R4 Ballot #1 (Mixed Normative/Trial use)
DiagnosticsThis page is part of the FHIR Specification (v3.3.0: R4 Ballot 2). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions 
. Page versions: R5 R4B R4 R3
| (No assigned work group) | Maturity Level: 1 | Informative | Use Context: Any |
StructureDefinition for FHIR Vital Signs Profile
{
"resourceType": "StructureDefinition",
"id": "vitalsigns",
"text": {
"status": "generated",
"div": "<div>!-- Snipped for Brevity --></div>"
},
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-ballot-status",
"valueString": "Trial Use"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-summary",
"valueMarkdown": "\"#### Complete Summary of the Mandatory Requirements\n\n1. One status in `Observation.status`which has a [required](http://build.fhir.org/terminologies.html#extensible) binding to:\n - [ObservationStatus] value set.\n1. A category in `Observation.category` which must have:\n - a fixed `Observation.category.coding.system`=\"\"http://hl7.org/fhir/observation-category\"\"\n - a fixed `Observation.category.coding.code`= \"\"vital-signs\"\"\n\n1. A code in `Observation.code`\n - a fixed `Observation.code.coding.system`= \"\"http://loinc.org\"\"\n - a LOINC code in `Observation.code.coding.code` which has an [extensible](http://build.fhir.org/terminologies.html#extensible) binding to:\n - [Vital Signs] value set.\n \n1. One patient in `Observation.subject`\n1. A date and time in `effectiveDateTime` or `effectivePeriod`\n1. Either one `Observation.value[x]` or, if there is no value, one code in `Observation.DataAbsentReason`\n - if a vital sign measure then:\n - One numeric value in Observation.valueQuantity.value\n - a fixed Observation.valueQuantity.system=\"http://unitsofmeasure\"\n - a UCUM unit code in Observation.valueQuantity.code which has an required binding to the [Vital Signs Units] value set.\n - Observation.DataAbsentReason is bound to [Observation Value\n Absent Reason] value set.\n\n1. When using a panel code to group component observations (Note: See\n the comments regarding blood pressure in the table above), one or\n more `Observation.component.code` each of which must have:\n - a fixed\n `Observation.component.code.coding.system` =\"\"http://loinc.org\"\"\n - a LOINC code in `Observation.code.coding.code` which has an [extensible] binding to:\n - [Vital Signs Units] value set.\n\n1. Either one `Observation.component.valueQuantity` or, if there is\n no value, one code in `Observation.component.DataAbsentReason`\n - Observation.component.DataAbsentReason is bound to [Observation\n Value Absent Reason] value set.\n\n1. When using a panel code to group observations, one or more reference\n to Vitals Signs Observations in `Observation.related.target`\n - a fixed `Observation.related.type`= \"\"has-member\"\"\n\n [Vital Signs]: valueset-observation-vitalsignresult.html\n [Vital Signs Units]: valueset-ucum-vitals-common.html\n [extensible]: terminologies.html#extensible\n [ObservationStatus]: valueset-observation-status.html\n [Observation Value Absent Reason]: valueset-data-absent-reason.html\n[required]: terminologies.html#required\""
}
],
"url": "http://hl7.org/fhir/StructureDefinition/vitalsigns",
"name": "Vital Signs Profile",
"title": "VitalSigns",
"status": "draft",
"experimental": false,
"date": "2016-03-25",
"publisher": "Health Level Seven International (Orders and Observations Workgroup)",
"contact": [
{
"telecom": [
{
"system": "url",
"value": "http://www.hl7.org/Special/committees/orders/index.cfm Orders and Observations"
}
]
}
],
"description": "FHIR Vital Signs Profile",
"fhirVersion": "3.3.0",
"mapping": [
{
"identity": "workflow",
"uri": "http://hl7.org/fhir/workflow",
"name": "Workflow Pattern"
},
{
"identity": "sct-concept",
"uri": "http://snomed.info/conceptdomain",
"name": "SNOMED CT Concept Domain Binding"
},
{
"identity": "v2",
"uri": "http://hl7.org/v2",
"name": "HL7 v2 Mapping"
},
{
"identity": "rim",
"uri": "http://hl7.org/v3",
"name": "RIM Mapping"
},
{
"identity": "w5",
"uri": "http://hl7.org/fhir/fivews",
"name": "FiveWs Pattern"
},
{
"identity": "sct-attr",
"uri": "http://snomed.info/sct",
"name": "SNOMED CT Attribute Binding"
}
],
"kind": "resource",
"abstract": false,
"type": "Observation",
"baseDefinition": "http://hl7.org/fhir/StructureDefinition/Observation",
"derivation": "constraint",
"snapshot": {
"element": [
{
"id": "Observation",
"path": "Observation",
"short": "FHIR Vital Signs Profile",
"definition": "The FHIR Vitals Signs profile sets minimum expectations for the Observation Resource to record, search and fetch the vital signs associated with a patient.",
"comment": "Used for simple observations such as device measurements, laboratory atomic results, vital signs, height, weight, smoking status, comments, etc. Other resources are used to provide context for observations such as laboratory reports, etc.",
"alias": [
"Vital Signs",
"Measurement",
"Results",
"Tests"
],
"min": 0,
"max": "*",
"base": {
"path": "Observation",
"min": 0,
"max": "*"
},
"constraint": [
{
"key": "dom-2",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL NOT contain nested Resources",
"expression": "contained.contained.empty()",
"xpath": "not(parent::f:contained and f:contained)",
"source": "DomainResource"
},
{
"key": "dom-1",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL NOT contain any narrative",
"expression": "contained.text.empty()",
"xpath": "not(parent::f:contained and f:text)",
"source": "DomainResource"
},
{
"key": "dom-4",
"severity": "error",
"human": "If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated",
"expression": "contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()",
"xpath": "not(exists(f:contained/*/f:meta/f:versionId)) and not(exists(f:contained/*/f:meta/f:lastUpdated))",
"source": "DomainResource"
},
{
"key": "dom-3",
"severity": "error",
"human": "If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource",
"expression": "contained.all(('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists())",
"xpath": "not(exists(for $contained in f:contained return $contained[not(parent::*/descendant::f:reference/@value=concat('#', $contained/*/id/@value) or descendant::f:reference[@value='#'])]))",
"source": "DomainResource"
},
{
"key": "obs-7",
"severity": "error",
"human": "If Observation.code is the same as a Observation.component.code then the value element associated with the code SHALL NOT be present",
"expression": "value.empty() or component.code.where( (coding.code = %resource.code.coding.code) and (coding.system = %resource.code.coding.system)).empty()",
"xpath": "not(f:*[starts-with(local-name(.), 'value')] and (for $coding in f:code/f:coding return f:component/f:code/f:coding[f:code/@value=$coding/f:code/@value] [f:system/@value=$coding/f:system/@value]))",
"source": "Observation"
},
{
"key": "obs-6",
"severity": "error",
"human": "dataAbsentReason SHALL only be present if Observation.value[x] is not present",
"expression": "dataAbsentReason.empty() or value.empty()",
"xpath": "not(exists(f:dataAbsentReason)) or (not(exists(*[starts-with(local-name(.), 'value')])))",
"source": "Observation"
},
{
"key": "vs-2",
"severity": "error",
"human": "If there is no component or hasMember element then either a value[x] or a data absent reason must be present.",
"expression": "(component.empty() and hasMember.empty()) implies (dataAbsentReason or value)",
"xpath": "f:component or f:memberOF or f:*[starts-with(local-name(.), 'value')] or f:dataAbsentReason"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "Entity. Role, or Act"
},
{
"identity": "workflow",
"map": "Event"
},
{
"identity": "sct-concept",
"map": "< 363787002 |Observable entity|"
},
{
"identity": "v2",
"map": "OBX"
},
{
"identity": "rim",
"map": "Observation[classCode=OBS, moodCode=EVN]"
}
]
},
{
"id": "Observation.id",
"path": "Observation.id",
"short": "Logical id of this artifact",
"definition": "The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.",
"comment": "The only time that a resource does not have an id is when it is being submitted to the server using a create operation.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "id"
}
],
"isModifier": false,
"isSummary": true
},
{
"id": "Observation.meta",
"path": "Observation.meta",
"short": "Metadata about the resource",
"definition": "The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.meta",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Meta"
}
],
"isModifier": false,
"isSummary": true
},
{
"id": "Observation.implicitRules",
"path": "Observation.implicitRules",
"short": "A set of rules under which this content was created",
"definition": "A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.",
"comment": "Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.",
"min": 0,
"max": "1",
"base": {
"path": "Resource.implicitRules",
"min": 0,
"max": "1"
},
"type": [
{
"code": "uri"
}
],
"isModifier": true,
"isModifierReason": "This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation",
"isSummary": true
},
{
"id": "Observation.language",
"path": "Observation.language",
"short": "Language of the resource content",
"definition": "The base language in which the resource is written.",
"comment": "Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).",
"min": 0,
"max": "1",
"base": {
"path": "Resource.language",
"min": 0,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-maxValueSet",
"valueReference": {
"reference": "http://hl7.org/fhir/ValueSet/all-languages"
}
},
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "Language"
},
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-isCommonBinding",
"valueBoolean": true
}
],
"strength": "extensible",
"description": "A human language.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/languages"
}
},
{
"id": "Observation.text",
"path": "Observation.text",
"short": "Text summary of the resource, for human interpretation",
"definition": "A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it \"clinically safe\" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.",
"comment": "Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a \"text blob\" or where text is additionally entered raw or narrated and encoded in formation is added later.",
"alias": [
"narrative",
"html",
"xhtml",
"display"
],
"min": 0,
"max": "1",
"base": {
"path": "DomainResource.text",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Narrative"
}
],
"condition": [
"dom-1"
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "Act.text?"
