Consolidated CDA (C-CDA)
3.0.0 - STU3
Consolidated CDA (C-CDA)
3.0.0 - STU3
This page is part of the CCDA: Consolidated CDA Release (v3.0.0: CCDA 3.0) generated with FHIR (HL7® FHIR® Standard) v5.0.0. This is the current published version in its permanent home (it will always be available at this URL). For a full list of available versions, see the Directory of published versions
| Draft as of 2024-05-18 |
Definitions for the HealthConcernAct logical model.
Guidance on how to interpret the contents of this table can be found here
| 0. Act | |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())should-author: SHOULD contain author ( author.exists()) |
| 2. Act.templateId | |
| Control | 1..? |
| Slicing | This element introduces a set of slices on Act.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Act.templateId:health-concern-act | |
| Slice Name | health-concern-act |
| Control | 1..1 |
| 6. Act.templateId:health-concern-act.root | |
| Control | 1..? |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.132 |
| 8. Act.templateId:health-concern-act.extension | |
| Control | 1..? |
| Pattern Value | 2022-06-01 |
| 10. Act.classCode | |
| Comments | SHALL contain exactly one [1..1] @classCode="ACT" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:4515-30750). |
| Fixed Value | ACT |
| 12. Act.moodCode | |
| Comments | SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:4515-30751). |
| Fixed Value | EVN |
| 14. Act.id | |
| Comments | SHALL contain at least one [1..*] id (CONF:4515-30754). |
| Control | 1..? |
| 16. Act.code | |
| Short | Functional status assessment note |
| Comments | SHALL contain exactly one [1..1] code (CONF:4515-32310). |
| 18. Act.code.code | |
| Control | 1..? |
| Pattern Value | 75310-3 |
| 20. Act.code.codeSystem | |
| Short | LOINC |
| Control | 1..? |
| Pattern Value | 2.16.840.1.113883.6.1 |
| 22. Act.text | |
| Short | SHOULD reference the portion of section narrative text corresponding to this entry |
| 24. Act.text.reference | |
| Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#')) |
| 26. Act.statusCode | |
| Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-30758). |
| Control | 1..? |
| 28. Act.statusCode.nullFlavor | |
| Control | 0..0 |
| 30. Act.statusCode.code | |
| Control | 1..? |
| Binding | The codes SHALL be taken from ProblemAct statusCode  (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.19) |
| 32. Act.effectiveTime | |
| Comments | MAY contain zero or one [0..1] effectiveTime (CONF:4515-30759). |
| 34. Act.author | |
| Short | A health concern may be a patient or provider concern. If the author is set to the recordTarget (patient), this is a patient concern. If the author is set to a provider, this is a provider concern. If both patient and provider are set as authors, this is a concern of both the patient and the provider. |
| Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31546). |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
| 36. Act.entryRelationship | |
| Short | When this Health Concern Act is a Social Determinant of Health Health Concern it **SHOULD** contain zero or more [0..*] entryRelationship subentries such that it contains an observation with an observation/value selected from ValueSet [Social Determinant of Health Conditions 2.16.840.1.113762.1.4.1196.788](https://vsac.nlm.nih.gov/valueset/2.16.840.1.113762.1.4.1196.788/expansion) **DYNAMIC** (CONF:4515-32962). |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31549) such that it |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 38. Act.entryRelationship:observations | |
| Slice Name | observations |
| Control | 0..* |
| 40. Act.entryRelationship:observations.typeCode | |
| Fixed Value | REFR |
| 42. Act.entryRelationship:observations.observation | |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Problem Observation, Allergy - Intolerance Observation, Assessment Scale Observation, Self-Care Activities (ADL and IADL), Mental Status Observation, Smoking Status, Functional Status Observation, Nutrition Assessment, Pregnancy Observation, Reaction Observation, Result Observation, Sensory Status, Social History Observation, Substance or Device Allergy - Intolerance Observation, Vital Sign Observation, Longitudinal Care Wound Observation, Problem Observation, Caregiver Characteristics, Cultural and Religious Observation, Characteristics of Home Environment, Nutritional Status Observation, Priority Preference) |
| 44. Act.entryRelationship:acts | |
| Slice Name | acts |
| Control | 0..* |
| 46. Act.entryRelationship:acts.typeCode | |
| Fixed Value | REFR |
| 48. Act.entryRelationship:acts.act | |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Encounter Diagnosis, Hospital Admission Diagnosis, Postprocedure Diagnosis, Preoperative Diagnosis, Entry Reference) |
| 50. Act.entryRelationship:organizers | |
| Slice Name | organizers |
| Control | 0..* |
| 52. Act.entryRelationship:organizers.typeCode | |
| Fixed Value | REFR |
| 54. Act.entryRelationship:organizers.organizer | |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer(Family History Organizer, Result Organizer) |
| 56. Act.entryRelationship:related-entries | |
| Slice Name | related-entries |
| Short | Where a Health Concern needs to reference another entry already described in the CDA document instance, rather than repeating the full content of the entry, the Entry Reference template may be used to reference this entry. This may also be used to refer to other Health Concern Acts where there is a general relationship between the source and the target (Health Concern REFERS TO Health Concern). For example, a patient has 2 health concerns identified in a CARE Plan: Failure to Thrive and Poor Feeding; while it could be that one may have caused the other, at the time of care planning and documentation it is not necessary, nor desirable to have to assert what caused what. The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31157) such that it |
| Control | 0..* |
| 58. Act.entryRelationship:related-entries.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31158). |
| Fixed Value | REFR |
| 60. Act.entryRelationship:related-entries.act | |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32106). |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| 62. Act.entryRelationship:component-health-concern-acts | |
| Slice Name | component-health-concern-acts |
