Profile_R5_DeviceDefinition_R3 - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R5_DeviceDefinition_R3 - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the profile-DeviceDefinition resource profile.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition	Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.
Short	Resource for non-supported content
Control	0..*
Alternate Names	Z-resource, Extension-resource, Custom-resource
Invariants	dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (`contained.contained.empty()`) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (`contained.text.empty()`) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (`contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()`) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (`contained.where(('#'+id in %resource.descendants().reference).not()).empty()`) dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty()) dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty()) dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty()) dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition	A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.
Short	A set of rules under which this content was created
Comments	Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.
Control	0..1
Type	uri
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Summary	true
4. Basic.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Basic.extension:description
Slice Name	description
Definition	R5: `DeviceDefinition.description` (new:markdown)
Short	R5: Additional information to describe the device (new)
Comments	Element `DeviceDefinition.description` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.description`: `http://hl7.org/fhir/StructureDefinition/artifact-description`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-description`)
8. Basic.extension:udiDeviceIdentifier
Slice Name	udiDeviceIdentifier
Definition	R5: `DeviceDefinition.udiDeviceIdentifier` (new:BackboneElement)
Short	R5: Unique Device Identifier (UDI) Barcode string (new)
Comments	Element `DeviceDefinition.udiDeviceIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.udiDeviceIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
10. Basic.extension:regulatoryIdentifier
Slice Name	regulatoryIdentifier
Definition	R5: `DeviceDefinition.regulatoryIdentifier` (new:BackboneElement)
Short	R5: Regulatory identifier(s) associated with this device (new)
Comments	Element `DeviceDefinition.regulatoryIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.regulatoryIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This should not be used for regulatory authorization numbers which are to be captured elsewhere.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Regulatory identifier(s) associated with this device (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
12. Basic.extension:partNumber
Slice Name	partNumber
Definition	R5: `DeviceDefinition.partNumber` (new:string)
Short	R5: The part number or catalog number of the device (new)
Comments	Element `DeviceDefinition.partNumber` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.partNumber` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Alphanumeric Maximum 20.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: The part number or catalog number of the device (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
14. Basic.extension:manufacturer
Slice Name	manufacturer
Definition	R5: `DeviceDefinition.manufacturer` (new:Reference(Organization))
Short	R5: Name of device manufacturer (new)
Comments	Element `DeviceDefinition.manufacturer` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.manufacturer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Name of device manufacturer (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
16. Basic.extension:deviceName
Slice Name	deviceName
Definition	R5: `DeviceDefinition.deviceName` (new:BackboneElement)
Short	R5: The name or names of the device as given by the manufacturer (new)
Comments	Element `DeviceDefinition.deviceName` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.deviceName` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: The name or names of the device as given by the manufacturer (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
18. Basic.extension:modelNumber
Slice Name	modelNumber
Definition	R5: `DeviceDefinition.modelNumber` (new:string)
Short	R5: The catalog or model number for the device for example as defined by the manufacturer (new)
Comments	Element `DeviceDefinition.modelNumber` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.modelNumber` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: The catalog or model number for the device for example as defined by the manufacturer (new)) (Extension Type: string)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
20. Basic.extension:classification
Slice Name	classification
Definition	R5: `DeviceDefinition.classification` (new:BackboneElement)
Short	R5: What kind of device or device system this is (new)
Comments	Element `DeviceDefinition.classification` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.classification` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). In this element various classifications can be used, such as GMDN, EMDN, SNOMED CT, risk classes, national product codes.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: What kind of device or device system this is (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
22. Basic.extension:conformsTo
Slice Name	conformsTo
Definition	R5: `DeviceDefinition.conformsTo` (new:BackboneElement)
Short	R5: Identifies the standards, specifications, or formal guidances for the capabilities supported by the device (new)