}
]
},
{
"id": "Observation.contained",
"path": "Observation.contained",
"short": "Contained, inline Resources",
"definition": "These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.",
"comment": "This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.",
"alias": [
"inline resources",
"anonymous resources",
"contained resources"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.contained",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Resource"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "Observation.extension",
"path": "Observation.extension",
"short": "Additional Content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "Observation.modifierExtension",
"path": "Observation.modifierExtension",
"short": "Extensions that cannot be ignored",
"definition": "May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "DomainResource.modifierExtension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": true,
"isModifierReason": "Not known why this is labelled a modifier",
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "Observation.identifier",
"path": "Observation.identifier",
"short": "Business Identifier for observation",
"definition": "A unique identifier assigned to this observation.",
"requirements": "Allows observations to be distinguished and referenced.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.identifier",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Identifier"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.identifier"
},
{
"identity": "w5",
"map": "FiveWs.identifier"
},
{
"identity": "v2",
"map": "OBX.21 For OBX segments from systems without OBX-21 support a combination of ORC/OBR and OBX must be negotiated between trading partners to uniquely identify the OBX segment. Depending on how V2 has been implemented each of these may be an option: 1) OBR-3 + OBX-3 + OBX-4 or 2) OBR-3 + OBR-4 + OBX-3 + OBX-4 or 2) some other way to uniquely ID the OBR/ORC + OBX-3 + OBX-4."
},
{
"identity": "rim",
"map": "id"
}
]
},
{
"id": "Observation.basedOn",
"path": "Observation.basedOn",
"short": "Fulfills plan, proposal or order",
"definition": "A plan, proposal or order that is fulfilled in whole or in part by this event.",
"requirements": "Allows tracing of authorization for the event and tracking whether proposals/recommendations were acted upon.",
"alias": [
"Fulfills"
],
"min": 0,
"max": "*",
"base": {
"path": "Observation.basedOn",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/CarePlan",
"http://hl7.org/fhir/StructureDefinition/DeviceRequest",
"http://hl7.org/fhir/StructureDefinition/ImmunizationRecommendation",
"http://hl7.org/fhir/StructureDefinition/MedicationRequest",
"http://hl7.org/fhir/StructureDefinition/NutritionOrder",
"http://hl7.org/fhir/StructureDefinition/ServiceRequest"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.basedOn"
},
{
"identity": "v2",
"map": "ORC"
},
{
"identity": "rim",
"map": ".inboundRelationship[typeCode=COMP].source[moodCode=EVN]"
}
]
},
{
"id": "Observation.partOf",
"path": "Observation.partOf",
"short": "Part of referenced event",
"definition": "A larger event of which this particular Observation is a component or step. For example, an observation as part of a procedure.",
"comment": "To link an Observation to an Encounter use `context`. See the [Notes](observation.html#obsgrouping) below for guidance on referencing another Observation.",
"alias": [
"Container"
],
"min": 0,
"max": "*",
"base": {
"path": "Observation.partOf",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/MedicationAdministration",
"http://hl7.org/fhir/StructureDefinition/MedicationDispense",
"http://hl7.org/fhir/StructureDefinition/MedicationStatement",
"http://hl7.org/fhir/StructureDefinition/Procedure",
"http://hl7.org/fhir/StructureDefinition/Immunization",
"http://hl7.org/fhir/StructureDefinition/ImagingStudy"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.partOf"
},
{
"identity": "v2",
"map": "Varies by domain"
},
{
"identity": "rim",
"map": ".outboundRelationship[typeCode=FLFS].target"
}
]
},
{
"id": "Observation.status",
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/structuredefinition-display-hint",
"valueString": "default: final"
}
],
"path": "Observation.status",
"short": "registered | preliminary | final | amended +",
"definition": "The status of the result value.",
"comment": "This element is labeled as a modifier because the status contains codes that mark the resource as not currently valid.",
"requirements": "Need to track the status of individual results. Some results are finalized before the whole report is finalized.",
"min": 1,
"max": "1",
"base": {
"path": "Observation.status",
"min": 1,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"mustSupport": true,
"isModifier": true,
"isModifierReason": "This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid",
"isSummary": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "Status"
}
],
"strength": "required",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-status"
},
"mapping": [
{
"identity": "workflow",
"map": "Event.status"
},
{
"identity": "w5",
"map": "FiveWs.status"
},
{
"identity": "sct-concept",
"map": "< 445584004 |Report by finality status|"
},
{
"identity": "v2",
"map": "OBX-11"
},
{
"identity": "rim",
"map": "status Amended & Final are differentiated by whether it is the subject of a ControlAct event with a type of \"revise\""
}
]
},
{
"id": "Observation.category",
"path": "Observation.category",
"slicing": {
"discriminator": [
{
"type": "value",
"path": "coding.code"
},
{
"type": "value",
"path": "coding.system"
}
],
"ordered": false,
"rules": "open"
},
"short": "Classification of type of observation",
"definition": "A code that classifies the general type of observation being made.",
"comment": "In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.",
"requirements": "Used for filtering what observations are retrieved and displayed.",
"min": 1,
"max": "*",
"base": {
"path": "Observation.category",
"min": 0,
"max": "*"
},
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationCategory"
}
],
"strength": "preferred",
"description": "Codes for high level observation categories.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-category"
},
"mapping": [
{
"identity": "w5",
"map": "FiveWs.class"
},
{
"identity": "rim",
"map": ".outboundRelationship[typeCode=\"COMP].target[classCode=\"LIST\", moodCode=\"EVN\"].code"
}
]
},
{
"id": "Observation.category:vscat",
"path": "Observation.category",
"sliceName": "VSCat",
"short": "Classification of type of observation",
"definition": "A code that classifies the general type of observation being made.",
"comment": "In addition to the required category valueset, this element allows various categorization schemes based on the owner’s definition of the category and effectively multiple categories can be used at once. The level of granularity is defined by the category concepts in the value set.",
"requirements": "Used for filtering what observations are retrieved and displayed.",
"min": 1,
"max": "1",
"base": {
"path": "Observation.category",
"min": 0,
"max": "*"
},
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationCategory"
}
],
"strength": "preferred",
"description": "Codes for high level observation categories.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-category"
},
"mapping": [
{
"identity": "w5",
"map": "FiveWs.class"
},
{
"identity": "rim",
"map": ".outboundRelationship[typeCode=\"COMP].target[classCode=\"LIST\", moodCode=\"EVN\"].code"
}
]
},
{
"id": "Observation.category:vscat.id",
"path": "Observation.category.id",
"representation": [
"xmlAttr"
],
"short": "xml:id (or equivalent in JSON)",
"definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"min": 0,
"max": "1",
"base": {
"path": "Element.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.category:vscat.extension",
"path": "Observation.category.extension",
"slicing": {
"discriminator": [
{
"type": "value",
"path": "url"
}
],
"description": "Extensions are always sliced by (at least) url",
"rules": "open"
},
"short": "Additional content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "Element.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.category:vscat.coding",
"path": "Observation.category.coding",
"short": "Code defined by a terminology system",
"definition": "A reference to a code defined by a terminology system.",
"comment": "Codes may be defined very casually in enumerations, or code lists, up to very formal definitions such as SNOMED CT - see the HL7 v3 Core Principles for more information. Ordering of codings is undefined and SHALL NOT be used to infer meaning. Generally, at most only one of the coding values will be labeled as UserSelected = true.",