| Short | The following entryRelationship represents the relationship between two Health Concern Acts where the target is a component of the source (Health Concern HAS COMPONENT Health Concern). For example, a patient has an Impaired Mobility Health Concern. There may then be the need to document several component health concerns, such as "Unable to Transfer Bed to Chair","Unable to Rise from Commode", "Short of Breath Walking with Walker". The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31160) such that it |
| Control | 0..* |
| Invariants | 4515-32745: The Entry Reference template **SHALL** contain an id that references a Health Concern Act (CONF:4515-32745). (%resource.descendants().ofType(CDA.Act).where(templateId.exists($this.root = '2.16.840.1.113883.10.20.22.4.132' and $this.extension = '2022-06-01') and id.exists($this.root = %context.act.id.first().root and $this.extension ~ %context.act.id.first().extension))) |
| 64. Act.entryRelationship:component-health-concern-acts.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31161). |
| Fixed Value | COMP |
| 66. Act.entryRelationship:component-health-concern-acts.act | |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32107). |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| 68. Act.reference | |
| Short | Where it is necessary to reference an external clinical document such as a Referral document, Discharge Summary document etc., the External Document Reference template can be used to reference this document. However, if this Care Plan document is replacing or appending another Care Plan document in the same set, that relationship is set in the header, using ClinicalDocument/relatedDocument. |
| Comments | MAY contain zero or more [0..*] reference (CONF:4515-32757). |
| 70. Act.reference.typeCode | |
| Comments | The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32758). |
| Fixed Value | REFR |
| 72. Act.reference.externalDocument | |
| Comments | The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:4515-32759). |
| Control | 1..? |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalDocument(External Document Reference) |
Guidance on how to interpret the contents of this table can be found here
| 0. Act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. Base definition for all types defined in FHIR type system. |
| Short | Base for all types and resources |
| Control | 10..1* |
| Is Modifier | false |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())should-author: SHOULD contain author ( author.exists()) |
| 2. Act.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Act.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Act.templateId:health-concern-act | |
| Slice Name | health-concern-act |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 6. Act.templateId:health-concern-act.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.132 |
| 8. Act.templateId:health-concern-act.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| Pattern Value | 2022-06-01 |
| 10. Act.classCode | |
| Comments | SHALL contain exactly one [1..1] @classCode="ACT" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:4515-30750). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XActClassDocumentEntryAct (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xActClassDocumentEntryAct|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | ACT |
| 12. Act.moodCode | |
| Comments | SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:4515-30751). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XDocumentActMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentActMood|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | EVN |
| 14. Act.id | |
| Comments | SHALL contain at least one [1..*] id (CONF:4515-30754). |
| Control | 1..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 16. Act.code | |
| Short | Functional status assessment note |
| Comments | SHALL contain exactly one [1..1] code (CONF:4515-32310). |
| Control | 1..1 |
| Binding | For example codes, see v3 Code System ActCode (example to http://terminology.hl7.org/ValueSet/v3-ActCode) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| 18. Act.code.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code |
| Pattern Value | 75310-3 |
| 20. Act.code.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Short | LOINC |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System |
| Pattern Value | 2.16.840.1.113883.6.1 |
| 22. Act.text | |
| Short | SHOULD reference the portion of section narrative text corresponding to this entry |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| 24. Act.text.reference | |
| Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
| Label | Reference |
| Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#')) |
| 26. Act.statusCode | |
| Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-30758). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus (required to http://terminology.hl7.org/ValueSet/v3-ActStatus) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 28. Act.statusCode.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..0 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 30. Act.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ProblemAct statusCode (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.19) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code |
| 32. Act.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System |
| 34. Act.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Name |
| 36. Act.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Version |
| 38. Act.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Display Name |
| 40. Act.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| Label | Original Text |
| 42. Act.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
| Label | Qualifier |
| 44. Act.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| XML Format | The type of this property is determined using the " xsi:typeattribute. |
| Label | Translation |
| 46. Act.effectiveTime | |
| Comments | MAY contain zero or one [0..1] effectiveTime (CONF:4515-30759). |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
| 48. Act.author | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | A health concern may be a patient or provider concern. If the author is set to the recordTarget (patient), this is a patient concern. If the author is set to a provider, this is a provider concern. If both patient and provider are set as authors, this is a concern of both the patient and the provider. |
| Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31546). |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
| Is Modifier | false |
| 50. Act.entryRelationship | |
