Profile_R5_SpecimenDefinition_R3 - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R5_SpecimenDefinition_R3 - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-SpecimenDefinition resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (`contained.text.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (`contained.where(('#'+id in %resource.descendants().reference).not()).empty()`) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.
Control	0..1
Type	uri
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:url
Slice Name	url
Definition	R5: `SpecimenDefinition.url` (new:uri)
Short	R5: Logical canonical URL to reference this SpecimenDefinition (globally unique) (new)
Comments	Element `SpecimenDefinition.url` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.url`: `http://hl7.org/fhir/StructureDefinition/artifact-url`. Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. This is the URI that will be used when making canonical references to this resource.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-url`)
8. Basic.extension:version
Slice Name	version
Definition	R5: `SpecimenDefinition.version` (new:string)
Short	R5: Business version of the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.version` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.version`: `http://hl7.org/fhir/StructureDefinition/artifact-version`. There may be multiple different instances of a SpecimenDefinition that have the same identifier but different versions.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-version`)
10. Basic.extension:versionAlgorithm
Slice Name	versionAlgorithm
Definition	R5: `SpecimenDefinition.versionAlgorithm[x]` (new:Coding, string)
Short	R5: How to compare versions (new)
Comments	Element `SpecimenDefinition.versionAlgorithm[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.versionAlgorithm[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.versionAlgorithm[x]`: `http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm`. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm`)
12. Basic.extension:name
Slice Name	name
Definition	R5: `SpecimenDefinition.name` (new:string)
Short	R5: Name for this {{title}} (computer friendly) (new)
Comments	Element `SpecimenDefinition.name` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.name`: `http://hl7.org/fhir/StructureDefinition/artifact-name`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-name`)
14. Basic.extension:title
Slice Name	title
Definition	R5: `SpecimenDefinition.title` (new:string)
Short	R5: Name for this SpecimenDefinition (Human friendly) (new)
Comments	Element `SpecimenDefinition.title` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.title`: `http://hl7.org/fhir/StructureDefinition/artifact-title`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-title`)
16. Basic.extension:derivedFromCanonical
Slice Name	derivedFromCanonical
Definition	R5: `SpecimenDefinition.derivedFromCanonical` (new:canonical(SpecimenDefinition))
Short	R5: Based on FHIR definition of another SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Based on FHIR definition of another SpecimenDefinition (new)) (Extension Type: uri(Cross-version Profile for R5.SpecimenDefinition for use in FHIR STU3, Basic))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Basic.extension:derivedFromUri
Slice Name	derivedFromUri
Definition	R5: `SpecimenDefinition.derivedFromUri` (new:uri)
Short	R5: Based on external definition (new)
Comments	Element `SpecimenDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Based on external definition (new)) (Extension Type: uri)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Basic.extension:experimental
Slice Name	experimental
Definition	R5: `SpecimenDefinition.experimental` (new:boolean)
Short	R5: If this SpecimenDefinition is not for real usage (new)
Comments	Element `SpecimenDefinition.experimental` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.experimental`: `http://hl7.org/fhir/StructureDefinition/artifact-experimental`. Allows filtering of SpecimenDefinition that are appropriate for use vs. not.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-experimental`)
22. Basic.extension:subject
Slice Name	subject
Definition	R5: `SpecimenDefinition.subject[x]` (new:CodeableConcept, Reference(Group))
Short	R5: Type of subject for specimen collection (new)
Comments	Element `SpecimenDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Examples: person, animal, device, water ….
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Type of subject for specimen collection (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R5.Group for use in FHIR STU3, Group))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
24. Basic.extension:date
Slice Name	date
Definition	R5: `SpecimenDefinition.date` (new:dateTime)
Short	R5: Date status first applied (new)
Comments	Element `SpecimenDefinition.date` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.date`: `http://hl7.org/fhir/StructureDefinition/artifact-date`. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-date`)
26. Basic.extension:publisher
Slice Name	publisher
Definition	R5: `SpecimenDefinition.publisher` (new:string)
Short	R5: The name of the individual or organization that published the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.publisher` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.publisher`: `http://hl7.org/fhir/StructureDefinition/artifact-publisher`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-publisher`)
28. Basic.extension:contact
Slice Name	contact
Definition	R5: `SpecimenDefinition.contact` (new:ContactDetail)