"requirements": "Allows for translations and alternate encodings within a code system. Also supports communication of the same instance to systems requiring different encodings.",
"min": 1,
"max": "*",
"base": {
"path": "CodeableConcept.coding",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Coding"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.1-8, C*E.10-22"
},
{
"identity": "rim",
"map": "union(., ./translation)"
},
{
"identity": "orim",
"map": "fhir:CodeableConcept.coding rdfs:subPropertyOf dt:CD.coding"
}
]
},
{
"id": "Observation.category:vscat.coding.id",
"path": "Observation.category.coding.id",
"representation": [
"xmlAttr"
],
"short": "xml:id (or equivalent in JSON)",
"definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"min": 0,
"max": "1",
"base": {
"path": "Element.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.category:vscat.coding.extension",
"path": "Observation.category.coding.extension",
"slicing": {
"discriminator": [
{
"type": "value",
"path": "url"
}
],
"description": "Extensions are always sliced by (at least) url",
"rules": "open"
},
"short": "Additional content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "Element.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.category:vscat.coding.system",
"path": "Observation.category.coding.system",
"short": "Identity of the terminology system",
"definition": "The identification of the code system that defines the meaning of the symbol in the code.",
"comment": "The URI may be an OID (urn:oid:...) or a UUID (urn:uuid:...). OIDs and UUIDs SHALL be references to the HL7 OID registry. Otherwise, the URI should come from HL7's list of FHIR defined special URIs or it should reference to some definition that establishes the system clearly and unambiguously.",
"requirements": "Need to be unambiguous about the source of the definition of the symbol.",
"min": 1,
"max": "1",
"base": {
"path": "Coding.system",
"min": 0,
"max": "1"
},
"type": [
{
"code": "uri"
}
],
"fixedUri": "http://hl7.org/fhir/observation-category",
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.3"
},
{
"identity": "rim",
"map": "./codeSystem"
},
{
"identity": "orim",
"map": "fhir:Coding.system rdfs:subPropertyOf dt:CDCoding.codeSystem"
}
]
},
{
"id": "Observation.category:vscat.coding.version",
"path": "Observation.category.coding.version",
"short": "Version of the system - if relevant",
"definition": "The version of the code system which was used when choosing this code. Note that a well-maintained code system does not need the version reported, because the meaning of codes is consistent across versions. However this cannot consistently be assured, and when the meaning is not guaranteed to be consistent, the version SHOULD be exchanged.",
"comment": "Where the terminology does not clearly define what string should be used to identify code system versions, the recommendation is to use the date (expressed in FHIR date format) on which that version was officially published as the version date.",
"min": 0,
"max": "1",
"base": {
"path": "Coding.version",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.7"
},
{
"identity": "rim",
"map": "./codeSystemVersion"
},
{
"identity": "orim",
"map": "fhir:Coding.version rdfs:subPropertyOf dt:CDCoding.codeSystemVersion"
}
]
},
{
"id": "Observation.category:vscat.coding.code",
"path": "Observation.category.coding.code",
"short": "Symbol in syntax defined by the system",
"definition": "A symbol in syntax defined by the system. The symbol may be a predefined code or an expression in a syntax defined by the coding system (e.g. post-coordination).",
"requirements": "Need to refer to a particular code in the system.",
"min": 1,
"max": "1",
"base": {
"path": "Coding.code",
"min": 0,
"max": "1"
},
"type": [
{
"code": "code"
}
],
"fixedCode": "vital-signs",
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.1"
},
{
"identity": "rim",
"map": "./code"
},
{
"identity": "orim",
"map": "fhir:Coding.code rdfs:subPropertyOf dt:CDCoding.code"
}
]
},
{
"id": "Observation.category:vscat.coding.display",
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable",
"valueBoolean": true
}
],
"path": "Observation.category.coding.display",
"short": "Representation defined by the system",
"definition": "A representation of the meaning of the code in the system, following the rules of the system.",
"requirements": "Need to be able to carry a human-readable meaning of the code for readers that do not know the system.",
"min": 0,
"max": "1",
"base": {
"path": "Coding.display",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.2 - but note this is not well followed"
},
{
"identity": "rim",
"map": "CV.displayName"
},
{
"identity": "orim",
"map": "fhir:Coding.display rdfs:subPropertyOf dt:CDCoding.displayName"
}
]
},
{
"id": "Observation.category:vscat.coding.userSelected",
"path": "Observation.category.coding.userSelected",
"short": "If this coding was chosen directly by the user",
"definition": "Indicates that this coding was chosen by a user directly - i.e. off a pick list of available items (codes or displays).",
"comment": "Amongst a set of alternatives, a directly chosen code is the most appropriate starting point for new translations. There is some ambiguity about what exactly 'directly chosen' implies, and trading partner agreement may be needed to clarify the use of this element and its consequences more completely.",
"requirements": "This has been identified as a clinical safety criterium - that this exact system/code pair was chosen explicitly, rather than inferred by the system based on some rules or language processing.",
"min": 0,
"max": "1",
"base": {
"path": "Coding.userSelected",
"min": 0,
"max": "1"
},
"type": [
{
"code": "boolean"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "Sometimes implied by being first"
},
{
"identity": "rim",
"map": "CD.codingRationale"
},
{
"identity": "orim",
"map": "fhir:Coding.userSelected fhir:mapsTo dt:CDCoding.codingRationale. fhir:Coding.userSelected fhir:hasMap fhir:Coding.userSelected.map. fhir:Coding.userSelected.map a fhir:Map; fhir:target dt:CDCoding.codingRationale. fhir:Coding.userSelected\\#true a [ fhir:source \"true\"; fhir:target dt:CDCoding.codingRationale\\#O ]"
}
]
},
{
"id": "Observation.category:vscat.text",
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-translatable",
"valueBoolean": true
}
],
"path": "Observation.category.text",
"short": "Plain text representation of the concept",
"definition": "A human language representation of the concept as seen/selected/uttered by the user who entered the data and/or which represents the intended meaning of the user.",
"comment": "Very often the text is the same as a displayName of one of the codings.",
"requirements": "The codes from the terminologies do not always capture the correct meaning with all the nuances of the human using them, or sometimes there is no appropriate code at all. In these cases, the text is used to capture the full meaning of the source.",
"min": 0,
"max": "1",
"base": {
"path": "CodeableConcept.text",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "C*E.9. But note many systems use C*E.2 for this"
},
{
"identity": "rim",
"map": "./originalText[mediaType/code=\"text/plain\"]/data"
},
{
"identity": "orim",
"map": "fhir:CodeableConcept.text rdfs:subPropertyOf dt:CD.originalText"
}
]
},
{
"id": "Observation.code",
"path": "Observation.code",
"short": "Coded Responses from C-CDA Vital Sign Results",
"definition": "Coded Responses from C-CDA Vital Sign Results.",
"comment": "*All* code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.",
"requirements": "5. SHALL contain exactly one [1..1] code, where the @code SHOULD be selected from ValueSet HITSP Vital Sign Result Type 2.16.840.1.113883.3.88.12.80.62 DYNAMIC (CONF:7301).",
"alias": [
"Name"
],
"min": 1,
"max": "1",
"base": {
"path": "Observation.code",
"min": 1,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSigns"
}
],
"strength": "extensible",
"description": "This identifies the vital sign result type.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-vitalsignresult"
},
"mapping": [
{
"identity": "workflow",
"map": "Event.code"
},
{
"identity": "w5",
"map": "FiveWs.what[x]"
},
{
"identity": "sct-concept",
"map": "< 363787002 |Observable entity| OR < 386053000 |Evaluation procedure|"
},
{
"identity": "v2",
"map": "OBX-3"
},
{
"identity": "rim",
"map": "code"
},
{
"identity": "sct-attr",
"map": "116680003 |Is a|"
}
]
},
{
"id": "Observation.subject",
"path": "Observation.subject",
"short": "Who and/or what this is about",