| Short | When this Health Concern Act is a Social Determinant of Health Health Concern it **SHOULD** contain zero or more [0..*] entryRelationship subentries such that it contains an observation with an observation/value selected from ValueSet [Social Determinant of Health Conditions 2.16.840.1.113762.1.4.1196.788](https://vsac.nlm.nih.gov/valueset/2.16.840.1.113762.1.4.1196.788/expansion) **DYNAMIC** (CONF:4515-32962). |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31549) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Act.entryRelationship:observations | |
| Slice Name | observations |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 54. Act.entryRelationship:observations.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 56. Act.entryRelationship:observations.observation | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Problem Observation, Allergy - Intolerance Observation, Assessment Scale Observation, Self-Care Activities (ADL and IADL), Mental Status Observation, Smoking Status, Functional Status Observation, Nutrition Assessment, Pregnancy Observation, Reaction Observation, Result Observation, Sensory Status, Social History Observation, Substance or Device Allergy - Intolerance Observation, Vital Sign Observation, Longitudinal Care Wound Observation, Problem Observation, Caregiver Characteristics, Cultural and Religious Observation, Characteristics of Home Environment, Nutritional Status Observation, Priority Preference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())should-author: SHOULD contain author ( author.exists()) |
| 58. Act.entryRelationship:acts | |
| Slice Name | acts |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 60. Act.entryRelationship:acts.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 62. Act.entryRelationship:acts.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Encounter Diagnosis, Hospital Admission Diagnosis, Postprocedure Diagnosis, Preoperative Diagnosis, Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 64. Act.entryRelationship:organizers | |
| Slice Name | organizers |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 66. Act.entryRelationship:organizers.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 68. Act.entryRelationship:organizers.organizer | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer(Family History Organizer, Result Organizer) |
| Is Modifier | false |
| Invariants | should-sdtctext-ref-value: SHOULD contain text/reference/@value (sdtcText.reference.value.exists()) |
| 70. Act.entryRelationship:related-entries | |
| Slice Name | related-entries |
| Short | Where a Health Concern needs to reference another entry already described in the CDA document instance, rather than repeating the full content of the entry, the Entry Reference template may be used to reference this entry. This may also be used to refer to other Health Concern Acts where there is a general relationship between the source and the target (Health Concern REFERS TO Health Concern). For example, a patient has 2 health concerns identified in a CARE Plan: Failure to Thrive and Poor Feeding; while it could be that one may have caused the other, at the time of care planning and documentation it is not necessary, nor desirable to have to assert what caused what. The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31157) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 72. Act.entryRelationship:related-entries.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31158). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 74. Act.entryRelationship:related-entries.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32106). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 76. Act.entryRelationship:component-health-concern-acts | |
| Slice Name | component-health-concern-acts |
| Short | The following entryRelationship represents the relationship between two Health Concern Acts where the target is a component of the source (Health Concern HAS COMPONENT Health Concern). For example, a patient has an Impaired Mobility Health Concern. There may then be the need to document several component health concerns, such as "Unable to Transfer Bed to Chair","Unable to Rise from Commode", "Short of Breath Walking with Walker". The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31160) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| Invariants | 4515-32745: The Entry Reference template **SHALL** contain an id that references a Health Concern Act (CONF:4515-32745). (%resource.descendants().ofType(CDA.Act).where(templateId.exists($this.root = '2.16.840.1.113883.10.20.22.4.132' and $this.extension = '2022-06-01') and id.exists($this.root = %context.act.id.first().root and $this.extension ~ %context.act.id.first().extension))) |
| 78. Act.entryRelationship:component-health-concern-acts.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31161). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | COMP |
| 80. Act.entryRelationship:component-health-concern-acts.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32107). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 82. Act.reference | |
| Short | Where it is necessary to reference an external clinical document such as a Referral document, Discharge Summary document etc., the External Document Reference template can be used to reference this document. However, if this Care Plan document is replacing or appending another Care Plan document in the same set, that relationship is set in the header, using ClinicalDocument/relatedDocument. |
| Comments | MAY contain zero or more [0..*] reference (CONF:4515-32757). |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
| 84. Act.reference.typeCode | |
| Comments | The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32758). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipExternalReference (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipExternalReference) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 86. Act.reference.externalDocument | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:4515-32759). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalDocument(External Document Reference) |
| Is Modifier | false |
| Invariants | should-setId: SHOULD contain setId (setId.exists())should-versionNumber: SHOULD contain versionNumber ( versionNumber.exists()) |
Guidance on how to interpret the contents of this table can be found here
| 0. Act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Is Modifier | false |
| Logical Container | ClinicalDocument (CDA Class) |
| Validation | Instance of this type are validated by templateId |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:v3. |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())should-author: SHOULD contain author ( author.exists()) |
