical URL if the resource is no longer hosted at the canonical URL.

        Control0..1
        Typeuri
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        16. DiagnosticReport.meta.profile
        Definition

        A list of profiles (references to StructureDefinition resources) that this resource claims to conform to. The URL is a reference to StructureDefinition.url.

        ShortProfiles this resource claims to conform to
        Comments

        It is up to the server and/or other infrastructure of policy to determine whether/how these claims are verified and/or updated over time. The list of profile URLs is a set.

        Control0..*
        Typecanonical(StructureDefinition)
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        18. DiagnosticReport.meta.security
        Definition

        Security labels applied to this resource. These tags connect specific resources to the overall security policy and infrastructure.

        ShortSecurity Labels applied to this resource
        Comments

        The security labels can be updated without changing the stated version of the resource. The list of security labels is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingUnless not suitable, these codes SHALL be taken from All Security Labels
        (extensible to http://hl7.org/fhir/ValueSet/security-labels)

        Security Labels from the Healthcare Privacy and Security Classification System.

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        20. DiagnosticReport.meta.tag
        Definition

        Tags applied to this resource. Tags are intended to be used to identify and relate resources to process and workflow, and applications are not required to consider the tags when interpreting the meaning of a resource.

        ShortTags applied to this resource
        Comments

        The tags can be updated without changing the stated version of the resource. The list of tags is a set. Uniqueness is based the system/code, and version and display are ignored.

        Control0..*
        BindingFor example codes, see CommonTags
        (example to http://hl7.org/fhir/ValueSet/common-tags)

        Codes that represent various types of tags, commonly workflow-related; e.g. "Needs review by Dr. Jones".

        TypeCoding
        Is Modifierfalse
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        22. DiagnosticReport.implicitRules
        Definition

        A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

        ShortA set of rules under which this content was created
        Comments

        Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

        Control0..1
        Typeuri
        Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        24. DiagnosticReport.language
        Definition

        The base language in which the resource is written.

        ShortLanguage of the resource content
        Comments

        Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

        Control0..1
        BindingThe codes SHOULD be taken from CommonLanguages
        (preferred to http://hl7.org/fhir/ValueSet/languages)

        A human language.

        Additional BindingsPurpose
        AllLanguagesMax Binding
        Typecode
        Is Modifierfalse
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summaryfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        26. DiagnosticReport.text
        Definition

        A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

        ShortText summary of the resource, for human interpretation
        Comments

        Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

        Control0..1
        TypeNarrative
        Is Modifierfalse
        Summaryfalse
        Alternate Namesnarrative, html, xhtml, display
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        28. DiagnosticReport.contained
        Definition

        These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

        ShortContained, inline Resources
        Comments

        This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

        Control0..*
        TypeResource
        Is Modifierfalse
        Summaryfalse
        Alternate Namesinline resources, anonymous resources, contained resources
        30. DiagnosticReport.extension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

        ShortAdditional content defined by implementations
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifierfalse
        Summaryfalse
        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. DiagnosticReport.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
        Summaryfalse
        Requirements

        Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

        Alternate Namesextensions, user content
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. DiagnosticReport.identifier
        Definition

        Identifiers assigned to this report by the performer or other systems.

        ShortBusiness identifier for report
        Comments

        Usually assigned by the Information System of the diagnostic service provider (filler id).

        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Is Modifierfalse
        Summarytrue
        Requirements

        Need to know what identifier to use when making queries about this report from the source laboratory, and for linking to the report outside FHIR context.

        Alternate NamesReportID, Filler ID, Placer ID
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        36. DiagnosticReport.basedOn
        Definition

        Details concerning a service requested.

        ShortWhat was requested
        Comments

        Note: Usually there is one test request for each result, however in some circumstances multiple test requests may be represented using a single test result resource. Note that there are also cases where one request leads to multiple reports.

