Profile_R5_ArtifactAssessment_R4 - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR R4 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R5_ArtifactAssessment_R4 - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-ArtifactAssessment resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Is Modifier	false
Summary	false
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (`contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (`contained.meta.security.empty()`) dom-6: A resource should have narrative for robust management (text.`div`.exists()) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference \| %resource.descendants().as(canonical) \| %resource.descendants().as(uri) \| %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty()) dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.
Control	0..1
Type	uri
Is Modifier	true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:title
Slice Name	title
Definition	R5: `ArtifactAssessment.title` (new:string)
Short	R5: A short title for the assessment for use in displaying and selecting (new)
Comments	Element `ArtifactAssessment.title` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: A short title for the assessment for use in displaying and selecting (new)) (Extension Type: string)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Basic.extension:citeAs
Slice Name	citeAs
Definition	R5: `ArtifactAssessment.citeAs[x]` (new:markdown, Reference(Citation))
Short	R5: How to cite the comment or rating (new)
Comments	Element `ArtifactAssessment.citeAs[x]` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.citeAs[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: How to cite the comment or rating (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Citation for use in FHIR R4, Basic), markdown)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Basic.extension:date
Slice Name	date
Definition	R5: `ArtifactAssessment.date` (new:dateTime)
Short	R5: Date last changed (new)
Comments	Element `ArtifactAssessment.date` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.date` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the artifact assessment. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Date last changed (new)) (Extension Type: dateTime)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Basic.extension:copyright
Slice Name	copyright
Definition	R5: `ArtifactAssessment.copyright` (new:markdown)
Short	R5: Use and/or publishing restrictions (new)
Comments	Element `ArtifactAssessment.copyright` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.copyright` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Use and/or publishing restrictions (new)) (Extension Type: markdown)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
14. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R5: `ArtifactAssessment.approvalDate` (new:date)
Short	R5: When the artifact assessment was approved by publisher (new)
Comments	Element `ArtifactAssessment.approvalDate` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.approvalDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: When the artifact assessment was approved by publisher (new)) (Extension Type: date)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
16. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R5: `ArtifactAssessment.lastReviewDate` (new:date)
Short	R5: When the artifact assessment was last reviewed by the publisher (new)
Comments	Element `ArtifactAssessment.lastReviewDate` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.lastReviewDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: When the artifact assessment was last reviewed by the publisher (new)) (Extension Type: date)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Basic.extension:artifact
Slice Name	artifact
Definition	R5: `ArtifactAssessment.artifact[x]` (new:canonical, Reference(Resource), uri)
Short	R5: The artifact assessed, commented upon or rated (new)
Comments	Element `ArtifactAssessment.artifact[x]` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.artifact[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: The artifact assessed, commented upon or rated (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource), canonical, uri)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
20. Basic.extension:content
Slice Name	content
Definition	R5: `ArtifactAssessment.content` (new:BackboneElement)
Short	R5: Comment, classifier, or rating content (new)
Comments	Element `ArtifactAssessment.content` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
22. Basic.extension:component
Slice Name	component
Definition	R5: `ArtifactAssessment.content.component` (new:ArtifactAssessment.content)
Short	R5: Contained content (new)
Comments	Element `ArtifactAssessment.content.component` is part of an existing definition because parent element `ArtifactAssessment.content` requires a cross-version extension. Element `ArtifactAssessment.content.component` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.content.component` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Basic.extension:workflowStatus
Slice Name	workflowStatus
Definition	R5: `ArtifactAssessment.workflowStatus` (new:code)
Short	R5: submitted \| triaged \| waiting-for-input \| resolved-no-change \| resolved-change-required \| deferred \| duplicate \| applied \| published \| entered-in-error (new)
Comments	Element `ArtifactAssessment.workflowStatus` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.workflowStatus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: submitted \| triaged \| waiting-for-input \| resolved-no-change \| resolved-change-required \| deferred \| duplicate \| applied \| published \| entered-in-error (new)) (Extension Type: code)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
26. Basic.extension:disposition
Slice Name	disposition
Definition	R5: `ArtifactAssessment.disposition` (new:code)
Short	R5: unresolved \| not-persuasive \| persuasive \| persuasive-with-modification \| not-persuasive-with-modification (new)
