This resource allows for the definition of some activity to be performed, independent of a particular patient, practitioner, or other performance context.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

An Extension

R5: ActivityDefinition.versionAlgorithm[x] (new:Coding, string)

Element ActivityDefinition.versionAlgorithm[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.versionAlgorithm[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.versionAlgorithm[x]: http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

R5: ActivityDefinition.copyrightLabel (new:string)

Element ActivityDefinition.copyrightLabel has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.copyrightLabel has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.copyrightLabel: http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

R5: ActivityDefinition.asNeeded[x] (new:boolean, CodeableConcept)

Element ActivityDefinition.asNeeded[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.asNeeded[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The status of this activity definition. Enables tracking the life-cycle of the content.

Allows filtering of activity definitions that are appropriate for use versus not.

The lifecycle status of an artifact.

Set this to true if the definition is to indicate that a particular activity should NOT be performed. If true, this element should be interpreted to reinforce a negative coding. For example NPO as a code with a doNotPerform of true would still indicate to NOT perform the action.

This element is not intended to be used to communicate a decision support response to cancel an order in progress. That should be done with the "remove" type of a PlanDefinition or RequestGroup.

R5: ActivityDefinition.versionAlgorithm[x] (new:Coding, string)

Element ActivityDefinition.versionAlgorithm[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.versionAlgorithm[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.versionAlgorithm[x]: http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

R5: ActivityDefinition.copyrightLabel (new:string)

Element ActivityDefinition.copyrightLabel has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.copyrightLabel has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.copyrightLabel: http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

R5: ActivityDefinition.asNeeded[x] (new:boolean, CodeableConcept)

Element ActivityDefinition.asNeeded[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.asNeeded[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: ActivityDefinition.subject[x]

Element ActivityDefinition.subject[x] is mapped to FHIR R4B element ActivityDefinition.subject[x] as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element ActivityDefinition.subject[x] with unmapped reference targets: AdministrableProductDefinition, ManufacturedItemDefinition, MedicinalProductDefinition, PackagedProductDefinition, SubstanceDefinition. Source element ActivityDefinition.subject[x] has unmapped reference types. While the target element ActivityDefinition.subject[x] is a choice type and does not allow extensions, the alternate-reference extension can be applied to Reference values within it. Note that the choice of canonical for the subject element was introduced in R4B to support pharmaceutical quality use cases. To ensure as much backwards-compatibility as possible, it is recommended to only use the new canonical type with these use cases.

R5: ActivityDefinition.kind

Element ActivityDefinition.kind is mapped to FHIR R4B element ActivityDefinition.kind as SourceIsBroaderThanTarget. The kind element may only specify Request resource types to facilitate considering user input as part of processing the result of any automated clinical reasoning processes. To support creation of event resources, such as Observations, RiskAssessments, and DetectedIssues, use a Task resource with the focus of the task set to the event resource to be created. Note that the kind of resource to be created may determine what types of extensions are permitted.

R5: ActivityDefinition.location additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Location)) additional types from child elements (concept)

Element ActivityDefinition.location is mapped to FHIR R4B element ActivityDefinition.location as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.location do not cover the following types: CodeableReference. The mappings for ActivityDefinition.location do not cover the following types based on type expansion: concept. May reference a specific clinical location or may just identify a type of location.

R5: ActivityDefinition.participant.typeCanonical (new:canonical(CapabilityStatement))

Element ActivityDefinition.participant.typeCanonical has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.typeCanonical has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: ActivityDefinition.participant.typeReference (new:Reference(CareTeam,Device,DeviceDefinition,Endpoint,Group,HealthcareService,Location,Organization,Patient,Practitioner,PractitionerRole,RelatedPerson))

Element ActivityDefinition.participant.typeReference has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.typeReference has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). When this element is a reference, it SHOULD be a reference to a definitional resource (for example, a location type, rather than a specific location).

R5: ActivityDefinition.participant.function (new:CodeableConcept)

Element ActivityDefinition.participant.function has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.function has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: ActivityDefinition.participant.type

Element ActivityDefinition.participant.type is mapped to FHIR R4B element ActivityDefinition.participant.type as SourceIsBroaderThanTarget.

