ExtensionEvidenceReport_Section - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR R4 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions

Extension: ExtensionEvidenceReport_Section - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-EvidenceReport.section extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `EvidenceReport.section` (new:BackboneElement) Optional Extension Element - found in all resources.
Short	R5: Composition is broken into sections (new)Optional Extensions Element
Comments	Element `EvidenceReport.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:title
Slice Name	title
Definition	R5: `EvidenceReport.section.title` (new:string)
Short	R5: Label for section (e.g. for ToC) (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized. Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:title.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`title`
8. Extension.extension:title.value[x]
Definition	The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Label for section (e.g. for ToC)Value of extension
Comments	The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:focus
Slice Name	focus
Definition	R5: `EvidenceReport.section.focus` (new:CodeableConcept)
Short	R5: Classification of section (recommended) (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Provides computable standardized labels to sections within the document. Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:focus.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`focus`
14. Extension.extension:focus.value[x]
Definition	A code identifying the kind of content contained within the section. This should be consistent with the section title. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Classification of section (recommended)Value of extension
Comments	The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from For codes, see R5EvidenceReportSectionForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-report-section-for-R4\|0.1.0`) Evidence Report Section Type.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:focusReference
Slice Name	focusReference
Definition	R5: `EvidenceReport.section.focusReference` (new:Reference(Resource))
Short	R5: Classification of section by Resource (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:focusReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`focusReference`
20. Extension.extension:focusReference.value[x]
Definition	A definitional Resource identifying the kind of content contained within the section. This should be consistent with the section title. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Classification of section by ResourceValue of extension
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Extension.extension:author
Slice Name	author
Definition	R5: `EvidenceReport.section.author` (new:Reference(Patient,Practitioner,PractitionerRole,RelatedPerson,Device,Group,Organization))
Short	R5: Who and/or what authored the section (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Identifies who is responsible for the content. Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Extension.extension:author.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`author`
26. Extension.extension:author.value[x]
Definition	Identifies who is responsible for the information in this section, not necessarily who typed it in. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Who and/or what authored the sectionValue of extension
Control	0..1
Type	Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.Group for use in FHIR R4, Group, Cross-version Profile for R5.Organization for use in FHIR R4, Organization), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:text
Slice Name	text
Definition	R5: `EvidenceReport.section.text` (new:Narrative)
Short	R5: Text summary of the section, for human interpretation (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Document profiles may define what content should be represented in the narrative.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:text.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:text.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `Narrative` in FHIR R4
Short	DataType slice for a FHIR R5 `Narrative` valueAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
34. Extension.extension:text.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
36. Extension.extension:text.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: Narrative
Control	10..1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`Narrative`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
38. Extension.extension:text.extension:status
Slice Name	status
Definition	R5: `Narrative.status`
Short	R5: statusAdditional content defined by implementations
Comments	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
40. Extension.extension:text.extension:status.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`status`
42. Extension.extension:text.extension:status.value[x]
Definition	The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	generated \| extensions \| additional \| emptyValue of extension
Control	10..1
Binding	The codes SHALL be taken from For codes, see NarrativeStatus (required to `http://hl7.org/fhir/ValueSet/narrative-status\|4.0.1`) The status of a resource narrative.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
44. Extension.extension:text.extension:div
Slice Name	div
Definition	R5: `Narrative.div`
Short	R5: divAdditional content defined by implementations
Comments	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`. The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
46. Extension.extension:text.extension:div.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`div`
48. Extension.extension:text.extension:div.value[x]
Definition	The actual narrative content, a stripped down version of XHTML. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Limited xhtml contentValue of extension
Comments	The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	10..1
Type	uri, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
50. Extension.extension:text.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`text`
52. Extension.extension:text.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
54. Extension.extension:mode
Slice Name	mode
Definition	R5: `EvidenceReport.section.mode` (new:code)
Short	R5: working \| snapshot \| changes (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Sections are used in various ways, and it must be known in what way it is safe to use the entries in them. Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
56. Extension.extension:mode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`mode`
58. Extension.extension:mode.value[x]
Definition	How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	working \| snapshot \| changesValue of extension
Comments	This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1