"definition": "The patient, or group of patients, location, or device whose characteristics (direct or indirect) are described by the observation and into whose record the observation is placed. Comments: Indirect characteristics may be those of a specimen, fetus, donor, other observer (for example a relative or EMT), or any observation made about the subject.",
"comment": "One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated \r\rIf theactual focus of the observation is different than the subject, the`focus` element may be used. However, the distinction between the patient's own value for an observation versus that of the fetus, or the donor or blood product unit, etc., are often specified in the observation code.",
"requirements": "Observations have no value if you don't know who or what they're about.",
"min": 1,
"max": "1",
"base": {
"path": "Observation.subject",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Patient"
]
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.subject"
},
{
"identity": "w5",
"map": "FiveWs.subject[x]"
},
{
"identity": "v2",
"map": "PID-3"
},
{
"identity": "rim",
"map": "participation[typeCode=RTGT] "
},
{
"identity": "w5",
"map": "FiveWs.subject"
}
]
},
{
"id": "Observation.focus",
"path": "Observation.focus",
"short": "The \"focal point\" of the observation",
"definition": "The actual focus of an observation when it is not the patient of record. The focus is point of attention when the observation representing something or someone associated with the patient. It could be a spouse or parent, a fetus or donor. The focus of an observation could be an existing condition, an intervention, the subject's diet, another observation of the subject, or a body structure such as tumor or implanted device. An example use case would be using the Observation resource to capture whether the mother is trained to change her child's tracheostomy tube. In this example, the child is the patient of record and the mother is the focus.",
"comment": "Typically, an observation is made about the subject - a patient, or group of patients, location, or device - and the distinction between the subject and what is directly measured for an observation is specified in the observation code itself ( e.g., \"Blood Glucose\") and does not need to be represented separately using this element. Use `specimen` if a reference to a specimen is required. If a code is required instead of a resource use either `bodysite` for bodysites or the standard extension [focus-code](extension-observation-focus-code.html).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.focus",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Resource"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "w5",
"map": "FiveWs.subject[x]"
},
{
"identity": "v2",
"map": "OBX-3"
},
{
"identity": "rim",
"map": "participation[typeCode=SBJ]"
},
{
"identity": "w5",
"map": "FiveWs.subject"
}
]
},
{
"id": "Observation.context",
"path": "Observation.context",
"short": "Healthcare event during which this observation is made",
"definition": "The healthcare event (e.g. a patient and healthcare provider interaction) during which this observation is made.",
"comment": "This will typically be the encounter the event occurred within, but some events may be initiated prior to or after the official completion of an encounter or episode but still be tied to the context of the encounter or episode (e.g. pre-admission laboratory tests).",
"requirements": "For some observations it may be important to know the link between an observation and a particular encounter.",
"alias": [
"Encounter"
],
"min": 0,
"max": "1",
"base": {
"path": "Observation.context",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Encounter",
"http://hl7.org/fhir/StructureDefinition/EpisodeOfCare"
]
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "workflow",
"map": "Event.context"
},
{
"identity": "w5",
"map": "FiveWs.context"
},
{
"identity": "v2",
"map": "PV1"
},
{
"identity": "rim",
"map": "inboundRelationship[typeCode=COMP].source[classCode=ENC, moodCode=EVN]"
}
]
},
{
"id": "Observation.effective[x]",
"path": "Observation.effective[x]",
"short": "Often just a dateTime for Vital Signs",
"definition": "Often just a dateTime for Vital Signs.",
"comment": "At least a date should be present unless this observation is a historical report. For recording imprecise or \"fuzzy\" times (For example, a blood glucose measurement taken \"after breakfast\") use the [Timing](datatypes.html#timing) datatype which allow the measurement to be tied to regular life events.",
"requirements": "Knowing when an observation was deemed true is important to its relevance as well as determining trends.",
"alias": [
"Occurrence"
],
"min": 1,
"max": "1",
"base": {
"path": "Observation.effective[x]",
"min": 0,
"max": "1"
},
"type": [
{
"code": "dateTime"
},
{
"code": "Period"
}
],
"constraint": [
{
"key": "vs-1",
"severity": "error",
"human": "Datetime must be at least to day.",
"expression": "($this as dateTime).toString().length() >= 8",
"xpath": "f:matches(effectiveDateTime,/\\d{4}-[01]\\d-[0-3]\\dT[0-2]\\d:[0-5]\\d([+-][0-2]\\d:[0-5]\\d|Z)/)"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.occurrence[x]"
},
{
"identity": "w5",
"map": "FiveWs.done[x]"
},
{
"identity": "v2",
"map": "OBX-14, and/or OBX-19 after v2.4 (depends on who observation made)"
},
{
"identity": "rim",
"map": "effectiveTime"
}
]
},
{
"id": "Observation.issued",
"path": "Observation.issued",
"short": "Date/Time this version was made available",
"definition": "The date and time this version of the observation was made available to providers, typically after the results have been reviewed and verified.",
"comment": "For Observations that don’t require review and verification, it may be the same as the [`lastUpdated` ](resource-definitions.html#Meta.lastUpdated) time of the resource itself. For Observations that do require review and verification for certain updates, it might not be the same as the `lastUpdated` time of the resource itself due to a non-clinically significant update that doesn’t require the new version to be reviewed and verified again.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.issued",
"min": 0,
"max": "1"
},
"type": [
{
"code": "instant"
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "w5",
"map": "FiveWs.recorded"
},
{
"identity": "v2",
"map": "OBR.22 (or MSH.7), or perhaps OBX-19 (depends on who observation made)"
},
{
"identity": "rim",
"map": "participation[typeCode=AUT].time"
}
]
},
{
"id": "Observation.performer",
"path": "Observation.performer",
"short": "Who is responsible for the observation",
"definition": "Who was responsible for asserting the observed value as \"true\".",
"requirements": "May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.performer",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Practitioner",
"http://hl7.org/fhir/StructureDefinition/PractitionerRole",
"http://hl7.org/fhir/StructureDefinition/Organization",
"http://hl7.org/fhir/StructureDefinition/CareTeam",
"http://hl7.org/fhir/StructureDefinition/Patient",
"http://hl7.org/fhir/StructureDefinition/RelatedPerson"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "workflow",
"map": "Event.performer.actor"
},
{
"identity": "w5",
"map": "FiveWs.actor"
},
{
"identity": "v2",
"map": "OBX.15 / (Practitioner) OBX-16, PRT-5:PRT-4='RO' / (Device) OBX-18 , PRT-10:PRT-4='EQUIP' / (Organization) OBX-23, PRT-8:PRT-4='PO'"
},
{
"identity": "rim",
"map": "participation[typeCode=PRF]"
}
]
},
{
"id": "Observation.value[x]",
"path": "Observation.value[x]",
"short": "Vital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.",
"definition": "Vital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.",
"comment": "An observation may have; 1) a single value here, 2) both a value and a set of related or component values, or 3) only a set of related or component values. If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the [Notes section](observation.html#notes) below.",
"requirements": "9. SHALL contain exactly one [1..1] value with @xsi:type=\"PQ\" (CONF:7305).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.value[x]",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Quantity"
},
{
"code": "CodeableConcept"
},
{
"code": "string"
},
{
"code": "boolean"
},
{
"code": "integer"
},
{
"code": "Range"
},
{
"code": "Ratio"
},
{
"code": "SampledData"
},
{
"code": "time"
},
{
"code": "dateTime"
},
{
"code": "Period"
}
],
"condition": [
"obs-7"
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "sct-concept",
"map": "< 441742003 |Evaluation finding|"
},
{
"identity": "v2",
"map": "OBX.2, OBX.5, OBX.6"
},
{
"identity": "rim",
"map": "value"
},
{
"identity": "sct-attr",
"map": "363714003 |Interprets|"
}
]
},
{
"id": "Observation.dataAbsentReason",
