Generated Narrative: ConceptMap R5-EvidenceVariable-element-map-to-R4 Mapping from http://hl7.org/fhir/5.0 to http://hl7.org/fhir/4.0 Group 1 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to EvidenceVariableversion: 4.0.1) Source Code Relationship Target Code Comment EvidenceVariable.meta (meta) is equivalent to EvidenceVariable.meta Element `EvidenceVariable.meta` is mapped to FHIR R4 element `EvidenceVariable.meta` as `Equivalent`. EvidenceVariable.implicitRules (implicitRules) is equivalent to EvidenceVariable.implicitRules Element `EvidenceVariable.implicitRules` is mapped to FHIR R4 element `EvidenceVariable.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc. EvidenceVariable.language (language) is equivalent to EvidenceVariable.language Element `EvidenceVariable.language` is mapped to FHIR R4 element `EvidenceVariable.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute). EvidenceVariable.text (text) is equivalent to EvidenceVariable.text Element `EvidenceVariable.text` is mapped to FHIR R4 element `EvidenceVariable.text` as `Equivalent`. Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later. EvidenceVariable.contained (contained) is equivalent to EvidenceVariable.contained Element `EvidenceVariable.contained` is mapped to FHIR R4 element `EvidenceVariable.contained` as `Equivalent`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels. EvidenceVariable.url (url) is equivalent to EvidenceVariable.url Element `EvidenceVariable.url` is mapped to FHIR R4 element `EvidenceVariable.url` as `Equivalent`. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found. EvidenceVariable.identifier (identifier) is equivalent to EvidenceVariable.identifier Element `EvidenceVariable.identifier` is mapped to FHIR R4 element `EvidenceVariable.identifier` as `Equivalent`. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this evidence variable outside of FHIR, where it is not possible to use the logical URI. EvidenceVariable.version (version) is equivalent to EvidenceVariable.version Element `EvidenceVariable.version` is mapped to FHIR R4 element `EvidenceVariable.version` as `Equivalent`. There may be different evidence variable instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the evidence variable with the format [url]|[version]. The version SHOULD NOT contain a '#' - see [Business Version](https://hl7.org/fhir/resource.h.html#bv-format). EvidenceVariable.name (name) is equivalent to EvidenceVariable.name Element `EvidenceVariable.name` is mapped to FHIR R4 element `EvidenceVariable.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly. EvidenceVariable.title (title) is equivalent to EvidenceVariable.title Element `EvidenceVariable.title` is mapped to FHIR R4 element `EvidenceVariable.title` as `Equivalent`. This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc. EvidenceVariable.shortTitle (shortTitle) is equivalent to EvidenceVariable.shortTitle Element `EvidenceVariable.shortTitle` is mapped to FHIR R4 element `EvidenceVariable.shortTitle` as `Equivalent`. EvidenceVariable.status (status) is equivalent to EvidenceVariable.status Element `EvidenceVariable.status` is mapped to FHIR R4 element `EvidenceVariable.status` as `Equivalent`. Allows filtering of evidence variables that are appropriate for use versus not. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). EvidenceVariable.date (date) is equivalent to EvidenceVariable.date Element `EvidenceVariable.date` is mapped to FHIR R4 element `EvidenceVariable.date` as `Equivalent`. The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the evidence variable. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). EvidenceVariable.publisher (publisher) is equivalent to EvidenceVariable.publisher Element `EvidenceVariable.publisher` is mapped to FHIR R4 element `EvidenceVariable.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the evidence variable is the organization or individual primarily responsible for the maintenance and upkeep of the evidence variable. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence variable. This item SHOULD be populated unless the information is available from context. EvidenceVariable.contact (contact) is equivalent to EvidenceVariable.contact Element `EvidenceVariable.contact` is mapped to FHIR R4 element `EvidenceVariable.contact` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). EvidenceVariable.description (description) is equivalent to EvidenceVariable.description Element `EvidenceVariable.description` is mapped to FHIR R4 element `EvidenceVariable.description` as `Equivalent`. This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the evidence variable as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the evidence variable is presumed to be the predominant language in the place the evidence variable was created). EvidenceVariable.note (note) is equivalent to EvidenceVariable.note Element `EvidenceVariable.note` is mapped to FHIR R4 element `EvidenceVariable.note` as `Equivalent`. EvidenceVariable.useContext (useContext) is equivalent to EvidenceVariable.useContext Element `EvidenceVariable.useContext` is mapped to FHIR R4 element `EvidenceVariable.useContext` as `Equivalent`. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply. EvidenceVariable.author (author) is equivalent to EvidenceVariable.author Element `EvidenceVariable.author` is mapped to FHIR R4 element `EvidenceVariable.author` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). EvidenceVariable.editor (editor) is equivalent to EvidenceVariable.editor Element `EvidenceVariable.editor` is mapped to FHIR R4 element `EvidenceVariable.editor` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). EvidenceVariable.reviewer (reviewer) is equivalent to EvidenceVariable.reviewer Element `EvidenceVariable.reviewer` is mapped to FHIR R4 element `EvidenceVariable.reviewer` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). EvidenceVariable.endorser (endorser) is equivalent to EvidenceVariable.endorser Element `EvidenceVariable.endorser` is mapped to FHIR R4 element `EvidenceVariable.endorser` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). EvidenceVariable.relatedArtifact (relatedArtifact) is equivalent to EvidenceVariable.relatedArtifact Element `EvidenceVariable.relatedArtifact` is mapped to FHIR R4 element `EvidenceVariable.relatedArtifact` as `Equivalent`. Each related artifact is either an attachment, or a reference to another resource, but not both. EvidenceVariable.characteristic (characteristic) maps to wider concept EvidenceVariable.characteristic Element `EvidenceVariable.characteristic` is mapped to FHIR R4 element `EvidenceVariable.characteristic` as `Equivalent`. Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria. EvidenceVariable.characteristic.description (description) is equivalent to EvidenceVariable.characteristic.description Element `EvidenceVariable.characteristic.description` is mapped to FHIR R4 element `EvidenceVariable.characteristic.description` as `Equivalent`. EvidenceVariable.characteristic.exclude (exclude) is equivalent to EvidenceVariable.characteristic.exclude Element `EvidenceVariable.characteristic.exclude` is mapped to FHIR R4 element `EvidenceVariable.characteristic.exclude` as `Equivalent`. EvidenceVariable.characteristic.timeFromEvent (timeFromEvent) maps to wider concept EvidenceVariable.characteristic.timeFromStart Element `EvidenceVariable.characteristic.timeFromEvent` is mapped to FHIR R4 element `EvidenceVariable.characteristic.timeFromStart` as `SourceIsBroaderThanTarget`. Group 2 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: How to compare versions (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.versionAlgorithm[x] (versionAlgorithm[x]) maps to wider concept Extension (R5: How to compare versions (new)) Element `EvidenceVariable.versionAlgorithm[x]` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.versionAlgorithm[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 is newer, and a 0 if the version ordering can't successfully be determined. Group 3 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: For testing purposes, not real usage (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.experimental (experimental) maps to wider concept Extension (R5: For testing purposes, not real usage (new)) Element `EvidenceVariable.experimental` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.experimental` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 4 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Why this EvidenceVariable is defined (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.purpose (purpose) maps to wider concept Extension (R5: Why this EvidenceVariable is defined (new)) Element `EvidenceVariable.purpose` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.purpose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the EvidenceVariable. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this EvidenceVariable. Group 5 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Use and/or publishing restrictions (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.copyright (copyright) maps to wider concept Extension (R5: Use and/or publishing restrictions (new)) Element `EvidenceVariable.copyright` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.copyright` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 6 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Copyright holder and year(s) (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.copyrightLabel (copyrightLabel) maps to wider concept Extension (R5: Copyright holder and year(s) (new)) Element `EvidenceVariable.copyrightLabel` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.copyrightLabel` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element. Group 7 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: When the resource was approved by publisher (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.approvalDate (approvalDate) maps to wider concept Extension (R5: When the resource was approved by publisher (new)) Element `EvidenceVariable.approvalDate` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.approvalDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 8 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: When the resource was last reviewed by the publisher (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.lastReviewDate (lastReviewDate) maps to wider concept Extension (R5: When the resource was last reviewed by the publisher (new)) Element `EvidenceVariable.lastReviewDate` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.lastReviewDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). Group 9 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: When the resource is expected to be used (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.effectivePeriod (effectivePeriod) maps to wider concept Extension (R5: When the resource is expected to be used (new)) Element `EvidenceVariable.effectivePeriod` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.effectivePeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The effective period for an EvidenceVariable determines when the content is applicable for usage and is independent of publication and review dates. For example, a variable intended to be used for the year 2016 might be published in 2015. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization). Group 10 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Actual or conceptual (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.actual (actual) is equivalent to Extension (R5: Actual or conceptual (new)) Element `EvidenceVariable.actual` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.actual` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 11 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: A defining factor of the EvidenceVariableversion: 0.1.0) Source Concept Details Relationship Target Concept Details Comment Codes from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 Codes from R5: A defining factor of the EvidenceVariable EvidenceVariable.characteristic characteristic is equivalent to Extension Element `EvidenceVariable.characteristic` is mapped to FHIR R4 element `EvidenceVariable.characteristic` as `Equivalent`. Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria. EvidenceVariable.characteristic.linkId linkId maps to wider concept Extension.extension:linkId Element `EvidenceVariable.characteristic.linkId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.linkId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.description description is equivalent to Extension.extension:description Element `EvidenceVariable.characteristic.description` is mapped to FHIR R4 element `EvidenceVariable.characteristic.description` as `Equivalent`. EvidenceVariable.characteristic.note note maps to wider concept Extension.extension:note Element `EvidenceVariable.characteristic.note` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.exclude exclude is equivalent to Extension.extension:exclude Element `EvidenceVariable.characteristic.exclude` is mapped to FHIR R4 element `EvidenceVariable.characteristic.exclude` as `Equivalent`. EvidenceVariable.characteristic.definitionReference definitionReference maps to wider concept Extension.extension:definitionReference Element `EvidenceVariable.characteristic.definitionReference` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionCanonical definitionCanonical maps to wider concept Extension.extension:definitionCanonical Element `EvidenceVariable.characteristic.definitionCanonical` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCanonical` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionCodeableConcept definitionCodeableConcept maps to wider concept Extension.extension:definitionCodeableConcept Element `EvidenceVariable.characteristic.definitionCodeableConcept` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCodeableConcept` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionExpression definitionExpression maps to wider concept Extension.extension:definitionExpression Element `EvidenceVariable.characteristic.definitionExpression` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionExpression` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). When another element provides a definition of the characteristic, the definitionExpression content SHALL match the definition (only adding technical concepts necessary for implementation) without changing the meaning. EvidenceVariable.characteristic.definitionId definitionId maps to wider concept Extension.extension:definitionId Element `EvidenceVariable.characteristic.definitionId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue definitionByTypeAndValue maps to wider concept Extension.extension:definitionByTypeAndValue Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.type type maps to wider concept Extension.extension:definitionByTypeAndValue.extension:type Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.method method maps to wider concept Extension.extension:definitionByTypeAndValue.extension:method Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.device device maps to wider concept Extension.extension:definitionByTypeAndValue.extension:device Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.value[x] value[x] maps to wider concept Extension.extension:definitionByTypeAndValue.extension:value Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.offset offset maps to wider concept Extension.extension:definitionByTypeAndValue.extension:offset Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination definitionByCombination maps to wider concept Extension.extension:definitionByCombination Element `EvidenceVariable.characteristic.definitionByCombination` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.code code maps to wider concept Extension.extension:definitionByCombination.extension:code Element `EvidenceVariable.characteristic.definitionByCombination.code` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.code` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.threshold threshold maps to wider concept Extension.extension:definitionByCombination.extension:threshold Element `EvidenceVariable.characteristic.definitionByCombination.threshold` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.characteristic characteristic maps to wider concept Extension.extension:definitionByCombination.extension:characteristic Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). maps to wider concept Extension.extension:characteristic Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.instances[x] instances[x] maps to wider concept Extension.extension:instances Element `EvidenceVariable.characteristic.instances[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.instances[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.duration[x] duration[x] maps to wider concept Extension.extension:duration Element `EvidenceVariable.characteristic.duration[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.duration[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.timeFromEvent timeFromEvent maps to wider concept Extension.extension:timeFromEvent Element `EvidenceVariable.characteristic.timeFromEvent` is mapped to FHIR R4 element `EvidenceVariable.characteristic.timeFromStart` as `SourceIsBroaderThanTarget`. EvidenceVariable.characteristic.timeFromEvent.description