ExtensionChargeItem_TotalPriceComponent - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR R4 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR R4 - Downloaded Version null See the Directory of published versions

Extension: ExtensionChargeItem_TotalPriceComponent - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-ChargeItem.totalPriceComponent extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ChargeItem.totalPriceComponent` (new:MonetaryComponent) Optional Extension Element - found in all resources.
Short	R5: Total price overriding the associated rules (new)Optional Extensions Element
Comments	Element `ChargeItem.totalPriceComponent` has a context of ChargeItem based on following the parent source element upwards and mapping to `ChargeItem`. Element `ChargeItem.totalPriceComponent` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Often, the total price may be be calculated and recorded on the Invoice, but if a calculated total price must be exchanged prior to Invoice creation, it can be communicated in this property.
Control	0..1* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `MonetaryComponent` in FHIR R4
Short	DataType slice for a FHIR R5 `MonetaryComponent` valueAdditional content defined by implementations
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
6. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: MonetaryComponent
Control	10..1
Type	string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`MonetaryComponent`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Extension.extension:type
Slice Name	type
Definition	R5: `MonetaryComponent.type` (new:code)
Short	R5: base \| surcharge \| deduction \| discount \| tax \| informational (new)Additional content defined by implementations
Comments	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	10..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
14. Extension.extension:type.value[x]
Definition	base \| surcharge \| deduction \| discount \| tax \| informational. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	base \| surcharge \| deduction \| discount \| tax \| informationalValue of extension
Control	10..1
Binding	The codes SHALL be taken from For codes, see R5PriceComponentTypeForR4 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-price-component-type-for-R4\|0.1.0`) The purpose for which an extended contact detail should be used.
Type	code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Extension.extension:code
Slice Name	code
Definition	R5: `MonetaryComponent.code` (new:CodeableConcept)
Short	R5: Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc. (new)Additional content defined by implementations
Comments	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
18. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
20. Extension.extension:code.value[x]
Definition	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.Value of extension
Control	0..1
Type	CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
22. Extension.extension:factor
Slice Name	factor
Definition	R5: `MonetaryComponent.factor` (new:decimal)
Short	R5: Factor used for calculating this component (new)Additional content defined by implementations
Comments	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
24. Extension.extension:factor.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`factor`
26. Extension.extension:factor.value[x]
Definition	Factor used for calculating this component. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Factor used for calculating this componentValue of extension
Control	0..1
Type	decimal, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
28. Extension.extension:amount
Slice Name	amount
Definition	R5: `MonetaryComponent.amount` (new:Money)
Short	R5: Explicit value amount to be used (new)Additional content defined by implementations
Comments	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1*
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
30. Extension.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`amount`
32. Extension.extension:amount.value[x]
Definition	Explicit value amount to be used. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Explicit value amount to be usedValue of extension
Control	0..1
Type	Money, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
34. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ChargeItem.totalPriceComponent`
36. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ChargeItem.totalPriceComponent` (new:MonetaryComponent)
Short	R5: Total price overriding the associated rules (new)
Comments	Element `ChargeItem.totalPriceComponent` has a context of ChargeItem based on following the parent source element upwards and mapping to `ChargeItem`. Element `ChargeItem.totalPriceComponent` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Often, the total price may be be calculated and recorded on the Invoice, but if a calculated total price must be exchanged prior to Invoice creation, it can be communicated in this property.
Control	0..1
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `MonetaryComponent` in FHIR R4
Short	DataType slice for a FHIR R5 `MonetaryComponent` value
Control	1..1
6. Extension.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Comments	Must be: MonetaryComponent
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`MonetaryComponent`
10. Extension.extension:type
Slice Name	type
Definition	R5: `MonetaryComponent.type` (new:code)
Short	R5: base \| surcharge \| deduction \| discount \| tax \| informational (new)
Comments	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1
Requirements	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
12. Extension.extension:type.url
Control	1..1
Fixed Value	`type`
14. Extension.extension:type.value[x]
Definition	base \| surcharge \| deduction \| discount \| tax \| informational.
Short	base \| surcharge \| deduction \| discount \| tax \| informational
Control	1..1
Binding	The codes SHALL be taken from R5PriceComponentTypeForR4 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-price-component-type-for-R4\|0.1.0`) The purpose for which an extended contact detail should be used.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
16. Extension.extension:code
Slice Name	code
Definition	R5: `MonetaryComponent.code` (new:CodeableConcept)
Short	R5: Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc. (new)
Comments	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
18. Extension.extension:code.url
Control	1..1
Fixed Value	`code`
20. Extension.extension:code.value[x]
Definition	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.
