Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU International flag

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Resource Profile: Profile_R5_BiologicallyDerivedProduct_R3 - Detailed Descriptions

Page standards status: Trial-use Maturity Level: 0

Definitions for the profile-BiologicallyDerivedProduct resource profile.

Guidance on how to interpret the contents of this table can be foundhere

0. Basic
Definition

Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

ShortResource for non-supported content
Control0..*
Alternate NamesZ-resource, Extension-resource, Custom-resource
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
dom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
2. Basic.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

Control0..1
Typeuri
Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
4. Basic.extension
Definition

An Extension


May be used to represent additional information that is not part of the basic definition of the resource. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

ShortExtensionAdditional Content defined by implementations
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Alternate Namesextensions, user content
SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 6. Basic.extension:productCategory
    Slice NameproductCategory
    Definition

    R5: BiologicallyDerivedProduct.productCategory (new:Coding)

    ShortR5: organ | tissue | fluid | cells | biologicalAgent (new)
    Comments

    Element BiologicallyDerivedProduct.productCategory is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCategory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: organ | tissue | fluid | cells | biologicalAgent (new)) (Extension Type: Coding)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    8. Basic.extension:productCode
    Slice NameproductCode
    Definition

    R5: BiologicallyDerivedProduct.productCode (new:CodeableConcept)

    ShortR5: A code that identifies the kind of this biologically derived product (new)
    Comments

    Element BiologicallyDerivedProduct.productCode is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCode has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: A code that identifies the kind of this biologically derived product (new)) (Extension Type: CodeableConcept)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    10. Basic.extension:parent
    Slice Nameparent
    Definition

    R5: BiologicallyDerivedProduct.parent (new:Reference(BiologicallyDerivedProduct))

    ShortR5: The parent biologically-derived product (new)
    Comments

    Element BiologicallyDerivedProduct.parent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.parent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For products that have multiple collections. For example Peripheral Blood Stem Cells may be collected over several days from a single donor and the donation split into in multiple containers which must be linked to the parent donation.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: The parent biologically-derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    12. Basic.extension:request
    Slice Namerequest
    Definition

    R5: BiologicallyDerivedProduct.request (new:Reference(ServiceRequest))

    ShortR5: Request to obtain and/or infuse this product (new)
    Comments

    Element BiologicallyDerivedProduct.request is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.request has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Request to obtain and/or infuse this product (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    14. Basic.extension:biologicalSourceEvent
    Slice NamebiologicalSourceEvent
    Definition

    R5: BiologicallyDerivedProduct.biologicalSourceEvent (new:Identifier)

    ShortR5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)
    Comments

    Element BiologicallyDerivedProduct.biologicalSourceEvent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.biologicalSourceEvent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Necessary to support mandatory requirements for traceability from donor/source to recipient and vice versa, while also satisfying donor anonymity requirements. The element is defined consistently across BiologicallyDerivedProduct, NutritionProduct, and Device. The identifier references an event that links to a single biological entity such as a blood donor, or to multiple biological entities (e.g. when the product is an embryo or a pooled platelet product). A single biologicalSourceEvent identifier may appear on multiple products of many types derived from a single donation event or source extraction. As an example, a single donation event may provide 2 kidneys and a liver for organ transplantation, 2 corneas for eye surgery, heart valves and arterial tissue for cardiovascular surgery, multiple skin grafts, tendons, multiple shaped bone grafts and a large number of bone putty/paste products; and each of them may be assigned to the same biological source event identifier.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)) (Extension Type: Identifier)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    16. Basic.extension:processingFacility
    Slice NameprocessingFacility
    Definition

    R5: BiologicallyDerivedProduct.processingFacility (new:Reference(Organization))

    ShortR5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)
    Comments

    Element BiologicallyDerivedProduct.processingFacility is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.processingFacility has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Basic.extension:division
    Slice Namedivision
    Definition

    R5: BiologicallyDerivedProduct.division (new:string)

    ShortR5: A unique identifier for an aliquot of a product (new)
    Comments

    Element BiologicallyDerivedProduct.division is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.division has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: A unique identifier for an aliquot of a product (new)) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Basic.extension:productStatus
    Slice NameproductStatus
    Definition

    R5: BiologicallyDerivedProduct.productStatus (new:Coding)

    ShortR5: available | unavailable (new)
    Comments

    Element BiologicallyDerivedProduct.productStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: available | unavailable (new)) (Extension Type: Coding)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Basic.extension:expirationDate
    Slice NameexpirationDate
    Definition

    R5: BiologicallyDerivedProduct.expirationDate (new:dateTime)