Comments	Element `DeviceDefinition.conformsTo` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.conformsTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.conformsTo`: `http://hl7.org/fhir/StructureDefinition/device-conformsTo`.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/device-conformsTo`)
24. Basic.extension:hasPart
Slice Name	hasPart
Definition	R5: `DeviceDefinition.hasPart` (new:BackboneElement)
Short	R5: A device, part of the current one (new)
Comments	Element `DeviceDefinition.hasPart` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.hasPart` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: A device, part of the current one (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
26. Basic.extension:packaging
Slice Name	packaging
Definition	R5: `DeviceDefinition.packaging` (new:BackboneElement)
Short	R5: Information about the packaging of the device, i.e. how the device is packaged (new)
Comments	Element `DeviceDefinition.packaging` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
28. Basic.extension:udiDeviceIdentifier
Slice Name	udiDeviceIdentifier
Definition	R5: `DeviceDefinition.packaging.udiDeviceIdentifier` (new:DeviceDefinition.udiDeviceIdentifier)
Short	R5: Unique Device Identifier (UDI) Barcode string on the packaging (new)
Comments	Element `DeviceDefinition.packaging.udiDeviceIdentifier` is part of an existing definition because parent element `DeviceDefinition.packaging` requires a cross-version extension. Element `DeviceDefinition.packaging.udiDeviceIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging.udiDeviceIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
30. Basic.extension:packaging
Slice Name	packaging
Definition	R5: `DeviceDefinition.packaging.packaging` (new:DeviceDefinition.packaging)
Short	R5: Allows packages within packages (new)
Comments	Element `DeviceDefinition.packaging.packaging` is part of an existing definition because parent element `DeviceDefinition.packaging` requires a cross-version extension. Element `DeviceDefinition.packaging.packaging` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging.packaging` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
32. Basic.extension:version
Slice Name	version
Definition	R5: `DeviceDefinition.version` (new:BackboneElement)
Short	R5: The version of the device or software (new)
Comments	Element `DeviceDefinition.version` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: The version of the device or software (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
34. Basic.extension:safety
Slice Name	safety
Definition	R5: `DeviceDefinition.safety` (new:CodeableConcept)
Short	R5: Safety characteristics of the device (new)
Comments	Element `DeviceDefinition.safety` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.safety` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Safety characteristics of the device (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
36. Basic.extension:shelfLifeStorage
Slice Name	shelfLifeStorage
Definition	R5: `DeviceDefinition.shelfLifeStorage` (new:ProductShelfLife)
Short	R5: Shelf Life and storage information (new)
Comments	Element `DeviceDefinition.shelfLifeStorage` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.shelfLifeStorage` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Shelf Life and storage information (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
38. Basic.extension:languageCode
Slice Name	languageCode
Definition	R5: `DeviceDefinition.languageCode` (new:CodeableConcept)
Short	R5: Language code for the human-readable text strings produced by the device (all supported) (new)
Comments	Element `DeviceDefinition.languageCode` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.languageCode` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Language code for the human-readable text strings produced by the device (all supported) (new)) (Extension Type: CodeableConcept)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
40. Basic.extension:property
Slice Name	property
Definition	R5: `DeviceDefinition.property` (new:BackboneElement)
Short	R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)
Comments	Element `DeviceDefinition.property` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.property` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Dynamic or current properties, such as settings, of an individual device are described using a Device instance-specific DeviceMetric and recorded using Observation. Static characteristics of an individual device could also be documented in a [Device] instance. The Device instance's properties, and their values, could be, but need not be, the same as in the associated DeviceDefinition.
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
42. Basic.extension:owner
Slice Name	owner
Definition	R5: `DeviceDefinition.owner` (new:Reference(Organization))
Short	R5: Organization responsible for device (new)
Comments	Element `DeviceDefinition.owner` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.owner` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Organization responsible for device (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
44. Basic.extension:contact
Slice Name	contact
Definition	R5: `DeviceDefinition.contact` (new:ContactPoint)
Short	R5: Details for human/organization for support (new)
Comments	Element `DeviceDefinition.contact` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.contact`: `http://hl7.org/fhir/StructureDefinition/artifact-contact`. used for troubleshooting etc.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-contact`)
46. Basic.extension:link
Slice Name	link
Definition	R5: `DeviceDefinition.link` (new:BackboneElement)
Short	R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)
Comments	Element `DeviceDefinition.link` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.link` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
48. Basic.extension:note
Slice Name	note
