Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R5_BiologicallyDerivedProductDispense_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-BiologicallyDerivedProductDispense resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control30..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:basedOn
    Slice NamebasedOn
    Definition

    R5: BiologicallyDerivedProductDispense.basedOn (new:Reference(ServiceRequest))

    ShortR5: The order or request that this dispense is fulfilling (new)
    Comments

    Element BiologicallyDerivedProductDispense.basedOn is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.basedOn has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: The order or request that this dispense is fulfilling (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:partOf
    Slice NamepartOf
    Definition

    R5: BiologicallyDerivedProductDispense.partOf (new:Reference(BiologicallyDerivedProductDispense))

    ShortR5: Short description (new)
    Comments

    Element BiologicallyDerivedProductDispense.partOf is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.partOf has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Short description (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProductDispense for use in FHIR STU3, Basic))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:status
    Slice Namestatus
    Definition

    R5: BiologicallyDerivedProductDispense.status (new:code)

    ShortR5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)
    Comments

    Element BiologicallyDerivedProductDispense.status is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control1..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)) (Extension Type: code)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:originRelationshipType
    Slice NameoriginRelationshipType
    Definition

    R5: BiologicallyDerivedProductDispense.originRelationshipType (new:CodeableConcept)

    ShortR5: Relationship between the donor and intended recipient (new)
    Comments

    Element BiologicallyDerivedProductDispense.originRelationshipType is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.originRelationshipType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Relationship between the donor and intended recipient (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:product
    Slice Nameproduct
    Definition

    R5: BiologicallyDerivedProductDispense.product (new:Reference(BiologicallyDerivedProduct))

    ShortR5: The BiologicallyDerivedProduct that is dispensed (new)
    Comments

    Element BiologicallyDerivedProductDispense.product is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.product has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control1..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: The BiologicallyDerivedProduct that is dispensed (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:patient
    Slice Namepatient
    Definition

    R5: BiologicallyDerivedProductDispense.patient (new:Reference(Patient))

    ShortR5: The intended recipient of the dispensed product (new)
    Comments

    Element BiologicallyDerivedProductDispense.patient is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.patient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control1..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: The intended recipient of the dispensed product (new)) (Extension Type: Reference(Cross-version Profile for R5.Patient for use in FHIR STU3, Patient))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:matchStatus
    Slice NamematchStatus
    Definition

    R5: BiologicallyDerivedProductDispense.matchStatus (new:CodeableConcept)

    ShortR5: Indicates the type of matching associated with the dispense (new)
    Comments

    Element BiologicallyDerivedProductDispense.matchStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.matchStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Indicates the type of matching associated with the dispense (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:performer
    Slice Nameperformer
    Definition

    R5: BiologicallyDerivedProductDispense.performer (new:BackboneElement)

    ShortR5: Indicates who or what performed an action (new)
    Comments

    Element BiologicallyDerivedProductDispense.performer is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.performer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Indicates who or what performed an action (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:location
    Slice Namelocation
    Definition

    R5: BiologicallyDerivedProductDispense.location (new:Reference(Location))

    ShortR5: Where the dispense occurred (new)
    Comments

    Element BiologicallyDerivedProductDispense.location is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.location has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Where the dispense occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.extension:quantity
    Slice Namequantity
    Definition

    R5: BiologicallyDerivedProductDispense.quantity (new:Quantity[SimpleQuantity])

    ShortR5: Amount dispensed (new)
    Comments

    Element BiologicallyDerivedProductDispense.quantity is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.quantity has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Amount dispensed (new)) (Extension Type: Quantity(SimpleQuantity))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Basic.extension:preparedDate
    Slice NamepreparedDate
    Definition

    R5: BiologicallyDerivedProductDispense.preparedDate (new:dateTime)

    ShortR5: When product was selected/matched (new)
    Comments

    Element BiologicallyDerivedProductDispense.preparedDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.preparedDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: When product was selected/matched (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Basic.extension:whenHandedOver
    Slice NamewhenHandedOver
    Definition

    R5: BiologicallyDerivedProductDispense.whenHandedOver (new:dateTime)

    ShortR5: When the product was dispatched (new)
    Comments

    Element BiologicallyDerivedProductDispense.whenHandedOver is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.whenHandedOver has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: When the product was dispatched (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Basic.extension:destination
    Slice Namedestination
    Definition

    R5: BiologicallyDerivedProductDispense.destination (new:Reference(Location))

    ShortR5: Where the product was dispatched to (new)
    Comments

    Element BiologicallyDerivedProductDispense.destination is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.destination has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Where the product was dispatched to (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Basic.extension:note
    Slice Namenote
    Definition

    R5: BiologicallyDerivedProductDispense.note (new:Annotation)

    ShortR5: Additional notes (new)
    Comments

    Element BiologicallyDerivedProductDispense.note is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Additional notes (new)) (Extension Type: Annotation)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. Basic.extension:usageInstruction
    Slice NameusageInstruction
    Definition

    R5: BiologicallyDerivedProductDispense.usageInstruction (new:string)

    ShortR5: Specific instructions for use (new)
    Comments

    Element BiologicallyDerivedProductDispense.usageInstruction is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.usageInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Specific instructions for use (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    36. Basic.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    38. Basic.code
    Definition

    Identifies the 'type' of resource - equivalent to the resource name for other resources.