    ShortR5: Date, and where relevant time, of expiration (new)
    Comments

    Element BiologicallyDerivedProduct.expirationDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.expirationDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Date, and where relevant time, of expiration (new)) (Extension Type: dateTime)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    24. Basic.extension:collection
    Slice Namecollection
    Definition

    R5: BiologicallyDerivedProduct.collection (new:BackboneElement)

    ShortR5: How this product was collected (new)
    Comments

    Element BiologicallyDerivedProduct.collection is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.collection has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: How this product was collected (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    26. Basic.extension:storageTempRequirements
    Slice NamestorageTempRequirements
    Definition

    R5: BiologicallyDerivedProduct.storageTempRequirements (new:Range)

    ShortR5: Product storage temperature requirements (new)
    Comments

    Element BiologicallyDerivedProduct.storageTempRequirements is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.storageTempRequirements has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be extracted from information held in the Product Description Code.

    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: Product storage temperature requirements (new)) (Extension Type: Range)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    28. Basic.extension:property
    Slice Nameproperty
    Definition

    R5: BiologicallyDerivedProduct.property (new:BackboneElement)

    ShortR5: A property that is specific to this BiologicallyDerviedProduct instance (new)
    Comments

    Element BiologicallyDerivedProduct.property is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.property has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Property can be used to provide information on a wide range of additional information specific to a particular biologicallyDerivedProduct.

    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(R5: A property that is specific to this BiologicallyDerviedProduct instance (new)) (Complex Extension)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    30. Basic.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Alternate Namesextensions, user content
    32. Basic.code
    Definition

    Identifies the 'type' of resource - equivalent to the resource name for other resources.

    ShortKind of Resource
    Comments

    Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

    This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

    Control1..1
    BindingFor example codes, see Basic Resource Typeshttp://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2
    (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

    Codes for identifying types of resources not yet defined by FHIR

    TypeCodeableConcept
    Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
    Summarytrue
    Requirements

    Must be able to distinguish different types of Basic resources.

    Guidance on how to interpret the contents of this table can be foundhere

    0. Basic
    2. Basic.extension
    Control0..*
    SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 4. Basic.extension:productCategory
      Slice NameproductCategory
      Definition

      R5: BiologicallyDerivedProduct.productCategory (new:Coding)

      ShortR5: organ | tissue | fluid | cells | biologicalAgent (new)
      Comments

      Element BiologicallyDerivedProduct.productCategory is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCategory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: organ | tissue | fluid | cells | biologicalAgent (new)) (Extension Type: Coding)
      6. Basic.extension:productCode
      Slice NameproductCode
      Definition

      R5: BiologicallyDerivedProduct.productCode (new:CodeableConcept)

      ShortR5: A code that identifies the kind of this biologically derived product (new)
      Comments

      Element BiologicallyDerivedProduct.productCode is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCode has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: A code that identifies the kind of this biologically derived product (new)) (Extension Type: CodeableConcept)
      8. Basic.extension:parent
      Slice Nameparent
      Definition

      R5: BiologicallyDerivedProduct.parent (new:Reference(BiologicallyDerivedProduct))

      ShortR5: The parent biologically-derived product (new)
      Comments

      Element BiologicallyDerivedProduct.parent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.parent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For products that have multiple collections. For example Peripheral Blood Stem Cells may be collected over several days from a single donor and the donation split into in multiple containers which must be linked to the parent donation.

      Control0..*
      TypeExtension(R5: The parent biologically-derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
      10. Basic.extension:request
      Slice Namerequest
      Definition

      R5: BiologicallyDerivedProduct.request (new:Reference(ServiceRequest))

      ShortR5: Request to obtain and/or infuse this product (new)
      Comments

      Element BiologicallyDerivedProduct.request is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.request has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: Request to obtain and/or infuse this product (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
      12. Basic.extension:biologicalSourceEvent
      Slice NamebiologicalSourceEvent
      Definition

      R5: BiologicallyDerivedProduct.biologicalSourceEvent (new:Identifier)

      ShortR5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)
      Comments

      Element BiologicallyDerivedProduct.biologicalSourceEvent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.biologicalSourceEvent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Necessary to support mandatory requirements for traceability from donor/source to recipient and vice versa, while also satisfying donor anonymity requirements. The element is defined consistently across BiologicallyDerivedProduct, NutritionProduct, and Device. The identifier references an event that links to a single biological entity such as a blood donor, or to multiple biological entities (e.g. when the product is an embryo or a pooled platelet product). A single biologicalSourceEvent identifier may appear on multiple products of many types derived from a single donation event or source extraction. As an example, a single donation event may provide 2 kidneys and a liver for organ transplantation, 2 corneas for eye surgery, heart valves and arterial tissue for cardiovascular surgery, multiple skin grafts, tendons, multiple shaped bone grafts and a large number of bone putty/paste products; and each of them may be assigned to the same biological source event identifier.

