ExtensionTestPlan_TestCase - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR R4 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions

Extension: ExtensionTestPlan_TestCase - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-TestPlan.testCase extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `TestPlan.testCase` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R5: The test cases that constitute this plan (new)Optional Extensions Element
Comments	Element `TestPlan.testCase` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:sequence
Slice Name	sequence
Definition	R5: `TestPlan.testCase.sequence` (new:integer)
Short	R5: Sequence of test case in the test plan (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:sequence.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`sequence`
8. Extension.extension:sequence.value[x]
Definition	Sequence of test case - an ordinal number that indicates the order for the present test case in the test plan. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Sequence of test case in the test planValue of extension
Control	0..1
Type	integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:scope
Slice Name	scope
Definition	R5: `TestPlan.testCase.scope` (new:Reference)
Short	R5: The scope or artifact covered by the case (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:scope.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`scope`
14. Extension.extension:scope.value[x]
Definition	The scope or artifact covered by the case, when the individual test case is associated with a testable artifact. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The scope or artifact covered by the caseValue of extension
Control	0..1
Type	Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:dependency
Slice Name	dependency
Definition	R5: `TestPlan.testCase.dependency` (new:BackboneElement)
Short	R5: Required criteria to execute the test case (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:dependency.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
20. Extension.extension:dependency.extension:description
Slice Name	description
Definition	R5: `TestPlan.testCase.dependency.description` (new:markdown)
Short	R5: Description of the criteria (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
22. Extension.extension:dependency.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
24. Extension.extension:dependency.extension:description.value[x]
Definition	Description of the criteria. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Description of the criteriaValue of extension
Control	0..1
Type	markdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
26. Extension.extension:dependency.extension:predecessor
Slice Name	predecessor
Definition	R5: `TestPlan.testCase.dependency.predecessor` (new:Reference)
Short	R5: Link to predecessor test plans (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
28. Extension.extension:dependency.extension:predecessor.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`predecessor`
30. Extension.extension:dependency.extension:predecessor.value[x]
Definition	Link to predecessor test plans. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Link to predecessor test plansValue of extension
Control	0..1
Type	Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
32. Extension.extension:dependency.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`dependency`
34. Extension.extension:dependency.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
36. Extension.extension:testRun
Slice Name	testRun
Definition	R5: `TestPlan.testCase.testRun` (new:BackboneElement)
Short	R5: The actual test to be executed (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
38. Extension.extension:testRun.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Extension.extension:testRun.extension:narrative
Slice Name	narrative
Definition	R5: `TestPlan.testCase.testRun.narrative` (new:markdown)
Short	R5: The narrative description of the tests (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
42. Extension.extension:testRun.extension:narrative.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`narrative`
44. Extension.extension:testRun.extension:narrative.value[x]
Definition	The narrative description of the tests. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The narrative description of the testsValue of extension
Control	0..1
Type	markdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
46. Extension.extension:testRun.extension:script
Slice Name	script
Definition	R5: `TestPlan.testCase.testRun.script` (new:BackboneElement)
Short	R5: The test cases in a structured language e.g. gherkin, Postman, or FHIR TestScript (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
48. Extension.extension:testRun.extension:script.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
50. Extension.extension:testRun.extension:script.extension:language
Slice Name	language
Definition	R5: `TestPlan.testCase.testRun.script.language` (new:CodeableConcept)
Short	R5: The language for the test cases e.g. 'gherkin', 'testscript' (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
52. Extension.extension:testRun.extension:script.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
54. Extension.extension:testRun.extension:script.extension:language.value[x]
Definition	The language for the test cases e.g. 'gherkin', 'testscript'. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The language for the test cases e.g. 'gherkin', 'testscript'Value of extension
Control	0..1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
56. Extension.extension:testRun.extension:script.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testRun.script.source[x]` (new:Reference, string)
Short	R5: The actual content of the cases - references to TestScripts or externally defined content (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
58. Extension.extension:testRun.extension:script.extension:source.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`source`
60. Extension.extension:testRun.extension:script.extension:source.value[x]
Definition	The actual content of the cases - references to TestScripts or externally defined content. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The actual content of the cases - references to TestScripts or externally defined contentValue of extension
Control	0..1
Type	Choice of: string, Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
62. Extension.extension:testRun.extension:script.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`script`
64. Extension.extension:testRun.extension:script.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Extension.extension:testRun.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`testRun`
68. Extension.extension:testRun.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
70. Extension.extension:testData
Slice Name	testData
Definition	R5: `TestPlan.testCase.testData` (new:BackboneElement)
Short	R5: The test data used in the test case (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
72. Extension.extension:testData.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	10..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
74. Extension.extension:testData.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.testData.type` (new:Coding)
Short	R5: The type of test data description, e.g. 'synthea' (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
76. Extension.extension:testData.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
78. Extension.extension:testData.extension:type.value[x]
Definition	The type of test data description, e.g. 'synthea'. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The type of test data description, e.g. 'synthea'Value of extension
Control	10..1
Type	Coding, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
