Generated Narrative: StructureDefinition ext-R5-SubstancePolymer.repeat Name Flags Card. Type Description & Constraints Extension 0..* Extension(4.0.1) R5: Specifies and quantifies the repeated units and their configuration (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:averageMolecularFormula 0..1 Extension R5: A representation of an (average) molecular formula from a polymer (new) #xD; url 1..1 uri "averageMolecularFormula" #xD; value[x] 0..1 string A representation of an (average) molecular formula from a polymer #xD; extension:repeatUnitAmountType 0..1 Extension R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new) #xD; url 1..1 uri "repeatUnitAmountType" #xD; value[x] 0..1 CodeableConcept How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) #xD; extension:repeatUnit 0..* Extension R5: An SRU - Structural Repeat Unit (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:unit 0..1 Extension R5: Structural repeat units are essential elements for defining polymers (new) #xD; url 1..1 uri "unit" #xD; value[x] 0..1 string Structural repeat units are essential elements for defining polymers #xD; extension:orientation 0..1 Extension R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new) #xD; url 1..1 uri "orientation" #xD; value[x] 0..1 CodeableConcept The orientation of the polymerisation, e.g. head-tail, head-head, random #xD; extension:amount 0..1 Extension R5: Number of repeats of this unit (new) #xD; url 1..1 uri "amount" #xD; value[x] 0..1 integer Number of repeats of this unit #xD; extension:degreeOfPolymerisation 0..* Extension R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:type 0..1 Extension R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new) #xD; url 1..1 uri "type" #xD; value[x] 0..1 CodeableConcept The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio #xD; extension:average 0..1 Extension R5: An average amount of polymerisation (new) #xD; url 1..1 uri "average" #xD; value[x] 0..1 integer An average amount of polymerisation #xD; extension:low 0..1 Extension R5: A low expected limit of the amount (new) #xD; url 1..1 uri "low" #xD; value[x] 0..1 integer A low expected limit of the amount #xD; extension:high 0..1 Extension R5: A high expected limit of the amount (new) #xD; url 1..1 uri "high" #xD; value[x] 0..1 integer A high expected limit of the amount #xD; url 1..1 uri "degreeOfPolymerisation" #xD; value[x] 0..0 Value of extension #xD; extension:structuralRepresentation 0..* Extension R5: A graphical structure for this SRU (new) #xD; Slices for extension 0..* Extension Extension Slice: Unordered, Open by value:url #xD; extension:type 0..1 Extension R5: The type of structure (e.g. Full, Partial, Representative) (new) #xD; url 1..1 uri "type" #xD; value[x] 0..1 CodeableConcept The type of structure (e.g. Full, Partial, Representative) #xD; extension:representation 0..1 Extension R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) #xD; url 1..1 uri "representation" #xD; value[x] 0..1 string The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF #xD; extension:format 0..1 Extension R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new) #xD; url 1..1 uri "format" #xD; value[x] 0..1 CodeableConcept The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF #xD; extension:attachment 0..1 Extension R5: An attached file with the structural representation (new) #xD; url 1..1 uri "attachment" #xD; value[x] 0..1 Attachment An attached file with the structural representation #xD; url 1..1 uri "structuralRepresentation" #xD; value[x] 0..0 Value of extension #xD; url 1..1 uri "repeatUnit" #xD; value[x] 0..0 Value of extension #xD; url 1..1 uri "http://hl7.org/fhir/5.0/StructureDefinition/extension-SubstancePolymer.repeat" #xD; value[x] 0..0 Value of extension #xD; Documentation for this format
R5: Specifies and quantifies the repeated units and their configuration (new)
R5: `SubstancePolymer.repeat` (new:BackboneElement)
This extension is part of the cross-version definitions generated to enable use of the element `SubstancePolymer.repeat` as defined in FHIR R5 in FHIR R4. The source element is defined as: `SubstancePolymer.repeat` 0..* `BackboneElement` Across FHIR versions, the element set has been mapped as: * R5 `SubstancePolymer.repeat` 0..* `BackboneElement` Following are the generation technical comments: Element `SubstancePolymer.repeat` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `SubstancePolymer.repeat` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
All FHIR elements must have a @value or children
hasValue() or (children().count() > id.count())
Must have either extensions or value[x], not both
exists(f:extension)!=exists(f:*[starts-with(local-name(.), 'value')])
Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Extensions are always sliced by (at least) url
exists(f:extension)!=exists(f:*[starts-with(local-name(.), "value")])
R5: A representation of an (average) molecular formula from a polymer (new)
R5: `SubstancePolymer.repeat.averageMolecularFormula` (new:string)
Element `SubstancePolymer.repeat.averageMolecularFormula` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.averageMolecularFormula` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.averageMolecularFormula` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Additional content defined by implementations
May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Source of the definition for the extension code - a logical name or a URL.