"path": "Observation.dataAbsentReason",
"short": "Why the result is missing",
"definition": "Provides a reason why the expected value in the element Observation.value[x] is missing.",
"comment": "Null or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be \"detected\", \"not detected\", \"inconclusive\", or \"specimen unsatisfactory\". \n\nThe alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code \"error\" could be used when the measurement was not completed. Note that an observation may only be reported if there are values to report. For example differential cell counts values may be reported only when > 0. Because of these options, use-case agreements are required to interpret general observations for null or exceptional values.",
"requirements": "For many results it is necessary to handle exceptional values in measurements.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.dataAbsentReason",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"condition": [
"obs-6"
],
"mustSupport": true,
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationValueAbsentReason"
}
],
"strength": "extensible",
"description": "Codes specifying why the result (`Observation.value[x]`) is missing.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/data-absent-reason"
},
"mapping": [
{
"identity": "v2",
"map": "N/A"
},
{
"identity": "rim",
"map": "value.nullFlavor"
}
]
},
{
"id": "Observation.interpretation",
"path": "Observation.interpretation",
"short": "High, low, normal, etc.",
"definition": "The assessment made based on the result of the observation. Intended as a simple compact code often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result. Otherwise known as abnormal flag.",
"requirements": "For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.",
"alias": [
"Abnormal Flag"
],
"min": 0,
"max": "1",
"base": {
"path": "Observation.interpretation",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationInterpretation"
}
],
"strength": "extensible",
"description": "Codes identifying interpretations of observations.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-interpretation"
},
"mapping": [
{
"identity": "sct-concept",
"map": "< 260245000 |Findings values|"
},
{
"identity": "v2",
"map": "OBX-8"
},
{
"identity": "rim",
"map": "interpretationCode"
},
{
"identity": "sct-attr",
"map": "363713009 |Has interpretation|"
}
]
},
{
"id": "Observation.comment",
"path": "Observation.comment",
"short": "Comments about result",
"definition": "May include statements about significant, unexpected or unreliable values, or information about the source of the value where this may be relevant to the interpretation of the result.",
"requirements": "Need to be able to provide free text additional information.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.comment",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "NTE.3 (partner NTE to OBX, or sometimes another (child?) OBX)"
},
{
"identity": "rim",
"map": "subjectOf.observationEvent[code=\"annotation\"].value"
}
]
},
{
"id": "Observation.bodySite",
"path": "Observation.bodySite",
"short": "Observed body part",
"definition": "Indicates the site on the subject's body where the observation was made (i.e. the target site).",
"comment": "Only used if not implicit in code found in Observation.code. In many systems, this may be represented as a related observation instead of an inline component. \n\nIf the use case requires BodySite to be handled as a separate resource (e.g. to identify and track separately) then use the standard extension[ body-structure](extension-body-structure.html).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.bodySite",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "BodySite"
}
],
"strength": "example",
"description": "Codes describing anatomical locations. May include laterality.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/body-site"
},
"mapping": [
{
"identity": "sct-concept",
"map": "< 123037004 |Body structure|"
},
{
"identity": "v2",
"map": "OBX-20"
},
{
"identity": "rim",
"map": "targetSiteCode"
},
{
"identity": "sct-attr",
"map": "718497002 |Inherent location|"
}
]
},
{
"id": "Observation.method",
"path": "Observation.method",
"short": "How it was done",
"definition": "Indicates the mechanism used to perform the observation.",
"comment": "Only used if not implicit in code for Observation.code.",
"requirements": "In some cases, method can impact results and is thus used for determining whether results can be compared or determining significance of results.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.method",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationMethod"
}
],
"strength": "example",
"description": "Methods for simple observations.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-methods"
},
"mapping": [
{
"identity": "v2",
"map": "OBX-17"
},
{
"identity": "rim",
"map": "methodCode"
}
]
},
{
"id": "Observation.specimen",
"path": "Observation.specimen",
"short": "Specimen used for this observation",
"definition": "The specimen that was used when this observation was made.",
"comment": "Should only be used if not implicit in code found in `Observation.code`. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.specimen",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Specimen"
]
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "sct-concept",
"map": "< 123038009 |Specimen|"
},
{
"identity": "v2",
"map": "SPM segment"
},
{
"identity": "rim",
"map": "participation[typeCode=SPC].specimen"
},
{
"identity": "sct-attr",
"map": "704319004 |Inherent in|"
}
]
},
{
"id": "Observation.device",
"path": "Observation.device",
"short": "(Measurement) Device",
"definition": "The device used to generate the observation data.",
"comment": "An extension should be used if further typing of the device is needed. Devices used to support obtaining an observation can be represented using an extension or the [Provenance](provenance.html) resource. (e.g., a device gateway such as a smart phone).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.device",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Device",
"http://hl7.org/fhir/StructureDefinition/DeviceComponent",
"http://hl7.org/fhir/StructureDefinition/DeviceMetric"
]
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "sct-concept",
"map": "< 49062001 |Device|"
},
{
"identity": "v2",
"map": "OBX-17 / PRT -10"
},
{
"identity": "rim",
"map": "participation[typeCode=DEV]"
},
{
"identity": "sct-attr",
"map": "424226004 |Using device|"
}
]
},
{
"id": "Observation.referenceRange",
"path": "Observation.referenceRange",
"short": "Provides guide for interpretation",
"definition": "Guidance on how to interpret the value by comparison to a normal or recommended range.",
"comment": "Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.",
"requirements": "Knowing what values are considered \"normal\" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.referenceRange",
"min": 0,
"max": "*"
},
"type": [
{
"code": "BackboneElement"
}
],
"constraint": [
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div",
"source": "Element"
},
{
"key": "obs-3",
"severity": "error",
"human": "Must have at least a low or a high or text",
"expression": "low.exists() or high.exists() or text.exists()",
"xpath": "(exists(f:low) or exists(f:high)or exists(f:text))"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "OBX.7"
},
{
"identity": "rim",
"map": "outboundRelationship[typeCode=REFV]/target[classCode=OBS, moodCode=EVN]"
}
]
},
{
"id": "Observation.referenceRange.id",
"path": "Observation.referenceRange.id",
"representation": [
"xmlAttr"
],
"short": "xml:id (or equivalent in JSON)",
"definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"min": 0,
"max": "1",
"base": {
"path": "Element.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.referenceRange.extension",
"path": "Observation.referenceRange.extension",
"short": "Additional content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "Element.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.referenceRange.modifierExtension",
"path": "Observation.referenceRange.modifierExtension",
"short": "Extensions that cannot be ignored",
"definition": "May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content",
"modifiers"
],
"min": 0,
"max": "*",
"base": {
"path": "BackboneElement.modifierExtension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": true,
"isModifierReason": "modifierExtension is reserved for use where modifier extensions must be used",
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "Observation.referenceRange.low",
"path": "Observation.referenceRange.low",
"short": "Low Range, if relevant",