Short	R5: Contact details for the publisher (new)
Comments	Element `SpecimenDefinition.contact` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.contact`: `http://hl7.org/fhir/StructureDefinition/artifact-contact`. May be a web site, an email address, a telephone number, etc. See guidance around (not) making local changes to elements here.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-contact`)
30. Basic.extension:description
Slice Name	description
Definition	R5: `SpecimenDefinition.description` (new:markdown)
Short	R5: Natural language description of the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.description`: `http://hl7.org/fhir/StructureDefinition/artifact-description`. This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the module as conveyed in the text field of the resource itself. This item SHOULD be populated unless the information is available from context.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-description`)
32. Basic.extension:useContext
Slice Name	useContext
Definition	R5: `SpecimenDefinition.useContext` (new:UsageContext)
Short	R5: Content intends to support these contexts (new)
Comments	Element `SpecimenDefinition.useContext` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.useContext`: `http://hl7.org/fhir/StructureDefinition/artifact-useContext`. When multiple usageContexts are specified, there is no expectation for whether all or any of the contexts apply.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-useContext`)
34. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	R5: `SpecimenDefinition.jurisdiction` (new:CodeableConcept)
Short	R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)
Comments	Element `SpecimenDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Element `SpecimenDefinition.jurisdiction` has been flagged as deprecated. DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Basic.extension:purpose
Slice Name	purpose
Definition	R5: `SpecimenDefinition.purpose` (new:markdown)
Short	R5: Why this SpecimenDefinition is defined (new)
Comments	Element `SpecimenDefinition.purpose` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.purpose`: `http://hl7.org/fhir/StructureDefinition/artifact-purpose`. This element does not describe the usage of the SpecimenDefinition. Rather it is for traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this SpecimenDefinition.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-purpose`)
38. Basic.extension:copyright
Slice Name	copyright
Definition	R5: `SpecimenDefinition.copyright` (new:markdown)
Short	R5: Use and/or publishing restrictions (new)
Comments	Element `SpecimenDefinition.copyright` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.copyright`: `http://hl7.org/fhir/StructureDefinition/artifact-copyright`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-copyright`)
40. Basic.extension:copyrightLabel
Slice Name	copyrightLabel
Definition	R5: `SpecimenDefinition.copyrightLabel` (new:string)
Short	R5: Copyright holder and year(s) (new)
Comments	Element `SpecimenDefinition.copyrightLabel` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.copyrightLabel` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.copyrightLabel`: `http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel`. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel`)
42. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R5: `SpecimenDefinition.approvalDate` (new:date)
Short	R5: When SpecimenDefinition was approved by publisher (new)
Comments	Element `SpecimenDefinition.approvalDate` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.approvalDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.approvalDate`: `http://hl7.org/fhir/StructureDefinition/artifact-approvalDate`. The date may be more recent than the approval date because of minor changes / editorial corrections. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-approvalDate`)
44. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R5: `SpecimenDefinition.lastReviewDate` (new:date)
Short	R5: The date on which the asset content was last reviewed by the publisher (new)
Comments	Element `SpecimenDefinition.lastReviewDate` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.lastReviewDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.lastReviewDate`: `http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate`. If specified, this is usually after the approval date. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate`)
46. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	R5: `SpecimenDefinition.effectivePeriod` (new:Period)
Short	R5: The effective date range for the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.effectivePeriod` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.effectivePeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.effectivePeriod`: `http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod`. The effective period for a SpecimenDefinition determines when the content is applicable for usage and is independent of publication and review dates. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod`)
48. Basic.extension:typeCollected
Slice Name	typeCollected
Definition	R5: `SpecimenDefinition.typeCollected` (new:CodeableConcept)
Short	R5: Kind of material to collect (new)
Comments	Element `SpecimenDefinition.typeCollected` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeCollected` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Kind of material to collect (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
50. Basic.extension:patientPreparation
Slice Name	patientPreparation
Definition	R5: `SpecimenDefinition.patientPreparation` (new:CodeableConcept)