        Control0..*
        TypeReference(CarePlan, ImmunizationRecommendation, MedicationRequest, NutritionOrder, ServiceRequest)
        Is Modifierfalse
        Summaryfalse
        Requirements

        This allows tracing of authorization for the report and tracking whether proposals/recommendations were acted upon.

        Alternate NamesRequest
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        38. DiagnosticReport.status
        Definition

        The status of the diagnostic report.

        Shortregistered | partial | preliminary | final +
        Control1..1
        This element is affected by the following invariants: us-core-8, us-core-9
        BindingThe codes SHALL be taken from DiagnosticReportStatus
        (required to http://hl7.org/fhir/ValueSet/diagnostic-report-status)
        Typecode
        Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Must Supporttrue
        Summarytrue
        Requirements

        Diagnostic services routinely issue provisional/incomplete reports, and sometimes withdraw previously released reports.

        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        40. DiagnosticReport.category
        Definition

        A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.

        ShortService category
        Comments

        Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

        Control1..*
        BindingFor example codes, see DiagnosticServiceSectionCodes
        (example to http://hl7.org/fhir/ValueSet/diagnostic-service-sections)

        Codes for diagnostic service sections.

        TypeCodeableConcept
        Is Modifierfalse
        Must Supporttrue
        Summarytrue
        Alternate NamesDepartment, Sub-department, Service, Discipline
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
        SlicingThis element introduces a set of slices on DiagnosticReport.category. The slices are unordered and Open, and can be differentiated using the following discriminators:
        • pattern @ $this
        • 42. DiagnosticReport.category:LaboratorySlice
          Slice NameLaboratorySlice
          Definition

          A code that classifies the clinical discipline, department or diagnostic service that created the report (e.g. cardiology, biochemistry, hematology, MRI). This is used for searching, sorting and display purposes.

          ShortService category
          Comments

          Multiple categories are allowed using various categorization schemes. The level of granularity is defined by the category concepts in the value set. More fine-grained filtering can be performed using the metadata and/or terminology hierarchy in DiagnosticReport.code.

          Control1..1
          BindingFor example codes, see DiagnosticServiceSectionCodes
          (example to http://hl7.org/fhir/ValueSet/diagnostic-service-sections)

          Codes for diagnostic service sections.

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Alternate NamesDepartment, Sub-department, Service, Discipline
          Pattern Value{
            "coding" : [{
              "system" : "http://terminology.hl7.org/CodeSystem/v2-0074",
              "code" : "LAB"
            }]
          }
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          44. DiagnosticReport.code
          Definition

          The test, panel or battery that was ordered.

          ShortUS Core Laboratory Report Order Code
          Comments

          UsageNote= The typical patterns for codes are: 1) a LOINC code either as a translation from a "local" code or as a primary code, or 2) a local code only if no suitable LOINC exists, or 3) both the local and the LOINC translation. Systems SHALL be capable of sending the local code if one exists.

          Control1..1
          BindingUnless not suitable, these codes SHALL be taken from US Core Laboratory Test Codes
          (extensible to http://hl7.org/fhir/us/core/ValueSet/us-core-laboratory-test-codes)

          LOINC codes

          TypeCodeableConcept
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Alternate NamesType
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          46. DiagnosticReport.subject
          Definition

          The subject of the report. Usually, but not always, this is a patient. However, diagnostic services also perform analyses on specimens collected from a variety of other sources.

          ShortThe subject of the report - usually, but not always, the patient
          Control1..1
          TypeReference(US Core Patient Profile, Group, Device, US Core Location Profile)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesReference(US Core Patient Profile)
          Summarytrue
          Requirements

          SHALL know the subject context.

          Alternate NamesPatient
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          48. DiagnosticReport.encounter
          Definition

          The healthcare event (e.g. a patient and healthcare provider interaction) which this DiagnosticReport is about.

          ShortEncounter associated with DiagnosticReport
          Comments

          This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter but still be tied to the context of the encounter (e.g. pre-admission laboratory tests).