| 2. Act.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 4. Act.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 6. Act.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 8. Act.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 10. Act.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 12. Act.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 14. Act.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 16. Act.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 18. Act.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| Slicing | This element introduces a set of slices on Act.templateId. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 20. Act.templateId:health-concern-act | |
| Slice Name | health-concern-act |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 22. Act.templateId:health-concern-act.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 24. Act.templateId:health-concern-act.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 26. Act.templateId:health-concern-act.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 28. Act.templateId:health-concern-act.root | |
| Definition | A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier. |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Pattern Value | 2.16.840.1.113883.10.20.22.4.132 |
| 30. Act.templateId:health-concern-act.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| Pattern Value | 2022-06-01 |
| 32. Act.classCode | |
| Comments | SHALL contain exactly one [1..1] @classCode="ACT" (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6) (CONF:4515-30750). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XActClassDocumentEntryAct (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xActClassDocumentEntryAct|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | ACT |
| 34. Act.moodCode | |
| Comments | SHALL contain exactly one [1..1] @moodCode="EVN" (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001) (CONF:4515-30751). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from XDocumentActMood (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-xDocumentActMood|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | EVN |
| 36. Act.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 38. Act.id | |
| Comments | SHALL contain at least one [1..*] id (CONF:4515-30754). |
| Control | 1..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 40. Act.code | |
| Short | Functional status assessment note |
| Comments | SHALL contain exactly one [1..1] code (CONF:4515-32310). |
| Control | 1..1 |
| Binding | For example codes, see v3 Code System ActCode (example to http://terminology.hl7.org/ValueSet/v3-ActCode) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| 42. Act.code.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 44. Act.code.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code |
| Pattern Value | 75310-3 |
| 46. Act.code.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Short | LOINC |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System |
| Pattern Value | 2.16.840.1.113883.6.1 |
| 48. Act.code.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Name |
| 50. Act.code.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Version |
| 52. Act.code.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Display Name |
| 54. Act.code.sdtcValueSet | |
| Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string(oid: ISO Object Identifier) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet. |
| 56. Act.code.sdtcValueSetVersion | |
| Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion. |
| 58. Act.code.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| Label | Original Text |
| 60. Act.code.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
| Label | Qualifier |
| 62. Act.code.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| XML Format | The type of this property is determined using the " xsi:typeattribute. |
| Label | Translation |
| 64. Act.text | |
| Short | SHOULD reference the portion of section narrative text corresponding to this entry |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| 66. Act.text.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 68. Act.text.compression | |
| Definition | Indicates whether the raw byte data is compressed, and what compression algorithm was used. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDACompressionAlgorithm (required to http://hl7.org/cda/stds/core/ValueSet/CDACompressionAlgorithm) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Compression |
| 70. Act.text.integrityCheck | |
| Definition | The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created. |
| Control | 0..1 |
| Type | base64Binary(bin: Binary Data) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Integrity Check |
| 72. Act.text.integrityCheckAlgorithm | |
| Definition | Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0) (required to http://terminology.hl7.org/ValueSet/v3-IntegrityCheckAlgorithm|2.0.0) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Integrity Check Algorithm |
| 74. Act.text.language | |
| Definition | For character based information the language property specifies the human language of the text. |
| Control | 0..1 |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Language |
| 76. Act.text.mediaType | |
| Definition | Identifies the type of the encapsulated data and identifies a method to interpret or render the data. |
| Control | 0..1 |
| Binding | For example codes, see MediaType (example to http://terminology.hl7.org/ValueSet/v3-MediaType) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Media Type |
| 78. Act.text.representation | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDABinaryDataEncoding (required to http://hl7.org/cda/stds/core/ValueSet/BinaryDataEncoding) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 80. Act.text.xmlText | |
| Definition | Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.) |
| Short | Allows for mixed text content. If @representation='B64', this SHALL be a base64binary string. |
| Comments | This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as unadorned text. |
| 82. Act.text.reference | |
| Definition | A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/TEL |
| Label | Reference |
| Invariants | value-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#')) |
| 84. Act.text.thumbnail | |
| Definition | An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| Label | Thumbnail |
| 86. Act.statusCode | |