R5: ActivityDefinition.product[x]

Element ActivityDefinition.product[x] is mapped to FHIR R4B element ActivityDefinition.product[x] as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element ActivityDefinition.product[x] with unmapped reference targets: SubstanceDefinition. Source element ActivityDefinition.product[x] has unmapped reference types. While the target element ActivityDefinition.product[x] is a choice type and does not allow extensions, the alternate-reference extension can be applied to Reference values within it.

R5: ActivityDefinition.specimenRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/SpecimenDefinition)) additional types from child elements (value)

Element ActivityDefinition.specimenRequirement is mapped to FHIR R4B element ActivityDefinition.specimenRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.specimenRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.specimenRequirement do not cover the following types based on type expansion: value.

R5: ActivityDefinition.observationRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/ObservationDefinition)) additional types from child elements (value)

Element ActivityDefinition.observationRequirement is mapped to FHIR R4B element ActivityDefinition.observationRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.observationRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.observationRequirement do not cover the following types based on type expansion: value.

R5: ActivityDefinition.observationResultRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/ObservationDefinition)) additional types from child elements (value)

Element ActivityDefinition.observationResultRequirement is mapped to FHIR R4B element ActivityDefinition.observationResultRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.observationResultRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.observationResultRequirement do not cover the following types based on type expansion: value.

This resource allows for the definition of some activity to be performed, independent of a particular patient, practitioner, or other performance context.

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

The base language in which the resource is written.

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

IETF language tag

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

An Extension

R5: ActivityDefinition.versionAlgorithm[x] (new:Coding, string)

Element ActivityDefinition.versionAlgorithm[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.versionAlgorithm[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.versionAlgorithm[x]: http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

R5: ActivityDefinition.copyrightLabel (new:string)

Element ActivityDefinition.copyrightLabel has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.copyrightLabel has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element ActivityDefinition.copyrightLabel: http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

R5: ActivityDefinition.asNeeded[x] (new:boolean, CodeableConcept)

Element ActivityDefinition.asNeeded[x] has a context of ActivityDefinition based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.asNeeded[x] has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

An absolute URI that is used to identify this activity definition when it is referenced in a specification, model, design or an instance; also called its canonical identifier. This SHOULD be globally unique and SHOULD be a literal address at which at which an authoritative instance of this activity definition is (or will be) published. This URL can be the target of a canonical reference. It SHALL remain the same when the activity definition is stored on different servers.

Can be a urn:uuid: or a urn:oid: but real http: addresses are preferred. Multiple instances may share the same URL if they have a distinct version.

The determination of when to create a new version of a resource (same url, new version) vs. defining a new artifact is up to the author. Considerations for making this decision are found in Technical and Business Versions.

In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.

Allows the activity definition to be referenced by a single globally unique identifier.

A formal identifier that is used to identify this activity definition when it is represented in other formats, or referenced in a specification, model, design or an instance.

Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this activity definition outside of FHIR, where it is not possible to use the logical URI.

Allows externally provided and/or usable business identifiers to be easily associated with the module.

The identifier that is used to identify this version of the activity definition when it is referenced in a specification, model, design or instance. This is an arbitrary value managed by the activity definition author and is not expected to be globally unique. For example, it might be a timestamp (e.g. yyyymmdd) if a managed version is not available. There is also no expectation that versions can be placed in a lexicographical sequence. To provide a version consistent with the Decision Support Service specification, use the format Major.Minor.Revision (e.g. 1.0.0). For more information on versioning knowledge assets, refer to the Decision Support Service specification. Note that a version is required for non-experimental active assets.

There may be different activity definition instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the activity definition with the format [url]|[version].

A natural language name identifying the activity definition. This name should be usable as an identifier for the module by machine processing applications such as code generation.

The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Support human navigation and code generation.

A short, descriptive, user-friendly title for the activity definition.

This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.

An explanatory or alternate title for the activity definition giving additional information about its content.

The status of this activity definition. Enables tracking the life-cycle of the content.

Allows filtering of activity definitions that are appropriate for use versus not.

The lifecycle status of an artifact.

