Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR STU3
0.1.0 - STU
Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions
| Page standards status: Trial-use | Maturity Level: 0 |
Definitions for the ext-R5-TestScript.scope extension.
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: Optional Extension Element - found in all resources. |
| Short | R5: Indication of the artifact(s) that are tested by this test case (new)Optional Extensions Element |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists())ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists()) |
| 2. Extension.extension | |
| Definition | An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | ExtensionAdditional Content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 10..* |
| Type | Extension |
| Alternate Names | extensions, user content |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:artifact | |
| Slice Name | artifact |
| Definition | R5: |
| Short | R5: The specific conformance artifact being tested (new)Additional Content defined by implementations |
| Comments | Element |
| Control | 10..1* |
| Type | Extension |
| Requirements | Element |
| 6. Extension.extension:artifact.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | artifact |
| 8. Extension.extension:artifact.value[x] | |
| Definition | The specific conformance artifact being tested. The canonical reference can be version-specific. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
| Short | The specific conformance artifact being testedValue of extension |
| Control | 10..1 |
| Type | uri(Cross-version Profile for R5.Resource for use in FHIR STU3, Resource), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:conformance | |
| Slice Name | conformance |
| Definition | R5: |
| Short | R5: required | optional | strict (new)Additional Content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Requirements | Element |
| 12. Extension.extension:conformance.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | conformance |
| 14. Extension.extension:conformance.value[x] | |
| Definition | The expectation of whether the test must pass for the system to be considered conformant with the artifact: required - all tests are expected to pass, optional - all test are expected to pass but non-pass status may be allowed, strict - all tests are expected to pass and warnings are treated as a failure. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
| Short | required | optional | strictValue of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see R5TestscriptScopeConformanceCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-conformance-codes-for-R3|0.1.0)The expectation of whether the test must pass for the system to be considered conformant with the artifact. |
| Type | CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 16. Extension.extension:phase | |
| Slice Name | phase |
| Definition | R5: |
| Short | R5: unit | integration | production (new)Additional Content defined by implementations |
| Comments | Element |
| Control | 0..1* |
| Type | Extension |
| Requirements | Element |
| 18. Extension.extension:phase.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | phase |
| 20. Extension.extension:phase.value[x] | |
| Definition | The phase of testing for this artifact: unit - development / implementation phase, integration - internal system to system phase, production - live system to system phase (Note, this may involve pii/phi data). Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
| Short | unit | integration | productionValue of extension |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from For codes, see R5TestscriptScopePhaseCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-phase-codes-for-R3|0.1.0)The phase of testing for this artifact. |
| Type | CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 22. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-TestScript.scope |
| 24. Extension.value[x] | |
| Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
| Short | Value of extension |
| Control | 0..01 |
| Type | Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Indication of the artifact(s) that are tested by this test case (new) |
| Comments | Element |
| Control | 0..* |
| Is Modifier | false |
| 2. Extension.extension | |
| Control | 1..* |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 4. Extension.extension:artifact | |
| Slice Name | artifact |
| Definition | R5: |
| Short | R5: The specific conformance artifact being tested (new) |
| Comments | Element |
| Control | 1..1 |
| Requirements | Element |
| 6. Extension.extension:artifact.url | |
| Control | 1..1 |
| Fixed Value | artifact |
| 8. Extension.extension:artifact.value[x] | |
| Definition | The specific conformance artifact being tested. The canonical reference can be version-specific. |
| Short | The specific conformance artifact being tested |
| Control | 1..1 |
| Type | uri(Cross-version Profile for R5.Resource for use in FHIR STU3, Resource) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 10. Extension.extension:conformance | |
| Slice Name | conformance |
| Definition | R5: |
| Short | R5: required | optional | strict (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 12. Extension.extension:conformance.url | |
| Control | 1..1 |
| Fixed Value | conformance |
| 14. Extension.extension:conformance.value[x] | |
| Definition | The expectation of whether the test must pass for the system to be considered conformant with the artifact: required - all tests are expected to pass, optional - all test are expected to pass but non-pass status may be allowed, strict - all tests are expected to pass and warnings are treated as a failure. |
| Short | required | optional | strict |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from R5TestscriptScopeConformanceCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-conformance-codes-for-R3|0.1.0)The expectation of whether the test must pass for the system to be considered conformant with the artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 16. Extension.extension:phase | |
| Slice Name | phase |
| Definition | R5: |
| Short | R5: unit | integration | production (new) |
| Comments | Element |
| Control | 0..1 |
| Requirements | Element |
| 18. Extension.extension:phase.url | |
| Control | 1..1 |
| Fixed Value | phase |
| 20. Extension.extension:phase.value[x] | |
| Definition | The phase of testing for this artifact: unit - development / implementation phase, integration - internal system to system phase, production - live system to system phase (Note, this may involve pii/phi data). |