description is equivalent to Extension.extension:timeFromEvent.extension:description Element `EvidenceVariable.characteristic.timeFromEvent.description` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.timeFromEvent.note note is equivalent to Extension.extension:timeFromEvent.extension:note Element `EvidenceVariable.characteristic.timeFromEvent.note` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.timeFromEvent.event[x] event[x] maps to wider concept Extension.extension:timeFromEvent.extension:event Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.timeFromEvent.quantity quantity is equivalent to Extension.extension:timeFromEvent.extension:quantity Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.timeFromEvent.range range is equivalent to Extension.extension:timeFromEvent.extension:range Element `EvidenceVariable.characteristic.timeFromEvent.range` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.range` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 12 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Label for internal linking (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.linkId (linkId) maps to wider concept Extension (R5: Label for internal linking (new)) Element `EvidenceVariable.characteristic.linkId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.linkId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 13 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Used for footnotes or explanatory notes (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.note (note) maps to wider concept Extension (R5: Used for footnotes or explanatory notes (new)) Element `EvidenceVariable.characteristic.note` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 14 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic (without using type and value) by a Reference (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionReference (definitionReference) maps to wider concept Extension (R5: Defines the characteristic (without using type and value) by a Reference (new)) Element `EvidenceVariable.characteristic.definitionReference` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 15 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic (without using type and value) by a Canonical (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionCanonical (definitionCanonical) maps to wider concept Extension (R5: Defines the characteristic (without using type and value) by a Canonical (new)) Element `EvidenceVariable.characteristic.definitionCanonical` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCanonical` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 16 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic (without using type and value) by a CodeableConcept (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionCodeableConcept (definitionCodeableConcept) maps to wider concept Extension (R5: Defines the characteristic (without using type and value) by a CodeableConcept (new)) Element `EvidenceVariable.characteristic.definitionCodeableConcept` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCodeableConcept` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 17 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic (without using type and value) by an expression (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionExpression (definitionExpression) maps to wider concept Extension (R5: Defines the characteristic (without using type and value) by an expression (new)) Element `EvidenceVariable.characteristic.definitionExpression` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionExpression` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). When another element provides a definition of the characteristic, the definitionExpression content SHALL match the definition (only adding technical concepts necessary for implementation) without changing the meaning. Group 18 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic (without using type and value) by an id (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionId (definitionId) maps to wider concept Extension (R5: Defines the characteristic (without using type and value) by an id (new)) Element `EvidenceVariable.characteristic.definitionId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 19 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Defines the characteristic using type and value (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionByTypeAndValue (definitionByTypeAndValue) maps to wider concept Extension (R5: Defines the characteristic using type and value (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.type (type) maps to wider concept Extension.extension:type (R5: Expresses the type of characteristic (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.method (method) maps to wider concept Extension.extension:method (R5: Method for how the characteristic value was determined (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.device (device) maps to wider concept Extension.extension:device (R5: Device used for determining characteristic (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.value[x] (value[x]) maps to wider concept Extension.extension:value (R5: Defines the characteristic when coupled with characteristic.type (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByTypeAndValue.offset (offset) maps to wider concept Extension.extension:offset (R5: Reference point for valueQuantity or valueRange (new)) Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 20 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Used to specify how two or more characteristics are combined (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.definitionByCombination (definitionByCombination) maps to wider concept Extension (R5: Used to specify how two or more