Loinc - FHIR v3.3.0

R4 Ballot #1 (Mixed Normative/Trial use)

This page is part of the FHIR Specification (v3.3.0: R4 Ballot 2). The current version which supercedes this version is 5.0.0. For a full list of available versions, see the Directory of published versions . Page versions: R4B R4 R3 R2

4.2.3 Using LOINC with FHIR

Vocabulary

Work Group

Maturity Level: 5

Ballot Status: Trial Use

4.2.3.1 Summary

Source

LOINC is made available by the Regenstrief Institute

at http://loinc.org

System

The URI http://loinc.org

identifies LOINC codes

Version

Where a version is used, it should be the standard LOINC version e.g. 2.48

Code

The LOINC Code Identifier e.g. 21176-3. LOINC codes are not case sensitive. In addition, LOINC part codes and LOINC answer string ids can be used where appropriate

Display

Use either the SHORTNAME or LONG_COMMON_NAME field for the display

Inactive

codes with Property ACTIVE=DEPRECATED are considered inactive

Subsumption

LOINC defines the Multi-Axial Hierarchy, which is the basis for subsumption logic in LOINC

Filter Properties

Several properties are defined as described below

4.2.3.2 Copyright Issues

The terms of use for LOINC require that a notice be included with any use of LOINC codes. This notice must appear in the copyright element of any value set that includes LOINC codes (either in the code or filter elements, or in an expansion):

<copyright value="This content LOINC® is copyright © 1995 Regenstrief Institute, Inc. and the LOINC Committee, and available at no cost under the license at http://loinc.org/terms-of-use"/>

Additional copyright statements may also be found in the copyright element. Some LOINC codes have 3rd party copyright statements. When these codes are included in a value set, they must carry their own copyright statement as well.

4.2.3.3 Case Sensitivity

For comparison purposes, LOINC codes, displays, and property values are not case sensitive, though implementers SHOULD maintain the correct case when using LOINC codes and property values.

4.2.3.4 Use of LOINC PARTS

As described in the LOINC Manual section 10.2, LOINC Parts are a coded representation of a value for a dimension used to specify a LOINC Term which are assigned a non-semantic identifier with a "LP" prefix and a mod-10 check digit. Following the LOINC license, these part codes may be used in the following ways:

In filter properties, as described below
In Structure Definitions, where the structure describes the use of a set of LOINC codes
In a ConceptMap resource, where mappings between LOINC codes and other codes are being defined

Part codes are the same LOINC system (http://loinc.org) and SHALL be represented in uppercase (e.g. LP31755-9).

4.2.3.5 Use of LOINC Answer Lists

LOINC also allocates Answer List and Answer String Ids for use in various forms and questionnaires. LOINC Answer String IDs are also valid LOINC codes:

  <coding>
    <system value="http://loinc.org"/>
    <code value="LA11165-0"/>
    <display value="Platelet anisocytosis"/>
  </coding>

LOINC Answer List Ids are actually value set identifiers. See below for how to use these.

4.2.3.6 RDF

LOINC uses the namespace http://loinc.org/rdf# as the root for LOINC concepts in the RDF space. This means that when a LOINC code is converted from the system:code pair, where the system is http://loinc.org, to the RDF ontological form, the representation is http://loinc.org/rdf#[code].

4.2.3.7 LOINC Properties

In addition to the standard properties, the following properties are defined for LOINC:

STATUS

boolean

Status of the term. For the purposes of LOINC, codes with Property ACTIVE=DEPRECATED are considered inactive

COMPONENT

code

First major axis-component or analyte: Analyte Name, Analyte sub-class, Challenge

PROPERTY

code

Second major axis-property observed: Kind of Property (also called kind of quantity)

TIME_ASPCT

code

Third major axis-timing of the measurement: Time Aspect (Point or moment in time vs. time interval)

SYSTEM

code

Fourth major axis-type of specimen or system: System (Sample) Type

SCALE_TYP

code

Fifth major axis-scale of measurement: Type of Scale

METHOD_TYP

code

Sixth major axis-method of measurement: Type of Method

CLASS

string

An arbitrary classification of the terms for grouping related observations together

CONSUMER_NAME

string

An experimental (beta) consumer friendly name for this item. The intent is to provide a test name that health care consumers will recognize; it will be similar to the names that might appear on a lab report

CLASSTYPE

string

1=Laboratory class; 2=Clinical class; 3=Claims attachments; 4=Surveys

ORDER_OBS

string

Provides users with an idea of the intended use of the term by categorizing it as an order only, observation only, or both

DOCUMENT_SECTION

string

Classification of whether this LOINC code can be used a full document, a section of a document, or both

Note that when a $lookup operation is performed on a LOINC code, servers SHALL return the version being used (see above) in the version property. Other properties are at the discretion of the server and the client.

4.2.3.8 LOINC Filters

This section documents the property filters that can be used with the LOINC code system in value set composition statements.

4.2.3.8.1 LOINC Property filter

Description

Allows the selection of a set of LOINC codes with a common property value (see list above)

Property Name

One of the names listed in the "Field Name" column in LOINC Database Structure (Appendix A of the LOINC manual)

Operations Allowed

= / regex

Values Allowed

[string value]

Comments

The 6 properties COMPONENT, PROPERTY, TIME_ASPCT, SYSTEM, SCALE_TYP, and METHOD_TYP are most likely to be useful.