80. Extension.extension:testData.extension:content
Slice Name	content
Definition	R5: `TestPlan.testCase.testData.content` (new:Reference)
Short	R5: The actual test resources when they exist (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
82. Extension.extension:testData.extension:content.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`content`
84. Extension.extension:testData.extension:content.value[x]
Definition	The actual test resources when they exist. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	The actual test resources when they existValue of extension
Control	0..1
Type	Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
86. Extension.extension:testData.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testData.source[x]` (new:Reference, string)
Short	R5: Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
88. Extension.extension:testData.extension:source.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`source`
90. Extension.extension:testData.extension:source.value[x]
Definition	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etcValue of extension
Control	0..1
Type	Choice of: string, Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
92. Extension.extension:testData.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`testData`
94. Extension.extension:testData.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Extension.extension:assertion
Slice Name	assertion
Definition	R5: `TestPlan.testCase.assertion` (new:BackboneElement)
Short	R5: Test assertions or expectations (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
98. Extension.extension:assertion.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
100. Extension.extension:assertion.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.assertion.type` (new:CodeableConcept)
Short	R5: Assertion type - for example 'informative' or 'required' (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
102. Extension.extension:assertion.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
104. Extension.extension:assertion.extension:type.value[x]
Definition	The test assertion type - this can be used to group assertions as 'required' or 'optional', or can be used for other classification of the assertion. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Assertion type - for example 'informative' or 'required'Value of extension
Control	0..1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
106. Extension.extension:assertion.extension:object
Slice Name	object
Definition	R5: `TestPlan.testCase.assertion.object` (new:CodeableReference)
Short	R5: The focus or object of the assertion (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
108. Extension.extension:assertion.extension:object.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
110. Extension.extension:assertion.extension:object.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` valueAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
112. Extension.extension:assertion.extension:object.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
114. Extension.extension:assertion.extension:object.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	10..1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`CodeableReference`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
116. Extension.extension:assertion.extension:object.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)Additional content defined by implementations
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
118. Extension.extension:assertion.extension:object.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`concept`
120. Extension.extension:assertion.extension:object.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reference to a concept (by class)Value of extension
Control	0..1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
122. Extension.extension:assertion.extension:object.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)Additional content defined by implementations
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
124. Extension.extension:assertion.extension:object.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reference`
126. Extension.extension:assertion.extension:object.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reference to a resource (by instance)Value of extension
Control	0..1
Type	Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
128. Extension.extension:assertion.extension:object.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`object`
130. Extension.extension:assertion.extension:object.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
132. Extension.extension:assertion.extension:result
Slice Name	result
Definition	R5: `TestPlan.testCase.assertion.result` (new:CodeableReference)
Short	R5: The actual result assertion (new)Additional content defined by implementations
Comments	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
134. Extension.extension:assertion.extension:result.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
136. Extension.extension:assertion.extension:result.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` valueAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
138. Extension.extension:assertion.extension:result.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
140. Extension.extension:assertion.extension:result.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	10..1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`CodeableReference`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
142. Extension.extension:assertion.extension:result.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)Additional content defined by implementations
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
144. Extension.extension:assertion.extension:result.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`concept`
146. Extension.extension:assertion.extension:result.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reference to a concept (by class)Value of extension
Control	0..1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
148. Extension.extension:assertion.extension:result.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)Additional content defined by implementations
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
150. Extension.extension:assertion.extension:result.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reference`
152. Extension.extension:assertion.extension:result.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reference to a resource (by instance)Value of extension
Control	0..1
Type	Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
154. Extension.extension:assertion.extension:result.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`result`
156. Extension.extension:assertion.extension:result.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
158. Extension.extension:assertion.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`assertion`
160. Extension.extension:assertion.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
162. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-TestPlan.testCase`
164. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `TestPlan.testCase` (new:BackboneElement)
Short	R5: The test cases that constitute this plan (new)
Comments	Element `TestPlan.testCase` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:sequence
Slice Name	sequence
Definition	R5: `TestPlan.testCase.sequence` (new:integer)
Short	R5: Sequence of test case in the test plan (new)
Comments	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
6. Extension.extension:sequence.url
Control	1..1
Fixed Value	`sequence`
8. Extension.extension:sequence.value[x]
Definition	Sequence of test case - an ordinal number that indicates the order for the present test case in the test plan.