A Boolean value to indicate that this activity definition is authored for testing purposes (or education/evaluation/marketing) and is not intended to be used for genuine usage.

Allows filtering of activity definitions that are appropriate for use versus not.

Enables experimental content to be developed following the same lifecycle that would be used for a production-level activity definition.

A code, group definition, or canonical reference that describes or identifies the intended subject of the activity being defined. Canonical references are allowed to support the definition of protocols for drug and substance quality specifications, and is allowed to reference a MedicinalProductDefinition, SubstanceDefinition, AdministrableProductDefinition, ManufacturedItemDefinition, or PackagedProductDefinition resource.

Note that the choice of canonical for the subject element was introduced in R4B to support pharmaceutical quality use cases. To ensure as much backwards-compatibility as possible, it is recommended to only use the new canonical type with these use cases.

The possible types of subjects for an activity (E.g. Patient, Practitioner, Organization, Location, etc.).

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.subject[x]

Element ActivityDefinition.subject[x] is mapped to FHIR R4B element ActivityDefinition.subject[x] as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element ActivityDefinition.subject[x] with unmapped reference targets: AdministrableProductDefinition, ManufacturedItemDefinition, MedicinalProductDefinition, PackagedProductDefinition, SubstanceDefinition. Source element ActivityDefinition.subject[x] has unmapped reference types. While the target element ActivityDefinition.subject[x] is a choice type and does not allow extensions, the alternate-reference extension can be applied to Reference values within it. Note that the choice of canonical for the subject element was introduced in R4B to support pharmaceutical quality use cases. To ensure as much backwards-compatibility as possible, it is recommended to only use the new canonical type with these use cases.

The date (and optionally time) when the activity definition was published. The date must change when the business version changes and it must change if the status code changes. In addition, it should change when the substantive content of the activity definition changes.

Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the activity definition. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

The name of the organization or individual that published the activity definition.

Usually an organization but may be an individual. The publisher (or steward) of the activity definition is the organization or individual primarily responsible for the maintenance and upkeep of the activity definition. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the activity definition. This item SHOULD be populated unless the information is available from context.

Helps establish the "authority/credibility" of the activity definition. May also allow for contact.

Contact details to assist a user in finding and communicating with the publisher.

May be a web site, an email address, a telephone number, etc.

A free text natural language description of the activity definition from a consumer's perspective.

This description can be used to capture details such as why the activity definition was built, comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the activity definition as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the activity definition is presumed to be the predominant language in the place the activity definition was created).

The content was developed with a focus and intent of supporting the contexts that are listed. These contexts may be general categories (gender, age, ...) or may be references to specific programs (insurance plans, studies, ...) and may be used to assist with indexing and searching for appropriate activity definition instances.

When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.

Assist in searching for appropriate content.

A legal or geographic region in which the activity definition is intended to be used.

It may be possible for the activity definition to be used in jurisdictions other than those for which it was originally designed or intended.

Countries and regions within which this artifact is targeted for use.

Explanation of why this activity definition is needed and why it has been designed as it has.

This element does not describe the usage of the activity definition. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this activity definition.

A detailed description of how the activity definition is used from a clinical perspective.

A copyright statement relating to the activity definition and/or its contents. Copyright statements are generally legal restrictions on the use and publishing of the activity definition.

Consumers must be able to determine any legal restrictions on the use of the activity definition and/or its content.

The date on which the resource content was approved by the publisher. Approval happens once when the content is officially approved for usage.

The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

The date on which the resource content was last reviewed. Review happens periodically after approval but does not change the original approval date.

If specified, this date follows the original approval date.

Gives a sense of how "current" the content is. Resources that have not been reviewed in a long time may have a risk of being less appropriate/relevant.

The period during which the activity definition content was or is planned to be in active use.

The effective period for a activity definition determines when the content is applicable for usage and is independent of publication and review dates. For example, a measure intended to be used for the year 2016 might be published in 2015.

Allows establishing a transition before a resource comes into effect and also allows for a sunsetting process when new versions of the activity definition are or are expected to be used instead.

Descriptive topics related to the content of the activity. Topics provide a high-level categorization of the activity that can be useful for filtering and searching.