characteristics are combined (new)) Element `EvidenceVariable.characteristic.definitionByCombination` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.code (code) maps to wider concept Extension.extension:code (R5: all-of | any-of | at-least | at-most | statistical | net-effect | dataset (new)) Element `EvidenceVariable.characteristic.definitionByCombination.code` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.code` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.threshold (threshold) maps to wider concept Extension.extension:threshold (R5: Provides the value of "n" when "at-least" or "at-most" codes are used (new)) Element `EvidenceVariable.characteristic.definitionByCombination.threshold` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.characteristic.definitionByCombination.characteristic (characteristic) maps to wider concept Extension.extension:characteristic (R5: A defining factor of the characteristic (new)) Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 21 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Number of occurrences meeting the characteristic (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.instances[x] (instances[x]) maps to wider concept Extension (R5: Number of occurrences meeting the characteristic (new)) Element `EvidenceVariable.characteristic.instances[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.instances[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 22 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Length of time in which the characteristic is met (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.duration[x] (duration[x]) maps to wider concept Extension (R5: Length of time in which the characteristic is met (new)) Element `EvidenceVariable.characteristic.duration[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.duration[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 23 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Human readable description (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.timeFromEvent.description (description) is equivalent to Extension (R5: Human readable description (new)) Element `EvidenceVariable.characteristic.timeFromEvent.description` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 24 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Used for footnotes or explanatory notes (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.timeFromEvent.note (note) is equivalent to Extension (R5: Used for footnotes or explanatory notes (new)) Element `EvidenceVariable.characteristic.timeFromEvent.note` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 25 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: The event used as a base point (reference point) in time (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.timeFromEvent.event[x] (event[x]) maps to wider concept Extension (R5: The event used as a base point (reference point) in time (new)) Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 26 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Used to express the observation at a defined amount of time before or after the event (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.timeFromEvent.quantity (quantity) is equivalent to Extension (R5: Used to express the observation at a defined amount of time before or after the event (new)) Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 27 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: Used to express the observation within a period before and/or after the event (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.characteristic.timeFromEvent.range (range) is equivalent to Extension (R5: Used to express the observation within a period before and/or after the event (new)) Element `EvidenceVariable.characteristic.timeFromEvent.range` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.range` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 28 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: continuous | dichotomous | ordinal | polychotomous (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.handling (handling) is equivalent to Extension (R5: continuous | dichotomous | ordinal | polychotomous (new)) Element `EvidenceVariable.handling` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.handling` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). Group 29 Mapping from http://hl7.org/fhir/StructureDefinition/EvidenceVariable|5.0.0 to R5: A grouping for ordinal or polychotomous variables (new)version: 0.1.0) Source Code Relationship Target Code Comment EvidenceVariable.category (category) is equivalent to Extension (R5: A grouping for ordinal or polychotomous variables (new)) Element `EvidenceVariable.category` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.category.name (name) is equivalent to Extension.extension:name (R5: Description of the grouping (new)) Element `EvidenceVariable.category.name` is part of an existing definition because parent element `EvidenceVariable.category` requires a cross-version extension. Element `EvidenceVariable.category.name` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). EvidenceVariable.category.value[x] (value[x]) is equivalent to Extension.extension:value (R5: Definition of the grouping (new)) Element `EvidenceVariable.category.value[x]` is part of an existing definition because parent element `EvidenceVariable.category` requires a cross-version extension. Element `EvidenceVariable.category.value[x]` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Cross-version mapping for FHIR R5 EvidenceVariable to FHIR R4 EvidenceVariable
This ConceptMap represents cross-version mappings for elements from a FHIR R5 EvidenceVariable to FHIR R4.
Element `EvidenceVariable.meta` is mapped to FHIR R4 element `EvidenceVariable.meta` as `Equivalent`.