Short	Sequence of test case in the test plan
Control	0..1
Type	integer
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:scope
Slice Name	scope
Definition	R5: `TestPlan.testCase.scope` (new:Reference)
Short	R5: The scope or artifact covered by the case (new)
Comments	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
12. Extension.extension:scope.url
Control	1..1
Fixed Value	`scope`
14. Extension.extension:scope.value[x]
Definition	The scope or artifact covered by the case, when the individual test case is associated with a testable artifact.
Short	The scope or artifact covered by the case
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:dependency
Slice Name	dependency
Definition	R5: `TestPlan.testCase.dependency` (new:BackboneElement)
Short	R5: Required criteria to execute the test case (new)
Comments	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
18. Extension.extension:dependency.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
20. Extension.extension:dependency.extension:description
Slice Name	description
Definition	R5: `TestPlan.testCase.dependency.description` (new:markdown)
Short	R5: Description of the criteria (new)
Comments	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
22. Extension.extension:dependency.extension:description.url
Control	1..1
Fixed Value	`description`
24. Extension.extension:dependency.extension:description.value[x]
Definition	Description of the criteria.
Short	Description of the criteria
Control	0..1
Type	markdown
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
26. Extension.extension:dependency.extension:predecessor
Slice Name	predecessor
Definition	R5: `TestPlan.testCase.dependency.predecessor` (new:Reference)
Short	R5: Link to predecessor test plans (new)
Comments	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
28. Extension.extension:dependency.extension:predecessor.url
Control	1..1
Fixed Value	`predecessor`
30. Extension.extension:dependency.extension:predecessor.value[x]
Definition	Link to predecessor test plans.
Short	Link to predecessor test plans
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
32. Extension.extension:dependency.url
Control	1..1
Fixed Value	`dependency`
34. Extension.extension:dependency.value[x]
Control	0..0
36. Extension.extension:testRun
Slice Name	testRun
Definition	R5: `TestPlan.testCase.testRun` (new:BackboneElement)
Short	R5: The actual test to be executed (new)
Comments	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
38. Extension.extension:testRun.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
40. Extension.extension:testRun.extension:narrative
Slice Name	narrative
Definition	R5: `TestPlan.testCase.testRun.narrative` (new:markdown)
Short	R5: The narrative description of the tests (new)
Comments	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
42. Extension.extension:testRun.extension:narrative.url
Control	1..1
Fixed Value	`narrative`
44. Extension.extension:testRun.extension:narrative.value[x]
Definition	The narrative description of the tests.
Short	The narrative description of the tests
Control	0..1
Type	markdown
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
46. Extension.extension:testRun.extension:script
Slice Name	script
Definition	R5: `TestPlan.testCase.testRun.script` (new:BackboneElement)
Short	R5: The test cases in a structured language e.g. gherkin, Postman, or FHIR TestScript (new)
Comments	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
48. Extension.extension:testRun.extension:script.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
50. Extension.extension:testRun.extension:script.extension:language
Slice Name	language
Definition	R5: `TestPlan.testCase.testRun.script.language` (new:CodeableConcept)
Short	R5: The language for the test cases e.g. 'gherkin', 'testscript' (new)
Comments	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
52. Extension.extension:testRun.extension:script.extension:language.url
Control	1..1
Fixed Value	`language`
54. Extension.extension:testRun.extension:script.extension:language.value[x]
Definition	The language for the test cases e.g. 'gherkin', 'testscript'.
Short	The language for the test cases e.g. 'gherkin', 'testscript'
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
56. Extension.extension:testRun.extension:script.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testRun.script.source[x]` (new:Reference, string)
Short	R5: The actual content of the cases - references to TestScripts or externally defined content (new)
Comments	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
58. Extension.extension:testRun.extension:script.extension:source.url
Control	1..1
Fixed Value	`source`
60. Extension.extension:testRun.extension:script.extension:source.value[x]
Definition	The actual content of the cases - references to TestScripts or externally defined content.