Binding	The codes SHALL be taken from For codes, see ListMode (required to `http://hl7.org/fhir/ValueSet/list-mode\|4.0.1`) The processing mode that applies to this section.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
60. Extension.extension:orderedBy
Slice Name	orderedBy
Definition	R5: `EvidenceReport.section.orderedBy` (new:CodeableConcept)
Short	R5: Order of section entries (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
62. Extension.extension:orderedBy.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`orderedBy`
64. Extension.extension:orderedBy.value[x]
Definition	Specifies the order applied to the items in the section entries. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Order of section entriesValue of extension
Comments	Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1
Binding	The codes SHOULD be taken from For codes, see ListOrderCodes (preferred to `http://hl7.org/fhir/ValueSet/list-order\|4.0.1`) What order applies to the items in the entry.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
66. Extension.extension:entryClassifier
Slice Name	entryClassifier
Definition	R5: `EvidenceReport.section.entryClassifier` (new:CodeableConcept)
Short	R5: Extensible classifiers as content (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	May be used in searching and filtering, or may be the key content of the report. Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
68. Extension.extension:entryClassifier.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryClassifier`
70. Extension.extension:entryClassifier.value[x]
Definition	Specifies any type of classification of the evidence report. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Extensible classifiers as contentValue of extension
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from For codes, see R5EvidenceClassifierCodeForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-classifier-code-for-R4\|0.1.0`) Commonly used classifiers for evidence sets.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
72. Extension.extension:entryReference
Slice Name	entryReference
Definition	R5: `EvidenceReport.section.entryReference` (new:Reference(Resource))
Short	R5: Reference to resources as content (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
74. Extension.extension:entryReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryReference`
76. Extension.extension:entryReference.value[x]
Definition	A reference to the actual resource from which the narrative in the section is derived. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Reference to resources as contentValue of extension
Comments	If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
78. Extension.extension:entryQuantity
Slice Name	entryQuantity
Definition	R5: `EvidenceReport.section.entryQuantity` (new:Quantity)
Short	R5: Quantity as content (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
80. Extension.extension:entryQuantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryQuantity`
82. Extension.extension:entryQuantity.value[x]
Definition	Quantity as content. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Quantity as contentValue of extension
Control	0..1
Type	Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
84. Extension.extension:emptyReason
Slice Name	emptyReason
Definition	R5: `EvidenceReport.section.emptyReason` (new:CodeableConcept)
Short	R5: Why the section is empty (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows capturing things like "none exist" or "not asked" which can be important for most lists. Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
86. Extension.extension:emptyReason.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`emptyReason`
88. Extension.extension:emptyReason.value[x]
Definition	If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Why the section is emptyValue of extension
Comments	The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1
Binding	The codes SHOULD be taken from For codes, see ListEmptyReasons (preferred to `http://hl7.org/fhir/ValueSet/list-empty-reason\|4.0.1`) If a section is empty, why it is empty.
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
90. Extension.extension:section
Slice Name	section
Definition	R5: `EvidenceReport.section.section` (new:EvidenceReport.section)
Short	R5: Nested Section (new)Additional content defined by implementations
Comments	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
92. Extension.extension:section.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
94. Extension.extension:section.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
96. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
98. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `EvidenceReport.section` (new:BackboneElement)
Short	R5: Composition is broken into sections (new)
Comments	Element `EvidenceReport.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:title
Slice Name	title
Definition	R5: `EvidenceReport.section.title` (new:string)
Short	R5: Label for section (e.g. for ToC) (new)
Comments	Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1
Requirements	Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized. Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
6. Extension.extension:title.url
Control	1..1
Fixed Value	`title`
8. Extension.extension:title.value[x]
Definition	The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.
Short	Label for section (e.g. for ToC)
Comments	The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
10. Extension.extension:focus
Slice Name	focus
Definition	R5: `EvidenceReport.section.focus` (new:CodeableConcept)
Short	R5: Classification of section (recommended) (new)
Comments	Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1
Requirements	Provides computable standardized labels to sections within the document. Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
12. Extension.extension:focus.url
Control	1..1
Fixed Value	`focus`
14. Extension.extension:focus.value[x]
Definition	A code identifying the kind of content contained within the section. This should be consistent with the section title.
Short	Classification of section (recommended)
Comments	The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5EvidenceReportSectionForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-report-section-for-R4\|0.1.0`) Evidence Report Section Type.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:focusReference
Slice Name	focusReference
Definition	R5: `EvidenceReport.section.focusReference` (new:Reference(Resource))
Short	R5: Classification of section by Resource (new)
Comments	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
18. Extension.extension:focusReference.url
Control	1..1
Fixed Value	`focusReference`
20. Extension.extension:focusReference.value[x]
Definition	A definitional Resource identifying the kind of content contained within the section. This should be consistent with the section title.