Short	R5: Patient preparation for collection (new)
Comments	Element `SpecimenDefinition.patientPreparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.patientPreparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Patient preparation for collection (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
52. Basic.extension:timeAspect
Slice Name	timeAspect
Definition	R5: `SpecimenDefinition.timeAspect` (new:string)
Short	R5: Time aspect for collection (new)
Comments	Element `SpecimenDefinition.timeAspect` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.timeAspect` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Time aspect for collection (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Basic.extension:collection
Slice Name	collection
Definition	R5: `SpecimenDefinition.collection` (new:CodeableConcept)
Short	R5: Specimen collection procedure (new)
Comments	Element `SpecimenDefinition.collection` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.collection` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Specimen collection procedure (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
56. Basic.extension:typeTested
Slice Name	typeTested
Definition	R5: `SpecimenDefinition.typeTested` (new:BackboneElement)
Short	R5: Specimen in container intended for testing by lab (new)
Comments	Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Specimen in container intended for testing by lab (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Basic.modifierExtension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.
Short	ExtensionExtensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
60. Basic.modifierExtension:status
Slice Name	status
Definition	R5: `SpecimenDefinition.status` (new:code)
Short	R5: draft \| active \| retired \| unknown (new)
Comments	Element `SpecimenDefinition.status` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.status`: `http://hl7.org/fhir/StructureDefinition/artifact-status`. A nominal state-transition diagram can be found in the Definition pattern documentation Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is. See guidance around (not) making local changes to elements here.
Control	1..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-status`)
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
62. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2`) Codes for identifying types of resources not yet defined by FHIR
Type	CodeableConcept
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:url
Slice Name	url
Definition	R5: `SpecimenDefinition.url` (new:uri)
Short	R5: Logical canonical URL to reference this SpecimenDefinition (globally unique) (new)
Comments	Element `SpecimenDefinition.url` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.url` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.url`: `http://hl7.org/fhir/StructureDefinition/artifact-url`. Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. This is the URI that will be used when making canonical references to this resource.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-url`)
6. Basic.extension:version
Slice Name	version
Definition	R5: `SpecimenDefinition.version` (new:string)
Short	R5: Business version of the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.version` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.version`: `http://hl7.org/fhir/StructureDefinition/artifact-version`. There may be multiple different instances of a SpecimenDefinition that have the same identifier but different versions.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-version`)
8. Basic.extension:versionAlgorithm
Slice Name	versionAlgorithm
Definition	R5: `SpecimenDefinition.versionAlgorithm[x]` (new:Coding, string)
Short	R5: How to compare versions (new)
Comments	Element `SpecimenDefinition.versionAlgorithm[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.versionAlgorithm[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.versionAlgorithm[x]`: `http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm`. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm`)
10. Basic.extension:name
Slice Name	name
Definition	R5: `SpecimenDefinition.name` (new:string)
Short	R5: Name for this {{title}} (computer friendly) (new)
Comments	Element `SpecimenDefinition.name` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.name` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.name`: `http://hl7.org/fhir/StructureDefinition/artifact-name`. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-name`)
12. Basic.extension:title
Slice Name	title
Definition	R5: `SpecimenDefinition.title` (new:string)
Short	R5: Name for this SpecimenDefinition (Human friendly) (new)
Comments	Element `SpecimenDefinition.title` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.title` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.title`: `http://hl7.org/fhir/StructureDefinition/artifact-title`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-title`)
14. Basic.extension:derivedFromCanonical
Slice Name	derivedFromCanonical
Definition	R5: `SpecimenDefinition.derivedFromCanonical` (new:canonical(SpecimenDefinition))
Short	R5: Based on FHIR definition of another SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.derivedFromCanonical` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.derivedFromCanonical` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Based on FHIR definition of another SpecimenDefinition (new)) (Extension Type: uri(Cross-version Profile for R5.SpecimenDefinition for use in FHIR STU3, Basic))
16. Basic.extension:derivedFromUri
Slice Name	derivedFromUri