          Control0..1
          TypeReference(US Core Encounter Profile)
          Is Modifierfalse
          Must Supporttrue
          Summarytrue
          Requirements

          Links the request to the Encounter context.

          Alternate NamesContext
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          50. DiagnosticReport.effective[x]
          Definition

          The time or time-period the observed values are related to. When the subject of the report is a patient, this is usually either the time of the procedure or of specimen collection(s), but very often the source of the date/time is not known, only the date/time itself.

          ShortDiagnostically relevant time (typically the time of specimen collection)
          Comments

          If the diagnostic procedure was performed on the patient, this is the time it was performed. If there are specimens, the diagnostically relevant time can be derived from the specimen collection times, but the specimen information is not always available, and the exact relationship between the specimens and the diagnostically relevant time is not always automatic.

          Control0..1
          This element is affected by the following invariants: us-core-8
          TypeChoice of: dateTime, Period
          [x] NoteSee Choice of Data Types for further information about how to use [x]
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Must Support TypesdateTime
          Summarytrue
          Requirements

          Need to know where in the patient history to file/present this report.

          Alternate NamesObservation time, Effective Time, Occurrence
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          52. DiagnosticReport.issued
          Definition

          The date and time that this version of the report was made available to providers, typically after the report was reviewed and verified.

          ShortWhen the report was released
          Comments

          May be different from the update time of the resource itself, because that is the status of the record (potentially a secondary copy), not the actual release time of the report.

          Control0..1
          This element is affected by the following invariants: us-core-9
          Typeinstant
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Must Supporttrue
          Summarytrue
          Requirements

          Clinicians need to be able to check the date that the report was released.

          Alternate NamesDate published, Date Issued, Date Verified
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          54. DiagnosticReport.performer
          Definition

          The diagnostic service that is responsible for issuing the report.

          ShortResponsible Diagnostic Service
          Comments

          This is not necessarily the source of the atomic data items or the entity that interpreted the results. It is the entity that takes responsibility for the clinical report.

          Control0..*
          TypeReference(US Core Practitioner Profile, US Core Organization Profile, US Core CareTeam Profile, US Core PractitionerRole Profile)
          Is Modifierfalse
          Must Supporttrue
          Must Support TypesReference(US Core Practitioner Profile)
          Summarytrue
          Requirements

          Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

          Alternate NamesLaboratory, Service, Practitioner, Department, Company, Authorized by, Director
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          56. DiagnosticReport.resultsInterpreter
          Definition

          The practitioner or organization that is responsible for the report's conclusions and interpretations.

          ShortPrimary result interpreter
          Comments

          Might not be the same entity that takes responsibility for the clinical report.

          Control0..*
          TypeReference(Practitioner, PractitionerRole, Organization, CareTeam)
          Is Modifierfalse
          Summarytrue
          Requirements

          Need to know whom to contact if there are queries about the results. Also may need to track the source of reports for secondary data analysis.

          Alternate NamesAnalyzed by, Reported by
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          58. DiagnosticReport.specimen
          Definition

          Details about the specimens on which this diagnostic report is based.

          ShortSpecimens this report is based on
          Comments

          If the specimen is sufficiently specified with a code in the test result name, then this additional data may be redundant. If there are multiple specimens, these may be represented per observation or group.

          Control0..*
          TypeReference(Specimen)
          Is Modifierfalse
          Summaryfalse
          Requirements

          Need to be able to report information about the collected specimens on which the report is based.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          60. DiagnosticReport.result
          Definition

          Observations that are part of this diagnostic report.

          ShortObservations
          Comments

          Observations can contain observations.

          Control0..*
          TypeReference(US Core Laboratory Result Observation Profile)
          Is Modifierfalse
          Must Supporttrue
          Summaryfalse
          Requirements

          Need to support individual results, or groups of results, where the result grouping is arbitrary, but meaningful.