Definition	R5: `DeviceDefinition.note` (new:Annotation)
Short	R5: Device notes and comments (new)
Comments	Element `DeviceDefinition.note` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.note` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Device notes and comments (new)) (Extension Type: Annotation)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
50. Basic.extension:material
Slice Name	material
Definition	R5: `DeviceDefinition.material` (new:BackboneElement)
Short	R5: A substance used to create the material(s) of which the device is made (new)
Comments	Element `DeviceDefinition.material` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: A substance used to create the material(s) of which the device is made (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
52. Basic.extension:productionIdentifierInUDI
Slice Name	productionIdentifierInUDI
Definition	R5: `DeviceDefinition.productionIdentifierInUDI` (new:code)
Short	R5: lot-number \| manufactured-date \| serial-number \| expiration-date \| biological-source \| software-version (new)
Comments	Element `DeviceDefinition.productionIdentifierInUDI` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.productionIdentifierInUDI` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: lot-number \| manufactured-date \| serial-number \| expiration-date \| biological-source \| software-version (new)) (Extension Type: code)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
54. Basic.extension:guideline
Slice Name	guideline
Definition	R5: `DeviceDefinition.guideline` (new:BackboneElement)
Short	R5: Information aimed at providing directions for the usage of this model of device (new)
Comments	Element `DeviceDefinition.guideline` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.guideline` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For more structured data, a ClinicalUseDefinition that points to the DeviceDefinition can be used.
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Information aimed at providing directions for the usage of this model of device (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
56. Basic.extension:correctiveAction
Slice Name	correctiveAction
Definition	R5: `DeviceDefinition.correctiveAction` (new:BackboneElement)
Short	R5: Tracking of latest field safety corrective action (new)
Comments	Element `DeviceDefinition.correctiveAction` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.correctiveAction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1 This element is affected by the following invariants: ele-1
Type	Extension(R5: Tracking of latest field safety corrective action (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
58. Basic.extension:chargeItem
Slice Name	chargeItem
Definition	R5: `DeviceDefinition.chargeItem` (new:BackboneElement)
Short	R5: Billing code or reference associated with the device (new)
Comments	Element `DeviceDefinition.chargeItem` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.chargeItem` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Type	Extension(R5: Billing code or reference associated with the device (new)) (Complex Extension)
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
60. Basic.modifierExtension
Definition	May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.
Short	Extensions that cannot be ignored
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Alternate Names	extensions, user content
62. Basic.code
Definition	Identifies the 'type' of resource - equivalent to the resource name for other resources.
Short	Kind of Resource
Comments	Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code. This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.
Control	1..1
Binding	For example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2 (example to `http://hl7.org/fhir/ValueSet/basic-resource-type\|3.0.2`) Codes for identifying types of resources not yet defined by FHIR
Type	CodeableConcept
Is Modifier	true because No Modifier Reason provideed in previous versions of FHIR
Summary	true
Requirements	Must be able to distinguish different types of Basic resources.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
2. Basic.extension
Control	0..*
Slicing	This element introduces a set of slices on `Basic.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Basic.extension:description
Slice Name	description
Definition	R5: `DeviceDefinition.description` (new:markdown)
Short	R5: Additional information to describe the device (new)
Comments	Element `DeviceDefinition.description` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.description` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.description`: `http://hl7.org/fhir/StructureDefinition/artifact-description`.
Control	0..1
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-description`)
6. Basic.extension:udiDeviceIdentifier
Slice Name	udiDeviceIdentifier
Definition	R5: `DeviceDefinition.udiDeviceIdentifier` (new:BackboneElement)
Short	R5: Unique Device Identifier (UDI) Barcode string (new)
Comments	Element `DeviceDefinition.udiDeviceIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.udiDeviceIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)
8. Basic.extension:regulatoryIdentifier
Slice Name	regulatoryIdentifier
Definition	R5: `DeviceDefinition.regulatoryIdentifier` (new:BackboneElement)
Short	R5: Regulatory identifier(s) associated with this device (new)
Comments	Element `DeviceDefinition.regulatoryIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.regulatoryIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This should not be used for regulatory authorization numbers which are to be captured elsewhere.
Control	0..*
Type	Extension(R5: Regulatory identifier(s) associated with this device (new)) (Complex Extension)
10. Basic.extension:partNumber
Slice Name	partNumber
