Consolidated CDA
3.0.0-ballot - ballot United States of America flag

This page is part of the CCDA: Consolidated CDA Release (v3.0.0-ballot: CCDA 3.0 Ballot 1) based on FHIR (HL7® FHIR® Standard) v5.0.0. . For a full list of available versions, see the Directory of published versions

Logical Model: EstimatedDateofDelivery - Detailed Descriptions

Draft as of 2023-12-21

Definitions for the EstimatedDateofDelivery logical model.

Guidance on how to interpret the contents of this table can be found here

0. Observation
Logical ContainerClinicalDocument (CDA Class)
ValidationInstances of this type are validated by templateId
XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
2. Observation.typeId
Control0..0
4. Observation.templateId
Control1..?
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
6. Observation.templateId:est-date-delivery
Slice Nameest-date-delivery
Control1..1
8. Observation.templateId:est-date-delivery.root
Control1..?
Pattern Value2.16.840.1.113883.10.20.15.3.1
10. Observation.templateId:est-date-delivery.extension
Control0..0
12. Observation.classCode
Comments

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-444).

Fixed ValueOBS
14. Observation.moodCode
Comments

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-445).

Fixed ValueEVN
16. Observation.code
Comments

SHALL contain exactly one [1..1] code (CONF:81-19139).

18. Observation.code.code
Comments

This code SHALL contain exactly one [1..1] @code="11778-8" Estimated date of delivery (CONF:81-19140).

Control1..?
Pattern Value11778-8
20. Observation.code.codeSystem
Comments

This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.1" (CodeSystem: LOINC urn:oid:2.16.840.1.113883.6.1) (CONF:81-26503).

Control1..?
Pattern Value2.16.840.1.113883.6.1
22. Observation.derivationExpr
Control0..0
24. Observation.text
ShortSHOULD reference the portion of section narrative text corresponding to this entry
26. Observation.text.reference
Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
28. Observation.statusCode
Comments

SHALL contain exactly one [1..1] statusCode (CONF:81-448).

Control1..?
30. Observation.statusCode.code
Comments

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19096).

Control1..?
Fixed Valuecompleted
32. Observation.effectiveTime
Control0..0
34. Observation.priorityCode
Control0..0
36. Observation.repeatNumber
Control0..0
38. Observation.languageCode
Control0..0
40. Observation.value
Comments

SHALL contain exactly one [1..1] value with @xsi:type="TS" (CONF:81-450).

Control1..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/TS, http://hl7.org/cda/stds/core/StructureDefinition/EIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/CO, http://hl7.org/cda/stds/core/StructureDefinition/TEL, http://hl7.org/cda/stds/core/StructureDefinition/EN, http://hl7.org/cda/stds/core/StructureDefinition/BL, http://hl7.org/cda/stds/core/StructureDefinition/AD, http://hl7.org/cda/stds/core/StructureDefinition/PIVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/RTO-PQ-PQ, http://hl7.org/cda/stds/core/StructureDefinition/SXPR-TS, http://hl7.org/cda/stds/core/StructureDefinition/ED, http://hl7.org/cda/stds/core/StructureDefinition/II, http://hl7.org/cda/stds/core/StructureDefinition/ST, http://hl7.org/cda/stds/core/StructureDefinition/CD, http://hl7.org/cda/stds/core/StructureDefinition/PQ, http://hl7.org/cda/stds/core/StructureDefinition/IVL-PQ, http://hl7.org/cda/stds/core/StructureDefinition/CE, http://hl7.org/cda/stds/core/StructureDefinition/MO, http://hl7.org/cda/stds/core/StructureDefinition/IVL-TS, http://hl7.org/cda/stds/core/StructureDefinition/ANY, http://hl7.org/cda/stds/core/StructureDefinition/INT, http://hl7.org/cda/stds/core/StructureDefinition/REAL, http://hl7.org/cda/stds/core/StructureDefinition/CV, http://hl7.org/cda/stds/core/StructureDefinition/SC
42. Observation.interpretationCode
Control0..0
44. Observation.methodCode
Control0..0
46. Observation.targetSiteCode
Control0..0
48. Observation.subject
Control0..0
50. Observation.specimen
Control0..0
52. Observation.performer
Control0..0
54. Observation.informant
Control0..0
56. Observation.participant
Control0..0
58. Observation.entryRelationship
Control0..0
60. Observation.reference
Control0..0
62. Observation.precondition
Control0..0
64. Observation.referenceRange
Control0..0

Guidance on how to interpret the contents of this table can be found here

0. Observation
Definition

Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.