| Comments | SHALL contain exactly one [1..1] statusCode (CONF:4515-30758). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ActStatus (required to http://terminology.hl7.org/ValueSet/v3-ActStatus) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 88. Act.statusCode.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..0 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 90. Act.statusCode.code | |
| Definition | The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache. |
| Control | 1..1 |
| Binding | The codes SHALL be taken from ProblemAct statusCode (required to http://cts.nlm.nih.gov/fhir/ValueSet/2.16.840.1.113883.11.20.9.19) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code |
| 92. Act.statusCode.codeSystem | |
| Definition | Specifies the code system that defines the code. |
| Control | 0..0 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System |
| 94. Act.statusCode.codeSystemName | |
| Definition | The common name of the coding system. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Name |
| 96. Act.statusCode.codeSystemVersion | |
| Definition | If applicable, a version descriptor defined specifically for the given code system. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Code System Version |
| 98. Act.statusCode.displayName | |
| Definition | A name or title for the code, under which the sending system shows the code value to its users. |
| Control | 0..0 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Display Name |
| 100. Act.statusCode.sdtcValueSet | |
| Definition | The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string(oid: ISO Object Identifier) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet. |
| 102. Act.statusCode.sdtcValueSetVersion | |
| Definition | The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion. |
| 104. Act.statusCode.originalText | |
| Definition | The text or phrase used as the basis for the coding. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ED |
| Label | Original Text |
| 106. Act.statusCode.qualifier | |
| Definition | Specifies additional codes that increase the specificity of the the primary code. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CR |
| Label | Qualifier |
| 108. Act.statusCode.translation | |
| Definition | A set of other concept descriptors that translate this concept descriptor into other code systems. |
| Control | 0..0 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CD |
| XML Format | The type of this property is determined using the " xsi:typeattribute. |
| Label | Translation |
| 110. Act.effectiveTime | |
| Comments | MAY contain zero or one [0..1] effectiveTime (CONF:4515-30759). |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS |
| 112. Act.priorityCode | |
| Control | 0..1 |
| Binding | For example codes, see ActPriority (example to http://terminology.hl7.org/ValueSet/v3-ActPriority) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CE |
| 114. Act.languageCode | |
| Control | 0..1 |
| Binding | The codes SHALL be taken from AllLanguages (required to http://hl7.org/fhir/ValueSet/all-languages) |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 116. Act.subject | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Subject |
| 118. Act.specimen | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Specimen |
| 120. Act.performer | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Performer2 |
| 122. Act.author | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | A health concern may be a patient or provider concern. If the author is set to the recordTarget (patient), this is a patient concern. If the author is set to a provider, this is a provider concern. If both patient and provider are set as authors, this is a concern of both the patient and the provider. |
| Comments | SHOULD contain zero or more [0..*] Author Participation (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.119) (CONF:4515-31546). |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Author(Author Participation) |
| Is Modifier | false |
| 124. Act.informant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Informant |
| 126. Act.participant | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Participant2 |
| 128. Act.entryRelationship | |
| Short | When this Health Concern Act is a Social Determinant of Health Health Concern it **SHOULD** contain zero or more [0..*] entryRelationship subentries such that it contains an observation with an observation/value selected from ValueSet [Social Determinant of Health Conditions 2.16.840.1.113762.1.4.1196.788](https://vsac.nlm.nih.gov/valueset/2.16.840.1.113762.1.4.1196.788/expansion) **DYNAMIC** (CONF:4515-32962). |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31549) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| Slicing | This element introduces a set of slices on Act.entryRelationship. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 130. Act.entryRelationship:observations | |
| Slice Name | observations |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 132. Act.entryRelationship:observations.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 134. Act.entryRelationship:observations.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 136. Act.entryRelationship:observations.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 138. Act.entryRelationship:observations.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 140. Act.entryRelationship:observations.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 142. Act.entryRelationship:observations.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 144. Act.entryRelationship:observations.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 146. Act.entryRelationship:observations.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 148. Act.entryRelationship:observations.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 150. Act.entryRelationship:observations.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 152. Act.entryRelationship:observations.inversionInd | |
| Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 154. Act.entryRelationship:observations.contextConductionInd | |
| Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 156. Act.entryRelationship:observations.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 158. Act.entryRelationship:observations.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| 160. Act.entryRelationship:observations.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 162. Act.entryRelationship:observations.act | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
| 164. Act.entryRelationship:observations.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
