FHIR Cross-Version Extensions package for FHIR R4 from FHIR R5
0.0.1-snapshot-2 - informative
FHIR Cross-Version Extensions package for FHIR R4 from FHIR R5
0.0.1-snapshot-2 - informative
FHIR Cross-Version Extensions package for FHIR R4 from FHIR R5 - Version 0.0.1-snapshot-2. See the Directory of published versions
| Page standards status: Informative | Maturity Level: 0 |
Definitions for the ext-R5-AdministrableProductDefinition extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | A medicinal product in the final form which is suitable for administering to a patient (after any mixing of multiple components, dissolution etc. has been performed). |
| Short | A medicinal product in the final form, suitable for administration - after any mixing of multiple components |
| Control | 0..* |
| 2. Extension.extension | |
| Control | 2..* |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 4. Extension.extension:status | |
| Slice Name | status |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
| Short | draft | active | retired | unknown |
| Control | 1..1 |
| 6. Extension.extension:status.url | |
| Control | 1..1 |
| Fixed Value | status |
| 8. Extension.extension:status.value[x] | |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
| Short | draft | active | retired | unknown |
| Binding | The codes SHALL be taken from R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:formOf | |
| Slice Name | formOf |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product |
| Control | 0..* |
| 12. Extension.extension:formOf.url | |
| Control | 1..1 |
| Fixed Value | formOf |
| 14. Extension.extension:formOf.value[x] | |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 16. Extension.extension:administrableDoseForm | |
| Slice Name | administrableDoseForm |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
| Short | The dose form of the final product after necessary reconstitution or processing |
| Control | 0..1 |
| 18. Extension.extension:administrableDoseForm.url | |
| Control | 1..1 |
| Fixed Value | administrableDoseForm |
| 20. Extension.extension:administrableDoseForm.value[x] | |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
| Short | The dose form of the final product after necessary reconstitution or processing |
| Binding | For example codes, see R5_administrable_dose_form_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-administrable-dose-form-for-R4|0.0.1-snapshot-2)Dose form for a medication, in the form suitable for administering to the patient, after mixing, where necessary. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 22. Extension.extension:unitOfPresentation | |
| Slice Name | unitOfPresentation |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' |
| Control | 0..1 |
| 24. Extension.extension:unitOfPresentation.url | |
| Control | 1..1 |
| Fixed Value | unitOfPresentation |
| 26. Extension.extension:unitOfPresentation.value[x] | |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' |
| Binding | For example codes, see R5_unit_of_presentation_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-unit-of-presentation-for-R4|0.0.1-snapshot-2)The presentation type in which an administrable medicinal product is given to a patient. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 28. Extension.extension:producedFrom | |
| Slice Name | producedFrom |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form |
| Control | 0..* |
| 30. Extension.extension:producedFrom.url | |
| Control | 1..1 |
| Fixed Value | producedFrom |
| 32. Extension.extension:producedFrom.value[x] | |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 34. Extension.extension:ingredient | |
| Slice Name | ingredient |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource |
| Control | 0..* |
| 36. Extension.extension:ingredient.url | |
| Control | 1..1 |
| Fixed Value | ingredient |
| 38. Extension.extension:ingredient.value[x] | |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource |
| Binding | For example codes, see R5_substance_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-substance-codes-for-R4|0.0.1-snapshot-2)This value set includes all substance codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 40. Extension.extension:device | |
| Slice Name | device |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product |
| Control | 0..1 |
| 42. Extension.extension:device.url | |
| Control | 1..1 |
| Fixed Value | device |
| 44. Extension.extension:device.value[x] | |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 46. Extension.extension:description | |
| Slice Name | description |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed |
| Control | 0..1 |
| 48. Extension.extension:description.url | |
| Control | 1..1 |
| Fixed Value | description |
| 50. Extension.extension:description.value[x] | |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed |
| Type | markdown |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 52. Extension.extension:property | |
| Slice Name | property |
| Definition | This cross-version extension represents AdministrableProductDefinition.property from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Characteristics e.g. a product's onset of action |
| Control | 0..* |
| 54. Extension.extension:property.extension | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 56. Extension.extension:property.extension:type | |
| Slice Name | type |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A code expressing the type of characteristic |
| Control | 1..1 |
| 58. Extension.extension:property.extension:type.url | |
| Control | 1..1 |
| Fixed Value | type |
| 60. Extension.extension:property.extension:type.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A code expressing the type of characteristic |
| Binding | For example codes, see R5_product_characteristic_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-product-characteristic-codes-for-R4|0.0.1-snapshot-2)This value set includes all observable entity codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 62. Extension.extension:property.extension:value[x] | |
| Slice Name | value[x] |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the characteristic |
| Control | 0..1 |
| 64. Extension.extension:property.extension:value[x].url | |
| Control | 1..1 |
| Fixed Value | value[x] |
| 66. Extension.extension:property.extension:value[x].value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the characteristic |
| Type | Choice of: CodeableConcept, Quantity, date, boolean, markdown, Attachment, Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 68. Extension.extension:property.extension:status | |
| Slice Name | status |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The status of characteristic e.g. assigned or pending |
| Control | 0..1 |
| 70. Extension.extension:property.extension:status.url | |
| Control | 1..1 |
| Fixed Value | status |
| 72. Extension.extension:property.extension:status.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The status of characteristic e.g. assigned or pending |
| Binding | The codes SHALL be taken from R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 74. Extension.extension:property.url | |