The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
A representation of an (average) molecular formula from a polymer
A representation of an (average) molecular formula from a polymer.
R5: How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average) (new)
R5: `SubstancePolymer.repeat.repeatUnitAmountType` (new:CodeableConcept)
Element `SubstancePolymer.repeat.repeatUnitAmountType` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnitAmountType` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnitAmountType` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average)
How the quantitative amount of Structural Repeat Units is captured (e.g. Exact, Numeric, Average).
R5: An SRU - Structural Repeat Unit (new)
R5: `SubstancePolymer.repeat.repeatUnit` (new:BackboneElement)
Element `SubstancePolymer.repeat.repeatUnit` is part of an existing definition because parent element `SubstancePolymer.repeat` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: Structural repeat units are essential elements for defining polymers (new)
R5: `SubstancePolymer.repeat.repeatUnit.unit` (new:string)
Element `SubstancePolymer.repeat.repeatUnit.unit` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.unit` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.unit` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Structural repeat units are essential elements for defining polymers
Structural repeat units are essential elements for defining polymers.
R5: The orientation of the polymerisation, e.g. head-tail, head-head, random (new)
R5: `SubstancePolymer.repeat.repeatUnit.orientation` (new:CodeableConcept)
Element `SubstancePolymer.repeat.repeatUnit.orientation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.orientation` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.orientation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
The orientation of the polymerisation, e.g. head-tail, head-head, random
The orientation of the polymerisation, e.g. head-tail, head-head, random.
R5: Number of repeats of this unit (new)
R5: `SubstancePolymer.repeat.repeatUnit.amount` (new:integer)
Element `SubstancePolymer.repeat.repeatUnit.amount` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.amount` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: Applies to homopolymer and block co-polymers where the degree of polymerisation within a block can be described (new)
R5: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` (new:BackboneElement)
Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio (new)
R5: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type` (new:CodeableConcept)
Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio
The type of the degree of polymerisation shall be described, e.g. SRU/Polymer Ratio.
R5: An average amount of polymerisation (new)
R5: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average` (new:integer)
Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.average` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: A low expected limit of the amount (new)
R5: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low` (new:integer)
Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.low` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: A high expected limit of the amount (new)
R5: `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high` (new:integer)
Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.degreeOfPolymerisation.high` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Value of extension - must be one of a constrained set of the data types (see [Extensibility](http://hl7.org/fhir/R4/extensibility.html) for a list).
R5: A graphical structure for this SRU (new)
R5: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` (new:BackboneElement)
Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
R5: The type of structure (e.g. Full, Partial, Representative) (new)
R5: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` (new:CodeableConcept)
Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
The type of structure (e.g. Full, Partial, Representative)
The type of structure (e.g. Full, Partial, Representative).
R5: The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
R5: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` (new:string)
Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.representation` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
The structural representation as text string in a standard format e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF.
R5: The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF (new)
R5: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format` (new:CodeableConcept)
Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.format` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF
The format of the representation e.g. InChI, SMILES, MOLFILE, CDX, SDF, PDB, mmCIF.
R5: An attached file with the structural representation (new)
R5: `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` (new:Attachment)
Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is part of an existing definition because parent element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation` requires a cross-version extension. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` is not mapped to FHIR R4, since FHIR R5 `SubstancePolymer` is not mapped. Element `SubstancePolymer.repeat.repeatUnit.structuralRepresentation.attachment` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
An attached file with the structural representation
An attached file with the structural representation.