Definition	R5: `DeviceDefinition.partNumber` (new:string)
Short	R5: The part number or catalog number of the device (new)
Comments	Element `DeviceDefinition.partNumber` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.partNumber` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Alphanumeric Maximum 20.
Control	0..1
Type	Extension(R5: The part number or catalog number of the device (new)) (Extension Type: string)
12. Basic.extension:manufacturer
Slice Name	manufacturer
Definition	R5: `DeviceDefinition.manufacturer` (new:Reference(Organization))
Short	R5: Name of device manufacturer (new)
Comments	Element `DeviceDefinition.manufacturer` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.manufacturer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Name of device manufacturer (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
14. Basic.extension:deviceName
Slice Name	deviceName
Definition	R5: `DeviceDefinition.deviceName` (new:BackboneElement)
Short	R5: The name or names of the device as given by the manufacturer (new)
Comments	Element `DeviceDefinition.deviceName` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.deviceName` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: The name or names of the device as given by the manufacturer (new)) (Complex Extension)
16. Basic.extension:modelNumber
Slice Name	modelNumber
Definition	R5: `DeviceDefinition.modelNumber` (new:string)
Short	R5: The catalog or model number for the device for example as defined by the manufacturer (new)
Comments	Element `DeviceDefinition.modelNumber` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.modelNumber` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: The catalog or model number for the device for example as defined by the manufacturer (new)) (Extension Type: string)
18. Basic.extension:classification
Slice Name	classification
Definition	R5: `DeviceDefinition.classification` (new:BackboneElement)
Short	R5: What kind of device or device system this is (new)
Comments	Element `DeviceDefinition.classification` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.classification` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). In this element various classifications can be used, such as GMDN, EMDN, SNOMED CT, risk classes, national product codes.
Control	0..*
Type	Extension(R5: What kind of device or device system this is (new)) (Complex Extension)
20. Basic.extension:conformsTo
Slice Name	conformsTo
Definition	R5: `DeviceDefinition.conformsTo` (new:BackboneElement)
Short	R5: Identifies the standards, specifications, or formal guidances for the capabilities supported by the device (new)
Comments	Element `DeviceDefinition.conformsTo` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.conformsTo` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.conformsTo`: `http://hl7.org/fhir/StructureDefinition/device-conformsTo`.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/device-conformsTo`)
22. Basic.extension:hasPart
Slice Name	hasPart
Definition	R5: `DeviceDefinition.hasPart` (new:BackboneElement)
Short	R5: A device, part of the current one (new)
Comments	Element `DeviceDefinition.hasPart` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.hasPart` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: A device, part of the current one (new)) (Complex Extension)
24. Basic.extension:packaging
Slice Name	packaging
Definition	R5: `DeviceDefinition.packaging` (new:BackboneElement)
Short	R5: Information about the packaging of the device, i.e. how the device is packaged (new)
Comments	Element `DeviceDefinition.packaging` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)
26. Basic.extension:udiDeviceIdentifier
Slice Name	udiDeviceIdentifier
Definition	R5: `DeviceDefinition.packaging.udiDeviceIdentifier` (new:DeviceDefinition.udiDeviceIdentifier)
Short	R5: Unique Device Identifier (UDI) Barcode string on the packaging (new)
Comments	Element `DeviceDefinition.packaging.udiDeviceIdentifier` is part of an existing definition because parent element `DeviceDefinition.packaging` requires a cross-version extension. Element `DeviceDefinition.packaging.udiDeviceIdentifier` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging.udiDeviceIdentifier` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)
28. Basic.extension:packaging
Slice Name	packaging
Definition	R5: `DeviceDefinition.packaging.packaging` (new:DeviceDefinition.packaging)
Short	R5: Allows packages within packages (new)
Comments	Element `DeviceDefinition.packaging.packaging` is part of an existing definition because parent element `DeviceDefinition.packaging` requires a cross-version extension. Element `DeviceDefinition.packaging.packaging` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.packaging.packaging` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)
30. Basic.extension:version
Slice Name	version
Definition	R5: `DeviceDefinition.version` (new:BackboneElement)
Short	R5: The version of the device or software (new)
Comments	Element `DeviceDefinition.version` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.version` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: The version of the device or software (new)) (Complex Extension)
32. Basic.extension:safety
Slice Name	safety
Definition	R5: `DeviceDefinition.safety` (new:CodeableConcept)
Short	R5: Safety characteristics of the device (new)
Comments	Element `DeviceDefinition.safety` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.safety` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Safety characteristics of the device (new)) (Extension Type: CodeableConcept)
34. Basic.extension:shelfLifeStorage
Slice Name	shelfLifeStorage
Definition	R5: `DeviceDefinition.shelfLifeStorage` (new:ProductShelfLife)
Short	R5: Shelf Life and storage information (new)