Definition	R5: `SpecimenDefinition.derivedFromUri` (new:uri)
Short	R5: Based on external definition (new)
Comments	Element `SpecimenDefinition.derivedFromUri` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.derivedFromUri` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Based on external definition (new)) (Extension Type: uri)
18. Basic.extension:experimental
Slice Name	experimental
Definition	R5: `SpecimenDefinition.experimental` (new:boolean)
Short	R5: If this SpecimenDefinition is not for real usage (new)
Comments	Element `SpecimenDefinition.experimental` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.experimental` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.experimental`: `http://hl7.org/fhir/StructureDefinition/artifact-experimental`. Allows filtering of SpecimenDefinition that are appropriate for use vs. not.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-experimental`)
20. Basic.extension:subject
Slice Name	subject
Definition	R5: `SpecimenDefinition.subject[x]` (new:CodeableConcept, Reference(Group))
Short	R5: Type of subject for specimen collection (new)
Comments	Element `SpecimenDefinition.subject[x]` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.subject[x]` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Examples: person, animal, device, water ….
Control	0..1
Type	Extension(R5: Type of subject for specimen collection (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R5.Group for use in FHIR STU3, Group))
22. Basic.extension:date
Slice Name	date
Definition	R5: `SpecimenDefinition.date` (new:dateTime)
Short	R5: Date status first applied (new)
Comments	Element `SpecimenDefinition.date` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.date` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.date`: `http://hl7.org/fhir/StructureDefinition/artifact-date`. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-date`)
24. Basic.extension:publisher
Slice Name	publisher
Definition	R5: `SpecimenDefinition.publisher` (new:string)
Short	R5: The name of the individual or organization that published the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.publisher` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.publisher` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.publisher`: `http://hl7.org/fhir/StructureDefinition/artifact-publisher`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-publisher`)
26. Basic.extension:contact
Slice Name	contact
Definition	R5: `SpecimenDefinition.contact` (new:ContactDetail)
Short	R5: Contact details for the publisher (new)
Comments	Element `SpecimenDefinition.contact` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.contact`: `http://hl7.org/fhir/StructureDefinition/artifact-contact`. May be a web site, an email address, a telephone number, etc. See guidance around (not) making local changes to elements here.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-contact`)
28. Basic.extension:description
Slice Name	description
Definition	R5: `SpecimenDefinition.description` (new:markdown)
Short	R5: Natural language description of the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.description` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.description`: `http://hl7.org/fhir/StructureDefinition/artifact-description`. This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the module as conveyed in the text field of the resource itself. This item SHOULD be populated unless the information is available from context.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-description`)
30. Basic.extension:useContext
Slice Name	useContext
Definition	R5: `SpecimenDefinition.useContext` (new:UsageContext)
Short	R5: Content intends to support these contexts (new)
Comments	Element `SpecimenDefinition.useContext` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.useContext` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.useContext`: `http://hl7.org/fhir/StructureDefinition/artifact-useContext`. When multiple usageContexts are specified, there is no expectation for whether all or any of the contexts apply.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-useContext`)
32. Basic.extension:jurisdiction
Slice Name	jurisdiction
Definition	R5: `SpecimenDefinition.jurisdiction` (new:CodeableConcept)
Short	R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)
Comments	Element `SpecimenDefinition.jurisdiction` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.jurisdiction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Element `SpecimenDefinition.jurisdiction` has been flagged as deprecated. DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)
Control	0..*
Type	Extension(R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)) (Extension Type: CodeableConcept)
34. Basic.extension:purpose
Slice Name	purpose
Definition	R5: `SpecimenDefinition.purpose` (new:markdown)
Short	R5: Why this SpecimenDefinition is defined (new)
Comments	Element `SpecimenDefinition.purpose` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.purpose` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.purpose`: `http://hl7.org/fhir/StructureDefinition/artifact-purpose`. This element does not describe the usage of the SpecimenDefinition. Rather it is for traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this SpecimenDefinition.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-purpose`)
36. Basic.extension:copyright
Slice Name	copyright
Definition	R5: `SpecimenDefinition.copyright` (new:markdown)
Short	R5: Use and/or publishing restrictions (new)