Short	The actual content of the cases - references to TestScripts or externally defined content
Control	0..1
Type	Choice of: string, Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
62. Extension.extension:testRun.extension:script.url
Control	1..1
Fixed Value	`script`
64. Extension.extension:testRun.extension:script.value[x]
Control	0..0
66. Extension.extension:testRun.url
Control	1..1
Fixed Value	`testRun`
68. Extension.extension:testRun.value[x]
Control	0..0
70. Extension.extension:testData
Slice Name	testData
Definition	R5: `TestPlan.testCase.testData` (new:BackboneElement)
Short	R5: The test data used in the test case (new)
Comments	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
72. Extension.extension:testData.extension
Control	1..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
74. Extension.extension:testData.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.testData.type` (new:Coding)
Short	R5: The type of test data description, e.g. 'synthea' (new)
Comments	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
76. Extension.extension:testData.extension:type.url
Control	1..1
Fixed Value	`type`
78. Extension.extension:testData.extension:type.value[x]
Definition	The type of test data description, e.g. 'synthea'.
Short	The type of test data description, e.g. 'synthea'
Control	1..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
80. Extension.extension:testData.extension:content
Slice Name	content
Definition	R5: `TestPlan.testCase.testData.content` (new:Reference)
Short	R5: The actual test resources when they exist (new)
Comments	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
82. Extension.extension:testData.extension:content.url
Control	1..1
Fixed Value	`content`
84. Extension.extension:testData.extension:content.value[x]
Definition	The actual test resources when they exist.
Short	The actual test resources when they exist
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
86. Extension.extension:testData.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testData.source[x]` (new:Reference, string)
Short	R5: Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc (new)
Comments	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
88. Extension.extension:testData.extension:source.url
Control	1..1
Fixed Value	`source`
90. Extension.extension:testData.extension:source.value[x]
Definition	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc.
Short	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc
Control	0..1
Type	Choice of: string, Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
92. Extension.extension:testData.url
Control	1..1
Fixed Value	`testData`
94. Extension.extension:testData.value[x]
Control	0..0
96. Extension.extension:assertion
Slice Name	assertion
Definition	R5: `TestPlan.testCase.assertion` (new:BackboneElement)
Short	R5: Test assertions or expectations (new)
Comments	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
98. Extension.extension:assertion.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
100. Extension.extension:assertion.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.assertion.type` (new:CodeableConcept)
Short	R5: Assertion type - for example 'informative' or 'required' (new)
Comments	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
102. Extension.extension:assertion.extension:type.url
Control	1..1
Fixed Value	`type`
104. Extension.extension:assertion.extension:type.value[x]
Definition	The test assertion type - this can be used to group assertions as 'required' or 'optional', or can be used for other classification of the assertion.
Short	Assertion type - for example 'informative' or 'required'
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
106. Extension.extension:assertion.extension:object
Slice Name	object
Definition	R5: `TestPlan.testCase.assertion.object` (new:CodeableReference)
Short	R5: The focus or object of the assertion (new)
Comments	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
108. Extension.extension:assertion.extension:object.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
110. Extension.extension:assertion.extension:object.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
112. Extension.extension:assertion.extension:object.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
114. Extension.extension:assertion.extension:object.extension:_datatype.value[x]
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`CodeableReference`
116. Extension.extension:assertion.extension:object.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
118. Extension.extension:assertion.extension:object.extension:concept.url
Control	1..1
Fixed Value	`concept`
120. Extension.extension:assertion.extension:object.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
122. Extension.extension:assertion.extension:object.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
124. Extension.extension:assertion.extension:object.extension:reference.url
Control	1..1
Fixed Value	`reference`
126. Extension.extension:assertion.extension:object.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
128. Extension.extension:assertion.extension:object.url
Control	1..1
Fixed Value	`object`
130. Extension.extension:assertion.extension:object.value[x]
Control	0..0
132. Extension.extension:assertion.extension:result
Slice Name	result
Definition	R5: `TestPlan.testCase.assertion.result` (new:CodeableReference)
Short	R5: The actual result assertion (new)
Comments	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
134. Extension.extension:assertion.extension:result.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
136. Extension.extension:assertion.extension:result.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
138. Extension.extension:assertion.extension:result.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
140. Extension.extension:assertion.extension:result.extension:_datatype.value[x]
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`CodeableReference`
142. Extension.extension:assertion.extension:result.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
144. Extension.extension:assertion.extension:result.extension:concept.url
Control	1..1
Fixed Value	`concept`
146. Extension.extension:assertion.extension:result.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
148. Extension.extension:assertion.extension:result.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
150. Extension.extension:assertion.extension:result.extension:reference.url