Base definition for all types defined in FHIR type system.

ShortBase for all types and resources
Control10..1*
Is Modifierfalse
Logical ContainerClinicalDocument (CDA Class)
ValidationInstances of this type are validated by templateId
XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
2. Observation.typeId
Definition

When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
6. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
8. Observation.templateId:est-date-delivery
Slice Nameest-date-delivery
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
10. Observation.templateId:est-date-delivery.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelRoot
Pattern Value2.16.840.1.113883.10.20.15.3.1
12. Observation.templateId:est-date-delivery.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExtension
14. Observation.classCode
Comments

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-444).

Control1..1
BindingThe codes SHALL be taken from ActClassObservation (2.0.0)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueOBS
16. Observation.moodCode
Comments

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-445).

Control1..1
BindingThe codes SHALL be taken from XActMoodDocumentObservation (2.0.0)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueEVN
18. Observation.code
Definition

Describes what was observed. Sometimes this is called the observation "name".

ShortType of observation (code / type)
Comments

SHALL contain exactly one [1..1] code (CONF:81-19139).


All code-value and, if present, component.code-component.value pairs need to be taken into account to correctly understand the meaning of the observation.

Control1..1
This element is affected by the following invariants: obs-7
BindingFor example codes, see ObservationTypehttp://hl7.org/fhir/ValueSet/observation-codes
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CDCodeableConcept
Is Modifierfalse
XML FormatThe type of this property is determined using the xsi:typeattribute.
Requirements

Knowing what kind of observation is being made is essential to understanding the observation.

Alternate NamesName
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
20. Observation.code.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Comments

This code SHALL contain exactly one [1..1] @code="11778-8" Estimated date of delivery (CONF:81-19140).

Control1..1
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode
Pattern Value11778-8
22. Observation.code.codeSystem
Definition

Specifies the code system that defines the code.

Comments

This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.1" (CodeSystem: LOINC urn:oid:2.16.840.1.113883.6.1) (CONF:81-26503).

Control1..1
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System
Pattern Value2.16.840.1.113883.6.1
24. Observation.derivationExpr
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ST
26. Observation.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortSHOULD reference the portion of section narrative text corresponding to this entryText summary of the resource, for human interpretation
Comments

Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
This element is affected by the following invariants: dom-6
Typehttp://hl7.org/cda/stds/core/StructureDefinition/EDNarrative
Is Modifierfalse
XML FormatThe type of this property is determined using the xsi:typeattribute.
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Observation.text.reference
Definition

A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.

Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/TEL
LabelReference
Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
30. Observation.statusCode
Comments

SHALL contain exactly one [1..1] statusCode (CONF:81-448).

Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
32. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Comments

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19096).

Control1..1
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode
Fixed Valuecompleted
34. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System
36. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Name
38. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Version
40. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelDisplay Name
42. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
LabelOriginal Text
44. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
LabelQualifier
46. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
XML FormatThe type of this property is determined using the xsi:typeattribute.
LabelTranslation
48. Observation.effectiveTime
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
50. Observation.priorityCode
Control0..0
BindingFor example codes, see ActPriority
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
52. Observation.repeatNumber
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-INT
54. Observation.languageCode
Control0..0
BindingThe codes SHALL be taken from AllLanguages
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
56. Observation.value
Comments

SHALL contain exactly one [1..1] value with @xsi:type="TS" (CONF:81-450).