High-level categorization of the definition, used for searching, sorting, and filtering.

Repositories must be able to determine how to categorize the activity definition so that it can be found by topical searches.

An individiual or organization primarily involved in the creation and maintenance of the content.

An individual or organization primarily responsible for internal coherence of the content.

An individual or organization primarily responsible for review of some aspect of the content.

An individual or organization responsible for officially endorsing the content for use in some setting.

Related artifacts such as additional documentation, justification, or bibliographic references.

Each related artifact is either an attachment, or a reference to another resource, but not both.

Activity definitions must be able to provide enough information for consumers of the content (and/or interventions or results produced by the content) to be able to determine and understand the justification for and evidence in support of the content.

A reference to a Library resource containing any formal logic used by the activity definition.

A description of the kind of resource the activity definition is representing. For example, a MedicationRequest, a ServiceRequest, or a CommunicationRequest. Typically, but not always, this is a Request resource.

May determine what types of extensions are permitted.

The kind of activity the definition is describing.

unique id for the element within a resource (for internal references)

An Extension

R5: ActivityDefinition.kind

Element ActivityDefinition.kind is mapped to FHIR R4B element ActivityDefinition.kind as SourceIsBroaderThanTarget. The kind element may only specify Request resource types to facilitate considering user input as part of processing the result of any automated clinical reasoning processes. To support creation of event resources, such as Observations, RiskAssessments, and DetectedIssues, use a Task resource with the focus of the task set to the event resource to be created. Note that the kind of resource to be created may determine what types of extensions are permitted.

Primitive value for code

A profile to which the target of the activity definition is expected to conform.

Allows profiles to be used to describe the types of activities that can be performed within a workflow, protocol, or order set.

Detailed description of the type of activity; e.g. What lab test, what procedure, what kind of encounter.

Tends to be less relevant for activities involving particular products.

Detailed type of the activity; e.g. CBC.

Allows matching performed to planned as well as validation against protocols.

Indicates the level of authority/intentionality associated with the activity and where the request should fit into the workflow chain.

Codes indicating the degree of authority/intentionality associated with a request.

Indicates how quickly the activity should be addressed with respect to other requests.

Identifies the level of importance to be assigned to actioning the request.

Set this to true if the definition is to indicate that a particular activity should NOT be performed. If true, this element should be interpreted to reinforce a negative coding. For example NPO as a code with a doNotPerform of true would still indicate to NOT perform the action.

This element is not intended to be used to communicate a decision support response to cancel an order in progress. That should be done with the "remove" type of a PlanDefinition or RequestGroup.

The period, timing or frequency upon which the described activity is to occur.

Allows prompting for activities and detection of missed planned activities.

Identifies the facility where the activity will occur; e.g. home, hospital, specific clinic, etc.

May reference a specific clinical location or may just identify a type of location.

Helps in planning of activity.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.location additional types (CodeableReference(http://hl7.org/fhir/StructureDefinition/Location)) additional types from child elements (concept)

Element ActivityDefinition.location is mapped to FHIR R4B element ActivityDefinition.location as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.location do not cover the following types: CodeableReference. The mappings for ActivityDefinition.location do not cover the following types based on type expansion: concept. May reference a specific clinical location or may just identify a type of location.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Indicates who should participate in performing the action described.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.participant.typeCanonical (new:canonical(CapabilityStatement))

Element ActivityDefinition.participant.typeCanonical has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.typeCanonical has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

R5: ActivityDefinition.participant.typeReference (new:Reference(CareTeam,Device,DeviceDefinition,Endpoint,Group,HealthcareService,Location,Organization,Patient,Practitioner,PractitionerRole,RelatedPerson))

Element ActivityDefinition.participant.typeReference has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.typeReference has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). When this element is a reference, it SHOULD be a reference to a definitional resource (for example, a location type, rather than a specific location).

R5: ActivityDefinition.participant.function (new:CodeableConcept)

Element ActivityDefinition.participant.function has a context of ActivityDefinition.participant based on following the parent source element upwards and mapping to ActivityDefinition. Element ActivityDefinition.participant.function has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The type of participant in the action.