Short	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.extension:factor
Slice Name	factor
Definition	R5: `MonetaryComponent.factor` (new:decimal)
Short	R5: Factor used for calculating this component (new)
Comments	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
24. Extension.extension:factor.url
Control	1..1
Fixed Value	`factor`
26. Extension.extension:factor.value[x]
Definition	Factor used for calculating this component.
Short	Factor used for calculating this component
Control	0..1
Type	decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
28. Extension.extension:amount
Slice Name	amount
Definition	R5: `MonetaryComponent.amount` (new:Money)
Short	R5: Explicit value amount to be used (new)
Comments	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Requirements	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
30. Extension.extension:amount.url
Control	1..1
Fixed Value	`amount`
32. Extension.extension:amount.value[x]
Definition	Explicit value amount to be used.
Short	Explicit value amount to be used
Control	0..1
Type	Money
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
34. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ChargeItem.totalPriceComponent`
36. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `ChargeItem.totalPriceComponent` (new:MonetaryComponent)
Short	R5: Total price overriding the associated rules (new)
Comments	Element `ChargeItem.totalPriceComponent` has a context of ChargeItem based on following the parent source element upwards and mapping to `ChargeItem`. Element `ChargeItem.totalPriceComponent` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Often, the total price may be be calculated and recorded on the Invoice, but if a calculated total price must be exchanged prior to Invoice creation, it can be communicated in this property.
Control	0..1 This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `MonetaryComponent` in FHIR R4
Short	DataType slice for a FHIR R5 `MonetaryComponent` value
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
8. Extension.extension:_datatype.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
10. Extension.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
14. Extension.extension:_datatype.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Comments	Must be: MonetaryComponent
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Fixed Value	`MonetaryComponent`
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
16. Extension.extension:type
Slice Name	type
Definition	R5: `MonetaryComponent.type` (new:code)
Short	R5: base \| surcharge \| deduction \| discount \| tax \| informational (new)
Comments	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	1..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.type` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Extension.extension:type.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
20. Extension.extension:type.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:type.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`type`
24. Extension.extension:type.value[x]
Definition	base \| surcharge \| deduction \| discount \| tax \| informational.
Short	base \| surcharge \| deduction \| discount \| tax \| informational
Control	1..1
Binding	The codes SHALL be taken from R5PriceComponentTypeForR4 (0.1.0) (required to `http://hl7.org/fhir/uv/xver/ValueSet/R5-price-component-type-for-R4\|0.1.0`) The purpose for which an extended contact detail should be used.
Type	code
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
26. Extension.extension:code
Slice Name	code
Definition	R5: `MonetaryComponent.code` (new:CodeableConcept)
Short	R5: Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc. (new)
Comments	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.code` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Extension.extension:code.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
30. Extension.extension:code.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:code.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`code`
34. Extension.extension:code.value[x]
Definition	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.
Short	Codes may be used to differentiate between kinds of taxes, surcharges, discounts etc.
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
36. Extension.extension:factor
Slice Name	factor
Definition	R5: `MonetaryComponent.factor` (new:decimal)
Short	R5: Factor used for calculating this component (new)
Comments	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.factor` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.factor` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Extension.extension:factor.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
40. Extension.extension:factor.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
42. Extension.extension:factor.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`factor`
44. Extension.extension:factor.value[x]
Definition	Factor used for calculating this component.
Short	Factor used for calculating this component
Control	0..1
Type	decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
46. Extension.extension:amount
Slice Name	amount
Definition	R5: `MonetaryComponent.amount` (new:Money)
Short	R5: Explicit value amount to be used (new)
Comments	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension
Is Modifier	false
Summary	false
Requirements	Element `MonetaryComponent.amount` is not mapped to FHIR R4, since FHIR R5 `MonetaryComponent` is not mapped. Element `MonetaryComponent.amount` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Extension.extension:amount.id
Definition	Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	Unique id for inter-element referencing
Control	0..1
Type	string
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
50. Extension.extension:amount.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	false
Summary	false
Alternate Names	extensions, user content
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
52. Extension.extension:amount.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`amount`
54. Extension.extension:amount.value[x]
Definition	Explicit value amount to be used.
Short	Explicit value amount to be used
Control	0..1
Type	Money
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Is Modifier	false
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)
56. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Is Modifier	false
XML Format	In the XML format, this property is represented as an attribute.
Summary	false
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-ChargeItem.totalPriceComponent`
58. Extension.value[x]
Definition	Value of extension - must be one of a constrained set of the data types (see Extensibility for a list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta
Is Modifier	false
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() or (children().count() > id.count())`)