| 166. Act.entryRelationship:observations.observation | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation(Problem Observation, Allergy - Intolerance Observation, Assessment Scale Observation, Self-Care Activities (ADL and IADL), Mental Status Observation, Smoking Status, Functional Status Observation, Nutrition Assessment, Pregnancy Observation, Reaction Observation, Result Observation, Sensory Status, Social History Observation, Substance or Device Allergy - Intolerance Observation, Vital Sign Observation, Longitudinal Care Wound Observation, Problem Observation, Caregiver Characteristics, Cultural and Religious Observation, Characteristics of Home Environment, Nutritional Status Observation, Priority Preference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())should-author: SHOULD contain author ( author.exists()) |
| 168. Act.entryRelationship:observations.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
| 170. Act.entryRelationship:observations.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
| 172. Act.entryRelationship:observations.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
| 174. Act.entryRelationship:observations.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
| 176. Act.entryRelationship:observations.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
| 178. Act.entryRelationship:observations.supply | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
| 180. Act.entryRelationship:acts | |
| Slice Name | acts |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 182. Act.entryRelationship:acts.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 184. Act.entryRelationship:acts.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 186. Act.entryRelationship:acts.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 188. Act.entryRelationship:acts.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 190. Act.entryRelationship:acts.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 192. Act.entryRelationship:acts.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 194. Act.entryRelationship:acts.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 196. Act.entryRelationship:acts.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 198. Act.entryRelationship:acts.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 200. Act.entryRelationship:acts.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 202. Act.entryRelationship:acts.inversionInd | |
| Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 204. Act.entryRelationship:acts.contextConductionInd | |
| Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 206. Act.entryRelationship:acts.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 208. Act.entryRelationship:acts.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| 210. Act.entryRelationship:acts.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 212. Act.entryRelationship:acts.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Encounter Diagnosis, Hospital Admission Diagnosis, Postprocedure Diagnosis, Preoperative Diagnosis, Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 214. Act.entryRelationship:acts.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
| 216. Act.entryRelationship:acts.observation | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
| 218. Act.entryRelationship:acts.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
| 220. Act.entryRelationship:acts.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
| 222. Act.entryRelationship:acts.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
| 224. Act.entryRelationship:acts.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
| 226. Act.entryRelationship:acts.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
| 228. Act.entryRelationship:acts.supply | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
| 230. Act.entryRelationship:organizers | |
| Slice Name | organizers |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 232. Act.entryRelationship:organizers.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 234. Act.entryRelationship:organizers.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 236. Act.entryRelationship:organizers.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 238. Act.entryRelationship:organizers.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 240. Act.entryRelationship:organizers.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 242. Act.entryRelationship:organizers.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 244. Act.entryRelationship:organizers.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 246. Act.entryRelationship:organizers.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 248. Act.entryRelationship:organizers.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 250. Act.entryRelationship:organizers.typeCode | |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 252. Act.entryRelationship:organizers.inversionInd | |
| Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 254. Act.entryRelationship:organizers.contextConductionInd | |
| Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 256. Act.entryRelationship:organizers.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 258. Act.entryRelationship:organizers.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| 260. Act.entryRelationship:organizers.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 262. Act.entryRelationship:organizers.act | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act |
| 264. Act.entryRelationship:organizers.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
| 266. Act.entryRelationship:organizers.observation | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
| 268. Act.entryRelationship:organizers.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
| 270. Act.entryRelationship:organizers.organizer | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer(Family History Organizer, Result Organizer) |
| Is Modifier | false |
| Invariants | should-sdtctext-ref-value: SHOULD contain text/reference/@value (sdtcText.reference.value.exists()) |
| 272. Act.entryRelationship:organizers.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
| 274. Act.entryRelationship:organizers.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
| 276. Act.entryRelationship:organizers.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
| 278. Act.entryRelationship:organizers.supply | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
| 280. Act.entryRelationship:related-entries | |
| Slice Name | related-entries |
