ExtensionTask_RequestedPerformer - Definitions - Extensions for Using Data Elements from FHIR R5 in FHIR STU3 v0.1.0

Extensions for Using Data Elements from FHIR R5 in FHIR STU3 - Downloaded Version null See the Directory of published versions

Extension: ExtensionTask_RequestedPerformer - Detailed Descriptions

Page standards status: Trial-use

Maturity Level: 0

Definitions for the ext-R5-Task.requestedPerformer extension.

Key Elements Table
Differential Elements Table
Snapshot Elements Table

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Task.requestedPerformer` (new:CodeableReference(Practitioner,PractitionerRole,Organization,CareTeam,HealthcareService,Patient,Device,RelatedPerson)) Optional Extension Element - found in all resources.
Short	R5: Who should perform Task (new)Optional Extensions Element
Comments	Element `Task.requestedPerformer` has a context of ProcessRequest based on following the parent source element upwards and mapping to `ProcessRequest`. Element `Task.requestedPerformer` has a context of ProcessResponse based on following the parent source element upwards and mapping to `ProcessResponse`. Element `Task.requestedPerformer` has a context of Task based on following the parent source element upwards and mapping to `Task`. Element `Task.requestedPerformer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`) ele-1: All FHIR elements must have a @value or children (hasValue() \| (children().count() > id.count())) ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
2. Extension.extension
Definition	An Extension May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	ExtensionAdditional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR STU3
Short	DataType slice for a FHIR R5 `CodeableReference` valueAdditional Content defined by implementations
Control	10..1*
Type	Extension
6. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	10..1
Type	string, date, dateTime, Meta, code, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`CodeableReference`
10. Extension.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)Additional Content defined by implementations
Comments	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
Control	0..1*
Type	Extension
Requirements	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
12. Extension.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`concept`
14. Extension.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Reference to a concept (by class)Value of extension
Control	0..1
Type	CodeableConcept, date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Reference, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)Additional Content defined by implementations
Comments	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
Control	0..1*
Type	Extension
Requirements	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
18. Extension.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`reference`
20. Extension.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced. Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Reference to a resource (by instance)Value of extension
Control	0..1
Type	Reference(Cross-version Profile for R5.Practitioner for use in FHIR STU3, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR STU3, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR STU3, Organization, Cross-version Profile for R5.CareTeam for use in FHIR STU3, CareTeam, Cross-version Profile for R5.HealthcareService for use in FHIR STU3, HealthcareService, Cross-version Profile for R5.Patient for use in FHIR STU3, Patient, Cross-version Profile for R5.Device for use in FHIR STU3, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR STU3, RelatedPerson), date, dateTime, Meta, code, string, Address, Attachment, integer, oid, Count, instant, ContactPoint, HumanName, Money, Identifier, Coding, markdown, SampledData, Ratio, id, positiveInt, Age, Distance, Period, Quantity, Duration, Range, uri, Annotation, boolean, base64Binary, Signature, unsignedInt, time, Timing, decimal, CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Task.requestedPerformer`
24. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..01
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Task.requestedPerformer` (new:CodeableReference(Practitioner,PractitionerRole,Organization,CareTeam,HealthcareService,Patient,Device,RelatedPerson))
Short	R5: Who should perform Task (new)
Comments	Element `Task.requestedPerformer` has a context of ProcessRequest based on following the parent source element upwards and mapping to `ProcessRequest`. Element `Task.requestedPerformer` has a context of ProcessResponse based on following the parent source element upwards and mapping to `ProcessResponse`. Element `Task.requestedPerformer` has a context of Task based on following the parent source element upwards and mapping to `Task`. Element `Task.requestedPerformer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..*
Is Modifier	false
2. Extension.extension
Control	0..*
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
4. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR STU3
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
6. Extension.extension:_datatype.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
8. Extension.extension:_datatype.value[x]
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`CodeableReference`
10. Extension.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
12. Extension.extension:concept.url
Control	1..1
Fixed Value	`concept`
14. Extension.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
16. Extension.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
Control	0..1
Requirements	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
18. Extension.extension:reference.url
Control	1..1
Fixed Value	`reference`
20. Extension.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference(Cross-version Profile for R5.Practitioner for use in FHIR STU3, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR STU3, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR STU3, Organization, Cross-version Profile for R5.CareTeam for use in FHIR STU3, CareTeam, Cross-version Profile for R5.HealthcareService for use in FHIR STU3, HealthcareService, Cross-version Profile for R5.Patient for use in FHIR STU3, Patient, Cross-version Profile for R5.Device for use in FHIR STU3, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR STU3, RelatedPerson)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
22. Extension.url
Control	1..1
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Task.requestedPerformer`
24. Extension.value[x]
Control	0..0