Short	Classification of section by Resource
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:author
Slice Name	author
Definition	R5: `EvidenceReport.section.author` (new:Reference(Patient,Practitioner,PractitionerRole,RelatedPerson,Device,Group,Organization))
Short	R5: Who and/or what authored the section (new)
Comments	Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Identifies who is responsible for the content. Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
24. Extension.extension:author.url
Control	1..1
Fixed Value	`author`
26. Extension.extension:author.value[x]
Definition	Identifies who is responsible for the information in this section, not necessarily who typed it in.
Short	Who and/or what authored the section
Control	0..1
Type	Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.Group for use in FHIR R4, Group, Cross-version Profile for R5.Organization for use in FHIR R4, Organization)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
28. Extension.extension:text
Slice Name	text
Definition	R5: `EvidenceReport.section.text` (new:Narrative)
Short	R5: Text summary of the section, for human interpretation (new)
Comments	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Document profiles may define what content should be represented in the narrative.
Control	0..1
Requirements	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
30. Extension.extension:text.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:text.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `Narrative` in FHIR R4
Short	DataType slice for a FHIR R5 `Narrative` value
Control	1..1
34. Extension.extension:text.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
36. Extension.extension:text.extension:_datatype.value[x]
Comments	Must be: Narrative
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`Narrative`
38. Extension.extension:text.extension:status
Slice Name	status
Definition	R5: `Narrative.status`
Short	R5: status
Comments	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
Control	1..1
Requirements	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
40. Extension.extension:text.extension:status.url
Control	1..1
Fixed Value	`status`
42. Extension.extension:text.extension:status.value[x]
Definition	The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.
Short	generated \| extensions \| additional \| empty
Control	1..1
Binding	The codes SHALL be taken from NarrativeStatus (required to `http://hl7.org/fhir/ValueSet/narrative-status\|4.0.1`) The status of a resource narrative.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
44. Extension.extension:text.extension:div
Slice Name	div
Definition	R5: `Narrative.div`
Short	R5: div
Comments	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`. The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	1..1
Requirements	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`.
46. Extension.extension:text.extension:div.url
Control	1..1
Fixed Value	`div`
48. Extension.extension:text.extension:div.value[x]
Definition	The actual narrative content, a stripped down version of XHTML.
Short	Limited xhtml content
Comments	The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	1..1
Type	uri
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
50. Extension.extension:text.url
Control	1..1
Fixed Value	`text`
52. Extension.extension:text.value[x]
Control	0..0
54. Extension.extension:mode
Slice Name	mode
Definition	R5: `EvidenceReport.section.mode` (new:code)
Short	R5: working \| snapshot \| changes (new)
Comments	Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1
Requirements	Sections are used in various ways, and it must be known in what way it is safe to use the entries in them. Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
56. Extension.extension:mode.url
Control	1..1
Fixed Value	`mode`
58. Extension.extension:mode.value[x]
Definition	How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.
Short	working \| snapshot \| changes
Comments	This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1
Binding	The codes SHALL be taken from ListMode (required to `http://hl7.org/fhir/ValueSet/list-mode\|4.0.1`) The processing mode that applies to this section.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
60. Extension.extension:orderedBy
Slice Name	orderedBy
Definition	R5: `EvidenceReport.section.orderedBy` (new:CodeableConcept)
Short	R5: Order of section entries (new)
Comments	Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1
Requirements	Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
62. Extension.extension:orderedBy.url
Control	1..1
Fixed Value	`orderedBy`
64. Extension.extension:orderedBy.value[x]
Definition	Specifies the order applied to the items in the section entries.
Short	Order of section entries
Comments	Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1
Binding	The codes SHOULD be taken from ListOrderCodes (preferred to `http://hl7.org/fhir/ValueSet/list-order\|4.0.1`) What order applies to the items in the entry.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
66. Extension.extension:entryClassifier
Slice Name	entryClassifier
Definition	R5: `EvidenceReport.section.entryClassifier` (new:CodeableConcept)
Short	R5: Extensible classifiers as content (new)
Comments	Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	May be used in searching and filtering, or may be the key content of the report. Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
68. Extension.extension:entryClassifier.url
Control	1..1
Fixed Value	`entryClassifier`
70. Extension.extension:entryClassifier.value[x]
Definition	Specifies any type of classification of the evidence report.
