ExtensionConceptMap_Property - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR R4B v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR R4B - Downloaded Version null See the Directory of published versions

Extension: ExtensionConceptMap_Property - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-ConceptMap.property extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ConceptMap.property` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R5: Additional properties of the mapping (new)Optional Extensions Element
Comments	Element `ConceptMap.property` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Properties may be used to supply for example, mapping priority, provenance, presentation hints, flag as experimental, and additional documentation. Multiple occurrences of ConceptMap.group.element.target.property may occur for a ConceptMap.property where ConceptMap.group.element.target.property.code is the same and the values in ConceptMap.group.element.target.property.value differ.
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (hasValue() or (children().count() > id.count()) or $this is Parameters) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	20..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:code
Slice Name	code
Definition	R5: `ConceptMap.property.code` (new:code)
Short	R5: Identifies the property on the mappings, and when referred to in the $translate operation (new)Additional content defined by implementations
Comments	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
8. Extension.extension:code.value[x]
Definition	A code that is used to identify the property. The code is used internally (in ConceptMap.group.element.target.property.code) and also in the $translate operation. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Identifies the property on the mappings, and when referred to in the $translate operationValue of extension
Control	10..1
Type	code, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:uri
Slice Name	uri
Definition	R5: `ConceptMap.property.uri` (new:uri)
Short	R5: Formal identifier for the property (new)Additional content defined by implementations
Comments	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:uri.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`uri`
14. Extension.extension:uri.value[x]
Definition	Reference to the formal meaning of the property. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Formal identifier for the propertyValue of extension
Control	0..1
Type	uri, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:description
Slice Name	description
Definition	R5: `ConceptMap.property.description` (new:string)
Short	R5: Why the property is defined, and/or what it conveys (new)Additional content defined by implementations
Comments	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
20. Extension.extension:description.value[x]
Definition	A description of the property - why it is defined, and how its value might be used. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Why the property is defined, and/or what it conveysValue of extension
Control	0..1
Type	string, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Extension.extension:type
Slice Name	type
Definition	R5: `ConceptMap.property.type` (new:code)
Short	R5: Coding \| string \| integer \| boolean \| dateTime \| decimal \| code (new)Additional content defined by implementations
Comments	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
26. Extension.extension:type.value[x]
Definition	The type of the property value. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Coding \| string \| integer \| boolean \| dateTime \| decimal \| codeValue of extension
Control	10..1
Binding	The codes SHALL be taken from For codes, see R5ConceptmapPropertyTypeForR4B (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-conceptmap-property-type-for-R4B\|0.1.0`) The type of a property value.
Type	code, date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:system
Slice Name	system
Definition	R5: `ConceptMap.property.system` (new:canonical(CodeSystem))
Short	R5: The CodeSystem from which code values come (new)Additional content defined by implementations
Comments	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:system.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`system`
32. Extension.extension:system.value[x]
Definition	The CodeSystem that defines the codes from which values of type `code` in property values. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The CodeSystem from which code values comeValue of extension
Control	0..1
Type	canonical(Cross-version Profile for R5.CodeSystem for use in FHIR R4B, CodeSystem), date, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, RatioRange, Coding, SampledData, id, positiveInt, Distance, Period, Duration, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, CodeableReference, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ConceptMap.property`
36. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ConceptMap.property` (new:BackboneElement)
Short	R5: Additional properties of the mapping (new)
Comments	Element `ConceptMap.property` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Properties may be used to supply for example, mapping priority, provenance, presentation hints, flag as experimental, and additional documentation. Multiple occurrences of ConceptMap.group.element.target.property may occur for a ConceptMap.property where ConceptMap.group.element.target.property.code is the same and the values in ConceptMap.group.element.target.property.value differ.
Control	0..*
Is Modifier	false
2. Extension.extension
Control	2..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:code
Slice Name	code
Definition	R5: `ConceptMap.property.code` (new:code)
Short	R5: Identifies the property on the mappings, and when referred to in the $translate operation (new)
Comments	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
6. Extension.extension:code.url
Control	1..1
Fixed Value	`code`
8. Extension.extension:code.value[x]
Definition	A code that is used to identify the property. The code is used internally (in ConceptMap.group.element.target.property.code) and also in the $translate operation.
Short	Identifies the property on the mappings, and when referred to in the $translate operation
Control	1..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:uri
Slice Name	uri
Definition	R5: `ConceptMap.property.uri` (new:uri)
Short	R5: Formal identifier for the property (new)
Comments	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
12. Extension.extension:uri.url
Control	1..1
Fixed Value	`uri`
14. Extension.extension:uri.value[x]
Definition	Reference to the formal meaning of the property.