      Control0..1
      TypeExtension(R5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)) (Extension Type: Identifier)
      14. Basic.extension:processingFacility
      Slice NameprocessingFacility
      Definition

      R5: BiologicallyDerivedProduct.processingFacility (new:Reference(Organization))

      ShortR5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)
      Comments

      Element BiologicallyDerivedProduct.processingFacility is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.processingFacility has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..*
      TypeExtension(R5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
      16. Basic.extension:division
      Slice Namedivision
      Definition

      R5: BiologicallyDerivedProduct.division (new:string)

      ShortR5: A unique identifier for an aliquot of a product (new)
      Comments

      Element BiologicallyDerivedProduct.division is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.division has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: A unique identifier for an aliquot of a product (new)) (Extension Type: string)
      18. Basic.extension:productStatus
      Slice NameproductStatus
      Definition

      R5: BiologicallyDerivedProduct.productStatus (new:Coding)

      ShortR5: available | unavailable (new)
      Comments

      Element BiologicallyDerivedProduct.productStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: available | unavailable (new)) (Extension Type: Coding)
      20. Basic.extension:expirationDate
      Slice NameexpirationDate
      Definition

      R5: BiologicallyDerivedProduct.expirationDate (new:dateTime)

      ShortR5: Date, and where relevant time, of expiration (new)
      Comments

      Element BiologicallyDerivedProduct.expirationDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.expirationDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: Date, and where relevant time, of expiration (new)) (Extension Type: dateTime)
      22. Basic.extension:collection
      Slice Namecollection
      Definition

      R5: BiologicallyDerivedProduct.collection (new:BackboneElement)

      ShortR5: How this product was collected (new)
      Comments

      Element BiologicallyDerivedProduct.collection is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.collection has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

      Control0..1
      TypeExtension(R5: How this product was collected (new)) (Complex Extension)
      24. Basic.extension:storageTempRequirements
      Slice NamestorageTempRequirements
      Definition

      R5: BiologicallyDerivedProduct.storageTempRequirements (new:Range)

      ShortR5: Product storage temperature requirements (new)
      Comments

      Element BiologicallyDerivedProduct.storageTempRequirements is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.storageTempRequirements has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be extracted from information held in the Product Description Code.

      Control0..1
      TypeExtension(R5: Product storage temperature requirements (new)) (Extension Type: Range)
      26. Basic.extension:property
      Slice Nameproperty
      Definition

      R5: BiologicallyDerivedProduct.property (new:BackboneElement)

      ShortR5: A property that is specific to this BiologicallyDerviedProduct instance (new)
      Comments

      Element BiologicallyDerivedProduct.property is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.property has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Property can be used to provide information on a wide range of additional information specific to a particular biologicallyDerivedProduct.

      Control0..*
      TypeExtension(R5: A property that is specific to this BiologicallyDerviedProduct instance (new)) (Complex Extension)

      Guidance on how to interpret the contents of this table can be foundhere

      0. Basic
      Definition

      Basic is used for handling concepts not yet defined in FHIR, narrative-only resources that don't map to an existing resource, and custom resources not appropriate for inclusion in the FHIR specification.

      ShortResource for non-supported content
      Control0..*
      Alternate NamesZ-resource, Extension-resource, Custom-resource
      Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
      dom-1: If the resource is contained in another resource, it SHALL NOT contain any narrative (contained.text.empty())
      dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
      dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource (contained.where(('#'+id in %resource.descendants().reference).not()).empty())
      2. Basic.id
      Definition

      The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

      ShortLogical id of this artifact
      Comments

      The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

      Control0..1
      Typeid
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      4. Basic.meta
      Definition

      The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content may not always be associated with version changes to the resource.

      ShortMetadata about the resource
      Control0..1
      TypeMeta
      Summarytrue
      6. Basic.implicitRules
      Definition

      A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content.

      ShortA set of rules under which this content was created
      Comments

      Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element.

      This element is labelled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation.

      Control0..1
      Typeuri
      Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      8. Basic.language
      Definition

      The base language in which the resource is written.

      ShortLanguage of the resource content
      Comments

      Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Common Languages .
      (extensible to http://hl7.org/fhir/ValueSet/languages|3.0.2)

      A human language.