Short	Extensible classifiers as content
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5EvidenceClassifierCodeForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-classifier-code-for-R4\|0.1.0`) Commonly used classifiers for evidence sets.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
72. Extension.extension:entryReference
Slice Name	entryReference
Definition	R5: `EvidenceReport.section.entryReference` (new:Reference(Resource))
Short	R5: Reference to resources as content (new)
Comments	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..*
Requirements	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
74. Extension.extension:entryReference.url
Control	1..1
Fixed Value	`entryReference`
76. Extension.extension:entryReference.value[x]
Definition	A reference to the actual resource from which the narrative in the section is derived.
Short	Reference to resources as content
Comments	If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
78. Extension.extension:entryQuantity
Slice Name	entryQuantity
Definition	R5: `EvidenceReport.section.entryQuantity` (new:Quantity)
Short	R5: Quantity as content (new)
Comments	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Requirements	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
80. Extension.extension:entryQuantity.url
Control	1..1
Fixed Value	`entryQuantity`
82. Extension.extension:entryQuantity.value[x]
Definition	Quantity as content.
Short	Quantity as content
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
84. Extension.extension:emptyReason
Slice Name	emptyReason
Definition	R5: `EvidenceReport.section.emptyReason` (new:CodeableConcept)
Short	R5: Why the section is empty (new)
Comments	Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1
Requirements	Allows capturing things like "none exist" or "not asked" which can be important for most lists. Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
86. Extension.extension:emptyReason.url
Control	1..1
Fixed Value	`emptyReason`
88. Extension.extension:emptyReason.value[x]
Definition	If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.
Short	Why the section is empty
Comments	The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1
Binding	The codes SHOULD be taken from ListEmptyReasons (preferred to `http://hl7.org/fhir/ValueSet/list-empty-reason\|4.0.1`) If a section is empty, why it is empty.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
90. Extension.extension:section
Slice Name	section
Definition	R5: `EvidenceReport.section.section` (new:EvidenceReport.section)
Short	R5: Nested Section (new)
Comments	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.
Control	0..*
Requirements	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
92. Extension.extension:section.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
94. Extension.extension:section.value[x]
Control	0..0
96. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
98. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `EvidenceReport.section` (new:BackboneElement)
Short	R5: Composition is broken into sections (new)
Comments	Element `EvidenceReport.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:title
Slice Name	title
Definition	R5: `EvidenceReport.section.title` (new:string)
Short	R5: Label for section (e.g. for ToC) (new)
Comments	Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Section headings are often standardized for different types of documents. They give guidance to humans on how the document is organized. Element `EvidenceReport.section.title` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.title` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.title` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:title.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:title.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:title.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`title`
14. Extension.extension:title.value[x]
Definition	The label for this particular section. This will be part of the rendered content for the document, and is often used to build a table of contents.
Short	Label for section (e.g. for ToC)
Comments	The title identifies the section for a human reader. The title must be consistent with the narrative of the resource that is the target of the section.content reference. Generally, sections SHOULD have titles, but in some documents, it is unnecessary or inappropriate. Typically, this is where a section has subsections that have their own adequately distinguishing title, or documents that only have a single section.
Control	0..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:focus
Slice Name	focus
Definition	R5: `EvidenceReport.section.focus` (new:CodeableConcept)
Short	R5: Classification of section (recommended) (new)
Comments	Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Provides computable standardized labels to sections within the document. Element `EvidenceReport.section.focus` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focus` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focus` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:focus.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:focus.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:focus.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`focus`
24. Extension.extension:focus.value[x]
Definition	A code identifying the kind of content contained within the section. This should be consistent with the section title.
Short	Classification of section (recommended)
Comments	The code identifies the section for an automated processor of the document. This is particularly relevant when using profiles to control the structure of the document. If the section has content (instead of sub-sections), the section.code does not change the meaning or interpretation of the resource that is the content of the section in the comments for the section.code.
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5EvidenceReportSectionForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-report-section-for-R4\|0.1.0`) Evidence Report Section Type.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:focusReference
Slice Name	focusReference
Definition	R5: `EvidenceReport.section.focusReference` (new:Reference(Resource))
Short	R5: Classification of section by Resource (new)
Comments	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.focusReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.focusReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.focusReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:focusReference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:focusReference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:focusReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`focusReference`
34. Extension.extension:focusReference.value[x]
Definition	A definitional Resource identifying the kind of content contained within the section. This should be consistent with the section title.
Short	Classification of section by Resource
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:author
Slice Name	author
Definition	R5: `EvidenceReport.section.author` (new:Reference(Patient,Practitioner,PractitionerRole,RelatedPerson,Device,Group,Organization))
Short	R5: Who and/or what authored the section (new)
Comments	Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Identifies who is responsible for the content. Element `EvidenceReport.section.author` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.author` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.author` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:author.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:author.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:author.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`author`
44. Extension.extension:author.value[x]
Definition	Identifies who is responsible for the information in this section, not necessarily who typed it in.