Control1..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/TS
XML FormatThe type of this property is determined using the xsi:typeattribute.
58. Observation.interpretationCode
Control0..0
BindingThe codes SHALL be taken from ObservationInterpretation
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
60. Observation.methodCode
Control0..0
BindingFor example codes, see ObservationMethod
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
62. Observation.targetSiteCode
Definition

Drawn from concept domain ActSite

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
64. Observation.subject
Definition

The patient, or group of patients, location, device, organization, procedure or practitioner this observation is about and into whose or what record the observation is placed. If the actual focus of the observation is different from the subject (or a sample of, part, or region of the subject), the focus element or the code itself specifies the actual focus of the observation.

ShortWho and/or what the observation is about
Comments

One would expect this element to be a cardinality of 1..1. The only circumstance in which the subject can be missing is when the observation is made by a device that does not know the patient. In this case, the observation SHALL be matched to a patient through some context/channel matching technique, and at this point, the observation should be updated. The subject of an Observation may in some cases be a procedure. This supports the regulatory inspection use case where observations are captured during inspections of a procedure that is being performed (independent of any particular patient or whether patient related at all).

Control0..01
Typehttp://hl7.org/cda/stds/core/StructureDefinition/SubjectReference(Patient, Group, Device, Location, Organization, Procedure, Practitioner, Medication, Substance, BiologicallyDerivedProduct, NutritionProduct)
Is Modifierfalse
Requirements

Observations have no value if you don't know who or what they're about.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Observation.specimen
Definition

The specimen that was used when this observation was made.

ShortSpecimen used for this observation
Comments

Should only be used if not implicit in code found in Observation.code. Observations are not made on specimens themselves; they are made on a subject, but in many cases by the means of a specimen. Note that although specimens are often involved, they are not always tracked and reported explicitly. Also note that observation resources may be used in contexts that track the specimen explicitly (e.g. Diagnostic Report).

Control0..01
Typehttp://hl7.org/cda/stds/core/StructureDefinition/SpecimenReference(Specimen, Group)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
obs-9: If Observation.specimen is a reference to Group, the group can only have specimens ((reference.resolve().exists() and reference.resolve() is Group) implies reference.resolve().member.entity.resolve().all($this is Specimen))
68. Observation.performer
Definition

Who was responsible for asserting the observed value as "true".

ShortWho is responsible for the observation
Control0..0*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Performer2Reference(Practitioner, PractitionerRole, Organization, CareTeam, Patient, RelatedPerson)
Is Modifierfalse
Requirements

May give a degree of confidence in the observation and also indicates where follow-up questions should be directed.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Observation.informant
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Informant
72. Observation.participant
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Participant2
74. Observation.entryRelationship
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
76. Observation.reference
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Reference
78. Observation.precondition
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Precondition
80. Observation.referenceRange
Definition

Relates an Observation to the ObservationRange class, where the expected range of values for a particular observation can be specified.


Guidance on how to interpret the value by comparison to a normal or recommended range. Multiple reference ranges are interpreted as an "OR". In other words, to represent two distinct target populations, two referenceRange elements would be used.

ShortProvides guide for interpretation
Comments

Most observations only have one generic reference range. Systems MAY choose to restrict to only supplying the relevant reference range based on knowledge about the patient (e.g., specific to the patient's age, gender, weight and other factors), but this might not be possible or appropriate. Whenever more than one reference range is supplied, the differences between them SHOULD be provided in the reference range and/or age properties.

Control0..0*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRootBackboneElement
Is Modifierfalse
Requirements

Knowing what values are considered "normal" can help evaluate the significance of a particular result. Need to be able to provide multiple reference ranges for different contexts.

Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
obs-3: Must have at least a low or a high or text (low.exists() or high.exists() or text.exists())

Guidance on how to interpret the contents of this table can be found here

0. Observation
Definition

Defines the basic properties of every data value. This is an abstract type, meaning that no value can be just a data value without belonging to any concrete type. Every concrete type is a specialization of this general abstract DataValue type.