Control	1..1
Fixed Value	`reference`
152. Extension.extension:assertion.extension:result.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
154. Extension.extension:assertion.extension:result.url
Control	1..1
Fixed Value	`result`
156. Extension.extension:assertion.extension:result.value[x]
Control	0..0
158. Extension.extension:assertion.url
Control	1..1
Fixed Value	`assertion`
160. Extension.extension:assertion.value[x]
Control	0..0
162. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-TestPlan.testCase`
164. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `TestPlan.testCase` (new:BackboneElement)
Short	R5: The test cases that constitute this plan (new)
Comments	Element `TestPlan.testCase` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:sequence
Slice Name	sequence
Definition	R5: `TestPlan.testCase.sequence` (new:integer)
Short	R5: Sequence of test case in the test plan (new)
Comments	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.sequence` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.sequence` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.sequence` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:sequence.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:sequence.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:sequence.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`sequence`
14. Extension.extension:sequence.value[x]
Definition	Sequence of test case - an ordinal number that indicates the order for the present test case in the test plan.
Short	Sequence of test case in the test plan
Control	0..1
Type	integer
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:scope
Slice Name	scope
Definition	R5: `TestPlan.testCase.scope` (new:Reference)
Short	R5: The scope or artifact covered by the case (new)
Comments	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.scope` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.scope` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.scope` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:scope.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:scope.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:scope.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`scope`
24. Extension.extension:scope.value[x]
Definition	The scope or artifact covered by the case, when the individual test case is associated with a testable artifact.
Short	The scope or artifact covered by the case
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:dependency
Slice Name	dependency
Definition	R5: `TestPlan.testCase.dependency` (new:BackboneElement)
Short	R5: Required criteria to execute the test case (new)
Comments	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.dependency` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:dependency.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:dependency.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:dependency.extension:description
Slice Name	description
Definition	R5: `TestPlan.testCase.dependency.description` (new:markdown)
Short	R5: Description of the criteria (new)
Comments	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency.description` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.description` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
34. Extension.extension:dependency.extension:description.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
36. Extension.extension:dependency.extension:description.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
38. Extension.extension:dependency.extension:description.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`description`
40. Extension.extension:dependency.extension:description.value[x]
Definition	Description of the criteria.
Short	Description of the criteria
Control	0..1
Type	markdown
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
42. Extension.extension:dependency.extension:predecessor
Slice Name	predecessor
Definition	R5: `TestPlan.testCase.dependency.predecessor` (new:Reference)
Short	R5: Link to predecessor test plans (new)
Comments	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.dependency.predecessor` is part of an existing definition because parent element `TestPlan.testCase.dependency` requires a cross-version extension. Element `TestPlan.testCase.dependency.predecessor` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.dependency.predecessor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Extension.extension:dependency.extension:predecessor.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
46. Extension.extension:dependency.extension:predecessor.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
48. Extension.extension:dependency.extension:predecessor.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`predecessor`
50. Extension.extension:dependency.extension:predecessor.value[x]
Definition	Link to predecessor test plans.
Short	Link to predecessor test plans
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
52. Extension.extension:dependency.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`dependency`
54. Extension.extension:dependency.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.extension:testRun
Slice Name	testRun
Definition	R5: `TestPlan.testCase.testRun` (new:BackboneElement)
Short	R5: The actual test to be executed (new)
Comments	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testRun` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Extension.extension:testRun.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
60. Extension.extension:testRun.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
62. Extension.extension:testRun.extension:narrative
Slice Name	narrative
Definition	R5: `TestPlan.testCase.testRun.narrative` (new:markdown)
Short	R5: The narrative description of the tests (new)
Comments	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.narrative` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.narrative` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.narrative` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
64. Extension.extension:testRun.extension:narrative.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
66. Extension.extension:testRun.extension:narrative.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
68. Extension.extension:testRun.extension:narrative.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`narrative`
70. Extension.extension:testRun.extension:narrative.value[x]
Definition	The narrative description of the tests.