| Control | 1..1 |
| Fixed Value | property |
| 76. Extension.extension:routeOfAdministration | |
| Slice Name | routeOfAdministration |
| Definition | The path by which the product is taken into or makes contact with the body. In some regions this is referred to as the licenced or approved route. RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa). |
| Short | The path by which the product is taken into or makes contact with the body |
| Control | 1..* |
| 78. Extension.extension:routeOfAdministration.extension | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 80. Extension.extension:routeOfAdministration.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the route |
| Control | 1..1 |
| 82. Extension.extension:routeOfAdministration.extension:code.url | |
| Control | 1..1 |
| Fixed Value | code |
| 84. Extension.extension:routeOfAdministration.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the route |
| Binding | For example codes, see R5_route_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-route-codes-for-R4|0.0.1-snapshot-2)A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 86. Extension.extension:routeOfAdministration.extension:firstDose | |
| Slice Name | firstDose |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
| Short | The first dose (dose quantity) administered can be specified for the product |
| Control | 0..1 |
| 88. Extension.extension:routeOfAdministration.extension:firstDose.url | |
| Control | 1..1 |
| Fixed Value | firstDose |
| 90. Extension.extension:routeOfAdministration.extension:firstDose.value[x] | |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
| Short | The first dose (dose quantity) administered can be specified for the product |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 92. Extension.extension:routeOfAdministration.extension:maxSingleDose | |
| Slice Name | maxSingleDose |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
| Short | The maximum single dose that can be administered |
| Control | 0..1 |
| 94. Extension.extension:routeOfAdministration.extension:maxSingleDose.url | |
| Control | 1..1 |
| Fixed Value | maxSingleDose |
| 96. Extension.extension:routeOfAdministration.extension:maxSingleDose.value[x] | |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
| Short | The maximum single dose that can be administered |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 98. Extension.extension:routeOfAdministration.extension:maxDosePerDay | |
| Slice Name | maxDosePerDay |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
| Short | The maximum dose quantity to be administered in any one 24-h period |
| Control | 0..1 |
| 100. Extension.extension:routeOfAdministration.extension:maxDosePerDay.url | |
| Control | 1..1 |
| Fixed Value | maxDosePerDay |
| 102. Extension.extension:routeOfAdministration.extension:maxDosePerDay.value[x] | |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
| Short | The maximum dose quantity to be administered in any one 24-h period |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 104. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod | |
| Slice Name | maxDosePerTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum dose per treatment period that can be administered |
| Control | 0..1 |
| 106. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.url | |
| Control | 1..1 |
| Fixed Value | maxDosePerTreatmentPeriod |
| 108. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum dose per treatment period that can be administered |
| Type | Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 110. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod | |
| Slice Name | maxTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum treatment period during which the product can be administered |
| Control | 0..1 |
| 112. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.url | |
| Control | 1..1 |
| Fixed Value | maxTreatmentPeriod |
| 114. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum treatment period during which the product can be administered |
| Type | Duration |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 116. Extension.extension:routeOfAdministration.extension:targetSpecies | |
| Slice Name | targetSpecies |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species for which this route applies |
| Control | 0..* |
| 118. Extension.extension:routeOfAdministration.extension:targetSpecies.extension | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 120. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the species |
| Control | 1..1 |
| 122. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.url | |
| Control | 1..1 |
| Fixed Value | code |
| 124. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the species |
| Binding | For example codes, see R5_target_species_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-target-species-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 126. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod | |
| Slice Name | withdrawalPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species specific time during which consumption of animal product is not appropriate |
| Control | 0..* |
| 128. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension | |
| Control | 2..* |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 130. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue | |
| Slice Name | tissue |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milk |
| Control | 1..1 |
| 132. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.url | |
| Control | 1..1 |
| Fixed Value | tissue |
| 134. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.value[x] | |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milk |
| Binding | For example codes, see R5_animal_tissue_type_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-animal-tissue-type-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 136. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value | |
| Slice Name | value |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the time |
| Control | 1..1 |
| 138. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.url | |
| Control | 1..1 |
| Fixed Value | value |
| 140. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the time |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 142. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation | |
| Slice Name | supportingInformation |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Extra information about the withdrawal period |
| Control | 0..1 |
| 144. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.url | |
| Control | 1..1 |
| Fixed Value | supportingInformation |
| 146. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Extra information about the withdrawal period |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 148. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.url | |
| Control | 1..1 |
| Fixed Value | withdrawalPeriod |
| 150. Extension.extension:routeOfAdministration.extension:targetSpecies.url | |
| Control | 1..1 |
| Fixed Value | targetSpecies |
| 152. Extension.extension:routeOfAdministration.url | |
| Control | 1..1 |