ShortBase for all types and resources
Control1..1
Is Modifierfalse
Logical ContainerClinicalDocument (CDA Class)
ValidationInstances of this type are validated by templateId
XML FormatIn the XML format, this property has the namespace urn:hl7-org:v3.
Invariantsshould-text-ref-value: SHOULD contain text/reference/@value (text.reference.value.exists())
2. Observation.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
4. Observation.realmCode
Definition

When valued in an instance, this attribute signals the imposition of realm-specific constraints. The value of this attribute identifies the realm in question

Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
6. Observation.typeId
Definition

When valued in an instance, this attribute signals the imposition of constraints defined in an HL7-specified message type. This might be a common type (also known as CMET in the messaging communication environment), or content included within a wrapper. The value of this attribute provides a unique identifier for the type in question.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
13. Observation.templateId
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
SlicingThis element introduces a set of slices on Observation.templateId. The slices are unordered and Open, and can be differentiated using the following discriminators:
  • value @ root
15. Observation.templateId:est-date-delivery
Slice Nameest-date-delivery
Definition

When valued in an instance, this attribute signals the imposition of a set of template-defined constraints. The value of this attribute provides a unique identifier for the templates in question

Control1..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
17. Observation.templateId:est-date-delivery.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
19. Observation.templateId:est-date-delivery.assigningAuthorityName
Definition

A human readable name or mnemonic for the assigning authority. The Assigning Authority Name has no computational value. The purpose of a Assigning Authority Name is to assist an unaided human interpreter of an II value to interpret the authority. Note: no automated processing must depend on the assigning authority name to be present in any form.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelAssigning Authority Name
21. Observation.templateId:est-date-delivery.displayable
Definition

Specifies if the identifier is intended for human display and data entry (displayable = true) as opposed to pure machine interoperation (displayable = false).

Control0..1
Typeboolean(bl: Boolean)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelDisplayable
23. Observation.templateId:est-date-delivery.root
Definition

A unique identifier that guarantees the global uniqueness of the instance identifier. The root alone may be the entire instance identifier.

Control1..1
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelRoot
Pattern Value2.16.840.1.113883.10.20.15.3.1
25. Observation.templateId:est-date-delivery.extension
Definition

A character string as a unique identifier within the scope of the identifier root.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExtension
27. Observation.classCode
Comments

SHALL contain exactly one [1..1] @classCode="OBS" Observation (CodeSystem: HL7ActClass urn:oid:2.16.840.1.113883.5.6 STATIC) (CONF:81-444).

Control1..1
BindingThe codes SHALL be taken from ActClassObservation (2.0.0)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueOBS
29. Observation.moodCode
Comments

SHALL contain exactly one [1..1] @moodCode="EVN" Event (CodeSystem: HL7ActMood urn:oid:2.16.840.1.113883.5.1001 STATIC) (CONF:81-445).

Control1..1
BindingThe codes SHALL be taken from XActMoodDocumentObservation (2.0.0)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
Fixed ValueEVN
31. Observation.negationInd
Control0..1
Typeboolean(bl: Boolean)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
33. Observation.id
Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/II
35. Observation.code
Comments

SHALL contain exactly one [1..1] code (CONF:81-19139).

Control1..1
BindingFor example codes, see ObservationType
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
XML FormatThe type of this property is determined using the xsi:typeattribute.
37. Observation.code.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
39. Observation.code.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Comments

This code SHALL contain exactly one [1..1] @code="11778-8" Estimated date of delivery (CONF:81-19140).

Control1..1
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode
Pattern Value11778-8
41. Observation.code.codeSystem
Definition

Specifies the code system that defines the code.

Comments

This code SHALL contain exactly one [1..1] @codeSystem="2.16.840.1.113883.6.1" (CodeSystem: LOINC urn:oid:2.16.840.1.113883.6.1) (CONF:81-26503).