Short	The narrative description of the tests
Control	0..1
Type	markdown
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
72. Extension.extension:testRun.extension:script
Slice Name	script
Definition	R5: `TestPlan.testCase.testRun.script` (new:BackboneElement)
Short	R5: The test cases in a structured language e.g. gherkin, Postman, or FHIR TestScript (new)
Comments	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script` is part of an existing definition because parent element `TestPlan.testCase.testRun` requires a cross-version extension. Element `TestPlan.testCase.testRun.script` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
74. Extension.extension:testRun.extension:script.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
76. Extension.extension:testRun.extension:script.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
78. Extension.extension:testRun.extension:script.extension:language
Slice Name	language
Definition	R5: `TestPlan.testCase.testRun.script.language` (new:CodeableConcept)
Short	R5: The language for the test cases e.g. 'gherkin', 'testscript' (new)
Comments	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script.language` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.language` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.language` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
80. Extension.extension:testRun.extension:script.extension:language.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
82. Extension.extension:testRun.extension:script.extension:language.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
84. Extension.extension:testRun.extension:script.extension:language.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`language`
86. Extension.extension:testRun.extension:script.extension:language.value[x]
Definition	The language for the test cases e.g. 'gherkin', 'testscript'.
Short	The language for the test cases e.g. 'gherkin', 'testscript'
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
88. Extension.extension:testRun.extension:script.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testRun.script.source[x]` (new:Reference, string)
Short	R5: The actual content of the cases - references to TestScripts or externally defined content (new)
Comments	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testRun.script.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testRun.script` requires a cross-version extension. Element `TestPlan.testCase.testRun.script.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testRun.script.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
90. Extension.extension:testRun.extension:script.extension:source.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
92. Extension.extension:testRun.extension:script.extension:source.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
94. Extension.extension:testRun.extension:script.extension:source.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`source`
96. Extension.extension:testRun.extension:script.extension:source.value[x]
Definition	The actual content of the cases - references to TestScripts or externally defined content.
Short	The actual content of the cases - references to TestScripts or externally defined content
Control	0..1
Type	Choice of: string, Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
98. Extension.extension:testRun.extension:script.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`script`
100. Extension.extension:testRun.extension:script.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
102. Extension.extension:testRun.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`testRun`
104. Extension.extension:testRun.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
106. Extension.extension:testData
Slice Name	testData
Definition	R5: `TestPlan.testCase.testData` (new:BackboneElement)
Short	R5: The test data used in the test case (new)
Comments	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.testData` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
108. Extension.extension:testData.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
110. Extension.extension:testData.extension
Definition	An Extension
Short	Extension
Control	1..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
112. Extension.extension:testData.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.testData.type` (new:Coding)
Short	R5: The type of test data description, e.g. 'synthea' (new)
Comments	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.type` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
114. Extension.extension:testData.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
116. Extension.extension:testData.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
118. Extension.extension:testData.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
120. Extension.extension:testData.extension:type.value[x]
Definition	The type of test data description, e.g. 'synthea'.
Short	The type of test data description, e.g. 'synthea'
Control	1..1
Type	Coding
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
122. Extension.extension:testData.extension:content
Slice Name	content
Definition	R5: `TestPlan.testCase.testData.content` (new:Reference)
Short	R5: The actual test resources when they exist (new)
Comments	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.content` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.content` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.content` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
124. Extension.extension:testData.extension:content.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
126. Extension.extension:testData.extension:content.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
128. Extension.extension:testData.extension:content.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`content`
130. Extension.extension:testData.extension:content.value[x]
Definition	The actual test resources when they exist.
Short	The actual test resources when they exist
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
132. Extension.extension:testData.extension:source
Slice Name	source
Definition	R5: `TestPlan.testCase.testData.source[x]` (new:Reference, string)
Short	R5: Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc (new)
Comments	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.testData.source[x]` is part of an existing definition because parent element `TestPlan.testCase.testData` requires a cross-version extension. Element `TestPlan.testCase.testData.source[x]` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.testData.source[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
134. Extension.extension:testData.extension:source.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
136. Extension.extension:testData.extension:source.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
138. Extension.extension:testData.extension:source.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`source`
140. Extension.extension:testData.extension:source.value[x]
Definition	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc.