Comments	Element `ArtifactAssessment.disposition` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.disposition` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: unresolved \| not-persuasive \| persuasive \| persuasive-with-modification \| not-persuasive-with-modification (new)) (Extension Type: code)
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Basic.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions. Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).
Short	Extensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summary	false
Requirements	Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see BasicResourceTypeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|4.0.1 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|4.0.1`) Codes for identifying types of resources not yet defined by FHIR.
Type	CodeableConcept
Is Modifier	true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	1..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:title
Slice Name	title
Definition	R5: `ArtifactAssessment.title` (new:string)
Short	R5: A short title for the assessment for use in displaying and selecting (new)
Comments	Element `ArtifactAssessment.title` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: A short title for the assessment for use in displaying and selecting (new)) (Extension Type: string)
6. Basic.extension:citeAs
Slice Name	citeAs
Definition	R5: `ArtifactAssessment.citeAs[x]` (new:markdown, Reference(Citation))
Short	R5: How to cite the comment or rating (new)
Comments	Element `ArtifactAssessment.citeAs[x]` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.citeAs[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: How to cite the comment or rating (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Citation for use in FHIR R4, Basic), markdown)
8. Basic.extension:date
Slice Name	date
Definition	R5: `ArtifactAssessment.date` (new:dateTime)
Short	R5: Date last changed (new)
Comments	Element `ArtifactAssessment.date` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.date` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the artifact assessment. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.
Control	0..1
Type	Extension(R5: Date last changed (new)) (Extension Type: dateTime)
10. Basic.extension:copyright
Slice Name	copyright
Definition	R5: `ArtifactAssessment.copyright` (new:markdown)
Short	R5: Use and/or publishing restrictions (new)
Comments	Element `ArtifactAssessment.copyright` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.copyright` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Use and/or publishing restrictions (new)) (Extension Type: markdown)
12. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R5: `ArtifactAssessment.approvalDate` (new:date)
Short	R5: When the artifact assessment was approved by publisher (new)
Comments	Element `ArtifactAssessment.approvalDate` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.approvalDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.
Control	0..1
Type	Extension(R5: When the artifact assessment was approved by publisher (new)) (Extension Type: date)
14. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R5: `ArtifactAssessment.lastReviewDate` (new:date)
Short	R5: When the artifact assessment was last reviewed by the publisher (new)
Comments	Element `ArtifactAssessment.lastReviewDate` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.lastReviewDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.
Control	0..1
Type	Extension(R5: When the artifact assessment was last reviewed by the publisher (new)) (Extension Type: date)
16. Basic.extension:artifact
Slice Name	artifact
Definition	R5: `ArtifactAssessment.artifact[x]` (new:canonical, Reference(Resource), uri)
Short	R5: The artifact assessed, commented upon or rated (new)
Comments	Element `ArtifactAssessment.artifact[x]` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.artifact[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension(R5: The artifact assessed, commented upon or rated (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource), canonical, uri)
18. Basic.extension:content
Slice Name	content
Definition	R5: `ArtifactAssessment.content` (new:BackboneElement)
Short	R5: Comment, classifier, or rating content (new)
Comments	Element `ArtifactAssessment.content` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)
20. Basic.extension:component
Slice Name	component
Definition	R5: `ArtifactAssessment.content.component` (new:ArtifactAssessment.content)
Short	R5: Contained content (new)
Comments	Element `ArtifactAssessment.content.component` is part of an existing definition because parent element `ArtifactAssessment.content` requires a cross-version extension. Element `ArtifactAssessment.content.component` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.content.component` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)
22. Basic.extension:workflowStatus
Slice Name	workflowStatus
Definition	R5: `ArtifactAssessment.workflowStatus` (new:code)
Short	R5: submitted \| triaged \| waiting-for-input \| resolved-no-change \| resolved-change-required \| deferred \| duplicate \| applied \| published \| entered-in-error (new)
Comments	Element `ArtifactAssessment.workflowStatus` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.workflowStatus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: submitted \| triaged \| waiting-for-input \| resolved-no-change \| resolved-change-required \| deferred \| duplicate \| applied \| published \| entered-in-error (new)) (Extension Type: code)
24. Basic.extension:disposition
Slice Name	disposition
Definition	R5: `ArtifactAssessment.disposition` (new:code)
Short	R5: unresolved \| not-persuasive \| persuasive \| persuasive-with-modification \| not-persuasive-with-modification (new)
Comments	Element `ArtifactAssessment.disposition` is not mapped to FHIR R4, since FHIR R5 `ArtifactAssessment` is not mapped. Element `ArtifactAssessment.disposition` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: unresolved \| not-persuasive \| persuasive \| persuasive-with-modification \| not-persuasive-with-modification (new)) (Extension Type: code)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Is Modifier false

