Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the ext-R5-DeviceDispense.performer extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: Optional Extension Element - found in all resources. |
| Short | R5: Who performed event (new)Optional Extensions Element |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:function | |
| Slice Name | function |
| Definition | R5: |
| Short | R5: Who performed the dispense and what they did (new)Additional content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Allows disambiguation of the types of involvement of different performers. Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:function.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | function |
| 8. Extension.extension:function.value[x] | |
| Definition | Distinguishes the type of performer in the dispense. For example, date enterer, packager, final checker. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Who performed the dispense and what they didValue of extension |
| Control | 0..1 |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:actor | |
| Slice Name | actor |
| Definition | R5: |
| Short | R5: Individual who was performing (new)Additional content defined by implementations |
| Comments | Element |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:actor.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | actor |
| 14. Extension.extension:actor.value[x] | |
| Definition | The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the device. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Individual who was performingValue of extension |
| Control | 10..1 |
| Type | Reference(Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization, Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.CareTeam for use in FHIR R4, CareTeam), date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDispense.performer |
| 18. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Who performed event (new) |
| Comments | Element |
| Control | 0..* |
| Is Modifier | false |
| 2. Extension.extension | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:function | |
| Slice Name | function |
| Definition | R5: |
| Short | R5: Who performed the dispense and what they did (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Allows disambiguation of the types of involvement of different performers. Element |
| 6. Extension.extension:function.url | |
| Control | 1..1 |
| Fixed Value | function |
| 8. Extension.extension:function.value[x] | |
| Definition | Distinguishes the type of performer in the dispense. For example, date enterer, packager, final checker. |
| Short | Who performed the dispense and what they did |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 10. Extension.extension:actor | |
| Slice Name | actor |
| Definition | R5: |
| Short | R5: Individual who was performing (new) |
| Comments | Element |
| Control | 1..1 |
| Requirements | Element |
| 12. Extension.extension:actor.url | |
| Control | 1..1 |
| Fixed Value | actor |
| 14. Extension.extension:actor.value[x] | |
| Definition | The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the device. |
| Short | Individual who was performing |
| Control | 1..1 |
| Type | Reference(Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization, Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.CareTeam for use in FHIR R4, CareTeam) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 16. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDispense.performer |
| 18. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Who performed event (new) |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:function | |
| Slice Name | function |
| Definition | R5: |
| Short | R5: Who performed the dispense and what they did (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Allows disambiguation of the types of involvement of different performers. Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:function.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:function.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:function.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | function |
| 14. Extension.extension:function.value[x] | |
| Definition | Distinguishes the type of performer in the dispense. For example, date enterer, packager, final checker. |
| Short | Who performed the dispense and what they did |
| Control | 0..1 |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:actor | |
| Slice Name | actor |
| Definition | R5: |
| Short | R5: Individual who was performing (new) |
| Comments | Element |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Requirements | Element |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:actor.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:actor.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:actor.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | actor |
| 24. Extension.extension:actor.value[x] | |
| Definition | The device, practitioner, etc. who performed the action. It should be assumed that the actor is the dispenser of the device. |
| Short | Individual who was performing |
| Control | 1..1 |
| Type | Reference(Cross-version Profile for R5.Practitioner for use in FHIR R4, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR R4, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR R4, Organization, Cross-version Profile for R5.Patient for use in FHIR R4, Patient, Cross-version Profile for R5.Device for use in FHIR R4, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR R4, RelatedPerson, Cross-version Profile for R5.CareTeam for use in FHIR R4, CareTeam) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-DeviceDispense.performer |
| 28. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r5.r4#0.1.0 based on FHIR 4.0.1. Generated 2026-03-20
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change