4.2.3.8.2 3rd Party Copyright

Description

Allows for the inclusion or exclusion of LOINC codes that include 3rd party copyright notices

Property Name

copyright

Operations Allowed

=

Values Allowed

LOINC | 3rdParty

Comments

LOINC = only codes with a sole copyright by Regenstrief. 3rdParty = only codes with a 3rd party copyright in addition to the one from Regenstrief.

4.2.3.8.3 Multi-Axial Hierarchy

Description

Allows for the selection of a set of codes base on their appearance in the LOINC multi-axial hierarchy

Property Name

parent | ancestor

Operations Allowed

= / in

Values Allowed

Part Code (or, for "in", multiple part codes separated by commas)

Comments

"parent" selects immediate parents only. For example, the code "44022-2" has the parent "LP52960-9". Ancestor includes parents transitively, e.g. "LP52960-9" eventually has a parent "LP31755-9", so the code "44022-2" is in the set of codes that have ancestor=LP31755-9

TODO: Document Ontology

4.2.3.9 Implicit Value Sets

Implicit value sets are those whose specification can be predicted based on the grammar of the underlying code system, and the known structure of the URL that refers to them. LOINC defines one set of implicit value sets: By Multi-Axial Hierarchy Entry.

If any value set resources exist with an identifier that conforms to the URL patterns specified below, the content of the resource must conform to the template provided. Profiles and other value set references are allowed to reference these value sets directly. todo: can LOINC actually host a service that returns these?

The value set identifier http://loinc.org/vs is a value set that contains all LOINC codes.

4.2.3.9.1 LOINC Answer List

LOINC defines a set of Answer lists, each of which contains a set of LOINC codes. LOINC answer lists are value sets. The value set identifier "http://loinc.org/vs/[id]" identifies a value set that contains a set of LOINC codes. For instance, the value set identifier http://loinc.org/vs/LL715-4 has the following definition for LOINC 2.52:

<ValueSet xmlns="http://hl7.org/fhir">
  <text>
    <status value="generated"/>
    <div xmlns="http://www.w3.org/1999/xhtml">
      [some html that identifies that this value set
      includes all LOINC codes in this answer list]
    </div>
  </text>
  <url value="http://loinc.org/vs/LL715-4"/>
  <version value="2.52"/>
  <name value="Platelet morph"/>
  <description value="LOINC Answer List for Platelet morph"/>
  <status value="active"/>
  <date value="[optional date of LOINC release]"/>
  <compose>
    <include>
      <system value="http://loinc.org"/>
      <concept>
        <code value="LA11165-0"/>
        <display value="Platelet anisocytosis"/>
      </concept>
      <concept>
        <code value="LA11168-4"/>
        <display value="Platelet clump"/>
      </concept>
      <concept>
        <code value="LA11167-6"/>
        <display value="Platelet large fragments"/>
      </concept>
      <concept>
        <code value="LA11166-8"/>
        <display value="Platelet satellitism"/>
      </concept>
      <concept>
        <code value="LA11169-2"/>
        <display value="Platelets.agranular"/>
      </concept>
      <concept>
        <code value="LA11170-0"/>
        <display value="Platelets.giant"/>
      </concept>
      <concept>
        <code value="LA11172-6"/>
        <display value="Platelets.large"/>
      </concept>
      <concept>
        <code value="LA11171-8"/>
        <display value="Platelets.small"/>
      </concept>
    </include>
  </compose>
</ValueSet>

Here is an example of a LOINC Answer list used in a Questionnaire question:

<question>
  <concept>
    <system value="http://loinc.org"/>
    <code value="11125-2"/>
    <display value="Plat morph Bld"/>
  </concept>
  <type value="choice"/>
  <options>
    <reference value="http://loinc.org/vs/LL715-4"/>
  </options>
</question>

4.2.3.9.2 Multi-Axial Hierarchy Entry

A value set with an identifier of "http://loinc.org/vs/[partcode]" must conform to this template, where [partcode] is a part code from the multi-axial hierarchy:

<ValueSet xmlns="http://hl7.org/fhir">
  <text>
    <status value="generated"/>
    <div xmlns="http://www.w3.org/1999/xhtml">
      [some html that identifies that this value set
      includes all LOINC codes subsumed by the identified
      Multi-Axial Hierarchy Part Code]
    </div>
  </text>
  <url value="http://loinc.org/vs/[partcode]"/>
  <version value="[optional - but strongly recommended - LOINC version]"/>
  <name value="LOINC Value Set from Multi-Axial Hierarchy code [partcode]"/>
  <description value="All LOINC codes for [partcode or name]"/>
  <status value="active"/>
  <date value="[optional date of LOINC release]"/>
  <compose>
    <include>
      <system value="http://loinc.org"/>
      <filter>
        <property value="ancestor"/>
        <op value="="/>
        <value value="[partcode]"/>
      </filter>
    </include>
  </compose>
</ValueSet>

The appropriate type is determined by mapping from the LOINC specified SCALE_TYP for v3 to FHIR using this table:

SCALE_TYP

FHIR data type

Qn

Quantity

Ord

CodeableConcept

OrdQn

Quantity and CodeableConcept (e.g. both in the data element; either is allowed)

Nom

CodeableConcept (and string?)

Nar

markdown (?)

Multi

Attachment

Doc

Attachment