    ShortKind of Resource
    Comments

    Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

    This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

    Control1..1
    BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
    (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

    Codes for identifying types of resources not yet defined by FHIR

    TypeCodeableConcept
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Summarytrue
    Requirements

    Must be able to distinguish different types of Basic resources.

    Guidance on how to interpret the contents of this table can be foundhere

    0. Basic
    2. Basic.extension
    Control3..*
    SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Basic.extension:basedOn
      Slice NamebasedOn
      Definition

      R5: BiologicallyDerivedProductDispense.basedOn (new:Reference(ServiceRequest))

      ShortR5: The order or request that this dispense is fulfilling (new)
      Comments

      Element BiologicallyDerivedProductDispense.basedOn is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.basedOn has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: The order or request that this dispense is fulfilling (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
      6. Basic.extension:partOf
      Slice NamepartOf
      Definition

      R5: BiologicallyDerivedProductDispense.partOf (new:Reference(BiologicallyDerivedProductDispense))

      ShortR5: Short description (new)
      Comments

      Element BiologicallyDerivedProductDispense.partOf is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.partOf has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: Short description (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProductDispense for use in FHIR STU3, Basic))
      8. Basic.extension:status
      Slice Namestatus
      Definition

      R5: BiologicallyDerivedProductDispense.status (new:code)

      ShortR5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)
      Comments

      Element BiologicallyDerivedProductDispense.status is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control1..1
      TypeExtension(R5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)) (Extension Type: code)
      10. Basic.extension:originRelationshipType
      Slice NameoriginRelationshipType
      Definition

      R5: BiologicallyDerivedProductDispense.originRelationshipType (new:CodeableConcept)

      ShortR5: Relationship between the donor and intended recipient (new)
      Comments

      Element BiologicallyDerivedProductDispense.originRelationshipType is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.originRelationshipType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Relationship between the donor and intended recipient (new)) (Extension Type: CodeableConcept)
      12. Basic.extension:product
      Slice Nameproduct
      Definition

      R5: BiologicallyDerivedProductDispense.product (new:Reference(BiologicallyDerivedProduct))

      ShortR5: The BiologicallyDerivedProduct that is dispensed (new)
      Comments

      Element BiologicallyDerivedProductDispense.product is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.product has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control1..1
      TypeExtension(R5: The BiologicallyDerivedProduct that is dispensed (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
      14. Basic.extension:patient
      Slice Namepatient
      Definition

      R5: BiologicallyDerivedProductDispense.patient (new:Reference(Patient))

      ShortR5: The intended recipient of the dispensed product (new)
      Comments

      Element BiologicallyDerivedProductDispense.patient is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.patient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control1..1
      TypeExtension(R5: The intended recipient of the dispensed product (new)) (Extension Type: Reference(Cross-version Profile for R5.Patient for use in FHIR STU3, Patient))
      16. Basic.extension:matchStatus
      Slice NamematchStatus
      Definition

      R5: BiologicallyDerivedProductDispense.matchStatus (new:CodeableConcept)

      ShortR5: Indicates the type of matching associated with the dispense (new)
      Comments

      Element BiologicallyDerivedProductDispense.matchStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.matchStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Indicates the type of matching associated with the dispense (new)) (Extension Type: CodeableConcept)
      18. Basic.extension:performer
      Slice Nameperformer
      Definition

      R5: BiologicallyDerivedProductDispense.performer (new:BackboneElement)

      ShortR5: Indicates who or what performed an action (new)
      Comments

      Element BiologicallyDerivedProductDispense.performer is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.performer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: Indicates who or what performed an action (new)) (Complex Extension)
      20. Basic.extension:location
      Slice Namelocation
      Definition

      R5: BiologicallyDerivedProductDispense.location (new:Reference(Location))

      ShortR5: Where the dispense occurred (new)
      Comments

      Element BiologicallyDerivedProductDispense.location is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.location has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Where the dispense occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
      22. Basic.extension:quantity
      Slice Namequantity
      Definition

      R5: BiologicallyDerivedProductDispense.quantity (new:Quantity[SimpleQuantity])