| Short | unit | integration | production |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from R5TestscriptScopePhaseCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-phase-codes-for-R3|0.1.0)The phase of testing for this artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 22. Extension.url | |
| Control | 1..1 |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-TestScript.scope |
| 24. Extension.value[x] | |
| Control | 0..0 |
Guidance on how to interpret the contents of this table can be foundhere
| 0. Extension | |
| Definition | R5: |
| Short | R5: Indication of the artifact(s) that are tested by this test case (new) |
| Comments | Element |
| Control | 0..* This element is affected by the following invariants: ele-1 |
| Is Modifier | false |
| Invariants | ele-1: All FHIR elements must have a @value or children (hasValue() | (children().count() > id.count()))ext-1: Must have either extensions or value[x], not both ( extension.exists() != value.exists()) |
| 2. Extension.id | |
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 4. Extension.extension | |
| Definition | An Extension |
| Short | Extension |
| Control | 1..* |
| Type | Extension |
| Slicing | This element introduces a set of slices on Extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 6. Extension.extension:artifact | |
| Slice Name | artifact |
| Definition | R5: |
| Short | R5: The specific conformance artifact being tested (new) |
| Comments | Element |
| Control | 1..1 |
| Type | Extension |
| Requirements | Element |
| 8. Extension.extension:artifact.id | |
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 10. Extension.extension:artifact.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional Content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Alternate Names | extensions, user content |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 12. Extension.extension:artifact.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | artifact |
| 14. Extension.extension:artifact.value[x] | |
| Definition | The specific conformance artifact being tested. The canonical reference can be version-specific. |
| Short | The specific conformance artifact being tested |
| Control | 1..1 |
| Type | uri(Cross-version Profile for R5.Resource for use in FHIR STU3, Resource) |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| 16. Extension.extension:conformance | |
| Slice Name | conformance |
| Definition | R5: |
| Short | R5: required | optional | strict (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Requirements | Element |
| 18. Extension.extension:conformance.id | |
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 20. Extension.extension:conformance.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional Content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Alternate Names | extensions, user content |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 22. Extension.extension:conformance.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | conformance |
| 24. Extension.extension:conformance.value[x] | |
| Definition | The expectation of whether the test must pass for the system to be considered conformant with the artifact: required - all tests are expected to pass, optional - all test are expected to pass but non-pass status may be allowed, strict - all tests are expected to pass and warnings are treated as a failure. |
| Short | required | optional | strict |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from R5TestscriptScopeConformanceCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-conformance-codes-for-R3|0.1.0)The expectation of whether the test must pass for the system to be considered conformant with the artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 26. Extension.extension:phase | |
| Slice Name | phase |
| Definition | R5: |
| Short | R5: unit | integration | production (new) |
| Comments | Element |
| Control | 0..1 |
| Type | Extension |
| Requirements | Element |
| 28. Extension.extension:phase.id | |
| Definition | unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces. |
| Short | xml:id (or equivalent in JSON) |
| Control | 0..1 |
| Type | string |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| 30. Extension.extension:phase.extension | |
| Definition | May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. |
| Short | Additional Content defined by implementations |
| Comments | There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone. |
| Control | 0..* |
| Type | Extension |
| Alternate Names | extensions, user content |
| Slicing | This element introduces a set of slices on Extension.extension.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators: |
| 32. Extension.extension:phase.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | phase |
| 34. Extension.extension:phase.value[x] | |
| Definition | The phase of testing for this artifact: unit - development / implementation phase, integration - internal system to system phase, production - live system to system phase (Note, this may involve pii/phi data). |
| Short | unit | integration | production |
| Control | 0..1 |
| Binding | Unless not suitable, these codes SHALL be taken from R5TestscriptScopePhaseCodesForR3 (0.1.0) (extensible to http://hl7.org/fhir/uv/xver/ValueSet/R5-testscript-scope-phase-codes-for-R3|0.1.0)The phase of testing for this artifact. |
| Type | CodeableConcept |
| [x] Note | SeeChoice of Data Typesfor further information about how to use [x] |
| 36. Extension.url | |
| Definition | Source of the definition for the extension code - a logical name or a URL. |
| Short | identifies the meaning of the extension |
| Comments | The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension. |
| Control | 1..1 |
| Type | uri |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
| XML Format | In the XML format, this property is represented as an attribute. |
| Fixed Value | http://hl7.org/fhir/5.0/StructureDefinition/extension-TestScript.scope |
| 38. Extension.value[x] | |
| Definition | Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list). |
| Short | Value of extension |
| Control | 0..0 |
| Type | Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta |
| Primitive Value | This primitive element may be present, or absent, or replaced by an extension |
IG © 2025+ FHIR Infrastructure. Package hl7.fhir.uv.xver-r5.r3#0.1.0 based on FHIR 3.0.2. Generated 2026-03-20
Links: Table of Contents |
QA Report
| Version History |
|
Propose a change