          Alternate NamesData, Atomic Value, Result, Atomic result, Data, Test, Analyte, Battery, Organizer
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          62. DiagnosticReport.imagingStudy
          Definition

          One or more links to full details of any imaging performed during the diagnostic investigation. Typically, this is imaging performed by DICOM enabled modalities, but this is not required. A fully enabled PACS viewer can use this information to provide views of the source images.

          ShortReference to full details of imaging associated with the diagnostic report
          Comments

          ImagingStudy and the image element are somewhat overlapping - typically, the list of image references in the image element will also be found in one of the imaging study resources. However, each caters to different types of displays for different types of purposes. Neither, either, or both may be provided.

          Control0..*
          TypeReference(ImagingStudy)
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          64. DiagnosticReport.media
          Definition

          A list of key images associated with this report. The images are generally created during the diagnostic process, and may be directly of the patient, or of treated specimens (i.e. slides of interest).

          ShortKey images associated with this report
          Control0..*
          TypeBackboneElement
          Is Modifierfalse
          Summarytrue
          Requirements

          Many diagnostic services include images in the report as part of their service.

          Alternate NamesDICOM, Slides, Scans
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          66. DiagnosticReport.media.id
          Definition

          Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

          ShortUnique id for inter-element referencing
          Control0..1
          Typestring
          Is Modifierfalse
          XML FormatIn the XML format, this property is represented as an attribute.
          Summaryfalse
          68. DiagnosticReport.media.extension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

          ShortAdditional content defined by implementations
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifierfalse
          Summaryfalse
          Alternate Namesextensions, user content
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          70. DiagnosticReport.media.modifierExtension
          Definition

          May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

          Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

          ShortExtensions that cannot be ignored even if unrecognized
          Comments

          There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

          Control0..*
          TypeExtension
          Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
          Summarytrue
          Requirements

          Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

          Alternate Namesextensions, user content, modifiers
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
          72. DiagnosticReport.media.comment
          Definition

          A comment about the image. Typically, this is used to provide an explanation for why the image is included, or to draw the viewer's attention to important features.

          ShortComment about the image (e.g. explanation)
          Comments

          The comment should be displayed with the image. It would be common for the report to include additional discussion of the image contents in other sections such as the conclusion.

          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          The provider of the report should make a comment about each image included in the report.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          74. DiagnosticReport.media.link
          Definition

          Reference to the image source.

          ShortReference to the image source
          Control1..1
          TypeReference(Media)
          Is Modifierfalse
          Summarytrue
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          76. DiagnosticReport.conclusion
          Definition

          Concise and clinically contextualized summary conclusion (interpretation/impression) of the diagnostic report.

          ShortClinical conclusion (interpretation) of test results
          Control0..1
          Typestring
          Is Modifierfalse
          Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
          Summaryfalse
          Requirements

          Need to be able to provide a conclusion that is not lost among the basic result data.

          Alternate NamesReport
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          78. DiagnosticReport.conclusionCode
          Definition

          One or more codes that represent the summary conclusion (interpretation/impression) of the diagnostic report.

          ShortCodes for the clinical conclusion of test results
          Control0..*
          BindingFor example codes, see SNOMEDCTClinicalFindings
          (example to http://hl7.org/fhir/ValueSet/clinical-findings)

          Diagnosis codes provided as adjuncts to the report.

          TypeCodeableConcept
          Is Modifierfalse
          Summaryfalse
          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
          80. DiagnosticReport.presentedForm
          Definition

          Rich text representation of the entire result as issued by the diagnostic service. Multiple formats are allowed but they SHALL be semantically equivalent.

          ShortEntire report as issued
          Comments

          "application/pdf" is recommended as the most reliable and interoperable in this context.

          Control0..*
          TypeAttachment
          Is Modifierfalse
          Summaryfalse
          Requirements

          Gives laboratory the ability to provide its own fully formatted report for clinical fidelity.

          Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))