Short	Pointer to a definition of test resources - narrative or structured e.g. synthetic data generation, etc
Control	0..1
Type	Choice of: string, Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
142. Extension.extension:testData.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`testData`
144. Extension.extension:testData.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
146. Extension.extension:assertion
Slice Name	assertion
Definition	R5: `TestPlan.testCase.assertion` (new:BackboneElement)
Short	R5: Test assertions or expectations (new)
Comments	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion` is part of an existing definition because parent element `TestPlan.testCase` requires a cross-version extension. Element `TestPlan.testCase.assertion` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
148. Extension.extension:assertion.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
150. Extension.extension:assertion.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
152. Extension.extension:assertion.extension:type
Slice Name	type
Definition	R5: `TestPlan.testCase.assertion.type` (new:CodeableConcept)
Short	R5: Assertion type - for example 'informative' or 'required' (new)
Comments	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.type` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.type` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
154. Extension.extension:assertion.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
156. Extension.extension:assertion.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
158. Extension.extension:assertion.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
160. Extension.extension:assertion.extension:type.value[x]
Definition	The test assertion type - this can be used to group assertions as 'required' or 'optional', or can be used for other classification of the assertion.
Short	Assertion type - for example 'informative' or 'required'
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
162. Extension.extension:assertion.extension:object
Slice Name	object
Definition	R5: `TestPlan.testCase.assertion.object` (new:CodeableReference)
Short	R5: The focus or object of the assertion (new)
Comments	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.object` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.object` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.object` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
164. Extension.extension:assertion.extension:object.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
166. Extension.extension:assertion.extension:object.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
168. Extension.extension:assertion.extension:object.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
170. Extension.extension:assertion.extension:object.extension:_datatype.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
172. Extension.extension:assertion.extension:object.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
174. Extension.extension:assertion.extension:object.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
176. Extension.extension:assertion.extension:object.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`CodeableReference`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
178. Extension.extension:assertion.extension:object.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
180. Extension.extension:assertion.extension:object.extension:concept.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
182. Extension.extension:assertion.extension:object.extension:concept.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
184. Extension.extension:assertion.extension:object.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`concept`
186. Extension.extension:assertion.extension:object.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
188. Extension.extension:assertion.extension:object.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
190. Extension.extension:assertion.extension:object.extension:reference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
192. Extension.extension:assertion.extension:object.extension:reference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
194. Extension.extension:assertion.extension:object.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reference`
196. Extension.extension:assertion.extension:object.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
198. Extension.extension:assertion.extension:object.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`object`
200. Extension.extension:assertion.extension:object.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
202. Extension.extension:assertion.extension:result
Slice Name	result
Definition	R5: `TestPlan.testCase.assertion.result` (new:CodeableReference)
Short	R5: The actual result assertion (new)
Comments	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `TestPlan.testCase.assertion.result` is part of an existing definition because parent element `TestPlan.testCase.assertion` requires a cross-version extension. Element `TestPlan.testCase.assertion.result` is not mapped to FHIR R4, since FHIR R5 `TestPlan` is not mapped. Element `TestPlan.testCase.assertion.result` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
204. Extension.extension:assertion.extension:result.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
206. Extension.extension:assertion.extension:result.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
208. Extension.extension:assertion.extension:result.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR R4
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
210. Extension.extension:assertion.extension:result.extension:_datatype.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
212. Extension.extension:assertion.extension:result.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
214. Extension.extension:assertion.extension:result.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
216. Extension.extension:assertion.extension:result.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`CodeableReference`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
218. Extension.extension:assertion.extension:result.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.concept` is mapped to FHIR R4 element `CodeableConcept` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
220. Extension.extension:assertion.extension:result.extension:concept.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
222. Extension.extension:assertion.extension:result.extension:concept.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
224. Extension.extension:assertion.extension:result.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`concept`
226. Extension.extension:assertion.extension:result.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
228. Extension.extension:assertion.extension:result.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `CodeableReference.reference` is mapped to FHIR R4 element `Reference` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
230. Extension.extension:assertion.extension:result.extension:reference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
232. Extension.extension:assertion.extension:result.extension:reference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
234. Extension.extension:assertion.extension:result.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`reference`
236. Extension.extension:assertion.extension:result.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
238. Extension.extension:assertion.extension:result.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`result`
240. Extension.extension:assertion.extension:result.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
242. Extension.extension:assertion.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`assertion`
244. Extension.extension:assertion.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
246. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-TestPlan.testCase`
248. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)