Comments	Element `DeviceDefinition.shelfLifeStorage` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.shelfLifeStorage` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Shelf Life and storage information (new)) (Complex Extension)
36. Basic.extension:languageCode
Slice Name	languageCode
Definition	R5: `DeviceDefinition.languageCode` (new:CodeableConcept)
Short	R5: Language code for the human-readable text strings produced by the device (all supported) (new)
Comments	Element `DeviceDefinition.languageCode` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.languageCode` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Language code for the human-readable text strings produced by the device (all supported) (new)) (Extension Type: CodeableConcept)
38. Basic.extension:property
Slice Name	property
Definition	R5: `DeviceDefinition.property` (new:BackboneElement)
Short	R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)
Comments	Element `DeviceDefinition.property` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.property` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Dynamic or current properties, such as settings, of an individual device are described using a Device instance-specific DeviceMetric and recorded using Observation. Static characteristics of an individual device could also be documented in a [Device] instance. The Device instance's properties, and their values, could be, but need not be, the same as in the associated DeviceDefinition.
Control	0..*
Type	Extension(R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)) (Complex Extension)
40. Basic.extension:owner
Slice Name	owner
Definition	R5: `DeviceDefinition.owner` (new:Reference(Organization))
Short	R5: Organization responsible for device (new)
Comments	Element `DeviceDefinition.owner` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.owner` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Organization responsible for device (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
42. Basic.extension:contact
Slice Name	contact
Definition	R5: `DeviceDefinition.contact` (new:ContactPoint)
Short	R5: Details for human/organization for support (new)
Comments	Element `DeviceDefinition.contact` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.contact` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element `DeviceDefinition.contact`: `http://hl7.org/fhir/StructureDefinition/artifact-contact`. used for troubleshooting etc.
Control	0..*
Type	Extension(`http://hl7.org/fhir/StructureDefinition/artifact-contact`)
44. Basic.extension:link
Slice Name	link
Definition	R5: `DeviceDefinition.link` (new:BackboneElement)
Short	R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)
Comments	Element `DeviceDefinition.link` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.link` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)) (Complex Extension)
46. Basic.extension:note
Slice Name	note
Definition	R5: `DeviceDefinition.note` (new:Annotation)
Short	R5: Device notes and comments (new)
Comments	Element `DeviceDefinition.note` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.note` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Device notes and comments (new)) (Extension Type: Annotation)
48. Basic.extension:material
Slice Name	material
Definition	R5: `DeviceDefinition.material` (new:BackboneElement)
Short	R5: A substance used to create the material(s) of which the device is made (new)
Comments	Element `DeviceDefinition.material` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.material` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: A substance used to create the material(s) of which the device is made (new)) (Complex Extension)
50. Basic.extension:productionIdentifierInUDI
Slice Name	productionIdentifierInUDI
Definition	R5: `DeviceDefinition.productionIdentifierInUDI` (new:code)
Short	R5: lot-number \| manufactured-date \| serial-number \| expiration-date \| biological-source \| software-version (new)
Comments	Element `DeviceDefinition.productionIdentifierInUDI` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.productionIdentifierInUDI` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: lot-number \| manufactured-date \| serial-number \| expiration-date \| biological-source \| software-version (new)) (Extension Type: code)
52. Basic.extension:guideline
Slice Name	guideline
Definition	R5: `DeviceDefinition.guideline` (new:BackboneElement)
Short	R5: Information aimed at providing directions for the usage of this model of device (new)
Comments	Element `DeviceDefinition.guideline` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.guideline` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For more structured data, a ClinicalUseDefinition that points to the DeviceDefinition can be used.
Control	0..1
Type	Extension(R5: Information aimed at providing directions for the usage of this model of device (new)) (Complex Extension)
54. Basic.extension:correctiveAction
Slice Name	correctiveAction
Definition	R5: `DeviceDefinition.correctiveAction` (new:BackboneElement)
Short	R5: Tracking of latest field safety corrective action (new)
Comments	Element `DeviceDefinition.correctiveAction` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.correctiveAction` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..1
Type	Extension(R5: Tracking of latest field safety corrective action (new)) (Complex Extension)
56. Basic.extension:chargeItem
Slice Name	chargeItem
Definition	R5: `DeviceDefinition.chargeItem` (new:BackboneElement)
Short	R5: Billing code or reference associated with the device (new)
Comments	Element `DeviceDefinition.chargeItem` is not mapped to FHIR STU3, since FHIR R5 `DeviceDefinition` is not mapped. Element `DeviceDefinition.chargeItem` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Type	Extension(R5: Billing code or reference associated with the device (new)) (Complex Extension)