| Fixed Value | routeOfAdministration |
| 154. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-AdministrableProductDefinition |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | A medicinal product in the final form which is suitable for administering to a patient (after any mixing of multiple components, dissolution etc. has been performed). Optional Extension Element - found in all resources. |
| Short | A medicinal product in the final form, suitable for administration - after any mixing of multiple componentsOptional Extensions Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 20..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and ClosedOpen, and can be differentiated using the following discriminators: |
| 4. Extension.extension:status | |
| Slice Name | status |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
| Short | draft | active | retired | unknownAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 6. Extension.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 8. Extension.extension:status.value[x] | |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | draft | active | retired | unknownValue of extension |
| Control | 0..1 |
| Binding | The codes SHALL be taken from For codes, see R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | code, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 10. Extension.extension:formOf | |
| Slice Name | formOf |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable productAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 12. Extension.extension:formOf.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | formOf |
| 14. Extension.extension:formOf.value[x] | |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable productValue of extension |
| Control | 0..1 |
| Type | Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:administrableDoseForm | |
| Slice Name | administrableDoseForm |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
| Short | The dose form of the final product after necessary reconstitution or processingAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 18. Extension.extension:administrableDoseForm.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | administrableDoseForm |
| 20. Extension.extension:administrableDoseForm.value[x] | |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The dose form of the final product after necessary reconstitution or processingValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_administrable_dose_form_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-administrable-dose-form-for-R4|0.0.1-snapshot-2)Dose form for a medication, in the form suitable for administering to the patient, after mixing, where necessary. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 22. Extension.extension:unitOfPresentation | |
| Slice Name | unitOfPresentation |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff'Additional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 24. Extension.extension:unitOfPresentation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | unitOfPresentation |
| 26. Extension.extension:unitOfPresentation.value[x] | |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff'Value of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_unit_of_presentation_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-unit-of-presentation-for-R4|0.0.1-snapshot-2)The presentation type in which an administrable medicinal product is given to a patient. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 28. Extension.extension:producedFrom | |
| Slice Name | producedFrom |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable formAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 30. Extension.extension:producedFrom.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | producedFrom |
| 32. Extension.extension:producedFrom.value[x] | |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable formValue of extension |
| Control | 0..1 |
| Type | Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 34. Extension.extension:ingredient | |
| Slice Name | ingredient |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resourceAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 36. Extension.extension:ingredient.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | ingredient |
| 38. Extension.extension:ingredient.value[x] | |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resourceValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_substance_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-substance-codes-for-R4|0.0.1-snapshot-2)This value set includes all substance codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 40. Extension.extension:device | |
| Slice Name | device |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal productAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 42. Extension.extension:device.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | device |
| 44. Extension.extension:device.value[x] | |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal productValue of extension |
| Control | 0..1 |
| Type | Reference, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:description | |
| Slice Name | description |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowedAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 48. Extension.extension:description.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | description |
| 50. Extension.extension:description.value[x] | |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowedValue of extension |
| Control | 0..1 |
| Type | markdown, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 52. Extension.extension:property | |
| Slice Name | property |
| Definition | This cross-version extension represents AdministrableProductDefinition.property from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Characteristics e.g. a product's onset of actionAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 54. Extension.extension:property.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and ClosedOpen, and can be differentiated using the following discriminators: |
| 56. Extension.extension:property.extension:type | |
| Slice Name | type |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A code expressing the type of characteristicAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 58. Extension.extension:property.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 60. Extension.extension:property.extension:type.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A code expressing the type of characteristicValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_product_characteristic_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-product-characteristic-codes-for-R4|0.0.1-snapshot-2)This value set includes all observable entity codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 62. Extension.extension:property.extension:value[x] | |
| Slice Name | value[x] |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the characteristicAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 64. Extension.extension:property.extension:value[x].url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value[x] |