Comments	Element `SpecimenDefinition.copyright` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.copyright` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.copyright`: `http://hl7.org/fhir/StructureDefinition/artifact-copyright`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-copyright`)
38. Basic.extension:copyrightLabel
Slice Name	copyrightLabel
Definition	R5: `SpecimenDefinition.copyrightLabel` (new:string)
Short	R5: Copyright holder and year(s) (new)
Comments	Element `SpecimenDefinition.copyrightLabel` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.copyrightLabel` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.copyrightLabel`: `http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel`. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel`)
40. Basic.extension:approvalDate
Slice Name	approvalDate
Definition	R5: `SpecimenDefinition.approvalDate` (new:date)
Short	R5: When SpecimenDefinition was approved by publisher (new)
Comments	Element `SpecimenDefinition.approvalDate` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.approvalDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.approvalDate`: `http://hl7.org/fhir/StructureDefinition/artifact-approvalDate`. The date may be more recent than the approval date because of minor changes / editorial corrections. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-approvalDate`)
42. Basic.extension:lastReviewDate
Slice Name	lastReviewDate
Definition	R5: `SpecimenDefinition.lastReviewDate` (new:date)
Short	R5: The date on which the asset content was last reviewed by the publisher (new)
Comments	Element `SpecimenDefinition.lastReviewDate` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.lastReviewDate` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.lastReviewDate`: `http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate`. If specified, this is usually after the approval date. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate`)
44. Basic.extension:effectivePeriod
Slice Name	effectivePeriod
Definition	R5: `SpecimenDefinition.effectivePeriod` (new:Period)
Short	R5: The effective date range for the SpecimenDefinition (new)
Comments	Element `SpecimenDefinition.effectivePeriod` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.effectivePeriod` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.effectivePeriod`: `http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod`. The effective period for a SpecimenDefinition determines when the content is applicable for usage and is independent of publication and review dates. See guidance around (not) making local changes to elements here.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod`)
46. Basic.extension:typeCollected
Slice Name	typeCollected
Definition	R5: `SpecimenDefinition.typeCollected` (new:CodeableConcept)
Short	R5: Kind of material to collect (new)
Comments	Element `SpecimenDefinition.typeCollected` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeCollected` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Kind of material to collect (new)) (Extension Type: CodeableConcept)
48. Basic.extension:patientPreparation
Slice Name	patientPreparation
Definition	R5: `SpecimenDefinition.patientPreparation` (new:CodeableConcept)
Short	R5: Patient preparation for collection (new)
Comments	Element `SpecimenDefinition.patientPreparation` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.patientPreparation` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Patient preparation for collection (new)) (Extension Type: CodeableConcept)
50. Basic.extension:timeAspect
Slice Name	timeAspect
Definition	R5: `SpecimenDefinition.timeAspect` (new:string)
Short	R5: Time aspect for collection (new)
Comments	Element `SpecimenDefinition.timeAspect` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.timeAspect` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Time aspect for collection (new)) (Extension Type: string)
52. Basic.extension:collection
Slice Name	collection
Definition	R5: `SpecimenDefinition.collection` (new:CodeableConcept)
Short	R5: Specimen collection procedure (new)
Comments	Element `SpecimenDefinition.collection` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.collection` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Specimen collection procedure (new)) (Extension Type: CodeableConcept)
54. Basic.extension:typeTested
Slice Name	typeTested
Definition	R5: `SpecimenDefinition.typeTested` (new:BackboneElement)
Short	R5: Specimen in container intended for testing by lab (new)
Comments	Element `SpecimenDefinition.typeTested` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.typeTested` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Specimen in container intended for testing by lab (new)) (Complex Extension)
56. Basic.modifierExtension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.modifierExtension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
58. Basic.modifierExtension:status
Slice Name	status
Definition	R5: `SpecimenDefinition.status` (new:code)
Short	R5: draft \| active \| retired \| unknown (new)
Comments	Element `SpecimenDefinition.status` is not mapped to FHIR STU3, since FHIR R5 `SpecimenDefinition` is not mapped. Element `SpecimenDefinition.status` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `SpecimenDefinition.status`: `http://hl7.org/fhir/StructureDefinition/artifact-status`. A nominal state-transition diagram can be found in the Definition pattern documentation Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is. See guidance around (not) making local changes to elements here.
Control	1..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-status`)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Summary true