Guidance on how to interpret the contents of this table can be foundhere

0. Basic

Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

Short Resource for non-supported content

Control 0..*

Alternate Names Z-resource, Extension-resource, Custom-resource

Invariants dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())

2. Basic.id

Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

Short Logical id of this artifact

Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control 0..1

Type

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

4. Basic.meta

Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

Short Metadata about the resource

Control 0..1

Type

Meta

Summary true

6. Basic.implicitRules

Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

Short A set of rules under which this content was created

Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control 0..1

Type

uri

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

8. Basic.language

Definition

The base language in which the resource is written.

Short Language of the resource content

Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control 0..1

Binding

Unless not suitable, these codes SHALL be taken from Common Languages

(extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

A human language.

Additional Bindings

Purpose

Primitive Value This primitive element may be present, or absent, or replaced by an extension

10. Basic.text

Definition

A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

Short Text summary of the resource, for human interpretation

Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

Control 0..1
This element is affected by the following invariants: dom-1

Type

Narrative

Alternate Names narrative, html, xhtml, display

12. Basic.contained

Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

Short Contained, inline Resources

Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

Control 0..*

Type

Resource

Alternate Names inline resources, anonymous resources, contained resources

14. Basic.extension

Definition

An Extension

Short Extension

Control 0..*

Type

Extension

Slicing

This element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:

value @ url

16. Basic.extension:description

Slice Name description

Definition

R5: DeviceDefinition.description (new:markdown)

Short R5: Additional information to describe the device (new)

Comments

Element DeviceDefinition.description is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.description has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element DeviceDefinition.description: http://hl7.org/fhir/StructureDefinition/artifact-description.

Control 0..1

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-description)

18. Basic.extension:udiDeviceIdentifier

Slice Name udiDeviceIdentifier

Definition

R5: DeviceDefinition.udiDeviceIdentifier (new:BackboneElement)

Short R5: Unique Device Identifier (UDI) Barcode string (new)

Comments

Element DeviceDefinition.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)

Is Modifier false

Invariants ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())

20. Basic.extension:regulatoryIdentifier

Slice Name regulatoryIdentifier

Definition

R5: DeviceDefinition.regulatoryIdentifier (new:BackboneElement)

Short R5: Regulatory identifier(s) associated with this device (new)

Comments

Element DeviceDefinition.regulatoryIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.regulatoryIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). This should not be used for regulatory authorization numbers which are to be captured elsewhere.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Regulatory identifier(s) associated with this device (new)) (Complex Extension)

Is Modifier false

22. Basic.extension:partNumber

Slice Name partNumber

Definition

R5: DeviceDefinition.partNumber (new:string)

Short R5: The part number or catalog number of the device (new)

Comments

Element DeviceDefinition.partNumber is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.partNumber has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Alphanumeric Maximum 20.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: The part number or catalog number of the device (new)) (Extension Type: string)

Is Modifier false

24. Basic.extension:manufacturer

Slice Name manufacturer

Definition

R5: DeviceDefinition.manufacturer (new:Reference(Organization))

Short R5: Name of device manufacturer (new)

Comments

Element DeviceDefinition.manufacturer is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.manufacturer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Name of device manufacturer (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))

Is Modifier false

26. Basic.extension:deviceName

Slice Name deviceName

Definition

R5: DeviceDefinition.deviceName (new:BackboneElement)

Short R5: The name or names of the device as given by the manufacturer (new)

Comments

Element DeviceDefinition.deviceName is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.deviceName has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: The name or names of the device as given by the manufacturer (new)) (Complex Extension)

Is Modifier false

28. Basic.extension:modelNumber

Slice Name modelNumber

Definition

R5: DeviceDefinition.modelNumber (new:string)

Short R5: The catalog or model number for the device for example as defined by the manufacturer (new)

Comments

Element DeviceDefinition.modelNumber is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.modelNumber has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: The catalog or model number for the device for example as defined by the manufacturer (new)) (Extension Type: string)

Is Modifier false

30. Basic.extension:classification

Slice Name classification

Definition

R5: DeviceDefinition.classification (new:BackboneElement)

Short R5: What kind of device or device system this is (new)

Comments

Element DeviceDefinition.classification is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.classification has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). In this element various classifications can be used, such as GMDN, EMDN, SNOMED CT, risk classes, national product codes.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: What kind of device or device system this is (new)) (Complex Extension)

Is Modifier false

32. Basic.extension:conformsTo

Slice Name conformsTo

Definition

R5: DeviceDefinition.conformsTo (new:BackboneElement)

Short R5: Identifies the standards, specifications, or formal guidances for the capabilities supported by the device (new)

Comments

Element DeviceDefinition.conformsTo is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.conformsTo has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element DeviceDefinition.conformsTo: http://hl7.org/fhir/StructureDefinition/device-conformsTo.