Short	Formal identifier for the property
Control	0..1
Type	uri
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
16. Extension.extension:description
Slice Name	description
Definition	R5: `ConceptMap.property.description` (new:string)
Short	R5: Why the property is defined, and/or what it conveys (new)
Comments	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
18. Extension.extension:description.url
Control	1..1
Fixed Value	`description`
20. Extension.extension:description.value[x]
Definition	A description of the property - why it is defined, and how its value might be used.
Short	Why the property is defined, and/or what it conveys
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
22. Extension.extension:type
Slice Name	type
Definition	R5: `ConceptMap.property.type` (new:code)
Short	R5: Coding \| string \| integer \| boolean \| dateTime \| decimal \| code (new)
Comments	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
24. Extension.extension:type.url
Control	1..1
Fixed Value	`type`
26. Extension.extension:type.value[x]
Definition	The type of the property value.
Short	Coding \| string \| integer \| boolean \| dateTime \| decimal \| code
Control	1..1
Binding	The codes SHALL be taken from R5ConceptmapPropertyTypeForR4B (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-conceptmap-property-type-for-R4B\|0.1.0`) The type of a property value.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
28. Extension.extension:system
Slice Name	system
Definition	R5: `ConceptMap.property.system` (new:canonical(CodeSystem))
Short	R5: The CodeSystem from which code values come (new)
Comments	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
30. Extension.extension:system.url
Control	1..1
Fixed Value	`system`
32. Extension.extension:system.value[x]
Definition	The CodeSystem that defines the codes from which values of type `code` in property values.
Short	The CodeSystem from which code values come
Control	0..1
Type	canonical(Cross-version Profile for R5.CodeSystem for use in FHIR R4B, CodeSystem)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
34. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ConceptMap.property`
36. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ConceptMap.property` (new:BackboneElement)
Short	R5: Additional properties of the mapping (new)
Comments	Element `ConceptMap.property` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element). Properties may be used to supply for example, mapping priority, provenance, presentation hints, flag as experimental, and additional documentation. Multiple occurrences of ConceptMap.group.element.target.property may occur for a ConceptMap.property where ConceptMap.group.element.target.property.code is the same and the values in ConceptMap.group.element.target.property.value differ.
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children unless an empty Parameters resource (`hasValue() or (children().count() > id.count()) or $this is Parameters`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	2..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:code
Slice Name	code
Definition	R5: `ConceptMap.property.code` (new:code)
Short	R5: Identifies the property on the mappings, and when referred to in the $translate operation (new)
Comments	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.code` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.code` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.code` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:code.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:code.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
14. Extension.extension:code.value[x]
Definition	A code that is used to identify the property. The code is used internally (in ConceptMap.group.element.target.property.code) and also in the $translate operation.
Short	Identifies the property on the mappings, and when referred to in the $translate operation
Control	1..1
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:uri
Slice Name	uri
Definition	R5: `ConceptMap.property.uri` (new:uri)
Short	R5: Formal identifier for the property (new)
Comments	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.uri` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.uri` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.uri` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:uri.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:uri.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:uri.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`uri`
24. Extension.extension:uri.value[x]
Definition	Reference to the formal meaning of the property.
Short	Formal identifier for the property
Control	0..1
Type	uri
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:description
Slice Name	description
Definition	R5: `ConceptMap.property.description` (new:string)
Short	R5: Why the property is defined, and/or what it conveys (new)
Comments	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.description` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.description` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.description` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:description.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:description.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
34. Extension.extension:description.value[x]
Definition	A description of the property - why it is defined, and how its value might be used.
Short	Why the property is defined, and/or what it conveys
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:type
Slice Name	type
Definition	R5: `ConceptMap.property.type` (new:code)
Short	R5: Coding \| string \| integer \| boolean \| dateTime \| decimal \| code (new)
Comments	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.type` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.type` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.type` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
44. Extension.extension:type.value[x]
Definition	The type of the property value.
Short	Coding \| string \| integer \| boolean \| dateTime \| decimal \| code
Control	1..1
Binding	The codes SHALL be taken from R5ConceptmapPropertyTypeForR4B (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-conceptmap-property-type-for-R4B\|0.1.0`) The type of a property value.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:system
Slice Name	system
Definition	R5: `ConceptMap.property.system` (new:canonical(CodeSystem))
Short	R5: The CodeSystem from which code values come (new)
Comments	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `ConceptMap.property.system` is part of an existing definition because parent element `ConceptMap.property` requires a cross-version extension. Element `ConceptMap.property.system` has a context of ConceptMap based on following the parent source element upwards and mapping to `ConceptMap`. Element `ConceptMap.property.system` has no mapping targets in FHIR R4B. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:system.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	id
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:system.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:system.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`system`
54. Extension.extension:system.value[x]
Definition	The CodeSystem that defines the codes from which values of type `code` in property values.
Short	The CodeSystem from which code values come
Control	0..1
Type	canonical(Cross-version Profile for R5.CodeSystem for use in FHIR R4B, CodeSystem)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ConceptMap.property`
58. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, CodeableReference, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, RatioRange, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)