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control 0..1

Type

uri

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

Unless not suitable, these codes SHALL be taken from Common Languages

(extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

A human language.

Additional Bindings

Purpose

Primitive Value This primitive element may be present, or absent, or replaced by an extension

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

Control 0..1
This element is affected by the following invariants: dom-1

Type

Narrative

Alternate Names narrative, html, xhtml, display

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Control 0..*

Type

Resource

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:url

Slice Name url

Definition

R5: SpecimenDefinition.url (new:uri)

Short R5: Logical canonical URL to reference this SpecimenDefinition (globally unique) (new)

Comments

Element SpecimenDefinition.url is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.url has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.url: http://hl7.org/fhir/StructureDefinition/artifact-url. Can be a urn:uuid: or a urn:oid:, but real http: addresses are preferred. This is the URI that will be used when making canonical references to this resource.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-url)

18. Basic.extension:version

Slice Name version

Definition

R5: SpecimenDefinition.version (new:string)

Short R5: Business version of the SpecimenDefinition (new)

Comments

Element SpecimenDefinition.version is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.version: http://hl7.org/fhir/StructureDefinition/artifact-version. There may be multiple different instances of a SpecimenDefinition that have the same identifier but different versions.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-version)

20. Basic.extension:versionAlgorithm

Slice Name versionAlgorithm

Definition

R5: SpecimenDefinition.versionAlgorithm[x] (new:Coding, string)

Short R5: How to compare versions (new)

Comments

Element SpecimenDefinition.versionAlgorithm[x] is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.versionAlgorithm[x] has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.versionAlgorithm[x]: http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm. If set as a string, this is a FHIRPath expression that has two additional context variables passed in - %version1 and %version2 and will return a negative number if version1 is newer, a positive number if version2 and a 0 if the version ordering can't be successfully be determined.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-versionAlgorithm)

22. Basic.extension:name

Slice Name name

Definition

R5: SpecimenDefinition.name (new:string)

Short R5: Name for this {{title}} (computer friendly) (new)

Comments

Element SpecimenDefinition.name is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.name has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.name: http://hl7.org/fhir/StructureDefinition/artifact-name. The name is not expected to be globally unique. The name should be a simple alphanumeric type name to ensure that it is machine-processing friendly.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-name)

24. Basic.extension:title

Slice Name title

Definition

R5: SpecimenDefinition.title (new:string)

Short R5: Name for this SpecimenDefinition (Human friendly) (new)

Comments

Element SpecimenDefinition.title is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.title has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.title: http://hl7.org/fhir/StructureDefinition/artifact-title.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-title)

26. Basic.extension:derivedFromCanonical

Slice Name derivedFromCanonical

Definition

R5: SpecimenDefinition.derivedFromCanonical (new:canonical(SpecimenDefinition))

Short R5: Based on FHIR definition of another SpecimenDefinition (new)

Comments

Element SpecimenDefinition.derivedFromCanonical is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.derivedFromCanonical has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Based on FHIR definition of another SpecimenDefinition (new)) (Extension Type: uri(Cross-version Profile for R5.SpecimenDefinition for use in FHIR STU3, Basic))

Is Modifier false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

28. Basic.extension:derivedFromUri

Slice Name derivedFromUri

Definition

R5: SpecimenDefinition.derivedFromUri (new:uri)

Short R5: Based on external definition (new)

Comments

Element SpecimenDefinition.derivedFromUri is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.derivedFromUri has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Based on external definition (new)) (Extension Type: uri)

Is Modifier false

30. Basic.extension:experimental

Slice Name experimental

Definition

R5: SpecimenDefinition.experimental (new:boolean)

Short R5: If this SpecimenDefinition is not for real usage (new)

Comments

Element SpecimenDefinition.experimental is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.experimental has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.experimental: http://hl7.org/fhir/StructureDefinition/artifact-experimental. Allows filtering of SpecimenDefinition that are appropriate for use vs. not.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-experimental)

32. Basic.extension:subject

Slice Name subject

Definition

R5: SpecimenDefinition.subject[x] (new:CodeableConcept, Reference(Group))

Short R5: Type of subject for specimen collection (new)

Comments

Element SpecimenDefinition.subject[x] is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.subject[x] has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Examples: person, animal, device, water ….