Control 0..*

Type Extension(http://hl7.org/fhir/StructureDefinition/device-conformsTo)

34. Basic.extension:hasPart

Slice Name hasPart

Definition

R5: DeviceDefinition.hasPart (new:BackboneElement)

Short R5: A device, part of the current one (new)

Comments

Element DeviceDefinition.hasPart is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.hasPart has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: A device, part of the current one (new)) (Complex Extension)

Is Modifier false

36. Basic.extension:packaging

Slice Name packaging

Definition

R5: DeviceDefinition.packaging (new:BackboneElement)

Short R5: Information about the packaging of the device, i.e. how the device is packaged (new)

Comments

Element DeviceDefinition.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)

Is Modifier false

38. Basic.extension:udiDeviceIdentifier

Slice Name udiDeviceIdentifier

Definition

R5: DeviceDefinition.packaging.udiDeviceIdentifier (new:DeviceDefinition.udiDeviceIdentifier)

Short R5: Unique Device Identifier (UDI) Barcode string on the packaging (new)

Comments

Element DeviceDefinition.packaging.udiDeviceIdentifier is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.udiDeviceIdentifier is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.udiDeviceIdentifier has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Unique Device Identifier (UDI) Barcode string (new)) (Complex Extension)

Is Modifier false

40. Basic.extension:packaging

Slice Name packaging

Definition

R5: DeviceDefinition.packaging.packaging (new:DeviceDefinition.packaging)

Short R5: Allows packages within packages (new)

Comments

Element DeviceDefinition.packaging.packaging is part of an existing definition because parent element DeviceDefinition.packaging requires a cross-version extension. Element DeviceDefinition.packaging.packaging is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.packaging.packaging has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Information about the packaging of the device, i.e. how the device is packaged (new)) (Complex Extension)

Is Modifier false

42. Basic.extension:version

Slice Name version

Definition

R5: DeviceDefinition.version (new:BackboneElement)

Short R5: The version of the device or software (new)

Comments

Element DeviceDefinition.version is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.version has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: The version of the device or software (new)) (Complex Extension)

Is Modifier false

44. Basic.extension:safety

Slice Name safety

Definition

R5: DeviceDefinition.safety (new:CodeableConcept)

Short R5: Safety characteristics of the device (new)

Comments

Element DeviceDefinition.safety is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.safety has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Safety characteristics of the device (new)) (Extension Type: CodeableConcept)

Is Modifier false

46. Basic.extension:shelfLifeStorage

Slice Name shelfLifeStorage

Definition

R5: DeviceDefinition.shelfLifeStorage (new:ProductShelfLife)

Short R5: Shelf Life and storage information (new)

Comments

Element DeviceDefinition.shelfLifeStorage is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.shelfLifeStorage has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Shelf Life and storage information (new)) (Complex Extension)

Is Modifier false

48. Basic.extension:languageCode

Slice Name languageCode

Definition

R5: DeviceDefinition.languageCode (new:CodeableConcept)

Short R5: Language code for the human-readable text strings produced by the device (all supported) (new)

Comments

Element DeviceDefinition.languageCode is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.languageCode has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Language code for the human-readable text strings produced by the device (all supported) (new)) (Extension Type: CodeableConcept)

Is Modifier false

50. Basic.extension:property

Slice Name property

Definition

R5: DeviceDefinition.property (new:BackboneElement)

Short R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)

Comments

Element DeviceDefinition.property is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.property has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Dynamic or current properties, such as settings, of an individual device are described using a Device instance-specific DeviceMetric and recorded using Observation. Static characteristics of an individual device could also be documented in a [Device] instance. The Device instance's properties, and their values, could be, but need not be, the same as in the associated DeviceDefinition.

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Inherent, essentially fixed, characteristics of this kind of device, e.g., time properties, size, etc (new)) (Complex Extension)

Is Modifier false

52. Basic.extension:owner

Slice Name owner

Definition

R5: DeviceDefinition.owner (new:Reference(Organization))

Short R5: Organization responsible for device (new)

Comments

Element DeviceDefinition.owner is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.owner has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Organization responsible for device (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))

Is Modifier false

54. Basic.extension:contact

Slice Name contact

Definition

R5: DeviceDefinition.contact (new:ContactPoint)

Short R5: Details for human/organization for support (new)

Comments

Element DeviceDefinition.contact is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.contact has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). An externally-defined extension that has been mapped as the representation of FHIR R5 element DeviceDefinition.contact: http://hl7.org/fhir/StructureDefinition/artifact-contact. used for troubleshooting etc.