Element `EvidenceVariable.implicitRules` is mapped to FHIR R4 element `EvidenceVariable.implicitRules` as `Equivalent`. Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of its narrative along with other profiles, value sets, etc.
Element `EvidenceVariable.language` is mapped to FHIR R4 element `EvidenceVariable.language` as `Equivalent`. Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).
Element `EvidenceVariable.text` is mapped to FHIR R4 element `EvidenceVariable.text` as `Equivalent`. Contained resources do not have a narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.
Element `EvidenceVariable.contained` is mapped to FHIR R4 element `EvidenceVariable.contained` as `Equivalent`. This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags in their meta elements, but SHALL NOT have security labels.
Element `EvidenceVariable.url` is mapped to FHIR R4 element `EvidenceVariable.url` as `Equivalent`. In some cases, the resource can no longer be found at the stated url, but the url itself cannot change. Implementations can use the meta.source element to indicate where the current master source of the resource can be found.
Element `EvidenceVariable.identifier` is mapped to FHIR R4 element `EvidenceVariable.identifier` as `Equivalent`. Typically, this is used for identifiers that can go in an HL7 V3 II (instance identifier) data type, and can then identify this evidence variable outside of FHIR, where it is not possible to use the logical URI.
Element `EvidenceVariable.version` is mapped to FHIR R4 element `EvidenceVariable.version` as `Equivalent`. There may be different evidence variable instances that have the same identifier but different versions. The version can be appended to the url in a reference to allow a reference to a particular business version of the evidence variable with the format [url]|[version]. The version SHOULD NOT contain a '#' - see [Business Version](https://hl7.org/fhir/resource.h.html#bv-format).
Element `EvidenceVariable.name` is mapped to FHIR R4 element `EvidenceVariable.name` as `Equivalent`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Element `EvidenceVariable.title` is mapped to FHIR R4 element `EvidenceVariable.title` as `Equivalent`. This name does not need to be machine-processing friendly and may contain punctuation, white-space, etc.
Element `EvidenceVariable.shortTitle` is mapped to FHIR R4 element `EvidenceVariable.shortTitle` as `Equivalent`.
Element `EvidenceVariable.status` is mapped to FHIR R4 element `EvidenceVariable.status` as `Equivalent`. Allows filtering of evidence variables that are appropriate for use versus not. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.date` is mapped to FHIR R4 element `EvidenceVariable.date` as `Equivalent`. The date is often not tracked until the resource is published, but may be present on draft content. Note that this is not the same as the resource last-modified-date, since the resource may be a secondary representation of the evidence variable. Additional specific dates may be added as extensions or be found by consulting Provenances associated with past versions of the resource. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.publisher` is mapped to FHIR R4 element `EvidenceVariable.publisher` as `Equivalent`. Usually an organization but may be an individual. The publisher (or steward) of the evidence variable is the organization or individual primarily responsible for the maintenance and upkeep of the evidence variable. This is not necessarily the same individual or organization that developed and initially authored the content. The publisher is the primary point of contact for questions or issues with the evidence variable. This item SHOULD be populated unless the information is available from context.
Element `EvidenceVariable.contact` is mapped to FHIR R4 element `EvidenceVariable.contact` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.description` is mapped to FHIR R4 element `EvidenceVariable.description` as `Equivalent`. This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the evidence variable as conveyed in the 'text' field of the resource itself. This item SHOULD be populated unless the information is available from context (e.g. the language of the evidence variable is presumed to be the predominant language in the place the evidence variable was created).
Element `EvidenceVariable.note` is mapped to FHIR R4 element `EvidenceVariable.note` as `Equivalent`.
Element `EvidenceVariable.useContext` is mapped to FHIR R4 element `EvidenceVariable.useContext` as `Equivalent`. When multiple useContexts are specified, there is no expectation that all or any of the contexts apply.
Element `EvidenceVariable.author` is mapped to FHIR R4 element `EvidenceVariable.author` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)).
Element `EvidenceVariable.editor` is mapped to FHIR R4 element `EvidenceVariable.editor` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)).