Short	Who and/or what authored the section
Control	0..1
Type	Reference(Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.Group for use in FHIR R4, Group, Cross-version Profile for R5.Organization for use in FHIR R4, Organization)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:text
Slice Name	text
Definition	R5: `EvidenceReport.section.text` (new:Narrative)
Short	R5: Text summary of the section, for human interpretation (new)
Comments	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Document profiles may define what content should be represented in the narrative.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.text` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.text` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.text` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:text.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:text.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:text.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `Narrative` in FHIR R4
Short	DataType slice for a FHIR R5 `Narrative` value
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Extension.extension:text.extension:_datatype.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
56. Extension.extension:text.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
58. Extension.extension:text.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
60. Extension.extension:text.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: Narrative
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`Narrative`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
62. Extension.extension:text.extension:status
Slice Name	status
Definition	R5: `Narrative.status`
Short	R5: status
Comments	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `Narrative.status` is mapped to FHIR R4 element `Narrative.status` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
64. Extension.extension:text.extension:status.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
66. Extension.extension:text.extension:status.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
68. Extension.extension:text.extension:status.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`status`
70. Extension.extension:text.extension:status.value[x]
Definition	The status of the narrative - whether it's entirely generated (from just the defined data or the extensions too), or whether a human authored it and it may contain additional data.
Short	generated \| extensions \| additional \| empty
Control	1..1
Binding	The codes SHALL be taken from NarrativeStatus (required to `http://hl7.org/fhir/ValueSet/narrative-status\|4.0.1`) The status of a resource narrative.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
72. Extension.extension:text.extension:div
Slice Name	div
Definition	R5: `Narrative.div`
Short	R5: div
Comments	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`. The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `Narrative.div` is mapped to FHIR R4 element `Narrative.div` as `Equivalent`.
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
74. Extension.extension:text.extension:div.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
76. Extension.extension:text.extension:div.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
78. Extension.extension:text.extension:div.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`div`
80. Extension.extension:text.extension:div.value[x]
Definition	The actual narrative content, a stripped down version of XHTML.
Short	Limited xhtml content
Comments	The contents of the html element are an XHTML fragment containing only the basic html formatting elements described in chapters 7-11 and 15 of the HTML 4.0 standard, <a> elements (either name or href), images and internally contained stylesheets. The XHTML content SHALL NOT contain a head, a body, external stylesheet references, scripts, forms, base/link/xlink, frames, iframes and objects.
Control	1..1
Type	uri
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
82. Extension.extension:text.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`text`
84. Extension.extension:text.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
86. Extension.extension:mode
Slice Name	mode
Definition	R5: `EvidenceReport.section.mode` (new:code)
Short	R5: working \| snapshot \| changes (new)
Comments	Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Sections are used in various ways, and it must be known in what way it is safe to use the entries in them. Element `EvidenceReport.section.mode` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.mode` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.mode` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
88. Extension.extension:mode.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
90. Extension.extension:mode.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
92. Extension.extension:mode.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`mode`
94. Extension.extension:mode.value[x]
Definition	How the entry list was prepared - whether it is a working list that is suitable for being maintained on an ongoing basis, or if it represents a snapshot of a list of items from another source, or whether it is a prepared list where items may be marked as added, modified or deleted.
Short	working \| snapshot \| changes
Comments	This element is labeled as a modifier because a change list must not be misunderstood as a complete list.
Control	0..1
Binding	The codes SHALL be taken from ListMode (required to `http://hl7.org/fhir/ValueSet/list-mode\|4.0.1`) The processing mode that applies to this section.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
96. Extension.extension:orderedBy
Slice Name	orderedBy
Definition	R5: `EvidenceReport.section.orderedBy` (new:CodeableConcept)
Short	R5: Order of section entries (new)
Comments	Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Important for presentation and rendering. Lists may be sorted to place more important information first or to group related entries. Element `EvidenceReport.section.orderedBy` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.orderedBy` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.orderedBy` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
98. Extension.extension:orderedBy.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
100. Extension.extension:orderedBy.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
102. Extension.extension:orderedBy.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`orderedBy`
104. Extension.extension:orderedBy.value[x]
Definition	Specifies the order applied to the items in the section entries.