Summary false

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Is Modifier false

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control 0..1

Type

uri

Is Modifier true because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

The codes SHOULD be taken from CommonLanguages

(preferred to http://hl7.org/fhir/ValueSet/languages|4.0.1)

A human language.

Additional Bindings

Purpose

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control 0..1

Type

Narrative

Is Modifier false

Summary false

Alternate Names narrative, html, xhtml, display

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control 0..*

Type

Resource

Is Modifier false

Summary false

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 1..*

Type

Extension

Is Modifier false

Summary false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:title

Slice Name title

Definition

R5: ArtifactAssessment.title (new:string)

Short R5: A short title for the assessment for use in displaying and selecting (new)

Comments

Element ArtifactAssessment.title is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.title has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: A short title for the assessment for use in displaying and selecting (new)) (Extension Type: string)

Is Modifier false

Summary false

18. Basic.extension:citeAs

Slice Name citeAs

Definition

R5: ArtifactAssessment.citeAs[x] (new:markdown, Reference(Citation))

Short R5: How to cite the comment or rating (new)

Comments

Element ArtifactAssessment.citeAs[x] is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.citeAs[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: How to cite the comment or rating (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Citation for use in FHIR R4, Basic), markdown)

Is Modifier false

Summary false

20. Basic.extension:date

Slice Name date

Definition

R5: ArtifactAssessment.date (new:dateTime)

Short R5: Date last changed (new)

Comments

Element ArtifactAssessment.date is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.date has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the artifact assessment. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Date last changed (new)) (Extension Type: dateTime)

Is Modifier false

Summary false

22. Basic.extension:copyright

Slice Name copyright

Definition

R5: ArtifactAssessment.copyright (new:markdown)

Short R5: Use and/or publishing restrictions (new)

Comments

Element ArtifactAssessment.copyright is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.copyright has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Use and/or publishing restrictions (new)) (Extension Type: markdown)

Is Modifier false

Summary false

24. Basic.extension:approvalDate

Slice Name approvalDate

Definition

R5: ArtifactAssessment.approvalDate (new:date)

Short R5: When the artifact assessment was approved by publisher (new)

Comments

Element ArtifactAssessment.approvalDate is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.approvalDate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The 'date' element may be more recent than the approval date because of minor changes or editorial corrections.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: When the artifact assessment was approved by publisher (new)) (Extension Type: date)

Is Modifier false

Summary false

26. Basic.extension:lastReviewDate

Slice Name lastReviewDate

Definition

R5: ArtifactAssessment.lastReviewDate (new:date)

Short R5: When the artifact assessment was last reviewed by the publisher (new)

Comments

Element ArtifactAssessment.lastReviewDate is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.lastReviewDate has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: When the artifact assessment was last reviewed by the publisher (new)) (Extension Type: date)

Is Modifier false

Summary false

28. Basic.extension:artifact

Slice Name artifact

Definition

R5: ArtifactAssessment.artifact[x] (new:canonical, Reference(Resource), uri)

Short R5: The artifact assessed, commented upon or rated (new)

Comments

Element ArtifactAssessment.artifact[x] is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.artifact[x] has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 1..1
This element is affected by the following invariants: ele-1

Type Extension(R5: The artifact assessed, commented upon or rated (new)) (Extension Type: Choice of: Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource), canonical, uri)

Is Modifier false

Summary false

30. Basic.extension:content

Slice Name content

Definition

R5: ArtifactAssessment.content (new:BackboneElement)

Short R5: Comment, classifier, or rating content (new)

Comments

Element ArtifactAssessment.content is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.content has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)

Is Modifier false

32. Basic.extension:component

Slice Name component

Definition

R5: ArtifactAssessment.content.component (new:ArtifactAssessment.content)

Short R5: Contained content (new)

Comments

Element ArtifactAssessment.content.component is part of an existing definition because parent element ArtifactAssessment.content requires a cross-version extension. Element ArtifactAssessment.content.component is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.content.component has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Comment, classifier, or rating content (new)) (Complex Extension)

Is Modifier false

34. Basic.extension:workflowStatus

Slice Name workflowStatus

Definition

R5: ArtifactAssessment.workflowStatus (new:code)

Comments

Element ArtifactAssessment.workflowStatus is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.workflowStatus has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Is Modifier false

Summary false

36. Basic.extension:disposition

Slice Name disposition

Definition

R5: ArtifactAssessment.disposition (new:code)

Short R5: unresolved | not-persuasive | persuasive | persuasive-with-modification | not-persuasive-with-modification (new)

Comments

Element ArtifactAssessment.disposition is not mapped to FHIR R4, since FHIR R5 ArtifactAssessment is not mapped. Element ArtifactAssessment.disposition has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: unresolved | not-persuasive | persuasive | persuasive-with-modification | not-persuasive-with-modification (new)) (Extension Type: code)

Is Modifier false

Summary false

38. Basic.modifierExtension

Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

Short Extensions that cannot be ignored

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control 0..*

Type

Extension

Is Modifier true because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them

Summary false

Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Names extensions, user content

40. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Is Modifier false

Summary true

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

42. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see BasicResourceTypes
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|4.0.1)

Codes for identifying types of resources not yet defined by FHIR.

Type

CodeableConcept

Is Modifier true because This element determines what kind of resource is being represented which drives the meaning of all of the other elements.

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

44. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Is Modifier false

Summary true

Requirements

Needed for partitioning the resource by Patient.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

46. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Is Modifier false

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

48. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, PractitionerRole, Patient, RelatedPerson, Organization)

Is Modifier false

Summary true

Requirements

Needed for partitioning the resource.

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))