      Additional BindingsPurpose
      All LanguagesMax Binding
      Typecode
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      10. Basic.text
      Definition

      A human-readable narrative that contains a summary of the resource, and may be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

      ShortText summary of the resource, for human interpretation
      Comments

      Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded in formation is added later.

      Control0..1
      This element is affected by the following invariants: dom-1
      TypeNarrative
      Alternate Namesnarrative, html, xhtml, display
      12. Basic.contained
      Definition

      These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

      ShortContained, inline Resources
      Comments

      This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again.

      Control0..*
      TypeResource
      Alternate Namesinline resources, anonymous resources, contained resources
      14. Basic.extension
      Definition

      An Extension

      ShortExtension
      Control0..*
      TypeExtension
      SlicingThis element introduces a set of slices on Basic.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
      • value @ url
      • 16. Basic.extension:productCategory
        Slice NameproductCategory
        Definition

        R5: BiologicallyDerivedProduct.productCategory (new:Coding)

        ShortR5: organ | tissue | fluid | cells | biologicalAgent (new)
        Comments

        Element BiologicallyDerivedProduct.productCategory is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCategory has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: organ | tissue | fluid | cells | biologicalAgent (new)) (Extension Type: Coding)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        18. Basic.extension:productCode
        Slice NameproductCode
        Definition

        R5: BiologicallyDerivedProduct.productCode (new:CodeableConcept)

        ShortR5: A code that identifies the kind of this biologically derived product (new)
        Comments

        Element BiologicallyDerivedProduct.productCode is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productCode has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: A code that identifies the kind of this biologically derived product (new)) (Extension Type: CodeableConcept)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        20. Basic.extension:parent
        Slice Nameparent
        Definition

        R5: BiologicallyDerivedProduct.parent (new:Reference(BiologicallyDerivedProduct))

        ShortR5: The parent biologically-derived product (new)
        Comments

        Element BiologicallyDerivedProduct.parent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.parent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). For products that have multiple collections. For example Peripheral Blood Stem Cells may be collected over several days from a single donor and the donation split into in multiple containers which must be linked to the parent donation.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: The parent biologically-derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.BiologicallyDerivedProduct for use in FHIR STU3, Basic))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        22. Basic.extension:request
        Slice Namerequest
        Definition

        R5: BiologicallyDerivedProduct.request (new:Reference(ServiceRequest))

        ShortR5: Request to obtain and/or infuse this product (new)
        Comments

        Element BiologicallyDerivedProduct.request is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.request has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Request to obtain and/or infuse this product (new)) (Extension Type: Reference(Cross-version Profile for R5.ServiceRequest for use in FHIR STU3, ReferralRequest))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        24. Basic.extension:biologicalSourceEvent
        Slice NamebiologicalSourceEvent
        Definition

        R5: BiologicallyDerivedProduct.biologicalSourceEvent (new:Identifier)

        ShortR5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)
        Comments

        Element BiologicallyDerivedProduct.biologicalSourceEvent is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.biologicalSourceEvent has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Necessary to support mandatory requirements for traceability from donor/source to recipient and vice versa, while also satisfying donor anonymity requirements. The element is defined consistently across BiologicallyDerivedProduct, NutritionProduct, and Device. The identifier references an event that links to a single biological entity such as a blood donor, or to multiple biological entities (e.g. when the product is an embryo or a pooled platelet product). A single biologicalSourceEvent identifier may appear on multiple products of many types derived from a single donation event or source extraction. As an example, a single donation event may provide 2 kidneys and a liver for organ transplantation, 2 corneas for eye surgery, heart valves and arterial tissue for cardiovascular surgery, multiple skin grafts, tendons, multiple shaped bone grafts and a large number of bone putty/paste products; and each of them may be assigned to the same biological source event identifier.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: An identifier that supports traceability to the event during which material in this product from one or more biological entities was obtained or pooled (new)) (Extension Type: Identifier)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        26. Basic.extension:processingFacility
        Slice NameprocessingFacility
        Definition

        R5: BiologicallyDerivedProduct.processingFacility (new:Reference(Organization))

        ShortR5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)
        Comments

        Element BiologicallyDerivedProduct.processingFacility is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.processingFacility has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Processing facilities responsible for the labeling and distribution of this biologically derived product (new)) (Extension Type: Reference(Cross-version Profile for R5.Organization for use in FHIR STU3, Organization))
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        28. Basic.extension:division
        Slice Namedivision
        Definition

        R5: BiologicallyDerivedProduct.division (new:string)

        ShortR5: A unique identifier for an aliquot of a product (new)
        Comments

        Element BiologicallyDerivedProduct.division is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.division has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: A unique identifier for an aliquot of a product (new)) (Extension Type: string)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        30. Basic.extension:productStatus
        Slice NameproductStatus
        Definition