The type of participant in the activity.

unique id for the element within a resource (for internal references)

An Extension

R5: ActivityDefinition.participant.type

Element ActivityDefinition.participant.type is mapped to FHIR R4B element ActivityDefinition.participant.type as SourceIsBroaderThanTarget.

Primitive value for code

The role the participant should play in performing the described action.

Defines roles played by participants for the action.

Identifies the food, drug or other product being consumed or supplied in the activity.

Code describing the type of substance or medication.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.product[x]

Element ActivityDefinition.product[x] is mapped to FHIR R4B element ActivityDefinition.product[x] as SourceIsBroaderThanTarget. The standard extension alternate-reference has been mapped as the representation of FHIR R5 element ActivityDefinition.product[x] with unmapped reference targets: SubstanceDefinition. Source element ActivityDefinition.product[x] has unmapped reference types. While the target element ActivityDefinition.product[x] is a choice type and does not allow extensions, the alternate-reference extension can be applied to Reference values within it.

Identifies the quantity expected to be consumed at once (per dose, per meal, etc.).

Provides detailed dosage instructions in the same way that they are described for MedicationRequest resources.

If a dosage instruction is used, the definition should not specify timing or quantity.

Indicates the sites on the subject's body where the procedure should be performed (I.e. the target sites).

Only used if not implicit in the code found in ServiceRequest.type.

A code that identifies the anatomical location.

Knowing where the procedure is made is important for tracking if multiple sites are possible.

Defines specimen requirements for the action to be performed, such as required specimens for a lab test.

Needed to represent lab order definitions.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.specimenRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/SpecimenDefinition)) additional types from child elements (value)

Element ActivityDefinition.specimenRequirement is mapped to FHIR R4B element ActivityDefinition.specimenRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.specimenRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.specimenRequirement do not cover the following types based on type expansion: value.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Defines observation requirements for the action to be performed, such as body weight or surface area.

Needed to represent observation definitions.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.observationRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/ObservationDefinition)) additional types from child elements (value)

Element ActivityDefinition.observationRequirement is mapped to FHIR R4B element ActivityDefinition.observationRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.observationRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.observationRequirement do not cover the following types based on type expansion: value.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

Defines the observations that are expected to be produced by the action.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

An Extension

R5: ActivityDefinition.observationResultRequirement additional types (canonical(http://hl7.org/fhir/StructureDefinition/ObservationDefinition)) additional types from child elements (value)

Element ActivityDefinition.observationResultRequirement is mapped to FHIR R4B element ActivityDefinition.observationResultRequirement as SourceIsBroaderThanTarget. The mappings for ActivityDefinition.observationResultRequirement do not cover the following types: canonical. The mappings for ActivityDefinition.observationResultRequirement do not cover the following types based on type expansion: value.

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

Plain text narrative that identifies the resource in addition to the resource reference.

This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

A reference to a StructureMap resource that defines a transform that can be executed to produce the intent resource using the ActivityDefinition instance as the input.

Note that if both a transform and dynamic values are specified, the dynamic values will be applied to the result of the transform.

Dynamic values that will be evaluated to produce values for elements of the resulting resource. For example, if the dosage of a medication must be computed based on the patient's weight, a dynamic value would be used to specify an expression that calculated the weight, and the path on the request resource that would contain the result.

Dynamic values are applied in the order in which they are defined in the ActivityDefinition. Note that if both a transform and dynamic values are specified, the dynamic values will be applied to the result of the transform.

Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

The path to the element to be customized. This is the path on the resource that will hold the result of the calculation defined by the expression. The specified path SHALL be a FHIRPath resolveable on the specified target type of the ActivityDefinition, and SHALL consist only of identifiers, constant indexers, and a restricted subset of functions. The path is allowed to contain qualifiers (.) to traverse sub-elements, as well as indexers ([x]) to traverse multiple-cardinality sub-elements (see the Simple FHIRPath Profile for full details).

The path attribute contains a Simple FHIRPath Subset that allows path traversal, but not calculation.

An expression specifying the value of the customized element.

The expression may be inlined, or may be a reference to a named expression within a logic library referenced by the library element.