"definition": "The value of the low bound of the reference range. The low bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the low bound is omitted, it is assumed to be meaningless (e.g. reference range is <=2.3).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.referenceRange.low",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Quantity",
"profile": [
"http://hl7.org/fhir/StructureDefinition/SimpleQuantity"
]
}
],
"condition": [
"obs-3"
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "OBX-7"
},
{
"identity": "rim",
"map": "value:IVL_PQ.low"
}
]
},
{
"id": "Observation.referenceRange.high",
"path": "Observation.referenceRange.high",
"short": "High Range, if relevant",
"definition": "The value of the high bound of the reference range. The high bound of the reference range endpoint is inclusive of the value (e.g. reference range is >=5 - <=9). If the high bound is omitted, it is assumed to be meaningless (e.g. reference range is >= 2.3).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.referenceRange.high",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Quantity",
"profile": [
"http://hl7.org/fhir/StructureDefinition/SimpleQuantity"
]
}
],
"condition": [
"obs-3"
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "OBX-7"
},
{
"identity": "rim",
"map": "value:IVL_PQ.high"
}
]
},
{
"id": "Observation.referenceRange.type",
"path": "Observation.referenceRange.type",
"short": "Reference range qualifier",
"definition": "Codes to indicate the what part of the targeted reference population it applies to. For example, the normal or therapeutic range.",
"comment": "This SHOULD be populated if there is more than one range. If this element is not present then the normal range is assumed.",
"requirements": "Need to be able to say what kind of reference range this is - normal, recommended, therapeutic, etc., - for proper interpretation.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.referenceRange.type",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationRangeMeaning"
}
],
"strength": "extensible",
"description": "Code for the meaning of a reference range.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/referencerange-meaning"
},
"mapping": [
{
"identity": "sct-concept",
"map": "< 260245000 |Findings values| OR \r< 365860008 |General clinical state finding| \rOR \r< 250171008 |Clinical history or observation findings| OR \r< 415229000 |Racial group| OR \r< 365400002 |Finding of puberty stage| OR\r< 443938003 |Procedure carried out on subject|"
},
{
"identity": "v2",
"map": "OBX-10"
},
{
"identity": "rim",
"map": "interpretationCode"
}
]
},
{
"id": "Observation.referenceRange.appliesTo",
"path": "Observation.referenceRange.appliesTo",
"short": "Reference range population",
"definition": "Codes to indicate the target population this reference range applies to. For example, a reference range may be based on the normal population or a particular sex or race.",
"comment": "This SHOULD be populated if there is more than one range. If this element is not present then the normal population is assumed.",
"requirements": "Need to be able to identify the target population for proper interpretation.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.referenceRange.appliesTo",
"min": 0,
"max": "*"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationRangeType"
}
],
"strength": "example",
"description": "Codes identifying the population the reference range applies to.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/referencerange-appliesto"
},
"mapping": [
{
"identity": "sct-concept",
"map": "< 260245000 |Findings values| OR \r< 365860008 |General clinical state finding| \rOR \r< 250171008 |Clinical history or observation findings| OR \r< 415229000 |Racial group| OR \r< 365400002 |Finding of puberty stage| OR\r< 443938003 |Procedure carried out on subject|"
},
{
"identity": "v2",
"map": "OBX-10"
},
{
"identity": "rim",
"map": "interpretationCode"
}
]
},
{
"id": "Observation.referenceRange.age",
"path": "Observation.referenceRange.age",
"short": "Applicable age range, if relevant",
"definition": "The age at which this reference range is applicable. This is a neonatal age (e.g. number of weeks at term) if the meaning says so.",
"requirements": "Some analytes vary greatly over age.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.referenceRange.age",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Range"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "outboundRelationship[typeCode=PRCN].targetObservationCriterion[code=\"age\"].value"
}
]
},
{
"id": "Observation.referenceRange.text",
"path": "Observation.referenceRange.text",
"short": "Text based reference range in an observation",
"definition": "Text based reference range in an observation which may be used when a quantitative range is not appropriate for an observation. An example would be a reference value of \"Negative\" or a list or table of \"normals\".",
"min": 0,
"max": "1",
"base": {
"path": "Observation.referenceRange.text",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "OBX-7"
},
{
"identity": "rim",
"map": "value:ST"
}
]
},
{
"id": "Observation.hasMember",
"path": "Observation.hasMember",
"short": "Used when reporting vital signs panel components",
"definition": "Used when reporting vital signs panel components.",
"comment": "When using this element, an observation will typically have either a value or a set of related resources, although both may be present in some cases. For a discussion on the ways Observations can assembled in groups together, see [Notes](observation.html#obsgrouping) below.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.hasMember",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse",
"http://hl7.org/fhir/StructureDefinition/Sequence",
"http://hl7.org/fhir/StructureDefinition/vitalsigns"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "Relationships established by OBX-4 usage"
},
{
"identity": "rim",
"map": "outBoundRelationship"
}
]
},
{
"id": "Observation.derivedFrom",
"path": "Observation.derivedFrom",
"short": "Related measurements the observation is made from",
"definition": "The target resource that represents a measurement from which this observation value is derived. For example, a calculated anion gap or a fetal measurement based on an ultrasound image.",
"comment": "All the reference choices that are listed in this element can represent clinical observations and other measurements that may be the source for a derived value. The most common reference will be another Observation. For a discussion on the ways Observations can assembled in groups together, see [Notes](observation.html#obsgrouping) below.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.derivedFrom",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/DocumentReference",
"http://hl7.org/fhir/StructureDefinition/ImagingStudy",
"http://hl7.org/fhir/StructureDefinition/Media",
"http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse",
"http://hl7.org/fhir/StructureDefinition/Sequence",
"http://hl7.org/fhir/StructureDefinition/vitalsigns"
]
}
],
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "Relationships established by OBX-4 usage"
},
{
"identity": "rim",
"map": ".targetObservation"
}
]
},
{
"id": "Observation.component",
"path": "Observation.component",
"short": "Used when reporting systolic and diastolic blood pressure.",
"definition": "Used when reporting systolic and diastolic blood pressure.",
"comment": "For a discussion on the ways Observations can be assembled in groups together see [Notes](observation.html#notes) below.",
"requirements": "Component observations share the same attributes in the Observation resource as the primary observation and are always treated a part of a single observation (they are not separable). However, the reference range for the primary observation value is not inherited by the component values and is required when appropriate for each component observation.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.component",
"min": 0,
"max": "*"
},
"type": [
{
"code": "BackboneElement"
}
],
"constraint": [
{
"key": "ele-1",
"severity": "error",
"human": "All FHIR elements must have a @value or children",
"expression": "hasValue() | (children().count() > id.count())",
"xpath": "@value|f:*|h:div",
"source": "Element"
},
{
"key": "vs-3",
"severity": "error",
"human": "If there is no a value a data absent reason must be present",
"expression": "value.exists() or dataAbsentReason.exists()",
"xpath": "f:*[starts-with(local-name(.), 'value')] or f:dataAbsentReason"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"mapping": [
{
"identity": "v2",
"map": "containment by OBX-4?"
