Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the ext-R5-SubstanceProtein.subunit extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: Optional Extension Element - found in all resources. |
| Short | R5: This subclause refers to the description of each subunit constituting the SubstanceProtein. A subunit is a linear sequence of amino acids linked through peptide bonds. The Subunit information shall be provided when the finished SubstanceProtein is a complex of multiple sequences; subunits are not used to delineate domains within a single sequence. Subunits are listed in order of decreasing length; sequences of the same length will be ordered by decreasing molecular weight; subunits that have identical sequences will be repeated multiple times (new)Optional Extensions Element |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:subunit | |
| Slice Name | subunit |
| Definition | R5: |
| Short | R5: Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:subunit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | subunit |
| 8. Extension.extension:subunit.value[x] | |
| Definition | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscriptsValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 14. Extension.extension:sequence.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequenceValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:length | |
| Slice Name | length |
| Definition | R5: |
| Short | R5: Length of linear sequences of amino acids contained in the subunit (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 18. Extension.extension:length.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | length |
| 20. Extension.extension:length.value[x] | |
| Definition | Length of linear sequences of amino acids contained in the subunit. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Length of linear sequences of amino acids contained in the subunitValue of extension |
| Control | 0..1 |
| Type | integer, date, Meta, Address, Attachment, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Extension.extension:sequenceAttachment | |
| Slice Name | sequenceAttachment |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 24. Extension.extension:sequenceAttachment.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequenceAttachment |
| 26. Extension.extension:sequenceAttachment.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequenceValue of extension |
| Control | 0..1 |
| Type | Attachment, date, Meta, Address, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:nTerminalModificationId | |
| Slice Name | nTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:nTerminalModificationId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | nTerminalModificationId |
| 32. Extension.extension:nTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance IDValue of extension |
| Control | 0..1 |
| Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:nTerminalModification | |
| Slice Name | nTerminalModification |
| Definition | R5: |
| Short | R5: The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 36. Extension.extension:nTerminalModification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | nTerminalModification |
| 38. Extension.extension:nTerminalModification.value[x] | |
| Definition | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specifiedValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Extension.extension:cTerminalModificationId | |
| Slice Name | cTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 42. Extension.extension:cTerminalModificationId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | cTerminalModificationId |
| 44. Extension.extension:cTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance IDValue of extension |
| Control | 0..1 |
| Type | Identifier, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:cTerminalModification | |
| Slice Name | cTerminalModification |
| Definition | R5: |
| Short | R5: The modification at the C-terminal shall be specified (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 48. Extension.extension:cTerminalModification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | cTerminalModification |
| 50. Extension.extension:cTerminalModification.value[x] | |
| Definition | The modification at the C-terminal shall be specified. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The modification at the C-terminal shall be specifiedValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceProtein.subunit |
| 54. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: This subclause refers to the description of each subunit constituting the SubstanceProtein. A subunit is a linear sequence of amino acids linked through peptide bonds. The Subunit information shall be provided when the finished SubstanceProtein is a complex of multiple sequences; subunits are not used to delineate domains within a single sequence. Subunits are listed in order of decreasing length; sequences of the same length will be ordered by decreasing molecular weight; subunits that have identical sequences will be repeated multiple times (new) |
| Comments | Element |
| Control | 0..* |
| Is Modifier | false |
| 2. Extension.extension | |
| Control | 0..* |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:subunit | |
| Slice Name | subunit |
| Definition | R5: |
| Short | R5: Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 6. Extension.extension:subunit.url | |
| Control | 1..1 |
| Fixed Value | subunit |
| 8. Extension.extension:subunit.value[x] | |
| Definition | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts. |
| Short | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 12. Extension.extension:sequence.url | |
| Control | 1..1 |
| Fixed Value | sequence |
| 14. Extension.extension:sequence.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 16. Extension.extension:length | |
| Slice Name | length |
| Definition | R5: |
| Short | R5: Length of linear sequences of amino acids contained in the subunit (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 18. Extension.extension:length.url | |
| Control | 1..1 |
| Fixed Value | length |
| 20. Extension.extension:length.value[x] | |
| Definition | Length of linear sequences of amino acids contained in the subunit. |
| Short | Length of linear sequences of amino acids contained in the subunit |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 22. Extension.extension:sequenceAttachment | |
| Slice Name | sequenceAttachment |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 24. Extension.extension:sequenceAttachment.url | |
| Control | 1..1 |
| Fixed Value | sequenceAttachment |
| 26. Extension.extension:sequenceAttachment.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence |
| Control | 0..1 |
| Type | Attachment |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 28. Extension.extension:nTerminalModificationId | |
| Slice Name | nTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 30. Extension.extension:nTerminalModificationId.url | |
| Control | 1..1 |
| Fixed Value | nTerminalModificationId |
| 32. Extension.extension:nTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID |
| Control | 0..1 |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 34. Extension.extension:nTerminalModification | |
| Slice Name | nTerminalModification |
| Definition | R5: |
| Short | R5: The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 36. Extension.extension:nTerminalModification.url | |
| Control | 1..1 |
| Fixed Value | nTerminalModification |
| 38. Extension.extension:nTerminalModification.value[x] | |
| Definition | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified. |
| Short | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 40. Extension.extension:cTerminalModificationId | |