Guidance on how to interpret the contents of this table can be foundhere

0. Extension
Definition	R5: `Task.requestedPerformer` (new:CodeableReference(Practitioner,PractitionerRole,Organization,CareTeam,HealthcareService,Patient,Device,RelatedPerson))
Short	R5: Who should perform Task (new)
Comments	Element `Task.requestedPerformer` has a context of ProcessRequest based on following the parent source element upwards and mapping to `ProcessRequest`. Element `Task.requestedPerformer` has a context of ProcessResponse based on following the parent source element upwards and mapping to `ProcessResponse`. Element `Task.requestedPerformer` has a context of Task based on following the parent source element upwards and mapping to `Task`. Element `Task.requestedPerformer` has no mapping targets in FHIR STU3. Typically, this is because the element has been added (is a new element).
Control	0..* This element is affected by the following invariants: ele-1
Is Modifier	false
Invariants	ele-1: All FHIR elements must have a @value or children (`hasValue() \| (children().count() > id.count())`) ext-1: Must have either extensions or value[x], not both (`extension.exists() != value.exists()`)
2. Extension.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
4. Extension.extension
Definition	An Extension
Short	Extension
Control	0..*
Type	Extension
Slicing	This element introduces a set of slices on `Extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
6. Extension.extension:_datatype
Slice Name	_datatype
Definition	Slice to indicate the presence of a R5 `CodeableReference` in FHIR STU3
Short	DataType slice for a FHIR R5 `CodeableReference` value
Control	1..1
Type	Extension
8. Extension.extension:_datatype.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
10. Extension.extension:_datatype.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
12. Extension.extension:_datatype.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/StructureDefinition/_datatype`
14. Extension.extension:_datatype.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Comments	Must be: CodeableReference
Control	1..1
Type	string
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
Fixed Value	`CodeableReference`
16. Extension.extension:concept
Slice Name	concept
Definition	R5: `CodeableReference.concept`
Short	R5: Reference to a concept (by class)
Comments	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
Control	0..1
Type	Extension
Requirements	Element `CodeableReference.concept` is mapped to FHIR STU3 element `CodeableConcept` as `Equivalent`.
18. Extension.extension:concept.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
20. Extension.extension:concept.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
22. Extension.extension:concept.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`concept`
24. Extension.extension:concept.value[x]
Definition	A reference to a concept - e.g. the information is identified by its general class to the degree of precision found in the terminology.
Short	Reference to a concept (by class)
Control	0..1
Type	CodeableConcept
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
26. Extension.extension:reference
Slice Name	reference
Definition	R5: `CodeableReference.reference`
Short	R5: Reference to a resource (by instance)
Comments	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
Control	0..1
Type	Extension
Requirements	Element `CodeableReference.reference` is mapped to FHIR STU3 element `Reference` as `Equivalent`.
28. Extension.extension:reference.id
Definition	unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.
Short	xml:id (or equivalent in JSON)
Control	0..1
Type	string
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
30. Extension.extension:reference.extension
Definition	May be used to represent additional information that is not part of the basic definition of the element. In order to make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.
Short	Additional Content defined by implementations
Comments	There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.
Control	0..*
Type	Extension
Alternate Names	extensions, user content
Slicing	This element introduces a set of slices on `Extension.extension.extension`. The slices areUnordered and Open, and can be differentiated using the following discriminators: value @ url
32. Extension.extension:reference.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`reference`
34. Extension.extension:reference.value[x]
Definition	A reference to a resource the provides exact details about the information being referenced.
Short	Reference to a resource (by instance)
Control	0..1
Type	Reference(Cross-version Profile for R5.Practitioner for use in FHIR STU3, Practitioner, Cross-version Profile for R5.PractitionerRole for use in FHIR STU3, PractitionerRole, Cross-version Profile for R5.Organization for use in FHIR STU3, Organization, Cross-version Profile for R5.CareTeam for use in FHIR STU3, CareTeam, Cross-version Profile for R5.HealthcareService for use in FHIR STU3, HealthcareService, Cross-version Profile for R5.Patient for use in FHIR STU3, Patient, Cross-version Profile for R5.Device for use in FHIR STU3, Device, Cross-version Profile for R5.RelatedPerson for use in FHIR STU3, RelatedPerson)
[x] Note	SeeChoice of Data Typesfor further information about how to use [x]
36. Extension.url
Definition	Source of the definition for the extension code - a logical name or a URL.
Short	identifies the meaning of the extension
Comments	The definition may point directly to a computable or human-readable definition of the extensibility codes, or it may be a logical URI as declared in some other specification. The definition SHALL be a URI for the Structure Definition defining the extension.
Control	1..1
Type	uri
Primitive Value	This primitive element may be present, or absent, or replaced by an extension
XML Format	In the XML format, this property is represented as an attribute.
Fixed Value	`http://hl7.org/fhir/5.0/StructureDefinition/extension-Task.requestedPerformer`
38. Extension.value[x]
Definition	Value of extension - may be a resource or one of a constrained set of the data types (see Extensibility in the spec for list).
Short	Value of extension
Control	0..0
Type	Choice of: base64Binary, boolean, code, date, dateTime, decimal, id, instant, integer, markdown, oid, positiveInt, string, time, unsignedInt, uri, Address, Age, Annotation, Attachment, CodeableConcept, Coding, ContactPoint, Count, Distance, Duration, HumanName, Identifier, Money, Period, Quantity, Range, Ratio, Reference, SampledData, Signature, Timing, Meta
Primitive Value	This primitive element may be present, or absent, or replaced by an extension