| 66. Extension.extension:property.extension:value[x].value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A value for the characteristicValue of extension |
| Control | 0..1 |
| Type | Choice of: CodeableConcept, Quantity, date, boolean, markdown, Attachment, Reference, Meta, Address, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, Ratio, Age, TriggerDefinition, uri, url, Annotation, ContactDetail, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 68. Extension.extension:property.extension:status | |
| Slice Name | status |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The status of characteristic e.g. assigned or pendingAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 70. Extension.extension:property.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 72. Extension.extension:property.extension:status.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The status of characteristic e.g. assigned or pendingValue of extension |
| Control | 0..1 |
| Binding | The codes SHALL be taken from For codes, see R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 74. Extension.extension:property.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | property |
| 76. Extension.extension:routeOfAdministration | |
| Slice Name | routeOfAdministration |
| Definition | The path by which the product is taken into or makes contact with the body. In some regions this is referred to as the licenced or approved route. RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa). |
| Short | The path by which the product is taken into or makes contact with the bodyAdditional content defined by implementations |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 78. Extension.extension:routeOfAdministration.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and ClosedOpen, and can be differentiated using the following discriminators: |
| 80. Extension.extension:routeOfAdministration.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the routeAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 82. Extension.extension:routeOfAdministration.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 84. Extension.extension:routeOfAdministration.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Coded expression for the routeValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_route_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-route-codes-for-R4|0.0.1-snapshot-2)A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:routeOfAdministration.extension:firstDose | |
| Slice Name | firstDose |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
| Short | The first dose (dose quantity) administered can be specified for the productAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 88. Extension.extension:routeOfAdministration.extension:firstDose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | firstDose |
| 90. Extension.extension:routeOfAdministration.extension:firstDose.value[x] | |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The first dose (dose quantity) administered can be specified for the productValue of extension |
| Control | 0..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 92. Extension.extension:routeOfAdministration.extension:maxSingleDose | |
| Slice Name | maxSingleDose |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
| Short | The maximum single dose that can be administeredAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 94. Extension.extension:routeOfAdministration.extension:maxSingleDose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxSingleDose |
| 96. Extension.extension:routeOfAdministration.extension:maxSingleDose.value[x] | |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The maximum single dose that can be administeredValue of extension |
| Control | 0..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 98. Extension.extension:routeOfAdministration.extension:maxDosePerDay | |
| Slice Name | maxDosePerDay |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
| Short | The maximum dose quantity to be administered in any one 24-h periodAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 100. Extension.extension:routeOfAdministration.extension:maxDosePerDay.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxDosePerDay |
| 102. Extension.extension:routeOfAdministration.extension:maxDosePerDay.value[x] | |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The maximum dose quantity to be administered in any one 24-h periodValue of extension |
| Control | 0..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 104. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod | |
| Slice Name | maxDosePerTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum dose per treatment period that can be administeredAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 106. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxDosePerTreatmentPeriod |
| 108. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The maximum dose per treatment period that can be administeredValue of extension |
| Control | 0..1 |
| Type | Ratio, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 110. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod | |
| Slice Name | maxTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum treatment period during which the product can be administeredAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 112. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxTreatmentPeriod |
| 114. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The maximum treatment period during which the product can be administeredValue of extension |
| Control | 0..1 |
| Type | Duration, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 116. Extension.extension:routeOfAdministration.extension:targetSpecies | |
| Slice Name | targetSpecies |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species for which this route appliesAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 118. Extension.extension:routeOfAdministration.extension:targetSpecies.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and ClosedOpen, and can be differentiated using the following discriminators: |
| 120. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the speciesAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 122. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 124. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Coded expression for the speciesValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_target_species_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-target-species-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 126. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod | |
| Slice Name | withdrawalPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species specific time during which consumption of animal product is not appropriateAdditional content defined by implementations |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 128. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 20..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and ClosedOpen, and can be differentiated using the following discriminators: |
| 130. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue | |
| Slice Name | tissue |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milkAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 132. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | tissue |
| 134. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.value[x] | |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milkValue of extension |
| Control | 0..1 |
| Binding | For example codes, see For codes, see R5_animal_tissue_type_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-animal-tissue-type-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 136. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value | |
| Slice Name | value |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the timeAdditional content defined by implementations |
| Control | 10..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 138. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 140. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | A value for the timeValue of extension |
| Control | 0..1 |
| Type | Quantity, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, string, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 142. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation | |
| Slice Name | supportingInformation |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Extra information about the withdrawal periodAdditional content defined by implementations |
| Control | 0..1* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 144. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | supportingInformation |
| 146. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Extra information about the withdrawal periodValue of extension |
| Control | 0..1 |
| Type | string, date, Meta, Address, Attachment, integer, Count, DataRequirement, Dosage, uuid, Identifier, Coding, SampledData, id, positiveInt, Distance, Period, Duration, canonical, Range, RelatedArtifact, base64Binary, UsageContext, Timing, decimal, CodeableConcept, ParameterDefinition, dateTime, code, Contributor, oid, instant, ContactPoint, HumanName, Money, markdown, Ratio, Age, Reference, TriggerDefinition, Quantity, uri, url, Annotation, ContactDetail, boolean, Expression, Signature, unsignedInt, time |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 148. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | withdrawalPeriod |
| 150. Extension.extension:routeOfAdministration.extension:targetSpecies.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | targetSpecies |
| 152. Extension.extension:routeOfAdministration.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | routeOfAdministration |
| 154. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-AdministrableProductDefinition |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | A medicinal product in the final form which is suitable for administering to a patient (after any mixing of multiple components, dissolution etc. has been performed). |
| Short | A medicinal product in the final form, suitable for administration - after any mixing of multiple components |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 2..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 6. Extension.extension:status | |
| Slice Name | status |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
| Short | draft | active | retired | unknown |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 8. Extension.extension:status.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 10. Extension.extension:status.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 14. Extension.extension:status.value[x] | |
| Definition | The status of this administrable product. Enables tracking the life-cycle of the content. |
| Short | draft | active | retired | unknown |
| Control | 0..1 |
| Binding | The codes SHALL be taken from R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | code |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 16. Extension.extension:formOf | |
| Slice Name | formOf |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 18. Extension.extension:formOf.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 20. Extension.extension:formOf.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:formOf.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | formOf |
| 24. Extension.extension:formOf.value[x] | |
| Definition | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product. If this administrable product describes the administration of a crushed tablet, the 'formOf' would be the product representing a distribution containing tablets and possibly also a cream. This is distinct from the 'producedFrom' which refers to the specific components of the product that are used in this preparation, rather than the product as a whole. |
| Short | References a product from which one or more of the constituent parts of that product can be prepared and used as described by this administrable product |
| Control | 0..1 |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 26. Extension.extension:administrableDoseForm | |
| Slice Name | administrableDoseForm |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
| Short | The dose form of the final product after necessary reconstitution or processing |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 28. Extension.extension:administrableDoseForm.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 30. Extension.extension:administrableDoseForm.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:administrableDoseForm.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | administrableDoseForm |
| 34. Extension.extension:administrableDoseForm.value[x] | |
| Definition | The dose form of the final product after necessary reconstitution or processing. Contrasts to the manufactured dose form (see ManufacturedItemDefinition). If the manufactured form was 'powder for solution for injection', the administrable dose form could be 'solution for injection' (once mixed with another item having manufactured form 'solvent for solution for injection'). |
| Short | The dose form of the final product after necessary reconstitution or processing |
| Control | 0..1 |
| Binding | For example codes, see R5_administrable_dose_form_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-administrable-dose-form-for-R4|0.0.1-snapshot-2)Dose form for a medication, in the form suitable for administering to the patient, after mixing, where necessary. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 36. Extension.extension:unitOfPresentation | |
| Slice Name | unitOfPresentation |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 38. Extension.extension:unitOfPresentation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 40. Extension.extension:unitOfPresentation.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 42. Extension.extension:unitOfPresentation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | unitOfPresentation |
| 44. Extension.extension:unitOfPresentation.value[x] | |
| Definition | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' (as in 'contains 100 mcg per puff'), or for a liquid - 'vial' (as in 'contains 5 ml per vial'). |