| Short | Where a Health Concern needs to reference another entry already described in the CDA document instance, rather than repeating the full content of the entry, the Entry Reference template may be used to reference this entry. This may also be used to refer to other Health Concern Acts where there is a general relationship between the source and the target (Health Concern REFERS TO Health Concern). For example, a patient has 2 health concerns identified in a CARE Plan: Failure to Thrive and Poor Feeding; while it could be that one may have caused the other, at the time of care planning and documentation it is not necessary, nor desirable to have to assert what caused what. The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31157) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| 282. Act.entryRelationship:related-entries.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 284. Act.entryRelationship:related-entries.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 286. Act.entryRelationship:related-entries.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 288. Act.entryRelationship:related-entries.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 290. Act.entryRelationship:related-entries.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 292. Act.entryRelationship:related-entries.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 294. Act.entryRelationship:related-entries.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 296. Act.entryRelationship:related-entries.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 298. Act.entryRelationship:related-entries.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 300. Act.entryRelationship:related-entries.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31158). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 302. Act.entryRelationship:related-entries.inversionInd | |
| Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 304. Act.entryRelationship:related-entries.contextConductionInd | |
| Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 306. Act.entryRelationship:related-entries.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 308. Act.entryRelationship:related-entries.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| 310. Act.entryRelationship:related-entries.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 312. Act.entryRelationship:related-entries.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32106). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 314. Act.entryRelationship:related-entries.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
| 316. Act.entryRelationship:related-entries.observation | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
| 318. Act.entryRelationship:related-entries.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
| 320. Act.entryRelationship:related-entries.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
| 322. Act.entryRelationship:related-entries.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
| 324. Act.entryRelationship:related-entries.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
| 326. Act.entryRelationship:related-entries.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
| 328. Act.entryRelationship:related-entries.supply | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
| 330. Act.entryRelationship:component-health-concern-acts | |
| Slice Name | component-health-concern-acts |
| Short | The following entryRelationship represents the relationship between two Health Concern Acts where the target is a component of the source (Health Concern HAS COMPONENT Health Concern). For example, a patient has an Impaired Mobility Health Concern. There may then be the need to document several component health concerns, such as "Unable to Transfer Bed to Chair","Unable to Rise from Commode", "Short of Breath Walking with Walker". The Entry Reference template is used here because the target Health Concern Act will be defined elsewhere in the Health Concerns Section and thus a reference to that template is all that is required. |
| Comments | MAY contain zero or more [0..*] entryRelationship (CONF:4515-31160) such that it |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship |
| Invariants | 4515-32745: The Entry Reference template **SHALL** contain an id that references a Health Concern Act (CONF:4515-32745). (%resource.descendants().ofType(CDA.Act).where(templateId.exists($this.root = '2.16.840.1.113883.10.20.22.4.132' and $this.extension = '2022-06-01') and id.exists($this.root = %context.act.id.first().root and $this.extension ~ %context.act.id.first().extension))) |
| 332. Act.entryRelationship:component-health-concern-acts.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 334. Act.entryRelationship:component-health-concern-acts.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 336. Act.entryRelationship:component-health-concern-acts.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 338. Act.entryRelationship:component-health-concern-acts.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 340. Act.entryRelationship:component-health-concern-acts.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 342. Act.entryRelationship:component-health-concern-acts.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 344. Act.entryRelationship:component-health-concern-acts.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 346. Act.entryRelationship:component-health-concern-acts.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 348. Act.entryRelationship:component-health-concern-acts.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 350. Act.entryRelationship:component-health-concern-acts.typeCode | |
| Comments | SHALL contain exactly one [1..1] @typeCode="COMP" Has component (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-31161). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipEntryRelationship (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipEntryRelationship) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | COMP |
| 352. Act.entryRelationship:component-health-concern-acts.inversionInd | |
| Definition | The entryRelationship.inversionInd can be set to "true" to indicate that the relationship should be interpreted as if the roles of the source and target entries were reversed. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 354. Act.entryRelationship:component-health-concern-acts.contextConductionInd | |
| Definition | The entryRelationship.contextConductionInd differs from the otherwise common use of this attribute in that in all other cases where this attribute is used, the value is fixed at "true", whereas here the value is defaulted to "true", and can be changed to "false" when referencing an entry in the same document. Setting the context conduction to false when referencing an entry in the same document keeps clear the fact that the referenced object retains its original context. |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Default Value | true |