      ShortR5: Amount dispensed (new)
      Comments

      Element BiologicallyDerivedProductDispense.quantity is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.quantity has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Amount dispensed (new)) (Extension Type: Quantity(SimpleQuantity))
      24. Basic.extension:preparedDate
      Slice NamepreparedDate
      Definition

      R5: BiologicallyDerivedProductDispense.preparedDate (new:dateTime)

      ShortR5: When product was selected/matched (new)
      Comments

      Element BiologicallyDerivedProductDispense.preparedDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.preparedDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: When product was selected/matched (new)) (Extension Type: dateTime)
      26. Basic.extension:whenHandedOver
      Slice NamewhenHandedOver
      Definition

      R5: BiologicallyDerivedProductDispense.whenHandedOver (new:dateTime)

      ShortR5: When the product was dispatched (new)
      Comments

      Element BiologicallyDerivedProductDispense.whenHandedOver is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.whenHandedOver has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: When the product was dispatched (new)) (Extension Type: dateTime)
      28. Basic.extension:destination
      Slice Namedestination
      Definition

      R5: BiologicallyDerivedProductDispense.destination (new:Reference(Location))

      ShortR5: Where the product was dispatched to (new)
      Comments

      Element BiologicallyDerivedProductDispense.destination is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.destination has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Where the product was dispatched to (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
      30. Basic.extension:note
      Slice Namenote
      Definition

      R5: BiologicallyDerivedProductDispense.note (new:Annotation)

      ShortR5: Additional notes (new)
      Comments

      Element BiologicallyDerivedProductDispense.note is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: Additional notes (new)) (Extension Type: Annotation)
      32. Basic.extension:usageInstruction
      Slice NameusageInstruction
      Definition

      R5: BiologicallyDerivedProductDispense.usageInstruction (new:string)

      ShortR5: Specific instructions for use (new)
      Comments

      Element BiologicallyDerivedProductDispense.usageInstruction is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.usageInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Specific instructions for use (new)) (Extension Type: string)

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      Definition

      Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

      ShortResource for non-supported content
      Control0..*
      Alternate NamesZ-resource, Extension-resource, Custom-resource
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
      2. Basic.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      4. Basic.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Summarytrue
      6. Basic.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

      This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

      Control0..1
      Typeuri
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      8. Basic.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Common Languages .
      (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

      A human language.

      Additional BindingsPurpose
      All LanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      10. Basic.text
      Definition

      A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

      Control0..1
      This element is affected by the following invariants: dom-1
      TypeNarrative
      Alternate Namesnarrative, html, xhtml, display
      12. Basic.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

      Control0..*
      TypeResource
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Basic.extension
      Definition

      An Extension

      ShortExtension
      Control3..*
      TypeExtension
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Basic.extension:basedOn
        Slice NamebasedOn
        Definition

        R5: BiologicallyDerivedProductDispense.basedOn (new:Reference(ServiceRequest))

        ShortR5: The order or request that this dispense is fulfilling (new)
        Comments

        Element BiologicallyDerivedProductDispense.basedOn is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.basedOn has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: The order or request that this dispense is fulfilling (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Basic.extension:partOf
        Slice NamepartOf
        Definition

        R5: BiologicallyDerivedProductDispense.partOf (new:Reference(BiologicallyDerivedProductDispense))

        ShortR5: Short description (new)
        Comments

        Element BiologicallyDerivedProductDispense.partOf is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.partOf has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Short description (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProductDispense for use in FHIR STU3, Basic))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Basic.extension:status
        Slice Namestatus
        Definition

        R5: BiologicallyDerivedProductDispense.status (new:code)

        ShortR5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)
        Comments

        Element BiologicallyDerivedProductDispense.status is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.status has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control1..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: preparation | in-progress | allocated | issued | unfulfilled | returned | entered-in-error | unknown (new)) (Extension Type: code)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Basic.extension:originRelationshipType
        Slice NameoriginRelationshipType
        Definition

        R5: BiologicallyDerivedProductDispense.originRelationshipType (new:CodeableConcept)

        ShortR5: Relationship between the donor and intended recipient (new)
        Comments

        Element BiologicallyDerivedProductDispense.originRelationshipType is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.originRelationshipType has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Relationship between the donor and intended recipient (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Basic.extension:product
        Slice Nameproduct
        Definition

        R5: BiologicallyDerivedProductDispense.product (new:Reference(BiologicallyDerivedProduct))

        ShortR5: The BiologicallyDerivedProduct that is dispensed (new)
        Comments

        Element BiologicallyDerivedProductDispense.product is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.product has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control1..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: The BiologicallyDerivedProduct that is dispensed (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Basic.extension:patient
        Slice Namepatient
        Definition

        R5: BiologicallyDerivedProductDispense.patient (new:Reference(Patient))