| Short | The presentation type in which this item is given to a patient. e.g. for a spray - 'puff' |
| Control | 0..1 |
| Binding | For example codes, see R5_unit_of_presentation_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-unit-of-presentation-for-R4|0.0.1-snapshot-2)The presentation type in which an administrable medicinal product is given to a patient. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 46. Extension.extension:producedFrom | |
| Slice Name | producedFrom |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 48. Extension.extension:producedFrom.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 50. Extension.extension:producedFrom.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 52. Extension.extension:producedFrom.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | producedFrom |
| 54. Extension.extension:producedFrom.value[x] | |
| Definition | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form. In some cases, an administrable form might use all of the items from the overall product (or there might only be one item), while in other cases, an administrable form might use only a subset of the items available in the overall product. For example, an administrable form might involve combining a liquid and a powder available as part of an overall product, but not involve applying the also supplied cream. |
| Short | Indicates the specific manufactured items that are part of the 'formOf' product that are used in the preparation of this specific administrable form |
| Control | 0..1 |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 56. Extension.extension:ingredient | |
| Slice Name | ingredient |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 58. Extension.extension:ingredient.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 60. Extension.extension:ingredient.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 62. Extension.extension:ingredient.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | ingredient |
| 64. Extension.extension:ingredient.value[x] | |
| Definition | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton (via AdministrableProductDefinition.producedFrom) to state which component items are used to make this, or using by incoming references from the Ingredient resource, to state in detail which substances exist within this. This element allows a basic coded ingredient to be used. |
| Short | The ingredients of this administrable medicinal product. This is only needed if the ingredients are not specified either using ManufacturedItemDefiniton, or using by incoming references from the Ingredient resource |
| Control | 0..1 |
| Binding | For example codes, see R5_substance_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-substance-codes-for-R4|0.0.1-snapshot-2)This value set includes all substance codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 66. Extension.extension:device | |
| Slice Name | device |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 68. Extension.extension:device.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 70. Extension.extension:device.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 72. Extension.extension:device.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | device |
| 74. Extension.extension:device.value[x] | |
| Definition | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product. This is not intended for devices that are just co-packaged. |
| Short | A device that is integral to the medicinal product, in effect being considered as an "ingredient" of the medicinal product |
| Control | 0..1 |
| Type | Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 76. Extension.extension:description | |
| Slice Name | description |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 78. Extension.extension:description.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 80. Extension.extension:description.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 82. Extension.extension:description.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | description |
| 84. Extension.extension:description.value[x] | |
| Definition | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed. Intended to be used when the other structured properties of this resource are insufficient or cannot be supported. It is not intended to duplicate information already carried elswehere. |
| Short | A general description of the product, when in its final form, suitable for administration e.g. effervescent blue liquid, to be swallowed |
| Control | 0..1 |
| Type | markdown |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 86. Extension.extension:property | |
| Slice Name | property |
| Definition | This cross-version extension represents AdministrableProductDefinition.property from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Characteristics e.g. a product's onset of action |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 88. Extension.extension:property.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 90. Extension.extension:property.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 92. Extension.extension:property.extension:type | |
| Slice Name | type |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A code expressing the type of characteristic |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 94. Extension.extension:property.extension:type.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 96. Extension.extension:property.extension:type.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 98. Extension.extension:property.extension:type.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | type |
| 100. Extension.extension:property.extension:type.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.type from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A code expressing the type of characteristic |
| Control | 0..1 |
| Binding | For example codes, see R5_product_characteristic_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-product-characteristic-codes-for-R4|0.0.1-snapshot-2)This value set includes all observable entity codes from SNOMED CT - provided as an exemplar value set. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 102. Extension.extension:property.extension:value[x] | |
| Slice Name | value[x] |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the characteristic |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 104. Extension.extension:property.extension:value[x].id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 106. Extension.extension:property.extension:value[x].extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 108. Extension.extension:property.extension:value[x].url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value[x] |
| 110. Extension.extension:property.extension:value[x].value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.value[x] from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the characteristic |
| Control | 0..1 |
| Type | Choice of: CodeableConcept, Quantity, date, boolean, markdown, Attachment, Reference |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 112. Extension.extension:property.extension:status | |