},
{
"identity": "rim",
"map": "outBoundRelationship[typeCode=COMP]"
}
]
},
{
"id": "Observation.component.id",
"path": "Observation.component.id",
"representation": [
"xmlAttr"
],
"short": "xml:id (or equivalent in JSON)",
"definition": "Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.",
"min": 0,
"max": "1",
"base": {
"path": "Element.id",
"min": 0,
"max": "1"
},
"type": [
{
"code": "string"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.component.extension",
"path": "Observation.component.extension",
"short": "Additional content defined by implementations",
"definition": "May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content"
],
"min": 0,
"max": "*",
"base": {
"path": "Element.extension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "rim",
"map": "n/a"
}
]
},
{
"id": "Observation.component.modifierExtension",
"path": "Observation.component.modifierExtension",
"short": "Extensions that cannot be ignored",
"definition": "May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.",
"comment": "There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.",
"alias": [
"extensions",
"user content",
"modifiers"
],
"min": 0,
"max": "*",
"base": {
"path": "BackboneElement.modifierExtension",
"min": 0,
"max": "*"
},
"type": [
{
"code": "Extension"
}
],
"isModifier": true,
"isModifierReason": "modifierExtension is reserved for use where modifier extensions must be used",
"isSummary": true,
"mapping": [
{
"identity": "rim",
"map": "N/A"
}
]
},
{
"id": "Observation.component.code",
"path": "Observation.component.code",
"short": "Type of component observation (code / type)",
"definition": "Describes what was observed. Sometimes this is called the observation \"code\".",
"comment": "*All* code-value and component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.",
"requirements": "Knowing what kind of observation is being made is essential to understanding the observation.",
"min": 1,
"max": "1",
"base": {
"path": "Observation.component.code",
"min": 1,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSigns"
}
],
"strength": "extensible",
"description": "This identifies the vital sign result type.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-vitalsignresult"
},
"mapping": [
{
"identity": "w5",
"map": "FiveWs.what[x]"
},
{
"identity": "sct-concept",
"map": "< 363787002 |Observable entity| OR \r< 386053000 |Evaluation procedure|"
},
{
"identity": "v2",
"map": "OBX-3"
},
{
"identity": "rim",
"map": "code"
}
]
},
{
"id": "Observation.component.value[x]",
"path": "Observation.component.value[x]",
"short": "Vital Sign Value recorded with UCUM",
"definition": "Vital Sign Value recorded with UCUM.",
"comment": "Used when observation has a set of component observations. An observation may have both a value (e.g. an Apgar score) and component observations (the observations from which the Apgar score was derived). If a value is present, the datatype for this element should be determined by Observation.code. A CodeableConcept with just a text would be used instead of a string if the field was usually coded, or if the type associated with the Observation.code defines a coded value. For additional guidance, see the [Notes section](observation.html#notes) below.",
"requirements": "9. SHALL contain exactly one [1..1] value with @xsi:type=\"PQ\" (CONF:7305).",
"min": 0,
"max": "1",
"base": {
"path": "Observation.component.value[x]",
"min": 0,
"max": "1"
},
"type": [
{
"code": "Quantity"
},
{
"code": "CodeableConcept"
},
{
"code": "string"
},
{
"code": "boolean"
},
{
"code": "integer"
},
{
"code": "Range"
},
{
"code": "Ratio"
},
{
"code": "SampledData"
},
{
"code": "time"
},
{
"code": "dateTime"
},
{
"code": "Period"
}
],
"mustSupport": true,
"isModifier": false,
"isSummary": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSignsUnits"
}
],
"strength": "required",
"description": "Common UCUM units for recording Vital Signs",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/ucum-vitals-common"
},
"mapping": [
{
"identity": "sct-concept",
"map": "363714003 |Interprets| < 441742003 |Evaluation finding|"
},
{
"identity": "v2",
"map": "OBX.2, OBX.5, OBX.6"
},
{
"identity": "rim",
"map": "value"
},
{
"identity": "sct-attr",
"map": "363714003 |Interprets|"
}
]
},
{
"id": "Observation.component.dataAbsentReason",
"path": "Observation.component.dataAbsentReason",
"short": "Why the component result is missing",
"definition": "Provides a reason why the expected value in the element Observation.component.value[x] is missing.",
"comment": "\"Null\" or exceptional values can be represented two ways in FHIR Observations. One way is to simply include them in the value set and represent the exceptions in the value. For example, measurement values for a serology test could be \"detected\", \"not detected\", \"inconclusive\", or \"test not done\". \n\nThe alternate way is to use the value element for actual observations and use the explicit dataAbsentReason element to record exceptional values. For example, the dataAbsentReason code \"error\" could be used when the measurement was not completed. Because of these options, use-case agreements are required to interpret general observations for exceptional values.",
"requirements": "For many results it is necessary to handle exceptional values in measurements.",
"min": 0,
"max": "1",
"base": {
"path": "Observation.component.dataAbsentReason",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"condition": [
"obs-6"
],
"mustSupport": true,
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationValueAbsentReason"
}
],
"strength": "extensible",
"description": "Codes specifying why the result (`Observation.value[x]`) is missing.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/data-absent-reason"
},
"mapping": [
{
"identity": "v2",
"map": "N/A"
},
{
"identity": "rim",
"map": "value.nullFlavor"
}
]
},
{
"id": "Observation.component.interpretation",
"path": "Observation.component.interpretation",
"short": "High, low, normal, etc.",
"definition": "The assessment made based on the result of the observation. Intended as a simple compact code often placed adjacent to the result value in reports and flow sheets to signal the meaning/normalcy status of the result. Otherwise known as abnormal flag.",
"comment": "The component interpretation applies only to the individual component value. For an overall interpretation all components together use the Observation.interpretation element.",
"requirements": "For some results, particularly numeric results, an interpretation is necessary to fully understand the significance of a result.",
"alias": [
"Abnormal Flag"
],
"min": 0,
"max": "1",
"base": {
"path": "Observation.component.interpretation",
"min": 0,
"max": "1"
},
"type": [
{
"code": "CodeableConcept"
}
],
"isModifier": false,
"isSummary": false,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "ObservationInterpretation"
}
],
"strength": "extensible",
"description": "Codes identifying interpretations of observations.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-interpretation"
},
"mapping": [
{
"identity": "sct-concept",
"map": "< 260245000 |Findings values|"
},
{
"identity": "v2",
"map": "OBX-8"
},
{
"identity": "rim",
"map": "interpretationCode"
},
{
"identity": "sct-attr",
"map": "363713009 |Has interpretation|"
}
]
},
{
"id": "Observation.component.referenceRange",
"path": "Observation.component.referenceRange",
"short": "Provides guide for interpretation of component result",
"definition": "Guidance on how to interpret the value by comparison to a normal or recommended range.",