        ShortR5: The intended recipient of the dispensed product (new)
        Comments

        Element BiologicallyDerivedProductDispense.patient is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.patient has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control1..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: The intended recipient of the dispensed product (new)) (Extension Type: Reference(Cross-version Profile for R5.Patient for use in FHIR STU3, Patient))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Basic.extension:matchStatus
        Slice NamematchStatus
        Definition

        R5: BiologicallyDerivedProductDispense.matchStatus (new:CodeableConcept)

        ShortR5: Indicates the type of matching associated with the dispense (new)
        Comments

        Element BiologicallyDerivedProductDispense.matchStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.matchStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Indicates the type of matching associated with the dispense (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. Basic.extension:performer
        Slice Nameperformer
        Definition

        R5: BiologicallyDerivedProductDispense.performer (new:BackboneElement)

        ShortR5: Indicates who or what performed an action (new)
        Comments

        Element BiologicallyDerivedProductDispense.performer is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.performer has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Indicates who or what performed an action (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Basic.extension:location
        Slice Namelocation
        Definition

        R5: BiologicallyDerivedProductDispense.location (new:Reference(Location))

        ShortR5: Where the dispense occurred (new)
        Comments

        Element BiologicallyDerivedProductDispense.location is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.location has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Where the dispense occurred (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Basic.extension:quantity
        Slice Namequantity
        Definition

        R5: BiologicallyDerivedProductDispense.quantity (new:Quantity[SimpleQuantity])

        ShortR5: Amount dispensed (new)
        Comments

        Element BiologicallyDerivedProductDispense.quantity is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.quantity has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Amount dispensed (new)) (Extension Type: Quantity(SimpleQuantity))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Basic.extension:preparedDate
        Slice NamepreparedDate
        Definition

        R5: BiologicallyDerivedProductDispense.preparedDate (new:dateTime)

        ShortR5: When product was selected/matched (new)
        Comments

        Element BiologicallyDerivedProductDispense.preparedDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.preparedDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: When product was selected/matched (new)) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. Basic.extension:whenHandedOver
        Slice NamewhenHandedOver
        Definition

        R5: BiologicallyDerivedProductDispense.whenHandedOver (new:dateTime)

        ShortR5: When the product was dispatched (new)
        Comments

        Element BiologicallyDerivedProductDispense.whenHandedOver is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.whenHandedOver has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: When the product was dispatched (new)) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        40. Basic.extension:destination
        Slice Namedestination
        Definition

        R5: BiologicallyDerivedProductDispense.destination (new:Reference(Location))

        ShortR5: Where the product was dispatched to (new)
        Comments

        Element BiologicallyDerivedProductDispense.destination is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.destination has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Where the product was dispatched to (new)) (Extension Type: Reference(Cross-version Profile for R5.Location for use in FHIR STU3, Location))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        42. Basic.extension:note
        Slice Namenote
        Definition

        R5: BiologicallyDerivedProductDispense.note (new:Annotation)

        ShortR5: Additional notes (new)
        Comments

        Element BiologicallyDerivedProductDispense.note is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.note has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Additional notes (new)) (Extension Type: Annotation)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        44. Basic.extension:usageInstruction
        Slice NameusageInstruction
        Definition

        R5: BiologicallyDerivedProductDispense.usageInstruction (new:string)

        ShortR5: Specific instructions for use (new)
        Comments

        Element BiologicallyDerivedProductDispense.usageInstruction is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProductDispense is not mapped. Element BiologicallyDerivedProductDispense.usageInstruction has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Specific instructions for use (new)) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        46. Basic.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Alternate Namesextensions, user content
        48. Basic.identifier
        Definition

        Identifier assigned to the resource for business purposes, outside the context of FHIR.

        ShortBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Summarytrue
        50. Basic.code
        Definition

        Identifies the 'type' of resource - equivalent to the resource name for other resources.

        ShortKind of Resource
        Comments

        Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

        This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

        Control1..1
        BindingFor example codes, see Basic Resource Types
        (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

        Codes for identifying types of resources not yet defined by FHIR

        TypeCodeableConcept
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Requirements

        Must be able to distinguish different types of Basic resources.

        52. Basic.subject
        Definition

        Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

        ShortIdentifies the focus of this resource
        Comments

        Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

        Control0..1
        TypeReference(Resource)
        Summarytrue
        Requirements

        Needed for partitioning the resource by Patient.

        54. Basic.created
        Definition

        Identifies when the resource was first created.

        ShortWhen created
        Control0..1
        Typedate
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows ordering resource instances by time.

        56. Basic.author
        Definition

        Indicates who was responsible for creating the resource instance.

        ShortWho created
        Control0..1
        TypeReference(Practitioner, Patient, RelatedPerson)
        Summarytrue
        Requirements

        Needed for partitioning the resource.