| Slice Name | status |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The status of characteristic e.g. assigned or pending |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 114. Extension.extension:property.extension:status.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 116. Extension.extension:property.extension:status.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 118. Extension.extension:property.extension:status.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | status |
| 120. Extension.extension:property.extension:status.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.property.status from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The status of characteristic e.g. assigned or pending |
| Control | 0..1 |
| Binding | The codes SHALL be taken from R5_publication_status_for_R4 (0.0.1-snapshot-2) (required to http://hl7.org/fhir/5.0/ValueSet/R5-publication-status-for-R4|0.0.1-snapshot-2)The lifecycle status of an artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 122. Extension.extension:property.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | property |
| 124. Extension.extension:property.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 126. Extension.extension:routeOfAdministration | |
| Slice Name | routeOfAdministration |
| Definition | The path by which the product is taken into or makes contact with the body. In some regions this is referred to as the licenced or approved route. RouteOfAdministration cannot be used when the 'formOf' product already uses MedicinalProductDefinition.route (and vice versa). |
| Short | The path by which the product is taken into or makes contact with the body |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 128. Extension.extension:routeOfAdministration.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 130. Extension.extension:routeOfAdministration.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 132. Extension.extension:routeOfAdministration.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the route |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 134. Extension.extension:routeOfAdministration.extension:code.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 136. Extension.extension:routeOfAdministration.extension:code.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 138. Extension.extension:routeOfAdministration.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 140. Extension.extension:routeOfAdministration.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the route |
| Control | 0..1 |
| Binding | For example codes, see R5_route_codes_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-route-codes-for-R4|0.0.1-snapshot-2)A code specifying the route or physiological path of administration of a therapeutic agent into or onto a patient's body. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 142. Extension.extension:routeOfAdministration.extension:firstDose | |
| Slice Name | firstDose |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
| Short | The first dose (dose quantity) administered can be specified for the product |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 144. Extension.extension:routeOfAdministration.extension:firstDose.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 146. Extension.extension:routeOfAdministration.extension:firstDose.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 148. Extension.extension:routeOfAdministration.extension:firstDose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | firstDose |
| 150. Extension.extension:routeOfAdministration.extension:firstDose.value[x] | |
| Definition | The first dose (dose quantity) administered can be specified for the product, using a numerical value and its unit of measurement. |
| Short | The first dose (dose quantity) administered can be specified for the product |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 152. Extension.extension:routeOfAdministration.extension:maxSingleDose | |
| Slice Name | maxSingleDose |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
| Short | The maximum single dose that can be administered |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 154. Extension.extension:routeOfAdministration.extension:maxSingleDose.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 156. Extension.extension:routeOfAdministration.extension:maxSingleDose.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 158. Extension.extension:routeOfAdministration.extension:maxSingleDose.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxSingleDose |
| 160. Extension.extension:routeOfAdministration.extension:maxSingleDose.value[x] | |
| Definition | The maximum single dose that can be administered, specified using a numerical value and its unit of measurement. |
| Short | The maximum single dose that can be administered |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 162. Extension.extension:routeOfAdministration.extension:maxDosePerDay | |
| Slice Name | maxDosePerDay |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
| Short | The maximum dose quantity to be administered in any one 24-h period |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 164. Extension.extension:routeOfAdministration.extension:maxDosePerDay.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 166. Extension.extension:routeOfAdministration.extension:maxDosePerDay.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 168. Extension.extension:routeOfAdministration.extension:maxDosePerDay.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxDosePerDay |
| 170. Extension.extension:routeOfAdministration.extension:maxDosePerDay.value[x] | |
| Definition | The maximum dose per day (maximum dose quantity to be administered in any one 24-h period) that can be administered. |
| Short | The maximum dose quantity to be administered in any one 24-h period |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 172. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod | |
| Slice Name | maxDosePerTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum dose per treatment period that can be administered |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 174. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 176. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 178. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxDosePerTreatmentPeriod |
| 180. Extension.extension:routeOfAdministration.extension:maxDosePerTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxDosePerTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum dose per treatment period that can be administered |
| Control | 0..1 |
| Type | Ratio |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 182. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod | |
| Slice Name | maxTreatmentPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum treatment period during which the product can be administered |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 184. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 186. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 188. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | maxTreatmentPeriod |