Control 0..*

Type Extension(http://hl7.org/fhir/StructureDefinition/artifact-contact)

56. Basic.extension:link

Slice Name link

Definition

R5: DeviceDefinition.link (new:BackboneElement)

Short R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)

Comments

Element DeviceDefinition.link is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.link has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: An associated device, attached to, used with, communicating with or linking a previous or new device model to the focal device (new)) (Complex Extension)

Is Modifier false

58. Basic.extension:note

Slice Name note

Definition

R5: DeviceDefinition.note (new:Annotation)

Short R5: Device notes and comments (new)

Comments

Element DeviceDefinition.note is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Device notes and comments (new)) (Extension Type: Annotation)

Is Modifier false

60. Basic.extension:material

Slice Name material

Definition

R5: DeviceDefinition.material (new:BackboneElement)

Short R5: A substance used to create the material(s) of which the device is made (new)

Comments

Element DeviceDefinition.material is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.material has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: A substance used to create the material(s) of which the device is made (new)) (Complex Extension)

Is Modifier false

62. Basic.extension:productionIdentifierInUDI

Slice Name productionIdentifierInUDI

Definition

R5: DeviceDefinition.productionIdentifierInUDI (new:code)

Comments

Element DeviceDefinition.productionIdentifierInUDI is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.productionIdentifierInUDI has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Is Modifier false

64. Basic.extension:guideline

Slice Name guideline

Definition

R5: DeviceDefinition.guideline (new:BackboneElement)

Short R5: Information aimed at providing directions for the usage of this model of device (new)

Comments

Element DeviceDefinition.guideline is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.guideline has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For more structured data, a ClinicalUseDefinition that points to the DeviceDefinition can be used.

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Information aimed at providing directions for the usage of this model of device (new)) (Complex Extension)

Is Modifier false

66. Basic.extension:correctiveAction

Slice Name correctiveAction

Definition

R5: DeviceDefinition.correctiveAction (new:BackboneElement)

Short R5: Tracking of latest field safety corrective action (new)

Comments

Element DeviceDefinition.correctiveAction is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.correctiveAction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..1
This element is affected by the following invariants: ele-1

Type Extension(R5: Tracking of latest field safety corrective action (new)) (Complex Extension)

Is Modifier false

68. Basic.extension:chargeItem

Slice Name chargeItem

Definition

R5: DeviceDefinition.chargeItem (new:BackboneElement)

Short R5: Billing code or reference associated with the device (new)

Comments

Element DeviceDefinition.chargeItem is not mapped to FHIR STU3, since FHIR R5 DeviceDefinition is not mapped. Element DeviceDefinition.chargeItem has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

Control 0..*
This element is affected by the following invariants: ele-1

Type Extension(R5: Billing code or reference associated with the device (new)) (Complex Extension)

Is Modifier false

70. Basic.modifierExtension

Definition

May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Short Extensions that cannot be ignored

Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control 0..*

Type

Extension

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Alternate Names extensions, user content

72. Basic.identifier

Definition

Identifier assigned to the resource for business purposes, outside the context of FHIR.

Short Business identifier

Note This is a business identifier, not a resource identifier (see discussion)

Control 0..*

Type

Identifier

Summary true

74. Basic.code

Definition

Identifies the 'type' of resource - equivalent to the resource name for other resources.

Short Kind of Resource

Comments

Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

Control 1..1

Binding

For example codes, see Basic Resource Types
(example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

Codes for identifying types of resources not yet defined by FHIR

Type

CodeableConcept

Is Modifier true because No Modifier Reason provideed in previous versions of FHIR

Summary true

Requirements

Must be able to distinguish different types of Basic resources.

76. Basic.subject

Definition

Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

Short Identifies the focus of this resource

Comments

Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

Control 0..1

Type Reference(Resource)

Summary true

Requirements

Needed for partitioning the resource by Patient.

78. Basic.created

Definition

Identifies when the resource was first created.

Short When created

Control 0..1

Type

date

Primitive Value This primitive element may be present, or absent, or replaced by an extension

Summary true

Requirements

Allows ordering resource instances by time.

80. Basic.author

Definition

Indicates who was responsible for creating the resource instance.

Short Who created

Control 0..1

Type Reference(Practitioner, Patient, RelatedPerson)

Summary true

Requirements

Needed for partitioning the resource.