| 356. Act.entryRelationship:component-health-concern-acts.negationInd | |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 358. Act.entryRelationship:component-health-concern-acts.sequenceNumber | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/INT |
| 360. Act.entryRelationship:component-health-concern-acts.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 362. Act.entryRelationship:component-health-concern-acts.act | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | SHALL contain exactly one [1..1] Entry Reference (identifier: urn:oid:2.16.840.1.113883.10.20.22.4.122) (CONF:4515-32107). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Act(Entry Reference) |
| Is Modifier | false |
| Invariants | should-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists()) |
| 364. Act.entryRelationship:component-health-concern-acts.encounter | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Encounter |
| 366. Act.entryRelationship:component-health-concern-acts.observation | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Observation |
| 368. Act.entryRelationship:component-health-concern-acts.observationMedia | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ObservationMedia |
| 370. Act.entryRelationship:component-health-concern-acts.organizer | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Organizer |
| 372. Act.entryRelationship:component-health-concern-acts.procedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Procedure |
| 374. Act.entryRelationship:component-health-concern-acts.regionOfInterest | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/RegionOfInterest |
| 376. Act.entryRelationship:component-health-concern-acts.substanceAdministration | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/SubstanceAdministration |
| 378. Act.entryRelationship:component-health-concern-acts.supply | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Supply |
| 380. Act.reference | |
| Short | Where it is necessary to reference an external clinical document such as a Referral document, Discharge Summary document etc., the External Document Reference template can be used to reference this document. However, if this Care Plan document is replacing or appending another Care Plan document in the same set, that relationship is set in the header, using ClinicalDocument/relatedDocument. |
| Comments | MAY contain zero or more [0..*] reference (CONF:4515-32757). |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Reference |
| 382. Act.reference.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 384. Act.reference.realmCode | |
| Definition | When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/CS |
| 386. Act.reference.typeId | |
| Definition | When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question. |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 388. Act.reference.typeId.nullFlavor | |
| Definition | If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing. |
| Control | 0..1 |
| Binding | The codes SHALL be taken from CDANullFlavor (required to http://hl7.org/cda/stds/core/ValueSet/CDANullFlavor) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Exceptional Value Detail |
| 390. Act.reference.typeId.assigningAuthorityName | |
| Definition | A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form. |
| Control | 0..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Assigning Authority Name |
| 392. Act.reference.typeId.displayable | |
| Definition | Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false). |
| Control | 0..1 |
| Type | boolean(bl: Boolean) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Displayable |
| 394. Act.reference.typeId.root | |
| Definition | Identifies the type as an HL7 Registered model |
| Control | 1..1 |
| Type | string(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Root |
| Fixed Value | 2.16.840.1.113883.1.3 |
| 396. Act.reference.typeId.extension | |
| Definition | A character string as a unique identifier within the scope of the identifier root. |
| Control | 1..1 |
| Type | string(st: Character String) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Label | Extension |
| 398. Act.reference.templateId | |
| Definition | When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/II |
| 400. Act.reference.typeCode | |
| Comments | The reference, if present, SHALL contain exactly one [1..1] @typeCode="REFR" Refers to (CodeSystem: HL7ActRelationshipType urn:oid:2.16.840.1.113883.5.1002) (CONF:4515-32758). |
| Control | 1..1 |
| Binding | The codes SHALL be taken from x_ActRelationshipExternalReference (required to http://terminology.hl7.org/ValueSet/v3-xActRelationshipExternalReference) |
| Type | code(cs: Coded Simple Value) |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | REFR |
| 402. Act.reference.seperatableInd | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/BL |
| 404. Act.reference.externalAct | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalAct |
| 406. Act.reference.externalObservation | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalObservation |
| 408. Act.reference.externalProcedure | |
| Control | 0..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalProcedure |
| 410. Act.reference.externalDocument | |
| Definition | Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type. |
| Short | Base for all types and resources |
| Comments | The reference, if present, SHALL contain exactly one [1..1] External Document Reference (identifier: urn:hl7ii:2.16.840.1.113883.10.20.22.4.115:2014-06-09) (CONF:4515-32759). |
| Control | 1..1 |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/ExternalDocument(External Document Reference) |
| Is Modifier | false |
| Invariants | should-setId: SHOULD contain setId (setId.exists())should-versionNumber: SHOULD contain versionNumber ( versionNumber.exists()) |
| 412. Act.precondition | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition |
| 414. Act.sdtcPrecondition2 | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/Precondition2 |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameprecondition2. |
| 416. Act.sdtcInFulfillmentOf1 | |
| Control | 0..* |
| Type | http://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1 |
| XML Format | In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameinFulfillmentOf1. |
IG © 2019+ Health Level Seven. Package hl7.cda.us.ccda#3.0.0 based on FHIR 5.0.0. Generated 2024-05-18
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change