| 190. Extension.extension:routeOfAdministration.extension:maxTreatmentPeriod.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.maxTreatmentPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | The maximum treatment period during which the product can be administered |
| Control | 0..1 |
| Type | Duration |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 192. Extension.extension:routeOfAdministration.extension:targetSpecies | |
| Slice Name | targetSpecies |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species for which this route applies |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 194. Extension.extension:routeOfAdministration.extension:targetSpecies.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 196. Extension.extension:routeOfAdministration.extension:targetSpecies.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 198. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code | |
| Slice Name | code |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the species |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 200. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 202. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 204. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | code |
| 206. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:code.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.code from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Coded expression for the species |
| Control | 0..1 |
| Binding | For example codes, see R5_target_species_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-target-species-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 208. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod | |
| Slice Name | withdrawalPeriod |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A species specific time during which consumption of animal product is not appropriate |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 210. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 212. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 2..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension. The slices areUnordered and Closed, and can be differentiated using the following discriminators: |
| 214. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue | |
| Slice Name | tissue |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milk |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 216. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 218. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 220. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | tissue |
| 222. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:tissue.value[x] | |
| Definition | Coded expression for the type of tissue for which the withdrawal period applies, e.g. meat, milk. |
| Short | The type of tissue for which the withdrawal period applies, e.g. meat, milk |
| Control | 0..1 |
| Binding | For example codes, see R5_animal_tissue_type_for_R4 (0.0.1-snapshot-2) (example to http://hl7.org/fhir/5.0/ValueSet/R5-animal-tissue-type-for-R4|0.0.1-snapshot-2)A tissue type of an animal. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 224. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value | |
| Slice Name | value |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the time |
| Control | 1..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 226. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 228. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 230. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | value |
| 232. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:value.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.value from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | A value for the time |
| Control | 0..1 |
| Type | Quantity |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 234. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation | |
| Slice Name | supportingInformation |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Extra information about the withdrawal period |
| Control | 0..1 |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 236. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.id | |
| Definition | Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | Unique id for inter-element referencing |
| Control | 0..1 |
| Type | string |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| 238. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Is Modifier | false |
| Summary | false |
| Alternate Names | extensions, user content |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| Slicing | This element introduces a set of slices on Extension.extension.extension.extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 240. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | supportingInformation |
| 242. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.extension:supportingInformation.value[x] | |
| Definition | This cross-version extension represents AdministrableProductDefinition.routeOfAdministration.targetSpecies.withdrawalPeriod.supportingInformation from http://hl7.org/fhir/StructureDefinition/AdministrableProductDefinition|5.0.0 for use in FHIR R4. |
| Short | Extra information about the withdrawal period |
| Control | 0..1 |
| Type | string |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 244. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | withdrawalPeriod |
| 246. Extension.extension:routeOfAdministration.extension:targetSpecies.extension:withdrawalPeriod.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 248. Extension.extension:routeOfAdministration.extension:targetSpecies.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | targetSpecies |
| 250. Extension.extension:routeOfAdministration.extension:targetSpecies.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 252. Extension.extension:routeOfAdministration.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | routeOfAdministration |
| 254. Extension.extension:routeOfAdministration.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
| 256. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Is Modifier | false |
| XML Format | In the XML format, this property is represented as an attribute. |
| Summary | false |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-AdministrableProductDefinition |
| 258. Extension.value[x] | |
| Definition | Value of extension - must be one of a constrained set of the data types (see Extensibility for a list). |
| Short | Value of extension |
| Control | 0..1 |
| Type | Choice of: base64Binary, boolean, canonical, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, url, uuid, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, ContactDetail, Contributor, DataRequirement, Expression, ParameterDefinition, RelatedArtifact, TriggerDefinition, UsageContext, Dosage, Meta |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Is Modifier | false |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| Summary | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count())) |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r5.r4#0.0.1-snapshot-2 based on FHIR 4.0.1. Generated 2025-09-13
Links: Table of Contents |
QA Report
| Version History |
|
History