| Slice Name | cTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 42. Extension.extension:cTerminalModificationId.url | |
| Control | 1..1 |
| Fixed Value | cTerminalModificationId |
| 44. Extension.extension:cTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID |
| Control | 0..1 |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 46. Extension.extension:cTerminalModification | |
| Slice Name | cTerminalModification |
| Definition | R5: |
| Short | R5: The modification at the C-terminal shall be specified (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 48. Extension.extension:cTerminalModification.url | |
| Control | 1..1 |
| Fixed Value | cTerminalModification |
| 50. Extension.extension:cTerminalModification.value[x] | |
| Definition | The modification at the C-terminal shall be specified. |
| Short | The modification at the C-terminal shall be specified |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 52. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceProtein.subunit |
| 54. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: This subclause refers to the description of each subunit constituting the SubstanceProtein. A subunit is a linear sequence of amino acids linked through peptide bonds. The Subunit information shall be provided when the finished SubstanceProtein is a complex of multiple sequences; subunits are not used to delineate domains within a single sequence. Subunits are listed in order of decreasing length; sequences of the same length will be ordered by decreasing molecular weight; subunits that have identical sequences will be repeated multiple times (new) |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:subunit | |
| Slice Name | subunit |
| Definition | R5: |
| Short | R5: Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:subunit.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:subunit.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:subunit.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | subunit |
| 14. Extension.extension:subunit.value[x] | |
| Definition | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts. |
| Short | Index of primary sequences of amino acids linked through peptide bonds in order of decreasing length. Sequences of the same length will be ordered by molecular weight. Subunits that have identical sequences will be repeated and have sequential subscripts |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:sequence | |
| Slice Name | sequence |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:sequence.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:sequence.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:sequence.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequence |
| 24. Extension.extension:sequence.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:length | |
| Slice Name | length |
| Definition | R5: |
| Short | R5: Length of linear sequences of amino acids contained in the subunit (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:length.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:length.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:length.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | length |
| 34. Extension.extension:length.value[x] | |
| Definition | Length of linear sequences of amino acids contained in the subunit. |
| Short | Length of linear sequences of amino acids contained in the subunit |
| Control | 0..1 |
| Type | integer |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:sequenceAttachment | |
| Slice Name | sequenceAttachment |
| Definition | R5: |
| Short | R5: The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:sequenceAttachment.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:sequenceAttachment.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:sequenceAttachment.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | sequenceAttachment |
| 44. Extension.extension:sequenceAttachment.value[x] | |
| Definition | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence. |
| Short | The sequence information shall be provided enumerating the amino acids from N- to C-terminal end using standard single-letter amino acid codes. Uppercase shall be used for L-amino acids and lowercase for D-amino acids. Transcribed SubstanceProteins will always be described using the translated sequence; for synthetic peptide containing amino acids that are not represented with a single letter code an X should be used within the sequence. The modified amino acids will be distinguished by their position in the sequence |
| Control | 0..1 |
| Type | Attachment |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:nTerminalModificationId | |
| Slice Name | nTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 48. Extension.extension:nTerminalModificationId.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:nTerminalModificationId.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:nTerminalModificationId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | nTerminalModificationId |
| 54. Extension.extension:nTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID |
| Control | 0..1 |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:nTerminalModification | |
| Slice Name | nTerminalModification |
| Definition | R5: |
| Short | R5: The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 58. Extension.extension:nTerminalModification.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:nTerminalModification.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:nTerminalModification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | nTerminalModification |
| 64. Extension.extension:nTerminalModification.value[x] | |
| Definition | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified. |
| Short | The name of the fragment modified at the N-terminal of the SubstanceProtein shall be specified |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:cTerminalModificationId | |
| Slice Name | cTerminalModificationId |
| Definition | R5: |
| Short | R5: Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 68. Extension.extension:cTerminalModificationId.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 70. Extension.extension:cTerminalModificationId.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 72. Extension.extension:cTerminalModificationId.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | cTerminalModificationId |
| 74. Extension.extension:cTerminalModificationId.value[x] | |
| Definition | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID. |
| Short | Unique identifier for molecular fragment modification based on the ISO 11238 Substance ID |
| Control | 0..1 |
| Type | Identifier |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:cTerminalModification | |
| Slice Name | cTerminalModification |
| Definition | R5: |
| Short | R5: The modification at the C-terminal shall be specified (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 78. Extension.extension:cTerminalModification.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 80. Extension.extension:cTerminalModification.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 82. Extension.extension:cTerminalModification.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | cTerminalModification |
| 84. Extension.extension:cTerminalModification.value[x] | |
| Definition | The modification at the C-terminal shall be specified. |
| Short | The modification at the C-terminal shall be specified |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstanceProtein.subunit |
| 88. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r5.r4#0.1.0 based on FHIR 4.0.1. Generated 2026-03-20
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change