Element `EvidenceVariable.reviewer` is mapped to FHIR R4 element `EvidenceVariable.reviewer` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.endorser` is mapped to FHIR R4 element `EvidenceVariable.endorser` as `Equivalent`. Extensions to ContactDetail include: contactReference, contactAddress, and contributionTime (see [Clinical Reasoning Module](https://hl7.org/fhir/clinicalreasoning-module.html)). See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.relatedArtifact` is mapped to FHIR R4 element `EvidenceVariable.relatedArtifact` as `Equivalent`. Each related artifact is either an attachment, or a reference to another resource, but not both.
Element `EvidenceVariable.characteristic` is mapped to FHIR R4 element `EvidenceVariable.characteristic` as `Equivalent`. Characteristics can be defined flexibly to accommodate different use cases for membership criteria, ranging from simple codes, all the way to using an expression language to express the criteria.
Element `EvidenceVariable.characteristic.description` is mapped to FHIR R4 element `EvidenceVariable.characteristic.description` as `Equivalent`.
Element `EvidenceVariable.characteristic.exclude` is mapped to FHIR R4 element `EvidenceVariable.characteristic.exclude` as `Equivalent`.
Element `EvidenceVariable.characteristic.timeFromEvent` is mapped to FHIR R4 element `EvidenceVariable.characteristic.timeFromStart` as `SourceIsBroaderThanTarget`.
Element `EvidenceVariable.versionAlgorithm[x]` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.versionAlgorithm[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 is newer, and a 0 if the version ordering can't successfully be determined.
Element `EvidenceVariable.experimental` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.experimental` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.purpose` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.purpose` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). This element does not describe the usage of the EvidenceVariable. Instead, it provides traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this EvidenceVariable.
Element `EvidenceVariable.copyright` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.copyright` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.copyrightLabel` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.copyrightLabel` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.
Element `EvidenceVariable.approvalDate` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.approvalDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.lastReviewDate` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.lastReviewDate` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). If specified, this date follows the original approval date. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.effectivePeriod` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.effectivePeriod` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). The effective period for an EvidenceVariable determines when the content is applicable for usage and is independent of publication and review dates. For example, a variable intended to be used for the year 2016 might be published in 2015. See guidance around (not) making local changes to elements [here](https://hl7.org/fhir/canonicalreso.html#localization).
Element `EvidenceVariable.actual` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.actual` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.linkId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.linkId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.note` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionReference` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionReference` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionCanonical` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCanonical` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionCodeableConcept` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionCodeableConcept` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionExpression` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionExpression` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element). When another element provides a definition of the characteristic, the definitionExpression content SHALL match the definition (only adding technical concepts necessary for implementation) without changing the meaning.
Element `EvidenceVariable.characteristic.definitionId` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionId` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.type` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.method` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.device` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByTypeAndValue` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByTypeAndValue.offset` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByCombination` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByCombination.code` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.code` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.code` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByCombination.threshold` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.threshold` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` is part of an existing definition because parent element `EvidenceVariable.characteristic.definitionByCombination` requires a cross-version extension. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.definitionByCombination.characteristic` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.instances[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.instances[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.duration[x]` has a context of EvidenceVariable.characteristic based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.duration[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.timeFromEvent.description` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.description` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.timeFromEvent.note` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.note` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.event[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.quantity` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.characteristic.timeFromEvent.range` has a context of EvidenceVariable.characteristic.timeFromStart based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.characteristic.timeFromEvent.range` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.handling` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.handling` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.category` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.category.name` is part of an existing definition because parent element `EvidenceVariable.category` requires a cross-version extension. Element `EvidenceVariable.category.name` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category.name` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).
Element `EvidenceVariable.category.value[x]` is part of an existing definition because parent element `EvidenceVariable.category` requires a cross-version extension. Element `EvidenceVariable.category.value[x]` has a context of EvidenceVariable based on following the parent source element upwards and mapping to `EvidenceVariable`. Element `EvidenceVariable.category.value[x]` has no mapping targets in FHIR R4. Typically, this is because the element has been added (is a new element).