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Type of subject for specimen collection (new)) (Extension Type: Choice of: CodeableConcept, Reference(Cross-version Profile for R5.Group for use in FHIR STU3, Group))

Is Modifier false

34. Basic.extension:date

Slice Name date

Definition

R5: SpecimenDefinition.date (new:dateTime)

Short R5: Date status first applied (new)

Comments

Element SpecimenDefinition.date is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.date has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.date: http://hl7.org/fhir/StructureDefinition/artifact-date. See guidance around (not) making local changes to elements here.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-date)

36. Basic.extension:publisher

Slice Name publisher

Definition

R5: SpecimenDefinition.publisher (new:string)

Short R5: The name of the individual or organization that published the SpecimenDefinition (new)

Comments

Element SpecimenDefinition.publisher is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.publisher has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.publisher: http://hl7.org/fhir/StructureDefinition/artifact-publisher.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-publisher)

38. Basic.extension:contact

Slice Name contact

Definition

R5: SpecimenDefinition.contact (new:ContactDetail)

Short R5: Contact details for the publisher (new)

Comments

Element SpecimenDefinition.contact is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.contact: http://hl7.org/fhir/StructureDefinition/artifact-contact. May be a web site, an email address, a telephone number, etc.

See guidance around (not) making local changes to elements here.

Control 0..*

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-contact)

40. Basic.extension:description

Slice Name description

Definition

R5: SpecimenDefinition.description (new:markdown)

Short R5: Natural language description of the SpecimenDefinition (new)

Comments

Element SpecimenDefinition.description is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.description: http://hl7.org/fhir/StructureDefinition/artifact-description. This description can be used to capture details such as comments about misuse, instructions for clinical use and interpretation, literature references, examples from the paper world, etc. It is not a rendering of the module as conveyed in the text field of the resource itself. This item SHOULD be populated unless the information is available from context.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-description)

42. Basic.extension:useContext

Slice Name useContext

Definition

R5: SpecimenDefinition.useContext (new:UsageContext)

Short R5: Content intends to support these contexts (new)

Comments

Element SpecimenDefinition.useContext is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.useContext has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.useContext: http://hl7.org/fhir/StructureDefinition/artifact-useContext. When multiple usageContexts are specified, there is no expectation for whether all or any of the contexts apply.

Control 0..*

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-useContext)

44. Basic.extension:jurisdiction

Slice Name jurisdiction

Definition

R5: SpecimenDefinition.jurisdiction (new:CodeableConcept)

Short R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)

Comments

Element SpecimenDefinition.jurisdiction is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.jurisdiction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Element SpecimenDefinition.jurisdiction has been flagged as deprecated. DEPRECATION NOTE: For consistency, implementations are encouraged to migrate to using the new 'jurisdiction' code in the useContext element. (I.e. useContext.code indicating http://terminology.hl7.org/CodeSystem/usage-context-type#jurisdiction and useContext.valueCodeableConcept indicating the jurisdiction.)

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Intended jurisdiction for this SpecimenDefinition (if applicable) (new)) (Extension Type: CodeableConcept)

Is Modifier false

46. Basic.extension:purpose

Slice Name purpose

Definition

R5: SpecimenDefinition.purpose (new:markdown)

Short R5: Why this SpecimenDefinition is defined (new)

Comments

Element SpecimenDefinition.purpose is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.purpose has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.purpose: http://hl7.org/fhir/StructureDefinition/artifact-purpose. This element does not describe the usage of the SpecimenDefinition. Rather it is for traceability of ''why'' the resource is either needed or ''why'' it is defined as it is. This may be used to point to source materials or specifications that drove the structure of this SpecimenDefinition.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-purpose)

48. Basic.extension:copyright

Slice Name copyright

Definition

R5: SpecimenDefinition.copyright (new:markdown)

Short R5: Use and/or publishing restrictions (new)

Comments

Element SpecimenDefinition.copyright is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.copyright has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.copyright: http://hl7.org/fhir/StructureDefinition/artifact-copyright.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-copyright)

50. Basic.extension:copyrightLabel

Slice Name copyrightLabel

Definition

R5: SpecimenDefinition.copyrightLabel (new:string)

Short R5: Copyright holder and year(s) (new)

Comments

Element SpecimenDefinition.copyrightLabel is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.copyrightLabel has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.copyrightLabel: http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel. The (c) symbol should NOT be included in this string. It will be added by software when rendering the notation. Full details about licensing, restrictions, warrantees, etc. goes in the more general 'copyright' element.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-copyrightLabel)

52. Basic.extension:approvalDate

Slice Name approvalDate

Definition

R5: SpecimenDefinition.approvalDate (new:date)

Short R5: When SpecimenDefinition was approved by publisher (new)

Comments

Element SpecimenDefinition.approvalDate is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.approvalDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.approvalDate: http://hl7.org/fhir/StructureDefinition/artifact-approvalDate. The date may be more recent than the approval date because of minor changes / editorial corrections.