"comment": "Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.",
"requirements": "Knowing what values are considered \"normal\" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.",
"min": 0,
"max": "*",
"base": {
"path": "Observation.component.referenceRange",
"min": 0,
"max": "*"
},
"contentReference": "#Observation.referenceRange",
"isModifier": false,
"isSummary": false,
"mapping": [
{
"identity": "v2",
"map": "OBX.7"
},
{
"identity": "rim",
"map": "outboundRelationship[typeCode=REFV]/target[classCode=OBS, moodCode=EVN]"
}
]
}
]
},
"differential": {
"element": [
{
"id": "Observation",
"path": "Observation",
"short": "FHIR Vital Signs Profile",
"definition": "The FHIR Vitals Signs profile sets minimum expectations for the Observation Resource to record, search and fetch the vital signs associated with a patient.",
"alias": [
"Vital Signs",
"Measurement",
"Results",
"Tests"
],
"min": 0,
"max": "*",
"constraint": [
{
"key": "vs-2",
"severity": "error",
"human": "If there is no component or hasMember element then either a value[x] or a data absent reason must be present.",
"expression": "(component.empty() and hasMember.empty()) implies (dataAbsentReason or value)",
"xpath": "f:component or f:memberOF or f:*[starts-with(local-name(.), 'value')] or f:dataAbsentReason"
}
]
},
{
"id": "Observation.status",
"path": "Observation.status",
"min": 1,
"max": "1",
"type": [
{
"code": "code"
}
],
"mustSupport": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "Status"
}
],
"strength": "required",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-status"
}
},
{
"id": "Observation.category",
"path": "Observation.category",
"slicing": {
"discriminator": [
{
"type": "value",
"path": "coding.code"
},
{
"type": "value",
"path": "coding.system"
}
],
"ordered": false,
"rules": "open"
},
"min": 1,
"max": "*",
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true
},
{
"id": "Observation.category:vscat",
"path": "Observation.category",
"sliceName": "VSCat",
"min": 1,
"max": "1",
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true
},
{
"id": "Observation.category:vscat.coding",
"path": "Observation.category.coding",
"min": 1,
"max": "*",
"type": [
{
"code": "Coding"
}
],
"mustSupport": true
},
{
"id": "Observation.category:vscat.coding.system",
"path": "Observation.category.coding.system",
"min": 1,
"max": "1",
"type": [
{
"code": "uri"
}
],
"fixedUri": "http://hl7.org/fhir/observation-category",
"mustSupport": true
},
{
"id": "Observation.category:vscat.coding.code",
"path": "Observation.category.coding.code",
"min": 1,
"max": "1",
"type": [
{
"code": "code"
}
],
"fixedCode": "vital-signs",
"mustSupport": true
},
{
"id": "Observation.code",
"path": "Observation.code",
"short": "Coded Responses from C-CDA Vital Sign Results",
"definition": "Coded Responses from C-CDA Vital Sign Results.",
"requirements": "5. SHALL contain exactly one [1..1] code, where the @code SHOULD be selected from ValueSet HITSP Vital Sign Result Type 2.16.840.1.113883.3.88.12.80.62 DYNAMIC (CONF:7301).",
"min": 1,
"max": "1",
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSigns"
}
],
"strength": "extensible",
"description": "This identifies the vital sign result type.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-vitalsignresult"
}
},
{
"id": "Observation.subject",
"path": "Observation.subject",
"min": 1,
"max": "1",
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/Patient"
]
}
],
"mustSupport": true
},
{
"id": "Observation.effective[x]",
"path": "Observation.effective[x]",
"short": "Often just a dateTime for Vital Signs",
"definition": "Often just a dateTime for Vital Signs.",
"min": 1,
"max": "1",
"type": [
{
"code": "dateTime"
},
{
"code": "Period"
}
],
"condition": [
"vs-1"
],
"constraint": [
{
"key": "vs-1",
"severity": "error",
"human": "Datetime must be at least to day.",
"expression": "($this as dateTime).toString().length() >= 8",
"xpath": "f:matches(effectiveDateTime,/\\d{4}-[01]\\d-[0-3]\\dT[0-2]\\d:[0-5]\\d([+-][0-2]\\d:[0-5]\\d|Z)/)"
}
],
"mustSupport": true
},
{
"id": "Observation.value[x]",
"path": "Observation.value[x]",
"short": "Vital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.",
"definition": "Vital Signs value are recorded using the Quantity data type. For supporting observations such as Cuff size could use other datatypes such as CodeableConcept.",
"requirements": "9. SHALL contain exactly one [1..1] value with @xsi:type=\"PQ\" (CONF:7305).",
"min": 0,
"max": "1",
"condition": [
"vs-2"
],
"mustSupport": true
},
{
"id": "Observation.dataAbsentReason",
"path": "Observation.dataAbsentReason",
"min": 0,
"max": "1",
"type": [
{
"code": "CodeableConcept"
}
],
"condition": [
"vs-2"
],
"mustSupport": true
},
{
"id": "Observation.hasMember",
"path": "Observation.hasMember",
"short": "Used when reporting vital signs panel components",
"definition": "Used when reporting vital signs panel components.",
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse",
"http://hl7.org/fhir/StructureDefinition/Sequence",
"http://hl7.org/fhir/StructureDefinition/vitalsigns"
]
}
]
},
{
"id": "Observation.derivedFrom",
"path": "Observation.derivedFrom",
"type": [
{
"code": "Reference",
"targetProfile": [
"http://hl7.org/fhir/StructureDefinition/DocumentReference",
"http://hl7.org/fhir/StructureDefinition/ImagingStudy",
"http://hl7.org/fhir/StructureDefinition/Media",
"http://hl7.org/fhir/StructureDefinition/QuestionnaireResponse",
"http://hl7.org/fhir/StructureDefinition/Sequence",
"http://hl7.org/fhir/StructureDefinition/vitalsigns"
]
}
]
},
{
"id": "Observation.component",
"path": "Observation.component",
"short": "Used when reporting systolic and diastolic blood pressure.",
"definition": "Used when reporting systolic and diastolic blood pressure.",
"constraint": [
{
"key": "vs-3",
"severity": "error",
"human": "If there is no a value a data absent reason must be present",
"expression": "value.exists() or dataAbsentReason.exists()",
"xpath": "f:*[starts-with(local-name(.), 'value')] or f:dataAbsentReason"
}
],
"mustSupport": true
},
{
"id": "Observation.component.code",
"path": "Observation.component.code",
"min": 1,
"max": "1",
"type": [
{
"code": "CodeableConcept"
}
],
"mustSupport": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSigns"
}
],
"strength": "extensible",
"description": "This identifies the vital sign result type.",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/observation-vitalsignresult"
}
},
{
"id": "Observation.component.value[x]",
"path": "Observation.component.value[x]",
"short": "Vital Sign Value recorded with UCUM",
"definition": "Vital Sign Value recorded with UCUM.",
"requirements": "9. SHALL contain exactly one [1..1] value with @xsi:type=\"PQ\" (CONF:7305).",
"min": 0,
"max": "1",
"condition": [
"vs-3"
],
"mustSupport": true,
"binding": {
"extension": [
{
"url": "http://hl7.org/fhir/StructureDefinition/elementdefinition-bindingName",
"valueString": "VitalSignsUnits"
}
],
"strength": "required",
"description": "Common UCUM units for recording Vital Signs",
"valueSetCanonical": "http://hl7.org/fhir/ValueSet/ucum-vitals-common"
}
},
{
"id": "Observation.component.dataAbsentReason",
"path": "Observation.component.dataAbsentReason",
"min": 0,
"max": "1",
"type": [
{
"code": "CodeableConcept"
}
],
"condition": [
"vs-3"
],
"mustSupport": true
}
]
}
}
®© HL7.org 2011+. FHIR Mixed Nomative/Trial Use Ballot (v3.3.0-13671) generated on Tue, Apr 3, 2018 12:16+1000. QA Page
Links: Search |
Version History |
Table of Contents |
Credits |
Compare to DSTU3 |
|
Propose a change