Control1..1
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System
Pattern Value2.16.840.1.113883.6.1
43. Observation.code.codeSystemName
Definition

The common name of the coding system.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Name
45. Observation.code.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Version
47. Observation.code.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelDisplay Name
49. Observation.code.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring(oid: ISO Object Identifier)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
51. Observation.code.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
53. Observation.code.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
LabelOriginal Text
55. Observation.code.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
LabelQualifier
57. Observation.code.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
XML FormatThe type of this property is determined using the xsi:typeattribute.
LabelTranslation
59. Observation.derivationExpr
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ST
61. Observation.text
ShortSHOULD reference the portion of section narrative text corresponding to this entry
Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
XML FormatThe type of this property is determined using the xsi:typeattribute.
63. Observation.text.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
65. Observation.text.compression
Definition

Indicates whether the raw byte data is compressed, and what compression algorithm was used.

Control0..1
BindingThe codes SHALL be taken from CompressionAlgorithm
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCompression
67. Observation.text.integrityCheck
Definition

The integrity check is a short binary value representing a cryptographically strong checksum that is calculated over the binary data. The purpose of this property, when communicated with a reference is for anyone to validate later whether the reference still resolved to the same data that the reference resolved to when the encapsulated data value with reference was created.

Control0..1
Typebase64Binary(bin: Binary Data)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelIntegrity Check
69. Observation.text.integrityCheckAlgorithm
Definition

Specifies the algorithm used to compute the integrityCheck value. The cryptographically strong checksum algorithm Secure Hash Algorithm-1 (SHA-1) is currently the industry standard. It has superseded the MD5 algorithm only a couple of years ago, when certain flaws in the security of MD5 were discovered. Currently the SHA-1 hash algorithm is the default choice for the integrity check algorithm. Note that SHA-256 is also entering widespread usage.

Control0..1
BindingThe codes SHALL be taken from IntegrityCheckAlgorithm (2.0.0)
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelIntegrity Check Algorithm
71. Observation.text.language
Definition

For character based information the language property specifies the human language of the text.

Control0..1
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelLanguage
73. Observation.text.mediaType
Definition

Identifies the type of the encapsulated data and identifies a method to interpret or render the data.

Control0..1
BindingFor example codes, see MediaType
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelMedia Type
75. Observation.text.representation
Control0..1
BindingThe codes SHALL be taken from Binary Data Encoding Value Set
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
77. Observation.text.xmlText
Definition

Data that is primarily intended for human interpretation or for further machine processing is outside the scope of HL7. This includes unformatted or formatted written language, multimedia data, or structured information as defined by a different standard (e.g., XML-signatures.)

ShortAllows for mixed text content. If @representation='B64', this SHALL be a base64binary string.
Comments

This element is represented in XML as textual content. The actual name "xmlText" will not appear in a CDA instance.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as unadorned text.
79. Observation.text.reference
Definition

A telecommunication address (TEL), such as a URL for HTTP or FTP, which will resolve to precisely the same binary data that could as well have been provided as inline data.

Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/TEL
LabelReference
Invariantsvalue-starts-octothorpe: If reference/@value is present, it SHALL begin with a '#' and SHALL point to its corresponding narrative (value.exists() implies value.startsWith('#'))
81. Observation.text.thumbnail
Definition

An abbreviated rendition of the full data. A thumbnail requires significantly fewer resources than the full data, while still maintaining some distinctive similarity with the full data. A thumbnail is typically used with by-reference encapsulated data. It allows a user to select data more efficiently before actually downloading through the reference.

Control0..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
LabelThumbnail
83. Observation.statusCode
Comments

SHALL contain exactly one [1..1] statusCode (CONF:81-448).

Control1..1
BindingThe codes SHALL be taken from ActStatus
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
85. Observation.statusCode.nullFlavor
Definition

If a value is an exceptional value (NULL-value), this specifies in what way and why proper information is missing.

Control0..1
BindingThe codes SHALL be taken from CDANullFlavor
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelExceptional Value Detail
87. Observation.statusCode.code
Definition

The plain code symbol defined by the code system. For example, "784.0" is the code symbol of the ICD-9 code "784.0" for headache.