Short	Order of section entries
Comments	Applications SHOULD render ordered lists in the order provided, but MAY allow users to re-order based on their own preferences as well. If there is no order specified, the order is unknown, though there may still be some order.
Control	0..1
Binding	The codes SHOULD be taken from ListOrderCodes (preferred to `http://hl7.org/fhir/ValueSet/list-order\|4.0.1`) What order applies to the items in the entry.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
106. Extension.extension:entryClassifier
Slice Name	entryClassifier
Definition	R5: `EvidenceReport.section.entryClassifier` (new:CodeableConcept)
Short	R5: Extensible classifiers as content (new)
Comments	Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	May be used in searching and filtering, or may be the key content of the report. Element `EvidenceReport.section.entryClassifier` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryClassifier` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryClassifier` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
108. Extension.extension:entryClassifier.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
110. Extension.extension:entryClassifier.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
112. Extension.extension:entryClassifier.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryClassifier`
114. Extension.extension:entryClassifier.value[x]
Definition	Specifies any type of classification of the evidence report.
Short	Extensible classifiers as content
Control	0..1
Binding	Unless not suitable, these codes SHALL be taken from R5EvidenceClassifierCodeForR4 (0.1.0) (extensible to `http://hl7.org/fhir/uv/xver/ValueSet/R5-evidence-classifier-code-for-R4\|0.1.0`) Commonly used classifiers for evidence sets.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
116. Extension.extension:entryReference
Slice Name	entryReference
Definition	R5: `EvidenceReport.section.entryReference` (new:Reference(Resource))
Short	R5: Reference to resources as content (new)
Comments	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.entryReference` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryReference` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
118. Extension.extension:entryReference.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
120. Extension.extension:entryReference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
122. Extension.extension:entryReference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryReference`
124. Extension.extension:entryReference.value[x]
Definition	A reference to the actual resource from which the narrative in the section is derived.
Short	Reference to resources as content
Comments	If there are no entries in the list, an emptyReason SHOULD be provided.
Control	0..1
Type	Reference(Cross-version Profile for R5.Resource for use in FHIR R4, Resource)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
126. Extension.extension:entryQuantity
Slice Name	entryQuantity
Definition	R5: `EvidenceReport.section.entryQuantity` (new:Quantity)
Short	R5: Quantity as content (new)
Comments	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.entryQuantity` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.entryQuantity` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.entryQuantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
128. Extension.extension:entryQuantity.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
130. Extension.extension:entryQuantity.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
132. Extension.extension:entryQuantity.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`entryQuantity`
134. Extension.extension:entryQuantity.value[x]
Definition	Quantity as content.
Short	Quantity as content
Control	0..1
Type	Quantity
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
136. Extension.extension:emptyReason
Slice Name	emptyReason
Definition	R5: `EvidenceReport.section.emptyReason` (new:CodeableConcept)
Short	R5: Why the section is empty (new)
Comments	Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Allows capturing things like "none exist" or "not asked" which can be important for most lists. Element `EvidenceReport.section.emptyReason` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.emptyReason` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.emptyReason` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
138. Extension.extension:emptyReason.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
140. Extension.extension:emptyReason.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
142. Extension.extension:emptyReason.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`emptyReason`
144. Extension.extension:emptyReason.value[x]
Definition	If the section is empty, why the list is empty. An empty section typically has some text explaining the empty reason.
Short	Why the section is empty
Comments	The various reasons for an empty section make a significant interpretation to its interpretation. Note that this code is for use when the entire section content has been suppressed, and not for when individual items are omitted - implementers may consider using a text note or a flag on an entry in these cases.
Control	0..1
Binding	The codes SHOULD be taken from ListEmptyReasons (preferred to `http://hl7.org/fhir/ValueSet/list-empty-reason\|4.0.1`) If a section is empty, why it is empty.
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
146. Extension.extension:section
Slice Name	section
Definition	R5: `EvidenceReport.section.section` (new:EvidenceReport.section)
Short	R5: Nested Section (new)
Comments	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Nested sections are primarily used to help human readers navigate to particular portions of the document.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `EvidenceReport.section.section` is part of an existing definition because parent element `EvidenceReport.section` requires a cross-version extension. Element `EvidenceReport.section.section` is not mapped to FHIR R4, since FHIR R5 `EvidenceReport` is not mapped. Element `EvidenceReport.section.section` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
148. Extension.extension:section.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
150. Extension.extension:section.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
152. Extension.extension:section.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
154. Extension.extension:section.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
156. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-EvidenceReport.section`
158. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)