See guidance around (not) making local changes to elements here.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-approvalDate)

54. Basic.extension:lastReviewDate

Slice Name lastReviewDate

Definition

R5: SpecimenDefinition.lastReviewDate (new:date)

Short R5: The date on which the asset content was last reviewed by the publisher (new)

Comments

Element SpecimenDefinition.lastReviewDate is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.lastReviewDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.lastReviewDate: http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate. If specified, this is usually after the approval date.

See guidance around (not) making local changes to elements here.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-lastReviewDate)

56. Basic.extension:effectivePeriod

Slice Name effectivePeriod

Definition

R5: SpecimenDefinition.effectivePeriod (new:Period)

Short R5: The effective date range for the SpecimenDefinition (new)

Comments

Element SpecimenDefinition.effectivePeriod is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.effectivePeriod has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.effectivePeriod: http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod. The effective period for a SpecimenDefinition determines when the content is applicable for usage and is independent of publication and review dates.

See guidance around (not) making local changes to elements here.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-effectivePeriod)

58. Basic.extension:typeCollected

Slice Name typeCollected

Definition

R5: SpecimenDefinition.typeCollected (new:CodeableConcept)

Short R5: Kind of material to collect (new)

Comments

Element SpecimenDefinition.typeCollected is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.typeCollected has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Kind of material to collect (new)) (Extension Type: CodeableConcept)

Is Modifier false

60. Basic.extension:patientPreparation

Slice Name patientPreparation

Definition

R5: SpecimenDefinition.patientPreparation (new:CodeableConcept)

Short R5: Patient preparation for collection (new)

Comments

Element SpecimenDefinition.patientPreparation is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.patientPreparation has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Patient preparation for collection (new)) (Extension Type: CodeableConcept)

Is Modifier false

62. Basic.extension:timeAspect

Slice Name timeAspect

Definition

R5: SpecimenDefinition.timeAspect (new:string)

Short R5: Time aspect for collection (new)

Comments

Element SpecimenDefinition.timeAspect is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.timeAspect has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Time aspect for collection (new)) (Extension Type: string)

Is Modifier false

64. Basic.extension:collection

Slice Name collection

Definition

R5: SpecimenDefinition.collection (new:CodeableConcept)

Short R5: Specimen collection procedure (new)

Comments

Element SpecimenDefinition.collection is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.collection has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Specimen collection procedure (new)) (Extension Type: CodeableConcept)

Is Modifier false

66. Basic.extension:typeTested

Slice Name typeTested

Definition

R5: SpecimenDefinition.typeTested (new:BackboneElement)

Short R5: Specimen in container intended for testing by lab (new)

Comments

Element SpecimenDefinition.typeTested is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.typeTested has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Specimen in container intended for testing by lab (new)) (Complex Extension)

Is Modifier false

68. Basic.modifierExtension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Slicing

This element introduces a set of slices on Basic.modifierExtension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

70. Basic.modifierExtension:status

Slice Name status

Definition

R5: SpecimenDefinition.status (new:code)

Short R5: draft | active | retired | unknown (new)

Comments

Element SpecimenDefinition.status is not mapped to FHIR STU3, since FHIR R5 SpecimenDefinition is not mapped. Element SpecimenDefinition.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element SpecimenDefinition.status: http://hl7.org/fhir/StructureDefinition/artifact-status. A nominal state-transition diagram can be found in the Definition pattern documentation Unknown does not represent "other" - one of the defined statuses must apply. Unknown is used when the authoring system is not sure what the current status is.

See guidance around (not) making local changes to elements here.

Control 1..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-status)

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

72. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Summary true

74. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see Basic Resource Types
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

Codes for identifying types of resources not yet defined by FHIR

Type

CodeableConcept

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

76. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Summary true

Requirements

Needed for partitioning the resource by Patient.

78. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

80. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, Patient, RelatedPerson)

Summary true

Requirements

Needed for partitioning the resource.