        R5: BiologicallyDerivedProduct.productStatus (new:Coding)

        ShortR5: available | unavailable (new)
        Comments

        Element BiologicallyDerivedProduct.productStatus is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.productStatus has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: available | unavailable (new)) (Extension Type: Coding)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        32. Basic.extension:expirationDate
        Slice NameexpirationDate
        Definition

        R5: BiologicallyDerivedProduct.expirationDate (new:dateTime)

        ShortR5: Date, and where relevant time, of expiration (new)
        Comments

        Element BiologicallyDerivedProduct.expirationDate is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.expirationDate has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Date, and where relevant time, of expiration (new)) (Extension Type: dateTime)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        34. Basic.extension:collection
        Slice Namecollection
        Definition

        R5: BiologicallyDerivedProduct.collection (new:BackboneElement)

        ShortR5: How this product was collected (new)
        Comments

        Element BiologicallyDerivedProduct.collection is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.collection has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: How this product was collected (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        36. Basic.extension:storageTempRequirements
        Slice NamestorageTempRequirements
        Definition

        R5: BiologicallyDerivedProduct.storageTempRequirements (new:Range)

        ShortR5: Product storage temperature requirements (new)
        Comments

        Element BiologicallyDerivedProduct.storageTempRequirements is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.storageTempRequirements has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). May be extracted from information held in the Product Description Code.

        Control0..1
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: Product storage temperature requirements (new)) (Extension Type: Range)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        38. Basic.extension:property
        Slice Nameproperty
        Definition

        R5: BiologicallyDerivedProduct.property (new:BackboneElement)

        ShortR5: A property that is specific to this BiologicallyDerviedProduct instance (new)
        Comments

        Element BiologicallyDerivedProduct.property is not mapped to FHIR STU3, since FHIR R5 BiologicallyDerivedProduct is not mapped. Element BiologicallyDerivedProduct.property has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element). Property can be used to provide information on a wide range of additional information specific to a particular biologicallyDerivedProduct.

        Control0..*
        This element is affected by the following invariants: ele-1
        TypeExtension(R5: A property that is specific to this BiologicallyDerviedProduct instance (new)) (Complex Extension)
        Is Modifierfalse
        Invariantsele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))
        ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
        40. Basic.modifierExtension
        Definition

        May be used to represent additional information that is not part of the basic definition of the resource, and that modifies the understanding of the element that contains it. Usually modifier elements provide negation or qualification. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

        ShortExtensions that cannot be ignored
        Comments

        There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

        Control0..*
        TypeExtension
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Alternate Namesextensions, user content
        42. Basic.identifier
        Definition

        Identifier assigned to the resource for business purposes, outside the context of FHIR.

        ShortBusiness identifier
        NoteThis is a business identifier, not a resource identifier (see discussion)
        Control0..*
        TypeIdentifier
        Summarytrue
        44. Basic.code
        Definition

        Identifies the 'type' of resource - equivalent to the resource name for other resources.

        ShortKind of Resource
        Comments

        Because resource references will only be able to indicate 'Basic', the type of reference will need to be specified in a Profile identified as part of the resource. Refer to the resource notes section for information on appropriate terminologies for this code.

        This element is labeled as a modifier because the it defines the meaning of the resource and cannot be ignored.

        Control1..1
        BindingFor example codes, see Basic Resource Types
        (example to http://hl7.org/fhir/ValueSet/basic-resource-type|3.0.2)

        Codes for identifying types of resources not yet defined by FHIR

        TypeCodeableConcept
        Is Modifiertrue because No Modifier Reason provideed in previous versions of FHIR
        Summarytrue
        Requirements

        Must be able to distinguish different types of Basic resources.

        46. Basic.subject
        Definition

        Identifies the patient, practitioner, device or any other resource that is the "focus" of this resource.

        ShortIdentifies the focus of this resource
        Comments

        Optional as not all potential resources will have subjects. Resources associated with multiple subjects can handle this via extension.

        Control0..1
        TypeReference(Resource)
        Summarytrue
        Requirements

        Needed for partitioning the resource by Patient.

        48. Basic.created
        Definition

        Identifies when the resource was first created.

        ShortWhen created
        Control0..1
        Typedate
        Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
        Summarytrue
        Requirements

        Allows ordering resource instances by time.

        50. Basic.author
        Definition

        Indicates who was responsible for creating the resource instance.

        ShortWho created
        Control0..1
        TypeReference(Practitioner, Patient, RelatedPerson)
        Summarytrue
        Requirements

        Needed for partitioning the resource.