Comments

This statusCode SHALL contain exactly one [1..1] @code="completed" Completed (CodeSystem: HL7ActStatus urn:oid:2.16.840.1.113883.5.14 STATIC) (CONF:81-19096).

Control1..1
Typecode(cs: Coded Simple Value)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode
Fixed Valuecompleted
89. Observation.statusCode.codeSystem
Definition

Specifies the code system that defines the code.

Control0..0
Typestring(oid: ISO Object Identifier, uuid: DCE Universal Unique Identifier, ruid: HL7 Reserved Identifier Scheme)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System
91. Observation.statusCode.codeSystemName
Definition

The common name of the coding system.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Name
93. Observation.statusCode.codeSystemVersion
Definition

If applicable, a version descriptor defined specifically for the given code system.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelCode System Version
95. Observation.statusCode.displayName
Definition

A name or title for the code, under which the sending system shows the code value to its users.

Control0..0
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.
LabelDisplay Name
97. Observation.statusCode.sdtcValueSet
Definition

The valueSet extension adds an attribute for elements with a CD dataType which indicates the particular value set constraining the coded concept.

Control0..1
Typestring(oid: ISO Object Identifier)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSet.
99. Observation.statusCode.sdtcValueSetVersion
Definition

The valueSetVersion extension adds an attribute for elements with a CD dataType which indicates the version of the particular value set constraining the coded concept.

Control0..1
Typestring(st: Character String)
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
XML FormatIn the XML format, this property is represented as an attribute.In the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual namevalueSetVersion.
101. Observation.statusCode.originalText
Definition

The text or phrase used as the basis for the coding.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/ED
LabelOriginal Text
103. Observation.statusCode.qualifier
Definition

Specifies additional codes that increase the specificity of the the primary code.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CR
LabelQualifier
105. Observation.statusCode.translation
Definition

A set of other concept descriptors that translate this concept descriptor into other code systems.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
XML FormatThe type of this property is determined using the xsi:typeattribute.
LabelTranslation
107. Observation.effectiveTime
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-TS
109. Observation.priorityCode
Control0..0
BindingFor example codes, see ActPriority
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
111. Observation.repeatNumber
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/IVL-INT
113. Observation.languageCode
Control0..0
BindingThe codes SHALL be taken from AllLanguages
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CS
115. Observation.value
Comments

SHALL contain exactly one [1..1] value with @xsi:type="TS" (CONF:81-450).

Control1..1
Typehttp://hl7.org/cda/stds/core/StructureDefinition/TS
XML FormatThe type of this property is determined using the xsi:typeattribute.
117. Observation.interpretationCode
Control0..0
BindingThe codes SHALL be taken from ObservationInterpretation
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
119. Observation.methodCode
Control0..0
BindingFor example codes, see ObservationMethod
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CE
121. Observation.targetSiteCode
Definition

Drawn from concept domain ActSite

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/CD
123. Observation.subject
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Subject
125. Observation.specimen
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Specimen
127. Observation.performer
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Performer2
129. Observation.author
Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Author
131. Observation.informant
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Informant
133. Observation.participant
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Participant2
135. Observation.entryRelationship
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/EntryRelationship
137. Observation.reference
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Reference
139. Observation.precondition
Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Precondition
141. Observation.sdtcPrecondition2
Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/Precondition2
XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameprecondition2.
143. Observation.referenceRange
Definition

Relates an Observation to the ObservationRange class, where the expected range of values for a particular observation can be specified.

Control0..0
Typehttp://hl7.org/cda/stds/core/StructureDefinition/InfrastructureRoot
156. Observation.sdtcInFulfillmentOf1
Control0..*
Typehttp://hl7.org/cda/stds/core/StructureDefinition/InFulfillmentOf1
XML FormatIn the XML format, this property has the namespace urn:hl7-org:sdtc.In the XML format, this property has the actual nameinFulfillmentOf1.